diff options
59 files changed, 737 insertions, 386 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index d5249e515..66f00403c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -42,6 +42,10 @@ Yuli Barcohen <yuli@arabellasw.com> Rattler MPC8248 ZPC1900 MPC8265 +Michael Barkowski <michael.barkowski@freescale.com> + + MPC8323ERDB MPC8323 + Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> sacsng MPC8260 @@ -217,6 +221,10 @@ The LEOX team <team@leox.org> ELPT860 MPC860T +Dave Liu <daveliu@freescale.com> + + MPC8360EMDS MPC8360 + Nye Liu <nyet@zumanetworks.com> ZUMA MPC7xx_74xx @@ -273,6 +281,10 @@ Denis Peter <d.peter@mpl.ch> MIP405 PPC4xx PIP405 PPC4xx +Kim Phillips <kim.phillips@freescale.com> + + MPC8349EMDS MPC8349 + Daniel Poirot <dan.poirot@windriver.com> sbc8240 MPC8240 @@ -296,6 +308,7 @@ Stefan Roese <sr@denx.de> ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP + rainier PPC440GRx sequoia PPC440EPx sycamore PPC405GPr taishan PPC440GX @@ -320,6 +333,11 @@ Peter De Schrijver <p2@mind.be> ML2 PPC4xx +Timur Tabi <timur@freescale.com> + + MPC8349E-mITX MPC8349 + MPC8349E-mITX-GP MPC8349 + Erik Theisen <etheisen@mindspring.com> W7OLMC PPC4xx @@ -352,19 +370,6 @@ John Zhan <zhanz@sinovee.com> svm_sc8xx MPC8xx -Timur Tabi <timur@freescale.com> - - MPC8349E-mITX MPC8349 - MPC8349E-mITX-GP MPC8349 - -Kim Phillips <kim.phillips@freescale.com> - - MPC8349EMDS MPC8349 - -Dave Liu <daveliu@freescale.com> - - MPC8360EMDS MPC8360 - ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -204,6 +204,7 @@ LIST_4xx=" \ PLU405 \ PMC405 \ PPChameleonEVB \ + rainier \ sbc405 \ sc3 \ sequoia \ @@ -298,6 +299,7 @@ LIST_8260=" \ LIST_83xx=" \ MPC8313ERDB_33 \ MPC8313ERDB_66 \ + MPC8323ERDB \ MPC832XEMDS \ MPC8349EMDS \ MPC8349ITX \ @@ -1688,7 +1688,7 @@ MPC8313ERDB_66_config: unconfig echo -n "...66M..." ; \ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale MPC8323ERDB_config: unconfig @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale @@ -1716,10 +1716,10 @@ MPC832XEMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds + @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale MPC8349EMDS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale MPC8349ITX_config \ MPC8349ITX_LOWBOOT_config \ @@ -1733,7 +1733,7 @@ MPC8349ITXGP_config: unconfig @if [ "$(findstring LOWBOOT,$@)" ] ; then \ echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \ fi - @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx + @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale MPC8360EMDS_config \ MPC8360EMDS_HOST_33_config \ @@ -1758,7 +1758,7 @@ MPC8360EMDS_SLAVE_config: unconfig echo -n "...66M..." ; \ echo "#define PCI_66M" >>$(obj)include/config.h ; \ fi ; - @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds + @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index 6fc60eaaa..f3803c09f 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -26,76 +26,185 @@ #include <command.h> #include <i2c.h> -static u8 boot_533_nor[] = { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 -}; +/* + * There are 2 versions of production Sequoia & Rainier platforms. + * The primary difference is the reference clock. Those with + * 33333333 reference clocks will also have 667MHz rated + * processors. Not enough differences to have unique clock + * settings. + * + * NOR and NAND boot options change bytes 6, 7, 8, 9, 11. The + * values are independent of the rest of the clock settings. + * + * All Sequoias & Rainiers select from two possible EEPROMs in Boot + * Config F. One for 33MHz PCI, one for 66MHz PCI. The following + * values are for the 33MHz PCI configuration. Byte 5 (0 base) is + * the only value affected for a 66MHz PCI and simply needs a +0x10. + */ + +#define NAND_COMPATIBLE 0x01 +#define NOR_COMPATIBLE 0x02 + +/* check with Stefan on CFG_I2C_EEPROM_ADDR */ +#define I2C_EEPROM_ADDR 0x52 -static u8 boot_533_nand[] = { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +static char *config_labels[] = { + "CPU: 333 PLB: 133 OPB: 66 EBC: 66", + "CPU: 333 PLB: 166 OPB: 83 EBC: 55", + "CPU: 400 PLB: 133 OPB: 66 EBC: 66", + "CPU: 400 PLB: 160 OPB: 80 EBC: 53", + "CPU: 416 PLB: 166 OPB: 83 EBC: 55", + "CPU: 500 PLB: 166 OPB: 83 EBC: 55", + "CPU: 533 PLB: 133 OPB: 66 EBC: 66", + "CPU: 667 PLB: 166 OPB: 83 EBC: 55", + NULL }; -static u8 boot_667_nor[] = { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 +static u8 boot_configs[][17] = { + { + (NOR_COMPATIBLE), + 0x84, 0x70, 0xa2, 0xa6, 0x05, 0x57, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x86, 0x78, 0xc2, 0xc6, 0x05, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x86, 0x78, 0xc2, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + } }; -static u8 boot_667_nand[] = { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +/* + * Bytes 6,8,9,11 change for NAND boot + */ +static u8 nand_boot[] = { + 0xd0, 0xa0, 0x68, 0x58 }; static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - u8 chip; - u8 *buf; - int cpu_freq; + u8 *buf, bNAND; + int x, y, nbytes, selcfg; + extern char console_buffer[]; - if (argc < 3) { + if (argc < 2) { printf("Usage:\n%s\n", cmdtp->usage); return 1; } - cpu_freq = simple_strtol(argv[1], NULL, 10); - if (!((cpu_freq == 533) || (cpu_freq == 667))) { - printf("Unsupported cpu-frequency - only 533 and 667 supported\n"); + if ((strcmp(argv[1], "nor") != 0) && + (strcmp(argv[1], "nand") != 0)) { + printf("Unsupported boot-device - only nor|nand support\n"); return 1; } - /* use 0x52 as I2C EEPROM address for now */ - chip = 0x52; + /* set the nand flag based on provided input */ + if ((strcmp(argv[1], "nand") == 0)) + bNAND = 1; + else + bNAND = 0; - if ((strcmp(argv[2], "nor") != 0) && - (strcmp(argv[2], "nand") != 0)) { - printf("Unsupported boot-device - only nor|nand support\n"); - return 1; - } + printf("Available configurations: \n\n"); - if (strcmp(argv[2], "nand") == 0) { - switch (cpu_freq) { - default: - case 533: - buf = boot_533_nand; - break; - case 667: - buf = boot_667_nand; - break; + if (bNAND) { + for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { + /* filter on nand compatible */ + if (boot_configs[x][0] & NAND_COMPATIBLE) { + printf(" %d - %s\n", (y+1), config_labels[x]); + y++; + } } } else { - switch (cpu_freq) { - default: - case 533: - buf = boot_533_nor; - break; - case 667: - buf = boot_667_nor; - break; + for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { + /* filter on nor compatible */ + if (boot_configs[x][0] & NOR_COMPATIBLE) { + printf(" %d - %s\n", (y+1), config_labels[x]); + y++; + } } } - if (i2c_write(chip, 0, 1, buf, 16) != 0) - printf("Error writing to EEPROM at address 0x%x\n", chip); + do { + nbytes = readline(" Selection [1-x / quit]: "); + + if (nbytes) { + if (strcmp(console_buffer, "quit") == 0) + return 0; + selcfg = simple_strtol(console_buffer, NULL, 10); + if ((selcfg < 1) || (selcfg > y)) + nbytes = 0; + } + } while (nbytes == 0); + + + y = (selcfg - 1); + + for (x = 0; boot_configs[x][0] != 0; x++) { + if (bNAND) { + if (boot_configs[x][0] & NAND_COMPATIBLE) { + if (y > 0) + y--; + else if (y < 1) + break; + } + } else { + if (boot_configs[x][0] & NOR_COMPATIBLE) { + if (y > 0) + y--; + else if (y < 1) + break; + } + } + } + + buf = &boot_configs[x][1]; + + if (bNAND) { + buf[6] = nand_boot[0]; + buf[8] = nand_boot[1]; + buf[9] = nand_boot[2]; + buf[11] = nand_boot[3]; + } + + /* check CPLD register +5 for PCI 66MHz flag */ + if (in8(CFG_BCSR_BASE + 5) & 0x01) + buf[5] += 0x10; + + if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0) + printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR); udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); printf("Done\n"); @@ -105,7 +214,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - bootstrap, 3, 0, do_bootstrap, + bootstrap, 2, 0, do_bootstrap, "bootstrap - program the I2C bootstrap EEPROM\n", - "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" + "<nand|nor> - strap to boot from NAND or NOR flash\n" ); diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index da147ee55..a76b00fe4 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -24,10 +24,6 @@ #include <common.h> -#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) -#warning CFG_NAND_LEGACY not defined in a file using the legacy NAND support! -#endif - #include <command.h> #include <image.h> #include <asm/byteorder.h> diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c new file mode 100644 index 000000000..8c013c72f --- /dev/null +++ b/board/freescale/common/pq-mds-pib.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * Tony Li <tony.li@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> + +#include "pq-mds-pib.h" + +int pib_init(void) +{ + u8 val8; + u8 orig_i2c_bus; + + /* Switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0; +#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE) + /* Assign PIB PMC slot to desired PCI bus */ + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(CONFIG_MPC832XEMDS) + val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ +#else + val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + eieio(); + +#if defined(CONFIG_MPC832XEMDS) + printf("PCI 32bit bus on PMC2 &PMC3\n"); +#else + printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); +#endif +#endif + +#if defined(CONFIG_PQ_MDS_PIB_ATM) +#if defined(CONFIG_MPC8360EMDS) + val8 = 0; + i2c_write(0x20, 0x6, 1, &val8, 1); + i2c_write(0x20, 0x7, 1, &val8, 1); + + val8 = 0xdf; + i2c_write(0x20, 0x2, 1, &val8, 1); + val8 = 0xf7; + i2c_write(0x20, 0x3, 1, &val8, 1); + + eieio(); + + printf("QOC3 ATM card on PMC0\n"); +#elif defined(CONFIG_MPC832XEMDS) + val = 0; + i2c_write(0x26, 0x7, 1, &val, 1); + val = 0xf7; + i2c_write(0x26, 0x3, 1, &val, 1); + + val = 0; + i2c_write(0x21, 0x6, 1, &val, 1); + i2c_write(0x21, 0x7, 1, &val, 1); + + val = 0xdf; + i2c_write(0x21, 0x2, 1, &val, 1); + val = 0xef; + i2c_write(0x21, 0x3, 1, &val, 1); + + eieio(); + + printf("QOC3 ATM card on PMC1\n"); +#endif +#endif + /* Reset to original I2C bus */ + i2c_set_bus_num(orig_i2c_bus); + return 0; +} diff --git a/board/freescale/common/pq-mds-pib.h b/board/freescale/common/pq-mds-pib.h new file mode 100644 index 000000000..67066fd11 --- /dev/null +++ b/board/freescale/common/pq-mds-pib.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + */ + +extern int pib_init(void); diff --git a/board/mpc8313erdb/Makefile b/board/freescale/mpc8313erdb/Makefile index a987e510d..a987e510d 100644 --- a/board/mpc8313erdb/Makefile +++ b/board/freescale/mpc8313erdb/Makefile diff --git a/board/mpc8313erdb/config.mk b/board/freescale/mpc8313erdb/config.mk index f76826495..f76826495 100644 --- a/board/mpc8313erdb/config.mk +++ b/board/freescale/mpc8313erdb/config.mk diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 999fe9e39..861c143df 100644 --- a/board/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -23,7 +23,11 @@ */ #include <common.h> +#if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif #include <pci.h> #include <mpc83xx.h> @@ -96,21 +100,22 @@ void pci_init_board(void) mpc83xx_pci_init(1, reg, warmboot); } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +#if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); - if (p) { + if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 4b6778837..e6e84107e 100644 --- a/board/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -112,8 +112,6 @@ long int initdram(int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ msize = fixed_sdram(); @@ -127,7 +125,6 @@ long int initdram(int board_type) resume_from_sleep(); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return msize; } diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 1886f196b..e73861300 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -17,7 +17,6 @@ #include <miiphy.h> #include <command.h> #include <libfdt.h> -#include <libfdt_env.h> #if defined(CONFIG_PCI) #include <pci.h> #endif @@ -92,8 +91,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -185,33 +182,21 @@ void pci_init_board(void) } #if defined(CONFIG_OF_BOARD_SETUP) - -/* - * Prototypes of functions that we use. - */ -void ft_cpu_setup(void *blob, bd_t *bd); - -#ifdef CONFIG_PCI -void ft_pci_setup(void *blob, bd_t *bd); -#endif - -void -ft_board_setup(void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - int nodeoffset; - int tmp[2]; +#if defined(CONFIG_OF_FLAT_TREE) + u32 *p; + int len; - nodeoffset = fdt_find_node_by_path(blob, "/memory"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(bd->bi_memstart); - tmp[1] = cpu_to_be32(bd->bi_memsize); - fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); } - +#endif ft_cpu_setup(blob, bd); - #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif } -#endif /* CONFIG_OF_BOARD_SETUP */ +#endif diff --git a/board/mpc8360emds/Makefile b/board/freescale/mpc832xemds/Makefile index 5ec7a871d..ea52484c0 100644 --- a/board/mpc8360emds/Makefile +++ b/board/freescale/mpc832xemds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc832xemds/config.mk b/board/freescale/mpc832xemds/config.mk index 6c3eca753..6c3eca753 100644 --- a/board/mpc832xemds/config.mk +++ b/board/freescale/mpc832xemds/config.mk diff --git a/board/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c index 772da678f..6ba25d464 100644 --- a/board/mpc832xemds/mpc832xemds.c +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -29,6 +29,11 @@ #endif #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" #endif const qe_iop_conf_t qe_iop_conf_tab[] = { @@ -86,6 +91,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + int fixed_sdram(void); long int initdram(int board_type) @@ -101,8 +114,6 @@ long int initdram(int board_type) msize = fixed_sdram(); - puts("\n DDR RAM: "); - /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -155,22 +166,22 @@ int checkboard(void) return 0; } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc832xemds/pci.c b/board/freescale/mpc832xemds/pci.c index d0a407ae8..6bc35c70f 100644 --- a/board/mpc832xemds/pci.c +++ b/board/freescale/mpc832xemds/pci.c @@ -20,6 +20,8 @@ #include <i2c.h> #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> #endif #include <asm/fsl_i2c.h> @@ -129,7 +131,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -198,43 +199,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -290,8 +254,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC2 & PMC3\n"); - /* * Hose scan. */ @@ -299,7 +261,27 @@ void pci_init_board(void) } #endif /* CONFIG_PCISLAVE */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(hose[0].first_busno); + tmp[1] = cpu_to_be32(hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +} +#elif defined(CONFIG_OF_FLAT_TREE) void ft_pci_setup(void *blob, bd_t *bd) { diff --git a/board/mpc832xemds/Makefile b/board/freescale/mpc8349emds/Makefile index 5ec7a871d..5ec7a871d 100644 --- a/board/mpc832xemds/Makefile +++ b/board/freescale/mpc8349emds/Makefile diff --git a/board/mpc8349emds/config.mk b/board/freescale/mpc8349emds/config.mk index edf64d150..edf64d150 100644 --- a/board/mpc8349emds/config.mk +++ b/board/freescale/mpc8349emds/config.mk diff --git a/board/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 521d1bbd4..39c091627 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -34,6 +34,8 @@ #endif #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> #endif int fixed_sdram(void); @@ -68,8 +70,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -88,7 +88,7 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -189,9 +189,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc= &immap->lbus; uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); - /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -253,26 +250,25 @@ void sdram_init(void) #else void sdram_init(void) { - puts(" SDRAM on Local Bus is NOT available!\n"); } #endif -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c index d6a12b82a..ae94a2f38 100644 --- a/board/mpc8349emds/pci.c +++ b/board/freescale/mpc8349emds/pci.c @@ -25,6 +25,12 @@ #include <pci.h> #include <asm/mpc8349_pci.h> #include <i2c.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + DECLARE_GLOBAL_DATA_PTR; @@ -382,7 +388,40 @@ pci_init_board(void) } -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) void ft_pci_setup(void *blob, bd_t *bd) { diff --git a/board/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile index 31bcdb864..31bcdb864 100644 --- a/board/mpc8349itx/Makefile +++ b/board/freescale/mpc8349itx/Makefile diff --git a/board/mpc8349itx/config.mk b/board/freescale/mpc8349itx/config.mk index 79f1765fa..79f1765fa 100644 --- a/board/mpc8349itx/config.mk +++ b/board/freescale/mpc8349itx/config.mk diff --git a/board/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 178b1d36f..c82f7847a 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -39,6 +39,8 @@ #endif #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> #endif #ifndef CONFIG_SPD_EEPROM @@ -74,7 +76,7 @@ int fixed_sdram(void) im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR; + im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; im->ddr.sdram_mode = (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); im->ddr.sdram_interval = @@ -160,7 +162,6 @@ long int initdram(int board_type) ddr_enable_ecc(msize * 1048576); #endif - puts(" DDR RAM: "); /* return total bus RAM size(bytes) */ return msize * 1024 * 1024; } @@ -385,22 +386,22 @@ int misc_init_r(void) return rc; } -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } +#endif + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif } #endif diff --git a/board/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c index e81ad2735..5ca094d4c 100644 --- a/board/mpc8349itx/pci.c +++ b/board/freescale/mpc8349itx/pci.c @@ -31,6 +31,8 @@ #include <i2c.h> #if defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> +#elif defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> #endif DECLARE_GLOBAL_DATA_PTR; @@ -332,8 +334,40 @@ void pci_init_board(void) #endif } -#endif /* CONFIG_PCI */ -#ifdef CONFIG_OF_FLAT_TREE +#if defined(CONFIG_OF_LIBFDT) +void +ft_pci_setup(void *blob, bd_t *bd) +{ + int nodeoffset; + int err; + int tmp[2]; + + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[0].first_busno); + tmp[1] = cpu_to_be32(pci_hose[0].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#ifdef CONFIG_MPC83XX_PCI2 + nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500"); + if (nodeoffset >= 0) { + tmp[0] = cpu_to_be32(pci_hose[1].first_busno); + tmp[1] = cpu_to_be32(pci_hose[1].last_busno); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); + } +#endif +} +#elif defined(CONFIG_OF_FLAT_TREE) void ft_pci_setup(void *blob, bd_t *bd) { @@ -355,3 +389,4 @@ ft_pci_setup(void *blob, bd_t *bd) #endif } #endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/mpc8349emds/Makefile b/board/freescale/mpc8360emds/Makefile index 5ec7a871d..ea52484c0 100644 --- a/board/mpc8349emds/Makefile +++ b/board/freescale/mpc8360emds/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o pci.o +COBJS := $(BOARD).o pci.o ../common/pq-mds-pib.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/mpc8360emds/config.mk b/board/freescale/mpc8360emds/config.mk index 9ace8860c..9ace8860c 100644 --- a/board/mpc8360emds/config.mk +++ b/board/freescale/mpc8360emds/config.mk diff --git a/board/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 3fa093d1d..e050cd439 100644 --- a/board/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -29,7 +29,9 @@ #include <ft_build.h> #elif defined(CONFIG_OF_LIBFDT) #include <libfdt.h> -#include <libfdt_env.h> +#endif +#if defined(CONFIG_PQ_MDS_PIB) +#include "../common/pq-mds-pib.h" #endif const qe_iop_conf_t qe_iop_conf_tab[] = { @@ -107,6 +109,14 @@ int board_early_init_f(void) return 0; } +int board_early_init_r(void) +{ +#ifdef CONFIG_PQ_MDS_PIB + pib_init(); +#endif + return 0; +} + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void ddr_enable_ecc(unsigned int dram_size); #endif @@ -139,7 +149,7 @@ long int initdram(int board_type) * Initialize SDRAM if it is on local bus. */ sdram_init(); - puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -224,8 +234,6 @@ void sdram_init(void) volatile lbus83xx_t *lbc = &immap->lbus; uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; - puts("\n SDRAM on Local Bus: "); - print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ @@ -281,36 +289,13 @@ void sdram_init(void) #else void sdram_init(void) { - puts("SDRAM on Local Bus is NOT available!\n"); } #endif -#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \ - && defined(CONFIG_OF_BOARD_SETUP) - -/* - * Prototypes of functions that we use. - */ -void ft_cpu_setup(void *blob, bd_t *bd); - -#ifdef CONFIG_PCI -void ft_pci_setup(void *blob, bd_t *bd); -#endif - -void -ft_board_setup(void *blob, bd_t *bd) +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) { -#if defined(CONFIG_OF_LIBFDT) - int nodeoffset; - int tmp[2]; - - nodeoffset = fdt_find_node_by_path(blob, "/memory"); - if (nodeoffset >= 0) { - tmp[0] = cpu_to_be32(bd->bi_memstart); - tmp[1] = cpu_to_be32(bd->bi_memsize); - fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); - } -#else +#if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; @@ -320,10 +305,9 @@ ft_board_setup(void *blob, bd_t *bd) *p = cpu_to_be32(bd->bi_memsize); } #endif - + ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif - ft_cpu_setup(blob, bd); } -#endif /* CONFIG_OF_x */ +#endif diff --git a/board/mpc8360emds/pci.c b/board/freescale/mpc8360emds/pci.c index 8f904710c..cf7ef9044 100644 --- a/board/mpc8360emds/pci.c +++ b/board/freescale/mpc8360emds/pci.c @@ -22,7 +22,6 @@ #include <ft_build.h> #elif defined(CONFIG_OF_LIBFDT) #include <libfdt.h> -#include <libfdt_env.h> #endif #include <asm/fsl_i2c.h> @@ -132,7 +131,6 @@ void pci_init_board(void) volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; - u8 val8, orig_i2c_bus; u16 reg16; u32 val32; u32 dev; @@ -201,43 +199,6 @@ void pci_init_board(void) PIWAR_IWS_2G; /* - * Assign PIB PMC slot to desired PCI bus - */ - - /* Switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - - val8 = 0xf3; /*PMC1, PMC2, PMC3 slot to PCI bus */ - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - asm("eieio"); - - /* Reset to original I2C bus */ - i2c_set_bus_num(orig_i2c_bus); - - /* * Release PCI RST Output signal */ udelay(2000); @@ -293,8 +254,6 @@ void pci_init_board(void) pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); - printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n"); - /* * Hose scan. */ @@ -314,7 +273,12 @@ ft_pci_setup(void *blob, bd_t *bd) if (nodeoffset >= 0) { tmp[0] = cpu_to_be32(hose[0].first_busno); tmp[1] = cpu_to_be32(hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp)); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); } } #elif defined(CONFIG_OF_FLAT_TREE) diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index f906b859a..d4547e24c 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -57,7 +57,6 @@ void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); -#ifdef CONFIG_ADD_RAM_INFO static u32 is_ecc_enabled(void) { u32 val; @@ -87,7 +86,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif static int wait_for_dlllock(void) { diff --git a/board/netstal/common/flash.c b/board/netstal/common/hcu_flash.c index be2cb3773..be2cb3773 100644 --- a/board/netstal/common/flash.c +++ b/board/netstal/common/hcu_flash.c diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile index d9825a5f2..af90821fa 100644 --- a/board/netstal/hcu4/Makefile +++ b/board/netstal/hcu4/Makefile @@ -22,16 +22,20 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -vpath flash.c ../common -COBJS = $(BOARD).o flash.o +vpath hcu_flash.c ../common + +# NOBJS : Netstal common objects +NOBJS = hcu_flash.o +COBJS = $(BOARD).o SOBJS = -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +NOBJS := $(addprefix $(obj),$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(SOBJS) $(NOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index 2b9560484..48a3f13ba 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -43,7 +43,7 @@ enum { HW_GENERATION_MCU25 = 0x09, }; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); long int spd_sdram(int(read_spd)(uint addr)); #ifdef CONFIG_SPD_EEPROM @@ -121,22 +121,24 @@ int checkboard (void) printf ("HCU3: index %d\n\n", index); else if (generation == HW_GENERATION_HCU4) printf ("HCU4: index %d\n\n", index); - /* GPIO here noch nicht richtig initialisert !!! */ - sysLedSet(0); + hcu_led_set(0); for (j = 0; j < 7; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(50 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { u32 tmp = ~value; u32 *ledReg; @@ -243,9 +245,9 @@ long int fixed_hcu4_sdram (int board_type) } /*---------------------------------------------------------------------------+ - * getSerialNr + * hcu_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 hcu_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; @@ -265,7 +267,7 @@ int misc_init_r(void) char *s = getenv("ethaddr"); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = hcu_serial_number(); for (i = 0; i < 6; ++i) { gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile index eee310b1a..27398b905 100644 --- a/board/netstal/hcu5/Makefile +++ b/board/netstal/hcu5/Makefile @@ -22,16 +22,20 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -vpath flash.c ../common -COBJS = $(BOARD).o sdram.o flash.o +vpath hcu_flash.c ../common + +# NOBJS : Netstal common objects +NOBJS = hcu_flash.o +COBJS = $(BOARD).o sdram.o SOBJS = init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +NOBJS := $(addprefix $(obj),$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(SOBJS) $(NOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 23df0814f..b9b10fdc2 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -22,10 +22,11 @@ #include <asm/processor.h> #include <ppc440.h> #include <asm/mmu.h> +#include <net.h> DECLARE_GLOBAL_DATA_PTR; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; @@ -41,7 +42,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define SDR0_ECID2 0x0082 #define SDR0_ECID3 0x0083 -#define SYS_IO_ADDRESS 0xcce00000 +#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000) +#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000) #define DEFAULT_ETH_ADDR "ethaddr" /* ethaddr for first or etha1ddr for second ethernet */ @@ -182,11 +184,14 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_BOARD_PRE_INIT int board_pre_init(void) { return board_early_init_f(); } +#endif + int checkboard(void) { unsigned int j; @@ -211,38 +216,51 @@ int checkboard(void) printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); for (j = 0;j < 6; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(200 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return in16(SYS_IO_ADDRESS) & 0x3f; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { out16(SYS_IO_ADDRESS, value); } /*---------------------------------------------------------------------------+ - * getSerialNr + * get_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 get_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; if (*serial == 0xffffffff) - return get_ticks(); + return 0; return *serial; } /*---------------------------------------------------------------------------+ + * hcu_get_slot + *---------------------------------------------------------------------------*/ +u32 hcu_get_slot(void) +{ + u16 *slot = (u16 *)SYS_SLOT_ADDRESS; + return (*slot) & 0x7f; +} + + +/*---------------------------------------------------------------------------+ * misc_init_r. *---------------------------------------------------------------------------*/ int misc_init_r(void) @@ -250,7 +268,7 @@ int misc_init_r(void) char *s = getenv(DEFAULT_ETH_ADDR); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = get_serial_number(); unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; @@ -272,8 +290,7 @@ int misc_init_r(void) gd->bd->bi_enetaddr[2] = 0x13; gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; - /* byte[5].bit 0 must be zero */ - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; + gd->bd->bi_enetaddr[5] = hcu_get_slot(); sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], @@ -283,6 +300,25 @@ int misc_init_r(void) setenv(DEFAULT_ETH_ADDR, ethaddr); } + /* IP-Adress update */ + { + IPaddr_t ipaddr; + char *ipstring; + + ipstring = getenv("ipaddr"); + if (ipstring == 0) + ipaddr = string_to_ip("172.25.1.99"); + else + ipaddr = string_to_ip(ipstring); + if ((ipaddr & 0xff) != (32 + hcu_get_slot())) { + char tmp[22]; + + ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot(); + ip_to_string (ipaddr, tmp); + printf("%s: enforce %s\n", __FUNCTION__, tmp); + setenv("ipaddr", tmp); + } + } #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, @@ -346,6 +382,7 @@ int misc_init_r(void) return 0; } +#if defined(CONFIG_PCI) /************************************************************************* * pci_pre_init * @@ -358,7 +395,6 @@ int misc_init_r(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -411,7 +447,6 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -421,7 +456,6 @@ int pci_pre_init(struct pci_controller *hose) * may not be sufficient for a given board. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /*-------------------------------------------------------------+ @@ -478,13 +512,11 @@ void pci_target_init(struct pci_controller *hose) pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ /************************************************************************* * pci_master_init * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; @@ -499,8 +531,6 @@ void pci_master_init(struct pci_controller *hose) temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } -#endif -/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ /************************************************************************* * is_pci_host @@ -517,9 +547,8 @@ void pci_master_init(struct pci_controller *hose) * * ************************************************************************/ -#if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { return 1; } -#endif /* defined(CONFIG_PCI) */ +#endif /* defined(CONFIG_PCI) */ diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 40391958d..9ee9ab599 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -36,7 +36,7 @@ #include <asm/mmu.h> #include <ppc440.h> -void sysLedSet(u32 value); +void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); @@ -70,7 +70,6 @@ void dflush(void); void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -99,7 +98,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif /*-------------------------------------------------------------------- * wait_for_dlllock. @@ -138,7 +136,7 @@ static int wait_for_dlllock(void) void sdram_panic(const char *reason) { printf("\n%s: reason %s", __FUNCTION__, reason); - sysLedSet(0xff); + hcu_led_set(0xff); while (1) { } /* Never return */ @@ -197,6 +195,13 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes, mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + /* + * Clear possible errors + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + mtspr(mcsr, mfspr(mcsr)); + /* Set 'int_mask' parameter to functionnal value */ mfsdram(DDR0_01, val); mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | @@ -244,7 +249,6 @@ long int initdram (int board_type) sdram_panic(INVALID_HW_CONFIG); break; } - dram_size -= 16 * 1024 * 1024; mtsdram(DDR0_07, 0x00090100); /* * TCPD=200 cycles of clock input is required to lock the DLL. @@ -283,6 +287,7 @@ long int initdram (int board_type) /* * Program tlb entries for this size (dynamic) */ + remove_tlb(CFG_SDRAM_BASE, 256 << 20); program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); /* @@ -291,6 +296,8 @@ long int initdram (int board_type) */ program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0); + /* Diminish RAM to initialize */ + dram_size = dram_size - 32 ; #ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 4cd447e09..86166ea44 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -64,8 +64,6 @@ long int initdram (int board_type) if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) return -1; - puts("Initializing\n"); - /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) @@ -84,7 +82,6 @@ long int initdram (int board_type) */ ddr_enable_ecc(msize * 1024 * 1024); #endif - puts(" DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } @@ -130,7 +127,7 @@ int fixed_sdram(void) #if defined(CONFIG_DDR_2T_TIMING) | SDRAM_CFG_2T_EN #endif - | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; + | SDRAM_CFG_SDRAM_TYPE_DDR1; #if defined (CONFIG_DDR_32BIT) /* for 32-bit mode burst length is 8 */ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index 9c35e22c8..7d0b05548 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -114,7 +114,7 @@ long int initdram (int board_type) /* enable DDR controller */ im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN | SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR); + SDRAM_CFG_SDRAM_TYPE_DDR1); SYNC; /* size detection */ @@ -388,7 +388,7 @@ static void set_ddr_config(void) { /* don't enable DDR controller yet */ im->ddr.sdram_cfg = SDRAM_CFG_SREN | - SDRAM_CFG_SDRAM_TYPE_DDR; + SDRAM_CFG_SDRAM_TYPE_DDR1; SYNC; /* Set SDRAM mode */ diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index adf808301..e634f0a25 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -35,12 +35,10 @@ #include <ft_build.h> #elif defined(CONFIG_OF_LIBFDT) #include <libfdt.h> -#include <libfdt_env.h> #endif DECLARE_GLOBAL_DATA_PTR; - int checkcpu(void) { volatile immap_t *immr; @@ -333,9 +331,7 @@ void watchdog_reset (void) */ static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6); } @@ -345,9 +341,7 @@ static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd) /* second onboard ethernet port */ static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6); } @@ -358,9 +352,7 @@ static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd) /* third onboard ethernet port */ static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6); } @@ -371,9 +363,7 @@ static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd) /* fourth onboard ethernet port */ static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd) { - /* - * Fix it up if it exists, don't create it if it doesn't exist. - */ + /* Fix it up if it exists, don't create it if it doesn't exist */ if (fdt_get_property(blob, nodeoffset, name, 0)) { return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6); } @@ -384,9 +374,7 @@ static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd) static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) { u32 tmp; - /* - * Create or update the property. - */ + /* Create or update the property */ tmp = cpu_to_be32(bd->bi_busfreq); return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); } @@ -394,14 +382,38 @@ static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *b static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) { u32 tmp; - /* - * Create or update the property. - */ + /* Create or update the property */ tmp = cpu_to_be32(OF_TBCLK); return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); } +static int fdt_set_clockfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) +{ + u32 tmp; + /* Create or update the property */ + tmp = cpu_to_be32(gd->core_clk); + return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); +} + +#ifdef CONFIG_QE +static int fdt_set_qe_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) +{ + u32 tmp; + /* Create or update the property */ + tmp = cpu_to_be32(gd->qe_clk); + return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); +} + +static int fdt_set_qe_brgfreq(void *blob, int nodeoffset, const char *name, bd_t *bd) +{ + u32 tmp; + /* Create or update the property */ + tmp = cpu_to_be32(gd->brg_clk); + return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp)); +} +#endif + /* * Fixups to the fdt. */ @@ -420,6 +432,10 @@ static const struct { }, { "/cpus/" OF_CPU, "clock-frequency", + fdt_set_clockfreq + }, + { "/" OF_SOC, + "bus-frequency", fdt_set_busfreq }, { "/" OF_SOC "/serial@4500", @@ -450,6 +466,15 @@ static const struct { fdt_set_eth1 }, #endif +#ifdef CONFIG_QE + { "/" OF_QE, + "brg-frequency", + fdt_set_qe_brgfreq + }, + { "/" OF_QE, + "bus-frequency", + fdt_set_qe_busfreq + }, #ifdef CONFIG_UEC_ETH1 #if CFG_UEC1_UCC_NUM == 0 /* UCC1 */ { "/" OF_QE "/ucc@2000", @@ -481,7 +506,7 @@ static const struct { "local-mac-address", fdt_set_eth1 }, -#elif CFG_UEC1_UCC_NUM == 3 /* UCC4 */ +#elif CFG_UEC2_UCC_NUM == 3 /* UCC4 */ { "/" OF_QE "/ucc@3200", "mac-address", fdt_set_eth1 @@ -492,14 +517,16 @@ static const struct { }, #endif #endif /* CONFIG_UEC_ETH2 */ +#endif /* CONFIG_QE */ }; void ft_cpu_setup(void *blob, bd_t *bd) { - int nodeoffset; - int err; - int j; + int nodeoffset; + int err; + int j; + int tmp[2]; for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) { nodeoffset = fdt_find_node_by_path(blob, fixup_props[j].node); @@ -508,15 +535,29 @@ ft_cpu_setup(void *blob, bd_t *bd) fixup_props[j].prop, bd); if (err < 0) debug("Problem setting %s = %s: %s\n", - fixup_props[j].node, - fixup_props[j].prop, - fdt_strerror(err)); + fixup_props[j].node, fixup_props[j].prop, + fdt_strerror(err)); } else { debug("Couldn't find %s: %s\n", - fixup_props[j].node, - fdt_strerror(nodeoffset)); + fixup_props[j].node, fdt_strerror(nodeoffset)); } } + + /* update, or add and update /memory node */ + nodeoffset = fdt_find_node_by_path(blob, "/memory"); + if (nodeoffset < 0) { + nodeoffset = fdt_add_subnode(blob, 0, "memory"); + if (nodeoffset < 0) + debug("failed to add /memory node: %s\n", + fdt_strerror(nodeoffset)); + } + if (nodeoffset >= 0) { + fdt_setprop(blob, nodeoffset, "device_type", + "memory", sizeof("memory")); + tmp[0] = cpu_to_be32(bd->bi_memstart); + tmp[1] = cpu_to_be32(bd->bi_memsize); + fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp)); + } } #elif defined(CONFIG_OF_FLAT_TREE) void diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c index 229821887..5675afe97 100644 --- a/cpu/mpc83xx/pci.c +++ b/cpu/mpc83xx/pci.c @@ -28,7 +28,6 @@ #if defined(CONFIG_OF_LIBFDT) #include <libfdt.h> -#include <libfdt_env.h> #elif defined(CONFIG_OF_FLAT_TREE) #include <ft_build.h> #endif @@ -184,7 +183,12 @@ void ft_pci_setup(void *blob, bd_t *bd) if (nodeoffset >= 0) { tmp[0] = cpu_to_be32(pci_hose[0].first_busno); tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp)); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); } if (pci_num_buses < 2) @@ -194,7 +198,12 @@ void ft_pci_setup(void *blob, bd_t *bd) if (nodeoffset >= 0) { tmp[0] = cpu_to_be32(pci_hose[0].first_busno); tmp[1] = cpu_to_be32(pci_hose[0].last_busno); - err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp)); + err = fdt_setprop(blob, nodeoffset, "bus-range", + tmp, sizeof(tmp)); + + tmp[0] = cpu_to_be32(gd->pci_clk); + err = fdt_setprop(blob, nodeoffset, "clock-frequency", + tmp, sizeof(tmp[0])); } } #elif CONFIG_OF_FLAT_TREE diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 54f0c83d4..ee2d0385e 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,6 +34,30 @@ #include <asm/mmu.h> #include <spd_sdram.h> +void board_add_ram_info(int use_default) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) + >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); + + if (ddr->sdram_cfg & SDRAM_CFG_32_BE) + puts(", 32-bit"); + else + puts(", 64-bit"); + + if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) + puts(", ECC on)"); + else + puts(", ECC off)"); + +#if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) + puts("\nSDRAM: "); + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)"); +#endif +} + #ifdef CONFIG_SPD_EEPROM DECLARE_GLOBAL_DATA_PTR; @@ -109,7 +133,7 @@ long int spd_sdram() unsigned int n_ranks; unsigned int odt_rd_cfg, odt_wr_cfg; unsigned char twr_clk, twtr_clk; - unsigned char sdram_type; + unsigned int sdram_type; unsigned int memsize; unsigned int law_size; unsigned char caslat, caslat_ctrl; @@ -137,7 +161,7 @@ long int spd_sdram() #endif /* Check the memory type */ if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) { - printf("DDR: Module mem type is %02X\n", spd.mem_type); + debug("DDR: Module mem type is %02X\n", spd.mem_type); return 0; } @@ -578,17 +602,17 @@ long int spd_sdram() burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ else burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 32 bit"); + debug("\n DDR DIMM: data bus width is 32 bit"); } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ - printf("\n DDR DIMM: data bus width is 64 bit"); + debug("\n DDR DIMM: data bus width is 64 bit"); } /* Is this an ECC DDR chip? */ if (spd.config == 0x02) - printf(" with ECC\n"); + debug(" with ECC\n"); else - printf(" without ECC\n"); + debug(" without ECC\n"); /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus, Burst type is sequential @@ -718,26 +742,26 @@ long int spd_sdram() * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts) */ if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_type = 2; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1; else - sdram_type = 3; + sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2; sdram_cfg = (0 - | (1 << 31) /* DDR enable */ - | (1 << 30) /* Self refresh */ - | (sdram_type << 24) /* SDRAM type */ + | SDRAM_CFG_MEM_EN /* DDR enable */ + | SDRAM_CFG_SREN /* Self refresh */ + | sdram_type /* SDRAM type */ ); /* sdram_cfg[3] = RD_EN - registered DIMM enable */ if (spd.mod_attr & 0x02) - sdram_cfg |= 0x10000000; + sdram_cfg |= SDRAM_CFG_RD_EN; /* The DIMM is 32bit width */ if (spd.dataw_lsb == 0x20) { if (spd.mem_type == SPD_MEMTYPE_DDR) - sdram_cfg |= 0x000C0000; + sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE; if (spd.mem_type == SPD_MEMTYPE_DDR2) - sdram_cfg |= 0x00080000; + sdram_cfg |= SDRAM_CFG_32_BE; } ddrc_ecc_enable = 0; @@ -758,7 +782,7 @@ long int spd_sdram() debug("DDR:err_disable=0x%08x\n", ddr->err_disable); debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe); #endif - printf(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); + debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF"); #if defined(CONFIG_DDR_2T_TIMING) /* diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index bf3061654..cba57fadb 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -351,6 +351,7 @@ int get_clocks(void) gd->qe_clk = qe_clk; gd->brg_clk = brg_clk; #endif + gd->pci_clk = pci_sync_in; gd->cpu_clk = gd->core_clk; gd->bus_clk = gd->csb_clk; return 0; diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 18b90ba5a..67ba5bdef 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -621,7 +621,6 @@ static void get_spd_info(unsigned long *dimm_populated, } } -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -642,7 +641,6 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } -#endif /*------------------------------------------------------------------ * For the memory DIMMs installed, this routine verifies that they diff --git a/drivers/pci.c b/drivers/pci.c index 41589192c..50ca6b0ba 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -82,8 +82,10 @@ int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ { \ u32 val32; \ \ - if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ return -1; \ + } \ \ *val = (val32 >> ((offset & (int)off_mask) * 8)); \ \ diff --git a/include/common.h b/include/common.h index 27a660a4d..9a5a0ab79 100644 --- a/include/common.h +++ b/include/common.h @@ -434,6 +434,13 @@ int checkdcache (void); void upmconfig (unsigned int, unsigned int *, unsigned int); ulong get_tbclk (void); void reset_cpu (ulong addr); +#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) +void ft_cpu_setup(void *blob, bd_t *bd); +#ifdef CONFIG_PCI +void ft_pci_setup(void *blob, bd_t *bd); +#endif +#endif + /* $(CPU)/serial.c */ int serial_init (void); diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 377503782..36b0f160b 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -113,12 +113,12 @@ /* 0x03200064 */ #if defined(CONFIG_DDR_2T_TIMING) #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_2T_EN \ | SDRAM_CFG_DBW_32 ) #else #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ - | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | SDRAM_CFG_32_BE ) /* 0x43080000 */ #endif @@ -228,7 +228,7 @@ #define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f62ca2c42..efc317288 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -30,6 +30,8 @@ #define CONFIG_MPC83XX 1 /* MPC83xx family */ #define CONFIG_MPC832X 1 /* MPC832x CPU specific */ #define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -87,6 +89,7 @@ #define CFG_SICRL 0x00000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -315,7 +318,7 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 48616c08b..c1f1c747c 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -339,7 +339,7 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index c5d036296..3311d5c1f 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -296,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE +#define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP /* maximum size of the flat tree (8K) */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 4b32a140e..094b66e7c 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -32,6 +32,8 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ +#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ +#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ /* * System Clock Setup @@ -88,6 +90,7 @@ #define CFG_SICRL 0x40000000 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_R /* * IMMR new address @@ -309,13 +312,13 @@ /* * CS4 on Local Bus, to PIB */ -#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */ +#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */ #define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* * CS5 on Local Bus, to PIB */ -#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */ +#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */ #define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */ /* diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index a330c4220..2f23c5049 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -94,7 +94,6 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index d0bf2516e..f95d78ec1 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -43,7 +43,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 110ad44ee..b6d0f519a 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -42,7 +42,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 26dbec92e..a09dd7473 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -39,7 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 604b7d12f..7116c49c7 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -35,7 +35,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8ae38cb27..bec442d98 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -60,7 +60,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 3f75a441a..824a81240 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -343,6 +343,11 @@ #define CONFIG_CMD_USB #endif +#ifndef CONFIG_RAINIER +#define CFG_POST_FPU_ON CFG_POST_FPU +#else +#define CFG_POST_FPU_ON 0 +#endif /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ @@ -350,7 +355,7 @@ CFG_POST_UART | \ CFG_POST_I2C | \ CFG_POST_CACHE | \ - CFG_POST_FPU | \ + CFG_POST_FPU_ON | \ CFG_POST_ETHER | \ CFG_POST_SPR) diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 9c536fd12..906f046fa 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -46,7 +46,6 @@ #define EXTCLK_83 83333333 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 829dbf938..4d32c6a37 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -705,8 +705,9 @@ #define SDRAM_CFG_SREN 0x40000000 #define SDRAM_CFG_ECC_EN 0x20000000 #define SDRAM_CFG_RD_EN 0x10000000 -#define SDRAM_CFG_SDRAM_TYPE 0x03000000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c87d46c3d..9aa67f93c 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -209,9 +209,12 @@ static int init_baudrate (void) /***********************************************************************/ -#ifdef CONFIG_ADD_RAM_INFO -void board_add_ram_info(int); -#endif +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} +void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); + static int init_func_ram (void) { @@ -224,9 +227,7 @@ static int init_func_ram (void) if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); -#ifdef CONFIG_ADD_RAM_INFO board_add_ram_info(0); -#endif putc('\n'); return (0); } |