diff options
Diffstat (limited to 'arch/blackfin/include')
| -rw-r--r-- | arch/blackfin/include/asm/clock.h | 78 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/dma.h | 24 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/gpio.h | 62 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/mach-bf561/BF561_def.h | 2 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/mach-bf609/BF609_def.h | 5 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/portmux.h | 5 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/serial.h | 131 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/serial1.h | 342 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/serial4.h | 150 | ||||
| -rw-r--r-- | arch/blackfin/include/asm/soft_switch.h | 18 |
10 files changed, 748 insertions, 69 deletions
diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h new file mode 100644 index 000000000..f1fcd4049 --- /dev/null +++ b/arch/blackfin/include/asm/clock.h @@ -0,0 +1,78 @@ + +/* + * Copyright (C) 2012 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef __CLOCK_H__ +#define __CLOCK_H__ + +#include <asm/blackfin.h> +#ifdef PLL_CTL +#include <asm/mach-common/bits/pll.h> +# define pll_is_bypassed() (bfin_read_PLL_CTL() & BYPASS) +#else +#include <asm/mach-common/bits/cgu.h> +# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) +# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() +# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() +# define SSEL SYSSEL +# define SSEL_P SYSSEL_P +#endif + +__attribute__((always_inline)) +static inline uint32_t early_division(uint32_t dividend, uint32_t divisor) +{ + uint32_t quotient; + uint32_t i, j; + + for (quotient = 1, i = 1; dividend > divisor; ++i) { + j = divisor << i; + if (j > dividend || (j & 0x80000000)) { + --i; + quotient += (1 << i); + dividend -= (divisor << i); + i = 0; + } + } + + return quotient; +} + +__attribute__((always_inline)) +static inline uint32_t early_get_uart_clk(void) +{ + uint32_t msel, pll_ctl, vco; + uint32_t div, ssel, sclk, uclk; + + pll_ctl = bfin_read_PLL_CTL(); + msel = (pll_ctl & MSEL) >> MSEL_P; + if (msel == 0) + msel = (MSEL >> MSEL_P) + 1; + + vco = (CONFIG_CLKIN_HZ >> (pll_ctl & DF)) * msel; + sclk = vco; + if (!pll_is_bypassed()) { + div = bfin_read_PLL_DIV(); + ssel = (div & SSEL) >> SSEL_P; +#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS + sclk = vco/ssel; +#else + sclk = early_division(vco, ssel); +#endif + } + uclk = sclk; +#ifdef CGU_DIV + ssel = (div & S0SEL) >> S0SEL_P; + uclk = early_division(sclk, ssel); +#endif + return uclk; +} + +#ifdef CGU_DIV +# define get_uart_clk get_sclk0 +#else +# define get_uart_clk get_sclk +#endif + +#endif diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index ef1db6e99..8a7c07933 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -17,21 +17,21 @@ struct dmasg_large { void *next_desc_addr; - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + u32 start_addr; + u16 cfg; + u16 x_count; + s16 x_modify; + u16 y_count; + s16 y_modify; } __attribute__((packed)); struct dmasg { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + u32 start_addr; + u16 cfg; + u16 x_count; + s16 x_modify; + u16 y_count; + s16 y_modify; } __attribute__((packed)); struct dma_register { diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 05131b5e8..58a619110 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -7,6 +7,8 @@ #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ +#include <asm-generic/gpio.h> + #define gpio_bank(x) ((x) >> 4) #define gpio_bit(x) (1<<((x) & 0xF)) #define gpio_sub_n(x) ((x) & 0xF) @@ -65,10 +67,11 @@ #define PERIPHERAL_USAGE 1 #define GPIO_USAGE 0 +#define MAX_GPIOS MAX_BLACKFIN_GPIOS #ifndef __ASSEMBLY__ -#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) +#ifdef CONFIG_ADI_GPIO1 void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); @@ -140,61 +143,16 @@ struct gpio_port_t { }; #endif -#ifdef CONFIG_BFIN_GPIO_TRACK -void bfin_gpio_labels(void); -void bfin_gpio_free(unsigned gpio); -#else -#define bfin_gpio_labels() -#define bfin_gpio_free(gpio) -#define bfin_gpio_request(gpio, label) bfin_gpio_request(gpio) -#define bfin_special_gpio_request(gpio, label) bfin_special_gpio_request(gpio) -#endif - -#ifdef BFIN_SPECIAL_GPIO_BANKS -void bfin_special_gpio_free(unsigned gpio); -int bfin_special_gpio_request(unsigned gpio, const char *label); +#ifdef ADI_SPECIAL_GPIO_BANKS +void special_gpio_free(unsigned gpio); +int special_gpio_request(unsigned gpio, const char *label); #endif -int bfin_gpio_request(unsigned gpio, const char *label); -int bfin_gpio_direction_input(unsigned gpio); -int bfin_gpio_direction_output(unsigned gpio, int value); -int bfin_gpio_get_value(unsigned gpio); -void bfin_gpio_set_value(unsigned gpio, int value); -void bfin_gpio_toggle_value(unsigned gpio); - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return bfin_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - return bfin_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return bfin_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return bfin_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return bfin_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - return bfin_gpio_set_value(gpio, value); -} +void gpio_labels(void); static inline int gpio_is_valid(int number) { - return number >= 0 && number < MAX_BLACKFIN_GPIOS; + return number >= 0 && number < MAX_GPIOS; } #include <linux/ctype.h> @@ -248,7 +206,7 @@ static inline int name_to_gpio(const char *name) } #define name_to_gpio(n) name_to_gpio(n) -#define gpio_status() bfin_gpio_labels() +#define gpio_status() gpio_labels() #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/mach-bf561/BF561_def.h b/arch/blackfin/include/asm/mach-bf561/BF561_def.h index a7ff5a3fe..8fd552f2a 100644 --- a/arch/blackfin/include/asm/mach-bf561/BF561_def.h +++ b/arch/blackfin/include/asm/mach-bf561/BF561_def.h @@ -714,4 +714,6 @@ #define L1_INST_SRAM_SIZE (0xFFA03FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) +#define COREB_L1_CODE_START 0xFF600000 + #endif /* __BFIN_DEF_ADSP_BF561_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_def.h b/arch/blackfin/include/asm/mach-bf609/BF609_def.h index 8c1dcd006..02b81d3fd 100644 --- a/arch/blackfin/include/asm/mach-bf609/BF609_def.h +++ b/arch/blackfin/include/asm/mach-bf609/BF609_def.h @@ -128,6 +128,9 @@ #define EMAC0_MACCFG 0xFFC20000 /* EMAC0 MAC Configuration Register */ #define EMAC1_MACCFG 0xFFC22000 /* EMAC1 MAC Configuration Register */ +#define SPI0_REGBASE 0xFFC40400 /* SPI0 Base Address */ +#define SPI1_REGBASE 0xFFC40500 /* SPI1 Base Address */ + #define DMA10_DSCPTR_NXT 0xFFC05000 /* DMA10 Pointer to Next Initial Desc */ #define DMA10_ADDRSTART 0xFFC05004 /* DMA10 Start Address of Current Buf */ #define DMA10_CFG 0xFFC05008 /* DMA10 Configuration Register */ @@ -244,4 +247,6 @@ #define L1_INST_SRAM_SIZE 0x8000 #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) +#define COREB_L1_CODE_START 0xFF600000 + #endif /* __BFIN_DEF_ADSP_BF609_proc__ */ diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 300ef44fd..003694b51 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -17,11 +17,6 @@ #define P_MAYSHARE 0x2000 #define P_DONTCARE 0x1000 -#ifndef CONFIG_BFIN_GPIO_TRACK -#define peripheral_request(per, label) peripheral_request(per) -#define peripheral_request_list(per, label) peripheral_request_list(per) -#endif - #ifndef __ASSEMBLY__ int peripheral_request(unsigned short per, const char *label); diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h new file mode 100644 index 000000000..87a337d1b --- /dev/null +++ b/arch/blackfin/include/asm/serial.h @@ -0,0 +1,131 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL_H__ +#define __BFIN_CPU_SERIAL_H__ + +#include <asm/blackfin.h> +#include <asm/portmux.h> + +#ifndef CONFIG_UART_CONSOLE +# define CONFIG_UART_CONSOLE 0 +#endif + +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define BFIN_DEBUG_EARLY_SERIAL 1 +#else +# define BFIN_DEBUG_EARLY_SERIAL 0 +#endif + +#if defined(__ADSPBF60x__) +# define BFIN_UART_HW_VER 4 +#elif defined(__ADSPBF50x__) || defined(__ADSPBF54x__) +# define BFIN_UART_HW_VER 2 +#else +# define BFIN_UART_HW_VER 1 +#endif + +#define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx +#define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx) +#define _P_UART(n, pin) _PASTE_UART(n, P_UART, pin) +#define P_UART(pin) _P_UART(CONFIG_UART_CONSOLE, pin) + +#define pUART ((volatile struct bfin_mmr_serial *)uart_base) + +#ifndef __ASSEMBLY__ +__attribute__((always_inline)) +static inline void serial_do_portmux(void); +#endif + +#if BFIN_UART_HW_VER < 4 +# include "serial1.h" +#else +# include "serial4.h" +#endif + +#ifndef __ASSEMBLY__ + +__attribute__((always_inline)) +static inline void serial_do_portmux(void) +{ + if (!BFIN_DEBUG_EARLY_SERIAL) { + const unsigned short pins[] = { P_UART(RX), P_UART(TX), 0, }; + peripheral_request_list(pins, "bfin-uart"); + return; + } + + serial_early_do_portmux(); +} + +#ifndef BFIN_IN_INITCODE +__attribute__((always_inline)) +static inline void serial_early_puts(const char *s) +{ + if (BFIN_DEBUG_EARLY_SERIAL) { + serial_puts("Early: "); + serial_puts(s); + } +} +#endif + +#else + +.macro serial_early_init +#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM) + call __serial_early_init; +#endif +.endm + +.macro serial_early_set_baud +#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM) + R0.L = LO(CONFIG_BAUDRATE); + R0.H = HI(CONFIG_BAUDRATE); + call __serial_early_set_baud; +#endif +.endm + +#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS +#define update_serial_early_string_addr \ + R1.L = _start; \ + R1.H = _start; \ + R0 = R0 - R1; \ + R1.L = 0; \ + R1.H = 0x2000; \ + R0 = R0 + R1; +#else +#define update_serial_early_string_addr +#endif + +/* Since we embed the string right into our .text section, we need + * to find its address. We do this by getting our PC and adding 2 + * bytes (which is the length of the jump instruction). Then we + * pass this address to serial_puts(). + */ +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define serial_early_puts(str) \ + .section .rodata; \ + 7: \ + .ascii "Early:"; \ + .ascii __FILE__; \ + .ascii ": "; \ + .ascii str; \ + .asciz "\n"; \ + .previous; \ + R0.L = 7b; \ + R0.H = 7b; \ + update_serial_early_string_addr \ + call _uart_early_puts; +#else +# define serial_early_puts(str) +#endif + +#endif + +#endif diff --git a/arch/blackfin/include/asm/serial1.h b/arch/blackfin/include/asm/serial1.h new file mode 100644 index 000000000..467d3817f --- /dev/null +++ b/arch/blackfin/include/asm/serial1.h @@ -0,0 +1,342 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL1_H__ +#define __BFIN_CPU_SERIAL1_H__ + +#include <asm/mach-common/bits/uart.h> + +#ifndef __ASSEMBLY__ + +#include <asm/clock.h> + +#define MMR_UART(n) _PASTE_UART(n, UART, DLL) +#ifdef UART_DLL +# define UART0_DLL UART_DLL +# if CONFIG_UART_CONSOLE != 0 +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART +# endif +#endif +#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) + +#define LOB(x) ((x) & 0xFF) +#define HIB(x) (((x) >> 8) & 0xFF) + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +struct bfin_mmr_serial { +#if BFIN_UART_HW_VER == 2 + u16 dll; + u16 __pad_0; + u16 dlh; + u16 __pad_1; + u16 gctl; + u16 __pad_2; + u16 lcr; + u16 __pad_3; + u16 mcr; + u16 __pad_4; + u16 lsr; + u16 __pad_5; + u16 msr; + u16 __pad_6; + u16 scr; + u16 __pad_7; + u16 ier_set; + u16 __pad_8; + u16 ier_clear; + u16 __pad_9; + u16 thr; + u16 __pad_10; + u16 rbr; + u16 __pad_11; +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __spad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __spad1; + const u16 iir; + u16 __pad_0; + u16 lcr; + u16 __pad_1; + u16 mcr; + u16 __pad_2; + u16 lsr; + u16 __pad_3; + u16 msr; + u16 __pad_4; + u16 scr; + u16 __pad_5; + const u32 __spad2; + u16 gctl; + u16 __pad_6; +#endif +}; + +#define uart_lsr_t uint32_t +#define _lsr_read(p) bfin_read(&p->lsr) +#define _lsr_write(p, v) bfin_write(&p->lsr, v) + +#if BFIN_UART_HW_VER == 2 +# define ACCESS_LATCH() +# define ACCESS_PORT_IER() +#else +# define ACCESS_LATCH() bfin_write_or(&pUART->lcr, DLAB) +# define ACCESS_PORT_IER() bfin_write_and(&pUART->lcr, ~DLAB) +#endif + +__attribute__((always_inline)) +static inline void serial_early_do_mach_portmux(char port, int mux_mask, + int mux_func, int port_pin) +{ + switch (port) { +#if defined(__ADSPBF54x__) + case 'B': + bfin_write_PORTB_MUX((bfin_read_PORTB_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTB_FER(bfin_read_PORTB_FER() | port_pin); + break; + case 'E': + bfin_write_PORTE_MUX((bfin_read_PORTE_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTE_FER(bfin_read_PORTE_FER() | port_pin); + break; +#endif +#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF52x__) + case 'F': + bfin_write_PORTF_MUX((bfin_read_PORTF_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | port_pin); + break; + case 'G': + bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTG_FER(bfin_read_PORTG_FER() | port_pin); + break; + case 'H': + bfin_write_PORTH_MUX((bfin_read_PORTH_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTH_FER(bfin_read_PORTH_FER() | port_pin); + break; +#endif + default: + break; + } +} + +__attribute__((always_inline)) +static inline void serial_early_do_portmux(void) +{ +#if defined(__ADSPBF50x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('G', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PG12); /* TX: G; mux 7; func 1; PG12 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PG13); /* RX: G; mux 7; func 1; PG13 */ + break; + case 1: + serial_early_do_mach_portmux('F', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_1, PF7); /* TX: F; mux 3; func 1; PF6 */ + serial_early_do_mach_portmux('F', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_1, PF6); /* RX: F; mux 3; func 1; PF7 */ + break; + } +#elif defined(__ADSPBF51x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('G', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_2, PG9); /* TX: G; mux 5; func 2; PG9 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_2, PG10); /* RX: G; mux 5; func 2; PG10 */ + break; + case 1: + serial_early_do_mach_portmux('H', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_2, PH7); /* TX: H; mux 3; func 2; PH6 */ + serial_early_do_mach_portmux('H', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_2, PH6); /* RX: H; mux 3; func 2; PH7 */ + break; + } +#elif defined(__ADSPBF52x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('G', PORT_x_MUX_2_MASK, + PORT_x_MUX_2_FUNC_3, PG7); /* TX: G; mux 2; func 3; PG7 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_2_MASK, + PORT_x_MUX_2_FUNC_3, PG8); /* RX: G; mux 2; func 3; PG8 */ + break; + case 1: + serial_early_do_mach_portmux('F', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_3, PF14); /* TX: F; mux 5; func 3; PF14 */ + serial_early_do_mach_portmux('F', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_3, PF15); /* RX: F; mux 5; func 3; PF15 */ + break; + } +#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) + const uint16_t func[] = { PFDE, PFTE, }; + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | + (1 << P_IDENT(P_UART(RX))) | + (1 << P_IDENT(P_UART(TX)))); +#elif defined(__ADSPBF54x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('E', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PE7); /* TX: E; mux 7; func 1; PE7 */ + serial_early_do_mach_portmux('E', PORT_x_MUX_8_MASK, + PORT_x_MUX_8_FUNC_1, PE8); /* RX: E; mux 8; func 1; PE8 */ + break; + case 1: + serial_early_do_mach_portmux('H', PORT_x_MUX_0_MASK, + PORT_x_MUX_0_FUNC_1, PH0); /* TX: H; mux 0; func 1; PH0 */ + serial_early_do_mach_portmux('H', PORT_x_MUX_1_MASK, + PORT_x_MUX_1_FUNC_1, PH1); /* RX: H; mux 1; func 1; PH1 */ + break; + case 2: + serial_early_do_mach_portmux('B', PORT_x_MUX_4_MASK, + PORT_x_MUX_4_FUNC_1, PB4); /* TX: B; mux 4; func 1; PB4 */ + serial_early_do_mach_portmux('B', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_1, PB5); /* RX: B; mux 5; func 1; PB5 */ + break; + case 3: + serial_early_do_mach_portmux('B', PORT_x_MUX_6_MASK, + PORT_x_MUX_6_FUNC_1, PB6); /* TX: B; mux 6; func 1; PB6 */ + serial_early_do_mach_portmux('B', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PB7); /* RX: B; mux 7; func 1; PB7 */ + break; + } +#elif defined(__ADSPBF561__) + /* UART pins could be GPIO, but they aren't pin muxed. */ +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif +#endif + SSYNC(); +} + +__attribute__((always_inline)) +static inline int uart_init(uint32_t uart_base) +{ + /* always enable UART -- avoids anomalies 05000309 and 05000350 */ + bfin_write(&pUART->gctl, UCEN); + + /* Set LCR to Word Lengh 8-bit word select */ + bfin_write(&pUART->lcr, WLS_8); + + SSYNC(); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UCEN */ + bfin_write(&pUART->gctl, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) +{ + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. The + * weird multiplication is to make sure we over sample just + * a little rather than under sample the incoming signals. + */ +#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS + uint16_t divisor = (early_get_uart_clk() + baud * 8) / (baud * 16) + - ANOMALY_05000230; +#else + uint16_t divisor = early_division(early_get_uart_clk() + (baud * 8), + baud * 16) - ANOMALY_05000230; +#endif + + serial_set_divisor(uart_base, divisor); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint16_t divisor) +{ + uint32_t uart_base = UART_BASE; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint16_t serial_early_get_div(void) +{ + uint32_t uart_base = UART_BASE; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + uint8_t dll = bfin_read(&pUART->dll); + uint8_t dlh = bfin_read(&pUART->dlh); + uint16_t divisor = (dlh << 8) | dll; + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); + + return divisor; +} + +#endif + +#endif diff --git a/arch/blackfin/include/asm/serial4.h b/arch/blackfin/include/asm/serial4.h new file mode 100644 index 000000000..65483960b --- /dev/null +++ b/arch/blackfin/include/asm/serial4.h @@ -0,0 +1,150 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL4_H__ +#define __BFIN_CPU_SERIAL4_H__ + +#include <asm/mach-common/bits/uart4.h> + +#ifndef __ASSEMBLY__ + +#include <asm/clock.h> + +#define MMR_UART(n) _PASTE_UART(n, UART, REVID) +#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) + +struct bfin_mmr_serial { + u32 revid; + u32 control; + u32 status; + u32 scr; + u32 clock; + u32 emask; + u32 emaskst; + u32 emaskcl; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv_cnt; + u32 rxdiv_cnt; +}; +#define uart_lsr_t uint32_t +#define _lsr_read(p) bfin_read(&p->status) +#define _lsr_write(p, v) bfin_write(&p->status, v) + +__attribute__((always_inline)) +static inline void serial_early_do_mach_portmux(char port, int mux_mask, + int mux_func, int port_pin) +{ + switch (port) { + case 'D': + bfin_write_PORTD_MUX((bfin_read_PORTD_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTD_FER_SET(port_pin); + break; + case 'G': + bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTG_FER_SET(port_pin); + break; + } +} + +__attribute__((always_inline)) +static inline void serial_early_do_portmux(void) +{ +#if defined(__ADSPBF60x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('D', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_2, PD7); /* TX: D; mux 7; func 2; PD7 */ + serial_early_do_mach_portmux('D', PORT_x_MUX_8_MASK, + PORT_x_MUX_8_FUNC_2, PD8); /* RX: D; mux 8; func 2; PD8 */ + break; + case 1: + serial_early_do_mach_portmux('G', PORT_x_MUX_15_MASK, + PORT_x_MUX_15_FUNC_1, PG15); /* TX: G; mux 15; func 1; PG15 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_14_MASK, + PORT_x_MUX_14_FUNC_1, PG14); /* RX: G; mux 14; func 1; PG14 */ + break; + } +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif +#endif + SSYNC(); +} + +__attribute__((always_inline)) +static inline int uart_init(uint32_t uart_base) +{ + /* always enable UART to 8-bit mode */ + bfin_write(&pUART->control, UEN | UMOD_UART | WLS_8); + + SSYNC(); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UEN */ + bfin_write(&pUART->control, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) +{ + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->clock, divisor); + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + uint16_t divisor = early_division(early_get_uart_clk(), baud * 16); + + /* Program the divisor to get the baud rate we want */ + serial_set_divisor(uart_base, divisor); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint32_t divisor) +{ + uint32_t uart_base = UART_BASE; + bfin_write(&pUART->clock, divisor); +} + +__attribute__((always_inline)) +static inline uint32_t serial_early_get_div(void) +{ + uint32_t uart_base = UART_BASE; + return bfin_read(&pUART->clock); +} + +#endif + +#endif diff --git a/arch/blackfin/include/asm/soft_switch.h b/arch/blackfin/include/asm/soft_switch.h new file mode 100644 index 000000000..ff8e44d8b --- /dev/null +++ b/arch/blackfin/include/asm/soft_switch.h @@ -0,0 +1,18 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __SOFT_SWITCH_H__ +#define __SOFT_SWITCH_H__ + +#define IO_PORT_A 0 +#define IO_PORT_B 1 +#define IO_PORT_INPUT 0 +#define IO_PORT_OUTPUT 1 + +int config_switch_bit(int num, int port, int bit, int dir, uchar value); +#endif |