diff options
| -rw-r--r-- | CREDITS | 4 | ||||
| -rw-r--r-- | MAINTAINERS | 4 | ||||
| -rwxr-xr-x | MAKEALL | 1 | ||||
| -rw-r--r-- | Makefile | 3 | ||||
| -rw-r--r-- | board/freescale/mpc8610hpcd/mpc8610hpcd.c | 36 | ||||
| -rw-r--r-- | board/freescale/mpc8641hpcn/mpc8641hpcn.c | 36 | ||||
| -rw-r--r-- | board/mvblm7/Makefile | 48 | ||||
| -rw-r--r-- | board/mvblm7/config.mk | 25 | ||||
| -rw-r--r-- | board/mvblm7/fpga.c | 188 | ||||
| -rw-r--r-- | board/mvblm7/fpga.h | 34 | ||||
| -rw-r--r-- | board/mvblm7/mvblm7.c | 157 | ||||
| -rw-r--r-- | board/mvblm7/mvblm7.h | 21 | ||||
| -rw-r--r-- | board/mvblm7/mvblm7_autoscript | 37 | ||||
| -rw-r--r-- | board/mvblm7/pci.c | 133 | ||||
| -rw-r--r-- | cpu/mpc86xx/traps.c | 8 | ||||
| -rw-r--r-- | doc/README.mvblm7 | 85 | ||||
| -rw-r--r-- | include/configs/MPC8610HPCD.h | 2 | ||||
| -rw-r--r-- | include/configs/MPC8641HPCN.h | 1 | ||||
| -rw-r--r-- | include/configs/MVBLM7.h | 479 | ||||
| -rw-r--r-- | include/mpc83xx.h | 1 | ||||
| -rw-r--r-- | lib_generic/md5.c | 2 | ||||
| -rw-r--r-- | lib_generic/sha1.c | 2 |
22 files changed, 1231 insertions, 76 deletions
@@ -424,6 +424,10 @@ N: Paolo Scaffardi E: arsenio@tin.it D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more +N: Andre Schwarz +E: andre.schwarz@matrix-vision.de +D: Support for Matrix Vision boards (MVBLM7) + N: Robert Schwebel E: r.schwebel@pengutronix.de D: Support for csb226, logodl and innokom boards (PXA2xx) diff --git a/MAINTAINERS b/MAINTAINERS index d3dfd4803..357cab3e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -371,6 +371,10 @@ Peter De Schrijver <p2@mind.be> ML2 PPC4xx +Andre Schwarz <andre.schwarz@matrix-vision.de> + + mvblm7 MPC8343 + Timur Tabi <timur@freescale.com> MPC8349E-mITX MPC8349 @@ -331,6 +331,7 @@ LIST_83xx=" \ MPC8360ERDK_66 \ MPC837XEMDS \ MPC837XERDB \ + MVBLM7 \ sbc8349 \ TQM834x \ " @@ -2107,6 +2107,9 @@ MPC837XEMDS_HOST_config: unconfig MPC837XERDB_config: unconfig @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale +MVBLM7_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 + sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 3a855b590..ce563dc67 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -141,42 +141,6 @@ initdram(int board_type) } -#if defined(CFG_DRAM_TEST) -int -testdram(void) -{ - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; - uint *p; - - puts("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test passed.\n"); - return 0; -} -#endif - - #if !defined(CONFIG_SPD_EEPROM) /* * Fixed sdram init -- doesn't use serial presence detect. diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index bb1f927b9..915fb58ee 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -81,42 +81,6 @@ initdram(int board_type) } -#if defined(CFG_DRAM_TEST) -int -testdram(void) -{ - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; - uint *p; - - puts("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - puts("SDRAM test passed.\n"); - return 0; -} -#endif - - #if !defined(CONFIG_SPD_EEPROM) /* * Fixed sdram init -- doesn't use serial presence detect. diff --git a/board/mvblm7/Makefile b/board/mvblm7/Makefile new file mode 100644 index 000000000..84cd14a87 --- /dev/null +++ b/board/mvblm7/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o fpga.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mvblm7/config.mk b/board/mvblm7/config.mk new file mode 100644 index 000000000..1d85f4fd0 --- /dev/null +++ b/board/mvblm7/config.mk @@ -0,0 +1,25 @@ +# +# Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +TEXT_BASE = 0xFFF00000 diff --git a/board/mvblm7/fpga.c b/board/mvblm7/fpga.c new file mode 100644 index 000000000..a60af019a --- /dev/null +++ b/board/mvblm7/fpga.c @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * (C) Copyright 2008 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ACEX1K.h> +#include <command.h> +#include "fpga.h" +#include "mvblm7.h" + +#ifdef FPGA_DEBUG +#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args) +#else +#define fpga_debug(fmt, args...) +#endif + +Altera_CYC2_Passive_Serial_fns altera_fns = { + fpga_null_fn, + fpga_config_fn, + fpga_status_fn, + fpga_done_fn, + fpga_wr_fn, + fpga_null_fn, + fpga_null_fn, + 0 +}; + +Altera_desc cyclone2 = { + Altera_CYC2, + passive_serial, + Altera_EP2C20_SIZE, + (void *) &altera_fns, + NULL, + 0 +}; + +DECLARE_GLOBAL_DATA_PTR; + +int mvblm7_init_fpga(void) +{ + fpga_debug("Initialize FPGA interface (reloc 0x%.8lx)\n", + gd->reloc_off); + fpga_init(gd->reloc_off); + fpga_add(fpga_altera, &cyclone2); + fpga_config_fn(0, 1, 0); + udelay(60); + + return 1; +} + +int fpga_null_fn(int cookie) +{ + return 0; +} + +int fpga_config_fn(int assert, int flush, int cookie) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0]; + u32 dvo = gpio->dat; + + fpga_debug("SET config : %s\n", assert ? "low" : "high"); + if (assert) + dvo |= FPGA_CONFIG; + else + dvo &= ~FPGA_CONFIG; + + if (flush) + gpio->dat = dvo; + + return assert; +} + +int fpga_done_fn(int cookie) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0]; + int result = 0; + + udelay(10); + fpga_debug("CONF_DONE check ... "); + if (gpio->dat & FPGA_CONF_DONE) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + + return result; +} + +int fpga_status_fn(int cookie) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0]; + int result = 0; + + fpga_debug("STATUS check ... "); + if (gpio->dat & FPGA_STATUS) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + + return result; +} + +int fpga_clk_fn(int assert_clk, int flush, int cookie) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0]; + u32 dvo = gpio->dat; + + fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low"); + if (assert_clk) + dvo |= FPGA_CCLK; + else + dvo &= ~FPGA_CCLK; + + if (flush) + gpio->dat = dvo; + + return assert_clk; +} + +static inline int _write_fpga(u8 val, int dump) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0]; + int i; + u32 dvo = gpio->dat; + + if (dump) + fpga_debug(" %02x -> ", val); + for (i = 0; i < 8; i++) { + dvo &= ~FPGA_CCLK; + gpio->dat = dvo; + dvo &= ~FPGA_DIN; + if (dump) + fpga_debug("%d ", val&1); + if (val & 1) + dvo |= FPGA_DIN; + gpio->dat = dvo; + dvo |= FPGA_CCLK; + gpio->dat = dvo; + val >>= 1; + } + if (dump) + fpga_debug("\n"); + + return 0; +} + +int fpga_wr_fn(void *buf, size_t len, int flush, int cookie) +{ + unsigned char *data = (unsigned char *) buf; + int i; + + fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); + for (i = 0; i < len; i++) + _write_fpga(data[i], 0); + fpga_debug("\n"); + + return FPGA_SUCCESS; +} diff --git a/board/mvblm7/fpga.h b/board/mvblm7/fpga.h new file mode 100644 index 000000000..19277eb05 --- /dev/null +++ b/board/mvblm7/fpga.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +extern int mvblm7_init_fpga(void); + +extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie); +extern int fpga_status_fn(int cookie); +extern int fpga_config_fn(int assert, int flush, int cookie); +extern int fpga_done_fn(int cookie); +extern int fpga_clk_fn(int assert_clk, int flush, int cookie); +extern int fpga_wr_fn(void *buf, size_t len, int flush, int cookie); +extern int fpga_null_fn(int cookie); diff --git a/board/mvblm7/mvblm7.c b/board/mvblm7/mvblm7.c new file mode 100644 index 000000000..c02c59ce8 --- /dev/null +++ b/board/mvblm7/mvblm7.c @@ -0,0 +1,157 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * (C) Copyright 2008 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <asm/mpc8349_pci.h> +#include <pci.h> +#include <spi.h> +#include <asm/mmu.h> +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif + +#include "mvblm7.h" + +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); + ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) + return -1; + } + im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & + LAWAR_SIZE); + + im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + + udelay(300); + + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return CFG_DDR_SIZE; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; + msize = fixed_sdram(); + + /* return total bus RAM size(bytes) */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ + puts("Board: Matrix Vision mvBlueLYNX-M7 " MV_VERSION "\n"); + + return 0; +} + +u8 *dhcp_vendorex_prep(u8 *e) +{ + char *ptr; + + /* DHCP vendor-class-identifier = 60 */ + ptr = getenv("dhcp_vendor-class-identifier"); + if (ptr) { + *e++ = 60; + *e++ = strlen(ptr); + while (*ptr) + *e++ = *ptr++; + } + /* DHCP_CLIENT_IDENTIFIER = 61 */ + ptr = getenv("dhcp_client_id"); + if (ptr) { + *e++ = 61; + *e++ = strlen(ptr); + while (*ptr) + *e++ = *ptr++; + } + + return e; +} + +u8 *dhcp_vendorex_proc(u8 *popt) +{ + return NULL; +} + +#ifdef CONFIG_HARD_SPI +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + + iopd->dat &= ~MVBLM7_MMC_CS; +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + + iopd->dat |= ~MVBLM7_MMC_CS; +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} + +#endif diff --git a/board/mvblm7/mvblm7.h b/board/mvblm7/mvblm7.h new file mode 100644 index 000000000..03e9f4170 --- /dev/null +++ b/board/mvblm7/mvblm7.h @@ -0,0 +1,21 @@ +#ifndef __MVBC_H__ +#define __MVBC_H__ + +#define MV_GPIO + +#define FPGA_CONFIG 0x80000000 +#define FPGA_CCLK 0x40000000 +#define FPGA_DIN 0x20000000 +#define FPGA_STATUS 0x10000000 +#define FPGA_CONF_DONE 0x08000000 +#define MMC_CS 0x04000000 + +#define WD_WDI 0x00400000 +#define WD_TS 0x00200000 +#define MAN_RST 0x00100000 + +#define MV_GPIO_DAT (WD_TS) +#define MV_GPIO_OUT (FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|WD_TS|WD_WDI|MMC_CS) +#define MV_GPIO_ODE (FPGA_CONFIG|MAN_RST) + +#endif diff --git a/board/mvblm7/mvblm7_autoscript b/board/mvblm7/mvblm7_autoscript new file mode 100644 index 000000000..ec6e34ef0 --- /dev/null +++ b/board/mvblm7/mvblm7_autoscript @@ -0,0 +1,37 @@ +echo +echo "==== running autoscript ====" +echo +setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram} +setenv ramkernel setenv kernel_boot \${loadaddr} +setenv flashkernel setenv kernel_boot \${mv_kernel_addr} +setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length} +setenv bootfromflash run flashkernel cpird ramparam bootdtb +setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name} +setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000 +setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup +setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel +setenv set_static_ip setenv ipaddr \${static_ipaddr} +setenv set_static_nm setenv netmask \${static_netmask} +setenv set_static_gw setenv gatewayip \${static_gateway} +setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} +setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs +if test ${autoscr_boot} != no; +then + if test ${netboot} = yes; + then + bootp + if test $? = 0; + then + echo "=== bootp succeeded -> netboot ===" + run set_ip + run getdtb rundtb bootfromnet ramparam bootdtb + else + echo "=== netboot failed ===" + fi + fi + run set_static_ip set_static_nm set_static_gw set_ip + echo "=== bootfromflash ===" + run cpdtb rundtb bootfromflash +else + echo "=== boot stopped with autoscr_boot no ===" +fi diff --git a/board/mvblm7/pci.c b/board/mvblm7/pci.c new file mode 100644 index 000000000..ef34a6b45 --- /dev/null +++ b/board/mvblm7/pci.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * (C) Copyright 2008 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#endif +#include <pci.h> +#include <mpc83xx.h> +#include <fpga.h> +#include "mvblm7.h" +#include "fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +int mvblm7_load_fpga(void) +{ + size_t data_size = 0; + void *fpga_data = NULL; + char *datastr = getenv("fpgadata"); + char *sizestr = getenv("fpgadatasize"); + + if (datastr) + fpga_data = (void *)simple_strtoul(datastr, NULL, 16); + if (sizestr) + data_size = (size_t)simple_strtoul(sizestr, NULL, 16); + + return fpga_load(0, fpga_data, data_size); +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + char *s; + int i; + int warmboot; + int load_fpga; + volatile immap_t *immr; + volatile pcictrl83xx_t *pci_ctrl; + volatile gpio83xx_t *gpio; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + struct pci_region *reg[] = { pci_regions }; + + load_fpga = 1; + immr = (immap_t *) CFG_IMMR; + clk = (clk83xx_t *) &immr->clk; + pci_ctrl = immr->pci_ctrl; + pci_law = immr->sysconf.pcilaw; + gpio = (volatile gpio83xx_t *)&immr->gpio[0]; + + s = getenv("skip_fpga"); + if (s) { + printf("found 'skip_fpga' -> FPGA _not_ loaded !\n"); + load_fpga = 0; + } + + gpio->dat = MV_GPIO_DAT; + gpio->odr = MV_GPIO_ODE; + if (load_fpga) + gpio->dir = MV_GPIO_OUT; + else + gpio->dir = MV_GPIO_OUT & ~(FPGA_DIN|FPGA_CCLK); + + printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh, + immr->sysconf.sicrl); + + mvblm7_init_fpga(); + if (load_fpga) + mvblm7_load_fpga(); + + /* Enable PCI_CLK_OUTPUTs 0 and 1 with 1:1 clocking */ + clk->occr = 0xc0000000; + + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + + for (i = 0; i < 1000; ++i) + udelay(1000); + + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_1GB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; + + mpc83xx_pci_init(1, reg, warmboot); +} diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c index 04c2e1331..5695c3e45 100644 --- a/cpu/mpc86xx/traps.c +++ b/cpu/mpc86xx/traps.c @@ -43,7 +43,13 @@ int (*debugger_exception_handler)(struct pt_regs *) = 0; /* Returns 0 if exception not found and fixup otherwise. */ extern unsigned long search_exception_table(unsigned long); -#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize) +/* + * End of addressable memory. This may be less than the actual + * amount of memory on the system if we're unable to keep all + * the memory mapped in. + */ +extern ulong get_effective_memsize(void); +#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize()) /* * Trap & Exception support diff --git a/doc/README.mvblm7 b/doc/README.mvblm7 new file mode 100644 index 000000000..6a4088806 --- /dev/null +++ b/doc/README.mvblm7 @@ -0,0 +1,85 @@ +Matrix Vision mvBlueLYNX-M7 (mvBL-M7) +------------------------------------- + +1. Board Description + + The mvBL-M7 is a 120x120mm single board computing platform + with strong focus on stereo image processing applications. + + Power Supply is either VDC 12-48V or Pover over Ethernet (PoE) + on any port (requires add-on board). + +2 System Components + +2.1 CPU + Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb. + 512MByte DDR-II memory @ 133MHz. + 8 MByte Nor Flash on local bus. + 2 Vitesse VSC8601 RGMII ethernet Phys. + 1 USB host controller over ULPI I/F. + 2 serial ports. Console running on ttyS0 @ 115200 8N1. + 1 SD-Card slot connected to SPI. + System configuration (HRCW) is taken from I2C EEPROM. + +2.2 PCI + A miniPCI Type-III socket is present. PCI clock fixed at 66MHz. + +2.3 FPGA + Altera Cyclone-II EP2C20/35 with PCI DMA engines. + Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces. + Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash. + +2.3.1 I/O @ FPGA + 2x8 Outputs : Infineon High-Side Switches to Main Supply. + 2x8 Inputs : Programmable input threshold + trigger capabilities + 2 dedicated flash interfaces for illuminator boards. + Cross trigger for chaining several boards. + +2.4 I2C + Bus1: + MAX5381 DAC @ 0x60 for 1st digital input threshold. + LM75 @ 0x90 for temperature monitoring. + EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics. + 1st image sensor interface (slave adresses depend on sensor) + Bus2: + MAX5381 DAC @ 0x60 for 2nd digital input threshold. + 2nd image sensor interface (slave adresses depend on sensor) + +3 Flash layout. + + reset vector is 0xFFF00100, i.e. "HIGHBOOT". + + FF800000 environment + FF802000 redundant environment + FF804000 u-boot script image + FF806000 redundant u-boot script image + FF808000 device tree blob + FF80A000 redundant device tree blob + FF80C000 tbd. + FF80E000 tbd. + FF810000 kernel + FFC00000 root FS + FFF00000 u-boot + FFF80000 FPGA raw bit file + + mtd partitions are propagated to linux kernel via device tree blob. + +4 Booting + + On startup the bootscript @ FF804000 is executed. This script can be + exchanged easily. Default boot mode is "boot from flash", i.e. system + works stand-alone. + + This behaviour depends on some environment variables : + + "netboot" : yes ->try dhcp/bootp and boot from network. + A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for + DHCP server configuration, e.g. to provide different images to + different devices. + + During netboot the system tries to get 3 image files: + 1. Kernel - name + data is given during BOOTP. + 2. Initrd - name is stored in "initrd_name" + 3. device tree blob - name is stored in "dtb_name" + Fallback files are the flash versions. + diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index a051b6d39..fc168909e 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -72,10 +72,8 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_R 1 -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ #define CFG_MEMTEST_END 0x00400000 -#define CFG_ALT_MEMTEST /* * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 49ee7ffd3..455e15422 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -87,7 +87,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#undef CFG_DRAM_TEST /* memory test, takes time */ #define CFG_MEMTEST_START 0x00200000 /* memtest region */ #define CFG_MEMTEST_END 0x00400000 diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h new file mode 100644 index 000000000..349ca14bb --- /dev/null +++ b/include/configs/MVBLM7.h @@ -0,0 +1,479 @@ +/* + * Copyright (C) Matrix Vision GmbH 2008 + * + * Matrix Vision mvBlueLYNX-M7 configuration file + * based on Freescale's MPC8349ITX. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define MV_VERSION "v1.0.1" + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC834X 1 +#define CONFIG_MPC8343 1 + +#define CFG_IMMR 0xE0000000 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI +#define CONFIG_PCI_SKIP_HOST_BRIDGE +#define CONFIG_HARD_I2C +#define CONFIG_TSEC_ENET +#define CONFIG_MPC8XXX_SPI +#define CONFIG_HARD_SPI +#define MVBLM7_MMC_CS 0x04000000 + +/* I2C */ +#undef CONFIG_SOFT_I2C + +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 0x7F + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_83XX_DDR_USES_CS0 1 +#define CFG_MEMTEST_START (60<<20) +#define CFG_MEMTEST_END (70<<20) + +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + +#define CFG_DDR_SIZE 256 + +/* HC, 75Ohm, DDR-II, DRQ */ +#define CFG_DDRCDR 0x80000001 +/* EN, ODT_WR, 3BA, 14row, 10col */ +#define CFG_DDR_CS0_CONFIG 0x80014102 +#define CFG_DDR_CS1_CONFIG 0x0 +#define CFG_DDR_CS2_CONFIG 0x0 +#define CFG_DDR_CS3_CONFIG 0x0 + +#define CFG_DDR_CS0_BNDS 0x0000000f +#define CFG_DDR_CS1_BNDS 0x0 +#define CFG_DDR_CS2_BNDS 0x0 +#define CFG_DDR_CS3_BNDS 0x0 + +#define CFG_DDR_CLK_CNTL 0x02000000 + +#define CFG_DDR_TIMING_0 0x00260802 +#define CFG_DDR_TIMING_1 0x2625b221 +#define CFG_DDR_TIMING_2 0x1f9820c7 +#define CFG_DDR_TIMING_3 0x00000000 + +/* ~MEM_EN, SREN, DDR-II, 32_BE */ +#define CFG_DDR_SDRAM_CFG 0x43080000 +#define CFG_DDR_SDRAM_CFG2 0x00401000 +#define CFG_DDR_INTERVAL 0x04060100 + +#define CFG_DDR_MODE 0x078e0232 + +/* Flash */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CFG_FLASH_BASE 0xFF800000 +#define CFG_FLASH_SIZE 8 +#define CFG_FLASH_SIZE_SHIFT 3 +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_ERASE_TOUT 60000 +#define CFG_FLASH_WRITE_TOUT 500 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) +#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\ + OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \ + OR_GPCM_EAD) +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE +#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) + +/* + * U-Boot memory configuration + */ +#define CFG_MONITOR_BASE TEXT_BASE +#undef CFG_RAMBOOT + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ +#define CFG_MONITOR_LEN (512 * 1024) +#define CFG_MALLOC_LEN (512 * 1024) + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +/* LB sdram refresh timer, about 6us */ +#define CFG_LBC_LSRT 0x32000000 +/* LB refresh timer prescal, 266MHz/32*/ +#define CFG_LBC_MRTPR 0x20000000 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_CONSOLE ttyS0 +#define CONFIG_BAUDRATE 115200 + +#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 +#define MV_DTB_NAME "mvblm7.dtb" + +/* + * PCI + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 +#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x01000000 + +#define _IO_BASE 0x00000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 3 + +#define PCI_66M +#define CONFIG_83XX_CLKIN 66666667 +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW + +/* TSEC */ +#define CONFIG_GMII +#define CFG_VSC8601_SKEWFIX +#define CFG_VSC8601_SKEW_TX 3 +#define CFG_VSC8601_SKEW_RX 3 + +#define CONFIG_TSEC1 +#define CONFIG_TSEC2 + +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_FEC1_PHY_NORXERR +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define TSEC1_PHY_ADDR 0x10 +#define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) + +#define CONFIG_HAS_ETH1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_FEC2_PHY_NORXERR +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define TSEC2_PHY_ADDR 0x11 +#define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED) + +#define CONFIG_ETHPRIME "TSEC0" + +#define CONFIG_BOOTP_VENDOREX +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_RANDOM_DELAY +#define CONFIG_BOOTP_SEND_HOSTNAME + +/* USB */ +#define CONFIG_HAS_FSL_DR_USB + +/* + * Environment + */ +#undef CFG_FLASH_PROTECTION +#define CONFIG_ENV_OVERWRITE + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFF800000 +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE + +#define CONFIG_LOADS_ECHO +#define CFG_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_I2C +#define CONFIG_CMD_FPGA + +#undef CONFIG_WATCHDOG + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* default load address */ +#define CFG_LOAD_ADDR 0x2000000 +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 0x200000 + +#define CFG_PROMPT "mvBL-M7> " +#define CFG_CBSIZE 256 + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE +#define CFG_HZ 1000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +#define CFG_HRCW_LOW 0x0 +#define CFG_HRCW_HIGH 0x0 + +/* + * System performance + */ +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ +#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ +#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ + +/* clocking */ +#define CFG_SCCR_ENCCM 0 +#define CFG_SCCR_USBMPHCM 0 +#define CFG_SCCR_USBDRCM 2 +#define CFG_SCCR_TSEC1CM 1 +#define CFG_SCCR_TSEC2CM 1 + +#define CFG_SICRH 0x1fff8003 +#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL CFG_HID0_INIT + +#define CFG_HID2 HID2_HBE + +/* DDR */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* no PCI2 */ +#define CFG_IBAT3L 0 +#define CFG_IBAT3U 0 +#define CFG_IBAT4L 0 +#define CFG_IBAT4U 0 + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT7L 0 +#define CFG_IBAT7U 0 + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_NETDEV eth0 + +/* Default path and filenames */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "s" +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_RESET_TO_RETRY 1000 + +#define MV_CI "mvBL-M7" +#define MV_VCI "mvBL-M7" +#define MV_FPGA_DATA "0xfff80000" +#define MV_FPGA_SIZE "0x76ca2" +#define MV_KERNEL_ADDR "0xff810000" +#define MV_INITRD_ADDR "0xffc00000" +#define MV_AUTOSCR_ADDR "0xff804000" +#define MV_AUTOSCR_ADDR2 "0xff806000" +#define MV_DTB_ADDR "0xff808000" +#define MV_INITRD_LENGTH "0x00300000" + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + +#define MV_KERNEL_ADDR_RAM "0x00100000" +#define MV_DTB_ADDR_RAM "0x00600000" +#define MV_INITRD_ADDR_RAM "0x01000000" + +#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ + then autoscr ${autoscr_addr}; \ + else autoscr ${autoscr_addr2}; \ + fi;" +#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "fpga=0\0" \ + "fpgadata=" MV_FPGA_DATA "\0" \ + "fpgadatasize=" MV_FPGA_SIZE "\0" \ + "autoscr_addr=" MV_AUTOSCR_ADDR "\0" \ + "autoscr_addr2=" MV_AUTOSCR_ADDR2 "\0" \ + "mv_kernel_addr=" MV_KERNEL_ADDR "\0" \ + "mv_kernel_addr_ram=" MV_KERNEL_ADDR_RAM "\0" \ + "mv_initrd_addr=" MV_INITRD_ADDR "\0" \ + "mv_initrd_addr_ram=" MV_INITRD_ADDR_RAM "\0" \ + "mv_initrd_length=" MV_INITRD_LENGTH "\0" \ + "mv_dtb_addr=" MV_DTB_ADDR "\0" \ + "mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \ + "dtb_name=" MV_DTB_NAME "\0" \ + "mv_version=" MV_VERSION "\0" \ + "dhcp_client_id=" MV_CI "\0" \ + "dhcp_vendor-class-identifier=" MV_VCI "\0" \ + "netretry=no\0" \ + "use_static_ipaddr=no\0" \ + "static_ipaddr=192.168.90.10\0" \ + "static_netmask=255.255.255.0\0" \ + "static_gateway=0.0.0.0\0" \ + "initrd_name=uInitrd.mvblm7-xenorfs\0" \ + "zcip=no\0" \ + "netboot=yes\0" \ + "mvtest=Ff\0" \ + "tried_bootfromflash=no\0" \ + "tried_bootfromnet=no\0" \ + "bootfile=mvblm72625.boot\0" \ + "use_dhcp=yes\0" \ + "gev_start=yes\0" \ + "mvbcdma_debug=0\0" \ + "mvbcia_debug=0\0" \ + "propdev_debug=0\0" \ + "gevss_debug=0\0" \ + "watchdog=0\0" \ + "usb_dr_mode=host\0" \ + "" + +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 + +#endif diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 08084208e..939b82541 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -821,6 +821,7 @@ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 #define CSCONFIG_ODT_WR_ACS 0x00010000 +#define CSCONFIG_BANK_BIT_3 0x00004000 #define CSCONFIG_ROW_BIT 0x00000700 #define CSCONFIG_ROW_BIT_12 0x00000000 #define CSCONFIG_ROW_BIT_13 0x00000100 diff --git a/lib_generic/md5.c b/lib_generic/md5.c index 78ef47535..a9aae4682 100644 --- a/lib_generic/md5.c +++ b/lib_generic/md5.c @@ -27,6 +27,8 @@ #ifndef USE_HOSTCC #include <common.h> +#else +#include <string.h> #endif /* USE_HOSTCC */ #include <watchdog.h> #include <linux/types.h> diff --git a/lib_generic/sha1.c b/lib_generic/sha1.c index c8ef4d282..a192e5f3d 100644 --- a/lib_generic/sha1.c +++ b/lib_generic/sha1.c @@ -31,6 +31,8 @@ #ifndef USE_HOSTCC #include <common.h> +#else +#include <string.h> #endif /* USE_HOSTCC */ #include <watchdog.h> #include <linux/string.h> |