diff options
54 files changed, 1058 insertions, 343 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 620604c18..85ba8d28d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -616,6 +616,10 @@ David Müller <d.mueller@elsoft.ch> smdk2410 ARM920T VCMA9 ARM920T +Eric Millbrandt <emillbrandt@dekaresearch.com> + + galaxy5200 mpc5200 + Rolf Offermanns <rof@sysgo.de> shannon SA1100 @@ -50,6 +50,7 @@ LIST_5xxx=" \ digsy_mtc \ EVAL5200 \ fo300 \ + galaxy5200 \ icecube_5100 \ icecube_5200 \ inka4x0 \ @@ -544,6 +544,12 @@ digsy_mtc_RAMBOOT_config: unconfig } @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc +galaxy5200_LOWBOOT_config \ +galaxy5200_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h + @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200 + hmi1001_config: unconfig @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 @@ -629,6 +629,8 @@ The following options need to be configured: CONFIG_CMD_KGDB * kgdb CONFIG_CMD_LOADB loadb CONFIG_CMD_LOADS loads + CONFIG_CMD_MD5SUM print md5 message digest + (requires CONFIG_CMD_MEMORY and CONFIG_MD5) CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, loop, loopw, mtest CONFIG_CMD_MISC Misc functions like sleep etc @@ -652,6 +654,8 @@ The following options need to be configured: (requires CONFIG_CMD_I2C) CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) + CONFIG_CMD_SHA1 print sha1 memory digest + (requires CONFIG_CMD_MEMORY) CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_USB * USB support @@ -854,9 +858,13 @@ The following options need to be configured: MPC5200 USB requires additional defines: CONFIG_USB_CLOCK for 528 MHz Clock: 0x0001bbbb + CONFIG_PSC3_USB + for USB on PSC3 CONFIG_USB_CONFIG for differential drivers: 0x00001000 for single ended drivers: 0x00005000 + for differential drivers on PSC3: 0x00000100 + for single ended drivers on PSC3: 0x00004100 CONFIG_SYS_USB_EVENT_POLL May be defined to allow interrupt polling instead of using asynchronous interrupts diff --git a/board/galaxy5200/Makefile b/board/galaxy5200/Makefile new file mode 100644 index 000000000..22ce8e64f --- /dev/null +++ b/board/galaxy5200/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/galaxy5200/config.mk b/board/galaxy5200/config.mk new file mode 100644 index 000000000..c6398b26e --- /dev/null +++ b/board/galaxy5200/config.mk @@ -0,0 +1,45 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# galaxy5200 board: +# +# Valid values for TEXT_BASE are: +# +# 0xFFF00000 boot high (standard configuration) +# 0xFE000000 boot low +# 0x00100000 boot from RAM (for testing only) does not work +# + +sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp + +ifdef CONFIG_galaxy5200_LOWBOOT +TEXT_BASE = 0xFE000000 +endif + +ifndef TEXT_BASE +## Standard: boot high +TEXT_BASE = 0xFFF00000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/galaxy5200/galaxy5200.c b/board/galaxy5200/galaxy5200.c new file mode 100644 index 000000000..5aa9d3a6f --- /dev/null +++ b/board/galaxy5200/galaxy5200.c @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2006 + * Eric Schumann, Phytec Messtechnik GmbH + * + * (C) Copyright 2009 + * Eric Millbrandt, DEKA Research and Development Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <asm-ppc/io.h> + +#ifndef CONFIG_SYS_RAMBOOT +static void sdram_start(int hi_addr) +{ + volatile struct mpc5xxx_cdm *cdm = + (struct mpc5xxx_cdm *)MPC5XXX_CDM; + volatile struct mpc5xxx_sdram *sdram = + (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + out_be32 (&sdram->ctrl, + (SDRAM_CONTROL | 0x80000000 | hi_addr_bit)); + + /* precharge all banks */ + out_be32 (&sdram->ctrl, + (SDRAM_CONTROL | 0x80000002 | hi_addr_bit)); + +#ifdef SDRAM_DDR + /* set mode register: extended mode */ + out_be32 (&sdram->mode, (SDRAM_EMODE)); + + /* set mode register: reset DLL */ + out_be32 (&sdram->mode, (SDRAM_MODE | 0x04000000)); +#endif + + /* precharge all banks */ + out_be32 (&sdram->ctrl, + (SDRAM_CONTROL | 0x80000002 | hi_addr_bit)); + + /* auto refresh */ + out_be32 (&sdram->ctrl, + (SDRAM_CONTROL | 0x80000004 | hi_addr_bit)); + + /* set mode register */ + out_be32 (&sdram->mode, (SDRAM_MODE)); + + /* normal operation */ + out_be32 (&sdram->ctrl, + (SDRAM_CONTROL | hi_addr_bit)); + + /* set CDM clock enable register, set MPC5200B SDRAM bus */ + /* to reduced driver strength */ + out_be32 (&cdm->clock_enable, (0x00CFFFFF)); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make + * real use of CONFIG_SYS_SDRAM_BASE. The code does not + * work if CONFIG_SYS_SDRAM_BASE + * is something else than 0x00000000. + */ + +phys_size_t initdram(int board_type) +{ + volatile struct mpc5xxx_mmap_ctl *mm = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + volatile struct mpc5xxx_sdram *sdram = + (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + ulong dramsize = 0; + ulong dramsize2 = 0; +#ifndef CONFIG_SYS_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + /* 256MB at 0x0 */ + out_be32 (&mm->sdram0, 0x0000001b); + /* disabled */ + out_be32 (&mm->sdram1, 0x10000000); + + /* setup config registers */ + out_be32 (&sdram->config1, SDRAM_CONFIG1); + out_be32 (&sdram->config2, SDRAM_CONFIG2); + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000); + sdram_start(1); + test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else + dramsize = test2; + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + out_be32 (&mm->sdram0, + (0x13 + __builtin_ffs(dramsize >> 20) - 1)); + } else { + /* disabled */ + out_be32 (&mm->sdram0, 0); + } + +#else /* CONFIG_SYS_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = in_be32(&mm->sdram0) & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = in_be32(&mm->sdram1) & 0xFF; + if (dramsize2 >= 0x13) + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + else + dramsize2 = 0; + +#endif /* CONFIG_SYS_RAMBOOT */ + + return dramsize + dramsize2; +} + +int checkboard(void) +{ + puts("Board: galaxy5200\n"); + return 0; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t * bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) + +void init_ide_reset (void) +{ + volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT; + debug ("init_ide_reset\n"); + + /* Configure TIMER_5 as GPIO output for ATA reset */ + /* Deassert reset */ + gpt[5].emsr = MPC5XXX_GPT_GPIO_OUT1 | MPC5XXX_GPT_TMS_GPIO; +} + +void ide_set_reset (int idereset) +{ + volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT; + debug ("ide_reset(%d)\n", idereset); + + /* Configure TIMER_5 as GPIO output for ATA reset */ + if (idereset) { + gpt[5].emsr = MPC5XXX_GPT_GPIO_OUT0 | MPC5XXX_GPT_TMS_GPIO; + + /* Make a delay. MPC5200 spec says 25 usec min */ + udelay(50); + } else { + gpt[5].emsr = MPC5XXX_GPT_GPIO_OUT1 | MPC5XXX_GPT_TMS_GPIO; + udelay(50); + } +} +#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */ diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c index 26edb2e4f..10759b79c 100644 --- a/board/rsdproto/rsdproto.c +++ b/board/rsdproto/rsdproto.c @@ -26,6 +26,7 @@ #include <ioports.h> #include <mpc8260.h> #include <i2c.h> +#include <bcd.h> /* define to initialise the SDRAM on the local bus */ #undef INIT_LOCAL_BUS_SDRAM @@ -208,16 +209,14 @@ void read_RS5C372_time (struct tm *timedate) { unsigned char buffer[8]; -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) - if (! i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) { - timedate->tm_sec = BCD_TO_BIN (buffer[0]); - timedate->tm_min = BCD_TO_BIN (buffer[1]); - timedate->tm_hour = BCD_TO_BIN (buffer[2]); - timedate->tm_wday = BCD_TO_BIN (buffer[3]); - timedate->tm_mday = BCD_TO_BIN (buffer[4]); - timedate->tm_mon = BCD_TO_BIN (buffer[5]); - timedate->tm_year = BCD_TO_BIN (buffer[6]) + 2000; + timedate->tm_sec = bcd2bin (buffer[0]); + timedate->tm_min = bcd2bin (buffer[1]); + timedate->tm_hour = bcd2bin (buffer[2]); + timedate->tm_wday = bcd2bin (buffer[3]); + timedate->tm_mday = bcd2bin (buffer[4]); + timedate->tm_mon = bcd2bin (buffer[5]); + timedate->tm_year = bcd2bin (buffer[6]) + 2000; } else { /*printf("i2c error %02x\n", rc); */ memset (timedate, 0, sizeof (struct tm)); diff --git a/common/cmd_mem.c b/common/cmd_mem.c index cdf8c798d..98508003b 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -34,6 +34,9 @@ #endif #include <watchdog.h> +#include <u-boot/md5.h> +#include <sha1.h> + #ifdef CMD_MEM_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) #else @@ -1141,6 +1144,55 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #endif /* CONFIG_CRC32_VERIFY */ +#ifdef CONFIG_CMD_MD5SUM +int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned long addr, len; + unsigned int i; + u8 output[16]; + + if (argc < 3) { + cmd_usage(cmdtp); + return 1; + } + + addr = simple_strtoul(argv[1], NULL, 16); + len = simple_strtoul(argv[2], NULL, 16); + + md5((unsigned char *) addr, len, output); + printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1); + for (i = 0; i < 16; i++) + printf("%02x", output[i]); + printf("\n"); + + return 0; +} +#endif + +#ifdef CONFIG_CMD_SHA1 +int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned long addr, len; + unsigned int i; + u8 output[20]; + + if (argc < 3) { + cmd_usage(cmdtp); + return 1; + } + + addr = simple_strtoul(argv[1], NULL, 16); + len = simple_strtoul(argv[2], NULL, 16); + + sha1_csum((unsigned char *) addr, len, output); + printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1); + for (i = 0; i < 20; i++) + printf("%02x", output[i]); + printf("\n"); + + return 0; +} +#endif #ifdef CONFIG_CMD_UNZIP int gunzip (void *, int, unsigned char *, unsigned long *); @@ -1267,6 +1319,22 @@ U_BOOT_CMD( ); #endif /* CONFIG_MX_CYCLIC */ +#ifdef CONFIG_CMD_MD5SUM +U_BOOT_CMD( + md5sum, 3, 1, do_md5sum, + "compute MD5 message digest", + "address count" +); +#endif + +#ifdef CONFIG_CMD_SHA1SUM +U_BOOT_CMD( + sha1sum, 3, 1, do_sha1sum, + "compute SHA1 message digest", + "address count" +); +#endif /* CONFIG_CMD_SHA1 */ + #ifdef CONFIG_CMD_UNZIP U_BOOT_CMD( unzip, 4, 1, do_unzip, diff --git a/cpu/mpc5xxx/usb.c b/cpu/mpc5xxx/usb.c index 8f2b66a51..bec7da3ea 100644 --- a/cpu/mpc5xxx/usb.c +++ b/cpu/mpc5xxx/usb.c @@ -32,9 +32,13 @@ int usb_cpu_init(void) /* Set the USB Clock */ *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK; +#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */ + /* remove all PSC3 USB bits first before ORing in ours */ + *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00; +#else /* remove all USB bits first before ORing in ours */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000; - +#endif /* Activate USB port */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG; diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c index 61a4e3fb6..66a4af8d8 100644 --- a/cpu/mpc5xxx/usb_ohci.c +++ b/cpu/mpc5xxx/usb_ohci.c @@ -1576,9 +1576,13 @@ int usb_lowlevel_init(void) /* Set the USB Clock */ *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK; +#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */ + /* remove all PSC3 USB bits first before ORing in ours */ + *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00; +#else /* remove all USB bits first before ORing in ours */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000; - +#endif /* Activate USB port */ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG; diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 822dc1a0e..ea7d899ea 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_RTC_ISL1208) += isl1208.o COBJS-$(CONFIG_RTC_M41T11) += m41t11.o COBJS-$(CONFIG_RTC_M41T60) += m41t60.o COBJS-$(CONFIG_RTC_M41T62) += m41t62.o +COBJS-$(CONFIG_RTC_M41T94) += m41t94.o COBJS-$(CONFIG_RTC_M48T35A) += m48t35ax.o COBJS-$(CONFIG_RTC_MAX6900) += max6900.o COBJS-$(CONFIG_RTC_MC13783) += mc13783-rtc.o diff --git a/drivers/rtc/ds12887.c b/drivers/rtc/ds12887.c index 25ca1333e..486105f5e 100644 --- a/drivers/rtc/ds12887.c +++ b/drivers/rtc/ds12887.c @@ -76,18 +76,6 @@ static void rtc_write (uchar reg, uchar val) # error Board specific rtc access functions should be supplied #endif -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - -/* ------------------------------------------------------------------------- */ - int rtc_get (struct rtc_time *tmp) { uchar sec, min, hour, mday, wday, mon, year; diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c index 75f88a9a5..288c5f8c4 100644 --- a/drivers/rtc/ds1306.c +++ b/drivers/rtc/ds1306.c @@ -62,9 +62,6 @@ #define RTC_USER_RAM_BASE 0x20 -static unsigned int bin2bcd (unsigned int n); -static unsigned char bcd2bin (unsigned char c); - /* ************************************************************************* */ #ifdef CONFIG_SXNI855T /* !!! SHOULD BE CHANGED TO NEW CODE !!! */ @@ -459,19 +456,4 @@ static void rtc_write (unsigned char reg, unsigned char val) #endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */ -/* ------------------------------------------------------------------------- */ - -static unsigned char bcd2bin (unsigned char n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -/* ------------------------------------------------------------------------- */ - -static unsigned int bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} -/* ------------------------------------------------------------------------- */ - #endif diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c index 0650d915a..079aa99e8 100644 --- a/drivers/rtc/ds1307.c +++ b/drivers/rtc/ds1307.c @@ -76,8 +76,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin (uchar c); /* * Get the current time from the RTC @@ -195,15 +193,4 @@ static void rtc_write (uchar reg, uchar val) { i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } - -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c index 58e3966ec..a71ab5daa 100644 --- a/drivers/rtc/ds1337.c +++ b/drivers/rtc/ds1337.c @@ -77,9 +77,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin (uchar c); - /* * Get the current time from the RTC @@ -191,14 +188,4 @@ static void rtc_write (uchar reg, uchar val) i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/ds1556.c b/drivers/rtc/ds1556.c index 763d22a03..25a0b6493 100644 --- a/drivers/rtc/ds1556.c +++ b/drivers/rtc/ds1556.c @@ -40,8 +40,6 @@ static uchar rtc_read( unsigned int addr ); static void rtc_write( unsigned int addr, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin(uchar c); #define RTC_BASE ( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR ) @@ -195,14 +193,4 @@ static void rtc_write( unsigned int addr, uchar val ) *(volatile unsigned char*)(addr) = val; } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/ds164x.c b/drivers/rtc/ds164x.c index 1e96679de..9f306d196 100644 --- a/drivers/rtc/ds164x.c +++ b/drivers/rtc/ds164x.c @@ -41,8 +41,6 @@ static uchar rtc_read(unsigned int addr ); static void rtc_write(unsigned int addr, uchar val); -static uchar bin2bcd(unsigned int n); -static unsigned bcd2bin(uchar c); #define RTC_EPOCH 2000 /* century */ @@ -191,14 +189,4 @@ static void rtc_write( unsigned int addr, uchar val ) *(volatile unsigned char*)(addr) = val; } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/ds174x.c b/drivers/rtc/ds174x.c index 738d1185c..5a55dc8b7 100644 --- a/drivers/rtc/ds174x.c +++ b/drivers/rtc/ds174x.c @@ -37,8 +37,6 @@ static uchar rtc_read( unsigned int addr ); static void rtc_write( unsigned int addr, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin(uchar c); #define RTC_BASE ( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR ) @@ -192,14 +190,4 @@ static void rtc_write( unsigned int addr, uchar val ) out8( addr, val ); } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c index ef033588a..134a0e4fc 100644 --- a/drivers/rtc/ds3231.c +++ b/drivers/rtc/ds3231.c @@ -79,8 +79,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin (uchar c); /* @@ -186,14 +184,4 @@ static void rtc_write (uchar reg, uchar val) i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/isl1208.c b/drivers/rtc/isl1208.c index 71f63d5fa..07591b7db 100644 --- a/drivers/rtc/isl1208.c +++ b/drivers/rtc/isl1208.c @@ -66,8 +66,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin (uchar c); /* * Get the current time from the RTC @@ -160,13 +158,3 @@ static void rtc_write (uchar reg, uchar val) { i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } - -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} diff --git a/drivers/rtc/m41t11.c b/drivers/rtc/m41t11.c index 3a77c1b63..e0c27e185 100644 --- a/drivers/rtc/m41t11.c +++ b/drivers/rtc/m41t11.c @@ -45,17 +45,6 @@ #if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE) -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - - /* ------------------------------------------------------------------------- */ /* these are simple defines for the chip local to here so they aren't too diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c index e34a5f478..632fe4b14 100644 --- a/drivers/rtc/m41t60.c +++ b/drivers/rtc/m41t60.c @@ -36,16 +36,6 @@ #if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE) -static unsigned bcd2bin(uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd(unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - /* * Convert between century and "century bits" (CB1 and CB0). These routines * assume years are in the range 1900 - 2299. diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c index cfe84f926..62c244693 100644 --- a/drivers/rtc/m41t62.c +++ b/drivers/rtc/m41t62.c @@ -31,7 +31,6 @@ #include <command.h> #include <rtc.h> #include <i2c.h> -#include <bcd.h> #if defined(CONFIG_CMD_DATE) @@ -76,16 +75,16 @@ int rtc_get(struct rtc_time *tm) buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); - tm->tm_sec = BCD2BIN(buf[M41T62_REG_SEC] & 0x7f); - tm->tm_min = BCD2BIN(buf[M41T62_REG_MIN] & 0x7f); - tm->tm_hour = BCD2BIN(buf[M41T62_REG_HOUR] & 0x3f); - tm->tm_mday = BCD2BIN(buf[M41T62_REG_DAY] & 0x3f); + tm->tm_sec = bcd2bin(buf[M41T62_REG_SEC] & 0x7f); + tm->tm_min = bcd2bin(buf[M41T62_REG_MIN] & 0x7f); + tm->tm_hour = bcd2bin(buf[M41T62_REG_HOUR] & 0x3f); + tm->tm_mday = bcd2bin(buf[M41T62_REG_DAY] & 0x3f); tm->tm_wday = buf[M41T62_REG_WDAY] & 0x07; - tm->tm_mon = BCD2BIN(buf[M41T62_REG_MON] & 0x1f); + tm->tm_mon = bcd2bin(buf[M41T62_REG_MON] & 0x1f); /* assume 20YY not 19YY, and ignore the Century Bit */ /* U-Boot needs to add 1900 here */ - tm->tm_year = BCD2BIN(buf[M41T62_REG_YEAR]) + 100 + 1900; + tm->tm_year = bcd2bin(buf[M41T62_REG_YEAR]) + 100 + 1900; debug("%s: tm is secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", @@ -109,19 +108,19 @@ int rtc_set(struct rtc_time *tm) /* Merge time-data and register flags into buf[0..7] */ buf[M41T62_REG_SSEC] = 0; buf[M41T62_REG_SEC] = - BIN2BCD(tm->tm_sec) | (buf[M41T62_REG_SEC] & ~0x7f); + bin2bcd(tm->tm_sec) | (buf[M41T62_REG_SEC] & ~0x7f); buf[M41T62_REG_MIN] = - BIN2BCD(tm->tm_min) | (buf[M41T62_REG_MIN] & ~0x7f); + bin2bcd(tm->tm_min) | (buf[M41T62_REG_MIN] & ~0x7f); buf[M41T62_REG_HOUR] = - BIN2BCD(tm->tm_hour) | (buf[M41T62_REG_HOUR] & ~0x3f) ; + bin2bcd(tm->tm_hour) | (buf[M41T62_REG_HOUR] & ~0x3f) ; buf[M41T62_REG_WDAY] = (tm->tm_wday & 0x07) | (buf[M41T62_REG_WDAY] & ~0x07); buf[M41T62_REG_DAY] = - BIN2BCD(tm->tm_mday) | (buf[M41T62_REG_DAY] & ~0x3f); + bin2bcd(tm->tm_mday) | (buf[M41T62_REG_DAY] & ~0x3f); buf[M41T62_REG_MON] = - BIN2BCD(tm->tm_mon) | (buf[M41T62_REG_MON] & ~0x1f); + bin2bcd(tm->tm_mon) | (buf[M41T62_REG_MON] & ~0x1f); /* assume 20YY not 19YY */ - buf[M41T62_REG_YEAR] = BIN2BCD(tm->tm_year % 100); + buf[M41T62_REG_YEAR] = bin2bcd(tm->tm_year % 100); if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) { printf("I2C write failed in %s()\n", __func__); diff --git a/drivers/rtc/m41t94.c b/drivers/rtc/m41t94.c new file mode 100644 index 000000000..02b41d91b --- /dev/null +++ b/drivers/rtc/m41t94.c @@ -0,0 +1,124 @@ +/* + * Driver for ST M41T94 SPI RTC + * + * Taken from the Linux kernel drivier: + * Copyright (C) 2008 Kim B. Heino + * + * Adaptation for U-Boot: + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> +#include <rtc.h> +#include <spi.h> + +static struct spi_slave *slave; + +#define M41T94_REG_SECONDS 0x01 +#define M41T94_REG_MINUTES 0x02 +#define M41T94_REG_HOURS 0x03 +#define M41T94_REG_WDAY 0x04 +#define M41T94_REG_DAY 0x05 +#define M41T94_REG_MONTH 0x06 +#define M41T94_REG_YEAR 0x07 +#define M41T94_REG_HT 0x0c + +#define M41T94_BIT_HALT 0x40 +#define M41T94_BIT_STOP 0x80 +#define M41T94_BIT_CB 0x40 +#define M41T94_BIT_CEB 0x80 + +int rtc_set(struct rtc_time *tm) +{ + u8 buf[8]; /* write cmd + 7 registers */ + int ret; + + if (!slave) { + slave = spi_setup_slave(CONFIG_M41T94_SPI_BUS, + CONFIG_M41T94_SPI_CS, 1000000, + SPI_MODE_3); + if (!slave) + return -1; + } + spi_claim_bus(slave); + + buf[0] = 0x80 | M41T94_REG_SECONDS; /* write time + date */ + buf[M41T94_REG_SECONDS] = bin2bcd(tm->tm_sec); + buf[M41T94_REG_MINUTES] = bin2bcd(tm->tm_min); + buf[M41T94_REG_HOURS] = bin2bcd(tm->tm_hour); + buf[M41T94_REG_WDAY] = bin2bcd(tm->tm_wday + 1); + buf[M41T94_REG_DAY] = bin2bcd(tm->tm_mday); + buf[M41T94_REG_MONTH] = bin2bcd(tm->tm_mon + 1); + + buf[M41T94_REG_HOURS] |= M41T94_BIT_CEB; + if (tm->tm_year >= 100) + buf[M41T94_REG_HOURS] |= M41T94_BIT_CB; + buf[M41T94_REG_YEAR] = bin2bcd(tm->tm_year % 100); + + ret = spi_xfer(slave, 64, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END); + spi_release_bus(slave); + return ret; +} + +int rtc_get(struct rtc_time *tm) +{ + u8 buf[2]; + int ret, hour; + + if (!slave) { + slave = spi_setup_slave(CONFIG_M41T94_SPI_BUS, + CONFIG_M41T94_SPI_CS, 1000000, + SPI_MODE_3); + if (!slave) + return -1; + } + spi_claim_bus(slave); + + /* clear halt update bit */ + ret = spi_w8r8(slave, M41T94_REG_HT); + if (ret < 0) + return ret; + if (ret & M41T94_BIT_HALT) { + buf[0] = 0x80 | M41T94_REG_HT; + buf[1] = ret & ~M41T94_BIT_HALT; + spi_xfer(slave, 16, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END); + } + + /* clear stop bit */ + ret = spi_w8r8(slave, M41T94_REG_SECONDS); + if (ret < 0) + return ret; + if (ret & M41T94_BIT_STOP) { + buf[0] = 0x80 | M41T94_REG_SECONDS; + buf[1] = ret & ~M41T94_BIT_STOP; + spi_xfer(slave, 16, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END); + } + + tm->tm_sec = bcd2bin(spi_w8r8(slave, M41T94_REG_SECONDS)); + tm->tm_min = bcd2bin(spi_w8r8(slave, M41T94_REG_MINUTES)); + hour = spi_w8r8(slave, M41T94_REG_HOURS); + tm->tm_hour = bcd2bin(hour & 0x3f); + tm->tm_wday = bcd2bin(spi_w8r8(slave, M41T94_REG_WDAY)) - 1; + tm->tm_mday = bcd2bin(spi_w8r8(slave, M41T94_REG_DAY)); + tm->tm_mon = bcd2bin(spi_w8r8(slave, M41T94_REG_MONTH)) - 1; + tm->tm_year = bcd2bin(spi_w8r8(slave, M41T94_REG_YEAR)); + if ((hour & M41T94_BIT_CB) || !(hour & M41T94_BIT_CEB)) + tm->tm_year += 100; + + spi_release_bus(slave); + return 0; +} + +void rtc_reset(void) +{ + /* + * Could not be tested as the reset pin is not wired on + * the sbc35-ag20 board + */ + return 0; +} diff --git a/drivers/rtc/m48t35ax.c b/drivers/rtc/m48t35ax.c index 1482edd60..29b36c171 100644 --- a/drivers/rtc/m48t35ax.c +++ b/drivers/rtc/m48t35ax.c @@ -37,8 +37,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin(uchar c); /* ------------------------------------------------------------------------- */ @@ -157,14 +155,4 @@ static void rtc_write (uchar reg, uchar val) ((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val; } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c index 7c99c5e5b..74637d198 100644 --- a/drivers/rtc/max6900.c +++ b/drivers/rtc/max6900.c @@ -51,16 +51,6 @@ static void rtc_write (uchar reg, uchar val) udelay(2500); } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - /* ------------------------------------------------------------------------- */ int rtc_get (struct rtc_time *tmp) diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c index 38484ce26..d68b438ef 100644 --- a/drivers/rtc/mc146818.c +++ b/drivers/rtc/mc146818.c @@ -35,8 +35,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin(uchar c); #define RTC_PORT_MC146818 CONFIG_SYS_ISA_IO_BASE_ADDRESS + 0x70 #define RTC_SECONDS 0x00 @@ -168,14 +166,4 @@ static void rtc_write (uchar reg, uchar val) } #endif -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c index dabf3222b..b17688211 100644 --- a/drivers/rtc/mk48t59.c +++ b/drivers/rtc/mk48t59.c @@ -97,16 +97,6 @@ static void rtc_write (short reg, uchar val) # error Board specific rtc access functions should be supplied #endif -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - /* ------------------------------------------------------------------------- */ void *nvram_read(void *dest, const short src, size_t count) diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c index cd9fb65c3..339e5f608 100644 --- a/drivers/rtc/pcf8563.c +++ b/drivers/rtc/pcf8563.c @@ -36,8 +36,6 @@ static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin(uchar c); /* ------------------------------------------------------------------------- */ @@ -137,14 +135,4 @@ static void rtc_write (uchar reg, uchar val) i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c index d6cd7c825..90bbb4efa 100644 --- a/drivers/rtc/rs5c372.c +++ b/drivers/rtc/rs5c372.c @@ -67,9 +67,6 @@ static unsigned int rtc_debug = DEBUG; #define HOURS_24(n) bcd2bin((n) & 0x3F) -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin (uchar c); - static int setup_done = 0; static int @@ -291,15 +288,4 @@ rtc_reset (void) return; } -static unsigned int -bcd2bin (unsigned char n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char -bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} #endif diff --git a/drivers/rtc/rtc4543.c b/drivers/rtc/rtc4543.c index 242d9bcad..046aa67d9 100644 --- a/drivers/rtc/rtc4543.c +++ b/drivers/rtc/rtc4543.c @@ -25,7 +25,6 @@ #include <common.h> #include <command.h> #include <config.h> -#include <bcd.h> #include <rtc.h> #include <tws.h> @@ -49,13 +48,13 @@ int rtc_get(struct rtc_time *tm) /* Read 52 bits into our buffer */ tws_read(buffer, 52); - tm->tm_sec = BCD2BIN( buffer[0] & 0x7F); - tm->tm_min = BCD2BIN( buffer[1] & 0x7F); - tm->tm_hour = BCD2BIN( buffer[2] & 0x3F); - tm->tm_wday = BCD2BIN( buffer[3] & 0x07); - tm->tm_mday = BCD2BIN((buffer[3] & 0xF0) >> 4 | (buffer[4] & 0x0F) << 4); - tm->tm_mon = BCD2BIN((buffer[4] & 0x30) >> 4 | (buffer[5] & 0x0F) << 4); - tm->tm_year = BCD2BIN((buffer[5] & 0xF0) >> 4 | (buffer[6] & 0x0F) << 4) + 2000; + tm->tm_sec = bcd2bin( buffer[0] & 0x7F); + tm->tm_min = bcd2bin( buffer[1] & 0x7F); + tm->tm_hour = bcd2bin( buffer[2] & 0x3F); + tm->tm_wday = bcd2bin( buffer[3] & 0x07); + tm->tm_mday = bcd2bin((buffer[3] & 0xF0) >> 4 | (buffer[4] & 0x0F) << 4); + tm->tm_mon = bcd2bin((buffer[4] & 0x30) >> 4 | (buffer[5] & 0x0F) << 4); + tm->tm_year = bcd2bin((buffer[5] & 0xF0) >> 4 | (buffer[6] & 0x0F) << 4) + 2000; tm->tm_yday = 0; tm->tm_isdst = 0; @@ -81,17 +80,17 @@ int rtc_set(struct rtc_time *tm) tm->tm_hour, tm->tm_min, tm->tm_sec); memset(buffer, 0, 7); - buffer[0] = BIN2BCD(tm->tm_sec); - buffer[1] = BIN2BCD(tm->tm_min); - buffer[2] = BIN2BCD(tm->tm_hour); - buffer[3] = BIN2BCD(tm->tm_wday); - tmp = BIN2BCD(tm->tm_mday); + buffer[0] = bin2bcd(tm->tm_sec); + buffer[1] = bin2bcd(tm->tm_min); + buffer[2] = bin2bcd(tm->tm_hour); + buffer[3] = bin2bcd(tm->tm_wday); + tmp = bin2bcd(tm->tm_mday); buffer[3] |= (tmp & 0x0F) << 4; buffer[4] = (tmp & 0xF0) >> 4; - tmp = BIN2BCD(tm->tm_mon); + tmp = bin2bcd(tm->tm_mon); buffer[4] |= (tmp & 0x0F) << 4; buffer[5] = (tmp & 0xF0) >> 4; - tmp = BIN2BCD(tm->tm_year % 100); + tmp = bin2bcd(tm->tm_year % 100); buffer[5] |= (tmp & 0x0F) << 4; buffer[6] = (tmp & 0xF0) >> 4; diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c index da87394a0..64eb1cda1 100644 --- a/drivers/rtc/rx8025.c +++ b/drivers/rtc/rx8025.c @@ -90,8 +90,6 @@ #define rtc_read(reg) buf[((reg) + 1) & 0xf] static void rtc_write (uchar reg, uchar val); -static uchar bin2bcd (unsigned int n); -static unsigned bcd2bin (uchar c); /* * Get the current time from the RTC @@ -226,14 +224,4 @@ static void rtc_write (uchar reg, uchar val) } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - #endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */ diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c index 0d3372fac..e10db9acb 100644 --- a/drivers/rtc/s3c24x0_rtc.c +++ b/drivers/rtc/s3c24x0_rtc.c @@ -58,16 +58,6 @@ static inline void SetRTC_Access(RTC_ACCESS a) } } -static unsigned bcd2bin (uchar n) -{ - return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); -} - -static unsigned char bin2bcd (unsigned int n) -{ - return (((n / 10) << 4) | (n % 10)); -} - /* ------------------------------------------------------------------------- */ int rtc_get (struct rtc_time *tmp) diff --git a/drivers/rtc/s3c44b0_rtc.c b/drivers/rtc/s3c44b0_rtc.c index bfb744aef..d087d8adb 100644 --- a/drivers/rtc/s3c44b0_rtc.c +++ b/drivers/rtc/s3c44b0_rtc.c @@ -32,29 +32,28 @@ #include <command.h> #include <asm/hardware.h> #include <rtc.h> -#include <bcd.h> int rtc_get (struct rtc_time* tm) { RTCCON |= 1; - tm->tm_year = BCD2BIN(BCDYEAR); - tm->tm_mon = BCD2BIN(BCDMON); - tm->tm_wday = BCD2BIN(BCDDATE); - tm->tm_mday = BCD2BIN(BCDDAY); - tm->tm_hour = BCD2BIN(BCDHOUR); - tm->tm_min = BCD2BIN(BCDMIN); - tm->tm_sec = BCD2BIN(BCDSEC); + tm->tm_year = bcd2bin(BCDYEAR); + tm->tm_mon = bcd2bin(BCDMON); + tm->tm_wday = bcd2bin(BCDDATE); + tm->tm_mday = bcd2bin(BCDDAY); + tm->tm_hour = bcd2bin(BCDHOUR); + tm->tm_min = bcd2bin(BCDMIN); + tm->tm_sec = bcd2bin(BCDSEC); if (tm->tm_sec==0) { /* we have to re-read the rtc data because of the "one second deviation" problem */ /* see RTC datasheet for more info about it */ - tm->tm_year = BCD2BIN(BCDYEAR); - tm->tm_mon = BCD2BIN(BCDMON); - tm->tm_mday = BCD2BIN(BCDDAY); - tm->tm_wday = BCD2BIN(BCDDATE); - tm->tm_hour = BCD2BIN(BCDHOUR); - tm->tm_min = BCD2BIN(BCDMIN); - tm->tm_sec = BCD2BIN(BCDSEC); + tm->tm_year = bcd2bin(BCDYEAR); + tm->tm_mon = bcd2bin(BCDMON); + tm->tm_mday = bcd2bin(BCDDAY); + tm->tm_wday = bcd2bin(BCDDATE); + tm->tm_hour = bcd2bin(BCDHOUR); + tm->tm_min = bcd2bin(BCDMIN); + tm->tm_sec = bcd2bin(BCDSEC); } RTCCON &= ~1; @@ -75,13 +74,13 @@ int rtc_set (struct rtc_time* tm) tm->tm_year -= 2000; RTCCON |= 1; - BCDYEAR = BIN2BCD(tm->tm_year); - BCDMON = BIN2BCD(tm->tm_mon); - BCDDAY = BIN2BCD(tm->tm_mday); - BCDDATE = BIN2BCD(tm->tm_wday); - BCDHOUR = BIN2BCD(tm->tm_hour); - BCDMIN = BIN2BCD(tm->tm_min); - BCDSEC = BIN2BCD(tm->tm_sec); + BCDYEAR = bin2bcd(tm->tm_year); + BCDMON = bin2bcd(tm->tm_mon); + BCDDAY = bin2bcd(tm->tm_mday); + BCDDATE = bin2bcd(tm->tm_wday); + BCDHOUR = bin2bcd(tm->tm_hour); + BCDMIN = bin2bcd(tm->tm_min); + BCDSEC = bin2bcd(tm->tm_sec); RTCCON &= 1; return 0; diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c index 56115b032..7adf3770d 100644 --- a/drivers/rtc/x1205.c +++ b/drivers/rtc/x1205.c @@ -38,7 +38,6 @@ #include <command.h> #include <rtc.h> #include <i2c.h> -#include <bcd.h> #if defined(CONFIG_CMD_DATE) @@ -116,13 +115,13 @@ int rtc_get(struct rtc_time *tm) buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); - tm->tm_sec = BCD2BIN(buf[CCR_SEC]); - tm->tm_min = BCD2BIN(buf[CCR_MIN]); - tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ - tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); - tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); /* mon is 0-11 */ - tm->tm_year = BCD2BIN(buf[CCR_YEAR]) - + (BCD2BIN(buf[CCR_Y2K]) * 100); + tm->tm_sec = bcd2bin(buf[CCR_SEC]); + tm->tm_min = bcd2bin(buf[CCR_MIN]); + tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ + tm->tm_mday = bcd2bin(buf[CCR_MDAY]); + tm->tm_mon = bcd2bin(buf[CCR_MONTH]); /* mon is 0-11 */ + tm->tm_year = bcd2bin(buf[CCR_YEAR]) + + (bcd2bin(buf[CCR_Y2K]) * 100); tm->tm_wday = buf[CCR_WDAY]; debug("%s: tm is secs=%d, mins=%d, hours=%d, " @@ -143,21 +142,21 @@ int rtc_set(struct rtc_time *tm) tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); - buf[CCR_SEC] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN] = BIN2BCD(tm->tm_min); + buf[CCR_SEC] = bin2bcd(tm->tm_sec); + buf[CCR_MIN] = bin2bcd(tm->tm_min); /* set hour and 24hr bit */ - buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL; - buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + buf[CCR_MDAY] = bin2bcd(tm->tm_mday); /* month, 1 - 12 */ - buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); + buf[CCR_MONTH] = bin2bcd(tm->tm_mon); /* year, since the rtc epoch*/ - buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100); + buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100); buf[CCR_WDAY] = tm->tm_wday & 0x07; - buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); + buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100); /* this sequence is required to unlock the chip */ rtc_write(X1205_REG_SR, X1205_SR_WEL); diff --git a/include/bcd.h b/include/bcd.h index c54530812..af4aa9c7b 100644 --- a/include/bcd.h +++ b/include/bcd.h @@ -3,18 +3,23 @@ * at your option. */ -/* macros to translate to/from binary and binary-coded decimal (frequently - * found in RTC chips). +/* inline functions to translate to/from binary and binary-coded decimal + * (frequently found in RTC chips). */ #ifndef _BCD_H #define _BCD_H -#define BCD2BIN(val) (((val) & 0x0f) + ((val)>>4)*10) -#define BIN2BCD(val) ((((val)/10)<<4) + (val)%10) +#include <linux/types.h> -/* backwards compat */ -#define BCD_TO_BIN(val) ((val)=BCD2BIN(val)) -#define BIN_TO_BCD(val) ((val)=BIN2BCD(val)) +static inline unsigned int bcd2bin(u8 val) +{ + return ((val) & 0x0f) + ((val) >> 4) * 10; +} + +static inline u8 bin2bcd (unsigned int val) +{ + return (((val / 10) << 4) | (val % 10)); +} #endif /* _BCD_H */ diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index e7db0cc10..1801d9d7d 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -255,7 +255,6 @@ # define CONFIG_ENV_IS_IN_FLASH 1 #endif #define CONFIG_ENV_OVERWRITE 1 -#undef CONFIG_ENV_IS_EMBEDDED /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 6b26c0bbc..2b816ceae 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -222,7 +222,6 @@ * Environment is embedded in u-boot in the second sector of the flash */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 #ifdef NORFLASH_PS32BIT # define CONFIG_ENV_OFFSET (0x8000) # define CONFIG_ENV_SIZE 0x4000 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index fc73d6409..f824158a6 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -55,7 +55,6 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 #else #define CONFIG_ENV_ADDR 0xffe04000 #define CONFIG_ENV_SECT_SIZE 0x2000 diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 210bb2def..b38015981 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -55,7 +55,6 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 #else #define CONFIG_ENV_ADDR 0xffe04000 #define CONFIG_ENV_SECT_SIZE 0x2000 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index a2d17c361..8180c05e6 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -231,7 +231,6 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 98d800f31..8652a80aa 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -231,7 +231,6 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index fa444c39e..a5acfd284 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -277,7 +277,6 @@ # define CONFIG_ENV_SECT_SIZE 0x8000 #endif #undef CONFIG_ENV_OVERWRITE -#undef CONFIG_ENV_IS_EMBEDDED /* FLASH organization */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 14d98d69c..7737284aa 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -332,7 +332,6 @@ # define CONFIG_ENV_IS_IN_FLASH 1 #endif #undef CONFIG_ENV_OVERWRITE -#undef CONFIG_ENV_IS_EMBEDDED /*----------------------------------------------------------------------- * FLASH organization diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index e48de15f7..4534002e4 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -280,7 +280,6 @@ #define CONFIG_ENV_OFFSET 0x2000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 28bf0adcf..971cb67ba 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -266,7 +266,6 @@ #define CONFIG_ENV_OFFSET 0x2000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 104c23f92..74c51f46b 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -196,7 +196,6 @@ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR 0xFFF30000 /* Offset of Environment Sector */ #define CONFIG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* short-cut compile-time test */ #define CONFIG_ENV_OVERWRITE 1 /* Allow modifying the environment */ /* diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index fb32f3f3c..1c3ea23c7 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -127,7 +127,6 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_IS_EMBEDDED 1 #else #define CONFIG_ENV_ADDR 0xffe04000 #define CONFIG_ENV_SECT_SIZE 0x2000 diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h new file mode 100644 index 000000000..e9a456996 --- /dev/null +++ b/include/configs/galaxy5200.h @@ -0,0 +1,428 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2006 + * Eric Schumann, Phytec Messatechnik GmbH + * + * (C) Copyright 2009 + * Jon Smirl <jonsmirl@gmail.com> + * + * (C) Copyright 2009 + * Eric Millbrandt, DEKA Research and Development Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_BOARDINFO "galaxy5200" + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 -> */ + /* define gps port conf. */ + /* register later on to */ + /* enable UART function! */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_PING +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_USB +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_FAT + +#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ + +#if (TEXT_BASE == 0xFE000000) /* Boot low */ +#define CONFIG_SYS_LOWBOOT 1 +#endif +/* RAMBOOT will be defined automatically in memory section */ + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \ + "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)" + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */ + /* even with bootdelay=0 */ +#undef CONFIG_BOOTARGS + +#define CONFIG_PREBOOT "echo;" \ + "echo Welcome to U-Boot"\ + "echo" + +/* + * IPB Bus clocking configuration. + */ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ +#define CONFIG_SYS_XLB_PIPELINING 1 + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM CAT24WC32 configuration + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */ +#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_SIZE 4096 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 + +/* + * RTC configuration + */ +#define RTC +#define CONFIG_RTC_DS3231 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* + * Flash configuration + */ + +#define CONFIG_SYS_FLASH_BASE 0xfe000000 +/* + * The flash size is autoconfigured, but cpu/mpc5xxx/cpu_init.c needs this + * variable defined + */ +#define CONFIG_SYS_FLASH_SIZE 0x02000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ + /* (= chip selects) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +/* + * Use hardware protection. This seems required, as the BDI uses hardware + * protection. Without this, U-Boot can't work with this sectors as its + * protection is software only by default. + */ +#define CONFIG_SYS_FLASH_PROTECTION 1 + +/* + * Environment settings + */ + +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */ + /* beginning of the EEPROM */ +#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE + +#define CONFIG_ENV_OVERWRITE 1 + +/* + * SDRAM configuration + */ +#define SDRAM_DDR 1 +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x71500F00 +#define SDRAM_CONFIG1 0x73711930 +#define SDRAM_CONFIG2 0x47770000 + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */ + /* bootloader or debugger config */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM + +/* End of used area in SPRAM */ +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE + +/* Size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* Chip Select configuration for NAND flash */ +#define CONFIG_SYS_CS1_START 0x20000000 +#define CONFIG_SYS_CS1_SIZE 0x90000 +#define CONFIG_SYS_CS1_CFG 0x0002d900 + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x01 +#define CONFIG_NO_AUTOLOAD 1 + +/* + * GPIO configuration + * + * GPS port configuration + * + * [29:31] = 01x + * AC97 on PSC1 + * PSC1_0 -> AC97 SDATA out + * PSC1_1 -> AC97 SDTA in + * PSC1_2 -> AC97 SYNC out + * PSC1_3 -> AC97 bitclock out + * PSC1_4 -> AC97 reset out + * + * [28] = Reserved + * + * [25:27] = 110 + * SPI on PSC2 + * PSC2_0 -> MOSI + * PSC2_1 -> MISO + * PSC2_2 -> n/a + * PSC2_3 -> CLK + * PSC2_4 -> SS + * + * [24] = Reserved + * + * [20:23] = 0001 + * USB on PSC3 + * PSC3_0 -> USB_OE OE out + * PSC3_1 -> USB_TXN Tx- out + * PSC3_2 -> USB_TXP Tx+ out + * PSC3_3 -> USB_TXD + * PSC3_4 -> USB_RXP Rx+ in + * PSC3_5 -> USB_RXN Rx- in + * PSC3_6 -> USB_PWR PortPower out + * PSC3_7 -> USB_SPEED speed out + * PSC3_8 -> USB_SUSPEND suspend + * PSC3_9 -> USB_OVRCURNT overcurrent in + * + * [18:19] = 10 + * Two UARTs + * + * [17] = 0 + * USB differential mode + * + * [16] = 1 + * PCI disabled + * + * [12:15] = 0101 + * Ethernet 100Mbit with MD + * ETH_0 -> ETH Txen + * ETH_1 -> ETH TxD0 + * ETH_2 -> ETH TxD1 + * ETH_3 -> ETH TxD2 + * ETH_4 -> ETH TxD3 + * ETH_5 -> ETH Txerr + * ETH_6 -> ETH MDC + * ETH_7 -> ETH MDIO + * ETH_8 -> ETH RxDv + * ETH_9 -> ETH RxCLK + * ETH_10 -> ETH Collision + * ETH_11 -> ETH TxD + * ETH_12 -> ETH RxD0 + * ETH_13 -> ETH RxD1 + * ETH_14 -> ETH RxD2 + * ETH_15 -> ETH RxD3 + * ETH_16 -> ETH Rxerr + * ETH_17 -> ETH CRS + * + * [9:11] = 111 + * SPI on PSC6 + * PSC6_0 -> MISO + * PSC6_1 -> SS# + * PSC6_2 -> MOSI + * PSC6_3 -> CLK + * + * [8] = 0 + * IrDA/USB 48MHz clock generated internally + * + * [6:7] = 01 + * ATA chip selects on csb_4/5 + * CSB_4 -> ATA_CS0 out + * CSB_5 -> ATA_CS1 out + * + * [5] = 1 + * PSC3_4 is used as CS6 + * + * [4] = 1 + * PSC3_5 is used as CS7 + * + * [2:3] = 00 + * No Alternatives + * + * [1] = 0 + * gpio_wkup_7 is GPIO + * + * [0] = 0 + * gpio_wkup_6 is GPIO + * + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x0d75a162 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_DISPLAY_BOARDINFO 1 + +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_CRC32_VERIFY 1 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_DNS | \ + CONFIG_BOOTP_DNS2 | \ + CONFIG_BOOTP_SEND_HOSTNAME ) + +/* + * Various low-level settings + */ +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +/* no burst access on the LPB */ +#define CONFIG_SYS_CS_BURST 0x00000000 +/* one deadcycle for the 33MHz statemachine */ +#define CONFIG_SYS_CS_DEADCYCLE 0x33333331 + +#define CONFIG_SYS_BOOTCS_CFG 0x0002d900 +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/* + * USB settings + */ +#define CONFIG_USB_CLOCK 0x0001bbbb +/* USB is on PSC3 */ +#define CONFIG_PSC3_USB +#define CONFIG_USB_CONFIG 0x00000100 +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* + * IDE/ATA stuff Supports IDE harddisk + */ +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET 1 /* reset for ide supported */ +#define CONFIG_IDE_PREINIT +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 +#define CONFIG_ATAPI 1 + +/* we enable IDE and FAT support, so we also need partition support */ +#define CONFIG_DOS_PARTITION 1 + +/* + * Open Firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN +#define OF_SOC "soc5200@f0000000" +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2600" + +#endif /* __CONFIG_H */ diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h index 7c2bf1b0f..651738117 100644 --- a/include/configs/pcu_e.h +++ b/include/configs/pcu_e.h @@ -231,7 +231,6 @@ #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment */ #define CONFIG_ENV_ADDR 0xFFFFE000 /* Address of Environment Sector */ #define CONFIG_ENV_SECT_SIZE 0x2000 /* use the top-most 8k boot sector */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* short-cut compile-time test */ #else /* Final version: environment in EEPROM */ #define CONFIG_ENV_IS_IN_EEPROM 1 diff --git a/include/environment.h b/include/environment.h index 5bed32fd4..b9924fd77 100644 --- a/include/environment.h +++ b/include/environment.h @@ -67,6 +67,10 @@ # if defined(CONFIG_ENV_ADDR_REDUND) || defined(CONFIG_ENV_OFFSET_REDUND) # define CONFIG_SYS_REDUNDAND_ENVIRONMENT 1 # endif +# ifdef CONFIG_ENV_IS_EMBEDDED +# error "do not define CONFIG_ENV_IS_EMBEDDED in your board config" +# error "it is calculated automatically for you" +# endif #endif /* CONFIG_ENV_IS_IN_FLASH */ #if defined(CONFIG_ENV_IS_IN_NAND) @@ -79,9 +83,6 @@ # ifdef CONFIG_ENV_OFFSET_REDUND # define CONFIG_SYS_REDUNDAND_ENVIRONMENT # endif -# ifdef CONFIG_ENV_IS_EMBEDDED -# define ENV_IS_EMBEDDED 1 -# endif #endif /* CONFIG_ENV_IS_IN_NAND */ #if defined(CONFIG_ENV_IS_IN_MG_DISK) @@ -91,11 +92,32 @@ # ifndef CONFIG_ENV_SIZE # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_MG_DISK" # endif -# ifdef CONFIG_ENV_IS_EMBEDDED -# error "CONFIG_ENV_IS_EMBEDDED not supported when using CONFIG_ENV_IS_IN_MG_DISK" -# endif #endif /* CONFIG_ENV_IS_IN_MG_DISK */ +/* Embedded env is only supported for some flash types */ +#ifdef CONFIG_ENV_IS_EMBEDDED +# if !defined(CONFIG_ENV_IS_IN_FLASH) && \ + !defined(CONFIG_ENV_IS_IN_NAND) && \ + !defined(CONFIG_ENV_IS_IN_ONENAND) +# error "CONFIG_ENV_IS_EMBEDDED not supported for your flash type" +# endif +#endif + +/* + * For the flash types where embedded env is supported, but it cannot be + * calculated automatically (i.e. NAND), take the board opt-in. + */ +#if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED) +# define ENV_IS_EMBEDDED 1 +#endif + +/* The build system likes to know if the env is embedded */ +#ifdef DO_DEPS_ONLY +# ifdef ENV_IS_EMBEDDED +# define CONFIG_ENV_IS_EMBEDDED +# endif +#endif + #include "compiler.h" #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h index 227feeb0c..0644d92b3 100644 --- a/include/linux/mc146818rtc.h +++ b/include/linux/mc146818rtc.h @@ -83,16 +83,4 @@ #define RTC_VALID RTC_REG_D # define RTC_VRT 0x80 /* valid RAM and time */ /**********************************************************************/ - -/* example: !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) - * determines if the following two #defines are needed - */ -#ifndef BCD_TO_BIN -#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10) -#endif - -#ifndef BIN_TO_BCD -#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10) -#endif - #endif /* _MC146818RTC_H */ diff --git a/include/rtc.h b/include/rtc.h index 785fbe380..772a54884 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -27,6 +27,11 @@ #ifndef _RTC_H_ #define _RTC_H_ +/* bcd<->bin functions are needed by almost all the RTC drivers, let's include + * it there instead of in evey single driver */ + +#include <bcd.h> + /* * The struct used to pass data from the generic interface code to * the hardware dependend low-level code ande vice versa. Identical |