diff options
Diffstat (limited to 'arch/ppc/cpu/mpc8220/cpu_init.c')
| -rw-r--r-- | arch/ppc/cpu/mpc8220/cpu_init.c | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/arch/ppc/cpu/mpc8220/cpu_init.c b/arch/ppc/cpu/mpc8220/cpu_init.c new file mode 100644 index 000000000..8f52c7dd0 --- /dev/null +++ b/arch/ppc/cpu/mpc8220/cpu_init.c @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc8220.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers. + */ +void cpu_init_f (void) +{ + volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB; + volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG; + volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB; + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + + /* Clear all port configuration */ + portcfg->pcfg0 = 0; + portcfg->pcfg1 = 0; + portcfg->pcfg2 = 0; + portcfg->pcfg3 = 0; + portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG; + portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG; + + /* + * Flexbus Controller: configure chip selects and enable them + */ +#if defined (CONFIG_SYS_CS0_BASE) + flexbus->csar0 = CONFIG_SYS_CS0_BASE; + +/* Sorcery-C can hang-up after CTRL reg initialization */ +#if defined (CONFIG_SYS_CS0_CTRL) + flexbus->cscr0 = CONFIG_SYS_CS0_CTRL; +#endif + flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1; + __asm__ volatile ("sync"); +#endif +#if defined (CONFIG_SYS_CS1_BASE) + flexbus->csar1 = CONFIG_SYS_CS1_BASE; + flexbus->cscr1 = CONFIG_SYS_CS1_CTRL; + flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1; + __asm__ volatile ("sync"); +#endif +#if defined (CONFIG_SYS_CS2_BASE) + flexbus->csar2 = CONFIG_SYS_CS2_BASE; + flexbus->cscr2 = CONFIG_SYS_CS2_CTRL; + flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG; + __asm__ volatile ("sync"); +#endif +#if defined (CONFIG_SYS_CS3_BASE) + flexbus->csar3 = CONFIG_SYS_CS3_BASE; + flexbus->cscr3 = CONFIG_SYS_CS3_CTRL; + flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG; + __asm__ volatile ("sync"); +#endif +#if defined (CONFIG_SYS_CS4_BASE) + flexbus->csar4 = CONFIG_SYS_CS4_BASE; + flexbus->cscr4 = CONFIG_SYS_CS4_CTRL; + flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG; + __asm__ volatile ("sync"); +#endif +#if defined (CONFIG_SYS_CS5_BASE) + flexbus->csar5 = CONFIG_SYS_CS5_BASE; + flexbus->cscr5 = CONFIG_SYS_CS5_CTRL; + flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1; + portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG; + __asm__ volatile ("sync"); +#endif + + /* This section of the code cannot place in cpu_init_r(), + it will cause the system to hang */ + /* enable timebase */ + xlbarb->addrTenTimeOut = 0x1000; + xlbarb->dataTenTimeOut = 0x1000; + xlbarb->busActTimeOut = 0x2000; + + xlbarb->config = 0x00002000; + + /* Master Priority Enable */ + xlbarb->mastPriority = 0; + xlbarb->mastPriEn = 0xff; +} + +/* + * initialize higher level parts of CPU like time base and timers + */ +int cpu_init_r (void) +{ + /* this may belongs to disable interrupt section */ + /* mask all interrupts */ + *(vu_long *) 0xf0000700 = 0xfffffc00; + *(vu_long *) 0xf0000714 |= 0x0001ffff; + *(vu_long *) 0xf0000710 &= ~0x00000f00; + + /* route critical ints to normal ints */ + *(vu_long *) 0xf0000710 |= 0x00000001; + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC) + /* load FEC microcode */ + loadtask (0, 2); +#endif + return (0); +} |