diff options
Diffstat (limited to 'arch/arm/cpu/arm720t/interrupts.c')
| -rw-r--r-- | arch/arm/cpu/arm720t/interrupts.c | 106 |
1 files changed, 1 insertions, 105 deletions
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 5b21cc3ce..e3b59fef0 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -45,28 +45,10 @@ #define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK) #endif -#ifdef CONFIG_S3C4510B -/* require interrupts for the S3C4510B */ -# ifndef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B -# else -static struct _irq_handler IRQ_HANDLER[N_IRQS]; -# endif -#endif /* CONFIG_S3C4510B */ - #ifdef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { -#if defined(CONFIG_S3C4510B) - unsigned int pending; - - while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) { /* sentinal value for no pending interrutps */ - IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data); - - /* clear pending interrupt */ - PUT_REG( REG_INTPEND, (1<<(pending>>2))); - } -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) +#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No do_irq() for IntegratorAP/CM720T as yet */ #else #error do_irq() not defined for this CPU type @@ -74,23 +56,6 @@ void do_irq (struct pt_regs *pt_regs) } #endif -#ifdef CONFIG_S3C4510B -static void default_isr( void *data) { - printf ("default_isr(): called for IRQ %d\n", (int)data); -} - -static void timer_isr( void *data) { - unsigned int *pTime = (unsigned int *)data; - - (*pTime)++; - if ( !(*pTime % (CONFIG_SYS_HZ/4))) { - /* toggle LED 0 */ - PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1); - } - -} -#endif - #if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* Use IntegratorAP routines in board/integratorap.c */ #else @@ -98,32 +63,6 @@ static void timer_isr( void *data) { static ulong timestamp; static ulong lastdec; -#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B) -int arch_interrupt_init (void) -{ - int i; - - /* install default interrupt handlers */ - for ( i = 0; i < N_IRQS; i++) { - IRQ_HANDLER[i].m_data = (void *)i; - IRQ_HANDLER[i].m_func = default_isr; - } - - /* configure interrupts for IRQ mode */ - PUT_REG( REG_INTMODE, 0x0); - /* clear any pending interrupts */ - PUT_REG( REG_INTPEND, 0x1FFFFF); - - lastdec = 0; - - /* install interrupt handler for timer */ - IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp; - IRQ_HANDLER[INT_TIMER0].m_func = timer_isr; - - return 0; -} -#endif - int timer_init (void) { #if defined(CONFIG_NETARM) @@ -137,29 +76,6 @@ int timer_init (void) /* set timer 2 counter */ lastdec = TIMER_LOAD_VAL; -#elif defined(CONFIG_S3C4510B) - /* configure free running timer 0 */ - PUT_REG( REG_TMOD, 0x0); - /* Stop timer 0 */ - CLR_REG( REG_TMOD, TM0_RUN); - - /* Configure for interval mode */ - CLR_REG( REG_TMOD, TM1_TOGGLE); - - /* - * Load Timer data register with count down value. - * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ - */ - PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ)); - - /* - * Enable global interrupt - * Enable timer0 interrupt - */ - CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0))); - - /* Start timer */ - SET_REG( REG_TMOD, TM0_RUN); #elif defined(CONFIG_TEGRA) /* No timer routines for tegra as yet */ lastdec = 0; @@ -237,26 +153,6 @@ void udelay_masked (unsigned long usec) } while (diff >= 0); } -#elif defined(CONFIG_S3C4510B) - -ulong get_timer (ulong base) -{ - return timestamp - base; -} - -void __udelay (unsigned long usec) -{ - u32 ticks; - - ticks = (usec * CONFIG_SYS_HZ) / 1000000; - - ticks += get_timer (0); - - while (get_timer (0) < ticks) - /*NOP*/; - -} - #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No timer routines for IntegratorAP/CM720T as yet */ #elif defined(CONFIG_TEGRA) |