diff options
Diffstat (limited to 'arch/blackfin/lib/string.c')
| -rw-r--r-- | arch/blackfin/lib/string.c | 274 |
1 files changed, 274 insertions, 0 deletions
diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c new file mode 100644 index 000000000..e344d3b94 --- /dev/null +++ b/arch/blackfin/lib/string.c @@ -0,0 +1,274 @@ +/* + * U-boot - string.c Contains library routines. + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <asm/mach-common/bits/dma.h> + +char *strcpy(char *dest, const char *src) +{ + char *xdest = dest; + char temp = 0; + + __asm__ __volatile__ ( + "1:\t%2 = B [%1++] (Z);\n\t" + "B [%0++] = %2;\n\t" + "CC = %2;\n\t" + "if cc jump 1b (bp);\n" + : "=a"(dest), "=a"(src), "=d"(temp) + : "0"(dest), "1"(src), "2"(temp) + : "memory"); + + return xdest; +} + +char *strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + char temp = 0; + + if (n == 0) + return xdest; + + __asm__ __volatile__ ( + "1:\t%3 = B [%1++] (Z);\n\t" + "B [%0++] = %3;\n\t" + "CC = %3;\n\t" + "if ! cc jump 2f;\n\t" + "%2 += -1;\n\t" + "CC = %2 == 0;\n\t" + "if ! cc jump 1b (bp);\n" + "2:\n" + : "=a"(dest), "=a"(src), "=da"(n), "=d"(temp) + : "0"(dest), "1"(src), "2"(n), "3"(temp) + : "memory"); + + return xdest; +} + +int strcmp(const char *cs, const char *ct) +{ + char __res1, __res2; + + __asm__ ( + "1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ + "%3 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %2 == %3;\n\t" /* compare a byte */ + "if ! cc jump 2f;\n\t" /* not equal, break out */ + "CC = %2;\n\t" /* at end of cs? */ + "if cc jump 1b (bp);\n\t" /* no, keep going */ + "jump.s 3f;\n" /* strings are equal */ + "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ + "3:\n" + : "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2) + : "0"(cs), "1"(ct)); + + return __res1; +} + +int strncmp(const char *cs, const char *ct, size_t count) +{ + char __res1, __res2; + + if (!count) + return 0; + + __asm__( + "1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ + "%4 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %3 == %4;\n\t" /* compare a byte */ + "if ! cc jump 3f;\n\t" /* not equal, break out */ + "CC = %3;\n\t" /* at end of cs? */ + "if ! cc jump 4f;\n\t" /* yes, all done */ + "%2 += -1;\n\t" /* no, adjust count */ + "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */ + "2:\t%3 = 0;\n\t" /* strings are equal */ + "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ + "4:" + : "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), "=d"(__res2) + : "0"(cs), "1"(ct), "2"(count)); + + return __res1; +} + +#ifdef bfin_write_MDMA1_D0_IRQ_STATUS +# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS +# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR +# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT +# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY +# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG +# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR +# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT +# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY +# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG +# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS +# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS +#endif +/* This version misbehaves for count values of 0 and 2^16+. + * Perhaps we should detect that ? Nowhere do we actually + * use dma memcpy for those types of lengths though ... + */ +void dma_memcpy_nocache(void *dst, const void *src, size_t count) +{ + uint16_t wdsize, mod; + + /* Disable DMA in case it's still running (older u-boot's did not + * always turn them off). Do it before the if statement below so + * we can be cheap and not do a SSYNC() due to the forced abort. + */ + bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); + + /* Scratchpad cannot be a DMA source or destination */ + if (((unsigned long)src >= L1_SRAM_SCRATCH && + (unsigned long)src < L1_SRAM_SCRATCH_END) || + ((unsigned long)dst >= L1_SRAM_SCRATCH && + (unsigned long)dst < L1_SRAM_SCRATCH_END)) + hang(); + + if (((unsigned long)dst | (unsigned long)src | count) & 0x1) { + wdsize = WDSIZE_8; + mod = 1; + } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) { + wdsize = WDSIZE_16; + count >>= 1; + mod = 2; + } else { + wdsize = WDSIZE_32; + count >>= 2; + mod = 4; + } + + /* Copy sram functions from sdram to sram */ + /* Setup destination start address */ + bfin_write_MDMA_D0_START_ADDR(dst); + /* Setup destination xcount */ + bfin_write_MDMA_D0_X_COUNT(count); + /* Setup destination xmodify */ + bfin_write_MDMA_D0_X_MODIFY(mod); + + /* Setup Source start address */ + bfin_write_MDMA_S0_START_ADDR(src); + /* Setup Source xcount */ + bfin_write_MDMA_S0_X_COUNT(count); + /* Setup Source xmodify */ + bfin_write_MDMA_S0_X_MODIFY(mod); + + /* Enable source DMA */ + bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN); + bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN); + SSYNC(); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + continue; + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_S0_CONFIG(0); +} +/* We should do a dcache invalidate on the destination after the dma, but since + * we lack such hardware capability, we'll flush/invalidate the destination + * before the dma and bank on the idea that u-boot is single threaded. + */ +void *dma_memcpy(void *dst, const void *src, size_t count) +{ + if (dcache_status()) { + blackfin_dcache_flush_range(src, src + count); + blackfin_dcache_flush_invalidate_range(dst, dst + count); + } + + dma_memcpy_nocache(dst, src, count); + + if (icache_status()) + blackfin_icache_flush_range(dst, dst + count); + + return dst; +} + +/* + * memcpy - Copy one area of memory to another + * @dest: Where to copy to + * @src: Where to copy from + * @count: The size of the area. + * + * We need to have this wrapper in memcpy() as common code may call memcpy() + * to load up L1 regions. Consider loading an ELF which has sections with + * LMA's pointing to L1. The common code ELF loader will simply use memcpy() + * to move the ELF's sections into the right place. We need to catch that + * here and redirect to dma_memcpy(). + */ +extern void *memcpy_ASM(void *dst, const void *src, size_t count); +void *memcpy(void *dst, const void *src, size_t count) +{ + if (!count) + return dst; + +#ifdef CONFIG_CMD_KGDB + if (src >= (void *)SYSMMR_BASE) { + if (count == 2 && (unsigned long)src % 2 == 0) { + u16 mmr = bfin_read16(src); + memcpy(dst, &mmr, sizeof(mmr)); + return dst; + } + if (count == 4 && (unsigned long)src % 4 == 0) { + u32 mmr = bfin_read32(src); + memcpy(dst, &mmr, sizeof(mmr)); + return dst; + } + /* Failed for some reason */ + memset(dst, 0xad, count); + return dst; + } + if (dst >= (void *)SYSMMR_BASE) { + if (count == 2 && (unsigned long)dst % 2 == 0) { + u16 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write16(dst, mmr); + return dst; + } + if (count == 4 && (unsigned long)dst % 4 == 0) { + u32 mmr; + memcpy(&mmr, src, sizeof(mmr)); + bfin_write32(dst, mmr); + return dst; + } + /* Failed for some reason */ + memset(dst, 0xad, count); + return dst; + } +#endif + + /* if L1 is the source or dst, use DMA */ + if (addr_bfin_on_chip_mem(dst) || addr_bfin_on_chip_mem(src)) + return dma_memcpy(dst, src, count); + else + /* No L1 is involved, so just call regular memcpy */ + return memcpy_ASM(dst, src, count); +} |