1 files changed, 407 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-tegra20/clock.h b/arch/arm/include/asm/arch-tegra20/clock.h
new file mode 100644
index 000000000..ff83bbf29
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/clock.h
@@ -0,0 +1,407 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra2 clock control functions */
+
+#ifndef _CLOCK_H
+#define _CLOCK_H
+
+/* Set of oscillator frequencies supported in the internal API. */
+enum clock_osc_freq {
+	/* All in MHz, so 13_0 is 13.0MHz */
+	CLOCK_OSC_FREQ_13_0,
+	CLOCK_OSC_FREQ_19_2,
+	CLOCK_OSC_FREQ_12_0,
+	CLOCK_OSC_FREQ_26_0,
+
+	CLOCK_OSC_FREQ_COUNT,
+};
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+
+	/* These are the base clocks (inputs to the Tegra SOC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+
+	CLOCK_ID_COUNT,	/* number of clocks */
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_RESERVED1,
+	PERIPH_ID_RESERVED2,
+	PERIPH_ID_AC97,
+	PERIPH_ID_RTC,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_NDFLASH,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_TWC,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_EPP,
+	PERIPH_ID_VI,
+	PERIPH_ID_2D,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_3D,
+	PERIPH_ID_IDE,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_RESERVED30,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_KBC,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_PMC,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_XIO,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_DVC_I2C,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_TVO,
+	PERIPH_ID_MIPI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_TVDAC,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_RESERVED56,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_MPE,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 */
+	PERIPH_ID_SPEEDO,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_RESERVED74,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_RESERVED76,
+	PERIPH_ID_RESERVED77,
+	PERIPH_ID_RESERVED78,
+	PERIPH_ID_RESERVED79,
+
+	/* 80 */
+	PERIPH_ID_RESERVED80,
+	PERIPH_ID_RESERVED81,
+	PERIPH_ID_RESERVED82,
+	PERIPH_ID_RESERVED83,
+	PERIPH_ID_IRAMA,
+	PERIPH_ID_IRAMB,
+	PERIPH_ID_IRAMC,
+	PERIPH_ID_IRAMD,
+
+	/* 88 */
+	PERIPH_ID_CRAM2,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */
+#define PERIPH_REG(id) ((id) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range, and not a simple PLL */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \
+		(id) < CLOCK_ID_FIRST_SIMPLE)
+
+/* PLL stabilization delay in usec */
+#define CLOCK_PLL_STABLE_DELAY_US 300
+
+/* return the current oscillator clock frequency */
+enum clock_osc_freq clock_get_osc_freq(void);
+
+/**
+ * Start PLL using the provided configuration parameters.
+ *
+ * @param id	clock id
+ * @param divm	input divider
+ * @param divn	feedback divider
+ * @param divp	post divider 2^n
+ * @param cpcon	charge pump setup control
+ * @param lfcon	loop filter setup control
+ *
+ * @returns monotonic time in us that the PLL will be stable
+ */
+unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn,
+		u32 divp, u32 cpcon, u32 lfcon);
+
+/**
+ * Read low-level parameters of a PLL.
+ *
+ * @param id	clock id to read (note: USB is not supported)
+ * @param divm	returns input divider
+ * @param divn	returns feedback divider
+ * @param divp	returns post divider 2^n
+ * @param cpcon	returns charge pump setup control
+ * @param lfcon	returns loop filter setup control
+ *
+ * @returns 0 if ok, -1 on error (invalid clock id)
+ */
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+		      u32 *divp, u32 *cpcon, u32 *lfcon);
+
+/*
+ * Enable a clock
+ *
+ * @param id	clock id
+ */
+void clock_enable(enum periph_id clkid);
+
+/*
+ * Disable a clock
+ *
+ * @param id	clock id
+ */
+void clock_disable(enum periph_id clkid);
+
+/*
+ * Set whether a clock is enabled or disabled.
+ *
+ * @param id		clock id
+ * @param enable	1 to enable, 0 to disable
+ */
+void clock_set_enable(enum periph_id clkid, int enable);
+
+/**
+ * Reset a peripheral. This puts it in reset, waits for a delay, then takes
+ * it out of reset and waits for th delay again.
+ *
+ * @param periph_id	peripheral to reset
+ * @param us_delay	time to delay in microseconds
+ */
+void reset_periph(enum periph_id periph_id, int us_delay);
+
+/**
+ * Put a peripheral into or out of reset.
+ *
+ * @param periph_id	peripheral to reset
+ * @param enable	1 to put into reset, 0 to take out of reset
+ */
+void reset_set_enable(enum periph_id periph_id, int enable);
+
+
+/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */
+enum crc_reset_id {
+	/* Things we can hold in reset for each CPU */
+	crc_rst_cpu = 1,
+	crc_rst_de = 1 << 2,	/* What is de? */
+	crc_rst_watchdog = 1 << 3,
+	crc_rst_debug = 1 << 4,
+};
+
+/**
+ * Put parts of the CPU complex into or out of reset.\
+ *
+ * @param cpu		cpu number (0 or 1 on Tegra2)
+ * @param which		which parts of the complex to affect (OR of crc_reset_id)
+ * @param reset		1 to assert reset, 0 to de-assert
+ */
+void reset_cmplx_set_enable(int cpu, int which, int reset);
+
+/**
+ * Set the source for a peripheral clock. This plus the divisor sets the
+ * clock rate. You need to look up the datasheet to see the meaning of the
+ * source parameter as it changes for each peripheral.
+ *
+ * Warning: This function is only for use pre-relocation. Please use
+ * clock_start_periph_pll() instead.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param source	source clock (0, 1, 2 or 3)
+ */
+void clock_ll_set_source(enum periph_id periph_id, unsigned source);
+
+/**
+ * Set the source and divisor for a peripheral clock. This sets the
+ * clock rate. You need to look up the datasheet to see the meaning of the
+ * source parameter as it changes for each peripheral.
+ *
+ * Warning: This function is only for use pre-relocation. Please use
+ * clock_start_periph_pll() instead.
+ *
+ * @param periph_id	peripheral to adjust
+ * @param source	source clock (0, 1, 2 or 3)
+ * @param divisor	divisor value to use
+ */
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+		unsigned divisor);
+
+/**
+ * Start a peripheral PLL clock at the given rate. This also resets the
+ * peripheral.
+ *
+ * @param periph_id	peripheral to start
+ * @param parent	PLL id of required parent clock
+ * @param rate		Required clock rate in Hz
+ * @return rate selected in Hz, or -1U if something went wrong
+ */
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate);
+
+/**
+ * Returns the rate of a peripheral clock in Hz. Since the caller almost
+ * certainly knows the parent clock (having just set it) we require that
+ * this be passed in so we don't need to work it out.
+ *
+ * @param periph_id	peripheral to start
+ * @param parent	PLL id of parent clock (used to calculate rate, you
+ *			must know this!)
+ * @return clock rate of peripheral in Hz
+ */
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+		enum clock_id parent);
+
+/**
+ * Adjust peripheral PLL clock to the given rate. This does not reset the
+ * peripheral. If a second stage divisor is not available, pass NULL for
+ * extra_div. If it is available, then this parameter will return the
+ * divisor selected (which will be a power of 2 from 1 to 256).
+ *
+ * @param periph_id	peripheral to start
+ * @param parent	PLL id of required parent clock
+ * @param rate		Required clock rate in Hz
+ * @param extra_div	value for the second-stage divisor (NULL if one is
+			not available)
+ * @return rate selected in Hz, or -1U if something went wrong
+ */
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+		enum clock_id parent, unsigned rate, int *extra_div);
+
+/**
+ * Returns the clock rate of a specified clock, in Hz.
+ *
+ * @param parent	PLL id of clock to check
+ * @return rate of clock in Hz
+ */
+unsigned clock_get_rate(enum clock_id clkid);
+
+/**
+ * Start up a UART using low-level calls
+ *
+ * Prior to relocation clock_start_periph_pll() cannot be called. This
+ * function provides a way to set up a UART using low-level calls which
+ * do not require BSS.
+ *
+ * @param periph_id	Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1)
+ */
+void clock_ll_start_uart(enum periph_id periph_id);
+
+/**
+ * Decode a peripheral ID from a device tree node.
+ *
+ * This works by looking up the peripheral's 'clocks' node and reading out
+ * the second cell, which is the clock number / peripheral ID.
+ *
+ * @param blob		FDT blob to use
+ * @param node		Node to look at
+ * @return peripheral ID, or PERIPH_ID_NONE if none
+ */
+enum periph_id clock_decode_periph_id(const void *blob, int node);
+
+/**
+ * Checks if the oscillator bypass is enabled (XOBP bit)
+ *
+ * @return 1 if bypass is enabled, 0 if not
+ */
+int clock_get_osc_bypass(void);
+
+/*
+ * Checks that clocks are valid and prints a warning if not
+ *
+ * @return 0 if ok, -1 on error
+ */
+int clock_verify(void);
+
+/* Initialize the clocks */
+void clock_init(void);
+
+/* Initialize the PLLs */
+void clock_early_init(void);
+
+#endif