diff options
| -rw-r--r-- | include/configs/socrates.h | 20 | 
1 files changed, 15 insertions, 5 deletions
| diff --git a/include/configs/socrates.h b/include/configs/socrates.h index c3ecd6f40..23ed87f33 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -206,6 +206,16 @@  #define CONFIG_RTC_RX8025		/* Use Epson rx8025 rtc via i2c	*/  #define CFG_I2C_RTC_ADDR	0x32	/* at address 0x32		*/ +/* I2C temp sensor */ +/* Socrates uses Maxim's	DS75, which is compatible with LM75 */ +#define CONFIG_DTT_LM75		1 +#define CONFIG_DTT_SENSORS	{4}		/* Sensor addresses	*/ +#define CFG_DTT_MAX_TEMP	125 +#define CFG_DTT_LOW_TEMP	-55 +#define CFG_DTT_HYSTERESIS	3 +#define CFG_EEPROM_PAGE_WRITE_ENABLE	/* necessary for the LM75 chip */ +#define CFG_EEPROM_PAGE_WRITE_BITS	4 +  /* RapidIO MMU */  #define CFG_RIO_MEM_BASE	0xc0000000	/* base address		*/  #define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE @@ -226,7 +236,6 @@  #define CFG_PCI1_IO_SIZE	0x01000000	/* 16M			*/  #if defined(CONFIG_PCI) -  #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/  #define CONFIG_EEPRO100 @@ -293,7 +302,7 @@  #define CONFIG_CMD_DATE  #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_DTT +#define CONFIG_CMD_DTT  #undef CONFIG_CMD_EEPROM  #define CONFIG_CMD_I2C  #define CONFIG_CMD_MII @@ -360,9 +369,10 @@  #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/  #define	CONFIG_EXTRA_ENV_SETTINGS					\ -	"bootfile=/tftpboot/socrates/uImage\0"				\ +	"bootfile=$hostname/uImage\0"					\  	"netdev=eth0\0"							\  	"consdev=ttyS0\0"						\ +	"hostname=socrates\0"						\  	"nfsargs=setenv bootargs root=/dev/nfs rw "			\  		"nfsroot=$serverip:$rootpath\0"				\  	"ramargs=setenv bootargs root=/dev/ram rw\0"			\ @@ -379,7 +389,7 @@  		"tftp ${fdt_addr_r} ${fdt_file}; "			\  		"run nfsargs addip addcons;"				\  		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\ -	"fdt_file=socrates/socrates.dtb\0"					\ +	"fdt_file=$hostname/socrates.dtb\0"					\  	"fdt_addr_r=B00000\0"						\  	"fdt_addr=FC1E0000\0"						\  	"rootpath=/opt/eldk/ppc_85xx\0"					\ @@ -387,7 +397,7 @@  	"kernel_addr_r=200000\0"					\  	"ramdisk_addr=FC200000\0"					\  	"ramdisk_addr_r=400000\0"					\ -	"load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0"		\ +	"load=tftp 100000 $hostname/u-boot.bin\0"		\  	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\  		"cp.b 100000 fffc0000 40000;"			        \  		"setenv filesize;saveenv\0"				\ |