summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--CHANGELOG130
-rw-r--r--doc/README.sata24
-rw-r--r--drivers/block/libata.c8
-rw-r--r--include/libata.h14
-rw-r--r--include/part.h8
5 files changed, 157 insertions, 27 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 278bb33a2..d5eae562a 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,133 @@
+commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:55:32 2008 +0800
+
+ drivers: add the support for Freescale SATA controller
+
+ Add the Freescale on-chip SATA controller driver to u-boot,
+ The SATA controller is used on the 837x and 8315 targets,
+ The driver can be used to load kernel, fs and dtb.
+
+ The features list:
+ - 1.5/3 Gbps link speed
+ - LBA48, LBA28 support
+ - DMA and FPDMA support
+ - Two ports support
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:54:44 2008 +0800
+
+ ata: add the readme for SATA command line
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit cd54081cd479e542fc399b8a40651ff11a1ad849
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:53:24 2008 +0800
+
+ ata: enable the sata initialize on boot up
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:52:36 2008 +0800
+
+ ata: add the fis struct for SATA
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:51:44 2008 +0800
+
+ ata: add the libata support
+
+ add simple libata support in u-boot
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 8e9bb43429e50df55fa41932cbe65841ff579220
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:50:45 2008 +0800
+
+ ata: make the ata_piix driver using new SATA framework
+
+ original ata_piix driver is using IDE framework, not real
+ SATA framework. For now, the ata_piix driver is only used
+ by x86 sc520_cdp board. This patch makes the ata_piix driver
+ use the new SATA framework, so
+
+ - remove the duplicated command stuff
+ - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
+ - add the CONFIG_CMD_SATA define to sc520_cdp.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:49:44 2008 +0800
+
+ ata: add the support for SATA framework
+
+ - add the SATA framework
+ - add the SATA command line
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:48:18 2008 +0800
+
+ ata: merge the header of ata_piix driver
+
+ move the sata.h from include/ to drivers/block/ata_piix.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 9eef62804d9695425b24c87b46a61a7fa74afee0
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:47:06 2008 +0800
+
+ ata: merge the ata_piix driver
+
+ move the cmd_sata.c from common/ to drivers/ata_piix.c,
+ the cmd_sata.c have some part of ata_piix controller drivers.
+ consolidate the driver to have better framework.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 15:38:47 2008 +0100
+
+ Coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Wed Mar 26 13:02:13 2008 +0100
+
+ Add CFG_RTC_DS1337_NOOSC to turn off OSC output
+
+ The default settings for RTC DS1337 keeps the OSC
+ output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
+ turn it off.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 11:48:46 2008 +0100
+
+ Cleanup coding style, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Mar 26 10:40:12 2008 +0100
diff --git a/doc/README.sata b/doc/README.sata
index 3e2c6e831..168dc7f54 100644
--- a/doc/README.sata
+++ b/doc/README.sata
@@ -9,10 +9,10 @@
=> sata info
-SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
- Type: Hard Disk
- Supports 48-bit addressing
- Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
+SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
+ Type: Hard Disk
+ Supports 48-bit addressing
+ Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
1.1 How to save the kernel, filesystem, dtb to SATA hard disk with raw?
@@ -48,16 +48,16 @@ SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
U-boot doesn't support ext2 write to hard disk, so
you have to write the image to hard disk under Linux env,
- before you load image from ext2 filesystem.
+ before you load image from ext2 filesystem.
=> ext2ls sata 0:1 /
- <DIR> 4096 .
- <DIR> 4096 ..
- <DIR> 16384 lost+found
- 1352023 uImage.837x
- 3646377 ramdisk.837x
- 12288 mpc837xemds.dtb
- 12 hello.txt
+ <DIR> 4096 .
+ <DIR> 4096 ..
+ <DIR> 16384 lost+found
+ 1352023 uImage.837x
+ 3646377 ramdisk.837x
+ 12288 mpc837xemds.dtb
+ 12 hello.txt
=> ext2load sata 0:1 200000 /uImage.837x
diff --git a/drivers/block/libata.c b/drivers/block/libata.c
index a0cf90d9a..bbe16a228 100644
--- a/drivers/block/libata.c
+++ b/drivers/block/libata.c
@@ -109,7 +109,7 @@ void ata_dump_id(u16 *id)
n_sectors = ata_id_n_sectors(id);
printf("Capablity: %d sectors\n\r", n_sectors);
- printf("id[49]: capabilities ==0x%04x\n"
+ printf ("id[49]: capabilities ==0x%04x\n"
"id[53]: field valid ==0x%04x\n"
"id[63]: mwdma ==0x%04x\n"
"id[64]: pio ==0x%04x\n"
@@ -120,14 +120,14 @@ void ata_dump_id(u16 *id)
id[64],
id[75]);
- printf("id[76]: sata capablity ==0x%04x\n"
+ printf ("id[76]: sata capablity ==0x%04x\n"
"id[78]: sata features supported ==0x%04x\n"
"id[79]: sata features enable ==0x%04x\n",
id[76],
id[78],
id[79]);
- printf("id[80]: major version ==0x%04x\n"
+ printf ("id[80]: major version ==0x%04x\n"
"id[81]: minor version ==0x%04x\n"
"id[82]: command set supported 1 ==0x%04x\n"
"id[83]: command set supported 2 ==0x%04x\n"
@@ -137,7 +137,7 @@ void ata_dump_id(u16 *id)
id[82],
id[83],
id[84]);
- printf("id[85]: command set enable 1 ==0x%04x\n"
+ printf ("id[85]: command set enable 1 ==0x%04x\n"
"id[86]: command set enable 2 ==0x%04x\n"
"id[87]: command set default ==0x%04x\n"
"id[88]: udma ==0x%04x\n"
diff --git a/include/libata.h b/include/libata.h
index a5d1c4fac..aedba743e 100644
--- a/include/libata.h
+++ b/include/libata.h
@@ -168,13 +168,13 @@ enum {
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
-#define ata_id_u32(id,n) \
- (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
-#define ata_id_u64(id,n) \
- ( ((u64) (id)[(n) + 3] << 48) | \
- ((u64) (id)[(n) + 2] << 32) | \
- ((u64) (id)[(n) + 1] << 16) | \
- ((u64) (id)[(n) + 0]) )
+#define ata_id_u32(id,n) \
+ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n) \
+ ( ((u64) (id)[(n) + 3] << 48) | \
+ ((u64) (id)[(n) + 2] << 32) | \
+ ((u64) (id)[(n) + 1] << 16) | \
+ ((u64) (id)[(n) + 0]) )
static inline unsigned int ata_id_major_version(const u16 *id)
diff --git a/include/part.h b/include/part.h
index cb1b75833..b22a637dd 100644
--- a/include/part.h
+++ b/include/part.h
@@ -27,8 +27,8 @@
typedef struct block_dev_desc {
int if_type; /* type of the interface */
- int dev; /* device number */
- unsigned char part_type; /* partition type */
+ int dev; /* device number */
+ unsigned char part_type; /* partition type */
unsigned char target; /* target SCSI ID */
unsigned char lun; /* target LUN */
unsigned char type; /* device type */
@@ -36,9 +36,9 @@ typedef struct block_dev_desc {
#ifdef CONFIG_LBA48
unsigned char lba48; /* device can use 48bit addr (ATA/ATAPI v7) */
#endif
- lbaint_t lba; /* number of blocks */
+ lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */
- char vendor [40+1]; /* IDE model, SCSI Vendor */
+ char vendor [40+1]; /* IDE model, SCSI Vendor */
char product[20+1]; /* IDE Serial no, SCSI product */
char revision[8+1]; /* firmware revision */
unsigned long (*block_read)(int dev,
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 16:56:58 +0000