diff options
Diffstat (limited to 'arch/i386/lib/bios_setup.c')
| -rw-r--r-- | arch/i386/lib/bios_setup.c | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/arch/i386/lib/bios_setup.c b/arch/i386/lib/bios_setup.c new file mode 100644 index 000000000..6491e522e --- /dev/null +++ b/arch/i386/lib/bios_setup.c @@ -0,0 +1,242 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + * Partly based on msbios.c from rolo 1.6: + *---------------------------------------------------------------------- + * (C) Copyright 2000 + * Sysgo Real-Time Solutions GmbH + * Klein-Winternheim, Germany + *---------------------------------------------------------------------- + */ + +#include <common.h> +#include <pci.h> +#include <asm/realmode.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define NUMVECTS 256 + +#define BIOS_DATA ((char*)0x400) +#define BIOS_DATA_SIZE 256 +#define BIOS_BASE ((char*)0xf0000) +#define BIOS_CS 0xf000 + +extern ulong _i386boot_bios; +extern ulong _i386boot_bios_size; + +/* these are defined in a 16bit segment and needs + * to be accessed with the RELOC_16_xxxx() macros below + */ +extern u16 ram_in_64kb_chunks; +extern u16 bios_equipment; +extern u8 pci_last_bus; + +extern void *rm_int00; +extern void *rm_int01; +extern void *rm_int02; +extern void *rm_int03; +extern void *rm_int04; +extern void *rm_int05; +extern void *rm_int06; +extern void *rm_int07; +extern void *rm_int08; +extern void *rm_int09; +extern void *rm_int0a; +extern void *rm_int0b; +extern void *rm_int0c; +extern void *rm_int0d; +extern void *rm_int0e; +extern void *rm_int0f; +extern void *rm_int10; +extern void *rm_int11; +extern void *rm_int12; +extern void *rm_int13; +extern void *rm_int14; +extern void *rm_int15; +extern void *rm_int16; +extern void *rm_int17; +extern void *rm_int18; +extern void *rm_int19; +extern void *rm_int1a; +extern void *rm_int1b; +extern void *rm_int1c; +extern void *rm_int1d; +extern void *rm_int1e; +extern void *rm_int1f; +extern void *rm_def_int; + +extern void *realmode_reset; +extern void *realmode_pci_bios_call_entry; + +static int set_jmp_vector(int entry_point, void *target) +{ + if (entry_point & ~0xffff) { + return -1; + } + + if (((u32)target-0xf0000) & ~0xffff) { + return -1; + } + printf("set_jmp_vector: 0xf000:%04x -> %p\n", + entry_point, target); + + /* jmp opcode */ + writeb(0xea, 0xf0000 + entry_point); + + /* offset */ + writew(((u32)target-0xf0000), 0xf0000 + entry_point + 1); + + /* segment */ + writew(0xf000, 0xf0000 + entry_point + 3); + + return 0; +} + + +/* + ************************************************************ + * Install an interrupt vector + ************************************************************ + */ + +static void setvector(int vector, u16 segment, void *handler) +{ + u16 *ptr = (u16*)(vector*4); + ptr[0] = ((u32)handler - (segment << 4))&0xffff; + ptr[1] = segment; + +#if 0 + printf("setvector: int%02x -> %04x:%04x\n", + vector, ptr[1], ptr[0]); +#endif +} + +#define RELOC_16_LONG(seg, off) *(u32*)(seg << 4 | (u32)&off) +#define RELOC_16_WORD(seg, off) *(u16*)(seg << 4 | (u32)&off) +#define RELOC_16_BYTE(seg, off) *(u8*)(seg << 4 | (u32)&off) + +int bios_setup(void) +{ + ulong i386boot_bios = (ulong)&_i386boot_bios; + ulong i386boot_bios_size = (ulong)&_i386boot_bios_size; + + static int done=0; + int vector; +#ifdef CONFIG_PCI + struct pci_controller *pri_hose; +#endif + if (done) { + return 0; + } + done = 1; + + if (i386boot_bios_size > 65536) { + printf("BIOS too large (%ld bytes, max is 65536)\n", + i386boot_bios_size); + return -1; + } + + memcpy(BIOS_BASE, (void*)i386boot_bios, i386boot_bios_size); + + /* clear bda */ + memset(BIOS_DATA, 0, BIOS_DATA_SIZE); + + /* enter some values to the bda */ + writew(0x3f8, BIOS_DATA); /* com1 addr */ + writew(0x2f8, BIOS_DATA+2); /* com2 addr */ + writew(0x3e8, BIOS_DATA+4); /* com3 addr */ + writew(0x2e8, BIOS_DATA+6); /* com4 addr */ + writew(0x278, BIOS_DATA+8); /* lpt1 addr */ + /* + * The kernel wants to read the base memory size + * from 40:13. Put a zero there to avoid an error message + */ + writew(0, BIOS_DATA+0x13); /* base memory size */ + + + /* setup realmode interrupt vectors */ + for (vector = 0; vector < NUMVECTS; vector++) { + setvector(vector, BIOS_CS, &rm_def_int); + } + + setvector(0x00, BIOS_CS, &rm_int00); + setvector(0x01, BIOS_CS, &rm_int01); + setvector(0x02, BIOS_CS, &rm_int02); + setvector(0x03, BIOS_CS, &rm_int03); + setvector(0x04, BIOS_CS, &rm_int04); + setvector(0x05, BIOS_CS, &rm_int05); + setvector(0x06, BIOS_CS, &rm_int06); + setvector(0x07, BIOS_CS, &rm_int07); + setvector(0x08, BIOS_CS, &rm_int08); + setvector(0x09, BIOS_CS, &rm_int09); + setvector(0x0a, BIOS_CS, &rm_int0a); + setvector(0x0b, BIOS_CS, &rm_int0b); + setvector(0x0c, BIOS_CS, &rm_int0c); + setvector(0x0d, BIOS_CS, &rm_int0d); + setvector(0x0e, BIOS_CS, &rm_int0e); + setvector(0x0f, BIOS_CS, &rm_int0f); + setvector(0x10, BIOS_CS, &rm_int10); + setvector(0x11, BIOS_CS, &rm_int11); + setvector(0x12, BIOS_CS, &rm_int12); + setvector(0x13, BIOS_CS, &rm_int13); + setvector(0x14, BIOS_CS, &rm_int14); + setvector(0x15, BIOS_CS, &rm_int15); + setvector(0x16, BIOS_CS, &rm_int16); + setvector(0x17, BIOS_CS, &rm_int17); + setvector(0x18, BIOS_CS, &rm_int18); + setvector(0x19, BIOS_CS, &rm_int19); + setvector(0x1a, BIOS_CS, &rm_int1a); + setvector(0x1b, BIOS_CS, &rm_int1b); + setvector(0x1c, BIOS_CS, &rm_int1c); + setvector(0x1d, BIOS_CS, &rm_int1d); + setvector(0x1e, BIOS_CS, &rm_int1e); + setvector(0x1f, BIOS_CS, &rm_int1f); + + set_jmp_vector(0xfff0, &realmode_reset); + set_jmp_vector(0xfe6e, &realmode_pci_bios_call_entry); + + /* fill in data area */ + RELOC_16_WORD(0xf000, ram_in_64kb_chunks) = gd->ram_size >> 16; + RELOC_16_WORD(0xf000, bios_equipment) = 0; /* FixMe */ + + /* If we assume only one PCI hose, this PCI hose + * will own PCI bus #0, and the last PCI bus of + * that PCI hose will be the last PCI bus in the + * system. + * (This, ofcause break on multi hose systems, + * but our PCI BIOS only support one hose anyway) + */ +#ifdef CONFIG_PCI + pri_hose = pci_bus_to_hose(0); + if (NULL != pri_hose) { + /* fill in last pci bus number for use by the realmode + * PCI BIOS */ + RELOC_16_BYTE(0xf000, pci_last_bus) = pri_hose->last_busno; + } +#endif + return 0; +} |