diff options
| -rw-r--r-- | .gitignore | 4 | ||||
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/lib/board.c | 6 | ||||
| -rw-r--r-- | board/freescale/m5271evb/Makefile | 8 | ||||
| -rw-r--r-- | board/freescale/m5271evb/config.mk | 9 | ||||
| -rw-r--r-- | board/freescale/m5271evb/m5271evb.c | 115 | ||||
| -rw-r--r-- | board/freescale/m5271evb/u-boot.lds | 85 | ||||
| -rw-r--r-- | board/highbank/highbank.c | 14 | ||||
| -rw-r--r-- | board/idmr/Makefile | 8 | ||||
| -rw-r--r-- | board/idmr/config.mk | 9 | ||||
| -rw-r--r-- | board/idmr/flash.c | 342 | ||||
| -rw-r--r-- | board/idmr/idmr.c | 152 | ||||
| -rw-r--r-- | board/idmr/u-boot.lds | 82 | ||||
| -rw-r--r-- | boards.cfg | 2 | ||||
| -rw-r--r-- | doc/README.scrapyard | 16 | ||||
| -rw-r--r-- | drivers/block/ahci.c | 7 | ||||
| -rw-r--r-- | drivers/video/cfb_console.c | 8 | ||||
| -rw-r--r-- | include/configs/M5271EVB.h | 234 | ||||
| -rw-r--r-- | include/configs/idmr.h | 240 |
19 files changed, 42 insertions, 1301 deletions
diff --git a/.gitignore b/.gitignore index ffe0cc710..cba5eac2a 100644 --- a/.gitignore +++ b/.gitignore @@ -51,6 +51,10 @@ /spl/* /tpl/ +# +# Generated include files +# +/include/config/ /include/generated/ /include/spl-autoconf.mk /include/tpl-autoconf.mk @@ -1022,7 +1022,7 @@ define filechk_timestamp.h LC_ALL=C date +'#define U_BOOT_TIME "%T"') endef -$(version_h): $(srctree)/Makefile FORCE +$(version_h): include/config/uboot.release FORCE $(call filechk,version.h) $(timestamp_h): $(srctree)/Makefile FORCE diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index e9a7708ce..92e85c4db 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -33,6 +33,7 @@ #include <nand.h> #include <onenand_uboot.h> #include <mmc.h> +#include <scsi.h> #include <libfdt.h> #include <fdtdec.h> #include <post.h> @@ -593,6 +594,11 @@ void board_init_r(gd_t *id, ulong dest_addr) mmc_initialize(gd->bd); #endif +#ifdef CONFIG_CMD_SCSI + puts("SCSI: "); + scsi_init(); +#endif + #ifdef CONFIG_HAS_DATAFLASH AT91F_DataflashInit(); dataflash_print_info(); diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile deleted file mode 100644 index 77138c607..000000000 --- a/board/freescale/m5271evb/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = m5271evb.o diff --git a/board/freescale/m5271evb/config.mk b/board/freescale/m5271evb/config.mk deleted file mode 100644 index 957f58488..000000000 --- a/board/freescale/m5271evb/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xffe00000 diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c deleted file mode 100644 index 5981a2711..000000000 --- a/board/freescale/m5271evb/m5271evb.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/immap.h> - -int checkboard (void) { - puts ("Board: Freescale M5271EVB\n"); - return 0; -}; - -phys_size_t initdram (int board_type) { - - int i; - - /* Enable Address lines 23-21 and lower 16bits of data path */ - mbar_writeByte(MCF_GPIO_PAR_AD, MCF_GPIO_AD_ADDR23 | - MCF_GPIO_AD_ADDR22 | MCF_GPIO_AD_ADDR21 | - MCF_GPIO_AD_DATAL); - - /* Set CS2 pin to be SD_CS0 */ - mbar_writeByte(MCF_GPIO_PAR_CS, mbar_readByte(MCF_GPIO_PAR_CS) - | MCF_GPIO_PAR_CS_PAR_CS2); - - /* Configure SDRAM Control Pin Assignemnt Register */ - mbar_writeByte(MCF_GPIO_PAR_SDRAM, MCF_GPIO_SDRAM_CSSDCS_00 | - MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS | - MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE | - MCF_GPIO_SDRAM_SDCS_11); - asm(" nop"); - - /* - * Check to see if the SDRAM has already been initialized - * by a run control tool - */ - if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) { - /* Initialize DRAM Control Register: DCR */ - mbar_writeShort(MCF_SDRAMC_DCR, - MCF_SDRAMC_DCR_RTIM(2) - | MCF_SDRAMC_DCR_RC(0x2E)); - asm(" nop"); - - /* - * Initialize DACR0 - * - * CASL: 01 - * CBM: cmd at A20, bank select bits 21 and up - * PS: 32bit port size - */ - mbar_writeLong(MCF_SDRAMC_DACR0, - MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) - | MCF_SDRAMC_DACRn_CASL(1) - | MCF_SDRAMC_DACRn_CBM(3) - | MCF_SDRAMC_DACRn_PS(0)); - asm(" nop"); - - /* Initialize DMR0 */ - mbar_writeLong(MCF_SDRAMC_DMR0, - MCF_SDRAMC_DMRn_BAM_16M - | MCF_SDRAMC_DMRn_V); - asm(" nop"); - - /* Set IP bit in DACR */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_IP); - asm(" nop"); - - /* Wait at least 20ns to allow banks to precharge */ - for (i = 0; i < 5; i++) - asm(" nop"); - - /* Write to this block to initiate precharge */ - *(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5; - asm(" nop"); - - /* Set RE bit in DACR */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_RE); - - /* Wait for at least 8 auto refresh cycles to occur */ - for (i = 0; i < 2000; i++) - asm(" nop"); - - /* Finish the configuration by issuing the MRS */ - mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0) - | MCF_SDRAMC_DACRn_MRS); - asm(" nop"); - - /* - * Write to the SDRAM Mode Register A0-A11 = 0x400 - * - * Write Burst Mode = Programmed Burst Length - * Op Mode = Standard Op - * CAS Latency = 2 - * Burst Type = Sequential - * Burst Length = 1 - */ - *(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5; - asm(" nop"); - } - - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -}; - -int testdram (void) { - - /* TODO: XXX XXX XXX */ - printf ("DRAM test not implemented!\n"); - - return (0); -} diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds deleted file mode 100644 index 3defcd25c..000000000 --- a/board/freescale/m5271evb/u-boot.lds +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(m68k) - -SECTIONS -{ - .text : - { - arch/m68k/cpu/mcf52x2/start.o (.text*) - - . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.ppcenv) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - - .reloc : - { - __got_start = .; - KEEP(*(.got)) - __got_end = .; - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - _sbss = .; - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - _ebss = .; - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index 371b0a2b1..a1b67494f 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -51,17 +51,23 @@ int board_eth_init(bd_t *bis) return rc; } -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) +#ifdef CONFIG_SCSI_AHCI_PLAT +void scsi_init(void) { - char envbuffer[16]; - u32 boot_choice; u32 reg = readl(HB_SREG_A9_PWRDOM_STAT); if (reg & PWRDOM_STAT_SATA) { ahci_init(HB_AHCI_BASE); scsi_scan(1); } +} +#endif + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + char envbuffer[16]; + u32 boot_choice; boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff; sprintf(envbuffer, "bootcmd%d", boot_choice); diff --git a/board/idmr/Makefile b/board/idmr/Makefile deleted file mode 100644 index 67c2384c7..000000000 --- a/board/idmr/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = idmr.o flash.o diff --git a/board/idmr/config.mk b/board/idmr/config.mk deleted file mode 100644 index 840a37e85..000000000 --- a/board/idmr/config.mk +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE = 0xff800000 diff --git a/board/idmr/flash.c b/board/idmr/flash.c deleted file mode 100644 index 52eb105c3..000000000 --- a/board/idmr/flash.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE -#define FLASH_BANK_SIZE 0x800000 -#define EN29LV640 0x227e227e - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case (EN29LV640 & FLASH_TYPEMASK): - printf ("EN29LV640 (16Mbit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - goto Done; - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 5) == 0) { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - - Done: - return; -} - - -unsigned long flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - flash_info[i].flash_id = - (AMD_MANUFACT & FLASH_VENDMASK) | - (EN29LV640 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic ("configured to many flash banks!\n"); - - for (j = 0; j < flash_info[i].sector_count; j++) { - flash_info[i].start[j] = flashbase + 0x10000 * j; - } - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + 0x2ffff, &flash_info[0]); - - return size; -} - - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1))) - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define READY 1 -#define ERR 2 -#define TMO 4 - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - ulong result; - int iflag, prot, sect; - int rc = ERR_OK; - int chip1; - ulong start; - - /* first look for protection bits */ - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; - - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } - - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - iflag = disable_interrupts (); - - printf ("\n"); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - if (info->protect[sect] == 0) { /* not protected */ - volatile u16 *addr = - (volatile u16 *) (info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip1 = 0; - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; - } - - if (!chip1 - && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; - - } while (!chip1); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip1 == ERR) { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) { - rc = ERR_TIMOUT; - goto outahere; - } - - printf ("ok.\n"); - } else { /* it was protected */ - - printf ("protected!\n"); - } - } - - if (ctrlc ()) - printf ("User Interrupt!\n"); - - outahere: - /* allow flash to settle - wait 10 ms */ - printf("Waiting 10 ms..."); - udelay (10000); - -/* for (i = 0; i < 10 * 1000 * 1000; ++i) - asm(" nop"); -*/ - - printf("done\n"); - if (iflag) - enable_interrupts (); - - - return rc; -} - -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile u16 *addr = (volatile u16 *) dest; - ulong result; - int rc = ERR_OK; - int iflag; - int chip1; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - chip1 = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; - - } while (!chip1); - - *addr = CMD_READ_ARRAY; - - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - return rc; -} - - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong wp, data; - int rc; - - if (addr & 1) { - printf ("unaligned destination not supported\n"); - return ERR_ALIGN; - } - -#if 0 - if (cnt & 1) { - printf ("odd transfer sizes not supported\n"); - return ERR_ALIGN; - } -#endif - - wp = addr; - - if (addr & 1) { - data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) - src); - if ((rc = write_word (info, wp - 1, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - while (cnt >= 2) { - data = *((volatile u16 *) src); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 1) { - data = (*((volatile u8 *) src) << 8) | - *((volatile u8 *) (wp + 1)); - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - src += 1; - wp += 1; - cnt -= 1; - } - - return ERR_OK; -} diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c deleted file mode 100644 index 73660d802..000000000 --- a/board/idmr/idmr.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/immap.h> - -int checkboard (void) { - puts ("Board: iDMR\n"); - return 0; -}; - -phys_size_t initdram (int board_type) { - int i; - - /* - * After reset, CS0 is configured to cover entire address space. We - * need to configure it to its proper values, so that writes to - * CONFIG_SYS_SDRAM_BASE and vicinity during SDRAM controller setup below do - * now fall under CS0 (see 16.3.1 of the MCF5271 Reference Manual). - */ - - /* Flash chipselect, CS0 */ - /* ;CSAR0: Flash at 0xFF800000 */ - mbar_writeShort(0x0080, 0xFF80); - - /* CSCR0: Flash 6 waits, 16bit */ - mbar_writeShort(0x008A, 0x1980); - - /* CSMR0: Flash 8MB, R/W, valid */ - mbar_writeLong(0x0084, 0x007F0001); - - - /* - * SDRAM configuration proper - */ - - /* - * Address/Data Pin Assignment Reg.: enable address lines 23-21; do - * not enable data pins D[15:0], as we have 16 bit port to SDRAM - */ - mbar_writeByte(MCF_GPIO_PAR_AD, - MCF_GPIO_AD_ADDR23 | - MCF_GPIO_AD_ADDR22 | - MCF_GPIO_AD_ADDR21); - - /* No need to configure BS pins - reset values are OK */ - - /* Chip Select Pin Assignment Reg.: set CS[1-7] to GPIO */ - mbar_writeByte(MCF_GPIO_PAR_CS, 0x00); - - /* SDRAM Control Pin Assignment Reg. */ - mbar_writeByte(MCF_GPIO_PAR_SDRAM, - MCF_GPIO_SDRAM_CSSDCS_00 | /* no matter: PAR_CS=0 */ - MCF_GPIO_SDRAM_SDWE | - MCF_GPIO_SDRAM_SCAS | - MCF_GPIO_SDRAM_SRAS | - MCF_GPIO_SDRAM_SCKE | - MCF_GPIO_SDRAM_SDCS_01); - - /* - * Wait 100us. We run the bus at 50MHz, one cycle is 20ns. So 5 - * iterations will do, but we do 10 just to be safe. - */ - for (i = 0; i < 10; ++i) - asm(" nop"); - - - /* 1. Initialize DRAM Control Register: DCR */ - mbar_writeShort(MCF_SDRAMC_DCR, - MCF_SDRAMC_DCR_RTIM(0x10) | /* 65ns */ - MCF_SDRAMC_DCR_RC(0x60)); /* 1562 cycles */ - - - /* - * 2. Initialize DACR0 - * - * CL: 11 (CL=3: 0x03, 0x02; CL=2: 0x1) - * CBM: cmd at A20, bank select bits 21 and up - * PS: 16 bit - */ - mbar_writeLong(MCF_SDRAMC_DACR0, - MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) | - MCF_SDRAMC_DACRn_BA(0x00) | - MCF_SDRAMC_DACRn_CASL(0x03) | - MCF_SDRAMC_DACRn_CBM(0x03) | - MCF_SDRAMC_DACRn_PS(0x03)); - - /* Initialize DMR0 */ - mbar_writeLong(MCF_SDRAMC_DMR0, - MCF_SDRAMC_DMRn_BAM_16M | - MCF_SDRAMC_DMRn_V); - - - /* 3. Set IP bit in DACR to initiate PALL command */ - mbar_writeLong(MCF_SDRAMC_DACR0, - mbar_readLong(MCF_SDRAMC_DACR0) | - MCF_SDRAMC_DACRn_IP); - - /* Write to this block to initiate precharge */ - *(volatile u16 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5; - - /* - * Wait at least 20ns to allow banks to precharge (t_RP = 20ns). We - * wait a wee longer, just to be safe. - */ - for (i = 0; i < 5; ++i) - asm(" nop"); - - - /* 4. Set RE bit in DACR */ - mbar_writeLong(MCF_SDRAMC_DACR0, - mbar_readLong(MCF_SDRAMC_DACR0) | - MCF_SDRAMC_DACRn_RE); - - /* - * Wait for at least 8 auto refresh cycles to occur, i.e. at least - * 781 bus cycles. - */ - for (i = 0; i < 1000; ++i) - asm(" nop"); - - /* Finish the configuration by issuing the MRS */ - mbar_writeLong(MCF_SDRAMC_DACR0, - mbar_readLong(MCF_SDRAMC_DACR0) | - MCF_SDRAMC_DACRn_MRS); - - /* - * Write to the SDRAM Mode Register A0-A11 = 0x400 - * - * Write Burst Mode = Programmed Burst Length - * Op Mode = Standard Op - * CAS Latency = 3 - * Burst Type = Sequential - * Burst Length = 1 - */ - *(volatile u32 *)(CONFIG_SYS_SDRAM_BASE + 0x1800) = 0xa5a5a5a5; - - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -}; - - -int testdram (void) { - - /* TODO: XXX XXX XXX */ - printf ("DRAM test not implemented!\n"); - - return (0); -} diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds deleted file mode 100644 index 4071f70d4..000000000 --- a/board/idmr/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(m68k) - -SECTIONS -{ - .text : - { - arch/m68k/cpu/mcf52x2/start.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - - .reloc : - { - __got_start = .; - KEEP(*(.got)) - __got_end = .; - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - _sbss = .; - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - _ebss = .; - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index 23dfddaa0..f36c3b49a 100644 --- a/boards.cfg +++ b/boards.cfg @@ -453,7 +453,6 @@ Active m68k mcf5227x - freescale m52277evb Active m68k mcf5227x - freescale m52277evb M52277EVB_stmicro M52277EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000 TsiChung Liew <Tsi-Chung.Liew@freescale.com> Active m68k mcf523x - freescale m5235evb M5235EVB M5235EVB:SYS_TEXT_BASE=0xFFE00000 TsiChung Liew <Tsi-Chung.Liew@freescale.com> Active m68k mcf523x - freescale m5235evb M5235EVB_Flash32 M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000 TsiChung Liew <Tsi-Chung.Liew@freescale.com> -Active m68k mcf52x2 - - - idmr - - Active m68k mcf52x2 - - cobra5272 cobra5272 - - Active m68k mcf52x2 - BuS eb_cpu5282 eb_cpu5282 eb_cpu5282:SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400 Jens Scharsig <esw@bus-elektronik.de> Active m68k mcf52x2 - BuS eb_cpu5282 eb_cpu5282_internal eb_cpu5282:SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418 Jens Scharsig <esw@bus-elektronik.de> @@ -462,7 +461,6 @@ Active m68k mcf52x2 - freescale m5208evbe Active m68k mcf52x2 - freescale m5249evb M5249EVB - - Active m68k mcf52x2 - freescale m5253demo M5253DEMO - TsiChung Liew <Tsi-Chung.Liew@freescale.com> Active m68k mcf52x2 - freescale m5253evbe M5253EVBE - Hayden Fraser <Hayden.Fraser@freescale.com> -Active m68k mcf52x2 - freescale m5271evb M5271EVB - - Active m68k mcf52x2 - freescale m5272c3 M5272C3 - - Active m68k mcf52x2 - freescale m5275evb M5275EVB - - Active m68k mcf52x2 - freescale m5282evb M5282EVB - - diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 6b41445fa..7d670339d 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,13 +11,15 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -dvl_host arm ixp - 2014-01-28 Michael Schwingen <michael@schwingen.org> -actux4 arm ixp - 2014-01-28 Michael Schwingen <michael@schwingen.org> -actux3 arm ixp - 2014-01-28 Michael Schwingen <michael@schwingen.org> -actux2 arm ixp - 2014-01-28 Michael Schwingen <michael@schwingen.org> -actux1 arm ixp - 2014-01-28 Michael Schwingen <michael@schwingen.org> -mx1ads arm arm920t - 2014-01-13 -mini2440 arm arm920t - 2014-01-13 Gabriel Huau <contact@huau-gabriel.fr> +idmr m68k mcf52x2 - 2014-01-28 +M5271EVB m68k mcf52x2 - 2014-01-28 +dvl_host arm ixp e317de6b 2014-01-28 Michael Schwingen <michael@schwingen.org> +actux4 arm ixp 6ff7aafa 2014-01-28 Michael Schwingen <michael@schwingen.org> +actux3 arm ixp 38da33f3 2014-01-28 Michael Schwingen <michael@schwingen.org> +actux2 arm ixp 13e0ee7f 2014-01-28 Michael Schwingen <michael@schwingen.org> +actux1 arm ixp 373ee048 2014-01-28 Michael Schwingen <michael@schwingen.org> +mx1ads arm arm920t e570aca9 2014-01-13 +mini2440 arm arm920t af5b9b1f 2014-01-13 Gabriel Huau <contact@huau-gabriel.fr> omap730p2 arm arm926ejs 79c5c08d 2013-11-11 pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger <wg@grandegger.com> pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de> diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index e64df4f98..a409f6377 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -41,7 +41,7 @@ u16 *ataid[AHCI_MAX_PORTS]; #define WAIT_MS_SPINUP 20000 #define WAIT_MS_DATAIO 5000 #define WAIT_MS_FLUSH 5000 -#define WAIT_MS_LINKUP 4 +#define WAIT_MS_LINKUP 40 static inline u32 ahci_port_base(u32 base, u32 port) { @@ -930,6 +930,11 @@ int ahci_init(u32 base) err_out: return rc; } + +void __weak scsi_init(void) +{ +} + #endif /* diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 6db407359..b52e9edd2 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1473,7 +1473,11 @@ int video_display_bitmap(ulong bmp_image, int x, int y) printf("Error: malloc in gunzip failed!\n"); return 1; } - if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE, + /* + * NB: we need to force offset of +2 + * See doc/README.displaying-bmps + */ + if (gunzip(dst+2, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE-2, (uchar *) bmp_image, &len) != 0) { printf("Error: no valid bmp or bmp.gz image at %lx\n", @@ -1489,7 +1493,7 @@ int video_display_bitmap(ulong bmp_image, int x, int y) /* * Set addr to decompressed image */ - bmp = (bmp_image_t *) dst; + bmp = (bmp_image_t *)(dst+2); if (!((bmp->header.signature[0] == 'B') && (bmp->header.signature[1] == 'M'))) { diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h deleted file mode 100644 index a9531b0bf..000000000 --- a/include/configs/M5271EVB.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * Configuation settings for the Freescale M5271EVB - * - * Based on MC5272C3 and r5200 board configs - * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> - * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M5271EVB_H -#define _M5271EVB_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5271 /* define processor type */ -#define CONFIG_M5271EVB /* define board type */ - -#define CONFIG_MCFTMR - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 115200 - -#undef CONFIG_WATCHDOG /* disable watchdog */ - -/* Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash - */ -#ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_ENV_OFFSET 0x4000 -#else -#define CONFIG_ENV_ADDR 0xffe04000 -#endif -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PING -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC - -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMDLINE_EDITING 1 /* enables command line history */ -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ - -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -# define CONFIG_MII 1 -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC0_PINMUX 0 -# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 80000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ -#define CONFIG_BOOTFILE "u-boot.bin" -#ifdef CONFIG_MCFFEC -# define CONFIG_NET_RETRY_COUNT 5 -# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME M5271EVB -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "loadaddr=10000\0" \ - "uboot=u-boot.bin\0" \ - "load=tftp $loadaddr $uboot\0" \ - "upd=run load; run prog\0" \ - "prog=prot off ffe00000 ffe3ffff;" \ - "era ffe00000 ffe3ffff;" \ - "cp.b $loadaddr ffe00000 $filesize;" \ - "save\0" \ - "" - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_MEMTEST_START 0x400 -#define CONFIG_SYS_MEMTEST_END 0x380000 - -#define CONFIG_SYS_HZ 1000000 - -/* Clock configuration - * The external oscillator is a 25.000 MHz - * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk) - * bus_clk = (cpu_clk/2) (fixed ratio) - * - * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to - * match the new clock speed. Max cpu_clk is 150 MHz. - */ -#define CONFIG_SYS_CLK 100000000 -#define CONFIG_SYS_MCF_SYNCR (MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */ - -/* - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 - -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - -#define CONFIG_SYS_MONITOR_LEN 0x40000 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) - -/* FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 - -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_SIZE 0x200000 - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ - CF_CACR_DISD | CF_CACR_INVI | \ - CF_CACR_CEIB | CF_CACR_DCM | \ - CF_CACR_EUSP) - -/* Chip Select 0 : Boot Flash */ -#define CONFIG_SYS_CS0_BASE 0xFFE00000 -#define CONFIG_SYS_CS0_MASK 0x001F0001 -#define CONFIG_SYS_CS0_CTRL 0x00001980 - -/* Chip Select 1 : External SRAM */ -#define CONFIG_SYS_CS1_BASE 0x30000000 -#define CONFIG_SYS_CS1_MASK 0x00070001 -#define CONFIG_SYS_CS1_CTRL 0x00001900 - -#endif /* _M5271EVB_H */ diff --git a/include/configs/idmr.h b/include/configs/idmr.h deleted file mode 100644 index b882cf069..000000000 --- a/include/configs/idmr.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - * Configuration settings for the iDMR board - * - * Based on MC5272C3, r5200 and M5271EVB board configs - * (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> - * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _IDMR_H -#define _IDMR_H - - -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5271 /* define processor type */ -#define CONFIG_IDMR /* define board type */ - -#undef CONFIG_WATCHDOG /* disable watchdog */ - -/* - * Default environment settings - */ -#define CONFIG_BOOTCOMMAND "run net_nfs" -#define CONFIG_BOOTDELAY 5 -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CONFIG_ETHADDR 00:06:3b:01:41:55 -#define CONFIG_ETHPRIME -#define CONFIG_IPADDR 192.168.30.1 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_ROOTPATH "" -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_HOSTNAME idmr -#define CONFIG_BOOTFILE "/tftpboot/idmr/uImage" -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root " \ - "filesystem over NFS; echo" - -#define CONFIG_MCFTMR - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "ethact=FEC\0 " \ - "update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; " \ - "cp.b 200000 ff800000 $(filesize);" \ - "prot on ff800000 ff81ffff\0" \ - "load=tftp 200000 $(u-boot)\0" \ - "u-boot=/tftpboot/idmr/u-boot.bin\0" \ - "" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NET - -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB - - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/* - * Configuration for environment, which occupies third sector in flash. - */ -#ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_ENV_ADDR 0xff820000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_IS_IN_FLASH -#else /* CONFIG_MONITOR_IS_IN_RAM */ -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_IS_IN_FLASH -#endif /* !CONFIG_MONITOR_IS_IN_RAM */ - -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_MEMTEST_START 0x400 -#define CONFIG_SYS_MEMTEST_END 0x380000 - -#define CONFIG_SYS_HZ (50000000 / 64) -#define CONFIG_SYS_CLK 100000000 - -#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */ - -/* - * Ethernet - */ -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -# define CONFIG_MII 1 -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC0_PINMUX 0 -# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -/* - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xff800000 - -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else /* !CONFIG_MONITOR_IS_IN_RAM */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif /* CONFIG_MONITOR_IS_IN_RAM */ - -#define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) - -/* FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 - -#define CONFIG_SYS_FLASH_SIZE 0x800000 -/* - * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - */ - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ - CF_CACR_DISD | CF_CACR_INVI | \ - CF_CACR_CEIB | CF_CACR_DCM | \ - CF_CACR_EUSP) - -/* Port configuration */ -#define CONFIG_SYS_FECI2C 0xF0 - - -/* Dynamic MTD partition support */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=idmr-0" - -#define MTDPARTS_DEFAULT "mtdparts=idmr-0:128k(u-boot)," \ - "64k(env)," \ - "640k(kernel)," \ - "2m(rootfs)," \ - "-(user)"; - -#if defined(CONFIG_CMD_MII) -#error "MII commands don't work on iDMR board and should not be enabled." -#endif - -#endif /* _IDMR_H */ |