diff options
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/s3c44b0/Makefile | 34 | ||||
| -rw-r--r-- | arch/arm/cpu/s3c44b0/cache.c | 74 | ||||
| -rw-r--r-- | arch/arm/cpu/s3c44b0/config.mk | 18 | ||||
| -rw-r--r-- | arch/arm/cpu/s3c44b0/cpu.c | 58 | ||||
| -rw-r--r-- | arch/arm/cpu/s3c44b0/start.S | 228 | ||||
| -rw-r--r-- | arch/arm/cpu/s3c44b0/timer.c | 102 |
6 files changed, 0 insertions, 514 deletions
diff --git a/arch/arm/cpu/s3c44b0/Makefile b/arch/arm/cpu/s3c44b0/Makefile deleted file mode 100644 index 39fdbf86c..000000000 --- a/arch/arm/cpu/s3c44b0/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).o - -START = start.o - -COBJS += cache.o -COBJS += cpu.o -COBJS += timer.o - -SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -START := $(addprefix $(obj),$(START)) - -all: $(obj).depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/s3c44b0/cache.c b/arch/arm/cpu/s3c44b0/cache.c deleted file mode 100644 index aeee02d85..000000000 --- a/arch/arm/cpu/s3c44b0/cache.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/hardware.h> - -static void s3c44b0_flush_cache(void) -{ - volatile int i; - /* flush cycle */ - for(i=0x10002000;i<0x10004800;i+=16) - { - *((int *)i)=0x0; - } -} - -void icache_enable (void) -{ - ulong reg; - - s3c44b0_flush_cache(); - - /* - Init cache - Non-cacheable area (everything outside RAM) - 0x0000:0000 - 0x0C00:0000 - */ - NCACHBE0 = 0xC0000000; - NCACHBE1 = 0x00000000; - - /* - Enable chache - */ - reg = SYSCFG; - reg |= 0x00000006; /* 8kB */ - SYSCFG = reg; -} - -void icache_disable (void) -{ - ulong reg; - - reg = SYSCFG; - reg &= ~0x00000006; /* 8kB */ - SYSCFG = reg; -} - -int icache_status (void) -{ - return 0; -} - -void dcache_enable (void) -{ - icache_enable(); -} - -void dcache_disable (void) -{ - icache_disable(); -} - -int dcache_status (void) -{ - return dcache_status(); -} diff --git a/arch/arm/cpu/s3c44b0/config.mk b/arch/arm/cpu/s3c44b0/config.mk deleted file mode 100644 index b902ca36a..000000000 --- a/arch/arm/cpu/s3c44b0/config.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - -PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi -msoft-float -# ========================================================================= -# -# Supply options according to compiler version -# -# ======================================================================== -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/s3c44b0/cpu.c b/arch/arm/cpu/s3c44b0/cpu.c deleted file mode 100644 index fa931503a..000000000 --- a/arch/arm/cpu/s3c44b0/cpu.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * S3C44B0 CPU specific code - */ - -#include <common.h> -#include <command.h> -#include <asm/hardware.h> - -int arch_cpu_init (void) -{ - icache_enable(); - - return 0; -} - -int cleanup_before_linux (void) -{ - /* - cache memory should be enabled before calling - Linux to make the kernel uncompression faster - */ - icache_enable(); - - disable_interrupts (); - - return 0; -} - -void reset_cpu (ulong addr) -{ - /* - reset the cpu using watchdog - */ - - /* Disable the watchdog.*/ - WTCON&=~(1<<5); - - /* set the timeout value to a short time... */ - WTCNT = 0x1; - - /* Enable the watchdog. */ - WTCON|=1; - WTCON|=(1<<5); - - while(1) { - /*NOP*/ - } -} diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S deleted file mode 100644 index 6a59592f4..000000000 --- a/arch/arm/cpu/s3c44b0/start.S +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Startup Code for S3C44B0 CPU-core - * - * (C) Copyright 2004 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <config.h> -#include <version.h> - -/* - * Jump vector table - */ - - -.globl _start -_start: b reset - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * relocate u-boot to ram - * setup stack - * jump to second stage - * - ************************************************************************* - */ - -.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - bl lowlevel_init -#endif - - bl _main - -/*------------------------------------------------------------------------------*/ - - .globl c_runtime_cpu_setup -c_runtime_cpu_setup: - - bx lr - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - -#define INTCON (0x01c00000+0x200000) -#define INTMSK (0x01c00000+0x20000c) -#define LOCKTIME (0x01c00000+0x18000c) -#define PLLCON (0x01c00000+0x180000) -#define CLKCON (0x01c00000+0x180004) -#define WTCON (0x01c00000+0x130000) -cpu_init_crit: - /* disable watch dog */ - ldr r0, =WTCON - ldr r1, =0x0 - str r1, [r0] - - /* - * mask all IRQs by clearing all bits in the INTMRs - */ - ldr r1,=INTMSK - ldr r0, =0x03fffeff - str r0, [r1] - - ldr r1, =INTCON - ldr r0, =0x05 - str r0, [r1] - - /* Set Clock Control Register */ - ldr r1, =LOCKTIME - ldrb r0, =800 - strb r0, [r1] - - ldr r1, =PLLCON - -#if CONFIG_S3C44B0_CLOCK_SPEED==66 - ldr r0, =0x34031 /* 66MHz (Quartz=11MHz) */ -#elif CONFIG_S3C44B0_CLOCK_SPEED==75 - ldr r0, =0x610c1 /*B2: Xtal=20mhz Fclk=75MHz */ -#else -# error CONFIG_S3C44B0_CLOCK_SPEED undefined -#endif - - str r0, [r1] - - ldr r1,=CLKCON - ldr r0, =0x7ff8 - str r0, [r1] - - mov pc, lr - - -/*************************************************/ -/* interrupt vectors */ -/*************************************************/ -real_vectors: - b reset - b undefined_instruction - b software_interrupt - b prefetch_abort - b data_abort - b not_used - b irq - b fiq - -/*************************************************/ - -undefined_instruction: - mov r6, #3 - b reset - -software_interrupt: - mov r6, #4 - b reset - -prefetch_abort: - mov r6, #5 - b reset - -data_abort: - mov r6, #6 - b reset - -not_used: - /* we *should* never reach this */ - mov r6, #7 - b reset - -irq: - mov r6, #8 - b reset - -fiq: - mov r6, #9 - b reset diff --git a/arch/arm/cpu/s3c44b0/timer.c b/arch/arm/cpu/s3c44b0/timer.c deleted file mode 100644 index f25af7a39..000000000 --- a/arch/arm/cpu/s3c44b0/timer.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/hardware.h> - -/* we always count down the max. */ -#define TIMER_LOAD_VAL 0xffff - -/* macro to read the 16 bit timer */ -#define READ_TIMER (TCNTO1 & 0xffff) - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ NOT supported -#endif - -static ulong timestamp; -static ulong lastdec; - -int timer_init (void) -{ - TCFG0 = 0x000000E9; - TCFG1 = 0x00000004; - TCON = 0x00000900; - TCNTB1 = TIMER_LOAD_VAL; - TCMPB1 = 0; - TCON = 0x00000B00; - TCON = 0x00000900; - - - lastdec = TCNTB1 = TIMER_LOAD_VAL; - timestamp = 0; - return 0; -} - -/* - * timer without interrupts - */ -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -void __udelay (unsigned long usec) -{ - ulong tmo; - - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 8; - - tmo += get_timer (0); - - while (get_timer_masked () < tmo) - /*NOP*/; -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - lastdec = now; - - return timestamp; -} - -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 8; - } else { - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*8); - } - - endtime = get_timer(0) + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} |