diff options
| -rw-r--r-- | CHANGELOG | 398 | ||||
| -rw-r--r-- | MAINTAINERS | 5 |
2 files changed, 403 insertions, 0 deletions
@@ -1,3 +1,368 @@ +commit 5ba7390c3cb579172be66888a371707b47b5be4e +Author: Anatolij Gustschin <agust@denx.de> +Date: Fri Jan 11 02:15:02 2008 +0100 + + Fix compilation problem in common/cmd_bmp.c + + common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP + isn't defined. This patch fix this. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 5aa437baae5fe629abeab99bef793a2a1fc71b58 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Jan 11 01:12:09 2008 +0100 + + Fix defaultconfig for the mgcoge board. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit ac9db066b26935f31bff15c98168b19faeb603f3 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Jan 11 01:12:08 2008 +0100 + + Added support for the mgcoge board from keymile. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Jan 11 01:12:07 2008 +0100 + + Enable SMC microcode relocation patch for SMC1. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Jan 11 01:12:06 2008 +0100 + + Added support for the mgsuvd board from keymile. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit bf05293973b348f6946c9df92cd3c65ece42d0be +Author: James Yang <james.yang@freescale.com> +Date: Thu Jan 10 16:02:07 2008 -0600 + + Fix 64-bit vsprintf. + + There were some size and unsigned problems. + Also add support for "ll" size modifier in format string like glibc + + Signed-off-by: James Yang <James.Yang@freescale.com> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit 92fa37eac530860643afa26ae347af3d23d67309 +Author: Larry Johnson <lrj@acm.org> +Date: Wed Jan 9 12:42:35 2008 -0500 + + Remove superfluous preprocessor conditionals from LM73 driver + + (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE". + + (2) Use conditional Makefile.o. + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit efc6f447c1b940d1650c4b854c5598a595ddc3da +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Thu Jan 10 17:59:07 2008 +0100 + + Add support for the TK885D baseboard from TELE-DATA + + The TK885D board uses a TQM885D module from TQ, this port adds an + own configuration file and adds a last_stage_init() method to + configure the two PHYs, depending on the phy_auto_nego environment + variable. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 10 02:22:05 2008 -0600 + + Fix compiler warning + + main.c: In function 'readline_into_buffer': + main.c:927: warning: unused variable 'p_buf' + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit bed53753dd1d7e6bcbea4339be0fb7760214cc35 +Author: Anatolij Gustschin <agust@denx.de> +Date: Fri Jan 11 14:30:01 2008 +0100 + + Add Fujitsu CoralP/Lime video driver + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + +commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058 +Author: Anatolij Gustschin <agust@denx.de> +Date: Fri Jan 11 02:39:47 2008 +0100 + + Fix video console newline and carriage return handling + + Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS + are not displayed correctly. This is an attempt to fix + this issue. Also add carriage return handling. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + +commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 11 15:53:58 2008 +0100 + + ppc4xx: Fix sdram init on Sequoia boards + + Clear possible errors in MCSR resulting from data-eye-search. + If not done, then we could get an interrupt later on when + exceptions are enabled. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d610a60730b7464f6f659db49d264d89a7c71061 +Author: Anatolij Gustschin <agust@denx.de> +Date: Fri Jan 11 15:31:09 2008 +0100 + + ppc4xx: Rework Lime support for lwmon5 + + Rework Lime support for lwmon5 using new video driver + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Fri Jan 11 14:55:16 2008 +0100 + + ppc4xx: Update PMC440 config file + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Fri Jan 11 14:55:08 2008 +0100 + + ppx4xx: Fix sdram init on PMC440 boards + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 061aad4d320dddce26247699dcf2875ee2ea1366 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:09:33 2008 +0800 + + mpc83xx: Fix the bug of 266MHz data rate DDR + + The DDR doesn't work on the 266MHz data rate, + the patch fix the bug. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit ded08317ad9e340b887bf2eb46e9565a0f610a93 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:08:26 2008 +0800 + + mpc83xx: Make the code more readable + + Format the code, make it more readable + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:07:23 2008 +0800 + + mpc83xx: Reduce the latency of DDR + + Reduce the AL from 2 to 1 clock to improve the performance. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:06:05 2008 +0800 + + mpc83xx: Fix the wrong definition of MPC8315E + + According to the latest user manual of MPC8315E, + 1) The SVCOD of HRCWL is different than 837x + 2) The SCCR has changes + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit ec2638ea08a537a1bd409db873aaaa33a053ebae +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:05:00 2008 +0800 + + mpc83xx: Fix the typo in mpc83xx.h + + The SPCR about TSEC priority is wrong. + + Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com> + Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:04:13 2008 +0800 + + mpc83xx: Fix the typo in global data struct + + Fix the typo in global_data.h + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 2c5b48fc205c3e2752910da8f39209ed075929e5 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Jan 10 23:03:03 2008 +0800 + + mpc83xx: Remove cache config from config.h + + clean up the cache config from configs.h of board + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit fab6f556bbbbd1bb35a5433161f7f173c18df559 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Jan 9 20:57:47 2008 +0300 + + mpc83xx: add support for the MPC8360E-RDK + + This is MPC8360E based board with: + - 256MB fixed SDRAM; + - 8MB Intel Strata NOR flash; + - StMICRO 64MiB NAND flash; + - two 10/100/1000 ethernet ports connected via Broadcom + BCM5481 PHYs; + - two 10/100 ethernet ports connected via National + DP83848 PHYs; + - one PCI and one miniPCI slots; + - four serial ports (two NS16550-compatible, two UCCs); + - four USB ports working through MPC8360E "FHCI" USB controller; + - Fujitsu MB86277 graphics controller; + - Analog to Digital Converter/Touchscreen controller, AD7843 + connected to SPI. + + Features not supported in this patch are: + - StMICRO 64MiB NAND flash (patch sent); + - MINT framebuffer initialization (patch is pending); + - Fetching production information from the EEPROM via I2C; + - FHCI USB; + - Two slow UCCs used as RS-485 UARTs. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Wed Jan 9 20:57:40 2008 +0300 + + mpc83xx: add "fsl, qe" compatible fixups + + New device trees will use "fsl,qe" compatible properties. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 977b57583a7c34010e566a09a679ec3c1836f996 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jan 9 15:24:06 2008 -0600 + + mpc83xx: add missing CONFIG_HAS_ETH0 defines + + the new libfdt code only updates eth0 if CONFIG_HAS_ETH0 + is defined; add the define to the missing board configs. + + Thanks to Emilian Medve for finding this. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b830b7f1635984ba607219fcbd78597c28eeb529 +Author: Becky Bruce <bgill@freescale.com> +Date: Thu Jan 10 14:00:28 2008 -0600 + + 86xx: Support 2GB DIMMs + + Configure the number of bits used to address the banks inside the SDRAM + device. The default register value of 0 means 2 bits to address 4 banks. + Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks. + + Signed-off-by: Becky Bruce <bgill@freescale.com> + +commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Thu Jan 10 18:50:33 2008 +0100 + + ppc4xx: Make Sequoia boot vxWorks + + vxWorks expects in + TLB 0 a entry for the Machine Check interrupt + TLB 1 a entry for the RAM + TLB 2 a entry for the EBC + TLB 3 a entry for the boot flash + + After changing the baudrate to 9600 I had no problems to boot the + vxWorks image as distributed by WindRiver (Revision 2.0/1 from + June 18, 2007) + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d +Author: Larry Johnson <lrj@arlinx.com> +Date: Wed Jan 9 23:10:27 2008 -0500 + + ppc4xx: Fix dflush() to restore DVLIM register + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit 252f60b068d1f94190b5bcfda169db582387e15e +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Jan 10 03:52:44 2008 -0500 + + Nios2: remove common/cmd_bdinfo.c unused variable. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Scott McNutt <smcnutt@psyent.com> + +commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Wed Jan 9 18:15:53 2008 -0500 + + Fix Ethernet init() return codes + + Change return values of init() functions in all Ethernet drivers to conform + to the following: + + >=0: Success + <0: Failure + + All drivers going forward should return 0 on success. Current drivers that + return 1 on success were left as-is to minimize changes. + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + Acked-by: Stefan Roese <sr@denx.de> + Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + Acked-By: Timur Tabi <timur@freescale.com> + +commit d3a6532cbe263d992f49e86ac95bede28e96f9c8 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jan 10 00:55:14 2008 +0100 + + Coding Style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7 Author: Kim Phillips <kim.phillips@freescale.com> Date: Wed Jan 9 16:56:54 2008 -0600 @@ -273,6 +638,16 @@ Date: Wed Jan 9 19:39:36 2008 +0100 Signed-off-by: Rafal Jaworowski <raj@semihalf.com> +commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Jan 9 12:14:55 2008 -0600 + + 86xx: Remove cache config from configs.h + + Just use the standard defines in asm/cache.h. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + commit 26a41790f8eba19ad450e18ae91351daf485b3e2 Author: Rafal Jaworowski <raj@semihalf.com> Date: Wed Jan 9 18:05:27 2008 +0100 @@ -284,6 +659,29 @@ Date: Wed Jan 9 18:05:27 2008 +0100 Signed-off-by: Rafal Zabdyr <armo@semihalf.com> +commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f +Author: Jon Loeliger <jdl@freescale.com> +Date: Fri Jan 4 12:07:27 2008 -0600 + + Convert MPC8610HPCD to use libfdt. + + Assumes the presence of the aliases node in the DTS to + locate the pci and serial nodes for fixups. + + Use consistent fdtaddr and fdtfile in environment variables. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60 +Author: Jon Loeliger <jdl@freescale.com> +Date: Fri Jan 4 11:58:23 2008 -0600 + + 8610: Fix lingering compile warnings. + + Turn off DEBUG. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + commit 6007f3251c0967adc13f2ed8be1b924ddc30124d Author: Wolfgang Denk <wd@denx.de> Date: Wed Jan 9 15:14:46 2008 +0100 diff --git a/MAINTAINERS b/MAINTAINERS index 72429ac04..05a2ec64b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -343,6 +343,11 @@ Travis Sawyer (travis.sawyer@sandburst.com> METROBOX PPC440GX XPEDITE1K PPC440GX +Heiko Schocher <hs@denx.de> + + mgcoge MPC8247 + mgsuvd MPC866 + Peter De Schrijver <p2@mind.be> ML2 PPC4xx |