diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 15 |
1 files changed, 13 insertions, 2 deletions
@@ -1509,6 +1509,15 @@ The following options need to be configured: Bus on the MPC8260. But it should be not so difficult to add this option to other architectures. + CONFIG_SOFT_I2C_READ_REPEATED_START + + defining this will force the i2c_read() function in + the soft_i2c driver to perform an I2C repeated start + between writing the address pointer and reading the + data. If this define is omitted the default behaviour + of doing a stop-start sequence will be used. Most I2C + devices can use either method, but some require one or + the other. - SPI Support: CONFIG_SPI @@ -2036,6 +2045,9 @@ Configuration Settings: - CONFIG_SYS_LONGHELP: Defined when you want long help messages included; undefine this when you're short of memory. +- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default + width of the commands listed in the 'help' command output. + - CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to prompt for user input. @@ -3009,8 +3021,7 @@ Some configuration options can be set using Environment Variables: Useful on scripts which control the retry operation themselves. - npe_ucode - see CONFIG_IXP4XX_NPE_EXT_UCOD - if set load address for the NPE microcode + npe_ucode - set load address for the NPE microcode tftpsrcport - If this is set, the value is used for TFTP's UDP source port. |