diff options
| -rw-r--r-- | common/cmd_nand.c | 16 | ||||
| -rw-r--r-- | doc/README.nand | 10 |
2 files changed, 26 insertions, 0 deletions
diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 27a88796e..b767cd287 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -575,6 +575,16 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) else ret = nand_write_skip_bad(nand, off, &rwsize, (u_char *)addr, 0); +#ifdef CONFIG_CMD_NAND_TRIMFFS + } else if (!strcmp(s, ".trimffs")) { + if (read) { + printf("Unknown nand command suffix '%s'\n", s); + return 1; + } + ret = nand_write_skip_bad(nand, off, &rwsize, + (u_char *)addr, + WITH_DROP_FFS); +#endif #ifdef CONFIG_CMD_NAND_YAFFS } else if (!strcmp(s, ".yaffs")) { if (read) { @@ -689,6 +699,12 @@ U_BOOT_CMD( "nand write - addr off|partition size\n" " read/write 'size' bytes starting at offset 'off'\n" " to/from memory address 'addr', skipping bad blocks.\n" +#ifdef CONFIG_CMD_NAND_TRIMFFS + "nand write.trimffs - addr off|partition size\n" + " write 'size' bytes starting at offset 'off' from memory address\n" + " 'addr', skipping bad blocks and dropping any pages at the end\n" + " of eraseblocks that contain only 0xFF\n" +#endif #ifdef CONFIG_CMD_NAND_YAFFS "nand write.yaffs - addr off|partition size\n" " write 'size' bytes starting at offset 'off' with yaffs format\n" diff --git a/doc/README.nand b/doc/README.nand index 8eedb6c4d..751b69384 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -78,6 +78,16 @@ Commands: should work well, but loading an image copied from another flash is going to be trouble if there are any bad blocks. + nand write.trimffs addr ofs|partition size + Enabled by the CONFIG_CMD_NAND_TRIMFFS macro. This command will write to + the NAND flash in a manner identical to the 'nand write' command + described above -- with the additional check that all pages at the end + of eraseblocks which contain only 0xff data will not be written to the + NAND flash. This behaviour is required when flashing UBI images + containing UBIFS volumes as per the UBI FAQ[1]. + + [1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_flasher_algo + nand write.oob addr ofs|partition size Write `size' bytes from `addr' to the out-of-band data area corresponding to `ofs' in NAND flash. This is limited to the 16 bytes |