diff options
89 files changed, 1309 insertions, 659 deletions
@@ -1,3 +1,91 @@ +commit 2d78074d2e806edc380c1464eb9e5df335ece65e +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 22 17:32:28 2007 +0200 + + ppc7xx: Update CPCI750 board + + This small CPCI750 update extends the board specific command + "show_config" to display the Marvell strapping registers and + extends the PCI IDE controller. + + Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Aug 15 11:55:35 2007 -0500 + + 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h + + Remove a leftover in net/tftp.c while we're at it. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Aug 15 12:20:40 2007 -0500 + + Move the MPC8641HPCN board under board/freescale. + + Minor path corrections needed to ensure buildability. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8662577fe36fdb6a44b55b998d9daac6392a736a +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Aug 15 11:46:22 2007 -0500 + + 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h + + Remove a leftover in net/tftp.c while we're at it. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 210f463c71917b7a4495c2103c228b9c179ae64d +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Wed Aug 15 11:13:15 2007 -0400 + + Fix where the #ifdef CFG_BOOTMAPSZ is placed. + + Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb + interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) + when it should have gone inside of the conditional. As a result, it + broke non-LIBFDT board builds. + + Also added a missing "not." to the comment. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Tue Aug 14 14:06:45 2007 -0500 + + Fix malloc size error in ahci_init_one. + + Typically this causes scsi init to corrupt the + devlist and break the coninfo command. + Fix a compiler size warning. + + Signed-off-by: Jason Jin <jason.jin@freescale.com> + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit b361acd64fd2525c081b9b288b0804efe209c0e9 +Author: ksi@koi8.net <ksi@koi8.net> +Date: Tue Aug 14 10:02:16 2007 -0700 + + TI DaVinci - fix unsupported %hhx format + + Signed-off-by: Sergey Kubushyn <ksi@koi8.net> + +commit f01dbb5424a81453c81190dd30e945891466f621 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Aug 14 18:42:36 2007 +0200 + + Coding style cleanup. Update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 Author: Andy Fleming <afleming@freescale.com> Date: Tue Aug 14 10:32:59 2007 -0500 @@ -20,6 +108,50 @@ Date: Tue Aug 14 15:40:00 2007 +0100 Supply spi interface in at45.c +commit 4ce846ec59f36b85d6644a769690ad3feb667575 +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 14 15:12:01 2007 +0200 + + POST: Fix merge problem + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 14 15:03:17 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 779e975117a75e91fcebe226a63104dbfb924ab1 +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 14 14:44:41 2007 +0200 + + ppc4xx: Add initial Zeus (PPC405EP) board support + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c5a172a5fd636c12467429e3f7910e53773979c6 +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 14 14:41:55 2007 +0200 + + POST: Add option for external ethernet loopback test + + When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST + is not done using an internal loopback connection, but by assuming + that an external loopback connector is plugged into the board. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit eb2b4010ae426245172988804ee8d9193fb41038 +Author: Stefan Roese <sr@denx.de> +Date: Tue Aug 14 14:39:44 2007 +0200 + + POST: Add ppc405 support to cache and UART POST + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c Author: Peter Pearse <peter.pearse@arm.com> Date: Tue Aug 14 10:46:32 2007 +0100 @@ -391,6 +523,17 @@ Date: Wed Jun 27 13:34:26 2007 +0200 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> +commit 273db7e1bdd1937e32f1d4507321bb721ebd3118 +Author: Stefan Roese <sr@denx.de> +Date: Mon Aug 13 09:05:33 2007 +0200 + + ppc4xx: Fix problem in PLL clock calculation + + This patch was originall provided by David Mitchell <dmitchell@amcc.com> + and fixes a bug in the PLL clock calculation. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b Author: Wolfgang Denk <wd@denx.de> Date: Sun Aug 12 21:34:50 2007 +0200 @@ -849,6 +992,14 @@ Date: Thu Aug 2 14:42:20 2007 -0500 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> +commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42 +Author: Stefan Roese <sr@denx.de> +Date: Fri Aug 10 10:42:25 2007 +0200 + + Coding style cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f Author: Dirk Behme <dirk.behme@googlemail.com> Date: Thu Aug 2 17:42:08 2007 +0200 @@ -873,6 +1024,105 @@ Date: Thu Aug 2 17:41:14 2007 +0200 Signed-off-by: Dirk Behme <dirk.behme@gmail.com> +commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:31:22 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU5 files + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 6e5de26c6e7580faf16e87745cd488b92b492d0c +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:30:33 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU4 files + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit e8397fc78c9394d71de233a4d810fbc9047e4c76 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:38:26 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: common files + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit ac982ea5a4f2f993efcf52dca122f5a59df047d8 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:28:44 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: make related + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 137fdd9f474ecb853efdace5200576308c67f18d +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:28:03 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU5 config + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:27:15 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: HCU4 config + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:25:31 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: READMEs + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 641cca9569ce351ddb287fd3343d8b1dcb591db4 +Author: Niklaus Giger <niklausgiger@gmx.ch> +Date: Fri Jul 27 11:37:40 2007 +0200 + + Add PPC4xx-HCU4 and HCU5 boards: Infrastructure + + This series of patches adds support for 2 boards from Netstal Maschinen. + + The HCU4 has a PPC405Gpr and + the HCU5 has a PPC440EPX. + + The HCU4 has a somehow complicated flash setup, as the booteprom is + only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more + elegant solution. + + The HCU5 has only a booteprom as the whole code will be downloaded from a + different board which has HD, CD-ROM, etc and where all code is stored. + + This is my third try. I incorporated all suggestions made by Wolfgang and Stefan. + Thanks them a lot. + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + +commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171 +Author: Stefan Roese <sr@denx.de> +Date: Fri Aug 10 08:42:55 2007 +0200 + + ppc4xx: Update lwmon5 POST configuration + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Fri Aug 10 08:25:22 2007 +0200 + + POST: Add ppc4xx UART POST support without external uart clock (lwmon5) + + The patch adds support for UART POST on ppc44x-based boards with no + external serial clocks installed. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + Acked-by: Stefan Roese <sr@denx.de> + commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f Author: Kim Phillips <kim.phillips@freescale.com> Date: Mon Aug 6 18:18:34 2007 -0500 @@ -1169,6 +1419,17 @@ Date: Mon Aug 6 23:21:05 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit 537223afa61f64480df31ce440a9cb386df4a814 +Author: Stefan Roese <sr@denx.de> +Date: Mon Aug 6 21:10:17 2007 +0200 + + ppc4xx: Update AMCC Bamboo README doc/README.bamboo + + As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>, + here an updated Bamboo README. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 9c7e4b06214db61bb21f1bcbe57c97519669baae Author: Wolfgang Denk <wd@denx.de> Date: Mon Aug 6 02:17:36 2007 +0200 @@ -1316,6 +1577,42 @@ Date: Thu Aug 2 10:11:18 2007 +0200 Minor cleanup of <board>_nand build rules. +commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef +Author: Stefan Roese <sr@denx.de> +Date: Thu Aug 2 08:33:56 2007 +0200 + + ppc4xx: Code cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c92409812206ac67a7fa7aae298539a9c3804a46 +Author: Grzegorz Bernacki <gjb@semihalf.com> +Date: Tue Jul 31 18:51:48 2007 +0200 + + [ppc440SPe] Graceful recovery from machine check during PCIe configuration + + During config transactions on the PCIe bus an attempt to scan for a + non-existent device can lead to a machine check exception with certain + peripheral devices. In order to avoid crashing in such scenarios the + instrumented versions of the config cycle read routines are introduced, so + the exceptions fixups framework can gracefully recover. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Acked-by: Rafal Jaworowski <raj@semihalf.com> + +commit dec99558b9ea75a37940d07f41a3565a50b54ad1 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Tue Jul 31 18:19:54 2007 +0200 + + [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A + + This brings back separate settings for PCIe bus numbers depending on chip + revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa + commit. 440SPe rev. A does NOT work properly with the same settings as for + the rev. B (no devices are seen on the bus during enumeration). + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 Author: Wolfgang Denk <wd@denx.de> Date: Thu Aug 2 00:48:45 2007 +0200 @@ -1324,6 +1621,55 @@ Date: Thu Aug 2 00:48:45 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68 +Author: Eugene OBrien <eugene.obrien@advantechamt.com> +Date: Tue Jul 31 10:24:56 2007 +0200 + + ppc4xx: Update AMCC Bamboo 440EP support + + Changed storage type of cfg_simulate_spd_eeprom to const + Changed storage type of gpio_tab to stack storage + (Cannot access global data declarations in .bss until afer code relocation) + + Improved SDRAM tests to catch problems where data is not uniquely addressable + (e.g. incorrectly programmed SDRAM row or columns) + + Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules + Fixed AM29LV320DT (OpCode Flash) sector map + + Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574 +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 31 08:37:01 2007 +0200 + + ppc4xx: Update 440EPx lwmon5 board support + + - Clear ECC status regs after ECC POST test + - Set dcbz for ECC generation with caches enabled as default + - Code cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 30 11:04:57 2007 +0200 + + ppc4xx: Only print ECC related info when the error bis are set + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e36220a4baf1f188ba60f17e9d0f043069b1362a +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Fri Jul 27 16:44:31 2007 +0200 + + new FPGA image for PLU405 board + + new FPGA image for PLU405 board with improved CompactFlash timing + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 Author: Rafal Jaworowski <raj@semihalf.com> Date: Fri Jul 27 14:43:59 2007 +0200 @@ -1351,6 +1697,73 @@ Date: Fri Jul 27 14:22:04 2007 +0200 Signed-off-by: Rafal Jaworowski <raj@semihalf.com> +commit d4024bb72dd81695ec099b2199eda0d27c623e62 +Author: John Otken <john@softadvances.com> +Date: Thu Jul 26 17:49:11 2007 +0200 + + ppc4xx: Add support for AMCC 405EP Taihu board + + Signed-off-by: John Otken <john@softadvances.com> + +commit b66091de6c7390620312c2501db23d8391e7cabb +Author: Anatolij Gustschin <agust@denx.de> +Date: Thu Jul 26 15:08:01 2007 +0200 + + ppc4xx: lwmon5: Update Lime initialization + + Change Lime SDRAM initialization to now support 100MHz and + 133MHz (if enabled). Also the framebuffer is initialized to + display a blue rectangle with a white border. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9f24a808f17fc0f37b7fb4805f734741335caecc +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 24 09:52:52 2007 +0200 + + ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added + + The used Intel NOR FLASH chips have internally two dies, and are now + treated as two seperate chips. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit aedf5bde179ecfbd0a96130d18996a96518b785f +Author: Stefan Roese <sr@denx.de> +Date: Tue Jul 24 07:20:09 2007 +0200 + + ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...) + + As suggested by Hakan Eryigit, here an updated setup for the lwmon5 + interrupt controller. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a71d96eac8130b53a91f93cd10c70fca0db18d52 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 20 15:03:44 2007 +0200 + + ppc4xx: Fix bug with default GPIO output value + + As spotted by Matthias Fuchs, the default output values for all GPIO1 + outputs were not setup correctly. This patch fixes this issue. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 531e3e8b831f357056448fa573137d5fb37000fd +Author: Pavel Kolesnikov <concord@emcraft.com> +Date: Fri Jul 20 15:03:03 2007 +0200 + + POST: Add ECC POST for the lwmon5 board + + This patch adds ECC Post test for the Lwmon5 board based + on PPC440EPx to U-Boot. + + Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> + Acked-by: Yuri Tikhonov <yur@emcraft.com> + Acked-by: Stefan Roese <sr@denx.de> + commit cc3023b9f95d7ac959a764471a65001062aecf41 Author: Rafal Jaworowski <raj@semihalf.com> Date: Thu Jul 19 17:12:28 2007 +0200 @@ -1362,6 +1775,58 @@ Date: Thu Jul 19 17:12:28 2007 +0200 Signed-off-by: Rafal Jaworowski <raj@semihalf.com> +commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 16 10:02:12 2007 +0200 + + ppc4xx: Code cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 16 10:01:38 2007 +0200 + + ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 16 10:00:43 2007 +0200 + + ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c + + The new boardspecific DDR2 controller configuration is used for the Yucca + board. Now the Yucca board with 440SPe Rev. A chips is also supported. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 16 09:57:00 2007 +0200 + + ppc4xx: Add new weak functions to support boardspecific DDR2 configuration + + The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better + support non default, boardspecific DDR(2) controller configuration. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5743a9207a370b90f09b20ebd61167c806b937f3 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 16 08:53:51 2007 +0200 + + ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup + + The new function remove_tlb() can be used to remove the TLB's used to + map a specific memory region. This is especially useful for the DDR(2) + setup routines which configure the SDRAM area temporarily as a cached + area (for speedup on auto-calibration and ECC generation) and later + need this area uncached for normal usage. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 3a6cab844cf74f76639d795e0be8717e02c86af7 Author: Wolfgang Denk <wd@denx.de> Date: Sat Jul 14 22:51:02 2007 +0200 @@ -1393,6 +1858,17 @@ Date: Fri Jul 13 08:26:05 2007 +0200 Signed-off-by: Heiko Schocher <hs@denx.de> +commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jul 12 16:32:08 2007 +0200 + + ppc4xx: Change receive buffer handling in the 4xx emac driver + + This change fixes a bug in the receive buffer handling, that + could lead to problems upon high network traffic (broadcasts...). + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 Author: Wolfgang Denk <wd@denx.de> Date: Thu Jul 12 01:45:34 2007 +0200 @@ -1975,6 +2451,50 @@ Date: Tue Jul 10 00:01:28 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit c8603cfbd4573379a6076c9c208545ba2bbf019a +Author: Stefan Roese <sr@denx.de> +Date: Mon Jul 9 11:00:24 2007 +0200 + + Small coding style cleanup + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Mon Jul 9 10:10:08 2007 +0200 + + Migrate esd 405EP boards to new NAND subsystem + + Remove unused CFG_NAND_LEGACY define + + These boards to not have NAND. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Mon Jul 9 10:10:06 2007 +0200 + + Migrate esd 405EP boards to new NAND subsystem + + Migrate esd 405EP boards to new NAND subsystem + + -cleanup + -use correct io accessors (in/out_be32()) + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit e09f7ab5749c345f924da272bea0521a73af5b11 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Mon Jul 9 10:10:04 2007 +0200 + + Migrate esd 405EP boards to new NAND subsystem + + This patch prepares the migration from the legacy NAND driver + to U-Boot's new NAND subsystem for esd boards. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + commit c3517f919d0f61650cf3027fd4faf0f631142f6c Author: Jon Loeliger <jdl@freescale.com> Date: Sun Jul 8 18:10:08 2007 -0500 @@ -2162,6 +2682,41 @@ Date: Thu Jul 5 19:13:52 2007 -0500 Signed-off-by: Jon Loeliger <jdl@freescale.com> +commit 10e038932f22ee80ebd53de312531e70e6590a2f +Author: Thomas Knobloch <knobloch@siemens.com> +Date: Fri Jul 6 14:58:39 2007 +0200 + + [NAND] Bad block skipping for command nboot + + The old implementation of command nboot does not support reading the image from + NAND flash with skipping of bad blocks. The patch implements a new version of + the nboot command: by calling nboot.jffs2 from the u-boot command line the + command will load the image from NAND flash with respect to bad blocks (by using + nand_read_opts()). This is similar to e.g. the NAND read command: "nand + read.jffs2 ...". + + Signed-off-by: Thomas Knobloch <knobloch@siemens.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 6 12:26:51 2007 +0200 + + ppc4xx: Update lwmon5 default environment + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5d187430a055d62f17ca84d75e7245439d1f7e75 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 6 11:48:24 2007 +0200 + + ppc4xx: Update lwmon5 board + + Add unlock=yes environment variable to default variables to unlock + the CFI flash by default. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e Author: Stefan Roese <sr@denx.de> Date: Fri Jul 6 09:45:47 2007 +0200 @@ -3151,6 +3706,18 @@ Date: Fri Jun 22 14:58:04 2007 +0200 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup +commit d677b32855f577ae2690dcd64a172cdd706e0ffc +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Jun 22 10:34:12 2007 +0200 + + [patch] add nand_init() prototype to nand.h + + since nand_init() is expected to be called by other parts of u-boot, there + should be a prototype for it in nand.h + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Stefan Roese <sr@denx.de> + commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b Author: Wolfgang Denk <wd@denx.de> Date: Wed Jun 20 18:14:24 2007 +0200 @@ -3767,6 +4334,16 @@ Date: Sun May 27 16:51:48 2007 +0200 Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com> +commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b +Author: Ulf Samuelsson <ulf@atmel.com> +Date: Thu May 24 12:12:47 2007 +0200 + + [PATCH][NAND] Define the Vendor Id for Micron NAND Flash + + Signed-off-by: Ulf Samuelsson <ulf@atmel.com> + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + Signed-off-by: Stefan Roese <sr@denx.de> + commit d756894722c888d09a9fa1df8323753772d3dcce Author: Stefan Roese <sr@denx.de> Date: Thu May 24 09:49:00 2007 +0200 diff --git a/MAINTAINERS b/MAINTAINERS index 3371e0f58..66f00403c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -162,12 +162,12 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com> VOH405 PPC405EP VOM405 PPC405EP WUH405 PPC405EP - CMS700 PPC405EP + CMS700 PPC405EP Niklaus Giger <niklaus.giger@netstal.com> - HCU4 PPC405GPr - HCU5 PPC440EPx + HCU4 PPC405GPr + HCU5 PPC440EPx Frank Gottschling <fgottschling@eltec.de> @@ -308,6 +308,7 @@ Stefan Roese <sr@denx.de> ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP + rainier PPC440GRx sequoia PPC440EPx sycamore PPC405GPr taishan PPC440GX @@ -204,6 +204,7 @@ LIST_4xx=" \ PLU405 \ PMC405 \ PPChameleonEVB \ + rainier \ sbc405 \ sc3 \ sequoia \ @@ -359,6 +360,12 @@ LIST_74xx=" \ ZUMA \ " +LIST_TSEC=" \ + ${LIST_85xx} \ + ${LIST_86xx} \ + ${LIST_83xx} \ +" + LIST_7xx=" \ BAB7xx \ CPCI750 \ @@ -673,7 +680,7 @@ do mips|mips_el| \ nios|nios2| \ ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \ - x86|I486) + x86|I486|TSEC) for target in `eval echo '$LIST_'${arg}` do build_target ${target} diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index 6fc60eaaa..f3803c09f 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -26,76 +26,185 @@ #include <command.h> #include <i2c.h> -static u8 boot_533_nor[] = { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 -}; +/* + * There are 2 versions of production Sequoia & Rainier platforms. + * The primary difference is the reference clock. Those with + * 33333333 reference clocks will also have 667MHz rated + * processors. Not enough differences to have unique clock + * settings. + * + * NOR and NAND boot options change bytes 6, 7, 8, 9, 11. The + * values are independent of the rest of the clock settings. + * + * All Sequoias & Rainiers select from two possible EEPROMs in Boot + * Config F. One for 33MHz PCI, one for 66MHz PCI. The following + * values are for the 33MHz PCI configuration. Byte 5 (0 base) is + * the only value affected for a 66MHz PCI and simply needs a +0x10. + */ + +#define NAND_COMPATIBLE 0x01 +#define NOR_COMPATIBLE 0x02 + +/* check with Stefan on CFG_I2C_EEPROM_ADDR */ +#define I2C_EEPROM_ADDR 0x52 -static u8 boot_533_nand[] = { - 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +static char *config_labels[] = { + "CPU: 333 PLB: 133 OPB: 66 EBC: 66", + "CPU: 333 PLB: 166 OPB: 83 EBC: 55", + "CPU: 400 PLB: 133 OPB: 66 EBC: 66", + "CPU: 400 PLB: 160 OPB: 80 EBC: 53", + "CPU: 416 PLB: 166 OPB: 83 EBC: 55", + "CPU: 500 PLB: 166 OPB: 83 EBC: 55", + "CPU: 533 PLB: 133 OPB: 66 EBC: 66", + "CPU: 667 PLB: 166 OPB: 83 EBC: 55", + NULL }; -static u8 boot_667_nor[] = { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, - 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 +static u8 boot_configs[][17] = { + { + (NOR_COMPATIBLE), + 0x84, 0x70, 0xa2, 0xa6, 0x05, 0x57, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x86, 0x78, 0xc2, 0xc6, 0x05, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x86, 0x78, 0xc2, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NOR_COMPATIBLE), + 0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + (NAND_COMPATIBLE | NOR_COMPATIBLE), + 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40, + 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + }, + { + 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + } }; -static u8 boot_667_nand[] = { - 0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10, - 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 +/* + * Bytes 6,8,9,11 change for NAND boot + */ +static u8 nand_boot[] = { + 0xd0, 0xa0, 0x68, 0x58 }; static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - u8 chip; - u8 *buf; - int cpu_freq; + u8 *buf, bNAND; + int x, y, nbytes, selcfg; + extern char console_buffer[]; - if (argc < 3) { + if (argc < 2) { printf("Usage:\n%s\n", cmdtp->usage); return 1; } - cpu_freq = simple_strtol(argv[1], NULL, 10); - if (!((cpu_freq == 533) || (cpu_freq == 667))) { - printf("Unsupported cpu-frequency - only 533 and 667 supported\n"); + if ((strcmp(argv[1], "nor") != 0) && + (strcmp(argv[1], "nand") != 0)) { + printf("Unsupported boot-device - only nor|nand support\n"); return 1; } - /* use 0x52 as I2C EEPROM address for now */ - chip = 0x52; + /* set the nand flag based on provided input */ + if ((strcmp(argv[1], "nand") == 0)) + bNAND = 1; + else + bNAND = 0; - if ((strcmp(argv[2], "nor") != 0) && - (strcmp(argv[2], "nand") != 0)) { - printf("Unsupported boot-device - only nor|nand support\n"); - return 1; - } + printf("Available configurations: \n\n"); - if (strcmp(argv[2], "nand") == 0) { - switch (cpu_freq) { - default: - case 533: - buf = boot_533_nand; - break; - case 667: - buf = boot_667_nand; - break; + if (bNAND) { + for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { + /* filter on nand compatible */ + if (boot_configs[x][0] & NAND_COMPATIBLE) { + printf(" %d - %s\n", (y+1), config_labels[x]); + y++; + } } } else { - switch (cpu_freq) { - default: - case 533: - buf = boot_533_nor; - break; - case 667: - buf = boot_667_nor; - break; + for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { + /* filter on nor compatible */ + if (boot_configs[x][0] & NOR_COMPATIBLE) { + printf(" %d - %s\n", (y+1), config_labels[x]); + y++; + } } } - if (i2c_write(chip, 0, 1, buf, 16) != 0) - printf("Error writing to EEPROM at address 0x%x\n", chip); + do { + nbytes = readline(" Selection [1-x / quit]: "); + + if (nbytes) { + if (strcmp(console_buffer, "quit") == 0) + return 0; + selcfg = simple_strtol(console_buffer, NULL, 10); + if ((selcfg < 1) || (selcfg > y)) + nbytes = 0; + } + } while (nbytes == 0); + + + y = (selcfg - 1); + + for (x = 0; boot_configs[x][0] != 0; x++) { + if (bNAND) { + if (boot_configs[x][0] & NAND_COMPATIBLE) { + if (y > 0) + y--; + else if (y < 1) + break; + } + } else { + if (boot_configs[x][0] & NOR_COMPATIBLE) { + if (y > 0) + y--; + else if (y < 1) + break; + } + } + } + + buf = &boot_configs[x][1]; + + if (bNAND) { + buf[6] = nand_boot[0]; + buf[8] = nand_boot[1]; + buf[9] = nand_boot[2]; + buf[11] = nand_boot[3]; + } + + /* check CPLD register +5 for PCI 66MHz flag */ + if (in8(CFG_BCSR_BASE + 5) & 0x01) + buf[5] += 0x10; + + if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0) + printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR); udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); printf("Done\n"); @@ -105,7 +214,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - bootstrap, 3, 0, do_bootstrap, + bootstrap, 2, 0, do_bootstrap, "bootstrap - program the I2C bootstrap EEPROM\n", - "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" + "<nand|nor> - strap to boot from NAND or NOR flash\n" ); diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index 4d75868ea..308f752d0 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index f41eb7b22..8a5b03bce 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -33,6 +34,7 @@ #endif extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern void lxt971_no_sleep(void); /* fpga configuration data - gzip compressed and generated by bin2c */ const unsigned char fpgadata[] = @@ -164,18 +166,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +214,17 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} +#ifdef CONFIG_LXT971_NO_SLEEP + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); #endif +} diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index df487662f..0d4ab2d13 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + $(CPLD) \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 635ba2fdb..2cdd7be36 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -68,9 +69,9 @@ int board_early_init_f (void) /* * Reset CPLD via GPIO12 (CS3) pin */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET); udelay(1000); /* wait 1ms */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET); udelay(1000); /* wait 1ms */ return 0; @@ -94,13 +95,7 @@ int misc_init_r (void) /* * Setup and enable EEPROM write protection */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); - - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); return (0); } @@ -153,11 +148,6 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } @@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP)); break; } } @@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 62f6c2043..a76b00fe4 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -24,14 +24,12 @@ #include <common.h> -#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) -#warning CFG_NAND_LEGACY not defined in a file using the legacy NAND support! -#endif - #include <command.h> #include <image.h> #include <asm/byteorder.h> +#if defined(CFG_NAND_LEGACY) #include <linux/mtd/nand_legacy.h> +#endif #include <fat.h> #include <part.h> @@ -294,6 +292,8 @@ int au_do_update(int i, long sz) rc = nand_legacy_rw(nand_dev_desc, NANDRW_WRITE | NANDRW_JFFS2, start, nbytes, (size_t *)&total, (uchar *)addr); debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", rc, total, nbytes); +#else + rc = -1; #endif } if (rc != 0) { diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c new file mode 100644 index 000000000..7bf68473d --- /dev/null +++ b/board/esd/common/esd405ep_nand.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2007 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_CMD_NAND) +#include <asm/io.h> +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +static void esd405ep_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + switch(cmd) { + case NAND_CTL_SETCLE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE); + break; + case NAND_CTL_CLRCLE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE); + break; + case NAND_CTL_SETALE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE); + break; + case NAND_CTL_CLRALE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE); + break; + case NAND_CTL_SETNCE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE); + break; + case NAND_CTL_CLRNCE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE); + break; + } +} + + +/* + * read device ready pin + */ +static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo) +{ + if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY) + return 1; + return 0; +} + + +int board_nand_init(struct nand_chip *nand) +{ + /* + * Set NAND-FLASH GPIO signals to defaults + */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE); + + /* + * Initialize nand_chip structure + */ + nand->hwcontrol = esd405ep_nand_hwcontrol; + nand->dev_ready = esd405ep_nand_device_ready; + nand->eccmode = NAND_ECC_SOFT; + nand->chip_delay = NAND_BIG_DELAY_US; + nand->options = NAND_SAMSUNG_LP_OPTIONS; + return 0; +} +#endif diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 17e356894..298aa6a19 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -55,6 +55,71 @@ #define DP(x) #endif +static char show_config_tab[][15] = {{"PCI0DLL_2 "}, /* 31 */ + {"PCI0DLL_1 "}, /* 30 */ + {"PCI0DLL_0 "}, /* 29 */ + {"PCI1DLL_2 "}, /* 28 */ + {"PCI1DLL_1 "}, /* 27 */ + {"PCI1DLL_0 "}, /* 26 */ + {"BbEP2En "}, /* 25 */ + {"SDRAMRdDataDel"}, /* 24 */ + {"SDRAMRdDel "}, /* 23 */ + {"SDRAMSync "}, /* 22 */ + {"SDRAMPipeSel_1"}, /* 21 */ + {"SDRAMPipeSel_0"}, /* 20 */ + {"SDRAMAddDel "}, /* 19 */ + {"SDRAMClkSel "}, /* 18 */ + {"Reserved(1!) "}, /* 17 */ + {"PCIRty "}, /* 16 */ + {"BootCSWidth_1 "}, /* 15 */ + {"BootCSWidth_0 "}, /* 14 */ + {"PCI1PadsCal "}, /* 13 */ + {"PCI0PadsCal "}, /* 12 */ + {"MultiMVId_1 "}, /* 11 */ + {"MultiMVId_0 "}, /* 10 */ + {"MultiGTEn "}, /* 09 */ + {"Int60xArb "}, /* 08 */ + {"CPUBusConfig_1"}, /* 07 */ + {"CPUBusConfig_0"}, /* 06 */ + {"DefIntSpc "}, /* 05 */ + {0 }, /* 04 */ + {"SROMAdd_1 "}, /* 03 */ + {"SROMAdd_0 "}, /* 02 */ + {"DRAMPadCal "}, /* 01 */ + {"SInitEn "}, /* 00 */ + {0 }, /* 31 */ + {0 }, /* 30 */ + {0 }, /* 29 */ + {0 }, /* 28 */ + {0 }, /* 27 */ + {0 }, /* 26 */ + {0 }, /* 25 */ + {0 }, /* 24 */ + {0 }, /* 23 */ + {0 }, /* 22 */ + {"JTAGCalBy "}, /* 21 */ + {"GB2Sel "}, /* 20 */ + {"GB1Sel "}, /* 19 */ + {"DRAMPLL_MDiv_5"}, /* 18 */ + {"DRAMPLL_MDiv_4"}, /* 17 */ + {"DRAMPLL_MDiv_3"}, /* 16 */ + {"DRAMPLL_MDiv_2"}, /* 15 */ + {"DRAMPLL_MDiv_1"}, /* 14 */ + {"DRAMPLL_MDiv_0"}, /* 13 */ + {"GB0Sel "}, /* 12 */ + {"DRAMPLLPU "}, /* 11 */ + {"DRAMPLL_HIKVCO"}, /* 10 */ + {"DRAMPLLNP "}, /* 09 */ + {"DRAMPLL_NDiv_7"}, /* 08 */ + {"DRAMPLL_NDiv_6"}, /* 07 */ + {"CPUPadCal "}, /* 06 */ + {"DRAMPLL_NDiv_5"}, /* 05 */ + {"DRAMPLL_NDiv_4"}, /* 04 */ + {"DRAMPLL_NDiv_3"}, /* 03 */ + {"DRAMPLL_NDiv_2"}, /* 02 */ + {"DRAMPLL_NDiv_1"}, /* 01 */ + {"DRAMPLL_NDiv_0"}}; /* 00 */ + extern void flush_data_cache (void); extern void invalidate_l1_instruction_cache (void); extern flash_info_t flash_info[]; @@ -901,21 +966,37 @@ void board_prebootm_init () dcache_disable (); } - -int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { unsigned int reset_sample_low; unsigned int reset_sample_high; + unsigned int l, l1, l2; GT_REG_READ(0x3c4, &reset_sample_low); GT_REG_READ(0x3d4, &reset_sample_high); printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high); + l2 = 0; + for (l=0; l<63; l++) { + if (show_config_tab[l][0] != 0) { + printf("%14s:%1x ", show_config_tab[l], + ((reset_sample_low >> (31 - (l & 0x1f)))) & 0x01); + l2++; + if ((l2 % 4) == 0) + printf("\n"); + } else { + l1++; + } + if (l == 32) + reset_sample_low = reset_sample_high; + } + printf("\n"); + return(0); } U_BOOT_CMD( - show_cfg, 1, 1, do_show_cfg, - "show_cfg- Show Marvell strapping register\n", + show_config, 1, 1, do_show_config, + "show_config - Show Marvell strapping register\n", "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" ); diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index 01b90c631..0adafe2d0 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -43,6 +43,8 @@ int ide_preinit (void) ide_bus_offset[l] = -ATA_STATUS; } devbusfn = pci_find_device (0x1103, 0x0004, 0); + if (devbusfn == -1) + devbusfn = pci_find_device (0x1095, 0x3114, 0); if (devbusfn != -1) { status = 0; diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index ce7876c41..0e5e57a5a 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index 9ef5907cd..67b5d5406 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -5,7 +5,7 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -477,12 +477,6 @@ int misc_init_r (void) out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Reset touch-screen controller */ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST); @@ -690,20 +684,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - #if defined(CFG_EEPROM_WREN) /* Input: <dev_addr> I2C address of EEPROM device to enable. * <state> -1: deliver current state diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index 4d75868ea..308f752d0 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index dd3706e1a..25c8068fd 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -153,12 +153,6 @@ int misc_init_r (void) out32(GPIO0_OR, val); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * check board type and setup AP power */ str = getenv("bd_type"); /* this is only set on non prototype hardware */ @@ -242,33 +236,5 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index ce7876c41..0e5e57a5a 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 920f7178a..f026a7ac3 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -23,6 +23,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <command.h> #include <malloc.h> @@ -31,6 +32,8 @@ #define FPGA_DEBUG #endif +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -114,6 +117,10 @@ int misc_init_r (void) int index; int i; + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + dst = malloc(CFG_FPGA_MAX_SIZE); if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); @@ -177,18 +184,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -226,24 +227,10 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { @@ -262,31 +249,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - -#ifdef CONFIG_AUTO_UPDATE_SHOW -void board_auto_update_show(int au_active) -{ - if (au_active) { - printf("\n Dies ist die board-funktion: Updating!!!\n"); - } else { - printf("\n Dies ist die board-funktion: Updating done!!!\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index 4d75868ea..308f752d0 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 3e118e765..2857a0bef 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -195,12 +195,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -340,17 +334,3 @@ void ide_set_reset(int on) } } #endif /* CONFIG_IDE_RESET */ - - -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index 4d75868ea..308f752d0 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 61d1d6c0c..dba3ce888 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -170,12 +170,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +212,5 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - -/* ------------------------------------------------------------------------- */ - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/fads/fads.h b/board/fads/fads.h index c6f7ccde0..a7fe2e901 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -71,7 +71,10 @@ #undef CONFIG_BOOTARGS #undef CONFIG_WATCHDOG /* watchdog disabled */ + +#if !defined(CONFIG_MPC885ADS) #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#endif /* * New MPC86xADS and MPC885ADS provide two Ethernet connectivity options: diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index f906b859a..d4547e24c 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -57,7 +57,6 @@ void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); -#ifdef CONFIG_ADD_RAM_INFO static u32 is_ecc_enabled(void) { u32 val; @@ -87,7 +86,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif static int wait_for_dlllock(void) { diff --git a/board/netstal/common/flash.c b/board/netstal/common/hcu_flash.c index be2cb3773..be2cb3773 100644 --- a/board/netstal/common/flash.c +++ b/board/netstal/common/hcu_flash.c diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile index d9825a5f2..af90821fa 100644 --- a/board/netstal/hcu4/Makefile +++ b/board/netstal/hcu4/Makefile @@ -22,16 +22,20 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -vpath flash.c ../common -COBJS = $(BOARD).o flash.o +vpath hcu_flash.c ../common + +# NOBJS : Netstal common objects +NOBJS = hcu_flash.o +COBJS = $(BOARD).o SOBJS = -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +NOBJS := $(addprefix $(obj),$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(SOBJS) $(NOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index 2b9560484..48a3f13ba 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -43,7 +43,7 @@ enum { HW_GENERATION_MCU25 = 0x09, }; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); long int spd_sdram(int(read_spd)(uint addr)); #ifdef CONFIG_SPD_EEPROM @@ -121,22 +121,24 @@ int checkboard (void) printf ("HCU3: index %d\n\n", index); else if (generation == HW_GENERATION_HCU4) printf ("HCU4: index %d\n\n", index); - /* GPIO here noch nicht richtig initialisert !!! */ - sysLedSet(0); + hcu_led_set(0); for (j = 0; j < 7; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(50 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { u32 tmp = ~value; u32 *ledReg; @@ -243,9 +245,9 @@ long int fixed_hcu4_sdram (int board_type) } /*---------------------------------------------------------------------------+ - * getSerialNr + * hcu_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 hcu_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; @@ -265,7 +267,7 @@ int misc_init_r(void) char *s = getenv("ethaddr"); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = hcu_serial_number(); for (i = 0; i < 6; ++i) { gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile index eee310b1a..27398b905 100644 --- a/board/netstal/hcu5/Makefile +++ b/board/netstal/hcu5/Makefile @@ -22,16 +22,20 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -vpath flash.c ../common -COBJS = $(BOARD).o sdram.o flash.o +vpath hcu_flash.c ../common + +# NOBJS : Netstal common objects +NOBJS = hcu_flash.o +COBJS = $(BOARD).o sdram.o SOBJS = init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ../common/$(NOBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +NOBJS := $(addprefix $(obj),$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(SOBJS) $(NOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 23df0814f..b9b10fdc2 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -22,10 +22,11 @@ #include <asm/processor.h> #include <ppc440.h> #include <asm/mmu.h> +#include <net.h> DECLARE_GLOBAL_DATA_PTR; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; @@ -41,7 +42,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define SDR0_ECID2 0x0082 #define SDR0_ECID3 0x0083 -#define SYS_IO_ADDRESS 0xcce00000 +#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000) +#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000) #define DEFAULT_ETH_ADDR "ethaddr" /* ethaddr for first or etha1ddr for second ethernet */ @@ -182,11 +184,14 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_BOARD_PRE_INIT int board_pre_init(void) { return board_early_init_f(); } +#endif + int checkboard(void) { unsigned int j; @@ -211,38 +216,51 @@ int checkboard(void) printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); for (j = 0;j < 6; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(200 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return in16(SYS_IO_ADDRESS) & 0x3f; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { out16(SYS_IO_ADDRESS, value); } /*---------------------------------------------------------------------------+ - * getSerialNr + * get_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 get_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; if (*serial == 0xffffffff) - return get_ticks(); + return 0; return *serial; } /*---------------------------------------------------------------------------+ + * hcu_get_slot + *---------------------------------------------------------------------------*/ +u32 hcu_get_slot(void) +{ + u16 *slot = (u16 *)SYS_SLOT_ADDRESS; + return (*slot) & 0x7f; +} + + +/*---------------------------------------------------------------------------+ * misc_init_r. *---------------------------------------------------------------------------*/ int misc_init_r(void) @@ -250,7 +268,7 @@ int misc_init_r(void) char *s = getenv(DEFAULT_ETH_ADDR); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = get_serial_number(); unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; @@ -272,8 +290,7 @@ int misc_init_r(void) gd->bd->bi_enetaddr[2] = 0x13; gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; - /* byte[5].bit 0 must be zero */ - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; + gd->bd->bi_enetaddr[5] = hcu_get_slot(); sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], @@ -283,6 +300,25 @@ int misc_init_r(void) setenv(DEFAULT_ETH_ADDR, ethaddr); } + /* IP-Adress update */ + { + IPaddr_t ipaddr; + char *ipstring; + + ipstring = getenv("ipaddr"); + if (ipstring == 0) + ipaddr = string_to_ip("172.25.1.99"); + else + ipaddr = string_to_ip(ipstring); + if ((ipaddr & 0xff) != (32 + hcu_get_slot())) { + char tmp[22]; + + ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot(); + ip_to_string (ipaddr, tmp); + printf("%s: enforce %s\n", __FUNCTION__, tmp); + setenv("ipaddr", tmp); + } + } #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, @@ -346,6 +382,7 @@ int misc_init_r(void) return 0; } +#if defined(CONFIG_PCI) /************************************************************************* * pci_pre_init * @@ -358,7 +395,6 @@ int misc_init_r(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -411,7 +447,6 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -421,7 +456,6 @@ int pci_pre_init(struct pci_controller *hose) * may not be sufficient for a given board. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /*-------------------------------------------------------------+ @@ -478,13 +512,11 @@ void pci_target_init(struct pci_controller *hose) pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ /************************************************************************* * pci_master_init * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; @@ -499,8 +531,6 @@ void pci_master_init(struct pci_controller *hose) temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } -#endif -/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ /************************************************************************* * is_pci_host @@ -517,9 +547,8 @@ void pci_master_init(struct pci_controller *hose) * * ************************************************************************/ -#if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { return 1; } -#endif /* defined(CONFIG_PCI) */ +#endif /* defined(CONFIG_PCI) */ diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index 40391958d..9ee9ab599 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -36,7 +36,7 @@ #include <asm/mmu.h> #include <ppc440.h> -void sysLedSet(u32 value); +void hcu_led_set(u32 value); void dcbz_area(u32 start_address, u32 num_bytes); void dflush(void); @@ -70,7 +70,6 @@ void dflush(void); void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -99,7 +98,6 @@ void board_add_ram_info(int use_default) val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } -#endif /*-------------------------------------------------------------------- * wait_for_dlllock. @@ -138,7 +136,7 @@ static int wait_for_dlllock(void) void sdram_panic(const char *reason) { printf("\n%s: reason %s", __FUNCTION__, reason); - sysLedSet(0xff); + hcu_led_set(0xff); while (1) { } /* Never return */ @@ -197,6 +195,13 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes, mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + /* + * Clear possible errors + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + mtspr(mcsr, mfspr(mcsr)); + /* Set 'int_mask' parameter to functionnal value */ mfsdram(DDR0_01, val); mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | @@ -244,7 +249,6 @@ long int initdram (int board_type) sdram_panic(INVALID_HW_CONFIG); break; } - dram_size -= 16 * 1024 * 1024; mtsdram(DDR0_07, 0x00090100); /* * TCPD=200 cycles of clock input is required to lock the DLL. @@ -283,6 +287,7 @@ long int initdram (int board_type) /* * Program tlb entries for this size (dynamic) */ + remove_tlb(CFG_SDRAM_BASE, 256 << 20); program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); /* @@ -291,6 +296,8 @@ long int initdram (int board_type) */ program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0); + /* Diminish RAM to initialize */ + dram_size = dram_size - 32 ; #ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index df1d0380d..bcb927fd1 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -932,7 +932,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * so we flag it to be copied if it is not. */ if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) - of_data = of_flat_tree; + of_data = (ulong)of_flat_tree; #endif /* move of_flat_tree if needed */ @@ -987,6 +987,15 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, #endif #endif /* CONFIG_OF_LIBFDT */ #if defined(CONFIG_OF_FLAT_TREE) +#ifdef CFG_BOOTMAPSZ + /* + * The blob must be within CFG_BOOTMAPSZ, + * so we flag it to be copied if it is not. + */ + if (of_flat_tree >= (char *)CFG_BOOTMAPSZ) + of_data = (ulong)of_flat_tree; +#endif + /* move of_flat_tree if needed */ if (of_data) { ulong of_start, of_len; diff --git a/common/cmd_nand.c b/common/cmd_nand.c index c72612d0d..254a7755f 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -468,14 +468,31 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, ulong offset, ulong addr, char *cmd) { int r; - char *ep; + char *ep, *s; ulong cnt; image_header_t *hdr; + int jffs2 = 0; + + s = strchr(cmd, '.'); + if (s != NULL && + (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) + jffs2 = 1; printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset); cnt = nand->oobblock; - r = nand_read(nand, offset, &cnt, (u_char *) addr); + if (jffs2) { + nand_read_options_t opts; + memset(&opts, 0, sizeof(opts)); + opts.buffer = (u_char*) addr; + opts.length = cnt; + opts.offset = offset; + opts.quiet = 1; + r = nand_read_opts(nand, &opts); + } else { + r = nand_read(nand, offset, &cnt, (u_char *) addr); + } + if (r) { puts("** Read error\n"); show_boot_progress (-56); @@ -495,8 +512,18 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, print_image_hdr(hdr); cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t)); + if (jffs2) { + nand_read_options_t opts; + memset(&opts, 0, sizeof(opts)); + opts.buffer = (u_char*) addr; + opts.length = cnt; + opts.offset = offset; + opts.quiet = 1; + r = nand_read_opts(nand, &opts); + } else { + r = nand_read(nand, offset, &cnt, (u_char *) addr); + } - r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); show_boot_progress (-58); @@ -545,7 +572,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) if (argc > 3) goto usage; if (argc == 3) - addr = simple_strtoul(argv[2], NULL, 16); + addr = simple_strtoul(argv[1], NULL, 16); else addr = CFG_LOAD_ADDR; return nand_load_image(cmdtp, &nand_info[dev->id->num], @@ -604,7 +631,7 @@ usage: U_BOOT_CMD(nboot, 4, 1, do_nandboot, "nboot - boot from NAND device\n", - "[partition] | [[[loadAddr] dev] offset]\n"); + "[.jffs2] [partition] | [[[loadAddr] dev] offset]\n"); #endif diff --git a/common/fdt_support.c b/common/fdt_support.c index caaa682a4..175d59eb9 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -46,7 +46,6 @@ struct fdt_header *fdt; int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force) { - bd_t *bd = gd->bd; int nodeoffset; int err; u32 tmp; /* used to set 32 bit integer properties */ diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 18b90ba5a..67ba5bdef 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -621,7 +621,6 @@ static void get_spd_info(unsigned long *dimm_populated, } } -#ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { PPC440_SYS_INFO board_cfg; @@ -642,7 +641,6 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } -#endif /*------------------------------------------------------------------ * For the memory DIMMs installed, this routine verifies that they diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c index 4c4bc8d7b..8f1d8b29d 100644 --- a/drivers/bios_emulator/besys.c +++ b/drivers/bios_emulator/besys.c @@ -47,9 +47,12 @@ * ****************************************************************************/ -#include "biosemui.h" +#include <common.h> #if defined(CONFIG_BIOSEMU) + +#include "biosemui.h" + /*------------------------- Global Variables ------------------------------*/ #ifndef __i386__ diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c index 7aa1bfb2e..70e9ce143 100644 --- a/drivers/bios_emulator/bios.c +++ b/drivers/bios_emulator/bios.c @@ -41,9 +41,12 @@ * ****************************************************************************/ -#include "biosemui.h" +#include <common.h> #if defined(CONFIG_BIOSEMU) + +#include "biosemui.h" + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** diff --git a/drivers/bios_emulator/biosemu.c b/drivers/bios_emulator/biosemu.c index 4c3aedf41..ccfc872f7 100644 --- a/drivers/bios_emulator/biosemu.c +++ b/drivers/bios_emulator/biosemu.c @@ -45,11 +45,13 @@ * ****************************************************************************/ -#include "biosemui.h" #include <malloc.h> +#include <common.h> #if defined(CONFIG_BIOSEMU) +#include "biosemui.h" + BE_sysEnv _BE_env = {{0}}; static X86EMU_memFuncs _BE_mem __attribute__((section(".got2"))) = { BE_rdb, diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c index 915739c5b..5cbcc9501 100644 --- a/drivers/bios_emulator/x86emu/debug.c +++ b/drivers/bios_emulator/x86emu/debug.c @@ -37,11 +37,13 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" #include <stdarg.h> +#include <common.h> #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ #ifdef DEBUG diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c index 879f0a06d..7a9a1ddbf 100644 --- a/drivers/bios_emulator/x86emu/decode.c +++ b/drivers/bios_emulator/x86emu/decode.c @@ -36,11 +36,12 @@ * instruction decoding and accessess of immediate data via IP. etc. * ****************************************************************************/ - -#include "x86emu/x86emui.h" +#include <common.h> #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c index d334fb5b1..a77bd9b49 100644 --- a/drivers/bios_emulator/x86emu/ops.c +++ b/drivers/bios_emulator/x86emu/ops.c @@ -75,10 +75,12 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include <common.h> #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ /* constant arrays to do several instructions in just one function */ diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c index 81c0d49a3..d6a210c97 100644 --- a/drivers/bios_emulator/x86emu/ops2.c +++ b/drivers/bios_emulator/x86emu/ops2.c @@ -44,10 +44,12 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include <common.h> #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** diff --git a/drivers/bios_emulator/x86emu/prim_ops.c b/drivers/bios_emulator/x86emu/prim_ops.c index c1152eae3..2a254a4e6 100644 --- a/drivers/bios_emulator/x86emu/prim_ops.c +++ b/drivers/bios_emulator/x86emu/prim_ops.c @@ -97,11 +97,14 @@ * ****************************************************************************/ +#include <common.h> + #define PRIM_OPS_NO_REDEFINE_ASM -#include "x86emu/x86emui.h" #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*------------------------- Global Variables ------------------------------*/ static u32 x86emu_parity_tab[8] = diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c index 566389f58..dd44ff1e7 100644 --- a/drivers/bios_emulator/x86emu/sys.c +++ b/drivers/bios_emulator/x86emu/sys.c @@ -39,10 +39,12 @@ * ****************************************************************************/ -#include "x86emu/x86emui.h" +#include <common.h> #if defined(CONFIG_BIOSEMU) +#include "x86emu/x86emui.h" + /*------------------------- Global Variables ------------------------------*/ X86EMU_sysEnv _X86EMU_env; /* Global emulator machine state */ diff --git a/drivers/nand/nand_ids.c b/drivers/nand/nand_ids.c index 075cae66b..6d7e347fb 100644 --- a/drivers/nand/nand_ids.c +++ b/drivers/nand/nand_ids.c @@ -123,6 +123,7 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_NATIONAL, "National"}, {NAND_MFR_RENESAS, "Renesas"}, {NAND_MFR_STMICRO, "ST Micro"}, + {NAND_MFR_MICRON, "Micron"}, {0x0, "Unknown"} }; #endif diff --git a/drivers/pci.c b/drivers/pci.c index 41589192c..50ca6b0ba 100644 --- a/drivers/pci.c +++ b/drivers/pci.c @@ -82,8 +82,10 @@ int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ { \ u32 val32; \ \ - if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ + if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ + *val = -1; \ return -1; \ + } \ \ *val = (val32 >> ((offset & (int)off_mask) * 8)); \ \ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 89a727982..dc2765bb0 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1110,7 +1110,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd) if (dev->enetaddr[0] & 0x01) { printf("%s: MacAddress is multcast address\n", __FUNCTION__); - return -EINVAL; + return 0; } uec_set_mac_address(uec, dev->enetaddr); uec->the_first_run = 1; @@ -1119,10 +1119,10 @@ static int uec_init(struct eth_device* dev, bd_t *bd) err = uec_open(uec, COMM_DIR_RX_AND_TX); if (err) { printf("%s: cannot enable UEC device\n", dev->name); - return err; + return 0; } - return 0; + return uec->mii_info->link; } static void uec_halt(struct eth_device* dev) diff --git a/drivers/tsec.c b/drivers/tsec.c index fd21ed4ed..6bca4dc0f 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -65,38 +65,30 @@ struct tsec_info_struct { * FEC_PHYIDX */ static struct tsec_info_struct tsec_info[] = { -#if defined(CONFIG_TSEC1) -#if defined(CONFIG_MPC8544DS) || defined(CONFIG_MPC8641HPCN) - {TSEC1_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC1_PHYIDX}, -#else - {TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX}, -#endif +#ifdef CONFIG_TSEC1 + {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC2) -#if defined(CONFIG_MPC8641HPCN) - {TSEC2_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC2_PHYIDX}, -#else - {TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX}, -#endif +#ifdef CONFIG_TSEC2 + {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX}, #else {0, 0, 0}, #endif #ifdef CONFIG_MPC85XX_FEC - {FEC_PHY_ADDR, 0, FEC_PHYIDX}, + {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX}, #else -#if defined(CONFIG_TSEC3) - {TSEC3_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC3_PHYIDX}, +#ifdef CONFIG_TSEC3 + {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX}, #else {0, 0, 0}, #endif -#if defined(CONFIG_TSEC4) - {TSEC4_PHY_ADDR, TSEC_GIGABIT | TSEC_REDUCED, TSEC4_PHYIDX}, +#ifdef CONFIG_TSEC4 + {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX}, #else {0, 0, 0}, -#endif -#endif +#endif /* CONFIG_TSEC4 */ +#endif /* CONFIG_MPC85XX_FEC */ }; #define MAXCONTROLLERS (4) @@ -355,17 +347,16 @@ uint mii_cr_init(uint mii_reg, struct tsec_private * priv) uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) { /* - * Wait if PHY is capable of autonegotiation and autonegotiation - * is not complete. + * Wait if the link is up, and autonegotiation is in progress + * (ie - we're capable and it's not done) */ mii_reg = read_phy_reg(priv, MIIM_STATUS); - if ((mii_reg & PHY_BMSR_AUTN_ABLE) + if ((mii_reg & MIIM_STATUS_LINK) && (mii_reg & PHY_BMSR_AUTN_ABLE) && !(mii_reg & PHY_BMSR_AUTN_COMP)) { int i = 0; puts("Waiting for PHY auto negotiation to complete"); - while (!((mii_reg & PHY_BMSR_AUTN_COMP) - && (mii_reg & MIIM_STATUS_LINK))) { + while (!(mii_reg & PHY_BMSR_AUTN_COMP)) { /* * Timeout reached ? */ @@ -385,7 +376,10 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) priv->link = 1; udelay(500000); /* another 500 ms (results in faster booting) */ } else { - priv->link = 1; + if (mii_reg & MIIM_STATUS_LINK) + priv->link = 1; + else + priv->link = 0; } return 0; @@ -525,16 +519,13 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS); - if (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) && - (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) { + if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && + !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { int i = 0; puts("Waiting for PHY realtime link"); - while (!((mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE) && - (mii_reg & MIIM_88E1011_PHYSTAT_LINK))) { - /* - * Timeout reached ? - */ + while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts(" TIMEOUT !\n"); priv->link = 0; @@ -549,6 +540,11 @@ uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) } puts(" done\n"); udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) + priv->link = 1; + else + priv->link = 0; } if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 3d4816f3a..496fc72da 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1596,7 +1596,7 @@ typedef struct ccsr_gur { uint svr; /* 0xe00a4 - System version register */ char res10a[8]; uint rstcr; /* 0xe00b0 - Reset control register */ -#ifdef MPC8568 +#ifdef CONFIG_MPC8568 char res10b[76]; par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */ char res10c[3136]; diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 9e0ee371c..0718c8574 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -53,9 +53,13 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ @@ -144,39 +148,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_NAND_LEGACY - -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 08ef9b5da..1fd2b5397 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -90,8 +90,6 @@ #define CONFIG_CMD_EEPROM -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -157,34 +155,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 0a4e1e9d3..1b948f638 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -92,8 +92,6 @@ #define CONFIG_SUPPORT_VFAT -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index ceeba6e12..fb71c5fb0 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -114,8 +114,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #endif -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 1aefbbac6..49943195b 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -100,9 +100,6 @@ #define CONFIG_SUPPORT_VFAT -#define CFG_NAND_LEGACY - - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index e2652e6aa..29f929244 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -111,8 +111,6 @@ #undef CONFIG_AUTO_UPDATE /* autoupdate via compactflash */ -#define CFG_NAND_LEGACY - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 00f481c4b..ea8e61a76 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -141,8 +141,6 @@ #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ #undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */ -#define CFG_NAND_LEGACY - #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -209,34 +207,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 661b895f9..ed669c51d 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -147,36 +147,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index db79ce28f..96a4cd431 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -310,6 +310,8 @@ #define CONFIG_TSEC2_NAME "TSEC1" #define TSEC1_PHY_ADDR 0x1c #define TSEC2_PHY_ADDR 4 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index d28e0f365..030c621ae 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -440,6 +440,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 82ef4da5d..b380a1ac9 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -382,6 +382,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ #define TSEC1_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT #endif #ifdef CONFIG_TSEC2 @@ -391,6 +392,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ #define TSEC2_PHY_ADDR 4 #define TSEC2_PHYIDX 0 +#define TSEC2_FLAGS TSEC_GIGABIT #endif #define CONFIG_ETHPRIME "Freescale TSEC" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 5a7c879a5..b77499267 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -374,6 +374,8 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #if CONFIG_HAS_FEC @@ -381,6 +383,7 @@ #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #endif /* Options are: TSEC[0-1], FEC */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 0ce25cf24..5c03ac8c9 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -224,6 +224,10 @@ #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 #define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define FEC_FLAGS 0 + /* Options are: TSEC[0-1], FEC */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 232f1716b..33a153e34 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 32934e155..786344733 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -364,15 +364,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_TSEC1_NAME "eTSEC1" #define CONFIG_TSEC3 1 #define CONFIG_TSEC3_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */ -#define CONFIG_SGMII_RISER -#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */ #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + #define TSEC1_PHYIDX 0 #define TSEC3_PHYIDX 0 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index cda9fd5c1..7345a3e10 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -447,6 +447,10 @@ extern unsigned long get_clock_freq(void); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) /* Options are: eTSEC[0-3] */ #define CONFIG_ETHPRIME "eTSEC0" diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index e8fe99aaf..48a2663b5 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -384,13 +384,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 -#define FEC_PHY_ADDR 3 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index c10e551e4..da41dadcd 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -360,11 +360,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index dc9cb1ff5..80ccda51f 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -35,7 +35,7 @@ #define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_QE /* Enable QE */ +#define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_DLL /* possible DLL fix needed */ @@ -348,7 +348,7 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_UEC_ETH #ifndef CONFIG_TSEC_ENET -#define CONFIG_ETHPRIME "Freescale GETH" +#define CONFIG_ETHPRIME "FSL UEC0" #endif #define CONFIG_PHY_MODE_NEED_CHANGE #define CONFIG_eTSEC_MDIO_BUS @@ -399,9 +399,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_TSEC1_NAME "eTSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "eTSEC1" -#undef CONFIG_TSEC3 -#undef CONFIG_TSEC4 -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 3 @@ -409,7 +406,10 @@ extern unsigned long get_clock_freq(void); #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 -/* Options are: eTSEC[0-3] */ +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: eTSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC0" #endif /* CONFIG_TSEC_ENET */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 64dcbd010..e912331f3 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -417,6 +417,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define CONFIG_ETHPRIME "eTSEC1" diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 54703731a..4acbcd5e1 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -96,7 +96,6 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ -#define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -168,36 +167,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ @@ -276,11 +254,6 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ -#endif - /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -306,9 +279,6 @@ #define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/ /* total size of a CAT24WC16 is 2048 bytes */ -#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CFG_NVRAM_SIZE 242 /* NVRAM size */ - /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ @@ -317,7 +287,7 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ -#if 1 /* test-only */ + /* CAT24WC08/16... */ #define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ /* mask of address bits that overflow into the "EEPROM chip address" */ @@ -325,15 +295,6 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ /* 16 byte page write mode using*/ /* last 4 bits of the address */ -#else -/* CAT24WC32/64... */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ - /* 32 byte page write mode using*/ - /* last 5 bits of the address */ -#endif #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE diff --git a/include/configs/PM854.h b/include/configs/PM854.h index dbf94228a..93090b981 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -270,11 +270,14 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_MPC85XX_FEC 1 #define CONFIG_MPC85XX_FEC_NAME "FEC" #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6bdfa5d8f..6105747c7 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -262,11 +262,12 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPC85XX_FEC #define TSEC1_PHY_ADDR 0 #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #endif /* CONFIG_TSEC_ENET */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 661712b22..91c1694f2 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -253,6 +253,8 @@ extern int tqm834x_num_flash_banks; #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d5ce3ba71..9beb0bacf 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -94,7 +94,6 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE -#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ @@ -266,8 +265,11 @@ #define TSEC2_PHY_ADDR 1 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define FEC_PHY_ADDR 3 #define FEC_PHYIDX 0 +#define FEC_FLAGS 0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 34f0ebdcf..3880ec747 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -153,36 +153,15 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index c1b3da863..656784aa0 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -145,38 +145,16 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ -#define CFG_NAND_LEGACY +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_BIG_DELAY_US 25 -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 +#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ +#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ +#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */ #define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ /*----------------------------------------------------------------------- diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index d0bf2516e..f95d78ec1 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -43,7 +43,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 110ad44ee..b6d0f519a 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -42,7 +42,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS /*----------------------------------------------------------------------- diff --git a/include/configs/luan.h b/include/configs/luan.h index 26dbec92e..a09dd7473 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -39,7 +39,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 604b7d12f..7116c49c7 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -35,7 +35,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8ae38cb27..bec442d98 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -60,7 +60,6 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 1831bef0d..aa515ea61 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -410,6 +410,8 @@ #define TSEC2_PHY_ADDR 0x1a #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "TSEC0" diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 277b61140..760b754e6 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -380,6 +380,10 @@ #define TSEC2_PHYIDX 0 #define TSEC3_PHYIDX 0 #define TSEC4_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC3_FLAGS TSEC_GIGABIT +#define TSEC4_FLAGS TSEC_GIGABIT #define CFG_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 3f75a441a..824a81240 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -343,6 +343,11 @@ #define CONFIG_CMD_USB #endif +#ifndef CONFIG_RAINIER +#define CFG_POST_FPU_ON CFG_POST_FPU +#else +#define CFG_POST_FPU_ON 0 +#endif /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ @@ -350,7 +355,7 @@ CFG_POST_UART | \ CFG_POST_I2C | \ CFG_POST_CACHE | \ - CFG_POST_FPU | \ + CFG_POST_FPU_ON | \ CFG_POST_ETHER | \ CFG_POST_SPR) diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 1f41cf769..43b185bee 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -234,12 +234,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#undef CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 55e2c8da2..3dae27ac1 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -260,12 +260,13 @@ #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 1 #define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_MPS85XX_FEC #define TSEC1_PHY_ADDR 2 #define TSEC2_PHY_ADDR 4 #define TSEC1_PHYIDX 0 #define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT #define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 9c536fd12..906f046fa 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -46,7 +46,6 @@ #define EXTCLK_83 83333333 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ -#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ #undef CONFIG_SHOW_BOOT_PROGRESS #undef CONFIG_STRESS diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 4b485643a..49ff80fd3 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -348,6 +348,7 @@ struct nand_chip { #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_MICRON 0x2c /** * struct nand_flash_dev - NAND Flash Device ID Structure diff --git a/include/nand.h b/include/nand.h index 23493f7e9..3c0752ea1 100644 --- a/include/nand.h +++ b/include/nand.h @@ -32,6 +32,7 @@ typedef struct mtd_info nand_info_t; extern int nand_curr_device; extern nand_info_t nand_info[]; +extern void nand_init(void); static inline int nand_read(nand_info_t *info, ulong ofs, ulong *len, u_char *buf) { diff --git a/lib_ppc/board.c b/lib_ppc/board.c index c87d46c3d..9aa67f93c 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -209,9 +209,12 @@ static int init_baudrate (void) /***********************************************************************/ -#ifdef CONFIG_ADD_RAM_INFO -void board_add_ram_info(int); -#endif +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} +void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); + static int init_func_ram (void) { @@ -224,9 +227,7 @@ static int init_func_ram (void) if ((gd->ram_size = initdram (board_type)) > 0) { print_size (gd->ram_size, ""); -#ifdef CONFIG_ADD_RAM_INFO board_add_ram_info(0); -#endif putc('\n'); return (0); } |