diff options
| -rw-r--r-- | CHANGELOG | 6 | ||||
| -rw-r--r-- | README | 9 | ||||
| -rw-r--r-- | board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross | 15 | ||||
| -rw-r--r-- | board/RPXClassic/Makefile | 2 | ||||
| -rw-r--r-- | board/RPXClassic/eccx.c | 353 | ||||
| -rw-r--r-- | board/eltec/bab7xx/asm_init.S | 2 | ||||
| -rw-r--r-- | board/trab/trab.c | 41 | ||||
| -rw-r--r-- | board/trab/vfd.c | 5 | ||||
| -rw-r--r-- | common/cmd_pcmcia.c | 2 | ||||
| -rw-r--r-- | common/devices.c | 2 | ||||
| -rw-r--r-- | common/main.c | 15 | ||||
| -rw-r--r-- | drivers/Makefile | 2 | ||||
| -rw-r--r-- | drivers/cfb_console.c | 155 | ||||
| -rw-r--r-- | drivers/sed13806.c | 306 | ||||
| -rw-r--r-- | include/configs/KUP4K.h | 4 | ||||
| -rw-r--r-- | include/configs/RPXClassic.h | 65 | ||||
| -rw-r--r-- | include/devices.h | 2 | ||||
| -rw-r--r-- | include/sed13806.h | 98 | ||||
| -rw-r--r-- | lib_arm/board.c | 11 | ||||
| -rw-r--r-- | post/memory.c | 2 | ||||
| -rw-r--r-- | tools/mkimage.c | 5 |
21 files changed, 999 insertions, 103 deletions
@@ -2,6 +2,12 @@ Changes since for U-Boot 0.1.0: ====================================================================== +* Fix startup problems with VFD display on TRAB + +* Patch by Pierre Aubert, 20 Nov 2002 + Add driver for Epson SED13806 graphic controller. + Add support for BMP logos in cfb_console driver. + * Added support for both PCMCIA slots (at the same time!) on MPC8xx * Patch by Rod Boyce, 21 Nov 2002: @@ -423,6 +423,9 @@ The following options need to be configured: (requires CFG_CMD_DATE) CONFIG_VIDEO_LOGO display Linux logo in upper left corner + CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of + linux_logo.h for logo. + Requires CONFIG_VIDEO_LOGO CONFIG_CONSOLE_EXTRA_INFO addional board info beside the logo @@ -710,6 +713,12 @@ The following options need to be configured: 16,7 Mill (24bit) 315 318 31b (i.e. setenv videomode 317; saveenv; reset;) + CONFIG_VIDEO_SED13806 + Enable Epson SED13806 driver. This driver supports 8bpp + and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP + or CONFIG_VIDEO_SED13806_16BPP + + - LCD Support: CONFIG_LCD Define this to enable LCD support (for output to LCD diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross index 6edfd76e1..56f3cd766 100644 --- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross +++ b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross @@ -30,6 +30,9 @@ # ############################################################################# +CC = $(CROSS_COMPILE)gcc +AR = $(CROSS_COMPILE)ar + TARGETLIB = libx86emu.a TARGETDEBUGLIB =libx86emud.a @@ -54,26 +57,26 @@ DEBUGOBJS=debug.d \ all: $(TARGETLIB) $(TARGETDEBUGLIB) $(TARGETLIB): $(OBJS) - ppc-elf32-ar rv $(TARGETLIB) $(OBJS) + $(AR) rv $(TARGETLIB) $(OBJS) $(TARGETDEBUGLIB): $(DEBUGOBJS) - ppc-elf32-ar rv $(TARGETDEBUGLIB) $(DEBUGOBJS) + $(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS) INCS = -I. -Ix86emu -I../../include CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char -fomit-frame-pointer -mrelocatable -ffixed-r14 -meabi -mrelocatable -ffixed-r14 -meabi CDEBUGFLAGS = -DDEBUG .c.o: - ppc-elf32-gcc -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c + $(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c .c.d: - ppc-elf32-gcc -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c + $(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c .cpp.o: - ppc-elf32-gcc -c $(CFLAGS) $(INCS) $*.cpp + $(CC) -c $(CFLAGS) $(INCS) $*.cpp clean: rm -f *.a *.o *.d validate: validate.o libx86emu.a - ppc-elf32-gcc -o validate validate.o -lx86emu -L. + $(CC) -o validate validate.o -lx86emu -L. diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile index ef173d036..857e9a880 100644 --- a/board/RPXClassic/Makefile +++ b/board/RPXClassic/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS = $(BOARD).o flash.o +OBJS = $(BOARD).o flash.o eccx.o $(LIB): .depend $(OBJS) $(AR) crv $@ $^ diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c new file mode 100644 index 000000000..d5edc2b19 --- /dev/null +++ b/board/RPXClassic/eccx.c @@ -0,0 +1,353 @@ +/* + * (C) Copyright 2002 + * Stäubli Faverges - <www.staubli.com> + * Pierre AUBERT p.aubert@staubli.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* Video support for the ECCX daughter board */ + + +#include <common.h> +#include <config.h> + +#ifdef CONFIG_VIDEO_SED13806 +#include <sed13806.h> + + + +/* Screen configurations: the initialization of the SD13806 depends on + screen and on display mode. We handle only 8bpp and 16 bpp modes */ + +/* ECCX board is supplied with a NEC NL6448BC20 screen */ +#ifdef CONFIG_NEC_NL6448BC20 +#define DISPLAY_WIDTH 640 +#define DISPLAY_HEIGHT 480 + +#ifdef CONFIG_VIDEO_SED13806_8BPP +static const S1D_REGS init_regs [] = +{ + {0x0001,0x00}, // Miscellaneous Register + {0x01FC,0x00}, // Display Mode Register + {0x0004,0x1b}, // General IO Pins Configuration Register 0 + {0x0005,0x00}, // General IO Pins Configuration Register 1 + {0x0008,0xe5}, // General IO Pins Control Register 0 + {0x0009,0x1f}, // General IO Pins Control Register 1 + {0x0010,0x02}, // Memory Clock Configuration Register + {0x0014,0x10}, // LCD Pixel Clock Configuration Register + {0x0018,0x02}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x02}, // MediaPlug Clock Configuration Register + {0x001E,0x01}, // CPU To Memory Wait State Select Register + {0x0021,0x04}, // DRAM Refresh Rate Register + {0x002A,0x00}, // DRAM Timings Control Register 0 + {0x002B,0x01}, // DRAM Timings Control Register 1 + {0x0020,0x80}, // Memory Configuration Register + {0x0030,0x25}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x4F}, // LCD Horizontal Display Width Register + {0x0034,0x13}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x0B}, // TFT FPLINE Pulse Width Register + {0x0038,0xDF}, // LCD Vertical Display Height Register 0 + {0x0039,0x01}, // LCD Vertical Display Height Register 1 + {0x003A,0x2C}, // LCD Vertical Non-Display Period Register + {0x003B,0x00}, // TFT FPFRAME Start Position Register + {0x003C,0x01}, // TFT FPFRAME Pulse Width Register + {0x0040,0x03}, // LCD Display Mode Register + {0x0041,0x02}, // LCD Miscellaneous Register + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + {0x0046,0x40}, // LCD Memory Address Offset Register 0 + {0x0047,0x01}, // LCD Memory Address Offset Register 1 + {0x0048,0x00}, // LCD Pixel Panning Register + {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register + {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register + {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register + {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register + {0x0053,0x01}, // CRT/TV HRTC Start Position Register + {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register + {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 + {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 + {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register + {0x0059,0x09}, // CRT/TV VRTC Start Position Register + {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register + {0x005B,0x00}, // TV Output Control Register + {0x0060,0x03}, // CRT/TV Display Mode Register + {0x0062,0x00}, // CRT/TV Display Start Address Register 0 + {0x0063,0x00}, // CRT/TV Display Start Address Register 1 + {0x0064,0x00}, // CRT/TV Display Start Address Register 2 + {0x0066,0x40}, // CRT/TV Memory Address Offset Register 0 + {0x0067,0x01}, // CRT/TV Memory Address Offset Register 1 + {0x0068,0x00}, // CRT/TV Pixel Panning Register + {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register + {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register + {0x0070,0x00}, // LCD Ink/Cursor Control Register + {0x0071,0x00}, // LCD Ink/Cursor Start Address Register + {0x0072,0x00}, // LCD Cursor X Position Register 0 + {0x0073,0x00}, // LCD Cursor X Position Register 1 + {0x0074,0x00}, // LCD Cursor Y Position Register 0 + {0x0075,0x00}, // LCD Cursor Y Position Register 1 + {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register + {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register + {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register + {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register + {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register + {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register + {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register + {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register + {0x0081,0x00}, // CRT/TV Ink/Cursor Start Address Register + {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 + {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 + {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 + {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 + {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register + {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register + {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register + {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register + {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register + {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register + {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register + {0x0100,0x00}, // BitBlt Control Register 0 + {0x0101,0x00}, // BitBlt Control Register 1 + {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register + {0x0103,0x00}, // BitBlt Operation Register + {0x0104,0x00}, // BitBlt Source Start Address Register 0 + {0x0105,0x00}, // BitBlt Source Start Address Register 1 + {0x0106,0x00}, // BitBlt Source Start Address Register 2 + {0x0108,0x00}, // BitBlt Destination Start Address Register 0 + {0x0109,0x00}, // BitBlt Destination Start Address Register 1 + {0x010A,0x00}, // BitBlt Destination Start Address Register 2 + {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 + {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 + {0x0110,0x00}, // BitBlt Width Register 0 + {0x0111,0x00}, // BitBlt Width Register 1 + {0x0112,0x00}, // BitBlt Height Register 0 + {0x0113,0x00}, // BitBlt Height Register 1 + {0x0114,0x00}, // BitBlt Background Color Register 0 + {0x0115,0x00}, // BitBlt Background Color Register 1 + {0x0118,0x00}, // BitBlt Foreground Color Register 0 + {0x0119,0x00}, // BitBlt Foreground Color Register 1 + {0x01E0,0x00}, // Look-Up Table Mode Register + {0x01E2,0x00}, // Look-Up Table Address Register + {0x01E4,0x00}, // Look-Up Table Data Register + {0x01F0,0x10}, // Power Save Configuration Register + {0x01F1,0x00}, // Power Save Status Register + {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register + {0x01FC,0x01}, // Display Mode Register + {0, 0} +}; +#endif /* CONFIG_VIDEO_SED13806_8BPP */ + +#ifdef CONFIG_VIDEO_SED13806_16BPP + +static const S1D_REGS init_regs [] = +{ + {0x0001,0x00}, // Miscellaneous Register + {0x01FC,0x00}, // Display Mode Register + {0x0004,0x1b}, // General IO Pins Configuration Register 0 + {0x0005,0x00}, // General IO Pins Configuration Register 1 + {0x0008,0xe5}, // General IO Pins Control Register 0 + {0x0009,0x1f}, // General IO Pins Control Register 1 + {0x0010,0x02}, // Memory Clock Configuration Register + {0x0014,0x10}, // LCD Pixel Clock Configuration Register + {0x0018,0x02}, // CRT/TV Pixel Clock Configuration Register + {0x001C,0x02}, // MediaPlug Clock Configuration Register + {0x001E,0x01}, // CPU To Memory Wait State Select Register + {0x0021,0x04}, // DRAM Refresh Rate Register + {0x002A,0x00}, // DRAM Timings Control Register 0 + {0x002B,0x01}, // DRAM Timings Control Register 1 + {0x0020,0x80}, // Memory Configuration Register + {0x0030,0x25}, // Panel Type Register + {0x0031,0x00}, // MOD Rate Register + {0x0032,0x4F}, // LCD Horizontal Display Width Register + {0x0034,0x13}, // LCD Horizontal Non-Display Period Register + {0x0035,0x01}, // TFT FPLINE Start Position Register + {0x0036,0x0B}, // TFT FPLINE Pulse Width Register + {0x0038,0xDF}, // LCD Vertical Display Height Register 0 + {0x0039,0x01}, // LCD Vertical Display Height Register 1 + {0x003A,0x2C}, // LCD Vertical Non-Display Period Register + {0x003B,0x00}, // TFT FPFRAME Start Position Register + {0x003C,0x01}, // TFT FPFRAME Pulse Width Register + {0x0040,0x05}, // LCD Display Mode Register + {0x0041,0x02}, // LCD Miscellaneous Register + {0x0042,0x00}, // LCD Display Start Address Register 0 + {0x0043,0x00}, // LCD Display Start Address Register 1 + {0x0044,0x00}, // LCD Display Start Address Register 2 + {0x0046,0x80}, // LCD Memory Address Offset Register 0 + {0x0047,0x02}, // LCD Memory Address Offset Register 1 + {0x0048,0x00}, // LCD Pixel Panning Register + {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register + {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register + {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register + {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register + {0x0053,0x01}, // CRT/TV HRTC Start Position Register + {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register + {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 + {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 + {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register + {0x0059,0x09}, // CRT/TV VRTC Start Position Register + {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register + {0x005B,0x00}, // TV Output Control Register + {0x0060,0x05}, // CRT/TV Display Mode Register + {0x0062,0x00}, // CRT/TV Display Start Address Register 0 + {0x0063,0x00}, // CRT/TV Display Start Address Register 1 + {0x0064,0x00}, // CRT/TV Display Start Address Register 2 + {0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 + {0x0067,0x02}, // CRT/TV Memory Address Offset Register 1 + {0x0068,0x00}, // CRT/TV Pixel Panning Register + {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register + {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register + {0x0070,0x00}, // LCD Ink/Cursor Control Register + {0x0071,0x00}, // LCD Ink/Cursor Start Address Register + {0x0072,0x00}, // LCD Cursor X Position Register 0 + {0x0073,0x00}, // LCD Cursor X Position Register 1 + {0x0074,0x00}, // LCD Cursor Y Position Register 0 + {0x0075,0x00}, // LCD Cursor Y Position Register 1 + {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register + {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register + {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register + {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register + {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register + {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register + {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register + {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register + {0x0081,0x00}, // CRT/TV Ink/Cursor Start Address Register + {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 + {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 + {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 + {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 + {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register + {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register + {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register + {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register + {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register + {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register + {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register + {0x0100,0x00}, // BitBlt Control Register 0 + {0x0101,0x00}, // BitBlt Control Register 1 + {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register + {0x0103,0x00}, // BitBlt Operation Register + {0x0104,0x00}, // BitBlt Source Start Address Register 0 + {0x0105,0x00}, // BitBlt Source Start Address Register 1 + {0x0106,0x00}, // BitBlt Source Start Address Register 2 + {0x0108,0x00}, // BitBlt Destination Start Address Register 0 + {0x0109,0x00}, // BitBlt Destination Start Address Register 1 + {0x010A,0x00}, // BitBlt Destination Start Address Register 2 + {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 + {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 + {0x0110,0x00}, // BitBlt Width Register 0 + {0x0111,0x00}, // BitBlt Width Register 1 + {0x0112,0x00}, // BitBlt Height Register 0 + {0x0113,0x00}, // BitBlt Height Register 1 + {0x0114,0x00}, // BitBlt Background Color Register 0 + {0x0115,0x00}, // BitBlt Background Color Register 1 + {0x0118,0x00}, // BitBlt Foreground Color Register 0 + {0x0119,0x00}, // BitBlt Foreground Color Register 1 + {0x01E0,0x01}, // Look-Up Table Mode Register + {0x01E2,0x00}, // Look-Up Table Address Register + {0x01E4,0x00}, // Look-Up Table Data Register + {0x01F0,0x10}, // Power Save Configuration Register + {0x01F1,0x00}, // Power Save Status Register + {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register + {0x01FC,0x01}, // Display Mode Register + {0, 0} +}; + +#endif /* CONFIG_VIDEO_SED13806_16BPP */ +#endif /* CONFIG_NEC_NL6448BC20 */ + + + +#ifdef CONFIG_CONSOLE_EXTRA_INFO + +/*----------------------------------------------------------------------------- + * video_get_info_str -- setup a board string: type, speed, etc. + * line_number= location to place info string beside logo + * info= buffer for info string + *----------------------------------------------------------------------------- + */ +void video_get_info_str (int line_number, char *info) +{ + if (line_number == 1) { + strcpy (info, " RPXClassic board"); + } + else { + info [0] = '\0'; + } + +} +#endif + +/*----------------------------------------------------------------------------- + * board_video_init -- init de l'EPSON, config du CS + *----------------------------------------------------------------------------- + */ +unsigned int board_video_init (void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + /* Program ECCX registers */ + *(ECCX_CSR12) |= ECCX_860; + *(ECCX_CSR8) |= ECCX_BE | ECCX_CS2; + *(ECCX_CSR8) |= ECCX_ENEPSON; + + memctl->memc_or2 = SED13806_OR; + memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES; + + return (SED13806_REG_ADDR); +} + +/*----------------------------------------------------------------------------- + * board_validate_screen -- + *----------------------------------------------------------------------------- + */ +void board_validate_screen (unsigned int base) +{ + /* Activate the panel bias power */ + *(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80; +} +/*----------------------------------------------------------------------------- + * board_get_regs -- + *----------------------------------------------------------------------------- + */ +const S1D_REGS *board_get_regs (void) +{ + return (init_regs); +} +/*----------------------------------------------------------------------------- + * board_get_width -- + *----------------------------------------------------------------------------- + */ +int board_get_width (void) +{ + return (DISPLAY_WIDTH); +} + +/*----------------------------------------------------------------------------- + * board_get_height -- + *----------------------------------------------------------------------------- + */ +int board_get_height (void) +{ + return (DISPLAY_HEIGHT); +} + +#endif /* CONFIG_VIDEO_SED13806 */ diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S index d739b8175..934fabe98 100644 --- a/board/eltec/bab7xx/asm_init.S +++ b/board/eltec/bab7xx/asm_init.S @@ -24,7 +24,7 @@ */ #include <config.h> -#include <mpc75x.h> +#include <74xx_7xx.h> #include <mpc106.h> #include <version.h> diff --git a/board/trab/trab.c b/board/trab/trab.c index 6a758b239..32f27efae 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -60,6 +60,12 @@ static void udelay_no_timer (int usec) int board_init () { +#if defined(CONFIG_MODEM_SUPPORT) && defined(CONFIG_VFD) + ulong size; + unsigned long addr; + extern void mem_malloc_init (ulong); + extern int drv_vfd_init(void); +#endif DECLARE_GLOBAL_DATA_PTR; /* memory and cpu-speed are setup before relocation */ @@ -102,25 +108,24 @@ int board_init () gd->bd->bi_boot_params = 0x0c000100; #ifdef CONFIG_MODEM_SUPPORT - /* This stuff is needed by the CPLD to read keyboard data. - * (Copied from the LCD initialization routine.) - */ - if (rLCDCON1 == 0) { - extern void init_grid_ctrl(void); - - rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA; - rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8; -#if 0 - rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA; +#ifdef CONFIG_VFD +#ifndef PAGE_SIZE +#define PAGE_SIZE 4096 #endif - rLCDCON2 = 0x000DC000; - rLCDCON3 = 0x0051000A; - rLCDCON4 = 0x00000001; - rLCDCON5 = 0x00000440; - rLCDCON1 = 0x00000B75; - - init_grid_ctrl(); - } + /* + * reserve memory for VFD display (always full pages) + */ + /* armboot_real_end is defined in the board-specific linker script */ + addr = (_armboot_real_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + size = vfd_setmem (addr); + gd->fb_base = addr; + /* round to the next page boundary */ + addr += size; + addr = (addr + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + mem_malloc_init (addr); + /* must do this after the framebuffer is allocated */ + drv_vfd_init(); +#endif /* CONFIG_VFD */ udelay_no_timer (KBD_MDELAY); diff --git a/board/trab/vfd.c b/board/trab/vfd.c index 1ea483f0c..7377b4df1 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -339,9 +339,14 @@ void transfer_pic(int display, unsigned char *adr, int height, int width) int drv_vfd_init(void) { ulong palette; + static int vfd_init_done = 0; DECLARE_GLOBAL_DATA_PTR; + if (vfd_init_done != 0) + return; + vfd_init_done = 1; + vfdbase = gd->fb_base; create_vfd_table(); init_grid_ctrl(); diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index 8b54585bf..4c799a52d 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -2062,7 +2062,7 @@ static int hardware_enable(int slot) /* * Power On. */ - printf("\n Slot %c:", 'A' + slot); + printf("%s Slot %c:", slot ? "" : "\n", 'A' + slot); mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot); reg = pcmp->pcmc_pipr; debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", diff --git a/common/devices.c b/common/devices.c index 7489eac41..8bd0e64e3 100644 --- a/common/devices.c +++ b/common/devices.c @@ -177,7 +177,7 @@ int devices_init (void) #ifdef CONFIG_LCD drv_lcd_init (); #endif -#ifdef CONFIG_VIDEO +#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) drv_video_init (); #endif #ifdef CONFIG_WL_4PPM_KEYBOARD diff --git a/common/main.c b/common/main.c index 08d54c5c1..3e92649ce 100644 --- a/common/main.c +++ b/common/main.c @@ -21,6 +21,8 @@ * MA 02111-1307 USA */ +/* #define DEBUG */ + #include <common.h> #include <watchdog.h> #include <command.h> @@ -304,9 +306,7 @@ void main_loop (void) s = getenv ("bootdelay"); bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY; -#if 0 - printf ("### main_loop entered:\n\n"); -#endif + debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay); # ifdef CONFIG_BOOT_RETRY_TIME s = getenv ("bootretry"); @@ -319,6 +319,9 @@ void main_loop (void) # endif /* CONFIG_BOOT_RETRY_TIME */ s = getenv ("bootcmd"); + + debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>"); + if (bootdelay >= 0 && s && !abortboot (bootdelay)) { # ifdef CONFIG_AUTOBOOT_KEYED int prev = disable_ctrlc(1); /* disable Control C checking */ @@ -337,11 +340,9 @@ void main_loop (void) } # ifdef CONFIG_MENUKEY - if (menukey == CONFIG_MENUKEY) - { + if (menukey == CONFIG_MENUKEY) { s = getenv("menucmd"); - if (s) - { + if (s) { # ifndef CFG_HUSH_PARSER run_command (s, bd, 0); # else diff --git a/drivers/Makefile b/drivers/Makefile index 3d3bbcef9..afea75224 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -31,7 +31,7 @@ OBJS = 3c589.o 5701rls.o bcm570x.o bcm570x_autoneg.o \ cfb_console.o cs8900.o dc2114x.o eepro100.o \ i8042.o natsemi.o ns16550.o ns8382x.o ns87308.o \ pci.o pci_auto.o pci_indirect.o \ - pcnet.o serial.o \ + pcnet.o sed13806.o serial.o \ smc91111.o smiLynxEM.o sym53c8xx.o \ tigon3.o w83c553f.o ct69000.o diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c index ee2fa9c84..d428b174e 100644 --- a/drivers/cfb_console.c +++ b/drivers/cfb_console.c @@ -65,6 +65,7 @@ CONFIG_CONSOLE_TIME - display time/date in upper right corner, needs CFG_CMD_DATE and CONFIG_CONSOLE_CURSOR CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner + CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo CONFIG_CONSOLE_EXTRA_INFO - display additional board information strings that normaly goes to serial port. This define requires a board specific function: @@ -93,6 +94,8 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the #ifdef CONFIG_CFB_CONSOLE +#include <malloc.h> + /*****************************************************************************/ /* Console device defines with SMI graphic */ /* Any other graphic must change this section */ @@ -116,6 +119,16 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the #endif /*****************************************************************************/ +/* Defines for the SED13806 driver */ +/*****************************************************************************/ +#ifdef CONFIG_VIDEO_SED13806 + +#define VIDEO_FB_LITTLE_ENDIAN +#define VIDEO_HW_RECTFILL +#define VIDEO_HW_BITBLT +#endif + +/*****************************************************************************/ /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */ /*****************************************************************************/ #include <video_fb.h> @@ -217,6 +230,14 @@ void console_cursor (int state); #endif /* CONFIG_VIDEO_HW_CURSOR */ #ifdef CONFIG_VIDEO_LOGO +#ifdef CONFIG_VIDEO_BMP_LOGO +#include <bmp_logo.h> +#define VIDEO_LOGO_WIDTH BMP_LOGO_WIDTH +#define VIDEO_LOGO_HEIGHT BMP_LOGO_HEIGHT +#define VIDEO_LOGO_LUT_OFFSET BMP_LOGO_OFFSET +#define VIDEO_LOGO_COLORS BMP_LOGO_COLORS + +#else /* CONFIG_VIDEO_BMP_LOGO */ #define LINUX_LOGO_WIDTH 80 #define LINUX_LOGO_HEIGHT 80 #define LINUX_LOGO_COLORS 214 @@ -225,13 +246,15 @@ void console_cursor (int state); #include <linux_logo.h> #define VIDEO_LOGO_WIDTH LINUX_LOGO_WIDTH #define VIDEO_LOGO_HEIGHT LINUX_LOGO_HEIGHT - +#define VIDEO_LOGO_LUT_OFFSET LINUX_LOGO_LUT_OFFSET +#define VIDEO_LOGO_COLORS LINUX_LOGO_COLORS +#endif /* CONFIG_VIDEO_BMP_LOGO */ #define VIDEO_INFO_X (VIDEO_LOGO_WIDTH) #define VIDEO_INFO_Y (VIDEO_FONT_HEIGHT/2) -#else +#else /* CONFIG_VIDEO_LOGO */ #define VIDEO_LOGO_WIDTH 0 #define VIDEO_LOGO_HEIGHT 0 -#endif +#endif /* CONFIG_VIDEO_LOGO */ #define VIDEO_COLS VIDEO_VISIBLE_COLS #define VIDEO_ROWS VIDEO_VISIBLE_ROWS @@ -463,11 +486,7 @@ static inline void video_drawstring(int xx, int yy, unsigned char *s) static void video_putchar(int xx, int yy, unsigned char c) { -#ifdef CONFIG_VIDEO_LOGO video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1); -#else - video_drawchars (xx, yy, &c, 1); -#endif } /*****************************************************************************/ @@ -676,83 +695,107 @@ void video_puts (const char *s) #ifdef CONFIG_VIDEO_LOGO void logo_plot (void *screen, int width, int x, int y) { - int skip = (width - LINUX_LOGO_WIDTH) * VIDEO_PIXEL_SIZE, + + int skip = (width - VIDEO_LOGO_WIDTH) * VIDEO_PIXEL_SIZE, xcount, i, - ycount = LINUX_LOGO_HEIGHT; + ycount = VIDEO_LOGO_HEIGHT; unsigned char - *source = linux_logo, + *source, *dest = (unsigned char *) screen + ((y * width * VIDEO_PIXEL_SIZE) + x), - r, g, b; + r, g, b, *logo_red, *logo_blue, *logo_green; +#ifdef CONFIG_VIDEO_BMP_LOGO + source = bmp_logo_bitmap; + + /* Allocate temporary space for computing colormap */ + logo_red = malloc (BMP_LOGO_COLORS); + logo_green = malloc (BMP_LOGO_COLORS); + logo_blue = malloc (BMP_LOGO_COLORS); + /* Compute color map */ + for (i = 0; i < VIDEO_LOGO_COLORS; i++) { + logo_red [i] = (bmp_logo_palette [i] & 0x0f00) >> 4; + logo_green [i] = (bmp_logo_palette [i] & 0x00f0); + logo_blue [i] = (bmp_logo_palette [i] & 0x000f) << 4; + } +#else + source = linux_logo; + logo_red = linux_logo_red; + logo_green = linux_logo_green; + logo_blue = linux_logo_blue; +#endif + if (VIDEO_DATA_FORMAT == GDF__8BIT_INDEX) { - for (i = 0; i < LINUX_LOGO_COLORS; i++) + for (i = 0; i < VIDEO_LOGO_COLORS; i++) { - r = (unsigned char)linux_logo_red [i]; - g = (unsigned char)linux_logo_green[i]; - b = (unsigned char)linux_logo_blue [i]; - video_set_lut (LINUX_LOGO_LUT_OFFSET + i, r, g, b); + video_set_lut (i + VIDEO_LOGO_LUT_OFFSET, + logo_red [i], logo_green [i], logo_blue [i]); } } while (ycount--) { - xcount = LINUX_LOGO_WIDTH; - while (xcount--) - { - r = (unsigned char)linux_logo_red [*source - LINUX_LOGO_LUT_OFFSET]; - g = (unsigned char)linux_logo_green[*source - LINUX_LOGO_LUT_OFFSET]; - b = (unsigned char)linux_logo_blue [*source - LINUX_LOGO_LUT_OFFSET]; - - switch (VIDEO_DATA_FORMAT) + xcount = VIDEO_LOGO_WIDTH; + while (xcount--) { - case GDF__8BIT_INDEX: - *dest = *source; - break; - case GDF__8BIT_332RGB: - *dest = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6); - break; - case GDF_15BIT_555RGB: - *(unsigned short *)dest = - SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3))); - break; - case GDF_16BIT_565RGB: - *(unsigned short *)dest = - SWAP16((unsigned short)(((r>>3)<<11) | ((g>>2)<<5) | (b>>3))); - break; - case GDF_32BIT_X888RGB: - *(unsigned long *)dest = - SWAP32((unsigned long)((r<<16) | (g<<8) | b)); - break; - case GDF_24BIT_888RGB: + r = logo_red [*source - VIDEO_LOGO_LUT_OFFSET]; + g = logo_green [*source - VIDEO_LOGO_LUT_OFFSET]; + b = logo_blue [*source - VIDEO_LOGO_LUT_OFFSET]; + + switch (VIDEO_DATA_FORMAT) + { + case GDF__8BIT_INDEX: + *dest = *source; + break; + case GDF__8BIT_332RGB: + *dest = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6); + break; + case GDF_15BIT_555RGB: + *(unsigned short *)dest = + SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3))); + break; + case GDF_16BIT_565RGB: + *(unsigned short *)dest = + SWAP16((unsigned short)(((r>>3)<<11) | ((g>>2)<<5) | (b>>3))); + break; + case GDF_32BIT_X888RGB: + *(unsigned long *)dest = + SWAP32((unsigned long)((r<<16) | (g<<8) | b)); + break; + case GDF_24BIT_888RGB: #ifdef VIDEO_FB_LITTLE_ENDIAN - dest[0] = b; - dest[1] = g; - dest[2] = r; + dest[0] = b; + dest[1] = g; + dest[2] = r; #else - dest[0] = r; - dest[1] = g; - dest[2] = b; + dest[0] = r; + dest[1] = g; + dest[2] = b; #endif - break; + break; + } + source++; + dest += VIDEO_PIXEL_SIZE; } - source++; - dest += VIDEO_PIXEL_SIZE; - } - dest += skip; + dest += skip; } +#ifdef CONFIG_VIDEO_BMP_LOGO + free (logo_red); + free (logo_green); + free (logo_blue); +#endif } - /*****************************************************************************/ static void *video_logo (void) { char info[128]; + extern char version_string; logo_plot (video_fb_address, VIDEO_COLS, 0, 0); - sprintf(info, " %s (%s - %s)", U_BOOT_VERSION, __DATE__, __TIME__); + sprintf(info, " %s", &version_string); video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info); #ifdef CONFIG_CONSOLE_EXTRA_INFO diff --git a/drivers/sed13806.c b/drivers/sed13806.c new file mode 100644 index 000000000..55fceef94 --- /dev/null +++ b/drivers/sed13806.c @@ -0,0 +1,306 @@ +/* + * (C) Copyright 2002 + * Stäubli Faverges - <www.staubli.com> + * Pierre AUBERT p.aubert@staubli.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* Video support for Epson SED13806 chipset */ + +#include <common.h> + +#ifdef CONFIG_VIDEO_SED13806 + +#include <video_fb.h> +#include <sed13806.h> + +#define readByte(ptrReg) \ + *(volatile unsigned char *)(sed13806.isaBase + ptrReg) + +#define writeByte(ptrReg,value) \ + *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value + +#define writeWord(ptrReg,value) \ + (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00)) + + +GraphicDevice sed13806; + +/*----------------------------------------------------------------------------- + * EpsonSetRegs -- + *----------------------------------------------------------------------------- + */ +static void EpsonSetRegs (void) +{ + /* the content of the chipset register depends on the board (clocks, ...)*/ + const S1D_REGS *preg = board_get_regs (); + while (preg -> Index) { + writeByte (preg -> Index, preg -> Value); + preg ++; + } +} + +/*----------------------------------------------------------------------------- + * video_hw_init -- + *----------------------------------------------------------------------------- + */ +void *video_hw_init (void) +{ + unsigned int *vm, i; + + memset (&sed13806, 0, sizeof (GraphicDevice)); + + /* Initialization of the access to the graphic chipset + Retreive base address of the chipset + (see board/RPXClassic/eccx.c) */ + if ((sed13806.isaBase = board_video_init ()) == 0) { + return (NULL); + } + + sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET; + sed13806.winSizeX = board_get_width (); + sed13806.winSizeY = board_get_height (); + +#if defined(CONFIG_VIDEO_SED13806_8BPP) + sed13806.gdfIndex = GDF__8BIT_INDEX; + sed13806.gdfBytesPP = 1; + +#elif defined(CONFIG_VIDEO_SED13806_16BPP) + sed13806.gdfIndex = GDF_16BIT_565RGB; + sed13806.gdfBytesPP = 2; + +#else +#error Unsupported SED13806 BPP +#endif + + sed13806.memSize = sed13806.winSizeX * sed13806.winSizeY * sed13806.gdfBytesPP; + + /* Load SED registers */ + EpsonSetRegs (); + + /* (see board/RPXClassic/RPXClassic.c) */ + board_validate_screen (sed13806.isaBase); + + /* Clear video memory */ + i = sed13806.memSize/4; + vm = (unsigned int *)sed13806.frameAdrs; + while(i--) + *vm++ = 0; + + + return (&sed13806); +} +/*----------------------------------------------------------------------------- + * Epson_wait_idle -- Wait for hardware to become idle + *----------------------------------------------------------------------------- + */ +static void Epson_wait_idle (void) +{ + while (readByte (BLT_CTRL0) & 0x80); + + /* Read a word in the BitBLT memory area to shutdown the BitBLT engine */ + *(volatile unsigned short *)(sed13806.isaBase + BLT_REG); +} + +/*----------------------------------------------------------------------------- + * video_hw_bitblt -- + *----------------------------------------------------------------------------- + */ +void video_hw_bitblt ( + unsigned int bpp, /* bytes per pixel */ + unsigned int src_x, /* source pos x */ + unsigned int src_y, /* source pos y */ + unsigned int dst_x, /* dest pos x */ + unsigned int dst_y, /* dest pos y */ + unsigned int dim_x, /* frame width */ + unsigned int dim_y /* frame height */ + ) +{ + register GraphicDevice *pGD = (GraphicDevice *)&sed13806; + unsigned long srcAddr, dstAddr; + unsigned int stride = bpp * pGD -> winSizeX; + + srcAddr = (src_y * stride) + (src_x * bpp); + dstAddr = (dst_y * stride) + (dst_x * bpp); + + Epson_wait_idle (); + + writeByte(BLT_ROP,0x0C); // source + writeByte(BLT_OP,0x02);// move blit in positive direction with ROP + writeWord(BLT_MEM_OFF0, stride / 2); + if (pGD -> gdfIndex == GDF__8BIT_INDEX) { + writeByte(BLT_CTRL1,0x00); + } + else { + writeByte(BLT_CTRL1,0x01); + } + + writeWord(BLT_WIDTH0,(dim_x - 1)); + writeWord(BLT_HEIGHT0,(dim_y - 1)); + + /* set up blit registers */ + writeByte(BLT_SRC_ADDR0,srcAddr); + writeByte(BLT_SRC_ADDR1,srcAddr>>8); + writeByte(BLT_SRC_ADDR2,srcAddr>>16); + + writeByte(BLT_DST_ADDR0,dstAddr); + writeByte(BLT_DST_ADDR1,dstAddr>>8); + writeByte(BLT_DST_ADDR2,dstAddr>>16); + + /* Engage the blt engine */ + /* rectangular region for src and dst */ + writeByte(BLT_CTRL0,0x80); + + /* wait untill current blits finished */ + Epson_wait_idle (); +} +/*----------------------------------------------------------------------------- + * video_hw_rectfill -- + *----------------------------------------------------------------------------- + */ +void video_hw_rectfill ( + unsigned int bpp, /* bytes per pixel */ + unsigned int dst_x, /* dest pos x */ + unsigned int dst_y, /* dest pos y */ + unsigned int dim_x, /* frame width */ + unsigned int dim_y, /* frame height */ + unsigned int color /* fill color */ + ) +{ + register GraphicDevice *pGD = (GraphicDevice *)&sed13806; + unsigned long dstAddr; + unsigned int stride = bpp * pGD -> winSizeX; + + dstAddr = (dst_y * stride) + (dst_x * bpp); + + Epson_wait_idle (); + + /* set up blit registers */ + writeByte(BLT_DST_ADDR0,dstAddr); + writeByte(BLT_DST_ADDR1,dstAddr>>8); + writeByte(BLT_DST_ADDR2,dstAddr>>16); + + writeWord(BLT_WIDTH0,(dim_x - 1)); + writeWord(BLT_HEIGHT0,(dim_y - 1)); + writeWord(BLT_FGCOLOR0,color); + + writeByte(BLT_OP,0x0C); /* solid fill */ + writeWord(BLT_MEM_OFF0,stride / 2); + + if (pGD -> gdfIndex == GDF__8BIT_INDEX) { + writeByte(BLT_CTRL1,0x00); + } + else { + writeByte(BLT_CTRL1,0x01); + } + + /* Engage the blt engine */ + /* rectangular region for src and dst */ + writeByte(BLT_CTRL0,0x80); + + /* wait untill current blits finished */ + Epson_wait_idle (); +} + +/*----------------------------------------------------------------------------- + * video_set_lut -- + *----------------------------------------------------------------------------- + */ +void video_set_lut ( + unsigned int index, /* color number */ + unsigned char r, /* red */ + unsigned char g, /* green */ + unsigned char b /* blue */ + ) +{ + writeByte(REG_LUT_ADDR, index ); + writeByte(REG_LUT_DATA, r); + writeByte(REG_LUT_DATA, g); + writeByte(REG_LUT_DATA, b); +} +#ifdef CONFIG_VIDEO_HW_CURSOR +/*----------------------------------------------------------------------------- + * video_set_hw_cursor -- + *----------------------------------------------------------------------------- + */ +void video_set_hw_cursor (int x, int y) +{ + writeByte (LCD_CURSOR_XL, (x & 0xff)); + writeByte (LCD_CURSOR_XM, (x >> 8)); + writeByte (LCD_CURSOR_YL, (y & 0xff)); + writeByte (LCD_CURSOR_YM, (y >> 8)); +} + +/*----------------------------------------------------------------------------- + * video_init_hw_cursor -- + *----------------------------------------------------------------------------- + */ +void video_init_hw_cursor (int font_width, int font_height) +{ + volatile unsigned char *ptr; + unsigned char pattern; + int i; + + + /* Init cursor content + Cursor size is 64x64 pixels + Start of the cursor memory depends on panel type (dual panel ...) */ + if ((i = readByte (LCD_CURSOR_START)) == 0) { + ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE); + } + else { + ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192)); + } + + /* Fill the first line and the first empty line after cursor */ + for (i = 0, pattern = 0; i < 64; i++) { + if (i < font_width) { + /* Invert background */ + pattern |= 0x3; + + } + else { + /* Background */ + pattern |= 0x2; + } + if ((i & 3) == 3) { + *ptr = pattern; + *(ptr + font_height * 16) = 0xaa; + ptr ++; + pattern = 0; + } + pattern <<= 2; + } + + /* Duplicate this line */ + for (i = 1; i < font_height; i++) { + memcpy ((void *)ptr, (void *)(ptr - 16), 16); + ptr += 16; + } + + for (; i < 64; i++) { + memcpy ((void *)(ptr + 16), (void *)ptr, 16); + ptr += 16; + } + + /* Select cursor mode */ + writeByte (LCD_CURSOR_CNTL, 1); +} +#endif +#endif diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 6de004f79..7dc1b90d1 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -45,7 +45,7 @@ #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 1 second */ #endif #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ @@ -429,10 +429,12 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#if NOT_USED_FOR_NOW #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 #define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" #endif #define CONFIG_AUTOBOOT_STOP_STR "2" /* easy to stop for now */ +#endif /* NOT_USED_FOR_NOW */ #endif /* __CONFIG_H */ diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index d742a25dc..f20b8f99a 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -47,13 +47,27 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ - /* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1 */ -#undef CONFIG_FEC_ENET +#define CONFIG_FEC_ENET #ifdef CONFIG_FEC_ENET #define CFG_DISCOVER_PHY 1 +#define CONFIG_MII 1 #endif /* CONFIG_FEC_ENET */ +/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard */ +#if 1 +#define CONFIG_VIDEO_SED13806 +#define CONFIG_NEC_NL6448BC20 +#define CONFIG_VIDEO_SED13806_16BPP + +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +#endif + #if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else @@ -168,7 +182,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFF000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -196,7 +210,8 @@ #if 0 #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x8000 +#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ #else #define CFG_ENV_IS_IN_NVRAM 1 #define CFG_ENV_ADDR 0xfa000100 @@ -353,6 +368,48 @@ #define CFG_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ #define CFG_OR4_PRELIM 0xFFF80970 +/* ECCX CS settings */ +#define SED13806_OR 0xFFC00108 /* - 4 Mo + - Burst inhibit + - external TA */ +#define SED13806_REG_ADDR 0xa0000000 +#define SED13806_ACCES 0x801 /* 16 bit access */ + + +/* Global definitions for the ECCX board */ +#define ECCX_CSR_ADDR (0xfac00000) +#define ECCX_CSR8_OFFSET (0x8) +#define ECCX_CSR11_OFFSET (0xB) +#define ECCX_CSR12_OFFSET (0xC) + +#define ECCX_CSR8 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET) +#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET) +#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET) + + +#define REG_GPIO_CTRL 0x008 + +/* Definitions for CSR8 */ +#define ECCX_ENEPSON 0x80 /* Bit 0: + 0= disable and reset SED1386 + 1= enable SED1386 */ +/* Bit 1: 0= SED1386 in Big Endian mode */ +/* 1= SED1386 in little endian mode */ +#define ECCX_LE 0x40 +#define ECCX_BE 0x00 + +/* Bit 2,3: Selection */ +/* 00 = Disabled */ +/* 01 = CS2 is used for the SED1386 */ +/* 10 = CS5 is used for the SED1386 */ +/* 11 = reserved */ +#define ECCX_CS2 0x10 +#define ECCX_CS5 0x20 + +/* Definitions for CSR12 */ +#define ECCX_ID 0x02 +#define ECCX_860 0x01 + /* * Memory Periodic Timer Prescaler */ diff --git a/include/devices.h b/include/devices.h index b1e1ebdfd..875710d35 100644 --- a/include/devices.h +++ b/include/devices.h @@ -99,7 +99,7 @@ int drv_lcd_init (void); #ifdef CONFIG_VFD int drv_vfd_init (void); #endif -#ifdef CONFIG_VIDEO +#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) int drv_video_init (void); #endif #ifdef CONFIG_WL_4PPM_KEYBOARD diff --git a/include/sed13806.h b/include/sed13806.h new file mode 100644 index 000000000..70e8e8744 --- /dev/null +++ b/include/sed13806.h @@ -0,0 +1,98 @@ +/* + * (C) Copyright 2002 + * Stäubli Faverges - <www.staubli.com> + * Pierre AUBERT p.aubert@staubli.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* Video support for Epson SED13806 chipset */ + + +#ifndef _SED13806_H_ +#define _SED13806_H_ + + +/* General definitions */ +#define FRAME_BUFFER_OFFSET 0x200000 /* Frame buffer offset */ +#define TOTAL_SPACE_SIZE 0x400000 + +#define DEFAULT_VIDEO_MEMORY_SIZE 0x140000 /* Video Memory Size */ + +#define HWCURSORSIZE 1024 /* Size of memory reserved + for HW cursor*/ + +/* Offset of chipset registers */ +#define BLT_CTRL0 (0x0100) +#define BLT_CTRL1 (0x0101) +#define BLT_ROP (0x0102) +#define BLT_OP (0x0103) +#define BLT_SRC_ADDR0 (0x0104) +#define BLT_SRC_ADDR1 (0x0105) +#define BLT_SRC_ADDR2 (0x0106) +#define BLT_DST_ADDR0 (0x0108) +#define BLT_DST_ADDR1 (0x0109) +#define BLT_DST_ADDR2 (0x010A) +#define BLT_MEM_OFF0 (0x010C) +#define BLT_MEM_OFF1 (0x010D) +#define BLT_WIDTH0 (0x0110) +#define BLT_WIDTH1 (0x0111) +#define BLT_HEIGHT0 (0x0112) +#define BLT_HEIGHT1 (0x0113) +#define BLT_BGCOLOR0 (0x0114) +#define BLT_BGCOLOR1 (0x0115) +#define BLT_FGCOLOR0 (0x0118) +#define BLT_FGCOLOR1 (0x0119) + +#define BLT_REG (0x100000) + +/* Lookup table registers */ +#define REG_LUT_ADDR 0x1e2 +#define REG_LUT_DATA 0x1e4 + +/* Cursor/Ink registers */ +#define LCD_CURSOR_CNTL (0x0070) +#define LCD_CURSOR_START (0x0071) +#define LCD_CURSOR_XL (0x0072) +#define LCD_CURSOR_XM (0x0073) +#define LCD_CURSOR_YL (0x0074) +#define LCD_CURSOR_YM (0x0075) +#define LCD_CURSOR_COL0_B (0x0076) +#define LCD_CURSOR_COL0_G (0x0077) +#define LCD_CURSOR_COL0_R (0x0078) +#define LCD_CURSOR_COL1_B (0x007A) +#define LCD_CURSOR_COL1_G (0x007B) +#define LCD_CURSOR_COL1_R (0x007C) +#define LCD_CURSOR_FIFO (0x007E) + +typedef struct +{ + unsigned short Index; + unsigned char Value; +} S1D_REGS; + + + +/* Board specific functions */ +unsigned int board_video_init (void); +void board_validate_screen (unsigned int base); +const S1D_REGS *board_get_regs (void); +int board_get_width (void); +int board_get_height (void); + +#endif /* _SED13806_H_ */ diff --git a/lib_arm/board.c b/lib_arm/board.c index 47dc53ce1..b6b5cdb76 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -46,7 +46,10 @@ static ulong mem_malloc_start = 0; static ulong mem_malloc_end = 0; static ulong mem_malloc_brk = 0; -static void mem_malloc_init (ulong dest_addr) +#if !defined(CONFIG_MODEM_SUPPORT) +static +#endif +void mem_malloc_init (ulong dest_addr) { mem_malloc_start = dest_addr; mem_malloc_end = dest_addr + CFG_MALLOC_LEN; @@ -184,7 +187,7 @@ void start_armboot (void) gd_t gd_data; bd_t bd_data; init_fnc_t **init_fnc_ptr; -#ifdef CONFIG_VFD +#if defined(CONFIG_VFD) && !defined(CONFIG_MODEM_SUPPORT) unsigned long addr; #endif @@ -205,6 +208,7 @@ void start_armboot (void) display_flash_config (size); #ifdef CONFIG_VFD +#ifndef CONFIG_MODEM_SUPPORT #ifndef PAGE_SIZE #define PAGE_SIZE 4096 #endif @@ -219,14 +223,17 @@ void start_armboot (void) addr += size; addr = (addr + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); mem_malloc_init (addr); +#endif /* CONFIG_MODEM_SUPPORT */ #else /* armboot_real_end is defined in the board-specific linker script */ mem_malloc_init (_armboot_real_end); #endif /* CONFIG_VFD */ #ifdef CONFIG_VFD +#ifndef CONFIG_MODEM_SUPPORT /* must do this after the framebuffer is allocated */ drv_vfd_init(); +#endif /* CONFIG_MODEM_SUPPORT */ #endif /* initialize environment */ env_relocate (); diff --git a/post/memory.c b/post/memory.c index 7d55a6d5c..6884abdb1 100644 --- a/post/memory.c +++ b/post/memory.c @@ -266,7 +266,7 @@ static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size) ulong xor; int ret = 0; - end = base + size; + end = (ulong *)((ulong)base + size); /* pointer arith! */ xor = 0; for(xor = sizeof(ulong); xor > 0; xor <<= 1) { target = (ulong *)((ulong)testaddr ^ xor); diff --git a/tools/mkimage.c b/tools/mkimage.c index 0f99f3b4a..095880e6a 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -250,8 +250,9 @@ NXTARG: ; */ if (xflag) { if (ep != addr + sizeof(image_header_t)) { - fprintf (stderr, "%s: For XIP, the entry point must be the load addr + %d\n", - cmdname, sizeof(image_header_t)); + fprintf (stderr, "%s: For XIP, the entry point must be the load addr + %lu\n", + cmdname, + (unsigned long)sizeof(image_header_t)); exit (EXIT_FAILURE); } } |