diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 163 | 
1 files changed, 63 insertions, 100 deletions
| @@ -5,10 +5,10 @@  # SPDX-License-Identifier:	GPL-2.0+  # -VERSION = 2013 -PATCHLEVEL = 10 +VERSION = 2014 +PATCHLEVEL = 01  SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1  ifneq "$(SUBLEVEL)" ""  U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)  else @@ -65,11 +65,9 @@ endif  # the object files are placed in the source directory.  # -ifdef O  ifeq ("$(origin O)", "command line")  BUILD_DIR := $(O)  endif -endif  # Call a source code checker (by default, "sparse") as part of the  # C compilation. @@ -138,7 +136,6 @@ unexport CDPATH  # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC  # is "yes"), so compile examples after U-Boot is compiled.  SUBDIR_TOOLS = tools -SUBDIR_EXAMPLES = examples/standalone examples/api  SUBDIRS = $(SUBDIR_TOOLS)  .PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE) @@ -152,8 +149,10 @@ all:  sinclude $(obj)include/autoconf.mk.dep  sinclude $(obj)include/autoconf.mk +SUBDIR_EXAMPLES-y := examples/standalone +SUBDIR_EXAMPLES-$(CONFIG_API) += examples/api  ifndef CONFIG_SANDBOX -SUBDIRS += $(SUBDIR_EXAMPLES) +SUBDIRS += $(SUBDIR_EXAMPLES-y)  endif  # load ARCH, BOARD, and CPU configuration @@ -231,87 +230,67 @@ OBJS := $(addprefix $(obj),$(OBJS))  HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n) -LIBS-y += lib/libgeneric.o -LIBS-y += lib/rsa/librsa.o -LIBS-y += lib/lzma/liblzma.o -LIBS-y += lib/lzo/liblzo.o -LIBS-y += lib/zlib/libz.o -LIBS-$(CONFIG_TIZEN) += lib/tizen/libtizen.o -LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o -LIBS-y += $(CPUDIR)/lib$(CPU).o +LIBS-y += lib/ +LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ +LIBS-y += $(CPUDIR)/  ifdef SOC -LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o -endif -ifeq ($(CPU),ixp) -LIBS-y += drivers/net/npe/libnpe.o +LIBS-y += $(CPUDIR)/$(SOC)/  endif -LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o -LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o -LIBS-y += fs/libfs.o \ -	fs/fat/libfat.o -LIBS-y += net/libnet.o -LIBS-y += disk/libdisk.o -LIBS-y += drivers/libdrivers.o -LIBS-y += drivers/dma/libdma.o -LIBS-y += drivers/gpio/libgpio.o -LIBS-y += drivers/i2c/libi2c.o -LIBS-y += drivers/input/libinput.o -LIBS-y += drivers/mmc/libmmc.o -LIBS-y += drivers/mtd/libmtd.o -LIBS-y += drivers/mtd/nand/libnand.o -LIBS-y += drivers/mtd/onenand/libonenand.o -LIBS-y += drivers/mtd/ubi/libubi.o -LIBS-y += drivers/mtd/spi/libspi_flash.o -LIBS-y += drivers/net/libnet.o -LIBS-y += drivers/net/phy/libphy.o -LIBS-y += drivers/pci/libpci.o -LIBS-y += drivers/power/libpower.o \ -	drivers/power/fuel_gauge/libfuel_gauge.o \ -	drivers/power/mfd/libmfd.o \ -	drivers/power/pmic/libpmic.o \ -	drivers/power/battery/libbattery.o -LIBS-y += drivers/spi/libspi.o -ifeq ($(CPU),mpc83xx) -LIBS-y += drivers/qe/libqe.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -ifeq ($(CPU),mpc85xx) -LIBS-y += drivers/qe/libqe.o -LIBS-y += drivers/net/fm/libfm.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -ifeq ($(CPU),mpc86xx) -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -LIBS-y += drivers/serial/libserial.o -LIBS-y += drivers/usb/eth/libusb_eth.o -LIBS-y += drivers/usb/gadget/libusb_gadget.o -LIBS-y += drivers/usb/host/libusb_host.o -LIBS-y += drivers/usb/musb/libusb_musb.o -LIBS-y += drivers/usb/musb-new/libusb_musb-new.o -LIBS-y += drivers/usb/phy/libusb_phy.o -LIBS-y += drivers/usb/ulpi/libusb_ulpi.o -LIBS-y += common/libcommon.o -LIBS-y += lib/libfdt/libfdt.o -LIBS-y += api/libapi.o -LIBS-y += post/libpost.o -LIBS-y += test/libtest.o +LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/ +LIBS-$(CONFIG_OF_EMBED) += dts/ +LIBS-y += arch/$(ARCH)/lib/ +LIBS-y += fs/ +LIBS-y += net/ +LIBS-y += disk/ +LIBS-y += drivers/ +LIBS-y += drivers/dma/ +LIBS-y += drivers/gpio/ +LIBS-y += drivers/i2c/ +LIBS-y += drivers/input/ +LIBS-y += drivers/mmc/ +LIBS-y += drivers/mtd/ +LIBS-y += drivers/mtd/nand/ +LIBS-y += drivers/mtd/onenand/ +LIBS-y += drivers/mtd/ubi/ +LIBS-y += drivers/mtd/spi/ +LIBS-y += drivers/net/ +LIBS-y += drivers/net/phy/ +LIBS-y += drivers/pci/ +LIBS-y += drivers/power/ \ +	drivers/power/fuel_gauge/ \ +	drivers/power/mfd/ \ +	drivers/power/pmic/ \ +	drivers/power/battery/ +LIBS-y += drivers/spi/ +LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/ +LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ +LIBS-y += drivers/serial/ +LIBS-y += drivers/usb/eth/ +LIBS-y += drivers/usb/gadget/ +LIBS-y += drivers/usb/host/ +LIBS-y += drivers/usb/musb/ +LIBS-y += drivers/usb/musb-new/ +LIBS-y += drivers/usb/phy/ +LIBS-y += drivers/usb/ulpi/ +LIBS-y += common/ +LIBS-y += lib/libfdt/ +LIBS-$(CONFIG_API) += api/ +LIBS-y += post/ +LIBS-y += test/  ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) -LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o +LIBS-y += arch/$(ARCH)/imx-common/  endif -LIBS-$(CONFIG_ARM) += arch/arm/cpu/libcpu.o +LIBS-$(CONFIG_ARM) += arch/arm/cpu/ +LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/ + +LIBS-y += board/$(BOARDDIR)/ +LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y))  LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))  .PHONY : $(LIBS) -LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o -LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) -  # Add GCC lib  ifdef USE_PRIVATE_LIBGCC  ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") @@ -335,7 +314,7 @@ LDPPFLAGS += \  	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')  __OBJS := $(subst $(obj),,$(OBJS)) -__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) +__LIBS := $(subst $(obj),,$(LIBS))  #########################################################################  ######################################################################### @@ -380,7 +359,7 @@ endif  build := -f $(TOPDIR)/scripts/Makefile.build -C -all:		$(ALL-y) $(SUBDIR_EXAMPLES) +all:		$(ALL-y) $(SUBDIR_EXAMPLES-y)  $(obj)u-boot.dtb:	checkdtc $(obj)u-boot  		$(MAKE) $(build) dts binary @@ -549,7 +528,7 @@ GEN_UBOOT = \  endif  $(obj)u-boot:	depend \ -		$(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds +		$(SUBDIR_TOOLS) $(OBJS) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds  		$(GEN_UBOOT)  ifeq ($(CONFIG_KALLSYMS),y)  		smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \ @@ -564,16 +543,11 @@ $(OBJS):  $(LIBS):	depend $(SUBDIR_TOOLS)  		$(MAKE) $(build) $(dir $(subst $(obj),,$@)) -		mv $(dir $@)built-in.o $@ - -$(LIBBOARD):	depend $(LIBS) -		$(MAKE) $(build) $(dir $(subst $(obj),,$@)) -		mv $(dir $@)built-in.o $@  $(SUBDIRS):	depend  		$(MAKE) -C $@ all -$(SUBDIR_EXAMPLES): $(obj)u-boot +$(SUBDIR_EXAMPLES-y): $(obj)u-boot  $(LDSCRIPT):	depend  		$(MAKE) -C $(dir $@) $(notdir $@) @@ -593,9 +567,6 @@ $(obj)spl/u-boot-spl.bin:	$(SUBDIR_TOOLS) depend  $(obj)tpl/u-boot-tpl.bin:	$(SUBDIR_TOOLS) depend  		$(MAKE) -C spl all CONFIG_TPL_BUILD=y -updater: -		$(MAKE) -C tools/updater all -  # Explicitly make _depend in subdirs containing multiple targets to prevent  # parallel sub-makes creating .depend files simultaneously.  depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE) \ @@ -634,7 +605,7 @@ SYSTEM_MAP = \  		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \  		LC_ALL=C sort  $(obj)System.map:	$(obj)u-boot -		@$(call SYSTEM_MAP,$<) > $(obj)System.map +		@$(call SYSTEM_MAP,$<) > $@  checkthumb:  	@if test $(call cc-version) -lt 0404; then \ @@ -738,7 +709,7 @@ else	# !config.mk  all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \  $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \  $(filter-out tools,$(SUBDIRS)) \ -updater depend dep tags ctags etags cscope $(obj)System.map: +depend dep tags ctags etags cscope $(obj)System.map:  	@echo "System not configured - see README" >&2  	@ exit 1 @@ -806,12 +777,6 @@ sinclude $(obj).boards.depend  $(obj).boards.depend:	boards.cfg  	@awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE)" }' $< > $@ -# -# Functions to generate common board directory names -# -lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') -ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') -  #########################################################################  ######################################################################### @@ -888,8 +853,6 @@ clobber:	tidy  	@rm -f $(obj)MLO MLO.byteswap  	@rm -f $(obj)SPL  	@rm -f $(obj)tools/xway-swap-bytes -	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c -	@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c  	@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm  	@rm -fr $(obj)include/generated  	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f |