diff options
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock.c | 111 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 218 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/emif4.c | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/clock.h | 70 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/ddr_defs.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 | ||||
| -rw-r--r-- | board/isee/igep0033/board.c | 10 | ||||
| -rw-r--r-- | board/phytec/pcm051/board.c | 9 | ||||
| -rw-r--r-- | board/ti/am335x/board.c | 27 |
10 files changed, 272 insertions, 181 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index dbd1ec3c0..7fd21af1f 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -10,6 +10,7 @@ LIB = $(obj)lib$(SOC).o COBJS-$(CONFIG_AM33XX) += clock_am33xx.o COBJS-$(CONFIG_TI814X) += clock_ti814x.o +COBJS-$(CONFIG_AM33XX) += clock.o COBJS += sys_info.o COBJS += mem.o COBJS += ddr.o diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c new file mode 100644 index 000000000..15f4a2c32 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -0,0 +1,111 @@ +/* + * clock.c + * + * Clock initialization for AM33XX boards. + * Derived from OMAP4 boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> + +static void setup_post_dividers(const struct dpll_regs *dpll_regs, + const struct dpll_params *params) +{ + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, dpll_regs->cm_div_m3_dpll); + if (params->m4 >= 0) + writel(params->m4, dpll_regs->cm_div_m4_dpll); + if (params->m5 >= 0) + writel(params->m5, dpll_regs->cm_div_m5_dpll); + if (params->m6 >= 0) + writel(params->m6, dpll_regs->cm_div_m6_dpll); +} + +static inline void do_lock_dpll(const struct dpll_regs *dpll_regs) +{ + clrsetbits_le32(dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_lock(const struct dpll_regs *dpll_regs) +{ + if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, + (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("DPLL locking failed for 0x%x\n", + dpll_regs->cm_clkmode_dpll); + hang(); + } +} + +static inline void do_bypass_dpll(const struct dpll_regs *dpll_regs) +{ + clrsetbits_le32(dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_bypass(const struct dpll_regs *dpll_regs) +{ + if (!wait_on_value(ST_DPLL_CLK_MASK, 0, + (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("Bypassing DPLL failed 0x%x\n", + dpll_regs->cm_clkmode_dpll); + } +} + +static void bypass_dpll(const struct dpll_regs *dpll_regs) +{ + do_bypass_dpll(dpll_regs); + wait_for_bypass(dpll_regs); +} + +void do_setup_dpll(const struct dpll_regs *dpll_regs, + const struct dpll_params *params) +{ + u32 temp; + + if (!params) + return; + + temp = readl(dpll_regs->cm_clksel_dpll); + + bypass_dpll(dpll_regs); + + /* Set M & N */ + temp &= ~CM_CLKSEL_DPLL_M_MASK; + temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; + + temp &= ~CM_CLKSEL_DPLL_N_MASK; + temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; + + writel(temp, dpll_regs->cm_clksel_dpll); + + setup_post_dividers(dpll_regs, params); + + /* Wait till the DPLL locks */ + do_lock_dpll(dpll_regs); + wait_for_lock(dpll_regs); +} + +void setup_dplls(void) +{ + const struct dpll_params *params; + do_setup_dpll(&dpll_core_regs, &dpll_core); + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu); + do_setup_dpll(&dpll_per_regs, &dpll_per); + writel(0x300, &cmwkup->clkdcoldodpllper); + + params = get_dpll_ddr_params(); + do_setup_dpll(&dpll_ddr_regs, params); +} diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index fb3fb43dc..d5d47ad74 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -18,55 +18,50 @@ #define PRCM_FORCE_WAKEUP 0x2 #define PRCM_FUNCTL 0x0 -#define PRCM_EMIF_CLK_ACTIVITY BIT(2) -#define PRCM_L3_GCLK_ACTIVITY BIT(4) - -#define PLL_BYPASS_MODE 0x4 -#define ST_MN_BYPASS 0x00000100 -#define ST_DPLL_CLK 0x00000001 -#define CLK_SEL_MASK 0x7ffff -#define CLK_DIV_MASK 0x1f -#define CLK_DIV2_MASK 0x7f -#define CLK_SEL_SHIFT 0x8 -#define CLK_MODE_SEL 0x7 -#define CLK_MODE_MASK 0xfffffff8 -#define CLK_DIV_SEL 0xFFFFFFE0 #define CPGMAC0_IDLE 0x30000 -#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 - #define OSC (V_OSCK/1000000) -#define MPUPLL_M CONFIG_SYS_MPUCLK -#define MPUPLL_N (OSC-1) -#define MPUPLL_M2 1 +const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; +const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; +const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; +const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; -/* Core PLL Fdll = 1 GHZ, */ -#define COREPLL_M 1000 -#define COREPLL_N (OSC-1) +const struct dpll_regs dpll_mpu_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x88, + .cm_idlest_dpll = CM_WKUP + 0x20, + .cm_clksel_dpll = CM_WKUP + 0x2C, + .cm_div_m2_dpll = CM_WKUP + 0xA8, +}; -#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ -#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ -#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ +const struct dpll_regs dpll_core_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x90, + .cm_idlest_dpll = CM_WKUP + 0x5C, + .cm_clksel_dpll = CM_WKUP + 0x68, + .cm_div_m4_dpll = CM_WKUP + 0x80, + .cm_div_m5_dpll = CM_WKUP + 0x84, + .cm_div_m6_dpll = CM_WKUP + 0xD8, +}; -/* - * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll - * frequency needs to be set to 960 MHZ. Hence, - * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below - */ -#define PERPLL_M 960 -#define PERPLL_N (OSC-1) -#define PERPLL_M2 5 +const struct dpll_regs dpll_per_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x8C, + .cm_idlest_dpll = CM_WKUP + 0x70, + .cm_clksel_dpll = CM_WKUP + 0x9C, + .cm_div_m2_dpll = CM_WKUP + 0xAC, +}; -/* DDR Freq is 266 MHZ for now */ -/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ -#define DDRPLL_M 266 -#define DDRPLL_N (OSC-1) -#define DDRPLL_M2 1 +const struct dpll_regs dpll_ddr_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x94, + .cm_idlest_dpll = CM_WKUP + 0x34, + .cm_clksel_dpll = CM_WKUP + 0x40, + .cm_div_m2_dpll = CM_WKUP + 0xA0, +}; -const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; -const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; -const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; -const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; +const struct dpll_params dpll_mpu = { + CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_core = { + 1000, OSC-1, -1, -1, 10, 8, 4}; +const struct dpll_params dpll_per = { + 960, OSC-1, 5, -1, -1, -1, -1}; static void enable_interface_clocks(void) { @@ -238,142 +233,6 @@ static void enable_per_clocks(void) ; } -void mpu_pll_config_val(int mpull_m) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllmpu); - clksel = readl(&cmwkup->clkseldpllmpu); - div_m2 = readl(&cmwkup->divm2dpllmpu); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllmpu); - while (readl(&cmwkup->idlestdpllmpu) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N); - writel(clksel, &cmwkup->clkseldpllmpu); - - div_m2 = div_m2 & ~CLK_DIV_MASK; - div_m2 = div_m2 | MPUPLL_M2; - writel(div_m2, &cmwkup->divm2dpllmpu); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllmpu); - - while (readl(&cmwkup->idlestdpllmpu) != ST_DPLL_CLK) - ; -} - -static void mpu_pll_config(void) -{ - mpu_pll_config_val(CONFIG_SYS_MPUCLK); -} - -static void core_pll_config(void) -{ - u32 clkmode, clksel, div_m4, div_m5, div_m6; - - clkmode = readl(&cmwkup->clkmoddpllcore); - clksel = readl(&cmwkup->clkseldpllcore); - div_m4 = readl(&cmwkup->divm4dpllcore); - div_m5 = readl(&cmwkup->divm5dpllcore); - div_m6 = readl(&cmwkup->divm6dpllcore); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllcore); - - while (readl(&cmwkup->idlestdpllcore) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((COREPLL_M << CLK_SEL_SHIFT) | COREPLL_N); - writel(clksel, &cmwkup->clkseldpllcore); - - div_m4 = div_m4 & ~CLK_DIV_MASK; - div_m4 = div_m4 | COREPLL_M4; - writel(div_m4, &cmwkup->divm4dpllcore); - - div_m5 = div_m5 & ~CLK_DIV_MASK; - div_m5 = div_m5 | COREPLL_M5; - writel(div_m5, &cmwkup->divm5dpllcore); - - div_m6 = div_m6 & ~CLK_DIV_MASK; - div_m6 = div_m6 | COREPLL_M6; - writel(div_m6, &cmwkup->divm6dpllcore); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllcore); - - while (readl(&cmwkup->idlestdpllcore) != ST_DPLL_CLK) - ; -} - -static void per_pll_config(void) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllper); - clksel = readl(&cmwkup->clkseldpllper); - div_m2 = readl(&cmwkup->divm2dpllper); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllper); - - while (readl(&cmwkup->idlestdpllper) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((PERPLL_M << CLK_SEL_SHIFT) | PERPLL_N); - writel(clksel, &cmwkup->clkseldpllper); - - div_m2 = div_m2 & ~CLK_DIV2_MASK; - div_m2 = div_m2 | PERPLL_M2; - writel(div_m2, &cmwkup->divm2dpllper); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllper); - - while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK) - ; - - writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper); -} - -void ddr_pll_config(unsigned int ddrpll_m) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllddr); - clksel = readl(&cmwkup->clkseldpllddr); - div_m2 = readl(&cmwkup->divm2dpllddr); - - /* Set the PLL to bypass Mode */ - clkmode = (clkmode & CLK_MODE_MASK) | PLL_BYPASS_MODE; - writel(clkmode, &cmwkup->clkmoddpllddr); - - /* Wait till bypass mode is enabled */ - while ((readl(&cmwkup->idlestdpllddr) & ST_MN_BYPASS) - != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N); - writel(clksel, &cmwkup->clkseldpllddr); - - div_m2 = div_m2 & CLK_DIV_SEL; - div_m2 = div_m2 | DDRPLL_M2; - writel(div_m2, &cmwkup->divm2dpllddr); - - clkmode = (clkmode & CLK_MODE_MASK) | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllddr); - - /* Wait till dpll is locked */ - while ((readl(&cmwkup->idlestdpllddr) & ST_DPLL_CLK) != ST_DPLL_CLK) - ; -} - void enable_emif_clocks(void) { /* Enable the EMIF_FW Functional clock */ @@ -390,10 +249,7 @@ void enable_emif_clocks(void) */ void pll_init() { - mpu_pll_config(); - core_pll_config(); - per_pll_config(); - + setup_dplls(); /* Enable the required interconnect clocks */ enable_interface_clocks(); diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 55dc3212a..15c4734b2 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -79,6 +79,10 @@ static void config_vtp(int nr) ; } +void __weak ddr_pll_config(unsigned int ddrpll_m) +{ +} + void config_ddr(unsigned int pll, unsigned int ioctrl, const struct ddr_data *data, const struct cmd_control *ctrl, const struct emif_regs *regs, int nr) diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 44c1e5dab..703b80e51 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -13,4 +13,74 @@ #include <asm/arch/clocks_am33xx.h> +#define LDELAY 1000000 + +/* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 +#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) +#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 +#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10) +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9 +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9) +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) +#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 +#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) +#define CM_CLKMODE_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) + +#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 + +#define DPLL_EN_STOP 1 +#define DPLL_EN_MN_BYPASS 4 +#define DPLL_EN_LOW_POWER_BYPASS 5 +#define DPLL_EN_LOCK 7 + +/* CM_IDLEST_DPLL fields */ +#define ST_DPLL_CLK_MASK 1 + +/* CM_CLKSEL_DPLL */ +#define CM_CLKSEL_DPLL_M_SHIFT 8 +#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) +#define CM_CLKSEL_DPLL_N_SHIFT 0 +#define CM_CLKSEL_DPLL_N_MASK 0x7F + +struct dpll_params { + u32 m; + u32 n; + s8 m2; + s8 m3; + s8 m4; + s8 m5; + s8 m6; +}; + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_m4_dpll; + u32 cm_div_m5_dpll; + u32 cm_div_m6_dpll; +}; + +extern const struct dpll_regs dpll_mpu_regs; +extern const struct dpll_regs dpll_core_regs; +extern const struct dpll_regs dpll_per_regs; +extern const struct dpll_regs dpll_ddr_regs; +extern const struct dpll_params dpll_mpu; +extern const struct dpll_params dpll_core; +extern const struct dpll_params dpll_per; +extern const struct dpll_params dpll_ddr; + +extern const struct cm_wkuppll *cmwkup; + +void setup_dplls(void); +const struct dpll_params *get_dpll_ddr_params(void); +void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *); + #endif diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 18d7d99a4..683ba8ea9 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -146,6 +146,8 @@ void set_sdram_timings(const struct emif_regs *regs, int nr); */ void config_ddr_phy(const struct emif_regs *regs, int nr); +void ddr_pll_config(unsigned int ddrpll_m); + struct ddr_cmd_regs { unsigned int resv0[7]; unsigned int cm0csratio; /* offset 0x01C */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 1424f90bf..dbcede016 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -37,4 +37,5 @@ void omap_nand_switch_ecc(uint32_t, uint32_t); void rtc32k_enable(void); void uart_soft_reset(void); +u32 wait_on_value(u32, u32, void *, u32); #endif diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c index c0f0c0db4..034a8aa7c 100644 --- a/board/isee/igep0033/board.c +++ b/board/isee/igep0033/board.c @@ -66,6 +66,16 @@ static struct emif_regs ddr3_emif_reg_data = { .zq_config = K4B2G1646EBIH9_ZQ_CFG, .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY, }; + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + 303, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + #endif /* diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 6291d03ba..17a98ff86 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -44,6 +44,15 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; /* DDR RAM defines */ #define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */ +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + DDR_CLK_MHZ, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + static const struct ddr_data ddr3_data = { .datardsratio0 = MT41J256M8HX15E_RD_DQS, .datawdsratio0 = MT41J256M8HX15E_WR_DQS, diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 728afc2ba..2be229746 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -242,6 +242,33 @@ int spl_start_uboot(void) } #endif +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + 266, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_evm_sk = { + 303, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_bone_black = { + 400, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + struct am335x_baseboard_id header; + + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom(&header) < 0) + puts("Could not get board ID.\n"); + + if (board_is_evm_sk(&header)) + return &dpll_ddr_evm_sk; + else if (board_is_bone_lt(&header)) + return &dpll_ddr_bone_black; + else if (board_is_evm_15_or_later(&header)) + return &dpll_ddr_evm_sk; + else + return &dpll_ddr; +} + #endif /* |