diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 23 |
1 files changed, 23 insertions, 0 deletions
@@ -423,6 +423,11 @@ The following options need to be configured: CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. + CONFIG_SYS_FSL_SINGLE_SOURCE_CLK + Single Source Clock is clocking mode present in some of FSL SoC's. + In this mode, a single differential clock is used to supply + clocks to the sysclock, ddrclock and usbclock. + - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN @@ -2751,6 +2756,12 @@ CBFS (Coreboot Filesystem) support Define this option to use the Bank addr/Extended addr support on SPI flashes which has size > 16Mbytes. + CONFIG_SF_DUAL_FLASH Dual flash memories + + Define this option to use dual flash support where two flash + memories can be connected with a given cs line. + currently Xilinx Zynq qspi support these type of connections. + - SystemACE Support: CONFIG_SYSTEMACE @@ -3267,6 +3278,9 @@ FIT uImage format: Defines the size and behavior of the NAND that SPL uses to read U-Boot + CONFIG_SPL_NAND_BOOT + Add support NAND boot + CONFIG_SYS_NAND_U_BOOT_OFFS Location in NAND to read U-Boot from @@ -5252,6 +5266,15 @@ when your kernel is intended to use an initial ramdisk: Load Address: 0x00000000 Entry Point: 0x00000000 +The "dumpimage" is a tool to disassemble images built by mkimage. Its "-i" +option performs the converse operation of the mkimage's second form (the "-d" +option). Given an image built by mkimage, the dumpimage extracts a "data file" +from the image: + + tools/dumpimage -i image -p position data_file + -i ==> extract from the 'image' a specific 'data_file', \ + indexed by 'position' + Installing a Linux Image: ------------------------- |