diff options
| -rw-r--r-- | MAINTAINERS | 4 | ||||
| -rwxr-xr-x | MAKEALL | 1 | ||||
| -rw-r--r-- | Makefile | 1 | ||||
| -rw-r--r-- | board/logicpd/imx27lite/imx27lite.c | 18 | ||||
| -rw-r--r-- | include/configs/imx27lite-common.h | 237 | ||||
| -rw-r--r-- | include/configs/imx27lite.h | 200 | ||||
| -rw-r--r-- | include/configs/magnesium.h | 71 |
7 files changed, 335 insertions, 197 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a5d5835d6..4e6d73511 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -738,6 +738,10 @@ Jens Scharsig <esw@bus-elektronik.de> eb_cpux9k2 ARM920T (AT91RM9200 SoC) +Heiko Schocher <hs@denx.de> + + magnesium i.MX27 + Robert Schwebel <r.schwebel@pengutronix.de> csb226 xscale @@ -569,6 +569,7 @@ LIST_ARM9=" \ edb9315a \ imx27lite \ lpd7a400 \ + magnesium \ mv88f6281gtw_ge \ mx1ads \ mx1fs2 \ @@ -2940,6 +2940,7 @@ davinci_dm365evm_config : unconfig davinci_dm6467evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +magnesium_config \ imx27lite_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c index 63375d5da..442741547 100644 --- a/board/logicpd/imx27lite/imx27lite.c +++ b/board/logicpd/imx27lite/imx27lite.c @@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE; +#if defined(CONFIG_SYS_NAND_LARGEPAGE) + struct system_control_regs *sc_regs = + (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; +#endif gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -43,9 +47,20 @@ int board_init (void) ®s->port[PORTC].dr); #endif #ifdef CONFIG_MXC_MMC +#if defined(CONFIG_MAGNESIUM) + mx27_sd1_init_pins(); +#else mx27_sd2_init_pins(); #endif +#endif +#if defined(CONFIG_SYS_NAND_LARGEPAGE) + /* + * set in FMCR NF_FMS Bit(5) to 1 + * (NAND Flash with 2 Kbyte page size) + */ + writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr); +#endif return 0; } @@ -68,6 +83,7 @@ int dram_init (void) int checkboard(void) { - printf("LogicPD imx27lite\n"); + puts ("Board: "); + puts(CONFIG_BOARDNAME); return 0; } diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h new file mode 100644 index 000000000..1da860261 --- /dev/null +++ b/include/configs/imx27lite-common.h @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2010 Heiko Schocher <hs@denx.de> + * + * based on: + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMX27LITE_COMMON_CONFIG_H +#define __IMX27LITE_COMMON_CONFIG_H + +/* + * SoC Configuration + */ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_MX27 +#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Lowlevel configuration + */ +#define SDRAM_ESDCFG_REGISTER_VAL(cas) \ + (ESDCFG_TRC(10) | \ + ESDCFG_TRCD(3) | \ + ESDCFG_TCAS(cas) | \ + ESDCFG_TRRD(1) | \ + ESDCFG_TRAS(5) | \ + ESDCFG_TWR | \ + ESDCFG_TMRD(2) | \ + ESDCFG_TRP(2) | \ + ESDCFG_TXP(3)) + +#define SDRAM_ESDCTL_REGISTER_VAL \ + (ESDCTL_PRCT(0) | \ + ESDCTL_BL | \ + ESDCTL_PWDT(0) | \ + ESDCTL_SREFR(3) | \ + ESDCTL_DSIZ_32 | \ + ESDCTL_COL10 | \ + ESDCTL_ROW13 | \ + ESDCTL_SDE) + +#define SDRAM_ALL_VAL 0xf00 + +#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ +#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 + +#define MPCTL0_VAL 0x1ef15d5 + +#define SPCTL0_VAL 0x043a1c09 + +#define CSCR_VAL 0x33f08107 + +#define PCDR0_VAL 0x120470c3 +#define PCDR1_VAL 0x03030303 +#define PCCR0_VAL 0xffffffff +#define PCCR1_VAL 0xfffffffc + +#define AIPI1_PSR0_VAL 0x20040304 +#define AIPI1_PSR1_VAL 0xdffbfcfb +#define AIPI2_PSR0_VAL 0x07ffc200 +#define AIPI2_PSR1_VAL 0xffffffff + +/* + * Memory Info + */ +/* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) +/* reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +/* memtest start address */ +#define CONFIG_SYS_MEMTEST_START 0xA0000000 +#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ +#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ + +/* + * Serial Driver info + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX27_UART1 +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Flash & Environment + */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +/* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +/* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +/* CS2 Base address */ +#define PHYS_FLASH_1 0xc0000000 +/* Flash Base for U-Boot */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ + CONFIG_SYS_FLASH_SECT_SZ) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* + * Ethernet + */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0x1f +#define CONFIG_MII +#define CONFIG_NET_MULTI + +/* + * MTD + */ +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_DEVICE + +/* + * NAND + */ +#define CONFIG_NAND_MXC +#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0xd8000000 +#define CONFIG_JFFS2_NAND +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +/* + * SD/MMC + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MXC_MMC +#define CONFIG_DOS_PARTITION + +/* + * MTD partitions + */ +#define CONFIG_CMD_MTDPARTS + +/* + * U-Boot general configuration + */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print buffer sz */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "kernel_addr_r=a0800000\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "rootpath=/opt/eldk-4.2-arm/arm\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm\0" \ + "bootcmd=run net_nfs\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};cp.b ${fileaddr} " \ + xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + +#endif /* __IMX27LITE_COMMON_CONFIG_H */ diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h index ee749ecd2..72f6e80ed 100644 --- a/include/configs/imx27lite.h +++ b/include/configs/imx27lite.h @@ -20,158 +20,31 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* include common defines/options for all imx27lite related boards */ +#include "imx27lite-common.h" /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_MX27 #define CONFIG_IMX27LITE -#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Lowlevel configuration - */ -#define SDRAM_ESDCFG_REGISTER_VAL(cas) \ - (ESDCFG_TRC(10) | \ - ESDCFG_TRCD(3) | \ - ESDCFG_TCAS(cas) | \ - ESDCFG_TRRD(1) | \ - ESDCFG_TRAS(5) | \ - ESDCFG_TWR | \ - ESDCFG_TMRD(2) | \ - ESDCFG_TRP(2) | \ - ESDCFG_TXP(3)) - -#define SDRAM_ESDCTL_REGISTER_VAL \ - (ESDCTL_PRCT(0) | \ - ESDCTL_BL | \ - ESDCTL_PWDT(0) | \ - ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ_32 | \ - ESDCTL_COL10 | \ - ESDCTL_ROW13 | \ - ESDCTL_SDE) - -#define SDRAM_ALL_VAL 0xf00 - -#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ -#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 - -#define MPCTL0_VAL 0x1ef15d5 - -#define SPCTL0_VAL 0x043a1c09 - -#define CSCR_VAL 0x33f08107 - -#define PCDR0_VAL 0x120470c3 -#define PCDR1_VAL 0x03030303 -#define PCCR0_VAL 0xffffffff -#define PCCR1_VAL 0xfffffffc - -#define AIPI1_PSR0_VAL 0x20040304 -#define AIPI1_PSR1_VAL 0xdffbfcfb -#define AIPI2_PSR0_VAL 0x07ffc200 -#define AIPI2_PSR1_VAL 0xffffffff - -/* - * Memory Info - */ -/* malloc() len */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) -/* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 -/* memtest start address */ -#define CONFIG_SYS_MEMTEST_START 0xA0000000 -#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ -#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ - -/* - * Serial Driver info - */ -#define CONFIG_MXC_UART -#define CONFIG_SYS_MX27_UART1 -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_HOSTNAME imx27 +#define CONFIG_BOARDNAME "LogicPD imx27lite\n" /* * Flash & Environment */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -/* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -/* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ #define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */ -/* end of flash */ #define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000) -/* CS2 Base address */ -#define PHYS_FLASH_1 0xc0000000 -/* Flash Base for U-Boot */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -/* Flash size 2MB */ #define PHYS_FLASH_SIZE 0x200000 -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ - CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ #define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Ethernet - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x1f -#define CONFIG_MII -#define CONFIG_NET_MULTI - -/* - * MTD - */ -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_MTD_DEVICE - -/* - * NAND - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0xd8000000 -#define CONFIG_JFFS2_NAND -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* * SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MXC_MMC #define CONFIG_MXC_MCI_REGS_BASE 0x10014000 -#define CONFIG_DOS_PARTITION /* * MTD partitions */ -#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" #define MTDPARTS_DEFAULT \ "mtdparts=" \ @@ -186,69 +59,4 @@ "22m(rootfs)," \ "-(userfs)" -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print buffer sz */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define xstr(s) str(s) -#define str(s) #s - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "u-boot=imx27/u-boot.bin\0" \ - "kernel_addr_r=a0800000\0" \ - "hostname=imx27\0" \ - "bootfile=imx27/uImage\0" \ - "rootpath=/opt/eldk-4.2-arm/arm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm\0" \ - "bootcmd=run net_nfs\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};cp.b ${fileaddr} " \ - xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - #endif /* __CONFIG_H */ diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h new file mode 100644 index 000000000..4fb7744ba --- /dev/null +++ b/include/configs/magnesium.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2010 Heiko Schocher <hs@denx.de> + * + * based on: + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* include common defines/options for all imx27lite related boards */ +#include "imx27lite-common.h" + +/* + * SoC Configuration + */ +#define CONFIG_MAGNESIUM +#define CONFIG_HOSTNAME magnesium +#define CONFIG_BOARDNAME "Projectiondesign magnesium\n" + +/* + * Flash & Environment + */ +#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */ +#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000) +#define PHYS_FLASH_SIZE 0x800000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */ + +/* + * NAND + */ +#define CONFIG_SYS_NAND_LARGEPAGE + +/* + * SD/MMC + */ +#define CONFIG_MXC_MCI_REGS_BASE 0x10013000 + +/* + * MTD partitions + */ +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=" \ + "physmap-flash.0:" \ + "256k(U-Boot)," \ + "7680k(user)," \ + "128k(env1)," \ + "128k(env2);" \ + "mxc_nand.0:" \ + "128k(IPL-SPL)," \ + "4m(kernel)," \ + "22m(rootfs)," \ + "-(userfs)" + +#endif /* __CONFIG_H */ |