diff options
110 files changed, 1683 insertions, 1529 deletions
@@ -2403,20 +2403,7 @@ MVBLM7_config: unconfig sbc8349_config \ sbc8349_PCI_33_config \ sbc8349_PCI_66_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _PCI_,$@)" ] ; then \ - $(XECHO) -n "... PCI HOST at " ; \ - echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ - fi ; \ - if [ "$(findstring _33_,$@)" ] ; then \ - $(XECHO) -n "33MHz... " ; \ - echo "#define PCI_33M" >>$(obj)include/config.h ; \ - fi ; \ - if [ "$(findstring _66_,$@)" ] ; then \ - $(XECHO) -n "66MHz... " ; \ - echo "#define PCI_66M" >>$(obj)include/config.h ; \ - fi ; - @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349 + @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349 SIMPC8313_LP_config \ SIMPC8313_SP_config: unconfig diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 0db619952..482561122 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -78,12 +78,12 @@ int board_early_init_f(void) mfsdr(SDR0_ULTRA1, reg); mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE); - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000010); - mtdcr(uicpr, 0xFE7FFFF0); /* set int polarities */ - mtdcr(uictr, 0x00000010); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000010); + mtdcr(UIC0PR, 0xFE7FFFF0); /* set int polarities */ + mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 2ffd720d5..38186a5d3 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -392,21 +392,21 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ /*-------------------------------------------------------------------- * Setup the GPIO pins diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c index d0aebec2c..49eadb921 100644 --- a/board/amcc/bubinga/bubinga.c +++ b/board/amcc/bubinga/bubinga.c @@ -29,12 +29,12 @@ long int spd_sdram(void); int board_early_init_f(void) { - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000010); - mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */ - mtdcr(uictr, 0x00000010); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000010); + mtdcr(UIC0PR, 0xFFFF7FF0); /* set int polarities */ + mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * Configure CPC0_PCI to enable PerWE as output diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 3a03f3073..f359d2377 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -116,37 +116,37 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(uic3sr, 0xffffffff); /* clear all */ - mtdcr(uic3er, 0x00000000); /* disable all */ - mtdcr(uic3cr, 0x00000000); /* all non-critical */ - mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic3tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic3sr, 0xffffffff); /* clear all */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ + mtdcr(UIC3ER, 0x00000000); /* disable all */ + mtdcr(UIC3CR, 0x00000000); /* all non-critical */ + mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ #if !defined(CONFIG_ARCHES) /* SDR Setting - enable NDFC */ diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index 2439b03a9..e61b5de2d 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -71,21 +71,21 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ return 0; } @@ -131,11 +131,11 @@ long int fixed_sdram(void) /*-------------------------------------------------------------------- * Setup some default *------------------------------------------------------------------*/ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ /*-------------------------------------------------------------------- * Setup for board-specific specific mem @@ -143,20 +143,20 @@ long int fixed_sdram(void) /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ + mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram(SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ /* RA=10 RD=3 */ - mtsdram(mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram(mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ + mtsdram(SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ + mtsdram(SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ + mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ udelay(400); /* Delay 200 usecs (min) */ /*-------------------------------------------------------------------- * Enable the controller, then wait for DCEN to complete *------------------------------------------------------------------*/ - mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ + mtsdram(SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ for (;;) { - mfsdram(mem_mcsts, reg); + mfsdram(SDRAM0_MCSTS, reg); if (reg & 0x80000000) break; } diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 1a45056da..bcef70740 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -183,42 +183,42 @@ int board_early_init_f (void) * Set critical interrupt values. Set interrupt polarities. Set interrupt * trigger levels. Make bit 0 High priority. Clear all interrupts again. *------------------------------------------------------------------------*/ - mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic3er, 0x00000000); /* disable all interrupts */ - mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */ - mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/ - mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/ - mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/ + mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical interrupts: */ + mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/ + mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC3SR, 0x00000000); /* clear all interrupts*/ + mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts*/ - mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic2er, 0x00000000); /* disable all interrupts*/ - mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/ - mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/ - mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC2ER, 0x00000000); /* disable all interrupts*/ + mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts*/ + mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/ + mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/ - mtdcr (uic1er, 0x00000000); /* disable all interrupts*/ - mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/ - mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/ - mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/ - mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/ + mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts*/ + mtdcr (UIC1ER, 0x00000000); /* disable all interrupts*/ + mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts*/ + mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/ + mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC1SR, 0x00000000); /* clear all interrupts*/ + mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts*/ - mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */ - mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/ - mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/ - mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ - mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/ - mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/ + mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted cascade to be checked */ + mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical interrupts*/ + mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/ + mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */ + mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC0SR, 0x00000000); /* clear all interrupts*/ + mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts*/ mfsdr(SDR0_MFR, mfr); mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index 7e84a61a9..5ebe69272 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -158,33 +158,33 @@ int board_early_init_f (void) | interrupts again. +-------------------------------------------------------------------*/ - mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic2er, 0x00000000); /* disable all interrupts */ - mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */ - mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */ - mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */ + mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */ + mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic1er, 0x00000000); /* disable all interrupts */ - mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */ - mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */ - mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */ + mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */ + mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */ + mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */ /* Except cascade UIC0 and UIC1 */ - mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */ - mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */ - mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */ + mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */ + mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ /* * Note: Some cores are still in reset when the chip starts, so diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 71ad89fa6..5f76672fb 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -49,23 +49,23 @@ int board_early_init_f(void) mtebc( PB2AP, 0x03800000 ); mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */ - mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */ - mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */ - mtdcr( uic1cr, 0x00000000 ); /* Set Critical / Non Critical interrupts */ - mtdcr( uic1pr, 0x7fff83ff ); /* Set Interrupt Polarities */ - mtdcr( uic1tr, 0x001f8000 ); /* Set Interrupt Trigger Levels */ - mtdcr( uic1vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ - mtdcr( uic1sr, 0x00000000 ); /* clear all interrupts */ - mtdcr( uic1sr, 0xffffffff ); + mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */ + mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */ + mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */ + mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */ + mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */ + mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ + mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */ + mtdcr( UIC1SR, 0xffffffff ); - mtdcr( uic0sr, 0xffffffff ); /* Clear all interrupts */ - mtdcr( uic0er, 0x00000000 ); /* disable all interrupts excepted cascade */ - mtdcr( uic0cr, 0x00000001 ); /* Set Critical / Non Critical interrupts */ - mtdcr( uic0pr, 0xffffffff ); /* Set Interrupt Polarities */ - mtdcr( uic0tr, 0x01000004 ); /* Set Interrupt Trigger Levels */ - mtdcr( uic0vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ - mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */ - mtdcr( uic0sr, 0xffffffff ); + mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */ + mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */ + mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */ + mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */ + mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */ + mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ + mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */ + mtdcr( UIC0SR, 0xffffffff ); mfsdr(SDR0_MFR, mfr); mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index 9fc0ec666..fb0e7b75e 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -159,33 +159,33 @@ int board_early_init_f (void) | interrupts again. +-------------------------------------------------------------------*/ - mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic2er, 0x00000000); /* disable all interrupts */ - mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */ - mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */ - mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */ + mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */ + mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic1er, 0x00000000); /* disable all interrupts */ - mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */ - mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */ - mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */ + mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */ + mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */ + mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */ /* Except cascade UIC0 and UIC1 */ - mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */ - mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */ - mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */ - mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ - mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */ + mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */ + mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ /* * Note: Some cores are still in reset when the chip starts, so diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index 5e32e8a78..d776edabc 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -159,36 +159,36 @@ int board_early_init_f (void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */ - mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ + mtdcr (UIC1ER, 0x00000000); /* disable all */ + mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */ + mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */ + mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ + mtdcr (UIC2ER, 0x00000000); /* disable all */ + mtdcr (UIC2CR, 0x00000000); /* all non-critical */ + mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ + mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ + mtdcr (UIC3ER, 0x00000000); /* disable all */ + mtdcr (UIC3CR, 0x00000000); /* all non-critical */ + mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); /* */ - mtdcr (uic0tr, 0x00000000); /* */ - mtdcr (uic0vr, 0x00000001); /* */ + mtdcr (UIC0SR, 0xfc000000); /* clear all */ + mtdcr (UIC0ER, 0x00000000); /* disable all */ + mtdcr (UIC0CR, 0x00000000); /* all non-critical */ + mtdcr (UIC0PR, 0xfc000000); /* */ + mtdcr (UIC0TR, 0x00000000); /* */ + mtdcr (UIC0VR, 0x00000001); /* */ mfsdr (SDR0_MFR, mfr); mfr &= ~SDR0_MFR_ECS_MASK; /* mtsdr(SDR0_MFR, mfr); */ @@ -241,11 +241,11 @@ long int fixed_sdram (void) /*-------------------------------------------------------------------- * Setup some default *------------------------------------------------------------------*/ - mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ /*-------------------------------------------------------------------- * Setup for board-specific specific mem @@ -253,20 +253,20 @@ long int fixed_sdram (void) /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ + mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ /* RA=10 RD=3 */ - mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ + mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ + mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ + mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ udelay (400); /* Delay 200 usecs (min) */ /*-------------------------------------------------------------------- * Enable the controller, then wait for DCEN to complete *------------------------------------------------------------------*/ - mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ + mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ for (;;) { - mfsdram (mem_mcsts, reg); + mfsdram (SDRAM0_MCSTS, reg); if (reg & 0x80000000) break; } diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c index 49078ebee..bc8cb0c44 100644 --- a/board/amcc/redwood/redwood.c +++ b/board/amcc/redwood/redwood.c @@ -416,41 +416,41 @@ static void early_init_UIC(void) * interrupt trigger levels. Make bit 0 High priority. Clear all * interrupts again. */ - mtdcr(uic3sr, 0xffffffff); /* Clear all interrupts */ - mtdcr(uic3er, 0x00000000); /* disable all interrupts */ - mtdcr(uic3cr, 0x00000000); /* Set Critical / Non Critical + mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */ + mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical * interrupts */ - mtdcr(uic3pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic3sr, 0xffffffff); /* clear all interrupts */ + mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */ - mtdcr(uic2sr, 0xffffffff); /* Clear all interrupts */ - mtdcr(uic2er, 0x00000000); /* disable all interrupts */ - mtdcr(uic2cr, 0x00000000); /* Set Critical / Non Critical + mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */ + mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical * interrupts */ - mtdcr(uic2pr, 0xebebebff); /* Set Interrupt Polarities */ - mtdcr(uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all interrupts */ + mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */ + mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */ - mtdcr(uic1sr, 0xffffffff); /* Clear all interrupts */ - mtdcr(uic1er, 0x00000000); /* disable all interrupts */ - mtdcr(uic1cr, 0x00000000); /* Set Critical / Non Critical + mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */ + mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical * interrupts */ - mtdcr(uic1pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(uic1tr, 0x001fc0ff); /* Set Interrupt Trigger Levels */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all interrupts */ + mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */ - mtdcr(uic0sr, 0xffffffff); /* Clear all interrupts */ - mtdcr(uic0er, 0x00000000); /* disable all interrupts excepted + mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted * cascade to be checked */ - mtdcr(uic0cr, 0x00104001); /* Set Critical / Non Critical + mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical * interrupts */ - mtdcr(uic0pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr(uic0tr, 0x000f003c); /* Set Interrupt Trigger Levels */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all interrupts */ + mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */ } diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 5913455ba..17f831c3f 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -52,29 +52,29 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ - mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ /* 50MHz tmrclk */ out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 4e5796ee8..be381d60a 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -40,13 +40,13 @@ int board_early_init_f(void) { lcd_init(); - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); - mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */ - mtdcr(uictr, 0x00000000); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); + mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */ + mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */ mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR); diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 086778a65..4a0573eb3 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -132,36 +132,36 @@ int board_early_init_f (void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */ - mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ + mtdcr (UIC1ER, 0x00000000); /* disable all */ + mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */ + mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */ + mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ + mtdcr (UIC2ER, 0x00000000); /* disable all */ + mtdcr (UIC2CR, 0x00000000); /* all non-critical */ + mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ + mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ + mtdcr (UIC3ER, 0x00000000); /* disable all */ + mtdcr (UIC3CR, 0x00000000); /* all non-critical */ + mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); /* */ - mtdcr (uic0tr, 0x00000000); /* */ - mtdcr (uic0vr, 0x00000001); /* */ + mtdcr (UIC0SR, 0xfc000000); /* clear all */ + mtdcr (UIC0ER, 0x00000000); /* disable all */ + mtdcr (UIC0CR, 0x00000000); /* all non-critical */ + mtdcr (UIC0PR, 0xfc000000); /* */ + mtdcr (UIC0TR, 0x00000000); /* */ + mtdcr (UIC0VR, 0x00000001); /* */ /* Enable two GPIO 10~11 and TraceA signal */ mfsdr(SDR0_PFC0,reg); diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index 28dcb66eb..4f299324c 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -47,13 +47,13 @@ int board_early_init_f(void) | +-------------------------------------------------------------------------*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */ - mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */ + mtdcr(UIC0PR, 0xFFFFFFE0); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* set UART1 control to select CTS/RTS */ #define FPGA_BRDC 0xF0300004 diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 2a654fa89..1ec13eb6b 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -82,21 +82,21 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ /*-------------------------------------------------------------------- * Setup other serial configuration @@ -237,7 +237,7 @@ void sdram_tr1_set(int ram_address, int* tr1_value) /* go through all possible SDRAM0_TR1[RDCT] values */ for (i=0; i<=0x1ff; i++) { /* set the current value for TR1 */ - mtsdram(mem_tr1, (0x80800800 | i)); + mtsdram(SDRAM0_TR1, (0x80800800 | i)); /* write values */ for (j=0; j<NUM_TRIES; j++) { @@ -289,15 +289,15 @@ phys_size_t initdram(int board) /*-------------------------------------------------------------------- * Setup some default *------------------------------------------------------------------*/ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_clktr, 0x40000000); /* ?? */ - mtsdram(mem_wddctr, 0x40000000); /* ?? */ + mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(SDRAM0_CLKTR, 0x40000000); /* ?? */ + mtsdram(SDRAM0_WDDCTR, 0x40000000); /* ?? */ /*clear this first, if the DDR is enabled by a debugger then you can not make changes. */ - mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */ + mtsdram(SDRAM0_CFG0, 0x00000000); /* Disable EEC */ /*-------------------------------------------------------------------- * Setup for board-specific specific mem @@ -305,29 +305,29 @@ phys_size_t initdram(int board) /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ + mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram(SDRAM0_B1CR, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ - mtsdram(mem_tr0, 0x410a4012); /* ?? */ - mtsdram(mem_rtr, 0x04080000); /* ?? */ - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ - mtsdram(mem_cfg0, 0x30000000); /* Disable EEC */ + mtsdram(SDRAM0_TR0, 0x410a4012); /* ?? */ + mtsdram(SDRAM0_RTR, 0x04080000); /* ?? */ + mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ + mtsdram(SDRAM0_CFG0, 0x30000000); /* Disable EEC */ udelay(400); /* Delay 200 usecs (min) */ /*-------------------------------------------------------------------- * Enable the controller, then wait for DCEN to complete *------------------------------------------------------------------*/ - mtsdram(mem_cfg0, 0x80000000); /* Enable */ + mtsdram(SDRAM0_CFG0, 0x80000000); /* Enable */ for (;;) { - mfsdram(mem_mcsts, reg); + mfsdram(SDRAM0_MCSTS, reg); if (reg & 0x80000000) break; } sdram_tr1_set(0x00000000, &tr1_bank1); sdram_tr1_set(0x08000000, &tr1_bank2); - mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800)); + mtsdram(SDRAM0_TR1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800)); return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */ } diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 245004cee..033bdd20f 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -485,50 +485,50 @@ int board_early_init_f (void) | interrupt trigger levels. Make bit 0 High priority. Clear all | interrupts again. +-------------------------------------------------------------------*/ - mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic3er, 0x00000000); /* disable all interrupts */ - mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical + mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical * interrupts */ - mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ - mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest + mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest * priority */ - mtdcr (uic3sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC3SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic2er, 0x00000000); /* disable all interrupts */ - mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical + mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical * interrupts */ - mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */ - mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ - mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest + mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities */ + mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest * priority */ - mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic1er, 0x00000000); /* disable all interrupts */ - mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical + mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */ + mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical * interrupts */ - mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */ - mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest + mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels */ + mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest * priority */ - mtdcr (uic1sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */ - mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ - mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted + mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted * cascade to be checked */ - mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical + mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical * interrupts */ - mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */ - mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ - mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest + mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */ + mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest * priority */ - mtdcr (uic0sr, 0x00000000); /* clear all interrupts */ - mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */ + mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */ + mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */ mfsdr(SDR0_MFR, mfr); mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c index 5d1c4170d..1656e8ac0 100644 --- a/board/cray/L1/L1.c +++ b/board/cray/L1/L1.c @@ -113,13 +113,13 @@ int board_early_init_f (void) { /* Running from ROM: global data is still READONLY */ init_sdram (); - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */ - mtdcr (uicpr, 0xFFFFFFE0); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFFE0); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } @@ -198,7 +198,7 @@ static void init_sdram (void) unsigned long tmp; /* write SDRAM bank 0 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); mtdcr (SDRAM0_CFGDATA, 0x00062001); /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */ @@ -212,25 +212,25 @@ static void init_sdram (void) /* divisor = ((mfdcr(strap)>> 28) & 0x3); */ /* write SDRAM timing for 100MHz. */ - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); mtdcr (SDRAM0_CFGDATA, 0x0086400D); /* write SDRAM refresh interval register */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); mtdcr (SDRAM0_CFGDATA, 0x05F00000); udelay (200); /* sdram controller.*/ - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, 0x90800000); udelay (200); /* initially, disable ECC on all banks */ udelay (200); - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); tmp = mfdcr (SDRAM0_CFGDATA); tmp &= 0xff0fffff; - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); mtdcr (SDRAM0_CFGDATA, tmp); return; @@ -282,15 +282,15 @@ int testdram (void) } printf ("Enable ECC.."); - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000; - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, tmp); udelay (600); for (p = (unsigned long) 0; ((unsigned long) p < L1_MEMSIZE); *p++ = 0L) ; udelay (400); - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); tmp = mfdcr (SDRAM0_CFGDATA); tmp |= 0x00800000; mtdcr (SDRAM0_CFGDATA, tmp); diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c index cb24cd4ff..d6d65cf45 100644 --- a/board/csb272/csb272.c +++ b/board/csb272/csb272.c @@ -87,13 +87,13 @@ int board_early_init_f(void) | +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF83); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */ @@ -135,28 +135,28 @@ phys_size_t initdram (int board_type) tot_size = 0; - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); diff --git a/board/csb272/init.S b/board/csb272/init.S index 15b26f8bf..a6b0d4045 100644 --- a/board/csb272/init.S +++ b/board/csb272/init.S @@ -175,26 +175,26 @@ sdram_init: * Disable memory controller to allow * values to be changed. */ - WDCR_SDRAM(mem_mcopt1, 0x00000000) + WDCR_SDRAM(SDRAM0_CFG, 0x00000000) /* * Configure Memory Banks */ - WDCR_SDRAM(mem_mb0cf, 0x00084001) - WDCR_SDRAM(mem_mb1cf, 0x00000000) - WDCR_SDRAM(mem_mb2cf, 0x00000000) - WDCR_SDRAM(mem_mb3cf, 0x00000000) + WDCR_SDRAM(SDRAM0_B0CR, 0x00084001) + WDCR_SDRAM(SDRAM0_B1CR, 0x00000000) + WDCR_SDRAM(SDRAM0_B2CR, 0x00000000) + WDCR_SDRAM(SDRAM0_B3CR, 0x00000000) /* * Set up SDTR1 (SDRAM Timing Register) */ - WDCR_SDRAM(mem_sdtr1, 0x00854009) + WDCR_SDRAM(SDRAM0_TR, 0x00854009) /* * Set RTR (Refresh Timing Register) */ - WDCR_SDRAM(mem_rtr, 0x10000000) - /* WDCR_SDRAM(mem_rtr, 0x05f00000) */ + WDCR_SDRAM(SDRAM0_RTR, 0x10000000) + /* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */ /******************************************************************** * Delay to ensure 200usec have elapsed since reset. Assume worst @@ -210,7 +210,7 @@ sdram_init: /******************************************************************** * Set memory controller options reg, MCOPT1. *******************************************************************/ - WDCR_SDRAM(mem_mcopt1,0x80800000) + WDCR_SDRAM(SDRAM0_CFG,0x80800000) ..sdri_done: blr /* Return to calling function */ diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c index fa0fa193e..20d34adfd 100644 --- a/board/csb472/csb472.c +++ b/board/csb472/csb472.c @@ -55,13 +55,13 @@ int board_early_init_f(void) | +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF83); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */ @@ -103,28 +103,28 @@ phys_size_t initdram (int board_type) tot_size = 0; - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); diff --git a/board/csb472/init.S b/board/csb472/init.S index 105cb71be..b31bd0455 100644 --- a/board/csb472/init.S +++ b/board/csb472/init.S @@ -171,26 +171,26 @@ sdram_init: * Disable memory controller to allow * values to be changed. */ - WDCR_SDRAM(mem_mcopt1, 0x00000000) + WDCR_SDRAM(SDRAM0_CFG, 0x00000000) /* * Configure Memory Banks */ - WDCR_SDRAM(mem_mb0cf, 0x00062001) - WDCR_SDRAM(mem_mb1cf, 0x00000000) - WDCR_SDRAM(mem_mb2cf, 0x00000000) - WDCR_SDRAM(mem_mb3cf, 0x00000000) + WDCR_SDRAM(SDRAM0_B0CR, 0x00062001) + WDCR_SDRAM(SDRAM0_B1CR, 0x00000000) + WDCR_SDRAM(SDRAM0_B2CR, 0x00000000) + WDCR_SDRAM(SDRAM0_B3CR, 0x00000000) /* * Set up SDTR1 (SDRAM Timing Register) */ - WDCR_SDRAM(mem_sdtr1, 0x00854009) + WDCR_SDRAM(SDRAM0_TR, 0x00854009) /* * Set RTR (Refresh Timing Register) */ - WDCR_SDRAM(mem_rtr, 0x10000000) - /* WDCR_SDRAM(mem_rtr, 0x05f00000) */ + WDCR_SDRAM(SDRAM0_RTR, 0x10000000) + /* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */ /******************************************************************** * Delay to ensure 200usec have elapsed since reset. Assume worst @@ -206,7 +206,7 @@ sdram_init: /******************************************************************** * Set memory controller options reg, MCOPT1. *******************************************************************/ - WDCR_SDRAM(mem_mcopt1,0x80800000) + WDCR_SDRAM(SDRAM0_CFG,0x80800000) ..sdri_done: blr /* Return to calling function */ diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index 56751e159..06de6e0b1 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -53,13 +53,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) * IRQ 31 (EXT IRQ 6) */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/eric/eric.c b/board/eric/eric.c index bc2a907f6..cfcfa525a 100644 --- a/board/eric/eric.c +++ b/board/eric/eric.c @@ -62,13 +62,13 @@ int board_early_init_f (void) | +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all SMI to be non-critical */ - mtdcr (uicpr, 0xFFFFFF88); /* set int polarities; IRQ3 to 1 */ - mtdcr (uictr, 0x10000000); /* set int trigger levels, UART0 is EDGE */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all SMI to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF88); /* set int polarities; IRQ3 to 1 */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels, UART0 is EDGE */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ mtdcr (CPC0_CR0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */ diff --git a/board/eric/init.S b/board/eric/init.S index 16ab11eae..c18663a75 100644 --- a/board/eric/init.S +++ b/board/eric/init.S @@ -228,7 +228,7 @@ sdram_init: /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */ /*------------------------------------------------------------------- */ - addi r4,0,mem_mb0cf + addi r4,0,SDRAM0_B0CR mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB0CF@h ori r4,r4,MB0CF@l @@ -238,7 +238,7 @@ sdram_init: /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */ /*------------------------------------------------------------------- */ - addi r4,0,mem_mb1cf + addi r4,0,SDRAM0_B1CR mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB1CF@h ori r4,r4,MB1CF@l @@ -248,7 +248,7 @@ sdram_init: /* Set MB2CF for bank 2. off */ /*------------------------------------------------------------------- */ - addi r4,0,mem_mb2cf + addi r4,0,SDRAM0_B2CR mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB2CF@h ori r4,r4,MB2CF@l @@ -258,7 +258,7 @@ sdram_init: /* Set MB3CF for bank 3. off */ /*------------------------------------------------------------------- */ - addi r4,0,mem_mb3cf + addi r4,0,SDRAM0_B3CR mtdcr SDRAM0_CFGADDR,r4 addis r4,0,MB3CF@h ori r4,r4,MB3CF@l @@ -305,14 +305,14 @@ sdram_init: /*------------------------------------------------------------------- */ /* Set SDTR1 */ /*------------------------------------------------------------------- */ - addi r4,0,mem_sdtr1 + addi r4,0,SDRAM0_TR mtdcr SDRAM0_CFGADDR,r4 mtdcr SDRAM0_CFGDATA,r6 /*------------------------------------------------------------------- */ /* Set RTR */ /*------------------------------------------------------------------- */ - addi r4,0,mem_rtr + addi r4,0,SDRAM0_RTR mtdcr SDRAM0_CFGADDR,r4 mtdcr SDRAM0_CFGDATA,r7 @@ -332,7 +332,7 @@ sdram_init: /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */ /* read/prefetch. */ /*------------------------------------------------------------------- */ - addi r4,0,mem_mcopt1 + addi r4,0,SDRAM0_CFG mtdcr SDRAM0_CFGADDR,r4 addis r4,0,0x8080 /* set DC_EN=1 */ ori r4,r4,0x0000 diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c index 46622a29f..409a0540b 100644 --- a/board/esd/apc405/apc405.c +++ b/board/esd/apc405/apc405.c @@ -155,13 +155,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0 */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0 */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 9d1b6d264..a632cb42d 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -130,13 +130,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */ diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 8da08facf..5f0e67cbb 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -66,13 +66,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF9F); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c index 418d3e237..5a3f61de3 100644 --- a/board/esd/canbt/canbt.c +++ b/board/esd/canbt/canbt.c @@ -134,13 +134,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 7a9240189..391fbf4c1 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -45,13 +45,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index 00c7024a8..6d9814f16 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -58,14 +58,14 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) unused */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 4c9ed2fa5..c29c876d6 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -179,22 +179,22 @@ int board_early_init_f(void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ #if defined(CONFIG_CPCI405_6U) if (cpci405_version() == 3) { - mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ + mtdcr(UIC0PR, 0xFFFFFF99); /* set int polarities */ } else { - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ } #else - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ #endif - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0, + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, * INT0 highest priority */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } diff --git a/board/esd/cpciiser4/cpciiser4.c b/board/esd/cpciiser4/cpciiser4.c index 6e97392c4..ee90e2c28 100644 --- a/board/esd/cpciiser4/cpciiser4.c +++ b/board/esd/cpciiser4/cpciiser4.c @@ -129,14 +129,14 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - /* mtdcr(uicpr, 0xFFFFFF81); / set int polarities */ - mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + /* mtdcr(UIC0PR, 0xFFFFFF81); / set int polarities */ + mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c index fc0d091bc..228a57057 100644 --- a/board/esd/dp405/dp405.c +++ b/board/esd/dp405/dp405.c @@ -43,13 +43,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c index 28a50c7b0..f475d1107 100644 --- a/board/esd/du405/du405.c +++ b/board/esd/du405/du405.c @@ -124,13 +124,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) unused; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFFB1); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFFB1); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 100 us diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 376de9835..056f455d6 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -87,37 +87,37 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ - mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ /* * UIC1: * bit30: ext. Irq 1: PLD : int 32+30 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xfffffffd); - mtdcr(uic1tr, 0x00000000); - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xfffffffd); + mtdcr(UIC1TR, 0x00000000); + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ /* * UIC2 * bit3: ext. Irq 2: DCF77 : int 64+3 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ /* select Ethernet pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index b72b716dd..132531b39 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -363,13 +363,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index acb23dad1..2a2c4343c 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -86,13 +86,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF9F); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c index 709bcdd98..ab909e503 100644 --- a/board/esd/ocrtc/ocrtc.c +++ b/board/esd/ocrtc/ocrtc.c @@ -45,13 +45,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: clear EBTC -> high-Z ebc signals between diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 04bc569ea..34a163240 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -155,13 +155,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) FPGA Timestamp; active low; level sensitive * IRQ 31 (EXT IRQ 6) PCI Reset; active low; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * Setup GPIO pins (IRQ4/GPIO21 as GPIO) @@ -271,7 +271,7 @@ int misc_init_r (void) pci_write_config_dword(PCIDEVID_405GP, i, *ptr++); } } - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ *magic = 0; /* clear pci reconfig magic again */ } diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index a3c1cec6e..f14ef7a20 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -78,13 +78,13 @@ int board_early_init_f(void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF99); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index 5ff87e7a2..e7415e44c 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -48,13 +48,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest priority */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c index 419311aec..3725ece39 100644 --- a/board/esd/pmc405de/pmc405de.c +++ b/board/esd/pmc405de/pmc405de.c @@ -114,13 +114,13 @@ int board_early_init_f(void) * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest prio */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest prio */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 119cbf262..f0f9bff3e 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -148,29 +148,29 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffff7ef); - mtdcr(uic0tr, 0x00000000); - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffff7ef); + mtdcr(UIC0TR, 0x00000000); + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffc7f5); - mtdcr(uic1tr, 0x00000000); - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffc7f5); + mtdcr(UIC1TR, 0x00000000); + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0x27ffffff); - mtdcr(uic2tr, 0x00000000); - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0x27ffffff); + mtdcr(UIC2TR, 0x00000000); + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ /* select Ethernet pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 7477f56b2..3f81665eb 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -88,13 +88,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFFB5); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFFB5); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c index de9c7b974..fb4802265 100644 --- a/board/esd/vom405/vom405.c +++ b/board/esd/vom405/vom405.c @@ -45,13 +45,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index e86f1d0ab..f2591d57f 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -64,13 +64,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF9F); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/exbitgen/exbitgen.c b/board/exbitgen/exbitgen.c index 0f8412776..50d9748c7 100644 --- a/board/exbitgen/exbitgen.c +++ b/board/exbitgen/exbitgen.c @@ -37,13 +37,13 @@ int board_early_init_f (void) | +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */ - mtdcr (uicpr, 0xFFFFFF90); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF90); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* Perform reset of PHY connected to PPC via register in CPLD */ out8 (PHY_CTRL_ADDR, 0x2e); /* activate nRESET,FDX,F100,ANEN, enable output */ @@ -94,28 +94,28 @@ phys_size_t initdram (int board_type) tot_size = 0; - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); tot_size += bank_size; } - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); tmp = mfdcr (SDRAM0_CFGDATA); if (tmp & 0x00000001) { bank_size = 0x00400000 << ((tmp >> 17) & 0x7); diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S index c2dae560f..7a9726fe7 100644 --- a/board/exbitgen/init.S +++ b/board/exbitgen/init.S @@ -382,7 +382,7 @@ sdram_init: /*----------------------------------------------------------- */ /* Set SDTR1 */ /*----------------------------------------------------------- */ - addi r5,0,mem_sdtr1 + addi r5,0,SDRAM0_TR mtdcr SDRAM0_CFGADDR,r5 mtdcr SDRAM0_CFGDATA,r4 @@ -413,7 +413,7 @@ sdram_init: /* Set SDRAM bank 0 register and adjust r6 for next bank */ /*------------------------------------------------------ */ - addi r7,0,mem_mb0cf + addi r7,0,SDRAM0_B0CR mtdcr SDRAM0_CFGADDR,r7 mtdcr SDRAM0_CFGDATA,r6 @@ -424,7 +424,7 @@ sdram_init: cmpi 0, r12, 2 bne b1skip - addi r7,0,mem_mb1cf + addi r7,0,SDRAM0_B1CR mtdcr SDRAM0_CFGADDR,r7 mtdcr SDRAM0_CFGDATA,r6 @@ -432,7 +432,7 @@ sdram_init: /* Set SDRAM bank 2 register and adjust r6 for next bank */ /*------------------------------------------------------ */ -b1skip: addi r7,0,mem_mb2cf +b1skip: addi r7,0,SDRAM0_B2CR mtdcr SDRAM0_CFGADDR,r7 mtdcr SDRAM0_CFGDATA,r6 @@ -443,7 +443,7 @@ b1skip: addi r7,0,mem_mb2cf cmpi 0, r12, 2 bne b3skip - addi r7,0,mem_mb3cf + addi r7,0,SDRAM0_B3CR mtdcr SDRAM0_CFGADDR,r7 mtdcr SDRAM0_CFGDATA,r6 b3skip: @@ -456,7 +456,7 @@ b3skip: addis r7, 0, 0x05F0 /* RTR value for 100Mhz */ bl rtr_2 rtr_1: addis r7, 0, 0x03F8 -rtr_2: addi r4,0,mem_rtr +rtr_2: addi r4,0,SDRAM0_RTR mtdcr SDRAM0_CFGADDR,r4 mtdcr SDRAM0_CFGDATA,r7 @@ -476,7 +476,7 @@ rtr_2: addi r4,0,mem_rtr /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */ /* read/prefetch. */ /*----------------------------------------------------------- */ - addi r4,0,mem_mcopt1 + addi r4,0,SDRAM0_CFG mtdcr SDRAM0_CFGADDR,r4 addis r4,0,0x80C0 /* set DC_EN=1 */ ori r4,r4,0x0000 diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index dc4dbd3c3..d4ba043b2 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -21,12 +21,16 @@ #endif #include <spd_sdram.h> #include <asm/mmu.h> +#include <asm/io.h> #if defined(CONFIG_OF_LIBFDT) #include <libfdt.h> #endif +#include <hwconfig.h> +#include <fdt_support.h> #if defined(CONFIG_PQ_MDS_PIB) #include "../common/pq-mds-pib.h" #endif +#include "../../../drivers/qe/uec.h" const qe_iop_conf_t qe_iop_conf_tab[] = { /* GETH1 */ @@ -89,11 +93,19 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ }; -int board_early_init_f(void) +/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */ +static int board_handle_erratum2(void) { + const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR; + return REVID_MAJOR(immr->sysconf.spridr) == 2 && + REVID_MINOR(immr->sysconf.spridr) == 1; +} + +int board_early_init_f(void) +{ const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR; /* Enable flash write */ bcsr[0xa] &= ~0x04; @@ -105,6 +117,21 @@ int board_early_init_f(void) /* Enable second UART */ bcsr[0x9] &= ~0x01; + if (board_handle_erratum2()) { + void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8); + + /* + * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) + * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) + */ + setbits_be32(immap, 0x0c003000); + + /* + * IMMR + 0x14AC[20:27] = 10101010 + * (data delay for both UCC's) + */ + clrsetbits_be32(immap + 4, 0xff0, 0xaa0); + } return 0; } @@ -116,6 +143,28 @@ int board_early_init_r(void) return 0; } +#ifdef CONFIG_UEC_ETH +static uec_info_t uec_info[] = { +#ifdef CONFIG_UEC_ETH1 + STD_UEC_INFO(1), +#endif +#ifdef CONFIG_UEC_ETH2 + STD_UEC_INFO(2), +#endif +}; + +int board_eth_init(bd_t *bd) +{ + if (board_handle_erratum2()) { + int i; + + for (i = 0; i < ARRAY_SIZE(uec_info); i++) + uec_info[i].enet_interface = ENET_1000_RGMII_RXID; + } + return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info)); +} +#endif /* CONFIG_UEC_ETH */ + #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif @@ -126,6 +175,7 @@ phys_size_t initdram(int board_type) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; u32 msize = 0; + u32 lbc_sdram_size; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; @@ -147,7 +197,9 @@ phys_size_t initdram(int board_type) /* * Initialize SDRAM if it is on local bus. */ - msize += sdram_init(msize * 1024 * 1024); + lbc_sdram_size = sdram_init(msize * 1024 * 1024); + if (!msize) + msize = lbc_sdram_size; /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); @@ -307,21 +359,28 @@ static int sdram_init(unsigned int base) { return 0; } #endif #if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) +static void ft_board_fixup_qe_usb(void *blob, bd_t *bd) { - const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) + return; + + do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode", + "peripheral", sizeof("peripheral"), 1); +} +void ft_board_setup(void *blob, bd_t *bd) +{ ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + ft_board_fixup_qe_usb(blob, bd); /* * mpc8360ea pb mds errata 2: RGMII timing * if on mpc8360ea rev. 2.1, * change both ucc phy-connection-types from rgmii-id to rgmii-rxid */ - if ((REVID_MAJOR(immr->sysconf.spridr) == 2) && - (REVID_MINOR(immr->sysconf.spridr) == 1)) { + if (board_handle_erratum2()) { int nodeoffset; const char *prop; int path; diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index ae258e1f2..03cd6b884 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -38,20 +38,20 @@ int board_early_init_f (void) { #if 0 /* test-only */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000010); - mtdcr (uicpr, 0xFFFF7FF0); /* set int polarities */ - mtdcr (uictr, 0x00000010); /* set int trigger levels */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000010); + mtdcr (UIC0PR, 0xFFFF7FF0); /* set int polarities */ + mtdcr (UIC0TR, 0x00000010); /* set int trigger levels */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ #else - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFFF0); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFFF0); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ #endif #if 1 /* test-only */ @@ -114,18 +114,17 @@ int checkboard (void) long int init_sdram_static_settings(void) { -#define mtsdram0(reg, data) mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data) /* disable memcontroller so updates work */ - mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL ); - mtsdram0( mem_rtr , MEM_RTR_INIT_VAL ); - mtsdram0( mem_pmit , MEM_PMIT_INIT_VAL ); - mtsdram0( mem_mb0cf , MEM_MB0CF_INIT_VAL ); - mtsdram0( mem_mb1cf , MEM_MB1CF_INIT_VAL ); - mtsdram0( mem_sdtr1 , MEM_SDTR1_INIT_VAL ); + mtsdram(SDRAM0_CFG, MEM_MCOPT1_INIT_VAL); + mtsdram(SDRAM0_RTR, MEM_RTR_INIT_VAL); + mtsdram(SDRAM0_PMIT, MEM_PMIT_INIT_VAL); + mtsdram(SDRAM0_B0CR, MEM_MB0CF_INIT_VAL); + mtsdram(SDRAM0_B1CR, MEM_MB1CF_INIT_VAL); + mtsdram(SDRAM0_TR, MEM_SDTR1_INIT_VAL); /* SDRAM have a power on delay, 500 micro should do */ udelay(500); - mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE ); + mtsdram(SDRAM0_CFG, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE); return (CONFIG_SYS_SDRAM_SIZE); /* CONFIG_SYS_SDRAM_SIZE is in G2000.h */ } diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c index 5246bc8c4..ff5f18323 100644 --- a/board/gdsys/dlvision/dlvision.c +++ b/board/gdsys/dlvision/dlvision.c @@ -36,13 +36,13 @@ enum { int board_early_init_f(void) { - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index 27c159bec..7cc1bf267 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -83,21 +83,21 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ /* * Setup other serial configuration diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index 0de1be857..2cd2e6d45 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -44,37 +44,37 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(uic3sr, 0xffffffff); /* clear all */ - mtdcr(uic3er, 0x00000000); /* disable all */ - mtdcr(uic3cr, 0x00000000); /* all non-critical */ - mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic3tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic3sr, 0xffffffff); /* clear all */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ + mtdcr(UIC3ER, 0x00000000); /* disable all */ + mtdcr(UIC3CR, 0x00000000); /* all non-critical */ + mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ /* * Configure PFC (Pin Function Control) registers diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c index 628ce3dc9..a56c2cc98 100644 --- a/board/gdsys/neo/neo.c +++ b/board/gdsys/neo/neo.c @@ -31,13 +31,13 @@ int board_early_init_f(void) { - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks diff --git a/board/jse/jse.c b/board/jse/jse.c index 6dc9a01af..1849ca47d 100644 --- a/board/jse/jse.c +++ b/board/jse/jse.c @@ -48,12 +48,12 @@ int board_early_init_f (void) | IRQ 30 (EXT IRQ 5) SystemACE BRdy (unused) | IRQ 31 (EXT IRQ 6) (unused) +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF87); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* Configure the interface to the SystemACE MCU port. The SystemACE is fast, but there is no reason to have diff --git a/board/jse/sdram.c b/board/jse/sdram.c index bb6f85eee..88fdd8413 100644 --- a/board/jse/sdram.c +++ b/board/jse/sdram.c @@ -35,59 +35,59 @@ phys_size_t initdram (int board_type) /* Configure the SDRAMS */ /* disable memory controller */ - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, 0x00000000); udelay (500); /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ - mtdcr (SDRAM0_CFGADDR, mem_besra); + mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR0); mtdcr (SDRAM0_CFGDATA, 0xffffffff); /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ - mtdcr (SDRAM0_CFGADDR, mem_besrb); + mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR1); mtdcr (SDRAM0_CFGDATA, 0xffffffff); /* Clear SDRAM0_ECCCFG (disable ECC) */ - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); mtdcr (SDRAM0_CFGDATA, 0x00000000); /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ - mtdcr (SDRAM0_CFGADDR, mem_eccerr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCESR); mtdcr (SDRAM0_CFGDATA, 0xffffffff); /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */ - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); mtdcr (SDRAM0_CFGDATA, 0x010a4016); /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); mtdcr (SDRAM0_CFGDATA, 0x00084001); /* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */ - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); mtdcr (SDRAM0_CFGDATA, 0x04084001); /* Memory Bank 2 Config == BE=0 */ - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); mtdcr (SDRAM0_CFGDATA, 0x00000000); /* Memory Bank 3 Config == BE=0 */ - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); mtdcr (SDRAM0_CFGDATA, 0x00000000); /* refresh timer = 0x400 */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); mtdcr (SDRAM0_CFGDATA, 0x04000000); /* Power management idle timer set to the default. */ - mtdcr (SDRAM0_CFGADDR, mem_pmit); + mtdcr (SDRAM0_CFGADDR, SDRAM0_PMIT); mtdcr (SDRAM0_CFGDATA, 0x07c00000); udelay (500); /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */ - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, 0x80e00000); return SDRAM_LEN; @@ -108,7 +108,7 @@ int testdram (void) #ifdef DEBUG printf ("SDRAM Controller Registers --\n"); - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_CFG : 0x%08x\n", val); @@ -116,19 +116,19 @@ int testdram (void) val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_STATUS: 0x%08x\n", val); - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_B0CR : 0x%08x\n", val); - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_B1CR : 0x%08x\n", val); - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_TR : 0x%08x\n", val); - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); val = mfdcr (SDRAM0_CFGDATA); printf (" SDRAM0_RTR : 0x%08x\n", val); #endif diff --git a/board/korat/korat.c b/board/korat/korat.c index 3d4d149f6..40a097cef 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -87,29 +87,29 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ - mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ /* * Take sim card reader and CF controller out of reset. Also enable PHY diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index a9c2a6f44..f4090f40d 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -44,29 +44,29 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all. if write with 1 then the status is cleared */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000000); /* we have not critical interrupts at the moment */ - mtdcr(uic0pr, 0xFFBFF1EF); /* Adjustment of the polarity */ - mtdcr(uic0tr, 0x00000900); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */ + mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */ + mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xFFFFC6A5); /* Adjustment of the polarity */ - mtdcr(uic1tr, 0x60000040); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */ + mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0x27C00000); /* Adjustment of the polarity */ - mtdcr(uic2tr, 0x3C000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */ + mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ /* Trace Pins are disabled. SDR0_PFC0 Register */ mtsdr(SDR0_PFC0, 0x0); diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index d8279e81c..ae8eade64 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -348,7 +348,7 @@ int init_sdram (void) /* trc_clocks is sum of trp_clocks + tras_clocks */ trc_clocks = trp_clocks + tras_clocks; /* get SDRAM timing register */ - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); sdram_tim = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F; /* insert CASL value */ sdram_tim |= ((unsigned long) (cal_val)) << 23; @@ -369,7 +369,7 @@ int init_sdram (void) /* insert SZ value; */ tmp |= ((unsigned long) sdram_table[i].sz << 17); /* get SDRAM bank 0 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); sdram_bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; sdram_bank |= (baseaddr | tmp | 0x01); @@ -380,7 +380,7 @@ int init_sdram (void) #endif /* write SDRAM timing register */ - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); mtdcr (SDRAM0_CFGDATA, sdram_tim); #ifdef SDRAM_DEBUG @@ -390,22 +390,22 @@ int init_sdram (void) #endif /* write SDRAM bank 0 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); mtdcr (SDRAM0_CFGDATA, sdram_bank); if (get_bus_freq (tmp) > 110000000) { /* > 110MHz */ /* get SDRAM refresh interval register */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000; tmp |= 0x07F00000; } else { /* get SDRAM refresh interval register */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000; tmp |= 0x05F00000; } /* write SDRAM refresh interval register */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); mtdcr (SDRAM0_CFGDATA, tmp); /* enable ECC if used */ #if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI) @@ -415,18 +415,18 @@ int init_sdram (void) #ifdef SDRAM_DEBUG serial_puts ("disable ECC.. "); #endif - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); tmp = mfdcr (SDRAM0_CFGDATA); tmp &= 0xff0fffff; /* disable all banks */ - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); /* set up SDRAM Controller with ECC enabled */ #ifdef SDRAM_DEBUG serial_puts ("setup SDRAM Controller.. "); #endif mtdcr (SDRAM0_CFGDATA, tmp); - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000; - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, tmp); udelay (600); #ifdef SDRAM_DEBUG @@ -447,7 +447,7 @@ int init_sdram (void) serial_puts ("enable ECC\n"); #endif udelay (400); - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); tmp = mfdcr (SDRAM0_CFGDATA); tmp |= 0x00800000; /* enable bank 0 */ mtdcr (SDRAM0_CFGDATA, tmp); @@ -456,9 +456,9 @@ int init_sdram (void) #endif { /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */ - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80C00000; - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, tmp); udelay (400); } @@ -489,13 +489,13 @@ int board_early_init_f (void) | caused the interrupt. | +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */ - mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical (for now) */ + mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } @@ -631,13 +631,13 @@ phys_size_t initdram (int board_type) ds = 0; /* since the DRAM controller is allready set up, calculate the size with the bank registers */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); bank_reg[0] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); bank_reg[1] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); bank_reg[2] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); bank_reg[3] = mfdcr (SDRAM0_CFGDATA); TotalSize = 0; for (i = 0; i < 4; i++) { @@ -648,7 +648,7 @@ phys_size_t initdram (int board_type) } else ds = 1; } - mtdcr (SDRAM0_CFGADDR, mem_ecccf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); tmp = mfdcr (SDRAM0_CFGDATA); if (!tmp) diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index e00d1d08f..792eccc15 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -361,7 +361,7 @@ int board_early_init_f (void) SDRAM_err ("unsupported SDRAM"); /* get SDRAM timing register */ - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); tmp = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F; /* insert CASL value */ /* tmp |= ((unsigned long)cal_val) << 23; */ @@ -385,7 +385,7 @@ int board_early_init_f (void) #endif /* write SDRAM timing register */ - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); mtdcr (SDRAM0_CFGDATA, tmp); baseaddr = CONFIG_SYS_SDRAM_BASE; bank_size = (((unsigned long) density) << 22) / 2; @@ -418,7 +418,7 @@ int board_early_init_f (void) SDRAM_err ("unsupported SDRAM"); } /* endswitch */ /* get SDRAM bank 0 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; bank |= (baseaddr | tmp | 0x01); #ifdef SDRAM_DEBUG @@ -434,11 +434,11 @@ int board_early_init_f (void) sdram_size += bank_size; /* write SDRAM bank 0 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM bank 1 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; sdram_size = 0; @@ -459,11 +459,11 @@ int board_early_init_f (void) serial_puts ("\n"); #endif /* write SDRAM bank 1 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM bank 2 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; bank |= (baseaddr | tmp | 0x01); @@ -482,11 +482,11 @@ int board_early_init_f (void) sdram_size += bank_size; /* write SDRAM bank 2 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM bank 3 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001; #ifdef SDRAM_DEBUG @@ -509,12 +509,12 @@ int board_early_init_f (void) #endif /* write SDRAM bank 3 register */ - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); mtdcr (SDRAM0_CFGDATA, bank); /* get SDRAM refresh interval register */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000; if (tmemclk < NSto10PS (16)) @@ -523,13 +523,13 @@ int board_early_init_f (void) tmp |= 0x03F80000; /* write SDRAM refresh interval register */ - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); mtdcr (SDRAM0_CFGDATA, tmp); /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */ - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80E00000; - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); mtdcr (SDRAM0_CFGDATA, tmp); @@ -552,13 +552,13 @@ int board_early_init_f (void) | caused the interrupt. | +-------------------------------------------------------------------------*/ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */ - mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical (for now) */ + mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ return 0; } @@ -619,13 +619,13 @@ phys_size_t initdram (int board_type) /* since the DRAM controller is allready set up, * calculate the size with the bank registers */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); bank_reg[0] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); bank_reg[1] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); bank_reg[2] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); bank_reg[3] = mfdcr (SDRAM0_CFGDATA); TotalSize = 0; for (i = 0; i < 4; i++) { diff --git a/board/netstal/common/fixed_sdram.c b/board/netstal/common/fixed_sdram.c index f7baed6e9..2f21fbb4e 100644 --- a/board/netstal/common/fixed_sdram.c +++ b/board/netstal/common/fixed_sdram.c @@ -29,17 +29,17 @@ void show_sdram_registers(void) u32 value; printf("SDRAM Controller Registers --\n"); - mfsdram(mem_mcopt1, value); + mfsdram(SDRAM0_CFG, value); printf(" SDRAM0_CFG : 0x%08x\n", value); - mfsdram(mem_status, value); + mfsdram(SDRAM0_STATUS, value); printf(" SDRAM0_STATUS: 0x%08x\n", value); - mfsdram(mem_mb0cf, value); + mfsdram(SDRAM0_B0CR, value); printf(" SDRAM0_B0CR : 0x%08x\n", value); - mfsdram(mem_mb1cf, value); + mfsdram(SDRAM0_B1CR, value); printf(" SDRAM0_B1CR : 0x%08x\n", value); - mfsdram(mem_sdtr1, value); + mfsdram(SDRAM0_TR, value); printf(" SDRAM0_TR : 0x%08x\n", value); - mfsdram(mem_rtr, value); + mfsdram(SDRAM0_RTR, value); printf(" SDRAM0_RTR : 0x%08x\n", value); } #endif @@ -50,53 +50,53 @@ long int init_ppc405_sdram(unsigned int dram_size) printf(__FUNCTION__); #endif /* disable memory controller */ - mtsdram(mem_mcopt1, 0x00000000); + mtsdram(SDRAM0_CFG, 0x00000000); udelay (500); /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ - mtsdram(mem_besra, 0xffffffff); + mtsdram(SDRAM0_BESR0, 0xffffffff); /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ - mtsdram(mem_besrb, 0xffffffff); + mtsdram(SDRAM0_BESR1, 0xffffffff); /* Clear SDRAM0_ECCCFG (disable ECC) */ - mtsdram(mem_ecccf, 0x00000000); + mtsdram(SDRAM0_ECCCFG, 0x00000000); /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ - mtsdram(mem_eccerr, 0xffffffff); + mtsdram(SDRAM0_ECCESR, 0xffffffff); /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */ - mtsdram(mem_sdtr1, 0x008a4015); + mtsdram(SDRAM0_TR, 0x008a4015); /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 * and refresh timer */ switch (dram_size >> 20) { case 32: - mtsdram(mem_mb0cf, 0x00062001); - mtsdram(mem_rtr, 0x07F00000); + mtsdram(SDRAM0_B0CR, 0x00062001); + mtsdram(SDRAM0_RTR, 0x07F00000); break; case 64: - mtsdram(mem_mb0cf, 0x00084001); - mtsdram(mem_rtr, 0x04100000); + mtsdram(SDRAM0_B0CR, 0x00084001); + mtsdram(SDRAM0_RTR, 0x04100000); break; case 128: - mtsdram(mem_mb0cf, 0x000A4001); - mtsdram(mem_rtr, 0x04100000); + mtsdram(SDRAM0_B0CR, 0x000A4001); + mtsdram(SDRAM0_RTR, 0x04100000); break; default: printf("Invalid memory size of %d MB given\n", dram_size >> 20); } /* Power management idle timer set to the default. */ - mtsdram(mem_pmit, 0x07c00000); + mtsdram(SDRAM0_PMIT, 0x07c00000); udelay (500); /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */ - mtsdram(mem_mcopt1, 0x90800000); + mtsdram(SDRAM0_CFG, 0x90800000); #ifdef DEBUG printf("%s: done\n", __FUNCTION__); diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index 40bec8edc..ba3e9c3cf 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -58,12 +58,12 @@ int board_early_init_f (void) * IRQ 17-24 RESERVED/UNUSED * IRQ 31 (EXT IRQ 6) (unused) */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr(uicpr, 0xFFFFE000); /* set int polarities */ - mtdcr(uictr, 0x00000000); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */ + mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ mtdcr(CPC0_CR1, CPC0_CR1_VALUE); mtdcr(CPC0_ECR, 0x60606000); diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 836c0346d..4522612da 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -129,29 +129,29 @@ int board_early_init_f(void) /* * Setup the interrupt controller polarities, triggers, etc. */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ - mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ mtsdr(SDR0_PFC0, 0x00003E00); /* Pin function: */ mtsdr(SDR0_PFC1, 0x00848000); /* Pin function: UART0 has 4 pins */ diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 9054282c9..945d79aa2 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -64,12 +64,12 @@ int board_early_init_f (void) * IRQ 17-24 RESERVED/UNUSED * IRQ 31 (EXT IRQ 6) (unused) */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr(uicpr, 0xFFFFE000); /* set int polarities */ - mtdcr(uictr, 0x00000000); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */ + mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ mtdcr(CPC0_CR1, CPC0_CR1_VALUE); mtdcr(CPC0_ECR, 0x60606000); diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index f966d02f1..ac059a903 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -155,21 +155,21 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000001); /* UIC1 crit is critical */ - mtdcr(uic0pr, 0xfffffe1f); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00000); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000001); /* UIC1 crit is critical */ + mtdcr(UIC0PR, 0xfffffe1f); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ /*-------------------------------------------------------------------- * Setup other serial configuration diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index be79b42bd..cdb91ac36 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -60,36 +60,36 @@ int board_early_init_f (void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (uic1pr, 0xfffffe03); /* per manual */ - mtdcr (uic1tr, 0x01c00000); /* per manual */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ + mtdcr (UIC1ER, 0x00000000); /* disable all */ + mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr (UIC1PR, 0xfffffe03); /* per manual */ + mtdcr (UIC1TR, 0x01c00000); /* per manual */ + mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ + mtdcr (UIC2ER, 0x00000000); /* disable all */ + mtdcr (UIC2CR, 0x00000000); /* all non-critical */ + mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ + mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ + mtdcr (UIC3ER, 0x00000000); /* disable all */ + mtdcr (UIC3CR, 0x00000000); /* all non-critical */ + mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); /* */ - mtdcr (uic0tr, 0x00000000); /* */ - mtdcr (uic0vr, 0x00000001); /* */ + mtdcr (UIC0SR, 0xfc000000); /* clear all */ + mtdcr (UIC0ER, 0x00000000); /* disable all */ + mtdcr (UIC0CR, 0x00000000); /* all non-critical */ + mtdcr (UIC0PR, 0xfc000000); /* */ + mtdcr (UIC0TR, 0x00000000); /* */ + mtdcr (UIC0VR, 0x00000001); /* */ /* Setup shutdown/SSD empty interrupt as inputs */ out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY)); diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 18054e45b..20fd4dc27 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -101,21 +101,21 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000001); /* UIC1 crit is critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000001); /* UIC1 crit is critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ return 0; } diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c index ffc47de25..f878c49bf 100644 --- a/board/quad100hd/quad100hd.c +++ b/board/quad100hd/quad100hd.c @@ -40,13 +40,13 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { /* taken from PPCBoot */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); - mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */ - mtdcr(uictr, 0x00000000); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); + mtdcr(UIC0PR, 0xFFFF7FFE); /* set int polarities */ + mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */ diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index d8b0564b3..e1c61463d 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -266,11 +266,11 @@ long int fixed_sdram (void) /*-------------------------------------------------------------------- * Setup some default *------------------------------------------------------------------*/ - mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ /*-------------------------------------------------------------------- * Setup for board-specific specific mem @@ -278,20 +278,20 @@ long int fixed_sdram (void) /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ + mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ /* RA=10 RD=3 */ - mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ + mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ + mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ + mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ udelay (400); /* Delay 200 usecs (min) */ /*-------------------------------------------------------------------- * Enable the controller, then wait for DCEN to complete *------------------------------------------------------------------*/ - mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ + mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ for (;;) { - mfsdram (mem_mcsts, reg); + mfsdram (SDRAM0_MCSTS, reg); if (reg & 0x80000000) break; } diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index b80c20694..92b15aa50 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -212,36 +212,36 @@ int board_early_init_f (void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000000); /* all non- critical */ - mtdcr (uic1pr, 0xfffffe03); /* polarity */ - mtdcr (uic1tr, 0x01c00000); /* trigger edge vs level */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ + mtdcr (UIC1ER, 0x00000000); /* disable all */ + mtdcr (UIC1CR, 0x00000000); /* all non- critical */ + mtdcr (UIC1PR, 0xfffffe03); /* polarity */ + mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */ + mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffc8ff); /* polarity */ - mtdcr (uic2tr, 0x00ff0000); /* trigger edge vs level */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ + mtdcr (UIC2ER, 0x00000000); /* disable all */ + mtdcr (UIC2CR, 0x00000000); /* all non-critical */ + mtdcr (UIC2PR, 0xffffc8ff); /* polarity */ + mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */ + mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffff83ff); /* polarity */ - mtdcr (uic3tr, 0x00ff8c0f); /* trigger edge vs level */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ + mtdcr (UIC3ER, 0x00000000); /* disable all */ + mtdcr (UIC3CR, 0x00000000); /* all non-critical */ + mtdcr (UIC3PR, 0xffff83ff); /* polarity */ + mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */ + mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); - mtdcr (uic0tr, 0x00000000); - mtdcr (uic0vr, 0x00000001); + mtdcr (UIC0SR, 0xfc000000); /* clear all */ + mtdcr (UIC0ER, 0x00000000); /* disable all */ + mtdcr (UIC0CR, 0x00000000); /* all non-critical */ + mtdcr (UIC0PR, 0xfc000000); + mtdcr (UIC0TR, 0x00000000); + mtdcr (UIC0VR, 0x00000001); fpga_init(); diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index ad3f9bc28..0c8e6dfb1 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -202,36 +202,36 @@ int board_early_init_f (void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000000); /* all non- critical */ - mtdcr (uic1pr, 0xfffffe03); /* polarity */ - mtdcr (uic1tr, 0x01c00000); /* trigger edge vs level */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ + mtdcr (UIC1ER, 0x00000000); /* disable all */ + mtdcr (UIC1CR, 0x00000000); /* all non- critical */ + mtdcr (UIC1PR, 0xfffffe03); /* polarity */ + mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */ + mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffc8ff); /* polarity */ - mtdcr (uic2tr, 0x00ff0000); /* trigger edge vs level */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ + mtdcr (UIC2ER, 0x00000000); /* disable all */ + mtdcr (UIC2CR, 0x00000000); /* all non-critical */ + mtdcr (UIC2PR, 0xffffc8ff); /* polarity */ + mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */ + mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffff83ff); /* polarity */ - mtdcr (uic3tr, 0x00ff8c0f); /* trigger edge vs level */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ + mtdcr (UIC3ER, 0x00000000); /* disable all */ + mtdcr (UIC3CR, 0x00000000); /* all non-critical */ + mtdcr (UIC3PR, 0xffff83ff); /* polarity */ + mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */ + mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); - mtdcr (uic0tr, 0x00000000); - mtdcr (uic0vr, 0x00000001); + mtdcr (UIC0SR, 0xfc000000); /* clear all */ + mtdcr (UIC0ER, 0x00000000); /* disable all */ + mtdcr (UIC0CR, 0x00000000); /* all non-critical */ + mtdcr (UIC0PR, 0xfc000000); + mtdcr (UIC0TR, 0x00000000); + mtdcr (UIC0VR, 0x00000001); fpga_init(); diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c index 66842eaf4..74e6204db 100644 --- a/board/sbc405/sbc405.c +++ b/board/sbc405/sbc405.c @@ -41,13 +41,13 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ + mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c index 5ae7b1244..63927f729 100644 --- a/board/sc3/sc3.c +++ b/board/sc3/sc3.c @@ -294,22 +294,22 @@ int board_early_init_f (void) writeb (cpldConfig_1, CPLD_CONTROL_1); /* disable everything in CPLD */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ if (IS_CAMERON) { sc3_cameron_init(); mtdcr (0x0B6, 0x18000000); - mtdcr (uicpr, 0xFFFFFFF0); - mtdcr (uictr, 0x10001030); + mtdcr (UIC0PR, 0xFFFFFFF0); + mtdcr (UIC0TR, 0x10001030); } else { mtdcr (0x0B6, 0x0000000); - mtdcr (uicpr, 0xFFFFFFE0); - mtdcr (uictr, 0x10000020); + mtdcr (UIC0PR, 0xFFFFFFE0); + mtdcr (UIC0TR, 0x10000020); } - mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ /* setup other implementation specific details */ mtdcr (CPC0_ECR, 0x60606000); @@ -577,7 +577,7 @@ static int printSDRAMConfig(char reg, unsigned long cr) } #ifdef SC3_DEBUGOUT -static unsigned int mbcf[] = {mem_mb0cf, mem_mb1cf, mem_mb2cf, mem_mb3cf}; +static unsigned int mbcf[] = {SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR}; #endif phys_size_t initdram (int board_type) @@ -591,7 +591,7 @@ phys_size_t initdram (int board_type) puts("\nSDRAM configuration:\n"); - mtdcr (SDRAM0_CFGADDR, mem_mcopt1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); ul1 = mfdcr(SDRAM0_CFGDATA); if (!(ul1 & 0x80000000)) { @@ -604,7 +604,7 @@ phys_size_t initdram (int board_type) mems += printSDRAMConfig (i, ul1); } - mtdcr (SDRAM0_CFGADDR, mem_sdtr1); + mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); ul1 = mfdcr(SDRAM0_CFGDATA); printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1); @@ -614,14 +614,14 @@ phys_size_t initdram (int board_type) printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4); printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1)); puts ("Misc:\n"); - mtdcr (SDRAM0_CFGADDR, mem_rtr); + mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); ul1 = mfdcr(SDRAM0_CFGDATA); printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7); - mtdcr(SDRAM0_CFGADDR,mem_pmit); + mtdcr(SDRAM0_CFGADDR,SDRAM0_PMIT); ul2=mfdcr(SDRAM0_CFGDATA); - mtdcr(SDRAM0_CFGADDR,mem_mcopt1); + mtdcr(SDRAM0_CFGADDR,SDRAM0_CFG); ul1=mfdcr(SDRAM0_CFGDATA); if (ul1 & 0x20000000) @@ -658,7 +658,7 @@ phys_size_t initdram (int board_type) else puts(" -Memory lines only at write cycles active outputs\n"); - mtdcr (SDRAM0_CFGADDR, mem_status); + mtdcr (SDRAM0_CFGADDR, SDRAM0_STATUS); ul1 = mfdcr (SDRAM0_CFGDATA); if (ul1 & 0x80000000) puts(" -SDRAM Controller ready\n"); @@ -670,19 +670,19 @@ phys_size_t initdram (int board_type) return (mems * 1024 * 1024); #else - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); ul1 = mfdcr (SDRAM0_CFGDATA); mems = printSDRAMConfig (0, ul1); - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); ul1 = mfdcr (SDRAM0_CFGDATA); mems += printSDRAMConfig (1, ul1); - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); ul1 = mfdcr(SDRAM0_CFGDATA); mems += printSDRAMConfig (2, ul1); - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); ul1 = mfdcr(SDRAM0_CFGDATA); mems += printSDRAMConfig (3, ul1); diff --git a/board/w7o/init.S b/board/w7o/init.S index 090b07a1e..5477f986b 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -182,7 +182,7 @@ sdram_init: * Disable memory controller to allow * values to be changed. */ - addi r3, 0, mem_mcopt1 + addi r3, 0, SDRAM0_CFG mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x0 ori r4, r4, 0x0 @@ -192,7 +192,7 @@ sdram_init: * Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2 * All other banks are disabled. */ - addi r3, 0, mem_mb0cf + addi r3, 0, SDRAM0_B0CR mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x0000 /* BA=0x0, SZ=4MB */ ori r4, r4, 0x8001 /* Mode is 5, 11x8x2or4, BE=Enabled */ @@ -222,7 +222,7 @@ sdram_init: /* * Set up SDTR1 */ - addi r3, 0, mem_sdtr1 + addi r3, 0, SDRAM0_TR mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x0086 /* SDTR1 value for 100Mhz */ ori r4, r4, 0x400D @@ -231,7 +231,7 @@ sdram_init: /* * Set RTR */ - addi r3, 0, mem_rtr + addi r3, 0, SDRAM0_RTR mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x05F0 /* RTR refresh val = 15.625ms@100Mhz */ mtdcr SDRAM0_CFGDATA, r4 @@ -250,7 +250,7 @@ sdram_init: /******************************************************************** * Set memory controller options reg, MCOPT1. *******************************************************************/ - addi r3, 0, mem_mcopt1 + addi r3, 0, SDRAM0_CFG mtdcr SDRAM0_CFGADDR, r3 addis r4, 0, 0x80E0 /* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */ ori r4, r4, 0x0000 /* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */ diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c index 6479beeb1..a818808ba 100644 --- a/board/w7o/w7o.c +++ b/board/w7o/w7o.c @@ -64,16 +64,16 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive * IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0, + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ #elif defined(CONFIG_W7OLMC) /* @@ -95,16 +95,16 @@ int board_early_init_f (void) * IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive * IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0ER, 0x00000000); /* disable all ints */ - mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ - mtdcr (uicvcr, 0x00000001); /* set vect base=0, + mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr (UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */ - mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ #else /* Unknown */ # error "Unknown W7O board configuration" @@ -170,16 +170,16 @@ unsigned long get_dram_size (void) int size = 0; /* Get bank Size registers */ - mtdcr (SDRAM0_CFGADDR, mem_mb0cf); /* get bank 0 config reg */ + mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); /* get bank 0 config reg */ regs[0] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb1cf); /* get bank 1 config reg */ + mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); /* get bank 1 config reg */ regs[1] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb2cf); /* get bank 2 config reg */ + mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); /* get bank 2 config reg */ regs[2] = mfdcr (SDRAM0_CFGDATA); - mtdcr (SDRAM0_CFGADDR, mem_mb3cf); /* get bank 3 config reg */ + mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); /* get bank 3 config reg */ regs[3] = mfdcr (SDRAM0_CFGDATA); /* compute the size, add each bank if enabled */ diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index 58041fcd3..011fb94bb 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -74,36 +74,36 @@ int board_early_init_f(void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */ - mtdcr(uic1pr, 0xfffffe00); /* per ref-board manual */ - mtdcr(uic1tr, 0x01c00000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000003); /* SMI & UIC1 crit are critical */ + mtdcr(UIC1PR, 0xfffffe00); /* per ref-board manual */ + mtdcr(UIC1TR, 0x01c00000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ - mtdcr(uic2er, 0x00000000); /* disable all */ - mtdcr(uic2cr, 0x00000000); /* all non-critical */ - mtdcr(uic2pr, 0xffffc0ff); /* per ref-board manual */ - mtdcr(uic2tr, 0x00ff8000); /* per ref-board manual */ - mtdcr(uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffc0ff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00ff8000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(uic3sr, 0xffffffff); /* clear all */ - mtdcr(uic3er, 0x00000000); /* disable all */ - mtdcr(uic3cr, 0x00000000); /* all non-critical */ - mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr(uic3tr, 0x00ff8c0f); /* per ref-board manual */ - mtdcr(uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic3sr, 0xffffffff); /* clear all */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ + mtdcr(UIC3ER, 0x00000000); /* disable all */ + mtdcr(UIC3CR, 0x00000000); /* all non-critical */ + mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC3TR, 0x00ff8c0f); /* per ref-board manual */ + mtdcr(UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ - mtdcr(uic0sr, 0xfc000000); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000000); /* all non-critical */ - mtdcr(uic0pr, 0xfc000000); /* */ - mtdcr(uic0tr, 0x00000000); /* */ - mtdcr(uic0vr, 0x00000001); /* */ + mtdcr(UIC0SR, 0xfc000000); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000000); /* all non-critical */ + mtdcr(UIC0PR, 0xfc000000); /* */ + mtdcr(UIC0TR, 0x00000000); /* */ + mtdcr(UIC0VR, 0x00000001); /* */ LED0_ON(); diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c index fc9dfa02c..01273a1f7 100644 --- a/board/zeus/zeus.c +++ b/board/zeus/zeus.c @@ -50,13 +50,13 @@ static u32 start_time; int board_early_init_f(void) { - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - mtdcr(uiccr, 0x00000000); - mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */ - mtdcr(uictr, 0x00000000); /* set int trigger levels */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); + mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */ + mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ /* * Configure CPC0_PCI to enable PerWE as output diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 86837723b..919a0bf6e 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -574,14 +574,18 @@ static int fdt_parse_prop(char **newval, int count, char *data, int *len) * Byte stream. Convert the values. */ newp++; - while ((*newp != ']') && (stridx < count)) { - tmp = simple_strtoul(newp, &newp, 16); - *data++ = tmp & 0xFF; - *len = *len + 1; + while ((stridx < count) && (*newp != ']')) { while (*newp == ' ') newp++; - if (*newp != '\0') + if (*newp == '\0') { newp = newval[++stridx]; + continue; + } + if (!isxdigit(*newp)) + break; + tmp = simple_strtoul(newp, &newp, 16); + *data++ = tmp & 0xFF; + *len = *len + 1; } if (*newp != ']') { printf("Unexpected character '%c'\n", *newp); @@ -589,12 +593,15 @@ static int fdt_parse_prop(char **newval, int count, char *data, int *len) } } else { /* - * Assume it is a string. Copy it into our data area for - * convenience (including the terminating '\0'). + * Assume it is one or more strings. Copy it into our + * data area for convenience (including the + * terminating '\0's). */ while (stridx < count) { - *len = strlen(newp) + 1; + size_t length = strlen(newp) + 1; strcpy(data, newp); + data += length; + *len += length; newp = newval[++stridx]; } } diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 3ed15092a..d0ebd0fd6 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -93,39 +93,39 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #elif defined (CONFIG_405GP) printf ("\n405GP registers; MSR=%08x\n",mfmsr()); printf ("\nUniversal Interrupt Controller Regs\n" - "uicsr uicer uiccr uicpr uictr uicmsr uicvr uicvcr" + "UIC0SR UIC0ER UIC0CR UIC0PR UIC0TR UIC0MSR UIC0VR UIC0VCR" "\n" "%08x %08x %08x %08x %08x %08x %08x %08x\n", - mfdcr(uicsr), - mfdcr(uicer), - mfdcr(uiccr), - mfdcr(uicpr), - mfdcr(uictr), - mfdcr(uicmsr), - mfdcr(uicvr), - mfdcr(uicvcr)); + mfdcr(UIC0SR), + mfdcr(UIC0ER), + mfdcr(UIC0CR), + mfdcr(UIC0PR), + mfdcr(UIC0TR), + mfdcr(UIC0MSR), + mfdcr(UIC0VR), + mfdcr(UIC0VCR)); puts ("\nMemory (SDRAM) Configuration\n" "besra besrsa besrb besrsb bear mcopt1 rtr pmit\n"); - mtdcr(SDRAM0_CFGADDR,mem_besra); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_besrsa); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_besrb); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_besrsb); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_bear); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_mcopt1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_rtr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_pmit); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_BESR0); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_BESRS0); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_BESR1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_BESRS1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_BEAR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_CFG); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_RTR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_PMIT); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); puts ("\n" "mb0cf mb1cf mb2cf mb3cf sdtr1 ecccf eccerr\n"); - mtdcr(SDRAM0_CFGADDR,mem_mb0cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_mb1cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_mb2cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_mb3cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_sdtr1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_ecccf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_eccerr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_B0CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_B1CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_B2CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_B3CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_TR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_ECCCFG); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_ECCESR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); printf ("\n\n" "DMA Channels\n" @@ -180,27 +180,27 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #elif defined(CONFIG_405EP) printf ("\n405EP registers; MSR=%08x\n",mfmsr()); printf ("\nUniversal Interrupt Controller Regs\n" - "uicsr uicer uiccr uicpr uictr uicmsr uicvr uicvcr" + "UIC0SR UIC0ER UIC0CR UIC0PR UIC0TR UIC0MSR UIC0VR UIC0VCR" "\n" "%08x %08x %08x %08x %08x %08x %08x %08x\n", - mfdcr(uicsr), - mfdcr(uicer), - mfdcr(uiccr), - mfdcr(uicpr), - mfdcr(uictr), - mfdcr(uicmsr), - mfdcr(uicvr), - mfdcr(uicvcr)); + mfdcr(UIC0SR), + mfdcr(UIC0ER), + mfdcr(UIC0CR), + mfdcr(UIC0PR), + mfdcr(UIC0TR), + mfdcr(UIC0MSR), + mfdcr(UIC0VR), + mfdcr(UIC0VCR)); puts ("\nMemory (SDRAM) Configuration\n" "mcopt1 rtr pmit mb0cf mb1cf sdtr1\n"); - mtdcr(SDRAM0_CFGADDR,mem_mcopt1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_rtr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_pmit); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_mb0cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_mb1cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); - mtdcr(SDRAM0_CFGADDR,mem_sdtr1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_CFG); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_RTR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_PMIT); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_B0CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_B1CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); + mtdcr(SDRAM0_CFGADDR,SDRAM0_TR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA)); printf ("\n\n" "DMA Channels\n" diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index 5c930d388..031e8d574 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -23,8 +23,8 @@ #include <common.h> #include <mpc83xx.h> #include <ioports.h> -#ifdef CONFIG_USB_EHCI_FSL #include <asm/io.h> +#ifdef CONFIG_USB_EHCI_FSL #include <usb/ehci-fsl.h> #endif @@ -63,149 +63,163 @@ static void config_qe_ioports(void) */ void cpu_init_f (volatile immap_t * im) { - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - /* system performance tweaking */ - -#ifdef CONFIG_SYS_ACR_PIPE_DEP - /* Arbiter pipeline depth */ - im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | - (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT); + __be32 acr_mask = +#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ + (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | #endif - -#ifdef CONFIG_SYS_ACR_RPTCNT - /* Arbiter repeat count */ - im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) | - (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT); +#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ + (ACR_RPTCNT << ACR_RPTCNT_SHIFT) | #endif - + 0; + __be32 acr_val = +#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ + (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | +#endif +#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ + (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) | +#endif + 0; + __be32 spcr_mask = +#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */ + (SPCR_OPT << SPCR_OPT_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ + (SPCR_TSECEP << SPCR_TSECEP_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ + (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | +#endif +#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ + (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | +#endif + 0; + __be32 spcr_val = #ifdef CONFIG_SYS_SPCR_OPT - /* Optimize transactions between CSB and other devices */ - im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) | - (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT); + (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) | #endif - -#ifdef CONFIG_SYS_SPCR_TSECEP - /* all eTSEC's Emergency priority */ - im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) | - (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT); +#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ + (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) | #endif - -#ifdef CONFIG_SYS_SPCR_TSEC1EP - /* TSEC1 Emergency priority */ - im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | - (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT); +#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ + (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | #endif - -#ifdef CONFIG_SYS_SPCR_TSEC2EP - /* TSEC2 Emergency priority */ - im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | - (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT); +#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ + (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_ENCCM - /* Encryption clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) | - (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT); + 0; + __be32 sccr_mask = +#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ + (SCCR_ENCCM << SCCR_ENCCM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_PCICM - /* PCI & DMA clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) | - (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT); +#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ + (SCCR_PCICM << SCCR_PCICM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_TSECCM - /* all TSEC's clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_TSECCM) | - (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT); +#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ + (SCCR_TSECCM << SCCR_TSECCM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_TSEC1CM - /* TSEC1 clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | - (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT); +#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ + (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_TSEC2CM - /* TSEC2 clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | - (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT); +#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ + (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_TSEC1ON - /* TSEC1 clock switch */ - im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | - (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT); +#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ + (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_TSEC2ON - /* TSEC2 clock switch */ - im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | - (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT); +#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ + (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_USBMPHCM - /* USB MPH clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | - (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT); +#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ + (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_USBDRCM - /* USB DR clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) | - (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT); +#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ + (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | #endif - -#ifdef CONFIG_SYS_SCCR_SATACM - /* SATA controller clock mode */ - im->clk.sccr = (im->clk.sccr & ~SCCR_SATACM) | - (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT); +#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ + (SCCR_SATACM << SCCR_SATACM_SHIFT) | +#endif + 0; + __be32 sccr_val = +#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ + (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) | #endif +#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */ + (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ + (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ + (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ + (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ + (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */ + (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ + (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ + (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | +#endif +#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ + (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | +#endif + 0; + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + + /* system performance tweaking */ + clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val); + + clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val); + + clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val); /* RSR - Reset Status Register - clear all status (4.6.1.3) */ - gd->reset_status = im->reset.rsr; - im->reset.rsr = ~(RSR_RES); + gd->reset_status = __raw_readl(&im->reset.rsr); + __raw_writel(~(RSR_RES), &im->reset.rsr); /* AER - Arbiter Event Register - store status */ - gd->arbiter_event_attributes = im->arbiter.aeatr; - gd->arbiter_event_address = im->arbiter.aeadr; + gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr); + gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr); /* * RMR - Reset Mode Register * contains checkstop reset enable (4.6.1.4) */ - im->reset.rmr = (RMR_CSRE & (1<<RMR_CSRE_SHIFT)); - - /* LCRR - Clock Ratio Register (10.3.1.16) */ - im->lbus.lcrr = CONFIG_SYS_LCRR; + __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr); - /* Enable Time Base & Decrimenter ( so we will have udelay() )*/ - im->sysconf.spcr |= SPCR_TBEN; + /* Enable Time Base & Decrementer ( so we will have udelay() )*/ + setbits_be32(&im->sysconf.spcr, SPCR_TBEN); /* System General Purpose Register */ #ifdef CONFIG_SYS_SICRH #if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313) /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ - im->sysconf.sicrh = (im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH; + __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH, + &im->sysconf.sicrh); #else - im->sysconf.sicrh = CONFIG_SYS_SICRH; + __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh); #endif #endif #ifdef CONFIG_SYS_SICRL - im->sysconf.sicrl = CONFIG_SYS_SICRL; + __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); #endif - /* DDR control driver register */ -#ifdef CONFIG_SYS_DDRCDR - im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR; +#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ + __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); #endif - /* Output buffer impedance register */ -#ifdef CONFIG_SYS_OBIR - im->sysconf.obir = CONFIG_SYS_OBIR; +#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */ + __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir); #endif #ifdef CONFIG_QE @@ -308,7 +322,7 @@ void cpu_init_f (volatile immap_t * im) /* Wait for clock to stabilize */ do { - temp = in_be32(&ehci->control); + temp = __raw_readl(&ehci->control); udelay(1000); } while (!(temp & PHY_CLK_VALID)); #endif @@ -317,8 +331,41 @@ void cpu_init_f (volatile immap_t * im) int cpu_init_r (void) { + volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; #ifdef CONFIG_QE uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */ +#endif + __be32 lcrr_mask = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ + LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + LCRR_CLKDIV | +#endif + 0; + __be32 lcrr_val = +#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ + CONFIG_SYS_LCRR_DBYP | +#endif +#ifdef CONFIG_SYS_LCRR_EADC + CONFIG_SYS_LCRR_EADC | +#endif +#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ + CONFIG_SYS_LCRR_CLKDIV | +#endif + 0; + + /* LCRR - Clock Ratio Register (10.3.1.16) + * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description + */ + clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->lbus.lcrr); + isync(); + +#ifdef CONFIG_QE qe_init(qe_base); qe_reset(); #endif diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c index 83fa709da..5e6dbe333 100644 --- a/cpu/ppc4xx/40x_spd_sdram.c +++ b/cpu/ppc4xx/40x_spd_sdram.c @@ -422,32 +422,31 @@ long int spd_sdram(int(read_spd)(uint addr)) * program all the registers. * -------------------------------------------------------------------*/ -#define mtsdram0(reg, data) mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data) /* disable memcontroller so updates work */ - mtsdram0( mem_mcopt1, 0 ); + mtsdram(SDRAM0_CFG, 0); #ifndef CONFIG_405EP /* not on PPC405EP */ - mtsdram0( mem_besra , sdram0_besr0 ); - mtsdram0( mem_besrb , sdram0_besr1 ); - mtsdram0( mem_ecccf , sdram0_ecccfg ); - mtsdram0( mem_eccerr, sdram0_eccesr ); + mtsdram(SDRAM0_BESR0, sdram0_besr0); + mtsdram(SDRAM0_BESR1, sdram0_besr1); + mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg); + mtsdram(SDRAM0_ECCESR, sdram0_eccesr); #endif - mtsdram0( mem_rtr , sdram0_rtr ); - mtsdram0( mem_pmit , sdram0_pmit ); - mtsdram0( mem_mb0cf , sdram0_b0cr ); - mtsdram0( mem_mb1cf , sdram0_b1cr ); + mtsdram(SDRAM0_RTR, sdram0_rtr); + mtsdram(SDRAM0_PMIT, sdram0_pmit); + mtsdram(SDRAM0_B0CR, sdram0_b0cr); + mtsdram(SDRAM0_B1CR, sdram0_b1cr); #ifndef CONFIG_405EP /* not on PPC405EP */ - mtsdram0( mem_mb2cf , sdram0_b2cr ); - mtsdram0( mem_mb3cf , sdram0_b3cr ); + mtsdram(SDRAM0_B2CR, sdram0_b2cr); + mtsdram(SDRAM0_B3CR, sdram0_b3cr); #endif - mtsdram0( mem_sdtr1 , sdram0_tr ); + mtsdram(SDRAM0_TR, sdram0_tr); /* SDRAM have a power on delay, 500 micro should do */ udelay(500); sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR; if (ecc_on) sdram0_cfg |= SDRAM0_CFG_MEMCHK; - mtsdram0(mem_mcopt1, sdram0_cfg); + mtsdram(SDRAM0_CFG, sdram0_cfg); return (total_size); } diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index c93f23a67..6176eabfb 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -230,7 +230,7 @@ long int spd_sdram(void) { /* * program SDRAM Clock Timing Register (SDRAM0_CLKTR) */ - mtsdram(mem_clktr, 0x40000000); + mtsdram(SDRAM0_CLKTR, 0x40000000); /* * delay to ensure 200 usec has elapsed @@ -240,14 +240,14 @@ long int spd_sdram(void) { /* * enable the memory controller */ - mfsdram(mem_cfg0, cfg0); - mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN); + mfsdram(SDRAM0_CFG0, cfg0); + mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN); /* * wait for SDRAM_CFG0_DC_EN to complete */ while (1) { - mfsdram(mem_mcsts, mcsts); + mfsdram(SDRAM0_MCSTS, mcsts); if ((mcsts & SDRAM_MCSTS_MRSC) != 0) break; } @@ -386,7 +386,7 @@ static void program_cfg0(unsigned long *dimm_populated, /* * get Memory Controller Options 0 data */ - mfsdram(mem_cfg0, cfg0); + mfsdram(SDRAM0_CFG0, cfg0); /* * clear bits @@ -457,7 +457,7 @@ static void program_cfg0(unsigned long *dimm_populated, * Note: DCEN must be enabled after all DDR SDRAM controller * configuration registers get initialized. */ - mtsdram(mem_cfg0, cfg0); + mtsdram(SDRAM0_CFG0, cfg0); } static void program_cfg1(unsigned long *dimm_populated, @@ -465,7 +465,7 @@ static void program_cfg1(unsigned long *dimm_populated, unsigned long num_dimm_banks) { unsigned long cfg1; - mfsdram(mem_cfg1, cfg1); + mfsdram(SDRAM0_CFG1, cfg1); /* * Self-refresh exit, disable PM @@ -475,7 +475,7 @@ static void program_cfg1(unsigned long *dimm_populated, /* * program Memory Controller Options 1 */ - mtsdram(mem_cfg1, cfg1); + mtsdram(SDRAM0_CFG1, cfg1); } static void program_rtr(unsigned long *dimm_populated, @@ -535,7 +535,7 @@ static void program_rtr(unsigned long *dimm_populated, /* * program Refresh Timer Register (SDRAM0_RTR) */ - mtsdram(mem_rtr, sdram_rtr); + mtsdram(SDRAM0_RTR, sdram_rtr); } static void program_tr0(unsigned long *dimm_populated, @@ -576,7 +576,7 @@ static void program_tr0(unsigned long *dimm_populated, /* * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits */ - mfsdram(mem_tr0, tr0); + mfsdram(SDRAM0_TR0, tr0); tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK | SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK | SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK | @@ -821,7 +821,7 @@ static void program_tr0(unsigned long *dimm_populated, } debug("tr0: %x\n", tr0); - mtsdram(mem_tr0, tr0); + mtsdram(SDRAM0_TR0, tr0); } static int short_mem_test(void) @@ -848,7 +848,7 @@ static int short_mem_test(void) 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}}; for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { - mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bxcr_num << 2)); + mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2)); if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { /* Bank is enabled */ membase = (unsigned long*) @@ -918,11 +918,11 @@ static void program_tr1(void) /* * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits */ - mfsdram(mem_tr1, tr1); + mfsdram(SDRAM0_TR1, tr1); tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK | SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK); - mfsdram(mem_tr0, tr0); + mfsdram(SDRAM0_TR0, tr0); if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) && (sys_info.freqPLB > 100000000)) { tr1 |= SDRAM_TR1_RDSS_TR2; @@ -937,14 +937,14 @@ static void program_tr1(void) /* * save CFG0 ECC setting to a temporary variable and turn ECC off */ - mfsdram(mem_cfg0, cfg0); + mfsdram(SDRAM0_CFG0, cfg0); ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK; - mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON); + mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON); /* * get the delay line calibration register value */ - mfsdram(mem_dlycal, dlycal); + mfsdram(SDRAM0_DLYCAL, dlycal); dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2; max_pass_length = 0; @@ -964,7 +964,7 @@ static void program_tr1(void) /* * Set the timing reg for the test. */ - mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt))); + mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt))); if (short_mem_test()) { if (fail_found == TRUE) { @@ -1018,7 +1018,7 @@ static void program_tr1(void) /* * restore the orignal ECC setting */ - mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp); + mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp); /* * set the SDRAM TR1 RDCD value @@ -1056,7 +1056,7 @@ static void program_tr1(void) /* * program SDRAM Timing Register 1 TR1 */ - mtsdram(mem_tr1, tr1); + mtsdram(SDRAM0_TR1, tr1); } static unsigned long program_bxcr(unsigned long *dimm_populated, @@ -1086,7 +1086,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, * Set the BxCR regs. First, wipe out the bank config registers. */ for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) { - mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bx_cr_num << 2)); + mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2)); mtdcr(SDRAM0_CFGDATA, 0x00000000); bank_parms[bx_cr_num].bank_size_bytes = 0; } @@ -1232,7 +1232,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, /* Set the SDRAM0_BxCR regs thanks to sort tables */ for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) { if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) { - mtdcr(SDRAM0_CFGADDR, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2)); + mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2)); temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK | SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE); temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) | diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index 5a3336e3c..30c6e0e38 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -188,14 +188,14 @@ phys_size_t initdram(int board_type) /* * Disable memory controller. */ - mtsdram(mem_mcopt1, 0x00000000); + mtsdram(SDRAM0_CFG, 0x00000000); /* * Set MB0CF for bank 0. */ - mtsdram(mem_mb0cf, mb0cf[i].reg); - mtsdram(mem_sdtr1, sdtr1); - mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); + mtsdram(SDRAM0_B0CR, mb0cf[i].reg); + mtsdram(SDRAM0_TR, sdtr1); + mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64)); udelay(200); @@ -204,7 +204,7 @@ phys_size_t initdram(int board_type) * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst * read/prefetch. */ - mtsdram(mem_mcopt1, 0x80800000); + mtsdram(SDRAM0_CFG, 0x80800000); udelay(10000); @@ -216,9 +216,9 @@ phys_size_t initdram(int board_type) * defined (assumes same type as bank 0) */ #ifdef CONFIG_SDRAM_BANK1 - mtsdram(mem_mcopt1, 0x00000000); - mtsdram(mem_mb1cf, mb0cf[i].size | mb0cf[i].reg); - mtsdram(mem_mcopt1, 0x80800000); + mtsdram(SDRAM0_CFG, 0x00000000); + mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg); + mtsdram(SDRAM0_CFG, 0x80800000); udelay(10000); /* @@ -228,8 +228,8 @@ phys_size_t initdram(int board_type) */ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) != mb0cf[i].size) { - mtsdram(mem_mb1cf, 0); - mtsdram(mem_mcopt1, 0); + mtsdram(SDRAM0_B1CR, 0); + mtsdram(SDRAM0_CFG, 0); } else { /* * We have two identical banks, so the size @@ -315,7 +315,7 @@ static void sdram_tr1_set(int ram_address, int* tr1_value) /* go through all possible SDRAM0_TR1[RDCT] values */ for (i=0; i<=0x1ff; i++) { /* set the current value for TR1 */ - mtsdram(mem_tr1, (0x80800800 | i)); + mtsdram(SDRAM0_TR1, (0x80800800 | i)); /* write values */ for (j=0; j<NUM_TRIES; j++) { @@ -383,31 +383,31 @@ phys_size_t initdram(int board_type) /* * Disable memory controller. */ - mtsdram(mem_cfg0, 0x00000000); + mtsdram(SDRAM0_CFG0, 0x00000000); /* * Setup some default */ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_wddctr, CONFIG_SYS_SDRAM0_WDDCTR); - mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR); + mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram(mem_b0cr, mb0cf[i].reg); - mtsdram(mem_tr0, CONFIG_SYS_SDRAM0_TR0); - mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ - mtsdram(mem_rtr, CONFIG_SYS_SDRAM0_RTR); - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ + mtsdram(SDRAM0_B0CR, mb0cf[i].reg); + mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0); + mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ + mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR); + mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/ udelay(400); /* Delay 200 usecs (min) */ /* * Enable the controller, then wait for DCEN to complete */ - mtsdram(mem_cfg0, CONFIG_SYS_SDRAM0_CFG0); + mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0); udelay(10000); if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) { @@ -416,7 +416,7 @@ phys_size_t initdram(int board_type) * Optimize TR1 to current hardware environment */ sdram_tr1_set(0x00000000, &tr1_bank1); - mtsdram(mem_tr1, (tr1_bank1 | 0x80800800)); + mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800)); /* @@ -424,9 +424,9 @@ phys_size_t initdram(int board_type) * defined (assumes same type as bank 0) */ #ifdef CONFIG_SDRAM_BANK1 - mtsdram(mem_cfg0, 0); - mtsdram(mem_b1cr, mb0cf[i].size | mb0cf[i].reg); - mtsdram(mem_cfg0, CONFIG_SYS_SDRAM0_CFG0); + mtsdram(SDRAM0_CFG0, 0); + mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg); + mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0); udelay(10000); /* @@ -436,9 +436,9 @@ phys_size_t initdram(int board_type) */ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) != mb0cf[i].size) { - mtsdram(mem_cfg0, 0); - mtsdram(mem_b1cr, 0); - mtsdram(mem_cfg0, CONFIG_SYS_SDRAM0_CFG0); + mtsdram(SDRAM0_CFG0, 0); + mtsdram(SDRAM0_B1CR, 0); + mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0); udelay(10000); } else { /* diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c index d298b312c..8b1b259fa 100644 --- a/cpu/ppc4xx/uic.c +++ b/cpu/ppc4xx/uic.c @@ -109,7 +109,7 @@ void external_interrupt(struct pt_regs *regs) /* * Read masked interrupt status register to determine interrupt source */ - uic_msr = mfdcr(uic0msr); + uic_msr = mfdcr(UIC0MSR); #if (UIC_MAX > 1) if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) || @@ -129,7 +129,7 @@ void external_interrupt(struct pt_regs *regs) uic_interrupt(UIC3_DCR_BASE, 96); #endif - mtdcr(uic0sr, (uic_msr & UICB0_ALL)); + mtdcr(UIC0SR, (uic_msr & UICB0_ALL)); if (uic_msr & ~(UICB0_ALL)) uic_interrupt(UIC0_DCR_BASE, 0); @@ -140,13 +140,13 @@ void external_interrupt(struct pt_regs *regs) void pic_irq_ack(unsigned int vec) { if ((vec >= 0) && (vec < 32)) - mtdcr(uicsr, UIC_MASK(vec)); + mtdcr(UIC0SR, UIC_MASK(vec)); else if ((vec >= 32) && (vec < 64)) - mtdcr(uic1sr, UIC_MASK(vec)); + mtdcr(UIC1SR, UIC_MASK(vec)); else if ((vec >= 64) && (vec < 96)) - mtdcr(uic2sr, UIC_MASK(vec)); + mtdcr(UIC2SR, UIC_MASK(vec)); else if (vec >= 96) - mtdcr(uic3sr, UIC_MASK(vec)); + mtdcr(UIC3SR, UIC_MASK(vec)); } /* @@ -156,13 +156,13 @@ void pic_irq_enable(unsigned int vec) { if ((vec >= 0) && (vec < 32)) - mtdcr(uicer, mfdcr(uicer) | UIC_MASK(vec)); + mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec)); else if ((vec >= 32) && (vec < 64)) - mtdcr(uic1er, mfdcr(uic1er) | UIC_MASK(vec)); + mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec)); else if ((vec >= 64) && (vec < 96)) - mtdcr(uic2er, mfdcr(uic2er) | UIC_MASK(vec)); + mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec)); else if (vec >= 96) - mtdcr(uic3er, mfdcr(uic3er) | UIC_MASK(vec)); + mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec)); debug("Install interrupt vector %d\n", vec); } @@ -170,11 +170,11 @@ void pic_irq_enable(unsigned int vec) void pic_irq_disable(unsigned int vec) { if ((vec >= 0) && (vec < 32)) - mtdcr(uicer, mfdcr(uicer) & ~UIC_MASK(vec)); + mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec)); else if ((vec >= 32) && (vec < 64)) - mtdcr(uic1er, mfdcr(uic1er) & ~UIC_MASK(vec)); + mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec)); else if ((vec >= 64) && (vec < 96)) - mtdcr(uic2er, mfdcr(uic2er) & ~UIC_MASK(vec)); + mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec)); else if (vec >= 96) - mtdcr(uic3er, mfdcr(uic3er) & ~UIC_MASK(vec)); + mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec)); } diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 47bbf792c..2241990f9 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -100,29 +100,9 @@ static const struct fsl_i2c *i2c_dev[2] = { */ static const struct { unsigned short divider; -#ifdef __PPC__ - u8 dfsr; -#endif u8 fdr; } fsl_i2c_speed_map[] = { -#ifdef __PPC__ - {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35}, - {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2}, - {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4}, - {608, 22, 3}, {640, 1, 5}, {672, 32, 3}, {704, 11, 5}, {736, 43, 3}, - {768, 1, 6}, {800, 54, 3}, {832, 11, 6}, {896, 1, 42}, {960, 1, 7}, - {1024, 1, 43}, {1088, 22, 7}, {1152, 1, 8}, {1216, 43, 7}, {1280, 1, 9}, - {1408, 22, 9}, {1536, 1, 10}, {1664, 22, 10}, {1792, 1, 46}, - {1920, 1, 11}, {2048, 1, 47}, {2176, 43, 11}, {2304, 1, 12}, - {2560, 1, 13}, {2816, 43, 13}, {3072, 1, 14}, {3328, 43, 14}, - {3584, 1, 50}, {3840, 1, 15}, {4096, 1, 51}, {4608, 1, 16}, - {5120, 1, 17}, {6144, 1, 18}, {7168, 1, 54}, {7680, 1, 19}, - {8192, 1, 55}, {9216, 1, 20}, {10240, 1, 21}, {12288, 1, 22}, - {14336, 1, 58}, {15360, 1, 23}, {16384, 1, 59}, {18432, 1, 24}, - {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27}, - {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30}, - {61440, 1, 31}, {-1, 1, 31} -#elif defined(__M68K__) +#ifdef __M68K__ {20, 32}, {22, 33}, {24, 34}, {26, 35}, {28, 0}, {28, 36}, {30, 1}, {32, 37}, {34, 2}, {36, 38}, {40, 3}, {40, 39}, @@ -158,7 +138,6 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, unsigned int i2c_clk, unsigned int speed) { unsigned short divider = min(i2c_clk / speed, (unsigned short) -1); - unsigned int i; /* * We want to choose an FDR/DFSR that generates an I2C bus speed that @@ -166,23 +145,72 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, * want the first divider that is equal to or greater than the * calculated divider. */ +#ifdef __PPC__ + u8 dfsr, fdr = 0x31; /* Default if no FDR found */ + /* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */ + unsigned short a, b, ga, gb; + unsigned long c_div, est_div; + +#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR + dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR; +#else + /* Condition 1: dfsr <= 50/T */ + dfsr = (5 * (i2c_clk / 1000)) / 100000; +#endif +#ifdef CONFIG_FSL_I2C_CUSTOM_FDR + fdr = CONFIG_FSL_I2C_CUSTOM_FDR; + speed = i2c_clk / divider; /* Fake something */ +#else + debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk); + if (!dfsr) + dfsr = 1; + + est_div = ~0; + for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) { + for (gb = 0; gb < 8; gb++) { + b = 16 << gb; + c_div = b * (a + ((3*dfsr)/b)*2); + if ((c_div > divider) && (c_div < est_div)) { + unsigned short bin_gb, bin_ga; + + est_div = c_div; + bin_gb = gb << 2; + bin_ga = (ga & 0x3) | ((ga & 0x4) << 3); + fdr = bin_gb | bin_ga; + speed = i2c_clk / est_div; + debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, " + "a:%d, b:%d, speed:%d\n", + fdr, est_div, ga, gb, a, b, speed); + /* Condition 2 not accounted for */ + debug("Tr <= %d ns\n", + (b - 3 * dfsr) * 1000000 / + (i2c_clk / 1000)); + } + } + if (a == 20) + a += 2; + if (a == 24) + a += 4; + } + debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr); + debug("FDR:0x%.2x, speed:%d\n", fdr, speed); +#endif + writeb(dfsr, &dev->dfsrr); /* set default filter */ + writeb(fdr, &dev->fdr); /* set bus speed */ +#else + unsigned int i; for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++) if (fsl_i2c_speed_map[i].divider >= divider) { u8 fdr; -#ifdef __PPC__ - u8 dfsr; - dfsr = fsl_i2c_speed_map[i].dfsr; -#endif + fdr = fsl_i2c_speed_map[i].fdr; speed = i2c_clk / fsl_i2c_speed_map[i].divider; writeb(fdr, &dev->fdr); /* set bus speed */ -#ifdef __PPC__ - writeb(dfsr, &dev->dfsrr); /* set default filter */ -#endif + break; } - +#endif return speed; } @@ -223,7 +251,7 @@ i2c_init(int speed, int slaveadd) #endif } -static __inline__ int +static int i2c_wait4bus(void) { unsigned long long timeval = get_ticks(); @@ -248,6 +276,8 @@ i2c_wait(int write) csr = readb(&i2c_dev[i2c_bus_num]->sr); if (!(csr & I2C_SR_MIF)) continue; + /* Read again to allow register to stabilise */ + csr = readb(&i2c_dev[i2c_bus_num]->sr); writeb(0x0, &i2c_dev[i2c_bus_num]->sr); @@ -293,9 +323,6 @@ __i2c_write(u8 *data, int length) { int i; - writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, - &i2c_dev[i2c_bus_num]->cr); - for (i = 0; i < length; i++) { writeb(data[i], &i2c_dev[i2c_bus_num]->dr); @@ -326,9 +353,10 @@ __i2c_read(u8 *data, int length) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, + &i2c_dev[i2c_bus_num]->cr); data[i] = readb(&i2c_dev[i2c_bus_num]->dr); } @@ -353,6 +381,9 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + if (i2c_wait4bus()) /* Wait until STOP */ + debug("i2c_read: wait4bus timed out\n"); + if (i == length) return 0; @@ -372,6 +403,8 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) } writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + if (i2c_wait4bus()) /* Wait until STOP */ + debug("i2c_write: wait4bus timed out\n"); if (i == length) return 0; diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h index 1ff9e1daf..2404c6a8f 100644 --- a/drivers/qe/uccf.h +++ b/drivers/qe/uccf.h @@ -25,6 +25,7 @@ #include "common.h" #include "qe.h" +#include "asm/immap_qe.h" /* Fast or Giga ethernet */ diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 156831009..febfbcef5 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -23,6 +23,9 @@ #ifndef __UEC_H__ #define __UEC_H__ +#include "qe.h" +#include "uccf.h" + #define MAX_TX_THREADS 8 #define MAX_RX_THREADS 8 #define MAX_TX_QUEUES 8 @@ -670,6 +673,7 @@ typedef enum enet_interface { ENET_1000_RGMII, ENET_1000_RGMII_ID, ENET_1000_RGMII_RXID, + ENET_1000_RGMII_TXID, ENET_1000_TBI, ENET_1000_RTBI, ENET_1000_SGMII diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index aa4eb5e38..971518394 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -429,12 +429,23 @@ static int marvell_init(struct uec_mii_info *mii_info) { struct eth_device *edev = mii_info->dev; uec_private_t *uec = edev->priv; + enum enet_interface iface = uec->uec_info->enet_interface; - if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) { + if (iface == ENET_1000_RGMII_ID || + iface == ENET_1000_RGMII_RXID || + iface == ENET_1000_RGMII_TXID) { int temp; temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR); - temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY); + if (iface == ENET_1000_RGMII_ID) { + temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY; + } else if (iface == ENET_1000_RGMII_RXID) { + temp &= ~MII_M1111_TX_DELAY; + temp |= MII_M1111_RX_DELAY; + } else if (iface == ENET_1000_RGMII_TXID) { + temp &= ~MII_M1111_RX_DELAY; + temp |= MII_M1111_TX_DELAY; + } phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR); diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index b03ed0bb8..286739c36 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -439,7 +439,7 @@ static unsigned long ubifs_findfile(struct super_block *sb, char *filename) continue; } /* Relative to cur dir */ - sprintf(buf, "%s%s", + sprintf(buf, "%s/%s", link_name, next == NULL ? "" : next); memcpy(symlinkpath, buf, sizeof(buf)); next = name = symlinkpath; diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h index 992a3d221..b6182d4f2 100644 --- a/include/asm-ppc/ppc4xx-sdram.h +++ b/include/asm-ppc/ppc4xx-sdram.h @@ -30,32 +30,27 @@ * SDRAM Controller */ -/* - * XXX - ToDo: Revisit file to change all these lower case defines into - * upper case. Also needs to be done in the controller setup code too - * of course. sr, 2008-06-02 - */ #ifndef CONFIG_405EP -#define mem_besra 0x00 /* bus error syndrome reg a */ -#define mem_besrsa 0x04 /* bus error syndrome reg set a */ -#define mem_besrb 0x08 /* bus error syndrome reg b */ -#define mem_besrsb 0x0c /* bus error syndrome reg set b */ -#define mem_bear 0x10 /* bus error address reg */ +#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */ +#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */ +#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */ +#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */ +#define SDRAM0_BEAR 0x10 /* bus error address reg */ #endif -#define mem_mcopt1 0x20 /* memory controller options 1 */ -#define mem_status 0x24 /* memory status */ -#define mem_rtr 0x30 /* refresh timer reg */ -#define mem_pmit 0x34 /* power management idle timer */ -#define mem_mb0cf 0x40 /* memory bank 0 configuration */ -#define mem_mb1cf 0x44 /* memory bank 1 configuration */ +#define SDRAM0_CFG 0x20 /* memory controller options 1 */ +#define SDRAM0_STATUS 0x24 /* memory status */ +#define SDRAM0_RTR 0x30 /* refresh timer reg */ +#define SDRAM0_PMIT 0x34 /* power management idle timer */ +#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */ +#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */ #ifndef CONFIG_405EP -#define mem_mb2cf 0x48 /* memory bank 2 configuration */ -#define mem_mb3cf 0x4c /* memory bank 3 configuration */ +#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */ +#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */ #endif -#define mem_sdtr1 0x80 /* timing reg 1 */ +#define SDRAM0_TR 0x80 /* timing reg 1 */ #ifndef CONFIG_405EP -#define mem_ecccf 0x94 /* ECC configuration */ -#define mem_eccerr 0x98 /* ECC error status */ +#define SDRAM0_ECCCFG 0x94 /* ECC configuration */ +#define SDRAM0_ECCESR 0x98 /* ECC error status */ #endif #endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */ @@ -68,36 +63,25 @@ #define SDRAM_CFG0 0x20 /* memory controller options 0 */ #define SDRAM_CFG1 0x21 /* memory controller options 1 */ -/* - * XXX - ToDo: Revisit file to change all these lower case defines into - * upper case. Also needs to be done in the controller setup code too - * of course. sr, 2008-06-02 - */ -#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */ -#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */ -#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */ -#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */ -#define mem_bear 0x0010 /* bus error address reg */ -#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */ -#define mem_mirq_set 0x0012 /* bus master interrupt (set) */ -#define mem_slio 0x0018 /* ddr sdram slave interface options */ -#define mem_cfg0 0x0020 /* ddr sdram options 0 */ -#define mem_cfg1 0x0021 /* ddr sdram options 1 */ -#define mem_devopt 0x0022 /* ddr sdram device options */ -#define mem_mcsts 0x0024 /* memory controller status */ -#define mem_rtr 0x0030 /* refresh timer register */ -#define mem_pmit 0x0034 /* power management idle timer */ -#define mem_uabba 0x0038 /* plb UABus base address */ -#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */ -#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */ -#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */ -#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */ -#define mem_tr0 0x0080 /* sdram timing register 0 */ -#define mem_tr1 0x0081 /* sdram timing register 1 */ -#define mem_clktr 0x0082 /* ddr clock timing register */ -#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */ -#define mem_dlycal 0x0084 /* delay line calibration register */ -#define mem_eccesr 0x0098 /* ECC error status */ +#define SDRAM0_BEAR 0x0010 /* bus error address reg */ +#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */ +#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */ +#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */ +#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */ +#define SDRAM0_MCSTS 0x0024 /* memory controller status */ +#define SDRAM0_RTR 0x0030 /* refresh timer register */ +#define SDRAM0_PMIT 0x0034 /* power management idle timer */ +#define SDRAM0_UABBA 0x0038 /* plb UABus base address */ +#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */ +#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */ +#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */ +#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */ +#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */ +#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */ +#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */ +#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */ +#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */ +#define SDRAM0_ECCESR 0x0098 /* ECC error status */ /* * Memory Controller Options 0 diff --git a/include/asm-ppc/ppc4xx-uic.h b/include/asm-ppc/ppc4xx-uic.h index c908d4245..782d0454b 100644 --- a/include/asm-ppc/ppc4xx-uic.h +++ b/include/asm-ppc/ppc4xx-uic.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> * - * (C) Copyright 2008 + * (C) Copyright 2008-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -43,7 +43,7 @@ #define UIC_MAX 1 #endif -#define IRQ_MAX UIC_MAX * 32 +#define IRQ_MAX (UIC_MAX * 32) /* * UIC register @@ -74,53 +74,41 @@ #define UIC3_DCR_BASE 0xf0 #endif -#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */ -#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */ -#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */ -#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */ -#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */ -#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */ -#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */ -#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */ +#define UIC0SR (UIC0_DCR_BASE+0x0) /* UIC0 status */ +#define UIC0ER (UIC0_DCR_BASE+0x2) /* UIC0 enable */ +#define UIC0CR (UIC0_DCR_BASE+0x3) /* UIC0 critical */ +#define UIC0PR (UIC0_DCR_BASE+0x4) /* UIC0 polarity */ +#define UIC0TR (UIC0_DCR_BASE+0x5) /* UIC0 triggering */ +#define UIC0MSR (UIC0_DCR_BASE+0x6) /* UIC0 masked status */ +#define UIC0VR (UIC0_DCR_BASE+0x7) /* UIC0 vector */ +#define UIC0VCR (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */ -#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */ -#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */ -#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */ -#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */ -#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */ -#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */ -#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ -#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ +#define UIC1SR (UIC1_DCR_BASE+0x0) /* UIC1 status */ +#define UIC1ER (UIC1_DCR_BASE+0x2) /* UIC1 enable */ +#define UIC1CR (UIC1_DCR_BASE+0x3) /* UIC1 critical */ +#define UIC1PR (UIC1_DCR_BASE+0x4) /* UIC1 polarity */ +#define UIC1TR (UIC1_DCR_BASE+0x5) /* UIC1 triggering */ +#define UIC1MSR (UIC1_DCR_BASE+0x6) /* UIC1 masked status */ +#define UIC1VR (UIC1_DCR_BASE+0x7) /* UIC1 vector */ +#define UIC1VCR (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ -#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ -#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ -#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ -#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ -#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ -#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ -#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ -#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ -#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ +#define UIC2SR (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +#define UIC2ER (UIC2_DCR_BASE+0x2) /* UIC2 enable */ +#define UIC2CR (UIC2_DCR_BASE+0x3) /* UIC2 critical */ +#define UIC2PR (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ +#define UIC2TR (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ +#define UIC2MSR (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ +#define UIC2VR (UIC2_DCR_BASE+0x7) /* UIC2 vector */ +#define UIC2VCR (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ -#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ -#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */ -#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */ -#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */ -#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ -#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ -#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ -#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */ -#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ - -/* The following is for compatibility with 405 code */ -#define uicsr uic0sr -#define uicer uic0er -#define uiccr uic0cr -#define uicpr uic0pr -#define uictr uic0tr -#define uicmsr uic0msr -#define uicvr uic0vr -#define uicvcr uic0vcr +#define UIC3SR (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +#define UIC3ER (UIC3_DCR_BASE+0x2) /* UIC3 enable */ +#define UIC3CR (UIC3_DCR_BASE+0x3) /* UIC3 critical */ +#define UIC3PR (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ +#define UIC3TR (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ +#define UIC3MSR (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ +#define UIC3VR (UIC3_DCR_BASE+0x7) /* UIC3 vector */ +#define UIC3VCR (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ /* * Now the interrupt vector definitions. They are different for most of diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 76b78942b..5927e7639 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -216,7 +216,8 @@ /* * Local Bus LCRR and LBCR regs */ -#define CONFIG_SYS_LCRR LCRR_EADC_1 | LCRR_CLKDIV_4 +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR ( 0x00040000 /* TODO */ \ | (0xFF << LBCR_BMT_SHIFT) \ | 0xF ) /* 0x0004ff0f */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 84cc9fa41..8eaff5d06 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -182,7 +182,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00040000 /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index c40d3d3f4..356586c42 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -170,7 +170,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index f16616c0d..f17f9c7c3 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -159,7 +159,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 9b2d25a01..6361c4595 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -206,7 +206,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 3b4e3449b..eaa59fde4 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -317,7 +317,8 @@ boards, we say we have two, but don't display a message if we find only one. */ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index b072e8447..852015512 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -185,7 +185,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* @@ -382,6 +383,8 @@ #define CONFIG_NET_MULTI 1 #endif +#define CONFIG_HWCONFIG 1 + /* * QE UEC ethernet configuration */ @@ -397,7 +400,7 @@ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII +#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID #endif #define CONFIG_UEC_ETH2 /* GETH2 */ @@ -408,7 +411,7 @@ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK4 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII +#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID #endif /* diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index cb0535c15..6cee78aa2 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -177,7 +177,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index a190a50ed..abeb6a2c6 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -220,7 +220,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 89fafe7d2..7ef92f7be 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -243,7 +243,8 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 983556783..f8b016fee 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -137,7 +137,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB sdram refresh timer, about 6us */ diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 866ff179e..f68d83417 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -111,7 +111,9 @@ /* * Local Bus LCRR and LBCR regs */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 #define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \ | (0xFF << LBCR_BMT_SHIFT) \ | 0xF ) /* 0x0004ff0f */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index da08b7c21..4c909e61a 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -52,7 +52,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 /* board pre init: do not call, nothing to do */ #undef CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 79d8638fe..bec08dab1 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -170,7 +170,9 @@ /* * Local Bus Configuration & Clock Setup */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_2 | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 /* * Init Local Bus Memory Controller: diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index e961bb392..bf7cf82d8 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -32,6 +32,21 @@ #define __CONFIG_H /* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_MK_PCI +#define CONFIG_PCI +#endif + +#ifdef CONFIG_MK_66 +#define PCI_66M +#endif + +#ifdef CONFIG_MK_33 +#define PCI_33M +#endif + +/* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ @@ -182,7 +197,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 5304ec94a..d0690feb1 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -178,7 +178,8 @@ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c index df03afe0a..9fec5cad3 100644 --- a/nand_spl/board/amcc/bamboo/sdram.c +++ b/nand_spl/board/amcc/bamboo/sdram.c @@ -31,7 +31,7 @@ static void wait_init_complete(void) u32 val; do { - mfsdram(mem_mcsts, val); + mfsdram(SDRAM0_MCSTS, val); } while (!(val & 0x80000000)); } @@ -62,30 +62,30 @@ phys_size_t initdram(int board_type) /* * Disable memory controller. */ - mtsdram(mem_cfg0, 0x00000000); + mtsdram(SDRAM0_CFG0, 0x00000000); /* * Setup some default */ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram(mem_b0cr, 0x00082001); - mtsdram(mem_tr0, 0x41094012); - mtsdram(mem_tr1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ - mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ + mtsdram(SDRAM0_B0CR, 0x00082001); + mtsdram(SDRAM0_TR0, 0x41094012); + mtsdram(SDRAM0_TR1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ + mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ + mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/ /* * Enable the controller, then wait for DCEN to complete */ - mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/ + mtsdram(SDRAM0_CFG0, 0x80000000); /* DCEN=1, PMUD=0*/ wait_init_complete(); return CONFIG_SYS_MBYTES_SDRAM << 20; |