diff options
Diffstat (limited to 'arch/powerpc/include/asm/immap_85xx.h')
| -rw-r--r-- | arch/powerpc/include/asm/immap_85xx.h | 97 |
1 files changed, 48 insertions, 49 deletions
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 81b3322fe..3a10d778f 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1544,6 +1544,18 @@ struct rio_pw { }; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN +struct rio_liodn { + u32 plbr; + u8 res0[28]; + u32 plaor; + u8 res1[12]; + u32 pludr; + u32 plldr; + u8 res2[456]; +}; +#endif + /* RapidIO Registers */ struct ccsr_rio { struct rio_arch arch; @@ -1566,6 +1578,10 @@ struct ccsr_rio { u8 res7[100]; struct rio_pw pw; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN + u8 res5[8192]; + struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +#endif }; #endif @@ -2131,6 +2147,11 @@ typedef struct ccsr_gur { #ifdef CONFIG_MPC8536 #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 +#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \ + & MPC85xx_PORDEVSR2_DDR_SPD_0) \ + >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT)) #else #if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 @@ -2178,6 +2199,9 @@ typedef struct ccsr_gur { #elif defined(CONFIG_BSC9132) #define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2193,6 +2217,10 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 u32 pordbgmsr; /* POR debug mode status */ u32 pordevsr2; /* POR I/O device status 2 */ +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008 +#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3 +#endif /* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 u8 res1[8]; @@ -2339,6 +2367,11 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 #define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 #endif +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PMUXCR_SPI_MASK 0x00000300 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2526,7 +2559,9 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SWRST 0x10000000 -#define SRDS_RSTCTL_SDPD 0x00000020 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 u32 pllcr0; /* PLL Control Register 0 */ #define SRDS_PLLCR0_POFF 0x80000000 #define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 @@ -2811,54 +2846,6 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; -#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -struct ccsr_usb_port_ctrl { - u32 ctrl; - u32 drvvbuscfg; - u32 pwrfltcfg; - u32 sts; - u8 res_14[0xc]; - u32 bistcfg; - u32 biststs; - u32 abistcfg; - u32 abiststs; - u8 res_30[0x10]; - u32 xcvrprg; - u32 anaprg; - u32 anadrv; - u32 anasts; -}; - -typedef struct ccsr_usb_phy { - u32 id; - struct ccsr_usb_port_ctrl port1; - u8 res_50[0xc]; - u32 tvr; - u32 pllprg[4]; - u8 res_70[0x4]; - u32 anaccfg; - u32 dbg; - u8 res_7c[0x4]; - struct ccsr_usb_port_ctrl port2; - u8 res_dc[0x334]; -} ccsr_usb_phy_t; - -#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) -#else -typedef struct ccsr_usb_phy { - u8 res0[0x18]; - u32 usb_enable_override; - u8 res[0xe4]; -} ccsr_usb_phy_t; -#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 -#endif - #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { u8 res0[0x543]; @@ -3008,12 +2995,18 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#elif defined(CONFIG_TSECV2_1) +#define CONFIG_SYS_TSEC1_OFFSET 0x10000 #else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#if defined(CONFIG_PPC_C29X) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000 +#else #define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 +#endif #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 @@ -3031,6 +3024,12 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 #define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 +#if defined(CONFIG_BSC9132) +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000 +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \ + (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET) +#endif + #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) #define CONFIG_SYS_FSL_QMAN_ADDR \ |