diff options
Diffstat (limited to 'arch/mips/cpu/mips32/start.S')
| -rw-r--r-- | arch/mips/cpu/mips32/start.S | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S index 5d7467d02..9c1b2f76d 100644 --- a/arch/mips/cpu/mips32/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -27,6 +27,10 @@ #include <asm/regdef.h> #include <asm/mipsregs.h> +#ifndef CONFIG_SYS_MIPS_CACHE_MODE +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT +#endif + /* * For the moment disable interrupts, mark the kernel mode and * set ST0_KX so that the CPU does not spit fire when using @@ -64,9 +68,16 @@ _start: RVECENT(reset,0) # U-boot entry point RVECENT(reset,1) # software reboot -#ifdef CONFIG_INCA_IP - .word INFINEON_EBU_BOOTCFG # EBU init code, fetched during - .word 0x00000000 # booting phase of the flash +#ifdef CONFIG_SYS_XWAY_EBU_BOOTCFG + /* + * Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to + * access external NOR flashes. If the board boots from NOR flash the + * internal BootROM does a blind read at address 0xB0000010 to read the + * initial configuration for that EBU in order to access the flash + * device with correct parameters. This config option is board-specific. + */ + .word CONFIG_SYS_XWAY_EBU_BOOTCFG + .word 0x00000000 #else RVECENT(romReserved,2) #endif @@ -242,7 +253,7 @@ reset: nop /* ... and enable them */ - li t0, CONF_CM_CACHABLE_NONCOHERENT + li t0, CONFIG_SYS_MIPS_CACHE_MODE mtc0 t0, CP0_CONFIG #endif |