summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/LaCie/common/common.c87
-rw-r--r--board/LaCie/common/common.h20
-rw-r--r--board/LaCie/edminiv2/Makefile5
-rw-r--r--board/LaCie/edminiv2/edminiv2.c30
-rw-r--r--board/LaCie/edminiv2/edminiv2.h41
-rw-r--r--board/LaCie/net2big_v2/Makefile5
-rw-r--r--board/LaCie/net2big_v2/net2big_v2.c86
-rw-r--r--board/LaCie/net2big_v2/net2big_v2.h8
-rw-r--r--board/LaCie/netspace_v2/Makefile5
-rw-r--r--board/LaCie/netspace_v2/netspace_v2.c84
-rw-r--r--board/LaCie/netspace_v2/netspace_v2.h8
-rw-r--r--boards.cfg8
-rw-r--r--include/configs/lacie_kw.h (renamed from include/configs/netspace_v2.h)28
-rw-r--r--include/configs/net2big_v2.h161
14 files changed, 168 insertions, 408 deletions
diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c
new file mode 100644
index 000000000..dc5350dc2
--- /dev/null
+++ b/board/LaCie/common/common.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+void mv_phy_88e1116_init(const char *name)
+{
+ u16 reg;
+ u16 devadr;
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..(%s) could not read PHY dev address\n", __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ printf("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */
+
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
+int lacie_read_mac_address(uchar *mac_addr)
+{
+ int ret;
+ ushort version;
+
+ /* I2C-0 for on-board EEPROM */
+ i2c_set_bus_num(0);
+
+ /* Check layout version for EEPROM data */
+ ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
+ (uchar *) &version, 2);
+ if (ret != 0) {
+ printf("Error: failed to read I2C EEPROM @%02x\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR);
+ return ret;
+ }
+ version = be16_to_cpu(version);
+ if (version < 1 || version > 3) {
+ printf("Error: unknown version %d for EEPROM data\n",
+ version);
+ return -1;
+ }
+
+ /* Read Ethernet MAC address from EEPROM */
+ ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac_addr, 6);
+ if (ret != 0)
+ printf("Error: failed to read I2C EEPROM @%02x\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR);
+ return ret;
+}
+#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_EEPROM_ADDR */
diff --git a/board/LaCie/common/common.h b/board/LaCie/common/common.h
new file mode 100644
index 000000000..82a952223
--- /dev/null
+++ b/board/LaCie/common/common.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _LACIE_COMMON_H
+#define _LACIE_COMMON_H
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+void mv_phy_88e1116_init(const char *name);
+#endif
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
+int lacie_read_mac_address(uchar *mac);
+#endif
+
+#endif /* _LACIE_COMMON_H */
diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile
index 00a255d5f..c8d45f46f 100644
--- a/board/LaCie/edminiv2/Makefile
+++ b/board/LaCie/edminiv2/Makefile
@@ -26,10 +26,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
LIB = $(obj)lib$(BOARD).o
-COBJS := edminiv2.o
+COBJS := edminiv2.o ../common/common.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
index ee2689332..c1a01bc61 100644
--- a/board/LaCie/edminiv2/edminiv2.c
+++ b/board/LaCie/edminiv2/edminiv2.c
@@ -27,7 +27,6 @@
#include <common.h>
#include <miiphy.h>
#include <asm/arch/orion5x.h>
-#include "edminiv2.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -96,33 +95,6 @@ int board_init(void)
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)
{
- u16 reg;
- u16 devadr;
- char *name = "egiga0";
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* command to read PHY dev address */
- if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
- printf("Err..%s could not read PHY dev address\n",
- __func__);
- return;
- }
-
- /*
- * Enable RGMII delay on Tx and Rx for CPU port
- * Ref: sec 4.7.2 of chip datasheet
- */
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
- /* reset the phy */
- miiphy_reset(name, devadr);
-
- printf("88E1116 Initialized on %s\n", name);
+ mv_phy_88e1116_init("egiga0");
}
#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/LaCie/edminiv2/edminiv2.h b/board/LaCie/edminiv2/edminiv2.h
deleted file mode 100644
index 88e62b229..000000000
--- a/board/LaCie/edminiv2/edminiv2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2009
- * Net Insight <www.netinsight.net>
- * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
- *
- * Based on sheevaplug.h:
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef __EDMINIV2_BASE_H
-#define __EDMINIV2_BASE_H
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
-#endif /* __EDMINIV2_BASE_H */
diff --git a/board/LaCie/net2big_v2/Makefile b/board/LaCie/net2big_v2/Makefile
index 4bacef4da..fbae48ef2 100644
--- a/board/LaCie/net2big_v2/Makefile
+++ b/board/LaCie/net2big_v2/Makefile
@@ -21,10 +21,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
LIB = $(obj)lib$(BOARD).o
-COBJS := net2big_v2.o
+COBJS := $(BOARD).o ../common/common.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c
index 16d140547..d0b4adffc 100644
--- a/board/LaCie/net2big_v2/net2big_v2.c
+++ b/board/LaCie/net2big_v2/net2big_v2.c
@@ -21,15 +21,14 @@
*/
#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <command.h>
-#include <i2c.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include <asm/arch/gpio.h>
+
#include "net2big_v2.h"
+#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -92,91 +91,29 @@ int board_init(void)
return 0;
}
+#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
-#ifdef CONFIG_CMD_I2C
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
if (!getenv("ethaddr")) {
- ushort version;
uchar mac[6];
- int ret;
-
- /* I2C-0 for on-board EEPROM */
- i2c_set_bus_num(0);
-
- /* Check layout version for EEPROM data */
- ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- (uchar *) &version, 2);
- if (ret != 0) {
- printf("Error: failed to read I2C EEPROM @%02x\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
- return ret;
- }
- version = be16_to_cpu(version);
- if (version < 1 || version > 3) {
- printf("Error: unknown version %d for EEPROM data\n",
- version);
- return -1;
- }
-
- /* Read Ethernet MAC address from EEPROM */
- ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac, 6);
- if (ret != 0) {
- printf("Error: failed to read I2C EEPROM @%02x\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
- return ret;
- }
- eth_setenv_enetaddr("ethaddr", mac);
+ if (lacie_read_mac_address(mac) == 0)
+ eth_setenv_enetaddr("ethaddr", mac);
}
-#endif /* CONFIG_CMD_I2C */
-
+#endif
return 0;
}
+#endif
-void mv_phy_88e1116_init(char *name)
-{
- u16 reg;
- u16 devadr;
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* command to read PHY dev address */
- if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
- printf("Err..(%s) could not read PHY dev address\n", __func__);
- return;
- }
-
- /*
- * Enable RGMII delay on Tx and Rx for CPU port
- * Ref: sec 4.7.2 of chip datasheet
- */
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
- /* reset the phy */
- if (miiphy_read(name, devadr, MII_BMCR, &reg) != 0) {
- printf("Err..(%s) PHY status read failed\n", __func__);
- return;
- }
- if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) {
- printf("Err..(%s) PHY reset failed\n", __func__);
- return;
- }
-
- debug("88E1116 Initialized on %s\n", name);
-}
-
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and initialize PHY */
void reset_phy(void)
{
mv_phy_88e1116_init("egiga0");
}
+#endif
+#if defined(CONFIG_KIRKWOOD_GPIO)
/* Return GPIO push button status */
static int
do_read_push_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -186,3 +123,4 @@ do_read_push_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(button, 1, 1, do_read_push_button,
"Return GPIO push button status 0=off 1=on", "");
+#endif
diff --git a/board/LaCie/net2big_v2/net2big_v2.h b/board/LaCie/net2big_v2/net2big_v2.h
index bbe67afab..f9778f4f0 100644
--- a/board/LaCie/net2big_v2/net2big_v2.h
+++ b/board/LaCie/net2big_v2/net2big_v2.h
@@ -32,12 +32,4 @@
/* Buttons */
#define NET2BIG_V2_GPIO_PUSH_BUTTON 34
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
#endif /* NET2BIG_V2_H */
diff --git a/board/LaCie/netspace_v2/Makefile b/board/LaCie/netspace_v2/Makefile
index d4a613fb6..b43c3d3bf 100644
--- a/board/LaCie/netspace_v2/Makefile
+++ b/board/LaCie/netspace_v2/Makefile
@@ -21,10 +21,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
LIB = $(obj)lib$(BOARD).o
-COBJS := netspace_v2.o
+COBJS := $(BOARD).o ../common/common.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c
index 6938a4370..fbf020fde 100644
--- a/board/LaCie/netspace_v2/netspace_v2.c
+++ b/board/LaCie/netspace_v2/netspace_v2.c
@@ -21,15 +21,14 @@
*/
#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <command.h>
-#include <i2c.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include <asm/arch/gpio.h>
+
#include "netspace_v2.h"
+#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -90,91 +89,29 @@ int board_init(void)
return 0;
}
+#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
if (!getenv("ethaddr")) {
- ushort version;
uchar mac[6];
- int ret;
-
- /* I2C-0 for on-board EEPROM */
- i2c_set_bus_num(0);
-
- /* Check layout version for EEPROM data */
- ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- (uchar *) &version, 2);
- if (ret != 0) {
- printf("Error: failed to read I2C EEPROM @%02x\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
- return ret;
- }
- version = be16_to_cpu(version);
- if (version < 1 || version > 3) {
- printf("Error: unknown version %d for EEPROM data\n",
- version);
- return -1;
- }
-
- /* Read Ethernet MAC address from EEPROM */
- ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac, 6);
- if (ret != 0) {
- printf("Error: failed to read I2C EEPROM @%02x\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
- return ret;
- }
- eth_setenv_enetaddr("ethaddr", mac);
+ if (lacie_read_mac_address(mac) == 0)
+ eth_setenv_enetaddr("ethaddr", mac);
}
-#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_EEPROM_ADDR */
-
+#endif
return 0;
}
+#endif
-void mv_phy_88e1116_init(char *name)
-{
- u16 reg;
- u16 devadr;
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* command to read PHY dev address */
- if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
- printf("Err..(%s) could not read PHY dev address\n", __func__);
- return;
- }
-
- /*
- * Enable RGMII delay on Tx and Rx for CPU port
- * Ref: sec 4.7.2 of chip datasheet
- */
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
- /* reset the phy */
- if (miiphy_read(name, devadr, MII_BMCR, &reg) != 0) {
- printf("Err..(%s) PHY status read failed\n", __func__);
- return;
- }
- if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) {
- printf("Err..(%s) PHY reset failed\n", __func__);
- return;
- }
-
- debug("88E1116 Initialized on %s\n", name);
-}
-
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and initialize PHY */
void reset_phy(void)
{
mv_phy_88e1116_init("egiga0");
}
+#endif
+#if defined(CONFIG_KIRKWOOD_GPIO)
/* Return GPIO button status */
static int
do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -184,3 +121,4 @@ do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(button, 1, 1, do_read_button,
"Return GPIO button status 0=off 1=on", "");
+#endif
diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h
index 3f3d51ccd..34e492c77 100644
--- a/board/LaCie/netspace_v2/netspace_v2.h
+++ b/board/LaCie/netspace_v2/netspace_v2.h
@@ -31,12 +31,4 @@
#define NETSPACE_V2_GPIO_BUTTON 32
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
#endif /* NETSPACE_V2_H */
diff --git a/boards.cfg b/boards.cfg
index d16789b9b..9869dd63f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -140,10 +140,10 @@ km_kirkwood arm arm926ejs km_arm keymile
km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX
mgcoge3un arm arm926ejs km_arm keymile kirkwood
portl2 arm arm926ejs km_arm keymile kirkwood
-inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:INETSPACE_V2
-net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood
-netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:NETSPACE_V2
-netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:NETSPACE_MAX_V2
+inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2
+net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2
+netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2
+netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2
dreamplug arm arm926ejs - Marvell kirkwood
guruplug arm arm926ejs - Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
diff --git a/include/configs/netspace_v2.h b/include/configs/lacie_kw.h
index 1ddf4b4b6..6cbc752fb 100644
--- a/include/configs/netspace_v2.h
+++ b/include/configs/lacie_kw.h
@@ -15,8 +15,8 @@
* GNU General Public License for more details.
*/
-#ifndef _CONFIG_NETSPACE_V2_H
-#define _CONFIG_NETSPACE_V2_H
+#ifndef _CONFIG_LACIE_KW_H
+#define _CONFIG_LACIE_KW_H
/*
* Machine number definition
@@ -30,6 +30,9 @@
#elif defined(CONFIG_NETSPACE_MAX_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
#define CONFIG_IDENT_STRING " NS Max v2"
+#elif defined(CONFIG_NET2BIG_V2)
+#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
+#define CONFIG_IDENT_STRING " 2Big v2"
#else
#error "Unknown board"
#endif
@@ -56,11 +59,19 @@
#define CONFIG_CMD_USB
/*
- * Core clock definition.
+ * Core clock definition
*/
#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
+/*
+ * SDRAM configuration
+ */
+#if defined(CONFIG_NET2BIG_V2)
+#define CONFIG_NR_DRAM_BANKS 2
+#else
#define CONFIG_NR_DRAM_BANKS 1
+#endif
+
#ifdef CONFIG_INETSPACE_V2
/* Different SDRAM configuration and size for Internet Space v2 */
#define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg)
@@ -81,7 +92,11 @@
#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
+#if defined(CONFIG_NET2BIG_V2)
+#define CONFIG_SYS_PROMPT "2big2> "
+#else
#define CONFIG_SYS_PROMPT "ns2> "
+#endif
/*
* Ethernet Driver configuration
@@ -97,11 +112,10 @@
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-/* Network Space Max v2 use 2 SATA ports */
-#ifdef CONFIG_NETSPACE_MAX_V2
+#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2)
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif
-#endif
+#endif /* CONFIG_MVSATA_IDE */
/*
* Enable GPI0 support
@@ -176,4 +190,4 @@
"usbload=usb start && " \
"fatload usb 0:1 $loadaddr /boot/$bootfile\0"
-#endif /* _CONFIG_NETSPACE_V2_H */
+#endif /* _CONFIG_LACIE_KW_H */
diff --git a/include/configs/net2big_v2.h b/include/configs/net2big_v2.h
deleted file mode 100644
index 9cf76d043..000000000
--- a/include/configs/net2big_v2.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _CONFIG_NET2BIG_V2_H
-#define _CONFIG_NET2BIG_V2_H
-
-/*
- * Machine number information
- */
-#define CONFIG_IDENT_STRING " 2Big v2"
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD /* SOC Family Name */
-#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_MACH_NET2BIG_V2 /* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_USB
-
-/*
- * Core clock definition.
- */
-#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#include "mv-common.h"
-
-/* Remove or override few declarations from mv-common.h */
-#undef CONFIG_RBTREE
-#undef CONFIG_ENV_SPI_MAX_HZ
-#undef CONFIG_SYS_IDE_MAXBUS
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#undef CONFIG_SYS_PROMPT
-#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_PROMPT "2big2> "
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */
-#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_NETCONSOLE
-#endif
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif
-
-/*
- * Enable GPI0 support
- */
-#define CONFIG_KIRKWOOD_GPIO
-
-/*
- * Enable I2C support
- */
-#ifdef CONFIG_CMD_I2C
-/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
-#endif /* CONFIG_CMD_I2C */
-
-/*
- * File systems support
- */
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
-/*
- * Use the HUSH parser
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-/*
- * Console configuration
- */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/*
- * Enable device tree support
- */
-#define CONFIG_OF_LIBFDT
-
-/*
- * Environment variables configurations
- */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */
-#define CONFIG_ENV_SIZE 0x1000 /* 4KB */
-#define CONFIG_ENV_ADDR 0x70000
-#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
-
-/*
- * Default environment variables
- */
-#define CONFIG_BOOTARGS "console=ttyS0,115200"
-
-#define CONFIG_BOOTCOMMAND \
- "dhcp && run netconsole; " \
- "if run usbload || run diskload; then bootm; fi"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0" \
- "bootfile=uImage\0" \
- "loadaddr=0x800000\0" \
- "autoload=no\0" \
- "netconsole=" \
- "set stdin $stdin,nc; " \
- "set stdout $stdout,nc; " \
- "set stderr $stderr,nc;\0" \
- "diskload=ide reset && " \
- "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
- "usbload=usb start && " \
- "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
-
-#endif /* _CONFIG_NET2BIG_V2_H */
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 18:03:19 +0000