diff options
| -rw-r--r-- | cpu/mpc85xx/Makefile | 1 | ||||
| -rw-r--r-- | cpu/mpc85xx/cpu.c | 2 | ||||
| -rw-r--r-- | cpu/mpc85xx/start.S | 49 | ||||
| -rw-r--r-- | drivers/misc/fsl_law.c | 2 | ||||
| -rw-r--r-- | include/asm-ppc/immap_85xx.h | 13 | ||||
| -rw-r--r-- | include/asm-ppc/immap_qe.h | 8 | ||||
| -rw-r--r-- | include/asm-ppc/processor.h | 2 |
7 files changed, 72 insertions, 5 deletions
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index 99d88a888..880930296 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -49,6 +49,7 @@ COBJS-$(CONFIG_MPC8544) += ddr-gen2.o COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o +COBJS-$(CONFIG_MPC8569) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \ diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 5b72fe544..ef976a43f 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -61,6 +61,8 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(8567, 8567_E), CPU_TYPE_ENTRY(8568, 8568), CPU_TYPE_ENTRY(8568, 8568_E), + CPU_TYPE_ENTRY(8569, 8569), + CPU_TYPE_ENTRY(8569, 8569_E), CPU_TYPE_ENTRY(8572, 8572), CPU_TYPE_ENTRY(8572, 8572_E), CPU_TYPE_ENTRY(P2020, P2020), diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 89eea8cbe..4f7236fc3 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -186,6 +186,55 @@ _start_e500: mtspr DBCR0,r0 #endif +#ifdef CONFIG_MPC8569 +#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000) +#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0) + + /* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to + * use address space which is more than 12bits, and it must be done in + * the 4K boot page. So we set this bit here. + */ + + /* create a temp mapping TLB0[0] for LBCR */ + lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h + ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l + + lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h + ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l + + lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h + ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l + + lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, + (MAS3_SX|MAS3_SW|MAS3_SR))@l + + mtspr MAS0,r6 + mtspr MAS1,r7 + mtspr MAS2,r8 + mtspr MAS3,r9 + isync + msync + tlbwe + + /* Set LBCR register */ + lis r4,CONFIG_SYS_LBCR_ADDR@h + ori r4,r4,CONFIG_SYS_LBCR_ADDR@l + + lis r5,CONFIG_SYS_LBC_LBCR@h + ori r5,r5,CONFIG_SYS_LBC_LBCR@l + stw r5,0(r4) + isync + + /* invalidate this temp TLB */ + lis r4,CONFIG_SYS_LBC_ADDR@h + ori r4,r4,CONFIG_SYS_LBC_ADDR@l + tlbivax 0,r4 + isync + +#endif /* CONFIG_MPC8569 */ + /* create a temp mapping in AS=1 to the 4M boot window */ lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 58340c16b..be43a3ecf 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) #define FSL_HW_NUM_LAWS 8 #elif defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \ - defined(CONFIG_MPC8568) || \ + defined(CONFIG_MPC8568) || defined(CONFIG_MPC8569) || \ defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610) #define FSL_HW_NUM_LAWS 10 #elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \ diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 094fb9c5d..0810b8ef7 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1609,8 +1609,19 @@ typedef struct ccsr_gur { char res2[12]; uint gpiocr; /* 0xe0030 - GPIO control register */ char res3[12]; +#if defined(CONFIG_MPC8569) + uint plppar1; + /* 0xe0040 - Platform port pin assignment register 1 */ + uint plppar2; + /* 0xe0044 - Platform port pin assignment register 2 */ + uint plpdir1; + /* 0xe0048 - Platform port pin direction register 1 */ + uint plpdir2; + /* 0xe004c - Platform port pin direction register 2 */ +#else uint gpoutdr; /* 0xe0040 - General-purpose output data register */ char res4[12]; +#endif uint gpindr; /* 0xe0050 - General-purpose input data register */ char res5[12]; uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */ @@ -1651,7 +1662,7 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ -#ifdef CONFIG_MPC8568 +#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569) char res10b[76]; par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ char res10c[3136]; diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h index 39da3771c..66a4735dd 100644 --- a/include/asm-ppc/immap_qe.h +++ b/include/asm-ppc/immap_qe.h @@ -20,7 +20,9 @@ typedef struct qe_iram { u32 iadd; /* I-RAM Address Register */ u32 idata; /* I-RAM Data Register */ - u8 res0[0x78]; + u8 res0[0x4]; + u32 iready; + u8 res1[0x70]; } __attribute__ ((packed)) qe_iram_t; /* QE Interrupt Controller @@ -580,7 +582,7 @@ typedef struct qe_immap { u8 res14[0x300]; u8 res15[0x3A00]; u8 res16[0x8000]; /* 0x108000 - 0x110000 */ -#if defined(CONFIG_MPC8568) +#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569) u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */ u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */ #else @@ -592,7 +594,7 @@ typedef struct qe_immap { extern qe_map_t *qe_immr; -#if defined(CONFIG_MPC8568) +#if defined(CONFIG_MPC8568) || defined(CONFIG_MPC8569) #define QE_MURAM_SIZE 0x10000UL #elif defined(CONFIG_MPC8360) #define QE_MURAM_SIZE 0xc000UL diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 5b29de0fd..83e3581f3 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -955,6 +955,8 @@ #define SVR_8567_E 0x807E00 #define SVR_8568 0x807500 #define SVR_8568_E 0x807D00 +#define SVR_8569 0x808000 +#define SVR_8569_E 0x808800 #define SVR_8572 0x80E000 #define SVR_8572_E 0x80E800 #define SVR_P2020 0x80E200 |