diff options
Diffstat (limited to 'arch/arm')
109 files changed, 2749 insertions, 2473 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 461899eab..e80e1ed1a 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -31,6 +31,9 @@ CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 endif endif +LDFLAGS_FINAL += --gc-sections +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections + # Support generic board on ARM __HAVE_ARCH_GENERIC_BOARD := y @@ -106,3 +109,8 @@ ifeq ($(GAS_BUG_12532),y) PLATFORM_RELFLAGS += -fno-optimize-sibling-calls endif endif + +# check that only R_ARM_RELATIVE relocations are generated +ifneq ($(CONFIG_SPL_BUILD),y) +ALL-y += checkarmreloc +endif diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index ccea2d5cb..a7e0c28c9 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -104,10 +104,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -146,24 +142,6 @@ reset: orr r0,r0,#0xd3 msr cpsr,r0 -#ifdef CONFIG_OMAP2420H4 - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - bl cpy_clk_code /* put dpll adjust code behind vectors */ -#endif /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit @@ -173,83 +151,6 @@ next: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - bx lr - -#ifndef CONFIG_SPL_BUILD - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - -#endif - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index f20da8eb7..65292bcf8 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -112,10 +112,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -225,79 +221,6 @@ skip_tcmdisable: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 9facc7e69..a396ebcb7 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -101,10 +101,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -155,79 +151,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - mov pc, lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: @@ -244,9 +167,9 @@ c_runtime_cpu_setup: ************************************************************************* */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT cpu_init_crit: -#if !defined(CONFIG_TEGRA) mov ip, lr /* * before relocating, we have to setup RAM timing @@ -255,9 +178,9 @@ cpu_init_crit: */ bl lowlevel_init mov lr, ip -#endif mov pc, lr +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #ifndef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index cf55bf7d4..367c805e3 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -31,6 +31,7 @@ SECTIONS . = ALIGN(4); .text : { + *(.__image_copy_start) arch/arm/cpu/arm920t/start.o (.text*) /* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */ . = 0x1000; @@ -56,7 +57,10 @@ SECTIONS . = ALIGN(4); - __image_copy_end = .; + .image_copy_end : + { + *(.__image_copy_end) + } __bss_start = .; .bss : { *(.bss*) } diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 62500250e..323206512 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -89,10 +89,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -194,79 +190,6 @@ copyex: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - mov pc, lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 021e2418d..97eb276b5 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -95,10 +95,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -184,79 +180,6 @@ poll1: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - mov pc, lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile index 346e58fae..c4408f6c9 100644 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ b/arch/arm/cpu/arm926ejs/at91/Makefile @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o COBJS-$(CONFIG_AT91_EFLASH) += eflash.o COBJS-$(CONFIG_AT91_LED) += led.o diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 19ec615c7..5e995e1d0 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -203,6 +203,10 @@ void at91_macb_hw_init(void) #if defined(CONFIG_GENERIC_ATMEL_MCI) void at91_mci_hw_init(void) { + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ #if defined(CONFIG_ATMEL_MCI_PORTB) at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c new file mode 100644 index 000000000..6eaeac0fc --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2013 Atmel Corporation + * Josh Wu <josh.wu@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pio.h> + +unsigned int has_lcdc() +{ + return 1; +} + +void at91_serial0_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ + writel(1 << ATMEL_ID_USART3, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 1); +} +#endif + +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ + + writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); +} + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */ + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); +} +#endif diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c index f825388ae..5b4923f3b 100644 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ b/arch/arm/cpu/arm926ejs/at91/clock.c @@ -156,7 +156,7 @@ int at91_clock_init(unsigned long main_clock) */ mckr = readl(&pmc->mckr); #if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ - || defined(CONFIG_AT91SAM9X5) + || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) /* plla divisor by 2 */ gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); #endif @@ -171,7 +171,7 @@ int at91_clock_init(unsigned long main_clock) if (mckr & AT91_PMC_MCKR_MDIV_MASK) freq /= 2; /* processor clock division */ #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ - || defined(CONFIG_AT91SAM9X5) + || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) /* mdiv <==> divisor * 0 <==> 1 * 1 <==> 2 diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index dec7bfbfa..bba4671f7 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM365) += dm365.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_SOC_DM646X) += dm646x.o +COBJS-$(CONFIG_SOC_DA830) += da830_pinmux.o COBJS-$(CONFIG_SOC_DA850) += da850_pinmux.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c new file mode 100644 index 000000000..d0c964a34 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c @@ -0,0 +1,151 @@ +/* + * Pinmux configurations for the DA830 SoCs + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/davinci_misc.h> +#include <asm/arch/hardware.h> +#include <asm/arch/pinmux_defs.h> + +/* SPI0 pin muxer settings */ +const struct pinmux_config spi0_pins_base[] = { + { pinmux(7), 1, 3 }, /* SPI0_SOMI */ + { pinmux(7), 1, 4 }, /* SPI0_SIMO */ + { pinmux(7), 1, 6 } /* SPI0_CLK */ +}; + +const struct pinmux_config spi0_pins_scs0[] = { + { pinmux(7), 1, 7 } /* SPI0_SCS[0] */ +}; + +const struct pinmux_config spi0_pins_ena[] = { + { pinmux(7), 1, 5 } /* SPI0_ENA */ +}; + +/* NAND pin muxer settings */ +const struct pinmux_config emifa_pins_cs0[] = { + { pinmux(18), 1, 2 } /* EMA_CS[0] */ +}; + +const struct pinmux_config emifa_pins_cs2[] = { + { pinmux(18), 1, 3 } /* EMA_CS[2] */ +}; + +const struct pinmux_config emifa_pins_cs3[] = { + { pinmux(18), 1, 4 } /* EMA_CS[3] */ +}; + +#ifdef CONFIG_USE_NAND +const struct pinmux_config emifa_pins[] = { + { pinmux(13), 1, 6 }, /* EMA_D[0] */ + { pinmux(13), 1, 7 }, /* EMA_D[1] */ + { pinmux(14), 1, 0 }, /* EMA_D[2] */ + { pinmux(14), 1, 1 }, /* EMA_D[3] */ + { pinmux(14), 1, 2 }, /* EMA_D[4] */ + { pinmux(14), 1, 3 }, /* EMA_D[5] */ + { pinmux(14), 1, 4 }, /* EMA_D[6] */ + { pinmux(14), 1, 5 }, /* EMA_D[7] */ + { pinmux(14), 1, 6 }, /* EMA_D[8] */ + { pinmux(14), 1, 7 }, /* EMA_D[9] */ + { pinmux(15), 1, 0 }, /* EMA_D[10] */ + { pinmux(15), 1, 1 }, /* EMA_D[11] */ + { pinmux(15), 1, 2 }, /* EMA_D[12] */ + { pinmux(15), 1, 3 }, /* EMA_D[13] */ + { pinmux(15), 1, 4 }, /* EMA_D[14] */ + { pinmux(15), 1, 5 }, /* EMA_D[15] */ + { pinmux(15), 1, 6 }, /* EMA_A[0] */ + { pinmux(15), 1, 7 }, /* EMA_A[1] */ + { pinmux(16), 1, 0 }, /* EMA_A[2] */ + { pinmux(16), 1, 1 }, /* EMA_A[3] */ + { pinmux(16), 1, 2 }, /* EMA_A[4] */ + { pinmux(16), 1, 3 }, /* EMA_A[5] */ + { pinmux(16), 1, 4 }, /* EMA_A[6] */ + { pinmux(16), 1, 5 }, /* EMA_A[7] */ + { pinmux(16), 1, 6 }, /* EMA_A[8] */ + { pinmux(16), 1, 7 }, /* EMA_A[9] */ + { pinmux(17), 1, 0 }, /* EMA_A[10] */ + { pinmux(17), 1, 1 }, /* EMA_A[11] */ + { pinmux(17), 1, 2 }, /* EMA_A[12] */ + { pinmux(17), 1, 3 }, /* EMA_BA[1] */ + { pinmux(17), 1, 4 }, /* EMA_BA[0] */ + { pinmux(17), 1, 5 }, /* EMA_CLK */ + { pinmux(17), 1, 6 }, /* EMA_SDCKE */ + { pinmux(17), 1, 7 }, /* EMA_CAS */ + { pinmux(18), 1, 0 }, /* EMA_CAS */ + { pinmux(18), 1, 1 }, /* EMA_WE */ + { pinmux(18), 1, 5 }, /* EMA_OE */ + { pinmux(18), 1, 6 }, /* EMA_WE_DQM[1] */ + { pinmux(18), 1, 7 }, /* EMA_WE_DQM[0] */ + { pinmux(10), 1, 0 } /* Tristate */ +}; +#endif + +/* EMAC PHY interface pins */ +const struct pinmux_config emac_pins_rmii[] = { + { pinmux(10), 2, 1 }, /* RMII_TXD[0] */ + { pinmux(10), 2, 2 }, /* RMII_TXD[1] */ + { pinmux(10), 2, 3 }, /* RMII_TXEN */ + { pinmux(10), 2, 4 }, /* RMII_CRS_DV */ + { pinmux(10), 2, 5 }, /* RMII_RXD[0] */ + { pinmux(10), 2, 6 }, /* RMII_RXD[1] */ + { pinmux(10), 2, 7 } /* RMII_RXER */ +}; + +const struct pinmux_config emac_pins_mdio[] = { + { pinmux(11), 2, 0 }, /* MDIO_CLK */ + { pinmux(11), 2, 1 } /* MDIO_D */ +}; + +const struct pinmux_config emac_pins_rmii_clk_source[] = { + { pinmux(9), 0, 5 } /* ref.clk from external source */ +}; + +/* UART2 pin muxer settings */ +const struct pinmux_config uart2_pins_txrx[] = { + { pinmux(8), 2, 7 }, /* UART2_RXD */ + { pinmux(9), 2, 0 } /* UART2_TXD */ +}; + +/* I2C0 pin muxer settings */ +const struct pinmux_config i2c0_pins[] = { + { pinmux(8), 2, 3 }, /* I2C0_SDA */ + { pinmux(8), 2, 4 } /* I2C0_SCL */ +}; + +/* USB0_DRVVBUS pin muxer settings */ +const struct pinmux_config usb_pins[] = { + { pinmux(9), 1, 1 } /* USB0_DRVVBUS */ +}; + +#ifdef CONFIG_DAVINCI_MMC +/* MMC0 pin muxer settings */ +const struct pinmux_config mmc0_pins_8bit[] = { + { pinmux(15), 2, 7 }, /* MMCSD0_CLK */ + { pinmux(16), 2, 0 }, /* MMCSD0_CMD */ + { pinmux(13), 2, 6 }, /* MMCSD0_DAT_0 */ + { pinmux(13), 2, 7 }, /* MMCSD0_DAT_1 */ + { pinmux(14), 2, 0 }, /* MMCSD0_DAT_2 */ + { pinmux(14), 2, 1 }, /* MMCSD0_DAT_3 */ + { pinmux(14), 2, 2 }, /* MMCSD0_DAT_4 */ + { pinmux(14), 2, 3 }, /* MMCSD0_DAT_5 */ + { pinmux(14), 2, 4 }, /* MMCSD0_DAT_6 */ + { pinmux(14), 2, 5 } /* MMCSD0_DAT_7 */ + /* DA830 supports 8-bit mode */ +}; +#endif diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index 673c725ab..f4e7525f1 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -57,11 +57,6 @@ SECTIONS __rel_dyn_end = .; } - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - .bss : { . = ALIGN(4); __bss_start = .; diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index 967a135b3..446d09501 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -57,11 +57,6 @@ SECTIONS __rel_dyn_end = .; } - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - .bss : { . = ALIGN(4); __bss_start = .; diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 4c5671109..5fc8e0459 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -136,10 +136,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -190,83 +186,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - bx lr - -#ifndef CONFIG_SPL_BUILD - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - -#endif - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 9c2b70db0..e9d0c34c9 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -105,10 +105,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -159,79 +155,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - mov pc, lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 5e8c5289f..8dfd91974 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -101,10 +101,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -155,79 +151,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 885fb2d20..b935a29a3 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -149,3 +149,43 @@ int arch_misc_init(void) #endif return 0; } + +#ifdef CONFIG_SPL_BUILD +void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +void uart_soft_reset(void) +{ + struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; + u32 regval; + + regval = readl(&uart_base->uartsyscfg); + regval |= UART_RESET; + writel(regval, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regval = readl(&uart_base->uartsyscfg); + regval |= UART_SMART_IDLE_EN; + writel(regval, &uart_base->uartsyscfg); +} +#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index a1efc7520..9c4d0b439 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -246,7 +246,7 @@ static void enable_per_clocks(void) ; } -static void mpu_pll_config(void) +void mpu_pll_config_val(int mpull_m) { u32 clkmode, clksel, div_m2; @@ -260,7 +260,7 @@ static void mpu_pll_config(void) ; clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((MPUPLL_M << CLK_SEL_SHIFT) | MPUPLL_N); + clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N); writel(clksel, &cmwkup->clkseldpllmpu); div_m2 = div_m2 & ~CLK_DIV_MASK; @@ -274,6 +274,11 @@ static void mpu_pll_config(void) ; } +static void mpu_pll_config(void) +{ + mpu_pll_config_val(CONFIG_SYS_MPUCLK); +} + static void core_pll_config(void) { u32 clkmode, clksel, div_m4, div_m5, div_m6; diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/cpu/armv7/at91/Makefile new file mode 100644 index 000000000..040c67d51 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2013 +# Bo Shen <voice.shen@atmel.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-$(CONFIG_SAMA5D3) += sama5d3_devices.o +COBJS-y += clock.o +COBJS-y += cpu.o +COBJS-y += reset.o +COBJS-y += timer.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c new file mode 100644 index 000000000..624b52cc3 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/clock.c @@ -0,0 +1,125 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return CONFIG_SYS_AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->arch.main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->arch.plla_rate_hz; + } + + return 0; +} + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 18) & 0x7f; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else { + freq = 0; + } + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + } +#endif + gd->arch.main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); + + /* plla divisor by 2 */ + if (mckr & (1 << 12)) + gd->arch.plla_rate_hz >>= 1; + + gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->arch.mck_rate_hz; + + /* prescale */ + freq >>= mckr & AT91_PMC_MCKR_PRES_MASK; + + switch (mckr & AT91_PMC_MCKR_MDIV_MASK) { + case AT91_PMC_MCKR_MDIV_2: + gd->arch.mck_rate_hz = freq / 2; + break; + case AT91_PMC_MCKR_MDIV_3: + gd->arch.mck_rate_hz = freq / 3; + break; + case AT91_PMC_MCKR_MDIV_4: + gd->arch.mck_rate_hz = freq / 4; + break; + default: + break; + } + + gd->arch.cpu_clk_rate_hz = freq; + + return 0; +} + +void at91_periph_clk_enable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + if (id > 31) + writel(1 << (id - 32), &pmc->pcer1); + else + writel(1 << id, &pmc->pcer); +} diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c new file mode 100644 index 000000000..3df6143d7 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/cpu.c @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_dbu.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_gpbr.h> +#include <asm/arch/clk.h> + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} + +void arch_preboot_os(void) +{ + ulong cpiv; + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); + + /* + * Disable PITC + * Add 0x1000 to current counter to stop it faster + * without waiting for wrapping back to 0 + */ + writel(cpiv + 0x1000, &pit->mr); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU: %s\n", get_cpu_name()); + printf("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + return 0; +} +#endif + +void enable_caches(void) +{ +} + +unsigned int get_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID); +} diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c new file mode 100644 index 000000000..b9f83d91b --- /dev/null +++ b/arch/arm/cpu/armv7/at91/reset.c @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_rstc.h> + +/* Reset the cpu by telling the reset controller to do so */ +void reset_cpu(ulong ignored) +{ + at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC; + + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + do { } while (1); +} diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c new file mode 100644 index 000000000..acf8b43ee --- /dev/null +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2012-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/sama5d3.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> + +unsigned int has_emac() +{ + return cpu_is_sama5d31() || cpu_is_sama5d35(); +} + +unsigned int has_gmac() +{ + return !cpu_is_sama5d31(); +} + +unsigned int has_lcdc() +{ + return !cpu_is_sama5d35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama5d3()) + switch (extension_id) { + case ARCH_EXID_SAMA5D31: + return "SAMA5D31"; + case ARCH_EXID_SAMA5D33: + return "SAMA5D33"; + case ARCH_EXID_SAMA5D34: + return "SAMA5D34"; + case ARCH_EXID_SAMA5D35: + return "SAMA5D35"; + default: + return "Unknown CPU type"; + } + else + return "Unknown CPU type"; +} + +void at91_serial0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART0); +} + +void at91_serial1_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART1); +} + +void at91_serial2_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ + at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART2); +} + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SYS); +} + +#if defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTD, 13, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTD, 14, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTD, 15, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTD, 16, 1); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SPI0); +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ +#ifdef CONFIG_ATMEL_MCI_8BIT + at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ + at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ + at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ + at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ +#endif + at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_EMAC); +} +#endif + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + + /* The lower 16-bit of LCD only available on Port A */ + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_LCDC); +} +#endif diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c new file mode 100644 index 000000000..b3a450fb3 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/timer.c @@ -0,0 +1,139 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <div64.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * We're using the SAMA5D3x PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. + */ + +#define TIMER_LOAD_VAL 0xfffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->arch.timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->arch.timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + +/* + * Use the PITC in full 32 bit incrementing mode + */ +int timer_init(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + /* Enable PITC Clock */ + at91_periph_clk_enable(ATMEL_ID_SYS); + + /* Enable PITC */ + writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); + + gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; + gd->arch.tbu = 0; + gd->arch.tbl = 0; + + return 0; +} + +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + ulong now = readl(&pit->piir); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = usec_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * get_timer(base) can be used to check for timeouts or + * to measure elasped time relative to an event: + * + * ulong start_time = get_timer(0) sets start_time to the current + * time value. + * get_timer(start_time) returns the time elapsed since then. + * + * The time is used in CONFIG_SYS_HZ units! + */ +ulong get_timer(ulong base) +{ + return tick_to_time(get_ticks()) - base; +} + +/* + * Return the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return gd->arch.timer_rate_hz; +} diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index 9119961d9..b2f9152e1 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS += clock.o power.o soc.o system.o pinmux.o +COBJS += clock.o power.o soc.o system.o pinmux.o tzpc.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 223660aab..e1c42462e 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -116,10 +116,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ fout = (m + k / 1024) * (freq / (p * (1 << s))); } else { - if (s < 1) - s = 1; - /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ - fout = m * (freq / (p * (1 << (s - 1)))); + /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ + fout = m * (freq / (p * (1 << s))); } return fout; @@ -613,7 +611,7 @@ static unsigned long exynos4_get_mmc_clk(int dev_index) (struct exynos4_clock *)samsung_get_base_clock(); unsigned long uclk, sclk; unsigned int sel, ratio, pre_ratio; - int shift; + int shift = 0; sel = readl(&clk->src_fsys); sel = (sel >> (dev_index << 2)) & 0xf; @@ -662,7 +660,7 @@ static unsigned long exynos5_get_mmc_clk(int dev_index) (struct exynos5_clock *)samsung_get_base_clock(); unsigned long uclk, sclk; unsigned int sel, ratio, pre_ratio; - int shift; + int shift = 0; sel = readl(&clk->src_fsys); sel = (sel >> (dev_index << 2)) & 0xf; diff --git a/arch/arm/cpu/armv7/exynos/tzpc.c b/arch/arm/cpu/armv7/exynos/tzpc.c new file mode 100644 index 000000000..f5e8e9c47 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/tzpc.c @@ -0,0 +1,57 @@ +/* + * Lowlevel setup for SMDK5250 board based on S5PC520 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/tzpc.h> +#include <asm/io.h> + +/* Setting TZPC[TrustZone Protection Controller] */ +void tzpc_init(void) +{ + struct exynos_tzpc *tzpc; + unsigned int addr, start = 0, end = 0; + + start = samsung_get_base_tzpc(); + + if (cpu_is_exynos5()) + end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET); + else if (cpu_is_exynos4()) + end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET); + + for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) { + tzpc = (struct exynos_tzpc *)addr; + + if (addr == start) + writel(R0SIZE, &tzpc->r0size); + + writel(DECPROTXSET, &tzpc->decprot0set); + writel(DECPROTXSET, &tzpc->decprot1set); + + if (cpu_is_exynos5() && (addr == end)) + break; + + writel(DECPROTXSET, &tzpc->decprot2set); + writel(DECPROTXSET, &tzpc->decprot3set); + } +} diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 55e82ba36..c4b9809ad 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -34,6 +34,7 @@ COBJS += hwinit-common.o COBJS += clocks-common.o COBJS += emif-common.o COBJS += vc.o +COBJS += abb.o endif ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c new file mode 100644 index 000000000..87d1fb82e --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/abb.c @@ -0,0 +1,137 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + return -1; +} + +static void abb_setup_timings(u32 setup) +{ + u32 sys_rate, sr2_cnt, clk_cycles; + + /* + * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a + * transition and must be programmed with the correct time at boot. + * The value programmed into the register is the number of SYS_CLK + * clock cycles that match a given wall time profiled for the ldo. + * This value depends on: + * settling time of ldo in micro-seconds (varies per OMAP family), + * of clock cycles per SYS_CLK period (varies per OMAP family), + * the SYS_CLK frequency in MHz (varies per board) + * The formula is: + * + * ldo settling time (in micro-seconds) + * SR2_WTCNT_VALUE = ------------------------------------------ + * (# system clock cycles) * (sys_clk period) + * + * Put another way: + * + * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate)) + * + * To avoid dividing by zero multiply both "# clock cycles" and + * "settling time" by 10 such that the final result is the one we want. + */ + + /* calculate SR2_WTCNT_VALUE */ + sys_rate = DIV_ROUND(V_OSCK, 1000000); + clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate); + sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles); + + setbits_le32(setup, + sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1)); +} + +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp) +{ + u32 abb_type_mask, opp_sel_mask; + + /* sanity check */ + if (!setup || !control || !txdone) + return; + + /* setup ABB only in case of Fast or Slow OPP */ + switch (opp) { + case OMAP_ABB_FAST_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK; + break; + case OMAP_ABB_SLOW_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK; + break; + default: + return; + } + + /* + * For some OMAP silicons additional setup for LDOVBB register is + * required. This is determined by data retrieved from corresponding + * OPP EFUSE register. Data, which is retrieved from EFUSE - is + * ABB enable/disable flag and VSET value, which must be copied + * to LDOVBB register. If function call fails - return quietly, + * it means no ABB is required for such silicon. + * + * For silicons, which don't require LDOVBB setup "fuse" and + * "ldovbb" offsets are not defined. ABB will be initialized in + * the common way for them. + */ + if (fuse && ldovbb) { + if (abb_setup_ldovbb(fuse, ldovbb)) + return; + } + + /* clear ABB registers */ + writel(0, setup); + writel(0, control); + + /* configure timings, based on oscillator value */ + abb_setup_timings(setup); + + /* clear pending interrupts before setup */ + setbits_le32(txdone, txdone_mask); + + /* select ABB type */ + setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK); + + /* initiate ABB ldo change */ + setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK); + + /* wait until transition complete */ + if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY)) + puts("Error: ABB txdone is not set\n"); + + /* clear ABB tranxdone */ + setbits_le32(txdone, txdone_mask); +} diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index bff7e9c82..76ae1b675 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -25,6 +25,45 @@ DECLARE_GLOBAL_DATA_PTR; +void save_omap_boot_params(void) +{ + u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + u8 boot_device; + u32 dev_desc, dev_data; + + if ((rom_params < NON_SECURE_SRAM_START) || + (rom_params > NON_SECURE_SRAM_END)) + return; + + /* + * rom_params can be type casted to omap_boot_parameters and + * used. But it not correct to assume that romcode structure + * encoding would be same as u-boot. So use the defined offsets. + */ + gd->arch.omap_boot_params.omap_bootdevice = boot_device = + *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + + gd->arch.omap_boot_params.ch_flags = + *((u8 *)(rom_params + CH_FLAGS_OFFSET)); + + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) + if ((omap_hw_init_context() == + OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { + gd->arch.omap_boot_params.omap_bootmode = + *((u8 *)(rom_params + BOOT_MODE_OFFSET)); + } else +#endif + { + dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); + dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); + gd->arch.omap_boot_params.omap_bootmode = + *((u32 *)(dev_data + BOOT_MODE_OFFSET)); + } + } +} + #ifdef CONFIG_SPL_BUILD u32 spl_boot_device(void) { diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 99910cdcb..ef23127bb 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -30,9 +30,10 @@ * MA 02111-1307 USA */ #include <common.h> +#include <i2c.h> #include <asm/omap_common.h> #include <asm/gpio.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/utils.h> #include <asm/omap_gpio.h> @@ -49,13 +50,12 @@ const u32 sys_clk_array[8] = { 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ + 20000000, /* 20 MHz */ 16800000, /* 16.8 MHz */ 19200000, /* 19.2 MHz */ 26000000, /* 26 MHz */ 27000000, /* 27 MHz */ 38400000, /* 38.4 MHz */ - 20000000, /* 20 MHz */ }; static inline u32 __get_sys_clk_index(void) @@ -74,13 +74,6 @@ static inline u32 __get_sys_clk_index(void) /* SYS_CLKSEL - 1 to match the dpll param array indices */ ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; - /* - * SYS_CLKSEL value for 20MHz is 0. This is introduced newly - * in DRA7XX socs. SYS_CLKSEL -1 will be greater than - * NUM_SYS_CLK. So considering the last 3 bits as the index - * for the dpll param array. - */ - ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK; } return ind; } @@ -440,6 +433,12 @@ static void setup_non_essential_dplls(void) params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; + + if (omap_revision() == DRA752_ES1_0) + /* Select the sys clk for dpll_abe */ + clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel, + CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK, + CM_ABE_PLL_SYS_CLKSEL_SYSCLK2); #else abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; /* @@ -487,6 +486,10 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) u32 offset = volt_mv; int ret = 0; + if (!volt_mv) + return; + + pmic->pmic_bus_init(); /* See if we can first get the GPIO if needed */ if (pmic->gpio_en) ret = gpio_request(pmic->gpio, "PMIC_GPIO"); @@ -509,14 +512,45 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); - if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, - vcore_reg, offset_code)) + if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); if (pmic->gpio_en) gpio_direction_output(pmic->gpio, 1); } +static u32 optimize_vcore_voltage(struct volts const *v) +{ + u32 val; + if (!v->value) + return 0; + if (!v->efuse.reg) + return v->value; + + switch (v->efuse.reg_bits) { + case 16: + val = readw(v->efuse.reg); + break; + case 32: + val = readl(v->efuse.reg); + break; + default: + printf("Error: efuse 0x%08x bits=%d unknown\n", + v->efuse.reg, v->efuse.reg_bits); + return v->value; + } + + if (!val) { + printf("Error: efuse 0x%08x bits=%d val=0, using %d\n", + v->efuse.reg, v->efuse.reg_bits, v->value); + return v->value; + } + + debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n", + __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val); + return val; +} + /* * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva * We set the maximum voltages allowed here because Smart-Reflex is not @@ -525,16 +559,34 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) */ void scale_vcores(struct vcores_data const *vcores) { - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + u32 val; + + val = optimize_vcore_voltage(&vcores->core); + do_scale_vcore(vcores->core.addr, val, vcores->core.pmic); + + val = optimize_vcore_voltage(&vcores->mpu); + do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic); + + /* Configure MPU ABB LDO after scale */ + abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, + (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, + (*prcm)->prm_abbldo_mpu_setup, + (*prcm)->prm_abbldo_mpu_ctrl, + (*prcm)->prm_irqstatus_mpu_2, + OMAP_ABB_MPU_TXDONE_MASK, + OMAP_ABB_FAST_OPP); - do_scale_vcore(vcores->core.addr, vcores->core.value, - vcores->core.pmic); + val = optimize_vcore_voltage(&vcores->mm); + do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic); - do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, - vcores->mpu.pmic); + val = optimize_vcore_voltage(&vcores->gpu); + do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic); - do_scale_vcore(vcores->mm.addr, vcores->mm.value, - vcores->mm.pmic); + val = optimize_vcore_voltage(&vcores->eve); + do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic); + + val = optimize_vcore_voltage(&vcores->iva); + do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { /* Configure LDO SRAM "magic" bits */ @@ -710,6 +762,7 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); + timer_init(); scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL @@ -725,3 +778,13 @@ void prcm_init(void) if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) enable_basic_uboot_clocks(); } + +void gpi2c_init(void) +{ + static int gpi2c = 1; + + if (gpi2c) { + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + gpi2c = 0; + } +} diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 11e830a53..652e5a71b 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -27,7 +27,7 @@ #include <common.h> #include <asm/emif.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> #include <asm/utils.h> @@ -209,7 +209,8 @@ void emif_update_timings(u32 base, const struct emif_regs *regs) writel(regs->temp_alert_config, &emif->emif_temp_alert_config); writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - if (omap_revision() >= OMAP5430_ES1_0) { + if ((omap_revision() >= OMAP5430_ES1_0) || + (omap_revision() == DRA752_ES1_0)) { writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); } else if (omap_revision() >= OMAP4460_ES1_0) { @@ -263,6 +264,18 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs) __udelay(130); } +static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + config_data_eye_leveling_samples(base); + + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + writel(regs->sdram_config, &emif->emif_sdram_config); +} + static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -273,6 +286,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) * defined, contents of mode Registers must be fully initialized. * H/W takes care of this initialization */ + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); writel(regs->sdram_config_init, &emif->emif_sdram_config); writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); @@ -290,7 +304,10 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); - ddr3_leveling(base, regs); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); } #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -1078,7 +1095,10 @@ static void do_sdram_init(u32 base) if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { set_lpmode_selfrefresh(base); emif_reset_phy(base); - ddr3_leveling(base, regs); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); } /* Write to the shadow registers */ diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 1645120de..5df116edb 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -84,7 +84,7 @@ u32 cortex_rev(void) return rev; } -void omap_rev_string(void) +static void omap_rev_string(void) { u32 omap_rev = omap_revision(); u32 soc_variant = (omap_rev & 0xF0000000) >> 28; @@ -111,42 +111,6 @@ void __weak srcomp_enable(void) { } -static void save_omap_boot_params(void) -{ - u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - u8 boot_device; - u32 dev_desc, dev_data; - - if ((rom_params < NON_SECURE_SRAM_START) || - (rom_params > NON_SECURE_SRAM_END)) - return; - - /* - * rom_params can be type casted to omap_boot_parameters and - * used. But it not correct to assume that romcode structure - * encoding would be same as u-boot. So use the defined offsets. - */ - gd->arch.omap_boot_params.omap_bootdevice = boot_device = - *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); - - gd->arch.omap_boot_params.ch_flags = - *((u8 *)(rom_params + CH_FLAGS_OFFSET)); - - if ((boot_device >= MMC_BOOT_DEVICES_START) && - (boot_device <= MMC_BOOT_DEVICES_END)) { - if ((omap_hw_init_context() == - OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { - gd->arch.omap_boot_params.omap_bootmode = - *((u8 *)(rom_params + BOOT_MODE_OFFSET)); - } else { - dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); - dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); - gd->arch.omap_boot_params.omap_bootmode = - *((u32 *)(dev_data + BOOT_MODE_OFFSET)); - } - } -} - #ifdef CONFIG_ARCH_CPU_INIT /* * SOC specific cpu init @@ -202,8 +166,6 @@ void s_init(void) #endif prcm_init(); #ifdef CONFIG_SPL_BUILD - timer_init(); - /* For regular u-boot sdram_init() is called from dram_init() */ sdram_init(); #endif diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 507f6873e..5926a5a81 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -35,6 +35,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> +#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index e6e5f7893..a68f1d145 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -17,6 +17,7 @@ #include <common.h> #include <asm/omap_common.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> /* * Define Master code if there are multiple masters on the I2C_SR bus. @@ -57,7 +58,7 @@ * omap_vc_init() - Initialization for Voltage controller * @speed_khz: I2C buspeed in KHz */ -void omap_vc_init(u16 speed_khz) +static void omap_vc_init(u16 speed_khz) { u32 val; u32 sys_clk_khz, cycles_hi, cycles_low; @@ -137,3 +138,14 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) /* All good.. */ return 0; } + +void sri2c_init(void) +{ + static int sri2c = 1; + + if (sri2c) { + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + sri2c = 0; + } + return; +} diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 09c51f62a..81cc85978 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -27,7 +27,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/clocks_omap3.h> #include <asm/arch/mem.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 06a2fc8c2..b97cad436 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -29,7 +29,7 @@ #include <asm/arch/omap.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_gpio.h> #include <asm/io.h> @@ -219,6 +219,9 @@ struct pmic_data twl6030_4430es1 = { .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct pmic_data twl6030 = { @@ -226,6 +229,9 @@ struct pmic_data twl6030 = { .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct pmic_data tps62361 = { @@ -233,7 +239,10 @@ struct pmic_data tps62361 = { .step = 10000, /* 10 mV represented in uV */ .start_code = 0, .gpio = TPS62361_VSEL0_GPIO, - .gpio_en = 1 + .gpio_en = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct vcores_data omap4430_volts_es1 = { diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c index 7225a301b..7e71ca0a2 100644 --- a/arch/arm/cpu/armv7/omap4/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -301,6 +301,8 @@ struct omap_sys_ctrl_regs const omap4_ctrl = { .control_ldosram_iva_voltage_ctrl = 0x4A002320, .control_ldosram_mpu_voltage_ctrl = 0x4A002324, .control_ldosram_core_voltage_ctrl = 0x4A002328, + .control_usbotghs_ctrl = 0x4A00233C, + .control_padconf_core_base = 0x4A100000, .control_pbiaslite = 0x4A100600, .control_lpddr2io1_0 = 0x4A100638, .control_lpddr2io1_1 = 0x4A10063C, @@ -312,4 +314,5 @@ struct omap_sys_ctrl_regs const omap4_ctrl = { .control_lpddr2io2_3 = 0x4A100654, .control_efuse_1 = 0x4A100700, .control_efuse_2 = 0x4A100704, + .control_padconf_wkup_base = 0x4A31E000, }; diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index ce00e2c3c..6ff8dbb4e 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -30,6 +30,7 @@ COBJS += emif.o COBJS += sdram.o COBJS += prcm-regs.o COBJS += hw_data.o +COBJS += abb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c new file mode 100644 index 000000000..92470becc --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/abb.c @@ -0,0 +1,67 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP5 family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> + +/* + * Setup LDOVBB for OMAP5. + * On OMAP5+ some ABB settings are fused. They are handled + * in the following way: + * + * 1. corresponding EFUSE register contains ABB enable bit + * and VSET value + * 2. If ABB enable bit is set to 1, than ABB should be + * enabled, otherwise ABB should be disabled + * 3. If ABB is enabled, than VSET value should be copied + * to corresponding MUX control register + */ +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + u32 vset; + + /* + * ABB parameters must be properly fused + * otherwise ABB should be disabled + */ + vset = readl(fuse); + if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK)) + return -1; + + /* prepare VSET value for LDOVBB mux register */ + vset &= OMAP5_ABB_FUSE_VSET_MASK; + vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1; + vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1; + vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK; + + /* setup LDOVBB using fused value */ + clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset); + + return 0; +} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 604fa42b1..56cf1f8c6 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -26,10 +26,11 @@ * MA 02111-1307 USA */ #include <common.h> +#include <palmas.h> #include <asm/arch/omap.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_gpio.h> #include <asm/io.h> #include <asm/emif.h> @@ -99,14 +100,13 @@ static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { }; static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { - {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ - {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ + {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ }; static const struct dpll_params @@ -132,15 +132,14 @@ static const struct dpll_params }; static const struct dpll_params - core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = { - {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */ - {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */ - {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */ + core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = { + {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */ + {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */ + {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */ + {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */ + {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */ - {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */ + {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */ }; static const struct dpll_params @@ -186,14 +185,13 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { }; static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { - {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ + {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ + {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */ + {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ - {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */ + {10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ }; static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { @@ -206,6 +204,16 @@ static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ }; +static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = { + {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + /* ABE M & N values with sys_clk as source */ static const struct dpll_params abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { @@ -223,26 +231,36 @@ static const struct dpll_params abe_dpll_params_32k_196608khz = { 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 }; +/* ABE M & N values with sysclk2(22.5792 MHz) as input */ +static const struct dpll_params + abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = { + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ - {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ }; -static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = { - {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ +static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = { + {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ - {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ + {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ }; struct dplls omap5_dplls_es1 = { @@ -275,10 +293,12 @@ struct dplls omap5_dplls_es2 = { struct dplls dra7xx_dplls = { .mpu = mpu_dpll_params_1ghz, - .core = core_dpll_params_2128mhz_ddr532_dra7xx, + .core = core_dpll_params_2128mhz_dra7xx, .per = per_dpll_params_768mhz_dra7xx, + .abe = abe_dpll_params_sysclk2_361267khz, + .iva = iva_dpll_params_2330mhz_dra7xx, .usb = usb_dpll_params_1920mhz, - .ddr = ddr_dpll_params_1066mhz, + .ddr = ddr_dpll_params_2128mhz, }; struct pmic_data palmas = { @@ -289,6 +309,22 @@ struct pmic_data palmas = { * Offset code 0 switches OFF the SMPS */ .start_code = 6, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, +}; + +struct pmic_data tps659038 = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, + .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR, + .pmic_bus_init = gpi2c_init, + .pmic_write = palmas_i2c_write_u8, }; struct vcores_data omap5430_volts = { @@ -319,6 +355,38 @@ struct vcores_data omap5430_volts_es2 = { .mm.pmic = &palmas, }; +struct vcores_data dra752_volts = { + .mpu.value = VDD_MPU_DRA752, + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU, + .mpu.pmic = &tps659038, + + .eve.value = VDD_EVE_DRA752, + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE, + .eve.pmic = &tps659038, + + .gpu.value = VDD_GPU_DRA752, + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU, + .gpu.pmic = &tps659038, + + .core.value = VDD_CORE_DRA752, + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .core.addr = TPS659038_REG_ADDR_SMPS7_CORE, + .core.pmic = &tps659038, + + .iva.value = VDD_IVA_DRA752, + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA, + .iva.pmic = &tps659038, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -383,12 +451,6 @@ void enable_basic_clocks(void) clk_modules_explicit_en_essential, 1); - /* Select 384Mhz for GPU as its the POR for ES1.0 */ - setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_HYD_GCLK_MASK); - setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_CORE_GCLK_MASK); - /* Enable SCRM OPT clocks for PER and CORE dpll */ setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, OPTFCLKEN_SCRM_PER_MASK); @@ -540,6 +602,17 @@ const struct ctrl_ioregs ioregs_omap5432_es2 = { .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, }; +const struct ctrl_ioregs ioregs_dra7xx_es1 = { + .ctrl_ddrch = 0x40404040, + .ctrl_lpddr2ch = 0x40404040, + .ctrl_ddr3ch = 0x80808080, + .ctrl_ddrio_0 = 0xbae8c631, + .ctrl_ddrio_1 = 0xb46318d8, + .ctrl_ddrio_2 = 0x84210000, + .ctrl_emif_sdram_config_ext = 0xb2c00000, + .ctrl_ddr_ctrl_ext_0 = 0xA2000000, +}; + void hw_data_init(void) { u32 omap_rev = omap_revision(); @@ -565,7 +638,7 @@ void hw_data_init(void) case DRA752_ES1_0: *prcm = &dra7xx_prcm; *dplls_data = &dra7xx_dplls; - *omap_vcores = &omap5430_volts_es2; + *omap_vcores = &dra752_volts; *ctrl = &dra7xx_ctrl; break; @@ -582,14 +655,16 @@ void get_ioregs(const struct ctrl_ioregs **regs) case OMAP5430_ES1_0: case OMAP5430_ES2_0: *regs = &ioregs_omap5430; - break; + break; case OMAP5432_ES1_0: *regs = &ioregs_omap5432_es1; - break; + break; case OMAP5432_ES2_0: - case DRA752_ES1_0: *regs = &ioregs_omap5432_es2; - break; + break; + case DRA752_ES1_0: + *regs = &ioregs_dra7xx_es1; + break; default: printf("\n INVALID OMAP REVISION "); diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index e192fea0e..daf124e99 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -32,7 +32,7 @@ #include <asm/armv7.h> #include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/sizes.h> #include <asm/utils.h> #include <asm/arch/gpio.h> @@ -100,16 +100,21 @@ static void io_settings_ddr3(void) writel(ioregs->ctrl_emif_sdram_config_ext, (*ctrl)->control_emif2_sdram_config_ext); - /* Disable DLL select */ - io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) + if (is_omap54xx()) { + /* Disable DLL select */ + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) & 0xFFEFFFFF); - writel(io_settings, - (*ctrl)->control_port_emif1_sdram_config); + writel(io_settings, + (*ctrl)->control_port_emif1_sdram_config); - io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) & 0xFFEFFFFF); - writel(io_settings, - (*ctrl)->control_port_emif2_sdram_config); + writel(io_settings, + (*ctrl)->control_port_emif2_sdram_config); + } else { + writel(ioregs->ctrl_ddr_ctrl_ext_0, + (*ctrl)->control_ddr_control_ext_0); + } } /* @@ -201,6 +206,9 @@ void srcomp_enable(void) u32 sysclk_ind = get_sys_clk_index(); u32 omap_rev = omap_revision(); + if (!is_omap54xx()) + return; + mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; div_factor = srcomp_parameters[sysclk_ind].divide_factor; diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index e9f6a3265..e839ff5fe 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -298,6 +298,7 @@ struct prcm_regs const omap5_es1_prcm = { .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, .prm_rstctrl = 0x4ae07b00, .prm_rstst = 0x4ae07b04, + .prm_rsttime = 0x4ae07b08, .prm_vc_val_bypass = 0x4ae07ba0, .prm_vc_cfg_i2c_mode = 0x4ae07bb4, .prm_vc_cfg_i2c_clk = 0x4ae07bb8, @@ -307,10 +308,16 @@ struct prcm_regs const omap5_es1_prcm = { .prm_sldo_mpu_ctrl = 0x4ae07bd0, .prm_sldo_mm_setup = 0x4ae07bd4, .prm_sldo_mm_ctrl = 0x4ae07bd8, + + /* SCRM stuff, used by some boards */ + .scrm_auxclk0 = 0x4ae0a310, + .scrm_auxclk1 = 0x4ae0a314, }; struct omap_sys_ctrl_regs const omap5_ctrl = { .control_status = 0x4A002134, + .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4, + .control_padconf_core_base = 0x4A002800, .control_paconf_global = 0x4A002DA0, .control_paconf_mode = 0x4A002DA4, .control_smart1io_padconf_0 = 0x4A002DA8, @@ -358,6 +365,8 @@ struct omap_sys_ctrl_regs const omap5_ctrl = { .control_port_emif2_sdram_config = 0x4AE0C118, .control_emif1_sdram_config_ext = 0x4AE0C144, .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C318, + .control_padconf_wkup_base = 0x4AE0C800, .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, .control_padconf_mode = 0x4AE0CDA8, @@ -434,6 +443,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_srcomp_east_side = 0x4A002E7C, .control_srcomp_west_side = 0x4A002E80, .control_srcomp_code_latch = 0x4A002E84, + .control_ddr_control_ext_0 = 0x4A002E88, .control_padconf_core_base = 0x4A003400, .control_port_emif1_sdram_config = 0x4AE0C110, .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, @@ -709,6 +719,9 @@ struct prcm_regs const omap5_es2_prcm = { .cm_l3init_fsusb_clkctrl = 0x4a0096d0, .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, + /* prm irqstatus regs */ + .prm_irqstatus_mpu_2 = 0x4ae06014, + /* l4 wkup regs */ .cm_abe_pll_ref_clksel = 0x4ae0610c, .cm_sys_clksel = 0x4ae06110, @@ -740,6 +753,12 @@ struct prcm_regs const omap5_es2_prcm = { .prm_sldo_mpu_ctrl = 0x4ae07cd0, .prm_sldo_mm_setup = 0x4ae07cd4, .prm_sldo_mm_ctrl = 0x4ae07cd8, + .prm_abbldo_mpu_setup = 0x4ae07cdc, + .prm_abbldo_mpu_ctrl = 0x4ae07ce0, + + /* SCRM stuff, used by some boards */ + .scrm_auxclk0 = 0x4ae0a310, + .scrm_auxclk1 = 0x4ae0a314, }; struct prcm_regs const dra7xx_prcm = { @@ -941,6 +960,7 @@ struct prcm_regs const dra7xx_prcm = { /* l4 wkup regs */ .cm_abe_pll_ref_clksel = 0x4ae0610c, .cm_sys_clksel = 0x4ae06110, + .cm_abe_pll_sys_clksel = 0x4ae06118, .cm_wkup_clkstctrl = 0x4ae07800, .cm_wkup_l4wkup_clkctrl = 0x4ae07820, .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 6b461e484..1b445a61e 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -108,6 +108,7 @@ const struct emif_regs emif_regs_266_mhz_2cs = { const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { .sdram_config_init = 0x61851B32, .sdram_config = 0x61851B32, + .sdram_config2 = 0x0, .ref_ctrl = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, @@ -131,6 +132,7 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { .sdram_config_init = 0x61851B32, .sdram_config = 0x61851B32, + .sdram_config2 = 0x0, .ref_ctrl = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, @@ -151,6 +153,54 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { .emif_rd_wr_exec_thresh = 0x40000305 }; +const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851ab2, + .sdram_config = 0x61851ab2, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0E20400A, + .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_3 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_4 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0020400A, + .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_3 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_4 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_5 = 0x009D009D, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, @@ -159,11 +209,39 @@ const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .is_ma_present = 0x1 }; -const struct dmm_lisa_map_regs lisa_map_512M_x_1 = { +/* + * DRA752 EVM board has 1.5 GB of memory + * EMIF1 --> 2Gb * 2 = 512MB + * EMIF2 --> 2Gb * 4 = 1GB + * so mapping 1GB interleaved and 512MB non-interleaved + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x80640300, + .dmm_lisa_map_2 = 0xC0500220, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM EMIF1 ONLY CONFIGURATION + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, - .dmm_lisa_map_2 = 0x0, - .dmm_lisa_map_3 = 0x80500100, + .dmm_lisa_map_2 = 0x80500100, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM EMIF2 ONLY CONFIGURATION + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x80600200, + .dmm_lisa_map_3 = 0xFF020100, .is_ma_present = 0x1 }; @@ -180,9 +258,20 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) *regs = &emif_regs_532_mhz_2cs_es2; break; case OMAP5432_ES2_0: + *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + break; case DRA752_ES1_0: + switch (emif_nr) { + case 1: + *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; + break; + case 2: + *regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1; + break; + } + break; default: - *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; } } @@ -201,7 +290,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs break; case DRA752_ES1_0: default: - *dmm_lisa_regs = &lisa_map_512M_x_1; + *dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2; } } @@ -252,7 +341,8 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000000, 0x00000000, 0x00000000, - 0x00000077 + 0x00000077, + 0x0 }; const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { @@ -274,7 +364,8 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000000, 0x00000000, 0x00000000, - 0x00000057 + 0x00000057, + 0x0 }; const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { @@ -296,7 +387,56 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000000, 0x00000000, 0x00000000, - 0x00000057 + 0x00000057, + 0x0 +}; + +const u32 +dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x009E009E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x0, + 0x600020, + 0x40010080, + 0x8102040 +}; + +const u32 +dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x009D009D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x0, + 0x600020, + 0x40010080, + 0x8102040 }; const struct lpddr2_mr_regs mr_regs = { @@ -307,7 +447,7 @@ const struct lpddr2_mr_regs mr_regs = { .mr16 = MR16_REF_FULL_ARRAY }; -static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) +static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs) { switch (omap_revision()) { case OMAP5430_ES1_0: @@ -318,7 +458,14 @@ static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) *regs = ddr3_ext_phy_ctrl_const_base_es1; break; case OMAP5432_ES2_0: + *regs = ddr3_ext_phy_ctrl_const_base_es2; + break; case DRA752_ES1_0: + if (emif_nr == 1) + *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1; + else + *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2; + break; default: *regs = ddr3_ext_phy_ctrl_const_base_es2; @@ -334,9 +481,12 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; + u32 emif_nr; const u32 *ext_phy_ctrl_const_regs; u32 i = 0; + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); @@ -353,7 +503,7 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) * external phy 6-24 registers do not change with * ddr frequency */ - emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs); + emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs); for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++); diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index 17053995b..0c38bd0d2 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -26,9 +26,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)libs5p-common.o COBJS-y += cpu_info.o +ifndef CONFIG_SPL_BUILD COBJS-y += timer.o COBJS-y += sromc.o COBJS-$(CONFIG_PWM) += pwm.o +endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index e9e57e645..8e9cb1911 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -94,10 +94,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -167,80 +163,6 @@ reset: /*------------------------------------------------------------------------------*/ -#ifndef CONFIG_SPL_BUILD -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ -ENTRY(relocate_code) - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop - -relocate_done: - - bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start -ENDPROC(relocate_code) - -#endif - ENTRY(c_runtime_cpu_setup) /* * If I-cache is enabled invalidate it diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk index b02e8af6e..fd3c29f62 100644 --- a/arch/arm/cpu/ixp/config.mk +++ b/arch/arm/cpu/ixp/config.mk @@ -31,10 +31,6 @@ PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100 PLATFORM_LDFLAGS += -EB USE_PRIVATE_LIBGCC = yes -# -fdata-sections triggers "section .bss overlaps section .rel.dyn" linker error -PLATFORM_RELFLAGS += -ffunction-sections -LDFLAGS_u-boot += --gc-sections - # ========================================================================= # # Supply options according to compiler version diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 69ef8aa61..46cba0cf7 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -114,10 +114,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -257,79 +253,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 553589ca6..54bafda32 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -31,6 +31,7 @@ SECTIONS . = ALIGN(4); .text : { + *(.__image_copy_start) arch/arm/cpu/ixp/start.o(.text*) *(.text*) } @@ -54,17 +55,23 @@ SECTIONS . = ALIGN(4); - __image_copy_end = .; + .image_copy_end : + { + *(.__image_copy_end) + } + + .rel_dyn_start : + { + *(.__rel_dyn_start) + } .rel.dyn : { - __rel_dyn_start = .; *(.rel*) - __rel_dyn_end = .; } - .dynsym : { - __dynsym_start = .; - *(.dynsym) + .rel_dyn_end : + { + *(.__rel_dyn_end) } _end = .; @@ -88,6 +95,7 @@ SECTIONS KEEP(*(.__bss_end)); } + /DISCARD/ : { *(.dynsym) } /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk index 0bbe295a2..ea558593b 100644 --- a/arch/arm/cpu/pxa/config.mk +++ b/arch/arm/cpu/pxa/config.mk @@ -24,7 +24,7 @@ PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float -PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale +PLATFORM_CPPFLAGS += -mcpu=xscale # ========================================================================= # # Supply options according to compiler version diff --git a/arch/arm/cpu/pxa/pxa2xx.c b/arch/arm/cpu/pxa/pxa2xx.c index 0c186101e..f07dc6782 100644 --- a/arch/arm/cpu/pxa/pxa2xx.c +++ b/arch/arm/cpu/pxa/pxa2xx.c @@ -244,7 +244,7 @@ void pxa_clock_setup(void) { writel(CONFIG_SYS_CKEN, CKEN); writel(CONFIG_SYS_CCCR, CCCR); - asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(2)); + asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b)); /* enable the 32Khz oscillator for RTC and PowerManager */ writel(OSCC_OON, OSCC); diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index ada91a66c..2e623b108 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -118,10 +118,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -171,94 +167,24 @@ reset: bl _main /*------------------------------------------------------------------------------*/ -#ifndef CONFIG_SPL_BUILD -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - -/* Disable the Dcache RAM lock for stack now */ -#ifdef CONFIG_CPU_PXA25X - mov r12, lr - bl cpu_init_crit - mov lr, r12 -#endif - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: -#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_CPU_PXA25X /* - * fix .rel.dyn relocations + * Unlock (actually, disable) the cache now that board_init_f + * is done. We could do this earlier but we would need to add + * a new C runtime hook, whereas c_runtime_cpu_setup already + * exists. + * As this routine is just a call to cpu_init_crit, let us + * tail-optimize and do a simple branch here. */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - + b cpu_init_crit +#else bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - #endif - .globl c_runtime_cpu_setup -c_runtime_cpu_setup: - - bx lr - /* ************************************************************************* * @@ -282,10 +208,9 @@ cpu_init_crit: * disable MMU stuff and caches */ mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) + bic r0, r0, #0x00003300 @ clear bits 13:12, 9:8 (--VI --RS) bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) orr r0, r0, #0x00000002 @ set bit 2 (A) Align - orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache mcr p15, 0, r0, c1, c0, 0 mov pc, lr /* back to my caller */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 7361aa268..78183fc19 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -80,10 +80,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -140,79 +136,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - bx lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 8a2eafd6a..30d5a9021 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -90,10 +90,6 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start -.globl _image_copy_end_ofs -_image_copy_end_ofs: - .word __image_copy_end - _start - .globl _bss_end_ofs _bss_end_ofs: .word __bss_end - _start @@ -144,79 +140,6 @@ reset: /*------------------------------------------------------------------------------*/ -/* - * void relocate_code(addr_moni) - * - * This function relocates the monitor code. - */ - .globl relocate_code -relocate_code: - mov r6, r0 /* save addr of destination */ - - adr r0, _start - subs r9, r6, r0 /* r9 <- relocation offset */ - beq relocate_done /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _image_copy_end_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r10-r11} /* copy from source address [r0] */ - stmia r1!, {r10-r11} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -relocate_done: - - mov pc, lr - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - .globl c_runtime_cpu_setup c_runtime_cpu_setup: diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c index 9b77b2b82..9e6d51dd1 100644 --- a/arch/arm/cpu/tegra-common/ap.c +++ b/arch/arm/cpu/tegra-common/ap.c @@ -72,6 +72,7 @@ int tegra_get_chip_sku(void) switch (chip_id) { case CHIPID_TEGRA20: switch (sku_id) { + case SKU_ID_T20_7: case SKU_ID_T20: return TEGRA_SOC_T20; case SKU_ID_T25SE: @@ -92,6 +93,7 @@ int tegra_get_chip_sku(void) case CHIPID_TEGRA114: switch (sku_id) { case SKU_ID_T114_ENG: + case SKU_ID_T114_1: return TEGRA_SOC_T114; } break; @@ -107,6 +109,10 @@ static void enable_scu(void) struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; u32 reg; + /* Only enable the SCU on T20/T25 */ + if (tegra_get_chip() != CHIPID_TEGRA20) + return; + /* If SCU already setup/enabled, return */ if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) return; diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c index 9156d009b..268fb912b 100644 --- a/arch/arm/cpu/tegra-common/clock.c +++ b/arch/arm/cpu/tegra-common/clock.c @@ -321,17 +321,17 @@ unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, unsigned effective_rate; int mux_bits, divider_bits, source; int divider; + int xdiv = 0; /* work out the source clock and set it */ source = get_periph_clock_source(periph_id, parent, &mux_bits, ÷r_bits); + divider = find_best_divider(divider_bits, pll_rate[parent], + rate, &xdiv); if (extra_div) - divider = find_best_divider(divider_bits, pll_rate[parent], - rate, extra_div); - else - divider = clk_get_divider(divider_bits, pll_rate[parent], - rate); + *extra_div = xdiv; + assert(divider >= 0); if (adjust_periph_pll(periph_id, source, mux_bits, divider)) return -1U; diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds index 1408f03b2..b6ed25f7d 100644 --- a/arch/arm/cpu/u-boot-spl.lds +++ b/arch/arm/cpu/u-boot-spl.lds @@ -58,11 +58,6 @@ SECTIONS __rel_dyn_end = .; } - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - _end = .; .bss __rel_dyn_start (OVERLAY) : { @@ -72,6 +67,7 @@ SECTIONS __bss_end = .; } + /DISCARD/ : { *(.dynsym) } /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index d9bbee3b2..3037885b1 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -33,7 +33,7 @@ SECTIONS . = ALIGN(4); .text : { - __image_copy_start = .; + *(.__image_copy_start) CPUDIR/start.o (.text*) *(.text*) } @@ -57,17 +57,23 @@ SECTIONS . = ALIGN(4); - __image_copy_end = .; + .image_copy_end : + { + *(.__image_copy_end) + } + + .rel_dyn_start : + { + *(.__rel_dyn_start) + } .rel.dyn : { - __rel_dyn_start = .; *(.rel*) - __rel_dyn_end = .; } - .dynsym : { - __dynsym_start = .; - *(.dynsym) + .rel_dyn_end : + { + *(.__rel_dyn_end) } _end = .; @@ -101,6 +107,7 @@ SECTIONS KEEP(*(.__bss_end)); } + /DISCARD/ : { *(.dynsym) } /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index df4b231cf..cee4fe82c 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -169,4 +169,37 @@ #address-cells = <1>; #size-cells = <1>; }; + + mmc@12200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + }; + + mmc@12210000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + }; + + mmc@12220000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + }; + + mmc@12230000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos5250-dwmmc"; + reg = <0x12230000 0x1000>; + interrupts = <0 78 0>; + }; + }; diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 7e3bb9c99..db1515964 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -29,8 +29,8 @@ * at 0x40304000(EMU base) so that our code works for both EMU and GP */ #ifdef CONFIG_AM33XX -#define NON_SECURE_SRAM_START 0x40304000 -#define NON_SECURE_SRAM_END 0x4030E000 +#define NON_SECURE_SRAM_START 0x402F0400 +#define NON_SECURE_SRAM_END 0x40310000 #elif defined(CONFIG_TI814X) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index c913b5f31..307ac2824 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -30,7 +30,9 @@ int print_cpuinfo(void); extern struct ctrl_stat *cstat; u32 get_device_type(void); +void save_omap_boot_params(void); void setup_clocks_for_console(void); +void mpu_pll_config_val(int mpull_m); void ddr_pll_config(unsigned int ddrpll_M); void sdelay(unsigned long); @@ -40,4 +42,7 @@ void gpmc_init(void); void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size); void omap_nand_switch_ecc(uint32_t, uint32_t); + +void rtc32k_enable(void); +void uart_soft_reset(void); #endif diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index 8282f4619..584393572 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -35,5 +35,6 @@ void at91_seriald_hw_init(void); void at91_spi0_hw_init(unsigned long cs_mask); void at91_spi1_hw_init(unsigned long cs_mask); void at91_uhp_hw_init(void); +void at91_lcd_hw_init(void); #endif /* AT91_COMMON_H */ diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/include/asm/arch-at91/at91_dbu.h index 342929353..9a640a5b0 100644 --- a/arch/arm/include/asm/arch-at91/at91_dbu.h +++ b/arch/arm/include/asm/arch-at91/at91_dbu.h @@ -38,4 +38,8 @@ typedef struct at91_dbu { #define AT91_DBU_CID_ARCH_9xx 0x01900000 #define AT91_DBU_CID_ARCH_9XExx 0x02900000 +#define AT91_DBU_CIDR_MASK 0x1f +#define AT91_DBU_CIDR 0x40 +#define AT91_DBU_EXID 0x44 + #endif diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 086cb9b34..66075b480 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -55,7 +55,16 @@ typedef struct at91_pmc { u32 reserved5[21]; u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */ u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */ +#ifdef CONFIG_SAMA5D3 + u32 reserved6[8]; + u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */ + u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */ + u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */ + u32 pcr; /* 0x10c Periperial Control Register */ + u32 ocr; /* 0x110 Oscillator Calibration Register */ +#else u32 reserved8[5]; +#endif } at91_pmc_t; #endif /* end not assembly */ @@ -82,6 +91,16 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_CSS_PLLB 0x00000003 #define AT91_PMC_MCKR_CSS_MASK 0x00000003 +#ifdef CONFIG_SAMA5D3 +#define AT91_PMC_MCKR_PRES_1 0x00000000 +#define AT91_PMC_MCKR_PRES_2 0x00000010 +#define AT91_PMC_MCKR_PRES_4 0x00000020 +#define AT91_PMC_MCKR_PRES_8 0x00000030 +#define AT91_PMC_MCKR_PRES_16 0x00000040 +#define AT91_PMC_MCKR_PRES_32 0x00000050 +#define AT91_PMC_MCKR_PRES_64 0x00000060 +#define AT91_PMC_MCKR_PRES_MASK 0x00000070 +#else #define AT91_PMC_MCKR_PRES_1 0x00000000 #define AT91_PMC_MCKR_PRES_2 0x00000004 #define AT91_PMC_MCKR_PRES_4 0x00000008 @@ -90,6 +109,7 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_PRES_32 0x00000014 #define AT91_PMC_MCKR_PRES_64 0x00000018 #define AT91_PMC_MCKR_PRES_MASK 0x0000001C +#endif #ifdef CONFIG_AT91RM9200 #define AT91_PMC_MCKR_MDIV_1 0x00000000 @@ -100,6 +120,9 @@ typedef struct at91_pmc { #else #define AT91_PMC_MCKR_MDIV_1 0x00000000 #define AT91_PMC_MCKR_MDIV_2 0x00000100 +#ifdef CONFIG_SAMA5D3 +#define AT91_PMC_MCKR_MDIV_3 0x00000300 +#endif #define AT91_PMC_MCKR_MDIV_4 0x00000200 #define AT91_PMC_MCKR_MDIV_MASK 0x00000300 #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h index b9a93b0c8..6e0bebd1b 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h @@ -23,7 +23,7 @@ #include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) #include <asm/arch/at91sam9g45_matrix.h> -#elif defined(CONFIG_AT91SAM9X5) +#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) #include <asm/arch/at91sam9x5_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index b7d1932f4..85e42f582 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -1,10 +1,10 @@ /* * Chip-specific header file for the AT91SAM9x5 family * - * Copyright (C) 2012 Atmel Corporation. + * Copyright (C) 2012-2013 Atmel Corporation. * * Definitions for the SoC: - * AT91SAM9x5 + * AT91SAM9x5 & AT91SAM9N12 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,10 +22,12 @@ #define ATMEL_ID_SYS 1 /* System Controller Interrupt */ #define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */ #define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */ -#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD), only for AT91SAM9X5 */ +#define ATMEL_ID_FUSE 4 /* FUSE Controller, only for AT91SAM9N12 */ #define ATMEL_ID_USART0 5 /* USART 0 */ #define ATMEL_ID_USART1 6 /* USART 1 */ #define ATMEL_ID_USART2 7 /* USART 2 */ +#define ATMEL_ID_USART3 8 /* USART 3 */ #define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */ #define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */ #define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */ @@ -46,6 +48,7 @@ #define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */ #define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */ #define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */ +#define ATMEL_ID_TRNG 30 /* True Random Number Generator */ #define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */ /* @@ -85,6 +88,7 @@ /* * System Peripherals */ +#define ATMEL_BASE_FUSE 0xffffdc00 #define ATMEL_BASE_MATRIX 0xffffde00 #define ATMEL_BASE_PMECC 0xffffe000 #define ATMEL_BASE_PMERRLOC 0xffffe600 @@ -111,10 +115,15 @@ */ #define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ #define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */ + +#ifdef CONFIG_AT91SAM9N12 +#define ATMEL_BASE_OHCI 0x00500000 /* USB Host controller */ +#else /* AT91SAM9X5 */ #define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */ #define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ #define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ #define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ +#endif /* 9x5 series chip id definitions */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 @@ -140,7 +149,11 @@ /* * Cpu Name */ +#ifdef CONFIG_AT91SAM9N12 +#define ATMEL_CPU_NAME "AT91SAM9N12" +#else /* AT91SAM9X5 */ #define ATMEL_CPU_NAME get_cpu_name() +#endif /* * Other misc defines diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h index d6ce6fad5..0d3306944 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h @@ -1,10 +1,10 @@ /* * Matrix-centric header file for the AT91SAM9X5 family * - * Copyright (C) 2012 Atmel Corporation. + * Copyright (C) 2012-2013 Atmel Corporation. * * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9X5 preliminary datasheet. + * Based on AT91SAM9X5 & AT91SAM9N12 preliminary datasheet. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,14 +17,25 @@ #ifndef __ASSEMBLY__ +/* AT91SAM9N12 Matrix definition is a subset of AT91SAM9X5. */ struct at91_matrix { u32 mcfg[16]; u32 scfg[16]; u32 pras[16][2]; u32 mrcr; /* 0x100 Master Remap Control */ - u32 filler[7]; + u32 filler[5]; +#ifdef CONFIG_AT91SAM9X5 + u32 filler1[2]; +#endif + /* EBI Chip Select Assignment Register + * 0x118: AT91SAM9N12 + * 0x120: AT91SAM9X5 + */ u32 ebicsa; u32 filler4[47]; +#ifdef CONFIG_AT91SAM9N12 + u32 filler5[2]; +#endif u32 wpmr; u32 wpsr; }; diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h index d4852a38c..04b0f8322 100644 --- a/arch/arm/include/asm/arch-at91/clk.h +++ b/arch/arm/include/asm/arch-at91/clk.h @@ -95,4 +95,5 @@ static inline unsigned long get_mci_clk_rate(void) } int at91_clock_init(unsigned long main_clock); +void at91_periph_clk_enable(int id); #endif /* __ASM_ARM_ARCH_CLK_H__ */ diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index 4c4ee703a..b04641e01 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -37,12 +37,14 @@ # include <asm/arch/at91sam9rl.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) # include <asm/arch/at91sam9g45.h> -#elif defined(CONFIG_AT91SAM9X5) +#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) # include <asm/arch/at91sam9x5.h> #elif defined(CONFIG_AT91CAP9) # include <asm/arch/at91cap9.h> #elif defined(CONFIG_AT91X40) # include <asm/arch/at91x40.h> +#elif defined(CONFIG_SAMA5D3) +# include <asm/arch/sama5d3.h> #else # error "Unsupported AT91 processor" #endif diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h new file mode 100644 index 000000000..883b932da --- /dev/null +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -0,0 +1,212 @@ +/* + * Chip-specific header file for the SAMA5D3 family + * + * (C) 2012 - 2013 Atmel Corporation. + * Bo Shen <voice.shen@atmel.com> + * + * Definitions for the SoC: + * SAMA5D3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SAMA5D3_H +#define SAMA5D3_H + +/* + * defines to be used in other places + */ +#define CONFIG_ARMV7 /* ARM A5 Core */ +#define CONFIG_AT91FAMILY /* it's a member of AT91 */ + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */ +#define ATMEL_ID_DBGU 2 /* Debug Unit Interrupt */ +#define ATMEL_ID_PIT 3 /* Periodic Interval Timer Interrupt */ +#define ATMEL_ID_WDT 4 /* Watchdog timer Interrupt */ +#define ATMEL_ID_SMC 5 /* Multi-bit ECC Interrupt */ +#define ATMEL_ID_PIOA 6 /* Parallel I/O Controller A */ +#define ATMEL_ID_PIOB 7 /* Parallel I/O Controller B */ +#define ATMEL_ID_PIOC 8 /* Parallel I/O Controller C */ +#define ATMEL_ID_PIOD 9 /* Parallel I/O Controller D */ +#define ATMEL_ID_PIOE 10 /* Parallel I/O Controller E */ +#define ATMEL_ID_SMD 11 /* SMD Soft Modem */ +#define ATMEL_ID_USART0 12 /* USART 0 */ +#define ATMEL_ID_USART1 13 /* USART 1 */ +#define ATMEL_ID_USART2 14 /* USART 2 */ +#define ATMEL_ID_USART3 15 /* USART 3 */ +#define ATMEL_ID_UART0 16 +#define ATMEL_ID_UART1 17 +#define ATMEL_ID_TWI0 18 /* Two-Wire Interface 0 */ +#define ATMEL_ID_TWI1 19 /* Two-Wire Interface 1 */ +#define ATMEL_ID_TWI2 20 /* Two-Wire Interface 2 */ +#define ATMEL_ID_MCI0 21 /* High Speed Multimedia Card Interface 0 */ +#define ATMEL_ID_MCI1 22 /* */ +#define ATMEL_ID_MCI2 23 /* */ +#define ATMEL_ID_SPI0 24 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 25 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_TC0 26 /* */ +#define ATMEL_ID_TC1 27 /* */ +#define ATMEL_ID_PWMC 28 /* Pulse Width Modulation Controller */ +#define ATMEL_ID_TSC 29 /* Touch Screen ADC Controller */ +#define ATMEL_ID_DMA0 30 /* DMA Controller */ +#define ATMEL_ID_DMA1 31 /* DMA Controller */ +#define ATMEL_ID_UHPHS 32 /* USB Host High Speed */ +#define ATMEL_ID_UDPHS 33 /* USB Device High Speed */ +#define ATMEL_ID_GMAC 34 +#define ATMEL_ID_EMAC 35 /* Ethernet MAC */ +#define ATMEL_ID_LCDC 36 /* LCD Controller */ +#define ATMEL_ID_ISI 37 /* Image Sensor Interface */ +#define ATMEL_ID_SSC0 38 /* Synchronous Serial Controller 0 */ +#define ATMEL_ID_SSC1 39 /* Synchronous Serial Controller 1 */ +#define ATMEL_ID_CAN0 40 +#define ATMEL_ID_CAN1 41 +#define ATMEL_ID_SHA 42 +#define ATMEL_ID_AES 43 +#define ATMEL_ID_TDES 44 +#define ATMEL_ID_TRNG 45 +#define ATMEL_ID_ARM 46 +#define ATMEL_ID_IRQ0 47 /* Advanced Interrupt Controller */ +#define ATMEL_ID_FUSE 48 +#define ATMEL_ID_MPDDRC 49 + +/* sama5d3 series chip id definitions */ +#define ARCH_ID_SAMA5D3 0x8a5c07c0 +#define ARCH_EXID_SAMA5D31 0x00444300 +#define ARCH_EXID_SAMA5D33 0x00414300 +#define ARCH_EXID_SAMA5D34 0x00414301 +#define ARCH_EXID_SAMA5D35 0x00584300 + +#define cpu_is_sama5d3() (get_chip_id() == ARCH_ID_SAMA5D3) +#define cpu_is_sama5d31() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D31)) +#define cpu_is_sama5d33() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D33)) +#define cpu_is_sama5d34() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D34)) +#define cpu_is_sama5d35() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D35)) + +/* + * User Peripherals physical base addresses. + */ +#define ATMEL_BASE_MCI0 0xf0000000 +#define ATMEL_BASE_SPI0 0xf0004000 +#define ATMEL_BASE_SSC0 0xf000C000 +#define ATMEL_BASE_TC2 0xf0010000 +#define ATMEL_BASE_TWI0 0xf0014000 +#define ATMEL_BASE_TWI1 0xf0018000 +#define ATMEL_BASE_USART0 0xf001c000 +#define ATMEL_BASE_USART1 0xf0020000 +#define ATMEL_BASE_UART0 0xf0024000 +#define ATMEL_BASE_GMAC 0xf0028000 +#define ATMEL_BASE_PWMC 0xf002c000 +#define ATMEL_BASE_LCDC 0xf0030000 +#define ATMEL_BASE_ISI 0xf0034000 +#define ATMEL_BASE_SFR 0xf0038000 +/* Reserved: 0xf003c000 - 0xf8000000 */ +#define ATMEL_BASE_MCI1 0xf8000000 +#define ATMEL_BASE_MCI2 0xf8004000 +#define ATMEL_BASE_SPI1 0xf8008000 +#define ATMEL_BASE_SSC1 0xf800c000 +#define ATMEL_BASE_CAN1 0xf8010000 +#define ATMEL_BASE_TC3 0xf8014000 +#define ATMEL_BASE_TSADC 0xf8018000 +#define ATMEL_BASE_TWI2 0xf801c000 +#define ATMEL_BASE_USART2 0xf8020000 +#define ATMEL_BASE_USART3 0xf8024000 +#define ATMEL_BASE_UART1 0xf8028000 +#define ATMEL_BASE_EMAC 0xf802c000 +#define ATMEL_BASE_UDHPS 0xf8030000 +#define ATMEL_BASE_SHA 0xf8034000 +#define ATMEL_BASE_AES 0xf8038000 +#define ATMEL_BASE_TDES 0xf803c000 +#define ATMEL_BASE_TRNG 0xf8040000 +/* Reserved: 0xf804400 - 0xffffc00 */ + +/* + * System Peripherals physical base addresses. + */ +#define ATMEL_BASE_SYS 0xffffc000 +#define ATMEL_BASE_SMC 0xffffc000 +#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070) +#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500) +#define ATMEL_BASE_FUSE 0xffffe400 +#define ATMEL_BASE_DMAC0 0xffffe600 +#define ATMEL_BASE_DMAC1 0xffffe800 +#define ATMEL_BASE_MPDDRC 0xffffea00 +#define ATMEL_BASE_MATRIX 0xffffec00 +#define ATMEL_BASE_DBGU 0xffffee00 +#define ATMEL_BASE_AIC 0xfffff000 +#define ATMEL_BASE_PIOA 0xfffff200 +#define ATMEL_BASE_PIOB 0xfffff400 +#define ATMEL_BASE_PIOC 0xfffff600 +#define ATMEL_BASE_PIOD 0xfffff800 +#define ATMEL_BASE_PIOE 0xfffffa00 +#define ATMEL_BASE_PMC 0xfffffc00 +#define ATMEL_BASE_RSTC 0xfffffe00 +#define ATMEL_BASE_SHDWN 0xfffffe10 +#define ATMEL_BASE_PIT 0xfffffe30 +#define ATMEL_BASE_WDT 0xfffffe40 +#define ATMEL_BASE_SCKCR 0xfffffe50 +#define ATMEL_BASE_GPBR 0xfffffe60 +#define ATMEL_BASE_RTC 0xfffffeb0 +/* Reserved: 0xfffffee0 - 0xffffffff */ + +/* + * Internal Memory. + */ +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM 0x00200000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM0 0x00300000 /* Internal SRAM base address */ +#define ATMEL_BASE_SRAM1 0x00310000 /* Internal SRAM base address */ +#define ATMEL_BASE_SMD 0x00400000 /* Internal ROM base address */ +#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ +#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ +#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ +#define ATMEL_BASE_AXI 0x00800000 /* Video Decoder Controller */ +#define ATMEL_BASE_DAP 0x00900000 /* Video Decoder Controller */ + +/* + * External memory + */ +#define ATMEL_BASE_CS0 0x10000000 +#define ATMEL_BASE_DDRCS 0x20000000 +#define ATMEL_BASE_CS1 0x40000000 +#define ATMEL_BASE_CS2 0x50000000 +#define ATMEL_BASE_CS3 0x60000000 + +/* + * Other misc defines + */ +#define ATMEL_PIO_PORTS 5 +#define CPU_HAS_PIO3 +#define PIO_SCDR_DIV 0x3fff + +/* + * PMECC table in ROM + */ +#define ATMEL_PMECC_INDEX_OFFSET_512 0x10000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000 +#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000 +#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000 + +/* + * SAMA5D3 specific prototypes + */ +#ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); +unsigned int has_emac(void); +unsigned int has_gmac(void); +unsigned int has_lcdc(void); +char *get_cpu_name(void); +#endif + +#endif diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h new file mode 100644 index 000000000..eb53eba97 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2012 Atmel Corporation. + * + * Static Memory Controllers (SMC) - System peripherals registers. + * Based on SAMA5D3 datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SAMA5D3_SMC_H +#define SAMA5D3_SMC_H + +#ifdef __ASSEMBLY__ +#define AT91_ASM_SMC_SETUP0 (ATMEL_BASE_SMC + 0x600) +#define AT91_ASM_SMC_PULSE0 (ATMEL_BASE_SMC + 0x604) +#define AT91_ASM_SMC_CYCLE0 (ATMEL_BASE_SMC + 0x608) +#define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C) +#else +struct at91_cs { + u32 reserved[96]; + u32 setup; /* 0x600 SMC Setup Register */ + u32 pulse; /* 0x604 SMC Pulse Register */ + u32 cycle; /* 0x608 SMC Cycle Register */ + u32 timings; /* 0x60C SMC Cycle Register */ + u32 mode; /* 0x610 SMC Mode Register */ +}; + +struct at91_smc { + struct at91_cs cs[4]; +}; +#endif /* __ASSEMBLY__ */ + +#define AT91_SMC_SETUP_NWE(x) (x & 0x3f) +#define AT91_SMC_SETUP_NCS_WR(x) ((x & 0x3f) << 8) +#define AT91_SMC_SETUP_NRD(x) ((x & 0x3f) << 16) +#define AT91_SMC_SETUP_NCS_RD(x) ((x & 0x3f) << 24) + +#define AT91_SMC_PULSE_NWE(x) (x & 0x3f) +#define AT91_SMC_PULSE_NCS_WR(x) ((x & 0x3f) << 8) +#define AT91_SMC_PULSE_NRD(x) ((x & 0x3f) << 16) +#define AT91_SMC_PULSE_NCS_RD(x) ((x & 0x3f) << 24) + +#define AT91_SMC_CYCLE_NWE(x) (x & 0x1ff) +#define AT91_SMC_CYCLE_NRD(x) ((x & 0x1ff) << 16) + +#define AT91_SMC_TIMINGS_TCLR(x) (x & 0xf) +#define AT91_SMC_TIMINGS_TADL(x) ((x & 0xf) << 4) +#define AT91_SMC_TIMINGS_TAR(x) ((x & 0xf) << 8) +#define AT91_SMC_TIMINGS_OCMS(x) ((x & 0x1) << 12) +#define AT91_SMC_TIMINGS_TRR(x) ((x & 0xf) << 16) +#define AT91_SMC_TIMINGS_TWB(x) ((x & 0xf) << 24) +#define AT91_SMC_TIMINGS_RBNSEL(x) ((x & 0xf) << 28) +#define AT91_SMC_TIMINGS_NFSEL(x) ((x & 0x1) << 31) + +#define AT91_SMC_MODE_RM_NCS 0x00000000 +#define AT91_SMC_MODE_RM_NRD 0x00000001 +#define AT91_SMC_MODE_WM_NCS 0x00000000 +#define AT91_SMC_MODE_WM_NWE 0x00000002 + +#define AT91_SMC_MODE_EXNW_DISABLE 0x00000000 +#define AT91_SMC_MODE_EXNW_FROZEN 0x00000020 +#define AT91_SMC_MODE_EXNW_READY 0x00000030 + +#define AT91_SMC_MODE_BAT 0x00000100 +#define AT91_SMC_MODE_DBW_8 0x00000000 +#define AT91_SMC_MODE_DBW_16 0x00001000 +#define AT91_SMC_MODE_DBW_32 0x00002000 +#define AT91_SMC_MODE_TDF_CYCLE(x) ((x & 0xf) << 16) +#define AT91_SMC_MODE_TDF 0x00100000 +#define AT91_SMC_MODE_PMEN 0x01000000 +#define AT91_SMC_MODE_PS_4 0x00000000 +#define AT91_SMC_MODE_PS_8 0x10000000 +#define AT91_SMC_MODE_PS_16 0x20000000 +#define AT91_SMC_MODE_PS_32 0x30000000 + +#endif diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h index a851f1f50..beaf0d601 100644 --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h @@ -22,8 +22,14 @@ #define __ASM_ARCH_PINMUX_DEFS_H #include <asm/arch/davinci_misc.h> +#include <config.h> -/* SPI pin muxer settings */ +/* SPI0 pin muxer settings */ +extern const struct pinmux_config spi0_pins_base[3]; +extern const struct pinmux_config spi0_pins_scs0[1]; +extern const struct pinmux_config spi0_pins_ena[1]; + +/* SPI1 pin muxer settings */ extern const struct pinmux_config spi1_pins_base[3]; extern const struct pinmux_config spi1_pins_scs0[1]; @@ -35,6 +41,7 @@ extern const struct pinmux_config uart2_pins_rtscts[2]; /* EMAC pin muxer settings*/ extern const struct pinmux_config emac_pins_rmii[7]; +extern const struct pinmux_config emac_pins_rmii_clk_source[1]; extern const struct pinmux_config emac_pins_mii[15]; extern const struct pinmux_config emac_pins_mdio[2]; @@ -43,13 +50,19 @@ extern const struct pinmux_config i2c0_pins[2]; extern const struct pinmux_config i2c1_pins[2]; /* EMIFA pin muxer settings */ +extern const struct pinmux_config emifa_pins[40]; +extern const struct pinmux_config emifa_pins_cs0[1]; extern const struct pinmux_config emifa_pins_cs2[1]; extern const struct pinmux_config emifa_pins_cs3[1]; extern const struct pinmux_config emifa_pins_cs4[1]; extern const struct pinmux_config emifa_pins_nand[12]; extern const struct pinmux_config emifa_pins_nor[43]; +/* USB pin mux setting */ +extern const struct pinmux_config usb_pins[1]; + /* MMC pin muxer settings */ +extern const struct pinmux_config mmc0_pins_8bit[10]; extern const struct pinmux_config mmc0_pins[6]; #endif diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index f76e4897e..36b98c83e 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -38,6 +38,7 @@ #define EXYNOS4_CLOCK_BASE 0x10030000 #define EXYNOS4_SYSTIMER_BASE 0x10050000 #define EXYNOS4_WATCHDOG_BASE 0x10060000 +#define EXYNOS4_TZPC_BASE 0x10110000 #define EXYNOS4_MIU_BASE 0x10600000 #define EXYNOS4_DMC0_BASE 0x10400000 #define EXYNOS4_DMC1_BASE 0x10410000 @@ -74,6 +75,7 @@ #define EXYNOS4X12_CLOCK_BASE 0x10030000 #define EXYNOS4X12_SYSTIMER_BASE 0x10050000 #define EXYNOS4X12_WATCHDOG_BASE 0x10060000 +#define EXYNOS4X12_TZPC_BASE 0x10110000 #define EXYNOS4X12_DMC0_BASE 0x10600000 #define EXYNOS4X12_DMC1_BASE 0x10610000 #define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000 @@ -107,6 +109,7 @@ #define EXYNOS5_POWER_BASE 0x10040000 #define EXYNOS5_SWRESET 0x10040400 #define EXYNOS5_SYSREG_BASE 0x10050000 +#define EXYNOS5_TZPC_BASE 0x10100000 #define EXYNOS5_WATCHDOG_BASE 0x101D0000 #define EXYNOS5_ACE_SFR_BASE 0x10830000 #define EXYNOS5_DMC_PHY0_BASE 0x10C00000 @@ -233,6 +236,7 @@ SAMSUNG_BASE(watchdog, WATCHDOG_BASE) SAMSUNG_BASE(power, POWER_BASE) SAMSUNG_BASE(spi, SPI_BASE) SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) +SAMSUNG_BASE(tzpc, TZPC_BASE) #endif #endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h index 8acdf9b72..3b147b86e 100644 --- a/arch/arm/include/asm/arch-exynos/dwmmc.h +++ b/arch/arm/include/asm/arch-exynos/dwmmc.h @@ -27,10 +27,7 @@ #define DWMCI_SET_DRV_CLK(x) ((x) << 16) #define DWMCI_SET_DIV_RATIO(x) ((x) << 24) -int exynos_dwmci_init(u32 regbase, int bus_width, int index); - -static inline unsigned int exynos_dwmmc_init(int index, int bus_width) -{ - unsigned int base = samsung_get_base_mmc() + (0x10000 * index); - return exynos_dwmci_init(base, bus_width, index); -} +#ifdef CONFIG_OF_CONTROL +int exynos_dwmmc_init(const void *blob); +#endif +int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel); diff --git a/arch/arm/include/asm/arch-exynos/tmu.h b/arch/arm/include/asm/arch-exynos/tmu.h index 7e0158efb..cad35694f 100644 --- a/arch/arm/include/asm/arch-exynos/tmu.h +++ b/arch/arm/include/asm/arch-exynos/tmu.h @@ -21,38 +21,30 @@ #define __ASM_ARCH_TMU_H struct exynos5_tmu_reg { - unsigned triminfo; - unsigned rsvd1; - unsigned rsvd2; - unsigned rsvd3; - unsigned rsvd4; - unsigned triminfo_control; - unsigned rsvd5; - unsigned rsvd6; - unsigned tmu_control; - unsigned rsvd7; - unsigned tmu_status; - unsigned sampling_internal; - unsigned counter_value0; - unsigned counter_value1; - unsigned rsvd8; - unsigned rsvd9; - unsigned current_temp; - unsigned rsvd10; - unsigned rsvd11; - unsigned rsvd12; - unsigned threshold_temp_rise; - unsigned threshold_temp_fall; - unsigned rsvd13; - unsigned rsvd14; - unsigned past_temp3_0; - unsigned past_temp7_4; - unsigned past_temp11_8; - unsigned past_temp15_12; - unsigned inten; - unsigned intstat; - unsigned intclear; - unsigned rsvd15; - unsigned emul_con; + u32 triminfo; + u32 rsvd1[4]; + u32 triminfo_control; + u32 rsvd5[2]; + u32 tmu_control; + u32 rsvd7; + u32 tmu_status; + u32 sampling_internal; + u32 counter_value0; + u32 counter_value1; + u32 rsvd8[2]; + u32 current_temp; + u32 rsvd10[3]; + u32 threshold_temp_rise; + u32 threshold_temp_fall; + u32 rsvd13[2]; + u32 past_temp3_0; + u32 past_temp7_4; + u32 past_temp11_8; + u32 past_temp15_12; + u32 inten; + u32 intstat; + u32 intclear; + u32 rsvd15; + u32 emul_con; }; #endif /* __ASM_ARCH_TMU_H */ diff --git a/arch/arm/include/asm/arch-exynos/tzpc.h b/arch/arm/include/asm/arch-exynos/tzpc.h index c5eb4b1cc..4d9c3a32f 100644 --- a/arch/arm/include/asm/arch-exynos/tzpc.h +++ b/arch/arm/include/asm/arch-exynos/tzpc.h @@ -47,6 +47,26 @@ struct exynos_tzpc { unsigned int pcellid2; unsigned int pcellid3; }; + +#define EXYNOS4_NR_TZPC_BANKS 6 +#define EXYNOS5_NR_TZPC_BANKS 10 + +/* TZPC : Register Offsets */ +#define TZPC_BASE_OFFSET 0x10000 + +/* + * TZPC Register Value : + * R0SIZE: 0x0 : Size of secured ram + */ +#define R0SIZE 0x0 + +/* + * TZPC Decode Protection Register Value : + * DECPROTXSET: 0xFF : Set Decode region to non-secure + */ +#define DECPROTXSET 0xFF +void tzpc_init(void); + #endif #endif diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h deleted file mode 100644 index 8522335bf..000000000 --- a/arch/arm/include/asm/arch-omap24xx/bits.h +++ /dev/null @@ -1,48 +0,0 @@ -/* bits.h - * Copyright (c) 2004 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/clocks.h b/arch/arm/include/asm/arch-omap24xx/clocks.h deleted file mode 100644 index 2e92569a9..000000000 --- a/arch/arm/include/asm/arch-omap24xx/clocks.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_CLOCKS_H_ -#define _OMAP24XX_CLOCKS_H_ - -#define COMMIT_DIVIDERS 0x1 - -#define MODE_BYPASS_FAST 0x2 -#define APLL_LOCK 0xc -#ifdef CONFIG_APTIX -#define DPLL_LOCK 0x1 /* stay in bypass mode */ -#else -#define DPLL_LOCK 0x3 /* DPLL lock */ -#endif - -/****************************************************************************; -; PRCM Scheme II -; -; Enable clocks and DPLL for: -; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 -; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] -; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] -; DSPI=100 6 CM_CLKSEL_DSP[6:5] -; DSP_S bypass CM_CLKSEL_DSP[7] -; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] -; IVAF=100 auto -; IVAI auto -; IVA_MPU auto -; IVA_S bypass CM_CLKSEL_DSP[13] -; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] -; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=100 auto -; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] -; L4=100Mhz 6 -; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define II_DPLL_OUT_X2 0x2 /* x2 core out */ -#define II_MPU_DIV 0x2 /* mpu = core/2 */ -#define II_DSP_DIV 0x343 /* dsp & iva divider */ -#define II_GFX_DIV 0x2 -#define II_BUS_DIV 0x04601026 -#define II_DPLL_300 0x01832100 - -/****************************************************************************; -; PRCM Scheme III -; -; Enable clocks and DPLL for: -; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 -; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] -; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] -; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] -; DSP_S ACTIVATED CM_CLKSEL_DSP[7] -; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] -; IVAF=88.67 auto -; IVAI auto -; IVA_MPU auto -; IVA_S ACTIVATED CM_CLKSEL_DSP[13] -; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: -; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=88.67 auto -; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] -; L4=66.5Mhz /8 -; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define III_DPLL_OUT_X2 0x2 /* x2 core out */ -#define III_MPU_DIV 0x2 /* mpu = core/2 */ -#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ -#define III_GFX_DIV 0x2 -#define III_BUS_DIV 0x08301044 -#define III_DPLL_266 0x01885500 - -/* set defaults for boot up */ -#ifdef PRCM_CONFIG_II -# define DPLL_OUT II_DPLL_OUT_X2 -# define MPU_DIV II_MPU_DIV -# define DSP_DIV II_DSP_DIV -# define GFX_DIV II_GFX_DIV -# define BUS_DIV II_BUS_DIV -# define DPLL_VAL II_DPLL_300 -#elif PRCM_CONFIG_III -# define DPLL_OUT III_DPLL_OUT_X2 -# define MPU_DIV III_MPU_DIV -# define DSP_DIV III_DSP_DIV -# define GFX_DIV III_GFX_DIV -# define BUS_DIV III_BUS_DIV -# define DPLL_VAL III_DPLL_266 -#endif - -/* lock delay time out */ -#define LDELAY 12000000 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h deleted file mode 100644 index 6f645192a..000000000 --- a/arch/arm/include/asm/arch-omap24xx/i2c.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_I2C_H_ -#define _OMAP24XX_I2C_H_ - -#define I2C_BASE1 0x48070000 -#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ - -#define I2C_DEFAULT_BASE I2C_BASE1 - -struct i2c { - unsigned short rev; /* 0x00 */ - unsigned short res1; - unsigned short ie; /* 0x04 */ - unsigned short res2; - unsigned short stat; /* 0x08 */ - unsigned short res3; - unsigned short iv; /* 0x0C */ - unsigned short res4; - unsigned short syss; /* 0x10 */ - unsigned short res4p1; - unsigned short buf; /* 0x14 */ - unsigned short res5; - unsigned short cnt; /* 0x18 */ - unsigned short res6; - unsigned short data; /* 0x1C */ - unsigned short res7; - unsigned short sysc; /* 0x20 */ - unsigned short res8; - unsigned short con; /* 0x24 */ - unsigned short res9; - unsigned short oa; /* 0x28 */ - unsigned short res10; - unsigned short sa; /* 0x2C */ - unsigned short res11; - unsigned short psc; /* 0x30 */ - unsigned short res12; - unsigned short scll; /* 0x34 */ - unsigned short res13; - unsigned short sclh; /* 0x38 */ - unsigned short res14; - unsigned short systest; /* 0x3c */ - unsigned short res15; -}; - -#define I2C_BUS_MAX 2 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h deleted file mode 100644 index 42e8ab2bc..000000000 --- a/arch/arm/include/asm/arch-omap24xx/mem.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_MEM_H_ -#define _OMAP24XX_MEM_H_ - -#define SDRC_CS0_OSET 0x0 -#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ - -#ifndef __ASSEMBLY__ -/* struct's for holding data tables for current boards, they are getting used - early in init when NO global access are there */ -struct sdrc_data_s { - u32 sdrc_sharing; - u32 sdrc_mdcfg_0_ddr; - u32 sdrc_mdcfg_0_sdr; - u32 sdrc_actim_ctrla_0; - u32 sdrc_actim_ctrlb_0; - u32 sdrc_rfr_ctrl; - u32 sdrc_mr_0_ddr; - u32 sdrc_mr_0_sdr; - u32 sdrc_dllab_ctrl; -} /*__attribute__ ((packed))*/; -typedef struct sdrc_data_s sdrc_data_t; - -typedef enum { - STACKED = 0, - IP_DDR = 1, - COMBO_DDR = 2, - IP_SDR = 3, -} mem_t; - -#endif - -/* Slower full frequency range default timings for x32 operation*/ -#define H4_2420_SDRC_SHARING 0x00000100 -#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ -#define H4_2420_SDRC_MR_0_SDR 0x00000031 -#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ -#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ -#define H4_2420_SDRC_MR_0_DDR 0x00000032 - -#define H4_2422_SDRC_SHARING 0x00004b00 -#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */ -#define H4_2422_SDRC_MR_0_DDR 0x00000032 - -/* ES1 work around timings */ -#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ -#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 -#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ - -/* optimized timings good for current shipping parts */ -#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 -#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e -#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ -#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ -#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 -#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 -#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/ -#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */ - -#ifdef PRCM_CONFIG_II -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#elif PRCM_CONFIG_III -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#endif - - -/* GPMC settings */ -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* else NOR */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01 -# define H4_24XX_GPMC_CONFIG3_0 0x00050502 -# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 -# define H4_24XX_GPMC_CONFIG3_1 0x00080802 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000003C2 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x00151501 -# define H4_24XX_GPMC_CONFIG3_0 0x00060602 -# define H4_24XX_GPMC_CONFIG4_0 0x10081008 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# define H4_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define H4_24XX_GPMC_CONFIG3_1 0x00080803 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000004C4 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif CONFIG_SYS_PRCM_III */ - -#endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h deleted file mode 100644 index 4fdb9c635..000000000 --- a/arch/arm/include/asm/arch-omap24xx/mux.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP2420_MUX_H_ -#define _OMAP2420_MUX_H_ - -#ifndef __ASSEMBLY__ -typedef unsigned char uint8; -typedef unsigned int uint32; - -void muxSetupSDRC(void); -void muxSetupGPMC(void); -void muxSetupUsb0(void); -void muxSetupUsbHost(void); -void muxSetupUart3(void); -void muxSetupI2C1(void); -void muxSetupUART1(void); -void muxSetupLCD(void); -void muxSetupCamera(void); -void muxSetupMMCSD(void) ; -void muxSetupTouchScreen(void) ; -void muxSetupHDQ(void); -#endif - -#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C) - -/* Pin Muxing registers used for HDQ (Smart battery) */ -#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115) - -/* Pin Muxing registers used for GPMC */ -#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088) -#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089) -#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A) -#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B) - -#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093) - -/* Pin Muxing registers used for SDRC */ -#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3) - -#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031) -#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032) -#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033) - -/* Pin Muxing registers used for Touch Screen (SPI) */ -#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF) -#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) -#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) -#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) -#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103) - -#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) - -/* Pin Muxing registers used for MMCSD */ -#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE) -#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3) -#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4) -#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5) -#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6) -#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7) -#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8) -#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9) -#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA) -#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB) -#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC) -#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD) - -#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031) - -/* Pin Muxing registers used for CAMERA */ -#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B) - -#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC) -#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB) -#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA) -#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9) -#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8) -#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7) -#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6) -#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5) -#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4) -#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3) -#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2) -#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1) -#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0) -#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF) - -/* Pin Muxing registers used for LCD */ -#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3) -#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4) -#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5) -#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6) -#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7) -#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8) -#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9) -#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA) -#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB) -#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC) -#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD) -#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE) -#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF) -#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0) -#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1) -#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2) -#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3) -#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4) -#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB) -#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC) -#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD) -#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE) - -/* Pin Muxing registers used for UART1 */ -#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) -#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) -#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) -#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) - -/* Pin Muxing registers used for I2C1 */ -#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111) -#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112) - -/* Pin Muxing registres used for USB0. */ -#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D) -#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E) -#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F) -#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120) -#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121) -#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) -#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) - -/* Pin Muxing registres used for USB1. */ -#define CONTROL_PADCONF_USB1_RCV (0x480000EB) -#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) - -/* Pin Muxing registers used for UART3/IRDA */ -#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) -#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) - -/* Pin Muxing registers used for GPIO */ -#define CONTROL_PADCONF_GPIO69 (0x480000ED) -#define CONTROL_PADCONF_GPIO70 (0x480000EE) -#define CONTROL_PADCONF_GPIO102 (0x48000116) -#define CONTROL_PADCONF_GPIO103 (0x48000117) -#define CONTROL_PADCONF_GPIO104 (0x48000118) -#define CONTROL_PADCONF_GPIO105 (0x48000119) - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h deleted file mode 100644 index 5724f5d4b..000000000 --- a/arch/arm/include/asm/arch-omap24xx/omap2420.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2420_SYS_H_ -#define _OMAP2420_SYS_H_ - -#include <asm/sizes.h> - -/* - * 2420 specific Section - */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 -/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* device type */ -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 - -/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) -#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) -#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) -#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) -#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) -#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) -#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) -#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) -#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) -#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) -#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) -#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) -#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) -#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) -#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) -#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) -# define BURSTCOMPLETE_GROUP7 BIT31 - -/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) - -/* - * H4 specific Section - */ - -/* - * The 2420's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0C000000 /* wifi board */ -#endif - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -/* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) -#endif /* endif CONFIG_2420H4 */ - -/* Common */ -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h deleted file mode 100644 index 53c231a5e..000000000 --- a/arch/arm/include/asm/arch-omap24xx/sys_info.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_SYS_INFO_H_ -#define _OMAP24XX_SYS_INFO_H_ - -typedef struct h4_system_data { - /* base board info */ - u32 base_b_rev; /* rev from base board i2c */ - /* cpu board info */ - u32 cpu_b_rev; /* rev from cpu board i2c */ - u32 cpu_b_mux; /* mux type on daughter board */ - u32 cpu_b_ddr_type; /* mem type */ - u32 cpu_b_ddr_speed; /* ddr speed rating */ - u32 cpu_b_switches; /* boot ctrl switch settings */ - /* cpu info */ - u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ - u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ -} h4_sys_data; - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module*/ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_2420 0x2420 -#define CPU_2422 0x2422 /* 2420 + 64M stacked */ -#define CPU_2423 0x2423 /* 2420 + 96M stacked */ - -#define CPU_2422_ES1 1 -#define CPU_2422_ES2 2 -#define CPU_2420_ES1 1 -#define CPU_2420_ES2 2 -#define CPU_2420_2422_ES1 1 - -#define CPU_2420_CHIPID 0x0B5D9000 -#define CPU_24XX_ID_MASK 0x0FFFF000 -#define CPU_242X_REV_MASK 0xF0000000 -#define CPU_242X_PID_MASK 0x000F0000 - -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 - -#define GPMC_MUXED 1 -#define GPMC_NONMUXED 0 - -#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ -#define TYPE_NOR 0x000 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h deleted file mode 100644 index 9d8e5b262..000000000 --- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_SYS_PROTO_H_ -#define _OMAP24XX_SYS_PROTO_H_ - -void prcm_init(void); -void memif_init(void); -void sdrc_init(void); -void do_sdrc_init(u32,u32); -void gpmc_init(void); - -void ether_init(void); -void watchdog_init(void); -void set_muxconf_regs(void); -void peripheral_enable(void); - -u32 get_cpu_type(void); -u32 get_cpu_rev(void); -u32 get_mem_type(void); -u32 get_sysboot_value(void); -u32 get_gpmc0_base(void); -u32 is_gpmc_muxed(void); -u32 get_gpmc0_type(void); -u32 get_gpmc0_width(void); -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); -u32 get_board_type(void); -void display_board_info(u32); -void update_mux(u32,u32); -u32 get_sdr_cs_size(u32 offset); - -u32 running_in_sdram(void); -u32 running_in_sram(void); -u32 running_in_flash(void); -u32 running_from_internal_boot(void); -u32 get_device_type(void); -#endif diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clock.h index bed0002ec..bed0002ec 100644 --- a/arch/arm/include/asm/arch-omap3/clocks.h +++ b/arch/arm/include/asm/arch-omap3/clock.h diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 2b5e9aeae..c57599a93 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -253,4 +253,11 @@ struct gpio { #define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 30 +#define OMAP_ABB_CLOCK_CYCLES 8 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) + #endif diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clock.h index ed7a1c8be..d14d8fb8a 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -34,25 +34,6 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE 0x4A004120 -#define CM_CLKMODE_DPLL_PER 0x4A008140 -#define CM_CLKMODE_DPLL_MPU 0x4A004160 -#define CM_CLKSEL_CORE 0x4A004100 - -/* DPLL register offsets */ -#define CM_CLKMODE_DPLL 0 -#define CM_IDLEST_DPLL 0x4 -#define CM_AUTOIDLE_DPLL 0x8 -#define CM_CLKSEL_DPLL 0xC -#define CM_DIV_M2_DPLL 0x10 -#define CM_DIV_M3_DPLL 0x14 -#define CM_DIV_M4_DPLL 0x18 -#define CM_DIV_M5_DPLL 0x1C -#define CM_DIV_M6_DPLL 0x20 -#define CM_DIV_M7_DPLL 0x24 - -#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ - /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) @@ -94,10 +75,8 @@ #define CM_CLKSEL_DCC_EN_SHIFT 22 #define CM_CLKSEL_DCC_EN_MASK (1 << 22) -#define OMAP4_DPLL_MAX_N 127 - /* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 /* CM_CLKSEL_CORE */ #define CLKSEL_CORE_SHIFT 0 @@ -181,9 +160,7 @@ #define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) /* Clock frequencies */ -#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -#define OMAP_32K_CLK_FREQ 32768 /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 @@ -234,14 +211,13 @@ #define ALTCLKSRC_MODE_ACTIVE 1 -/* Defines for DPLL setup */ -#define DPLL_LOCKED_FREQ_TOLERANCE_0 0 -#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500 -#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000 - #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + struct omap4_scrm_regs { u32 revision; /* 0x0000 */ u32 pad00[63]; diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index 3a0bfbf0c..311c6ff52 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -115,18 +115,6 @@ struct watchdog { #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 -#define SYSCLKDIV_1 (0x1 << 6) -#define SYSCLKDIV_2 (0x1 << 7) - -#define CLKSEL_GPT1 (0x1 << 0) - -#define EN_GPT1 (0x1 << 0) -#define EN_32KSYNC (0x1 << 2) - -#define ST_WDT2 (0x1 << 5) - -#define RESETDONE (0x1 << 0) - #define TCLR_ST (0x1 << 0) #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index e9a6ffeb8..66afd9249 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -47,14 +47,6 @@ #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END -/* CONTROL */ -#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) -#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000) -#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000) - -/* LPDDR2 IO regs */ -#define LPDDR2_IO_REGS_BASE 0x4A100638 - /* CONTROL_ID_CODE */ #define CONTROL_ID_CODE 0x4A002204 @@ -79,15 +71,9 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000) - /* GPMC */ #define OMAP44XX_GPMC_BASE 0x50000000 -/* SYSTEM CONTROL MODULE */ -#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 - /* * Hardware Register Details */ @@ -143,4 +129,12 @@ struct s32ktimer { #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + #endif diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index 039a1f260..e41346614 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -22,7 +22,7 @@ #define _SYS_PROTO_H_ #include <asm/arch/omap.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/io.h> #include <asm/omap_common.h> #include <asm/arch/mux_omap4.h> @@ -54,9 +54,11 @@ void cancel_out(u32 *num, u32 *den, u32 den_limit); void sdram_init(void); u32 omap_sdram_size(void); u32 cortex_rev(void); +void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); +void gpi2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clock.h index 68afa7669..4d2765d87 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -35,19 +35,6 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120) -#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140) -#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) -#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) - -/* DPLL register offsets */ -#define CM_CLKMODE_DPLL 0 -#define CM_IDLEST_DPLL 0x4 -#define CM_AUTOIDLE_DPLL 0x8 -#define CM_CLKSEL_DPLL 0xC - -#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ - /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) @@ -93,10 +80,8 @@ #define CM_CLKSEL_DCC_EN_SHIFT 22 #define CM_CLKSEL_DCC_EN_MASK (1 << 22) -#define OMAP4_DPLL_MAX_N 127 - /* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 /* CM_CLKSEL_CORE */ #define CLKSEL_CORE_SHIFT 0 @@ -113,6 +98,12 @@ #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1 +/* CM_CLKSEL_ABE_PLL_SYS */ +#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT 0 +#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK 1 +#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1 0 +#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2 1 + /* CM_BYPCLK_DPLL_IVA */ #define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0 #define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3 @@ -195,9 +186,7 @@ #define RSTTIME1_MASK (0x3ff << 0) /* Clock frequencies */ -#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -#define OMAP_32K_CLK_FREQ 32768 /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 @@ -229,9 +218,54 @@ #define VDD_MPU_ES2_LOW 880 #define VDD_MM_ES2_LOW 880 +/* TPS659038 Voltage settings in mv for OPP_NOMINAL */ +#define VDD_MPU_DRA752 1090 +#define VDD_EVE_DRA752 1060 +#define VDD_GPU_DRA752 1060 +#define VDD_CORE_DRA752 1030 +#define VDD_IVA_DRA752 1060 + +/* Efuse register offsets for DRA7xx platform */ +#define DRA752_EFUSE_BASE 0x4A002000 +#define DRA752_EFUSE_REGBITS 16 +/* STD_FUSE_OPP_VMIN_IVA_2 */ +#define STD_FUSE_OPP_VMIN_IVA_NOM (DRA752_EFUSE_BASE + 0x05CC) +/* STD_FUSE_OPP_VMIN_IVA_3 */ +#define STD_FUSE_OPP_VMIN_IVA_OD (DRA752_EFUSE_BASE + 0x05D0) +/* STD_FUSE_OPP_VMIN_IVA_4 */ +#define STD_FUSE_OPP_VMIN_IVA_HIGH (DRA752_EFUSE_BASE + 0x05D4) +/* STD_FUSE_OPP_VMIN_DSPEVE_2 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_NOM (DRA752_EFUSE_BASE + 0x05E0) +/* STD_FUSE_OPP_VMIN_DSPEVE_3 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_OD (DRA752_EFUSE_BASE + 0x05E4) +/* STD_FUSE_OPP_VMIN_DSPEVE_4 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH (DRA752_EFUSE_BASE + 0x05E8) +/* STD_FUSE_OPP_VMIN_CORE_2 */ +#define STD_FUSE_OPP_VMIN_CORE_NOM (DRA752_EFUSE_BASE + 0x05F4) +/* STD_FUSE_OPP_VMIN_GPU_2 */ +#define STD_FUSE_OPP_VMIN_GPU_NOM (DRA752_EFUSE_BASE + 0x1B08) +/* STD_FUSE_OPP_VMIN_GPU_3 */ +#define STD_FUSE_OPP_VMIN_GPU_OD (DRA752_EFUSE_BASE + 0x1B0C) +/* STD_FUSE_OPP_VMIN_GPU_4 */ +#define STD_FUSE_OPP_VMIN_GPU_HIGH (DRA752_EFUSE_BASE + 0x1B10) +/* STD_FUSE_OPP_VMIN_MPU_2 */ +#define STD_FUSE_OPP_VMIN_MPU_NOM (DRA752_EFUSE_BASE + 0x1B20) +/* STD_FUSE_OPP_VMIN_MPU_3 */ +#define STD_FUSE_OPP_VMIN_MPU_OD (DRA752_EFUSE_BASE + 0x1B24) +/* STD_FUSE_OPP_VMIN_MPU_4 */ +#define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28) + /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 +/* TPS659038 */ +#define TPS659038_I2C_SLAVE_ADDR 0x58 +#define TPS659038_REG_ADDR_SMPS12_MPU 0x23 +#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B +#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F +#define TPS659038_REG_ADDR_SMPS7_CORE 0x33 +#define TPS659038_REG_ADDR_SMPS8_IVA 0x37 + /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 #define TPS62361_REG_ADDR_SET0 0x0 @@ -261,4 +295,25 @@ * into microsec and passing the value. */ #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 + +#ifdef CONFIG_DRA7XX +#define V_OSCK 20000000 /* Clock output from T2 */ +#else +#define V_OSCK 19200000 /* Clock output from T2 */ +#endif + +#define V_SCLK V_OSCK + +/* AUXCLKx reg fields */ +#define AUXCLK_ENABLE_MASK (1 << 8) +#define AUXCLK_SRCSELECT_SHIFT 1 +#define AUXCLK_SRCSELECT_MASK (3 << 1) +#define AUXCLK_CLKDIV_SHIFT 16 +#define AUXCLK_CLKDIV_MASK (0xF << 16) + +#define AUXCLK_SRCSELECT_SYS_CLK 0 +#define AUXCLK_SRCSELECT_CORE_DPLL 1 +#define AUXCLK_SRCSELECT_PER_DPLL 2 +#define AUXCLK_SRCSELECT_ALTERNATE 3 + #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 044ab5581..4753f4624 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -119,18 +119,6 @@ struct watchdog { #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 -#define SYSCLKDIV_1 (0x1 << 6) -#define SYSCLKDIV_2 (0x1 << 7) - -#define CLKSEL_GPT1 (0x1 << 0) - -#define EN_GPT1 (0x1 << 0) -#define EN_32KSYNC (0x1 << 2) - -#define ST_WDT2 (0x1 << 5) - -#define RESETDONE (0x1 << 0) - #define TCLR_ST (0x1 << 0) #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index 55e9de604..5f2b0f9f5 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -28,11 +28,14 @@ #include <asm/types.h> +#define FSC (1 << 19) +#define SSC (0 << 19) + #define IEN (1 << 18) #define IDIS (0 << 18) -#define PTU (3 << 16) -#define PTD (1 << 16) +#define PTU (1 << 17) +#define PTD (0 << 17) #define PEN (1 << 16) #define PDIS (0 << 16) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 4f43a903d..817c1ff27 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -44,16 +44,15 @@ #define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START #define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END -/* CONTROL */ -#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) -#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800) -#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800) +/* CONTROL ID CODE */ +#define CONTROL_CORE_ID_CODE 0x4A002204 +#define CONTROL_WKUP_ID_CODE 0x4AE0C204 -/* LPDDR2 IO regs. To be verified */ -#define LPDDR2_IO_REGS_BASE 0x4A100638 - -/* CONTROL_ID_CODE */ -#define CONTROL_ID_CODE (CTRL_BASE + 0x204) +#ifdef CONFIG_DRA7XX +#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE +#else +#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE +#endif /* To be verified */ #define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F @@ -62,11 +61,6 @@ #define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F #define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F -/* STD_FUSE_PROD_ID_1 */ -#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) -#define PROD_ID_1_SILICON_TYPE_SHIFT 16 -#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16) - /* UART */ #define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) #define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000) @@ -80,15 +74,9 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000) -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000) - /* GPMC */ #define OMAP54XX_GPMC_BASE 0x50000000 -/* SYSTEM CONTROL MODULE */ -#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 - /* * Hardware Register Details */ @@ -118,9 +106,9 @@ /* CONTROL_EFUSE_2 */ #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 +#define SDCARD_BIAS_PWRDNZ (1 << 27) #define SDCARD_PWRDNZ (1 << 26) #define SDCARD_BIAS_HIZ_MODE (1 << 25) -#define SDCARD_BIAS_PWRDNZ (1 << 22) #define SDCARD_PBIASLITE_VMODE (1 << 21) #ifndef __ASSEMBLY__ @@ -181,26 +169,17 @@ struct s32ktimer { #define EFUSE_4 0x45145100 #endif /* __ASSEMBLY__ */ -/* - * Non-secure SRAM Addresses - * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE - * at 0x40304000(EMU base) so that our code works for both EMU and GP - */ +#ifdef CONFIG_DRA7XX +#define NON_SECURE_SRAM_START 0x40300000 +#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ +#else #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +#endif + /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 -/* Silicon revisions */ -#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF -#define OMAP4430_ES1_0 0x44300100 -#define OMAP4430_ES2_0 0x44300200 -#define OMAP4430_ES2_1 0x44300210 -#define OMAP4430_ES2_2 0x44300220 -#define OMAP4430_ES2_3 0x44300230 -#define OMAP4460_ES1_0 0x44600100 -#define OMAP4460_ES1_1 0x44600110 - /* CONTROL_SRCOMP_XXX_SIDE */ #define OVERRIDE_XS_SHIFT 30 #define OVERRIDE_XS_MASK (1 << 30) @@ -215,6 +194,19 @@ struct s32ktimer { #define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 #define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + +/* ABB efuse masks */ +#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24) +#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29) +#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) +#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0) + #ifndef __ASSEMBLY__ struct srcomp_params { s8 divide_factor; @@ -229,6 +221,7 @@ struct ctrl_ioregs { u32 ctrl_ddrio_1; u32 ctrl_ddrio_2; u32 ctrl_emif_sdram_config_ext; + u32 ctrl_ddr_ctrl_ext_0; }; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index b79161d79..0bb59d869 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -23,9 +23,9 @@ #include <asm/arch/omap.h> #include <asm/io.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; @@ -58,9 +58,11 @@ void cancel_out(u32 *num, u32 *den, u32 den_limit); void sdram_init(void); u32 omap_sdram_size(void); u32 cortex_rev(void); +void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); +void gpi2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h index 3e642e92f..5fe4838d9 100644 --- a/arch/arm/include/asm/arch-tegra/tegra.h +++ b/arch/arm/include/asm/arch-tegra/tegra.h @@ -72,6 +72,7 @@ struct timerus { /* These are the available SKUs (product types) for Tegra */ enum { + SKU_ID_T20_7 = 0x7, SKU_ID_T20 = 0x8, SKU_ID_T25SE = 0x14, SKU_ID_AP25 = 0x17, @@ -81,6 +82,7 @@ enum { SKU_ID_T33 = 0x80, SKU_ID_T30 = 0x81, /* Cardhu value */ SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */ + SKU_ID_T114_1 = 0x01, }; /* diff --git a/arch/arm/include/asm/bootm.h b/arch/arm/include/asm/bootm.h index db2ff94c6..2c4fa196e 100644 --- a/arch/arm/include/asm/bootm.h +++ b/arch/arm/include/asm/bootm.h @@ -1,4 +1,7 @@ -/* Copyright (C) 2011 +/* + * Copyright (c) 2013, Google Inc. + * + * Copyright (C) 2011 * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> * * This program is free software; you can redistribute it and/or modify @@ -19,8 +22,55 @@ #ifndef ARM_BOOTM_H #define ARM_BOOTM_H -#ifdef CONFIG_USB_DEVICE extern void udc_disconnect(void); + +#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ + defined(CONFIG_CMDLINE_TAG) || \ + defined(CONFIG_INITRD_TAG) || \ + defined(CONFIG_SERIAL_TAG) || \ + defined(CONFIG_REVISION_TAG) +# define BOOTM_ENABLE_TAGS 1 +#else +# define BOOTM_ENABLE_TAGS 0 +#endif + +#ifdef CONFIG_SETUP_MEMORY_TAGS +# define BOOTM_ENABLE_MEMORY_TAGS 1 +#else +# define BOOTM_ENABLE_MEMORY_TAGS 0 +#endif + +#ifdef CONFIG_CMDLINE_TAG + #define BOOTM_ENABLE_CMDLINE_TAG 1 +#else + #define BOOTM_ENABLE_CMDLINE_TAG 0 +#endif + +#ifdef CONFIG_INITRD_TAG + #define BOOTM_ENABLE_INITRD_TAG 1 +#else + #define BOOTM_ENABLE_INITRD_TAG 0 +#endif + +#ifdef CONFIG_SERIAL_TAG + #define BOOTM_ENABLE_SERIAL_TAG 1 +void get_board_serial(struct tag_serialnr *serialnr); +#else + #define BOOTM_ENABLE_SERIAL_TAG 0 +static inline void get_board_serial(struct tag_serialnr *serialnr) +{ +} +#endif + +#ifdef CONFIG_REVISION_TAG + #define BOOTM_ENABLE_REVISION_TAG 1 +u32 get_board_rev(void); +#else + #define BOOTM_ENABLE_REVISION_TAG 0 +static inline u32 get_board_rev(void) +{ + return 0; +} #endif #endif diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 5f11d7b72..1b94a99c5 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -581,7 +581,7 @@ (0xFF << EMIF_SYS_ADDR_SHIFT)) #define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5 -#define EMIF_EXT_PHY_CTRL_CONST_REG 0x13 +#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14 /* Reg mapping structure */ struct emif_reg_struct { @@ -855,13 +855,10 @@ struct dmm_lisa_map_regs { #define DPD_ENABLE 1 /* Maximum delay before Low Power Modes */ -#ifndef CONFIG_OMAP54XX -#define REG_CS_TIM 0xF -#else #define REG_CS_TIM 0x0 -#endif -#define REG_SR_TIM 0xF -#define REG_PD_TIM 0xF +#define REG_SR_TIM 0x0 +#define REG_PD_TIM 0x0 + /* EMIF_PWR_MGMT_CTRL register */ #define EMIF_PWR_MGMT_CTRL (\ @@ -1113,6 +1110,7 @@ struct emif_regs { u32 freq; u32 sdram_config_init; u32 sdram_config; + u32 sdram_config2; u32 ref_ctrl; u32 sdram_tim1; u32 sdram_tim2; diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index ee7b188d3..787e614ec 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -29,7 +29,7 @@ #include <common.h> -#define NUM_SYS_CLKS 8 +#define NUM_SYS_CLKS 7 struct prcm_regs { /* cm1.ckgen */ @@ -242,6 +242,8 @@ struct prcm_regs { u32 cm_l3init_fsusb_clkctrl; u32 cm_l3init_ocp2scp1_clkctrl; + u32 prm_irqstatus_mpu_2; + /* cm2.l4per */ u32 cm_l4per_clkstctrl; u32 cm_l4per_dynamicdep; @@ -301,6 +303,7 @@ struct prcm_regs { /* l4 wkup regs */ u32 cm_abe_pll_ref_clksel; u32 cm_sys_clksel; + u32 cm_abe_pll_sys_clksel; u32 cm_wkup_clkstctrl; u32 cm_wkup_l4wkup_clkctrl; u32 cm_wkup_wdtimer1_clkctrl; @@ -328,6 +331,8 @@ struct prcm_regs { u32 prm_sldo_mpu_ctrl; u32 prm_sldo_mm_setup; u32 prm_sldo_mm_ctrl; + u32 prm_abbldo_mpu_setup; + u32 prm_abbldo_mpu_ctrl; u32 cm_div_m4_dpll_core; u32 cm_div_m5_dpll_core; @@ -346,10 +351,15 @@ struct prcm_regs { u32 cm_l3init_usbphy_clkctrl; u32 cm_l4per_mcbsp4_clkctrl; u32 prm_vc_cfg_channel; + + /* SCRM stuff, used by some boards */ + u32 scrm_auxclk0; + u32 scrm_auxclk1; }; struct omap_sys_ctrl_regs { u32 control_status; + u32 control_std_fuse_opp_vdd_mpu_2; u32 control_core_mmr_lock1; u32 control_core_mmr_lock2; u32 control_core_mmr_lock3; @@ -362,6 +372,7 @@ struct omap_sys_ctrl_regs { u32 control_ldosram_iva_voltage_ctrl; u32 control_ldosram_mpu_voltage_ctrl; u32 control_ldosram_core_voltage_ctrl; + u32 control_usbotghs_ctrl; u32 control_padconf_core_base; u32 control_paconf_global; u32 control_paconf_mode; @@ -394,6 +405,7 @@ struct omap_sys_ctrl_regs { u32 control_ddrio_0; u32 control_ddrio_1; u32 control_ddrio_2; + u32 control_ddr_control_ext_0; u32 control_lpddr2io1_0; u32 control_lpddr2io1_1; u32 control_lpddr2io1_2; @@ -419,6 +431,7 @@ struct omap_sys_ctrl_regs { u32 control_port_emif2_sdram_config; u32 control_emif1_sdram_config_ext; u32 control_emif2_sdram_config_ext; + u32 control_wkup_ldovbb_mpu_voltage_ctrl; u32 control_smart1nopmio_padconf_0; u32 control_smart1nopmio_padconf_1; u32 control_padconf_mode; @@ -494,11 +507,25 @@ struct pmic_data { u32 start_code; unsigned gpio; int gpio_en; + u32 i2c_slave_addr; + void (*pmic_bus_init)(void); + int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data); +}; + +/** + * struct volts_efuse_data - efuse definition for voltage + * @reg: register address for efuse + * @reg_bits: Number of bits in a register address, mandatory. + */ +struct volts_efuse_data { + u32 reg; + u8 reg_bits; }; struct volts { u32 value; u32 addr; + struct volts_efuse_data efuse; struct pmic_data *pmic; }; @@ -506,6 +533,9 @@ struct vcores_data { struct volts mpu; struct volts core; struct volts mm; + struct volts gpu; + struct volts eve; + struct volts iva; }; extern struct prcm_regs const **prcm; @@ -545,9 +575,9 @@ void enable_non_essential_clocks(void); void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); - -/* Max value for DPLL multiplier M */ -#define OMAP_DPLL_MAX_N 127 +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp); +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); /* HW Init Context */ #define OMAP_INIT_CONTEXT_SPL 0 @@ -555,11 +585,32 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3 +/* ABB */ +#define OMAP_ABB_NOMINAL_OPP 0 +#define OMAP_ABB_FAST_OPP 1 +#define OMAP_ABB_SLOW_OPP 3 +#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK (0x1 << 0) +#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK (0x1 << 1) +#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK (0x1 << 2) +#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK (0x1 << 6) +#define OMAP_ABB_SETUP_SR2EN_MASK (0x1 << 0) +#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK (0x1 << 2) +#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK (0x1 << 1) +#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK (0xff << 8) + static inline u32 omap_revision(void) { extern u32 *const omap_si_rev; return *omap_si_rev; } + +#define OMAP54xx 0x54000000 + +static inline u8 is_omap54xx(void) +{ + extern u32 *const omap_si_rev; + return ((*omap_si_rev & 0xFF000000) == OMAP54xx); +} #endif /* diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index f16861ad2..c01eef3e6 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -54,8 +54,6 @@ int arch_early_init_r(void); int board_init(void); int dram_init (void); void dram_init_banksize (void); -void setup_serial_tag (struct tag **params); -void setup_revision_tag (struct tag **params); /* cpu/.../interrupt.c */ int arch_interrupt_init (void); diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 6ae161a51..9ecafb272 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -39,12 +39,14 @@ GLCOBJS += div0.o SOBJS-y += crt0.o ifndef CONFIG_SPL_BUILD +SOBJS-y += relocate.o ifndef CONFIG_SYS_GENERIC_BOARD COBJS-y += board.o endif -COBJS-y += bss.o +COBJS-y += sections.o COBJS-y += bootm.o +COBJS-$(CONFIG_OF_LIBFDT) += bootm-fdt.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c new file mode 100644 index 000000000..93888f8db --- /dev/null +++ b/arch/arm/lib/bootm-fdt.c @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2013, Google Inc. + * + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * - Added prep subcommand support + * - Reorganized source - modeled after powerpc version + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdt_support.h> + +DECLARE_GLOBAL_DATA_PTR; + +int arch_fixup_memory_node(void *blob) +{ + bd_t *bd = gd->bd; + int bank; + u64 start[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { + start[bank] = bd->bi_dram[bank].start; + size[bank] = bd->bi_dram[bank].size; + } + + return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); +} diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index f3b30c57a..1b6e0ace4 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -22,7 +22,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <common.h> @@ -37,13 +36,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) static struct tag *params; -#endif static ulong get_sp(void) { @@ -75,23 +68,6 @@ void arch_lmb_reserve(struct lmb *lmb) gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp); } -#ifdef CONFIG_OF_LIBFDT -static int fixup_memory_node(void *blob) -{ - bd_t *bd = gd->bd; - int bank; - u64 start[CONFIG_NR_DRAM_BANKS]; - u64 size[CONFIG_NR_DRAM_BANKS]; - - for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { - start[bank] = bd->bi_dram[bank].start; - size[bank] = bd->bi_dram[bank].size; - } - - return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); -} -#endif - static void announce_and_cleanup(void) { printf("\nStarting kernel ...\n\n"); @@ -109,11 +85,6 @@ static void announce_and_cleanup(void) cleanup_before_linux(); } -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) static void setup_start_tag (bd_t *bd) { params = (struct tag *)bd->bi_boot_params; @@ -127,9 +98,7 @@ static void setup_start_tag (bd_t *bd) params = tag_next (params); } -#endif -#ifdef CONFIG_SETUP_MEMORY_TAGS static void setup_memory_tags(bd_t *bd) { int i; @@ -144,9 +113,7 @@ static void setup_memory_tags(bd_t *bd) params = tag_next (params); } } -#endif -#ifdef CONFIG_CMDLINE_TAG static void setup_commandline_tag(bd_t *bd, char *commandline) { char *p; @@ -171,9 +138,7 @@ static void setup_commandline_tag(bd_t *bd, char *commandline) params = tag_next (params); } -#endif -#ifdef CONFIG_INITRD_TAG static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end) { /* an ATAG_INITRD node tells the kernel where the compressed @@ -187,14 +152,11 @@ static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end) params = tag_next (params); } -#endif -#ifdef CONFIG_SERIAL_TAG -void setup_serial_tag(struct tag **tmp) +static void setup_serial_tag(struct tag **tmp) { struct tag *params = *tmp; struct tag_serialnr serialnr; - void get_board_serial(struct tag_serialnr *serialnr); get_board_serial(&serialnr); params->hdr.tag = ATAG_SERIAL; @@ -204,13 +166,10 @@ void setup_serial_tag(struct tag **tmp) params = tag_next (params); *tmp = params; } -#endif -#ifdef CONFIG_REVISION_TAG -void setup_revision_tag(struct tag **in_params) +static void setup_revision_tag(struct tag **in_params) { u32 rev = 0; - u32 get_board_rev(void); rev = get_board_rev(); params->hdr.tag = ATAG_REVISION; @@ -218,106 +177,50 @@ void setup_revision_tag(struct tag **in_params) params->u.revision.rev = rev; params = tag_next (params); } -#endif -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) static void setup_end_tag(bd_t *bd) { params->hdr.tag = ATAG_NONE; params->hdr.size = 0; } -#endif - -#ifdef CONFIG_OF_LIBFDT -static int create_fdt(bootm_headers_t *images) -{ - ulong of_size = images->ft_len; - char **of_flat_tree = &images->ft_addr; - ulong *initrd_start = &images->initrd_start; - ulong *initrd_end = &images->initrd_end; - struct lmb *lmb = &images->lmb; - ulong rd_len; - int ret; - - debug("using: FDT\n"); - - boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); - - rd_len = images->rd_end - images->rd_start; - ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, - initrd_start, initrd_end); - if (ret) - return ret; - - ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); - if (ret) - return ret; - - fdt_chosen(*of_flat_tree, 1); - fixup_memory_node(*of_flat_tree); - fdt_fixup_ethernet(*of_flat_tree); - fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); -#ifdef CONFIG_OF_BOARD_SETUP - ft_board_setup(*of_flat_tree, gd->bd); -#endif - - return 0; -} -#endif __weak void setup_board_tags(struct tag **in_params) {} /* Subcommand: PREP */ static void boot_prep_linux(bootm_headers_t *images) { -#ifdef CONFIG_CMDLINE_TAG char *commandline = getenv("bootargs"); -#endif + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { #ifdef CONFIG_OF_LIBFDT - if (images->ft_len) { debug("using: FDT\n"); - if (create_fdt(images)) { + if (image_setup_linux(images)) { printf("FDT creation failed! hanging..."); hang(); } - } else #endif - { -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) + } else if (BOOTM_ENABLE_TAGS) { debug("using: ATAGS\n"); setup_start_tag(gd->bd); -#ifdef CONFIG_SERIAL_TAG - setup_serial_tag(¶ms); -#endif -#ifdef CONFIG_CMDLINE_TAG - setup_commandline_tag(gd->bd, commandline); -#endif -#ifdef CONFIG_REVISION_TAG - setup_revision_tag(¶ms); -#endif -#ifdef CONFIG_SETUP_MEMORY_TAGS - setup_memory_tags(gd->bd); -#endif -#ifdef CONFIG_INITRD_TAG - if (images->rd_start && images->rd_end) - setup_initrd_tag(gd->bd, images->rd_start, - images->rd_end); -#endif + if (BOOTM_ENABLE_SERIAL_TAG) + setup_serial_tag(¶ms); + if (BOOTM_ENABLE_CMDLINE_TAG) + setup_commandline_tag(gd->bd, commandline); + if (BOOTM_ENABLE_REVISION_TAG) + setup_revision_tag(¶ms); + if (BOOTM_ENABLE_MEMORY_TAGS) + setup_memory_tags(gd->bd); + if (BOOTM_ENABLE_INITRD_TAG) { + if (images->rd_start && images->rd_end) { + setup_initrd_tag(gd->bd, images->rd_start, + images->rd_end); + } + } setup_board_tags(¶ms); setup_end_tag(gd->bd); -#else /* all tags */ + } else { printf("FDT and ATAGS support not compiled in - hanging\n"); hang(); -#endif /* all tags */ } } @@ -342,11 +245,9 @@ static void boot_jump_linux(bootm_headers_t *images) bootstage_mark(BOOTSTAGE_ID_RUN_OS); announce_and_cleanup(); -#ifdef CONFIG_OF_LIBFDT - if (images->ft_len) + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) r2 = (unsigned long)images->ft_addr; else -#endif r2 = gd->bd->bi_boot_params; kernel_entry(0, machid, r2); diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index b545fb79b..8b1c8ed4b 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -27,7 +27,7 @@ void __flush_cache(unsigned long start, unsigned long size) { -#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136) +#if defined(CONFIG_ARM1136) void arm1136_cache_flush(void); arm1136_cache_flush(); diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index a9657d190..a5bffb8da 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -97,13 +97,13 @@ ENTRY(_main) * 'here' but relocated. */ - ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */ + ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ sub r8, r8, #GD_SIZE /* new GD is below bd */ adr lr, here - ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */ + ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ add lr, lr, r0 ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */ b relocate_code diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S new file mode 100644 index 000000000..cd2bab6cd --- /dev/null +++ b/arch/arm/lib/relocate.S @@ -0,0 +1,90 @@ +/* + * relocate - common relocation function for ARM U-Boot + * + * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/linkage.h> + +/* + * void relocate_code(addr_moni) + * + * This function relocates the monitor code. + * + * NOTE: + * To prevent the code below from containing references with an R_ARM_ABS32 + * relocation record type, we never refer to linker-defined symbols directly. + * Instead, we declare literals which contain their relative location with + * respect to relocate_code, and at run time, add relocate_code back to them. + */ + +ENTRY(relocate_code) + ldr r1, =__image_copy_start /* r1 <- SRC &__image_copy_start */ + subs r9, r0, r1 /* r9 <- relocation offset */ + beq relocate_done /* skip relocation */ + ldr r2, =__image_copy_end /* r2 <- SRC &__image_copy_end */ + +copy_loop: + ldmia r1!, {r10-r11} /* copy from source address [r1] */ + stmia r0!, {r10-r11} /* copy to target address [r0] */ + cmp r1, r2 /* until source end address [r2] */ + blo copy_loop + + /* + * fix .rel.dyn relocations + */ + ldr r2, =__rel_dyn_start /* r2 <- SRC &__rel_dyn_start */ + ldr r3, =__rel_dyn_end /* r3 <- SRC &__rel_dyn_end */ +fixloop: + ldmia r2!, {r0-r1} /* (r0,r1) <- (SRC location,fixup) */ + and r1, r1, #0xff + cmp r1, #23 /* relative fixup? */ + bne fixnext + + /* relative fix: increase location by offset */ + add r0, r0, r9 + ldr r1, [r0] + add r1, r1, r9 + str r1, [r0] +fixnext: + cmp r2, r3 + blo fixloop + +relocate_done: + +#ifdef __XSCALE__ + /* + * On xscale, icache must be invalidated and write buffers drained, + * even with cache disabled - 4.2.7 of xscale core developer's manual + */ + mcr p15, 0, r0, c7, c7, 0 /* invalidate icache */ + mcr p15, 0, r0, c7, c10, 4 /* drain write buffer */ +#endif + + /* ARMv4- don't know bx lr but the assembler fails to see that */ + +#ifdef __ARM_ARCH_4__ + mov pc, lr +#else + bx lr +#endif + +ENDPROC(relocate_code) diff --git a/arch/arm/lib/bss.c b/arch/arm/lib/sections.c index 99eda5913..5921dd8d6 100644 --- a/arch/arm/lib/bss.c +++ b/arch/arm/lib/sections.c @@ -35,5 +35,9 @@ * aliasing warnings. */ -char __bss_start[0] __attribute__((used, section(".__bss_start"))); -char __bss_end[0] __attribute__((used, section(".__bss_end"))); +char __bss_start[0] __attribute__((section(".__bss_start"))); +char __bss_end[0] __attribute__((section(".__bss_end"))); +char __image_copy_start[0] __attribute__((section(".__image_copy_start"))); +char __image_copy_end[0] __attribute__((section(".__image_copy_end"))); +char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start"))); +char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end"))); |