diff options
Diffstat (limited to 'arch/powerpc/lib/board.c')
| -rw-r--r-- | arch/powerpc/lib/board.c | 1084 |
1 files changed, 1084 insertions, 0 deletions
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c new file mode 100644 index 000000000..a30acee4f --- /dev/null +++ b/arch/powerpc/lib/board.c @@ -0,0 +1,1084 @@ +/* + * (C) Copyright 2000-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> +#include <command.h> +#include <malloc.h> +#include <stdio_dev.h> +#ifdef CONFIG_8xx +#include <mpc8xx.h> +#endif +#ifdef CONFIG_5xx +#include <mpc5xx.h> +#endif +#ifdef CONFIG_MPC5xxx +#include <mpc5xxx.h> +#endif +#if defined(CONFIG_CMD_IDE) +#include <ide.h> +#endif +#if defined(CONFIG_CMD_SCSI) +#include <scsi.h> +#endif +#if defined(CONFIG_CMD_KGDB) +#include <kgdb.h> +#endif +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif +#include <net.h> +#ifdef CONFIG_GENERIC_MMC +#include <mmc.h> +#endif +#include <serial.h> +#ifdef CONFIG_SYS_ALLOC_DPRAM +#if !defined(CONFIG_CPM2) +#include <commproc.h> +#endif +#endif +#include <version.h> +#if defined(CONFIG_BAB7xx) +#include <w83c553f.h> +#endif +#include <dtt.h> +#if defined(CONFIG_POST) +#include <post.h> +#endif +#if defined(CONFIG_LOGBUFFER) +#include <logbuff.h> +#endif +#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) +#include <asm/cache.h> +#endif +#ifdef CONFIG_PS2KBD +#include <keyboard.h> +#endif + +#ifdef CONFIG_ADDR_MAP +#include <asm/mmu.h> +#endif + +#ifdef CONFIG_MP +#include <asm/mp.h> +#endif + +#ifdef CONFIG_BITBANGMII +#include <miiphy.h> +#endif + +#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE +extern int update_flash_size (int flash_size); +#endif + +#if defined(CONFIG_SC3) +extern void sc3_read_eeprom(void); +#endif + +#if defined(CONFIG_CMD_DOC) +void doc_init (void); +#endif +#if defined(CONFIG_HARD_I2C) || \ + defined(CONFIG_SOFT_I2C) +#include <i2c.h> +#endif +#include <spi.h> +#include <nand.h> + +static char *failed = "*** failed ***\n"; + +#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU) +extern flash_info_t flash_info[]; +#endif + +#if defined(CONFIG_START_IDE) +extern int board_start_ide(void); +#endif +#include <environment.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_ENV_IS_EMBEDDED) +#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN +#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ + (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ + defined(CONFIG_ENV_IS_IN_NVRAM) +#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) +#else +#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN +#endif + +#if !defined(CONFIG_SYS_MEM_TOP_HIDE) +#define CONFIG_SYS_MEM_TOP_HIDE 0 +#endif + +extern ulong __init_end; +extern ulong _end; +ulong monitor_flash_len; + +#if defined(CONFIG_CMD_BEDBUG) +#include <bedbug/type.h> +#endif + +/************************************************************************ + * Utilities * + ************************************************************************ + */ + +/* + * All attempts to come up with a "common" initialization sequence + * that works for all boards and architectures failed: some of the + * requirements are just _too_ different. To get rid of the resulting + * mess of board dependend #ifdef'ed code we now make the whole + * initialization sequence configurable to the user. + * + * The requirements for any new initalization function is simple: it + * receives a pointer to the "global data" structure as it's only + * argument, and returns an integer return code, where 0 means + * "continue" and != 0 means "fatal error, hang the system". + */ +typedef int (init_fnc_t) (void); + +/************************************************************************ + * Init Utilities * + ************************************************************************ + * Some of this code should be moved into the core functions, + * but let's get it working (again) first... + */ + +static int init_baudrate (void) +{ + char tmp[64]; /* long enough for environment variables */ + int i = getenv_r ("baudrate", tmp, sizeof (tmp)); + + gd->baudrate = (i > 0) + ? (int) simple_strtoul (tmp, NULL, 10) + : CONFIG_BAUDRATE; + return (0); +} + +/***********************************************************************/ + +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} +void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); + + +static int init_func_ram (void) +{ +#ifdef CONFIG_BOARD_TYPES + int board_type = gd->board_type; +#else + int board_type = 0; /* use dummy arg */ +#endif + puts ("DRAM: "); + + if ((gd->ram_size = initdram (board_type)) > 0) { + print_size (gd->ram_size, ""); + board_add_ram_info(0); + putc('\n'); + return (0); + } + puts (failed); + return (1); +} + +/***********************************************************************/ + +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +static int init_func_i2c (void) +{ + puts ("I2C: "); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + puts ("ready\n"); + return (0); +} +#endif + +#if defined(CONFIG_HARD_SPI) +static int init_func_spi (void) +{ + puts ("SPI: "); + spi_init (); + puts ("ready\n"); + return (0); +} +#endif + +/***********************************************************************/ + +#if defined(CONFIG_WATCHDOG) +static int init_func_watchdog_init (void) +{ + puts (" Watchdog enabled\n"); + WATCHDOG_RESET (); + return (0); +} +# define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init, + +static int init_func_watchdog_reset (void) +{ + WATCHDOG_RESET (); + return (0); +} +# define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset, +#else +# define INIT_FUNC_WATCHDOG_INIT /* undef */ +# define INIT_FUNC_WATCHDOG_RESET /* undef */ +#endif /* CONFIG_WATCHDOG */ + +/************************************************************************ + * Initialization sequence * + ************************************************************************ + */ + +init_fnc_t *init_sequence[] = { +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + probecpu, +#endif +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, +#endif +#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) + get_clocks, /* get CPU and bus clocks (etc.) */ +#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \ + && !defined(CONFIG_TQM885D) + adjust_sdram_tbs_8xx, +#endif + init_timebase, +#endif +#ifdef CONFIG_SYS_ALLOC_DPRAM +#if !defined(CONFIG_CPM2) + dpram_init, +#endif +#endif +#if defined(CONFIG_BOARD_POSTCLK_INIT) + board_postclk_init, +#endif + env_init, +#if defined(CONFIG_8xx_CPUCLK_DEFAULT) + get_clocks_866, /* get CPU and bus clocks according to the environment variable */ + sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */ + init_timebase, +#endif + init_baudrate, + serial_init, + console_init_f, + display_options, +#if defined(CONFIG_8260) + prt_8260_rsr, + prt_8260_clks, +#endif /* CONFIG_8260 */ +#if defined(CONFIG_MPC83xx) + prt_83xx_rsr, +#endif + checkcpu, +#if defined(CONFIG_MPC5xxx) + prt_mpc5xxx_clks, +#endif /* CONFIG_MPC5xxx */ +#if defined(CONFIG_MPC8220) + prt_mpc8220_clks, +#endif + checkboard, + INIT_FUNC_WATCHDOG_INIT +#if defined(CONFIG_MISC_INIT_F) + misc_init_f, +#endif + INIT_FUNC_WATCHDOG_RESET +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + init_func_i2c, +#endif +#if defined(CONFIG_HARD_SPI) + init_func_spi, +#endif +#ifdef CONFIG_POST + post_init_f, +#endif + INIT_FUNC_WATCHDOG_RESET + init_func_ram, +#if defined(CONFIG_SYS_DRAM_TEST) + testdram, +#endif /* CONFIG_SYS_DRAM_TEST */ + INIT_FUNC_WATCHDOG_RESET + + NULL, /* Terminate this list */ +}; + +ulong get_effective_memsize(void) +{ +#ifndef CONFIG_VERY_BIG_RAM + return gd->ram_size; +#else + /* limit stack to what we can reasonable map */ + return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? + CONFIG_MAX_MEM_MAPPED : gd->ram_size); +#endif +} + +/************************************************************************ + * + * This is the first part of the initialization sequence that is + * implemented in C, but still running from ROM. + * + * The main purpose is to provide a (serial) console interface as + * soon as possible (so we can see any error messages), and to + * initialize the RAM so that we can relocate the monitor code to + * RAM. + * + * Be aware of the restrictions: global data is read-only, BSS is not + * initialized, and stack space is limited to a few kB. + * + ************************************************************************ + */ + +#ifdef CONFIG_LOGBUFFER +unsigned long logbuffer_base(void) +{ + return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN; +} +#endif + +void board_init_f (ulong bootflag) +{ + bd_t *bd; + ulong len, addr, addr_sp; + ulong *s; + gd_t *id; + init_fnc_t **init_fnc_ptr; +#ifdef CONFIG_PRAM + int i; + ulong reg; + uchar tmp[64]; /* long enough for environment variables */ +#endif + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + +#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ + !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \ + !defined(CONFIG_MPC86xx) + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); +#endif + + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { + if ((*init_fnc_ptr) () != 0) { + hang (); + } + } + + /* + * Now that we have DRAM mapped and working, we can + * relocate the code and continue running from DRAM. + * + * Reserve memory at end of RAM for (top down in that order): + * - area that won't get touched by U-Boot and Linux (optional) + * - kernel log buffer + * - protected RAM + * - LCD framebuffer + * - monitor code + * - board info struct + */ + len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE; + + /* + * Subtract specified amount of memory to hide so that it won't + * get "touched" at all by U-Boot. By fixing up gd->ram_size + * the Linux kernel should now get passed the now "corrected" + * memory size and won't touch it either. This should work + * for arch/ppc and arch/powerpc. Only Linux board ports in + * arch/powerpc with bootwrapper support, that recalculate the + * memory size from the SDRAM controller setup will have to + * get fixed. + */ + gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; + + addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize(); + +#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) + /* + * We need to make sure the location we intend to put secondary core + * boot code is reserved and not used by any part of u-boot + */ + if (addr > determine_mp_bootpg()) { + addr = determine_mp_bootpg(); + debug ("Reserving MP boot page to %08lx\n", addr); + } +#endif + +#ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR + /* reserve kernel log buffer */ + addr -= (LOGBUFF_RESERVE); + debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr); +#endif +#endif + +#ifdef CONFIG_PRAM + /* + * reserve protected RAM + */ + i = getenv_r ("pram", (char *)tmp, sizeof (tmp)); + reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM; + addr -= (reg << 10); /* size is in kB */ + debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); +#endif /* CONFIG_PRAM */ + + /* round down to next 4 kB limit */ + addr &= ~(4096 - 1); + debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); + +#ifdef CONFIG_LCD + /* reserve memory for LCD display (always full pages) */ + addr = lcd_setmem (addr); + gd->fb_base = addr; +#endif /* CONFIG_LCD */ + +#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx) + /* reserve memory for video display (always full pages) */ + addr = video_setmem (addr); + gd->fb_base = addr; +#endif /* CONFIG_VIDEO */ + + /* + * reserve memory for U-Boot code, data & bss + * round down to next 4 kB limit + */ + addr -= len; + addr &= ~(4096 - 1); +#ifdef CONFIG_E500 + /* round down to next 64 kB limit so that IVPR stays aligned */ + addr &= ~(65536 - 1); +#endif + + debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); + + /* + * reserve memory for malloc() arena + */ + addr_sp = addr - TOTAL_MALLOC_LEN; + debug ("Reserving %dk for malloc() at: %08lx\n", + TOTAL_MALLOC_LEN >> 10, addr_sp); + + /* + * (permanently) allocate a Board Info struct + * and a permanent copy of the "global" data + */ + addr_sp -= sizeof (bd_t); + bd = (bd_t *) addr_sp; + gd->bd = bd; + debug ("Reserving %zu Bytes for Board Info at: %08lx\n", + sizeof (bd_t), addr_sp); + addr_sp -= sizeof (gd_t); + id = (gd_t *) addr_sp; + debug ("Reserving %zu Bytes for Global Data at: %08lx\n", + sizeof (gd_t), addr_sp); + + /* + * Finally, we set up a new (bigger) stack. + * + * Leave some safety gap for SP, force alignment on 16 byte boundary + * Clear initial stack frame + */ + addr_sp -= 16; + addr_sp &= ~0xF; + s = (ulong *)addr_sp; + *s-- = 0; + *s-- = 0; + addr_sp = (ulong)s; + debug ("Stack Pointer at: %08lx\n", addr_sp); + + /* + * Save local variables to board info struct + */ + + bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */ + bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ + +#ifdef CONFIG_IP860 + bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */ + bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */ +#elif defined CONFIG_MPC8220 + bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */ + bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */ +#else + bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */ + bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */ +#endif + +#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \ + defined(CONFIG_E500) || defined(CONFIG_MPC86xx) + bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ +#endif +#if defined(CONFIG_MPC5xxx) + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ +#endif +#if defined(CONFIG_MPC83xx) + bd->bi_immrbar = CONFIG_SYS_IMMR; +#endif +#if defined(CONFIG_MPC8220) + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ + bd->bi_inpfreq = gd->inp_clk; + bd->bi_pcifreq = gd->pci_clk; + bd->bi_vcofreq = gd->vco_clk; + bd->bi_pevfreq = gd->pev_clk; + bd->bi_flbfreq = gd->flb_clk; + + /* store bootparam to sram (backward compatible), here? */ + { + u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE; + *sram++ = gd->ram_size; + *sram++ = gd->bus_clk; + *sram++ = gd->inp_clk; + *sram++ = gd->cpu_clk; + *sram++ = gd->vco_clk; + *sram++ = gd->flb_clk; + *sram++ = 0xb8c3ba11; /* boot signature */ + } +#endif + + bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ + + WATCHDOG_RESET (); + bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ + bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ +#if defined(CONFIG_CPM2) + bd->bi_cpmfreq = gd->cpm_clk; + bd->bi_brgfreq = gd->brg_clk; + bd->bi_sccfreq = gd->scc_clk; + bd->bi_vco = gd->vco_out; +#endif /* CONFIG_CPM2 */ +#if defined(CONFIG_MPC512X) + bd->bi_ipsfreq = gd->ips_clk; +#endif /* CONFIG_MPC512X */ +#if defined(CONFIG_MPC5xxx) + bd->bi_ipbfreq = gd->ipb_clk; + bd->bi_pcifreq = gd->pci_clk; +#endif /* CONFIG_MPC5xxx */ + bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ + +#ifdef CONFIG_SYS_EXTBDINFO + strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version)); + strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version)); + + bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */ + bd->bi_plb_busfreq = gd->bus_clk; +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + bd->bi_pci_busfreq = get_PCI_freq (); + bd->bi_opbfreq = get_OPB_freq (); +#elif defined(CONFIG_XILINX_405) + bd->bi_pci_busfreq = get_PCI_freq (); +#endif +#endif + + debug ("New Stack Pointer is: %08lx\n", addr_sp); + + WATCHDOG_RESET (); + +#ifdef CONFIG_POST + post_bootmode_init(); + post_run (NULL, POST_ROM | post_bootmode_get(0)); +#endif + + WATCHDOG_RESET(); + + gd->relocaddr = addr; /* Record relocation address, useful for debug */ + + memcpy (id, (void *)gd, sizeof (gd_t)); + + relocate_code (addr_sp, id, addr); + + /* NOTREACHED - relocate_code() does not return */ +} + +/************************************************************************ + * + * This is the next part if the initialization sequence: we are now + * running from RAM and have a "normal" C environment, i. e. global + * data can be written, BSS has been cleared, the stack size in not + * that critical any more, etc. + * + ************************************************************************ + */ +void board_init_r (gd_t *id, ulong dest_addr) +{ + char *s; + bd_t *bd; + ulong malloc_start; + +#ifndef CONFIG_SYS_NO_FLASH + ulong flash_size; +#endif + + gd = id; /* initialize RAM version of global data */ + bd = gd->bd; + + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + + /* The Malloc area is immediately below the monitor copy in DRAM */ + malloc_start = dest_addr - TOTAL_MALLOC_LEN; + +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + /* + * The gd->cpu pointer is set to an address in flash before relocation. + * We need to update it to point to the same CPU entry in RAM. + */ + gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE; +#endif + +#ifdef CONFIG_SERIAL_MULTI + serial_initialize(); +#endif + + debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); + + WATCHDOG_RESET (); + + /* + * Setup trap handlers + */ + trap_init (dest_addr); + +#ifdef CONFIG_ADDR_MAP + init_addr_map(); +#endif + +#if defined(CONFIG_BOARD_EARLY_INIT_R) + board_early_init_r (); +#endif + + monitor_flash_len = (ulong)&__init_end - dest_addr; + + WATCHDOG_RESET (); + +#ifdef CONFIG_LOGBUFFER + logbuff_init_ptrs (); +#endif +#ifdef CONFIG_POST + post_output_backlog (); +#endif + + WATCHDOG_RESET(); + +#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx) + icache_enable (); /* it's time to enable the instruction cache */ +#endif + +#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) + unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */ +#endif + +#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45) + /* + * Do PCI configuration on BAB7xx and CPC45 _before_ the flash + * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus + * bridge there. + */ + pci_init (); +#endif +#if defined(CONFIG_BAB7xx) + /* + * Initialise the ISA bridge + */ + initialise_w83c553f (); +#endif + + asm ("sync ; isync"); + + mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN); + +#if !defined(CONFIG_SYS_NO_FLASH) + puts ("FLASH: "); + + if ((flash_size = flash_init ()) > 0) { +# ifdef CONFIG_SYS_FLASH_CHECKSUM + print_size (flash_size, ""); + /* + * Compute and print flash CRC if flashchecksum is set to 'y' + * + * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX + */ + s = getenv ("flashchecksum"); + if (s && (*s == 'y')) { + printf (" CRC: %08X", + crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size) + ); + } + putc ('\n'); +# else /* !CONFIG_SYS_FLASH_CHECKSUM */ + print_size (flash_size, "\n"); +# endif /* CONFIG_SYS_FLASH_CHECKSUM */ + } else { + puts (failed); + hang (); + } + + bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */ + bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */ + +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) + /* Make a update of the Memctrl. */ + update_flash_size (flash_size); +#endif + + +# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU) + /* flash mapped at end of memory map */ + bd->bi_flashoffset = TEXT_BASE + flash_size; +# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE + bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */ +# else + bd->bi_flashoffset = 0; +# endif +#else /* CONFIG_SYS_NO_FLASH */ + + bd->bi_flashsize = 0; + bd->bi_flashstart = 0; + bd->bi_flashoffset = 0; +#endif /* !CONFIG_SYS_NO_FLASH */ + + WATCHDOG_RESET (); + + /* initialize higher level parts of CPU like time base and timers */ + cpu_init_r (); + + WATCHDOG_RESET (); + +#ifdef CONFIG_SPI +# if !defined(CONFIG_ENV_IS_IN_EEPROM) + spi_init_f (); +# endif + spi_init_r (); +#endif + +#if defined(CONFIG_CMD_NAND) + WATCHDOG_RESET (); + puts ("NAND: "); + nand_init(); /* go init the NAND */ +#endif + + /* relocate environment function pointers etc. */ + env_relocate (); + + /* + * Fill in missing fields of bd_info. + * We do this here, where we have "normal" access to the + * environment; we used to do this still running from ROM, + * where had to use getenv_r(), which can be pretty slow when + * the environment is in EEPROM. + */ + +#if defined(CONFIG_SYS_EXTBDINFO) +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +#if defined(CONFIG_I2CFAST) + /* + * set bi_iic_fast for linux taking environment variable + * "i2cfast" into account + */ + { + char *s = getenv ("i2cfast"); + if (s && ((*s == 'y') || (*s == 'Y'))) { + bd->bi_iic_fast[0] = 1; + bd->bi_iic_fast[1] = 1; + } else { + bd->bi_iic_fast[0] = 0; + bd->bi_iic_fast[1] = 0; + } + } +#else + bd->bi_iic_fast[0] = 0; + bd->bi_iic_fast[1] = 0; +#endif /* CONFIG_I2CFAST */ +#endif /* CONFIG_405GP, CONFIG_405EP */ +#endif /* CONFIG_SYS_EXTBDINFO */ + +#if defined(CONFIG_SC3) + sc3_read_eeprom(); +#endif + +#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET) + mac_read_from_eeprom(); +#endif + +#ifdef CONFIG_HERMES + if ((gd->board_type >> 16) == 2) + bd->bi_ethspeed = gd->board_type & 0xFFFF; + else + bd->bi_ethspeed = 0xFFFF; +#endif + +#ifdef CONFIG_CMD_NET + /* kept around for legacy kernels only ... ignore the next section */ + eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr); +#ifdef CONFIG_HAS_ETH1 + eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr); +#endif +#ifdef CONFIG_HAS_ETH2 + eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr); +#endif +#ifdef CONFIG_HAS_ETH3 + eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr); +#endif +#ifdef CONFIG_HAS_ETH4 + eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr); +#endif +#ifdef CONFIG_HAS_ETH5 + eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr); +#endif +#endif /* CONFIG_CMD_NET */ + + /* IP Address */ + bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); + + WATCHDOG_RESET (); + +#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45) + /* + * Do pci configuration + */ + pci_init (); +#endif + +/** leave this here (after malloc(), environment and PCI are working) **/ + /* Initialize stdio devices */ + stdio_init (); + + /* Initialize the jump table for applications */ + jumptable_init (); + +#if defined(CONFIG_API) + /* Initialize API */ + api_init (); +#endif + + /* Initialize the console (after the relocation and devices init) */ + console_init_r (); + +#if defined(CONFIG_MISC_INIT_R) + /* miscellaneous platform dependent initialisations */ + misc_init_r (); +#endif + +#ifdef CONFIG_HERMES + if (bd->bi_ethspeed != 0xFFFF) + hermes_start_lxt980 ((int) bd->bi_ethspeed); +#endif + +#if defined(CONFIG_CMD_KGDB) + WATCHDOG_RESET (); + puts ("KGDB: "); + kgdb_init (); +#endif + + debug ("U-Boot relocated to %08lx\n", dest_addr); + + /* + * Enable Interrupts + */ + interrupt_init (); + + /* Must happen after interrupts are initialized since + * an irq handler gets installed + */ +#ifdef CONFIG_SERIAL_SOFTWARE_FIFO + serial_buffered_init(); +#endif + +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); +#endif + + udelay (20); + + set_timer (0); + + /* Initialize from environment */ + if ((s = getenv ("loadaddr")) != NULL) { + load_addr = simple_strtoul (s, NULL, 16); + } +#if defined(CONFIG_CMD_NET) + if ((s = getenv ("bootfile")) != NULL) { + copy_filename (BootFile, s, sizeof (BootFile)); + } +#endif + + WATCHDOG_RESET (); + +#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */ + dtt_init (); +#endif +#if defined(CONFIG_CMD_SCSI) + WATCHDOG_RESET (); + puts ("SCSI: "); + scsi_init (); +#endif + +#ifdef CONFIG_GENERIC_MMC + WATCHDOG_RESET (); + puts ("MMC: "); + mmc_initialize (bd); +#endif + +#if defined(CONFIG_CMD_DOC) + WATCHDOG_RESET (); + puts ("DOC: "); + doc_init (); +#endif + +#ifdef CONFIG_BITBANGMII + bb_miiphy_init(); +#endif +#if defined(CONFIG_CMD_NET) +#if defined(CONFIG_NET_MULTI) + WATCHDOG_RESET (); + puts ("Net: "); +#endif + eth_initialize (bd); +#endif + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) + WATCHDOG_RESET (); + debug ("Reset Ethernet PHY\n"); + reset_phy (); +#endif + +#ifdef CONFIG_POST + post_run (NULL, POST_RAM | post_bootmode_get(0)); +#endif + +#if defined(CONFIG_CMD_PCMCIA) \ + && !defined(CONFIG_CMD_IDE) + WATCHDOG_RESET (); + puts ("PCMCIA:"); + pcmcia_init (); +#endif + +#if defined(CONFIG_CMD_IDE) + WATCHDOG_RESET (); +# ifdef CONFIG_IDE_8xx_PCCARD + puts ("PCMCIA:"); +# else + puts ("IDE: "); +#endif +#if defined(CONFIG_START_IDE) + if (board_start_ide()) + ide_init (); +#else + ide_init (); +#endif +#endif + +#ifdef CONFIG_LAST_STAGE_INIT + WATCHDOG_RESET (); + /* + * Some parts can be only initialized if all others (like + * Interrupts) are up and running (i.e. the PC-style ISA + * keyboard). + */ + last_stage_init (); +#endif + +#if defined(CONFIG_CMD_BEDBUG) + WATCHDOG_RESET (); + bedbug_init (); +#endif + +#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) + /* + * Export available size of memory for Linux, + * taking into account the protected RAM at top of memory + */ + { + ulong pram; + uchar memsz[32]; +#ifdef CONFIG_PRAM + char *s; + + if ((s = getenv ("pram")) != NULL) { + pram = simple_strtoul (s, NULL, 10); + } else { + pram = CONFIG_PRAM; + } +#else + pram=0; +#endif +#ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR + /* Also take the logbuffer into account (pram is in kB) */ + pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024; +#endif +#endif + sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram); + setenv ("mem", (char *)memsz); + } +#endif + +#ifdef CONFIG_PS2KBD + puts ("PS/2: "); + kbd_init(); +#endif + +#ifdef CONFIG_MODEM_SUPPORT + { + extern int do_mdm_init; + do_mdm_init = gd->do_mdm_init; + } +#endif + + /* Initialization complete - start the monitor */ + + /* main_loop() can return to retry autoboot, if so just run it again. */ + for (;;) { + WATCHDOG_RESET (); + main_loop (); + } + + /* NOTREACHED - no way out of command loop except booting */ +} + +void hang (void) +{ + puts ("### ERROR ### Please RESET the board ###\n"); + show_boot_progress(-30); + for (;;); +} + + +#if 0 /* We could use plain global data, but the resulting code is bigger */ +/* + * Pointer to initial global data area + * + * Here we initialize it. + */ +#undef XTRN_DECLARE_GLOBAL_DATA_PTR +#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ +DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); +#endif /* 0 */ + +/************************************************************************/ |