diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc83xx/cpu_init.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc83xx/cpu_init.c | 548 |
1 files changed, 548 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c new file mode 100644 index 000000000..75b45222b --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -0,0 +1,548 @@ +/* + * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc83xx.h> +#include <ioports.h> +#include <asm/io.h> +#ifdef CONFIG_USB_EHCI_FSL +#include <usb/ehci-fsl.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_QE +extern qe_iop_conf_t qe_iop_conf_tab[]; +extern void qe_config_iopin(u8 port, u8 pin, int dir, + int open_drain, int assign); +extern void qe_init(uint qe_base); +extern void qe_reset(void); + +static void config_qe_ioports(void) +{ + u8 port, pin; + int dir, open_drain, assign; + int i; + + for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) { + port = qe_iop_conf_tab[i].port; + pin = qe_iop_conf_tab[i].pin; + dir = qe_iop_conf_tab[i].dir; + open_drain = qe_iop_conf_tab[i].open_drain; + assign = qe_iop_conf_tab[i].assign; + qe_config_iopin(port, pin, dir, open_drain, assign); + } +} +#endif + +/* + * Breathe some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f (volatile immap_t * im) +{ + __be32 acr_mask = +#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ + (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ + (ACR_RPTCNT << ACR_RPTCNT_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ + (ACR_APARK << ACR_APARK_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ + (ACR_PARKM << ACR_PARKM_SHIFT) | +#endif + 0; + __be32 acr_val = +#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ + (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ + (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ + (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ + (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) | +#endif + 0; + __be32 spcr_mask = +#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */ + (SPCR_OPT << SPCR_OPT_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ + (SPCR_TSECEP << SPCR_TSECEP_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ + (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ + (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | +#endif + 0; + __be32 spcr_val = +#ifdef CONFIG_SYS_SPCR_OPT + (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ + (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ + (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ + (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | +#endif + 0; + __be32 sccr_mask = +#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ + (SCCR_ENCCM << SCCR_ENCCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ + (SCCR_PCICM << SCCR_PCICM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ + (SCCR_TSECCM << SCCR_TSECCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ + (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ + (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ + (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ + (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ + (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ + (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ + (SCCR_SATACM << SCCR_SATACM_SHIFT) | +#endif + 0; + __be32 sccr_val = +#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ + (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ + (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ + (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ + (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ + (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ + (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ + (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ + (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ + (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ + (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | +#endif + 0; + __be32 lcrr_mask = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ + LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + LCRR_CLKDIV | +#endif + 0; + __be32 lcrr_val = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + CONFIG_SYS_LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC + CONFIG_SYS_LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + CONFIG_SYS_LCRR_CLKDIV | +#endif + 0; + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + + /* system performance tweaking */ + clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val); + + clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val); + + clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val); + + /* RSR - Reset Status Register - clear all status (4.6.1.3) */ + gd->reset_status = __raw_readl(&im->reset.rsr); + __raw_writel(~(RSR_RES), &im->reset.rsr); + + /* AER - Arbiter Event Register - store status */ + gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr); + gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr); + + /* + * RMR - Reset Mode Register + * contains checkstop reset enable (4.6.1.4) + */ + __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr); + + /* LCRR - Clock Ratio Register (10.3.1.16) + * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description + */ + clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->lbus.lcrr); + isync(); + + /* Enable Time Base & Decrementer ( so we will have udelay() )*/ + setbits_be32(&im->sysconf.spcr, SPCR_TBEN); + + /* System General Purpose Register */ +#ifdef CONFIG_SYS_SICRH +#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313) + /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ + __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH, + &im->sysconf.sicrh); +#else + __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh); +#endif +#endif +#ifdef CONFIG_SYS_SICRL + __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); +#endif +#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ + __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); +#endif +#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */ + __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir); +#endif + +#ifdef CONFIG_QE + /* Config QE ioports */ + config_qe_ioports(); +#endif + + /* + * Memory Controller: + */ + + /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary + * addresses - these have to be modified later when FLASH size + * has been determined + */ + +#if defined(CONFIG_SYS_BR0_PRELIM) \ + && defined(CONFIG_SYS_OR0_PRELIM) \ + && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \ + && defined(CONFIG_SYS_LBLAWAR0_PRELIM) + im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM; + im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM; + im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; + im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; +#else +#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined +#endif + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM; + im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) + im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; + im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; +#endif +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM; + im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) + im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; + im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; +#endif +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM; + im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) + im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; + im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; +#endif +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM; + im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) + im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; + im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; +#endif +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM; + im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) + im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; + im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; +#endif +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM; + im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) + im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; + im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; +#endif +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM; + im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM; +#endif +#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) + im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; + im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; +#endif +#ifdef CONFIG_SYS_GPIO1_PRELIM + im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT; + im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR; +#endif +#ifdef CONFIG_SYS_GPIO2_PRELIM + im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT; + im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; +#endif +#ifdef CONFIG_USB_EHCI_FSL +#ifndef CONFIG_MPC834x + uint32_t temp; + struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; + + /* Configure interface. */ + setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); + + /* Wait for clock to stabilize */ + do { + temp = __raw_readl(&ehci->control); + udelay(1000); + } while (!(temp & PHY_CLK_VALID)); +#endif +#endif +} + +int cpu_init_r (void) +{ +#ifdef CONFIG_QE + uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */ + + qe_init(qe_base); + qe_reset(); +#endif + return 0; +} + +/* + * Print out the bus arbiter event + */ +#if defined(CONFIG_DISPLAY_AER_FULL) +static int print_83xx_arb_event(int force) +{ + static char* event[] = { + "Address Time Out", + "Data Time Out", + "Address Only Transfer Type", + "External Control Word Transfer Type", + "Reserved Transfer Type", + "Transfer Error", + "reserved", + "reserved" + }; + static char* master[] = { + "e300 Core Data Transaction", + "reserved", + "e300 Core Instruction Fetch", + "reserved", + "TSEC1", + "TSEC2", + "USB MPH", + "USB DR", + "Encryption Core", + "I2C Boot Sequencer", + "JTAG", + "reserved", + "eSDHC", + "PCI1", + "PCI2", + "DMA", + "QUICC Engine 00", + "QUICC Engine 01", + "QUICC Engine 10", + "QUICC Engine 11", + "reserved", + "reserved", + "reserved", + "reserved", + "SATA1", + "SATA2", + "SATA3", + "SATA4", + "reserved", + "PCI Express 1", + "PCI Express 2", + "TDM-DMAC" + }; + static char *transfer[] = { + "Address-only, Clean Block", + "Address-only, lwarx reservation set", + "Single-beat or Burst write", + "reserved", + "Address-only, Flush Block", + "reserved", + "Burst write", + "reserved", + "Address-only, sync", + "Address-only, tlbsync", + "Single-beat or Burst read", + "Single-beat or Burst read", + "Address-only, Kill Block", + "Address-only, icbi", + "Burst read", + "reserved", + "Address-only, eieio", + "reserved", + "Single-beat write", + "reserved", + "ecowx - Illegal single-beat write", + "reserved", + "reserved", + "reserved", + "Address-only, TLB Invalidate", + "reserved", + "Single-beat or Burst read", + "reserved", + "eciwx - Illegal single-beat read", + "reserved", + "Burst read", + "reserved" + }; + + int etype = (gd->arbiter_event_attributes & AEATR_EVENT) + >> AEATR_EVENT_SHIFT; + int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID) + >> AEATR_MSTR_ID_SHIFT; + int tbst = (gd->arbiter_event_attributes & AEATR_TBST) + >> AEATR_TBST_SHIFT; + int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE) + >> AEATR_TSIZE_SHIFT; + int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE) + >> AEATR_TTYPE_SHIFT; + + if (!force && !gd->arbiter_event_address) + return 0; + + puts("Arbiter Event Status:\n"); + printf(" Event Address: 0x%08lX\n", gd->arbiter_event_address); + printf(" Event Type: 0x%1x = %s\n", etype, event[etype]); + printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]); + printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize, + tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize); + printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]); + + return gd->arbiter_event_address; +} + +#elif defined(CONFIG_DISPLAY_AER_BRIEF) + +static int print_83xx_arb_event(int force) +{ + if (!force && !gd->arbiter_event_address) + return 0; + + printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n", + gd->arbiter_event_attributes, gd->arbiter_event_address); + + return gd->arbiter_event_address; +} +#endif /* CONFIG_DISPLAY_AER_xxxx */ + +/* + * Figure out the cause of the reset + */ +int prt_83xx_rsr(void) +{ + static struct { + ulong mask; + char *desc; + } bits[] = { + { + RSR_SWSR, "Software Soft"}, { + RSR_SWHR, "Software Hard"}, { + RSR_JSRS, "JTAG Soft"}, { + RSR_CSHR, "Check Stop"}, { + RSR_SWRS, "Software Watchdog"}, { + RSR_BMRS, "Bus Monitor"}, { + RSR_SRS, "External/Internal Soft"}, { + RSR_HRS, "External/Internal Hard"} + }; + static int n = sizeof bits / sizeof bits[0]; + ulong rsr = gd->reset_status; + int i; + char *sep; + + puts("Reset Status:"); + + sep = " "; + for (i = 0; i < n; i++) + if (rsr & bits[i].mask) { + printf("%s%s", sep, bits[i].desc); + sep = ", "; + } + puts("\n"); + +#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF) + print_83xx_arb_event(rsr & RSR_BMRS); +#endif + puts("\n"); + + return 0; +} |