diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 45 |
1 files changed, 36 insertions, 9 deletions
@@ -2248,7 +2248,7 @@ Configuration Settings: - CONFIG_SYS_MONITOR_BASE: Physical start address of boot monitor code (set by make config files to be same as the text base address - (TEXT_BASE) used when linking) - same as + (CONFIG_SYS_TEXT_BASE) used when linking) - same as CONFIG_SYS_FLASH_BASE when booting from flash. - CONFIG_SYS_MONITOR_LEN: @@ -2275,6 +2275,19 @@ Configuration Settings: all data for the Linux kernel must be between "bootm_low" and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. +- CONFIG_SYS_BOOT_RAMDISK_HIGH: + Enable initrd_high functionality. If defined then the + initrd_high feature is enabled and the bootm ramdisk subcommand + is enabled. + +- CONFIG_SYS_BOOT_GET_CMDLINE: + Enables allocating and saving kernel cmdline in space between + "bootm_low" and "bootm_low" + BOOTMAPSZ. + +- CONFIG_SYS_BOOT_GET_KBD: + Enables allocating and saving a kernel copy of the bd_info in + space between "bootm_low" and "bootm_low" + BOOTMAPSZ. + - CONFIG_SYS_MAX_FLASH_BANKS: Max number of Flash memory banks @@ -2534,18 +2547,32 @@ to save the current settings. - CONFIG_ENV_SIZE: These two #defines specify the offset and size of the environment - area within the first NAND device. + area within the first NAND device. CONFIG_ENV_OFFSET must be + aligned to an erase block boundary. - - CONFIG_ENV_OFFSET_REDUND + - CONFIG_ENV_OFFSET_REDUND (optional): This setting describes a second storage area of CONFIG_ENV_SIZE - size used to hold a redundant copy of the environment data, - so that there is a valid backup copy in case there is a - power failure during a "saveenv" operation. + size used to hold a redundant copy of the environment data, so + that there is a valid backup copy in case there is a power failure + during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be + aligned to an erase block boundary. + + - CONFIG_ENV_RANGE (optional): + + Specifies the length of the region in which the environment + can be written. This should be a multiple of the NAND device's + block size. Specifying a range with more erase blocks than + are needed to hold CONFIG_ENV_SIZE allows bad blocks within + the range to be avoided. + + - CONFIG_ENV_OFFSET_OOB (optional): - Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned - to a block boundary, and CONFIG_ENV_SIZE must be a multiple of - the NAND devices block size. + Enables support for dynamically retrieving the offset of the + environment from block zero's out-of-band data. The + "nand env.oob" command can be used to record this offset. + Currently, CONFIG_ENV_OFFSET_REDUND is not supported when + using CONFIG_ENV_OFFSET_OOB. - CONFIG_NAND_ENV_DST |