1 files changed, 195 insertions, 89 deletions

diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index d0c3ff702..2f4b24752 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -32,6 +32,7 @@
 #include <asm/armv7.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/clocks.h>
 #include <asm/sizes.h>
 #include <asm/utils.h>
 #include <asm/arch/gpio.h>
@@ -56,76 +57,58 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
 /* LPDDR2 specific IO settings */
 static void io_settings_lpddr2(void)
 {
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+	const struct ctrl_ioregs *ioregs;
 
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch1_0));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch1_1));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch2_0));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
-				&(ioregs_base->control_ddrch2_1));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
-				&(ioregs_base->control_lpddr2ch1_0));
-	writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
-				&(ioregs_base->control_lpddr2ch1_1));
-	writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
-				&(ioregs_base->control_ddrio_0));
-	writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
-				&(ioregs_base->control_ddrio_1));
-	writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
-				&(ioregs_base->control_ddrio_2));
+	get_ioregs(&ioregs);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
+	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+	writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
 }
 
 /* DDR3 specific IO settings */
 static void io_settings_ddr3(void)
 {
 	u32 io_settings = 0;
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
+	const struct ctrl_ioregs *ioregs;
 
-	writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddr3ch1_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch1_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch1_1));
+	get_ioregs(&ioregs);
+	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
 
-	writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddr3ch2_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch2_0));
-	writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
-				&(ioregs_base->control_ddrch2_1));
+	writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+	writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
 
-	writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_0));
-	writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_1));
-	writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
-				&(ioregs_base->control_ddrio_2));
+	writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+	writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+	writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
 
 	/* omap5432 does not use lpddr2 */
-	writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
-	writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+	writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
 
-	writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
-			&(ioregs_base->control_emif1_sdram_config_ext));
-	writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
-			&(ioregs_base->control_emif2_sdram_config_ext));
+	writel(ioregs->ctrl_emif_sdram_config_ext,
+	       (*ctrl)->control_emif1_sdram_config_ext);
+	writel(ioregs->ctrl_emif_sdram_config_ext,
+	       (*ctrl)->control_emif2_sdram_config_ext);
 
 	/* Disable DLL select */
-	io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+	io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
 							& 0xFFEFFFFF);
 	writel(io_settings,
-		&(ioregs_base->control_port_emif1_sdram_config));
+		(*ctrl)->control_port_emif1_sdram_config);
 
-	io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+	io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
 							& 0xFFEFFFFF);
 	writel(io_settings,
-		&(ioregs_base->control_port_emif2_sdram_config));
+		(*ctrl)->control_port_emif2_sdram_config);
 }
 
 /*
@@ -134,88 +117,198 @@ static void io_settings_ddr3(void)
 void do_io_settings(void)
 {
 	u32 io_settings = 0, mask = 0;
-	struct omap_sys_ctrl_regs *ioregs_base =
-		      (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
 
 	/* Impedance settings EMMC, C2C 1,2, hsi2 */
 	mask = (ds_mask << 2) | (ds_mask << 8) |
 		(ds_mask << 16) | (ds_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
 				(~mask);
 	io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
 			(ds_45_ohm << 18) | (ds_60_ohm << 2);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_0));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
 
 	/* Impedance settings Mcspi2 */
 	mask = (ds_mask << 30);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
 			(~mask);
 	io_settings |= (ds_60_ohm << 30);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
 
 	/* Impedance settings C2C 3,4 */
 	mask = (ds_mask << 14) | (ds_mask << 16);
-	io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) &
+	io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
 			(~mask);
 	io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
-	writel(io_settings, &(ioregs_base->control_smart1io_padconf_2));
+	writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
 
 	/* Slew rate settings EMMC, C2C 1,2 */
 	mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
 			(~mask);
 	io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_0));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
 
 	/* Slew rate settings hsi2, Mcspi2 */
 	mask = (sc_mask << 24) | (sc_mask << 28);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
 			(~mask);
 	io_settings |= (sc_fast << 28) | (sc_fast << 24);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
 
 	/* Slew rate settings C2C 3,4 */
 	mask = (sc_mask << 16) | (sc_mask << 18);
-	io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) &
+	io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
 			(~mask);
 	io_settings |= (sc_na << 16) | (sc_na << 18);
-	writel(io_settings, &(ioregs_base->control_smart2io_padconf_2));
+	writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
 
 	/* impedance and slew rate settings for usb */
 	mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
 		(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
-	io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) &
+	io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
 			(~mask);
 	io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
 		       (ds_60_ohm << 23) | (sc_fast << 20) |
 		       (sc_fast << 17) | (sc_fast << 14);
-	writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
+	writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
 
-	if (omap_revision() <= OMAP5430_ES1_0)
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 		io_settings_lpddr2();
 	else
 		io_settings_ddr3();
 
 	/* Efuse settings */
-	writel(EFUSE_1, &(ioregs_base->control_efuse_1));
-	writel(EFUSE_2, &(ioregs_base->control_efuse_2));
-	writel(EFUSE_3, &(ioregs_base->control_efuse_3));
-	writel(EFUSE_4, &(ioregs_base->control_efuse_4));
+	writel(EFUSE_1, (*ctrl)->control_efuse_1);
+	writel(EFUSE_2, (*ctrl)->control_efuse_2);
+	writel(EFUSE_3, (*ctrl)->control_efuse_3);
+	writel(EFUSE_4, (*ctrl)->control_efuse_4);
+}
+
+static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
+	{0x45, 0x1},	/* 12 MHz   */
+	{-1, -1},	/* 13 MHz   */
+	{0x63, 0x2},	/* 16.8 MHz */
+	{0x57, 0x2},	/* 19.2 MHz */
+	{0x20, 0x1},	/* 26 MHz   */
+	{-1, -1},	/* 27 MHz   */
+	{0x41, 0x3}	/* 38.4 MHz */
+};
+
+void srcomp_enable(void)
+{
+	u32 srcomp_value, mul_factor, div_factor, clk_val, i;
+	u32 sysclk_ind	= get_sys_clk_index();
+	u32 omap_rev	= omap_revision();
+
+	mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
+	div_factor = srcomp_parameters[sysclk_ind].divide_factor;
+
+	for (i = 0; i < 4; i++) {
+		srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4);
+		srcomp_value &=
+			~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK);
+		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+			(div_factor << DIVIDE_FACTOR_XS_SHIFT);
+		writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4);
+	}
+
+	if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) {
+		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+		for (i = 0; i < 4; i++) {
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~PWRDWN_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+
+			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+				& SRCODE_READ_XS_MASK) >>
+				SRCODE_READ_XS_SHIFT) == 0)
+				;
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~OVERRIDE_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+	} else {
+		srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK |
+				  DIVIDE_FACTOR_XS_MASK);
+		srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+				(div_factor << DIVIDE_FACTOR_XS_SHIFT);
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		for (i = 0; i < 4; i++) {
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~OVERRIDE_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~OVERRIDE_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+		clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+		clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+		clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+		writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+
+		for (i = 0; i < 4; i++) {
+			while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+				& SRCODE_READ_XS_MASK) >>
+				SRCODE_READ_XS_SHIFT) == 0)
+				;
+
+			srcomp_value =
+				readl((*ctrl)->control_srcomp_north_side + i*4);
+			srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+			writel(srcomp_value,
+			       (*ctrl)->control_srcomp_north_side + i*4);
+		}
+
+		while (((readl((*ctrl)->control_srcomp_east_side_wkup) &
+			SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0)
+			;
+
+		srcomp_value =
+			readl((*ctrl)->control_srcomp_east_side_wkup);
+		srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+		writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+	}
 }
 #endif
 
 void config_data_eye_leveling_samples(u32 emif_base)
 {
-	struct omap_sys_ctrl_regs *ioregs_base =
-		(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
 	/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
 	if (emif_base == EMIF1_BASE)
 		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			&(ioregs_base->control_emif1_sdram_config_ext));
+			(*ctrl)->control_emif1_sdram_config_ext);
 	else if (emif_base == EMIF2_BASE)
 		writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
-			&(ioregs_base->control_emif2_sdram_config_ext));
+			(*ctrl)->control_emif2_sdram_config_ext);
 }
 
 void init_omap_revision(void)
@@ -227,17 +320,25 @@ void init_omap_revision(void)
 	 */
 	unsigned int rev = cortex_rev();
 
-	switch (rev) {
-	case MIDR_CORTEX_A15_R0P0:
-		switch (readl(CONTROL_ID_CODE)) {
-		case OMAP5430_CONTROL_ID_CODE_ES1_0:
-			*omap_si_rev = OMAP5430_ES1_0;
-			break;
-		case OMAP5432_CONTROL_ID_CODE_ES1_0:
-		default:
-			*omap_si_rev = OMAP5432_ES1_0;
-			break;
-		}
+	switch (readl(CONTROL_ID_CODE)) {
+	case OMAP5430_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = OMAP5430_ES1_0;
+		if (rev == MIDR_CORTEX_A15_R2P2)
+			*omap_si_rev = OMAP5430_ES2_0;
+		break;
+	case OMAP5432_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = OMAP5432_ES1_0;
+		if (rev == MIDR_CORTEX_A15_R2P2)
+			*omap_si_rev = OMAP5432_ES2_0;
+		break;
+	case OMAP5430_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = OMAP5430_ES2_0;
+		break;
+	case OMAP5432_CONTROL_ID_CODE_ES2_0:
+		*omap_si_rev = OMAP5432_ES2_0;
+		break;
+	case DRA752_CONTROL_ID_CODE_ES1_0:
+		*omap_si_rev = DRA752_ES1_0;
 		break;
 	default:
 		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
@@ -253,7 +354,12 @@ void reset_cpu(ulong ignored)
 	 * So use cold reset in case instead.
 	 */
 	if (omap_rev == OMAP5430_ES1_0)
-		writel(PRM_RSTCTRL_RESET << 0x1, PRM_RSTCTRL);
+		writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl);
 	else
-		writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
+		writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl);
+}
+
+u32 warm_reset(void)
+{
+	return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
 }