diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap-common')
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/Makefile | 6 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/gpio.c | 176 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/spl.c | 272 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 62 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/utils.c | 57 |
5 files changed, 573 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index dc01ee5d3..ea9f8ec49 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -28,6 +28,12 @@ LIB = $(obj)libomap-common.o SOBJS := reset.o COBJS := timer.o +COBJS += utils.o +COBJS += gpio.o + +ifdef CONFIG_SPL_BUILD +COBJS += spl.o +endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/armv7/omap-common/gpio.c b/arch/arm/cpu/armv7/omap-common/gpio.c new file mode 100644 index 000000000..f4c347941 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/gpio.c @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This work is derived from the linux 2.6.27 kernel source + * To fetch, use the kernel repository + * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + * Use the v2.6.27 tag. + * + * Below is the original's header including its copyright + * + * linux/arch/arm/plat-omap/gpio.c + * + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <common.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> +#include <asm/errno.h> + +static inline const struct gpio_bank *get_gpio_bank(int gpio) +{ + return &omap_gpio_bank[gpio >> 5]; +} + +static inline int get_gpio_index(int gpio) +{ + return gpio & 0x1f; +} + +static inline int gpio_valid(int gpio) +{ + if (gpio < 0) + return -1; + if (gpio < 192) + return 0; + return -1; +} + +static int check_gpio(int gpio) +{ + if (gpio_valid(gpio) < 0) { + printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); + return -1; + } + return 0; +} + +static void _set_gpio_direction(const struct gpio_bank *bank, int gpio, + int is_input) +{ + void *reg = bank->base; + u32 l; + + switch (bank->method) { + case METHOD_GPIO_24XX: + reg += OMAP_GPIO_OE; + break; + default: + return; + } + l = __raw_readl(reg); + if (is_input) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + __raw_writel(l, reg); +} + +void omap_set_gpio_direction(int gpio, int is_input) +{ + const struct gpio_bank *bank; + + if (check_gpio(gpio) < 0) + return; + bank = get_gpio_bank(gpio); + _set_gpio_direction(bank, get_gpio_index(gpio), is_input); +} + +static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio, + int enable) +{ + void *reg = bank->base; + u32 l = 0; + + switch (bank->method) { + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP_GPIO_SETDATAOUT; + else + reg += OMAP_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; + default: + printf("omap3-gpio unknown bank method %s %d\n", + __FILE__, __LINE__); + return; + } + __raw_writel(l, reg); +} + +void omap_set_gpio_dataout(int gpio, int enable) +{ + const struct gpio_bank *bank; + + if (check_gpio(gpio) < 0) + return; + bank = get_gpio_bank(gpio); + _set_gpio_dataout(bank, get_gpio_index(gpio), enable); +} + +int omap_get_gpio_datain(int gpio) +{ + const struct gpio_bank *bank; + void *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + bank = get_gpio_bank(gpio); + reg = bank->base; + switch (bank->method) { + case METHOD_GPIO_24XX: + reg += OMAP_GPIO_DATAIN; + break; + default: + return -EINVAL; + } + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; +} + +static void _reset_gpio(const struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); +} + +int omap_request_gpio(int gpio) +{ + if (check_gpio(gpio) < 0) + return -EINVAL; + + return 0; +} + +void omap_free_gpio(int gpio) +{ + const struct gpio_bank *bank; + + if (check_gpio(gpio) < 0) + return; + bank = get_gpio_bank(gpio); + + _reset_gpio(bank, gpio); +} diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c new file mode 100644 index 000000000..d1776522b --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/spl.c @@ -0,0 +1,272 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/u-boot.h> +#include <asm/utils.h> +#include <asm/arch/sys_proto.h> +#include <mmc.h> +#include <fat.h> +#include <timestamp_autogenerated.h> +#include <version_autogenerated.h> +#include <asm/omap_common.h> +#include <asm/arch/mmc_host_def.h> +#include <i2c.h> +#include <image.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Define global data structure pointer to it*/ +static gd_t gdata __attribute__ ((section(".data"))); +static bd_t bdata __attribute__ ((section(".data"))); +static const char *image_name; +static u8 image_os; +static u32 image_load_addr; +static u32 image_entry_point; +static u32 image_size; + +inline void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;) + ; +} + +void board_init_f(ulong dummy) +{ + /* + * We call relocate_code() with relocation target same as the + * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting + * skipped. Instead, only .bss initialization will happen. That's + * all we need + */ + debug(">>board_init_f()\n"); + relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); +} + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + switch (omap_boot_device()) { + case BOOT_DEVICE_MMC1: + omap_mmc_init(0); + break; + case BOOT_DEVICE_MMC2: + omap_mmc_init(1); + break; + } + return 0; +} +#endif + +static void parse_image_header(const struct image_header *header) +{ + u32 header_size = sizeof(struct image_header); + + if (__be32_to_cpu(header->ih_magic) == IH_MAGIC) { + image_size = __be32_to_cpu(header->ih_size) + header_size; + image_entry_point = __be32_to_cpu(header->ih_load); + /* Load including the header */ + image_load_addr = image_entry_point - header_size; + image_os = header->ih_os; + image_name = (const char *)&header->ih_name; + debug("spl: payload image: %s load addr: 0x%x size: %d\n", + image_name, image_load_addr, image_size); + } else { + /* Signature not found - assume u-boot.bin */ + printf("mkimage signature not found - ih_magic = %x\n", + header->ih_magic); + puts("Assuming u-boot.bin ..\n"); + /* Let's assume U-Boot will not be more than 200 KB */ + image_size = 200 * 1024; + image_entry_point = CONFIG_SYS_TEXT_BASE; + image_load_addr = CONFIG_SYS_TEXT_BASE; + image_os = IH_OS_U_BOOT; + image_name = "U-Boot"; + } +} + +static void mmc_load_image_raw(struct mmc *mmc) +{ + u32 image_size_sectors, err; + const struct image_header *header; + + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - + sizeof(struct image_header)); + + /* read image header to find the image size & load address */ + err = mmc->block_dev.block_read(0, + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1, + (void *)header); + + if (err <= 0) + goto end; + + parse_image_header(header); + + /* convert size to sectors - round up */ + image_size_sectors = (image_size + MMCSD_SECTOR_SIZE - 1) / + MMCSD_SECTOR_SIZE; + + /* Read the header too to avoid extra memcpy */ + err = mmc->block_dev.block_read(0, + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, + image_size_sectors, (void *)image_load_addr); + +end: + if (err <= 0) { + printf("spl: mmc blk read err - %d\n", err); + hang(); + } +} + +static void mmc_load_image_fat(struct mmc *mmc) +{ + s32 err; + struct image_header *header; + + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - + sizeof(struct image_header)); + + err = fat_register_device(&mmc->block_dev, + CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION); + if (err) { + printf("spl: fat register err - %d\n", err); + hang(); + } + + err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, + (u8 *)header, sizeof(struct image_header)); + if (err <= 0) + goto end; + + parse_image_header(header); + + err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, + (u8 *)image_load_addr, 0); + +end: + if (err <= 0) { + printf("spl: error reading image %s, err - %d\n", + CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err); + hang(); + } +} + +static void mmc_load_image(void) +{ + struct mmc *mmc; + int err; + u32 boot_mode; + + mmc_initialize(gd->bd); + /* We register only one device. So, the dev id is always 0 */ + mmc = find_mmc_device(0); + if (!mmc) { + puts("spl: mmc device not found!!\n"); + hang(); + } + + err = mmc_init(mmc); + if (err) { + printf("spl: mmc init failed: err - %d\n", err); + hang(); + } + + boot_mode = omap_boot_mode(); + if (boot_mode == MMCSD_MODE_RAW) { + debug("boot mode - RAW\n"); + mmc_load_image_raw(mmc); + } else if (boot_mode == MMCSD_MODE_FAT) { + debug("boot mode - FAT\n"); + mmc_load_image_fat(mmc); + } else { + puts("spl: wrong MMC boot mode\n"); + hang(); + } +} + +void jump_to_image_no_args(void) +{ + typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn)); + image_entry_noargs_t image_entry = + (image_entry_noargs_t) image_entry_point; + + image_entry(); +} + +void jump_to_image_no_args(void) __attribute__ ((noreturn)); +void board_init_r(gd_t *id, ulong dummy) +{ + u32 boot_device; + debug(">>spl:board_init_r()\n"); + + timer_init(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + boot_device = omap_boot_device(); + debug("boot device - %d\n", boot_device); + switch (boot_device) { + case BOOT_DEVICE_MMC1: + case BOOT_DEVICE_MMC2: + mmc_load_image(); + break; + default: + printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device); + hang(); + break; + } + + switch (image_os) { + case IH_OS_U_BOOT: + debug("Jumping to U-Boot\n"); + jump_to_image_no_args(); + break; + default: + puts("Unsupported OS image.. Jumping nevertheless..\n"); + jump_to_image_no_args(); + } +} + +void preloader_console_init(void) +{ + const char *u_boot_rev = U_BOOT_VERSION; + char rev_string_buffer[50]; + + gd = &gdata; + gd->bd = &bdata; + gd->flags |= GD_FLG_RELOC; + gd->baudrate = CONFIG_BAUDRATE; + + setup_clocks_for_console(); + serial_init(); /* serial communications setup */ + + /* Avoid a second "U-Boot" coming from this string */ + u_boot_rev = &u_boot_rev[7]; + + printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE, + U_BOOT_TIME); + omap_rev_string(rev_string_buffer); + printf("Texas Instruments %s\n", rev_string_buffer); +} diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds new file mode 100644 index 000000000..8867e0604 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end__ = .; + } >.sdram +} diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c new file mode 100644 index 000000000..ea935da45 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/utils.c @@ -0,0 +1,57 @@ +/* + * Copyright 2011 Linaro Limited + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +static void do_cancel_out(u32 *num, u32 *den, u32 factor) +{ + while (1) { + if (((*num)/factor*factor == (*num)) && + ((*den)/factor*factor == (*den))) { + (*num) /= factor; + (*den) /= factor; + } else + break; + } +} + +/* + * Cancel out the denominator and numerator of a fraction + * to get smaller numerator and denominator. + */ +void cancel_out(u32 *num, u32 *den, u32 den_limit) +{ + do_cancel_out(num, den, 2); + do_cancel_out(num, den, 3); + do_cancel_out(num, den, 5); + do_cancel_out(num, den, 7); + do_cancel_out(num, den, 11); + do_cancel_out(num, den, 13); + do_cancel_out(num, den, 17); + while ((*den) > den_limit) { + *num /= 2; + /* + * Round up the denominator so that the final fraction + * (num/den) is always <= the desired value + */ + *den = (*den + 1) / 2; + } +} |