diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mx28/spl_boot.c')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c b/arch/arm/cpu/arm926ejs/mx28/spl_boot.c index dfb8309e7..a6dfca3f5 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_boot.c @@ -28,6 +28,8 @@ #include <asm/io.h> #include <asm/arch/iomux-mx28.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> #include "mx28_init.h" @@ -46,12 +48,65 @@ void early_delay(int delay) ; } +#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) +const iomux_cfg_t iomux_boot[] = { + MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, +}; + +uint8_t mx28_get_bootmode_index(void) +{ + uint8_t bootmode = 0; + int i; + uint8_t masked; + + /* Setup IOMUX of bootmode pads to GPIO */ + mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); + + /* Setup bootmode pins as GPIO input */ + gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); + gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); + gpio_direction_input(MX28_PAD_LCD_D02__GPIO_1_2); + gpio_direction_input(MX28_PAD_LCD_D03__GPIO_1_3); + gpio_direction_input(MX28_PAD_LCD_D04__GPIO_1_4); + gpio_direction_input(MX28_PAD_LCD_D05__GPIO_1_5); + + /* Read bootmode pads */ + bootmode |= (gpio_get_value(MX28_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; + + for (i = 0; i < ARRAY_SIZE(mx28_boot_modes); i++) { + masked = bootmode & mx28_boot_modes[i].boot_mask; + if (masked == mx28_boot_modes[i].boot_pads) + break; + } + + return i; +} + void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, const unsigned int iomux_size) { + struct mx28_spl_data *data = (struct mx28_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); + uint8_t bootmode = mx28_get_bootmode_index(); + mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); mx28_power_init(); + mx28_mem_init(); + data->mem_dram_size = mx28_mem_get_size(); + + data->boot_mode_idx = bootmode; + mx28_power_wait_pswitch(); } @@ -68,8 +123,10 @@ inline void board_init_r(gd_t *id, ulong dest_addr) ; } +#ifndef CONFIG_SPL_SERIAL_SUPPORT void serial_putc(const char c) {} void serial_puts(const char *s) {} +#endif void hang(void) __attribute__ ((noreturn)); void hang(void) { |