summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS1
-rw-r--r--board/samsung/smdk5250/Makefile51
-rw-r--r--board/samsung/smdk5250/clock_init.c202
-rw-r--r--board/samsung/smdk5250/dmc_init.c462
-rw-r--r--board/samsung/smdk5250/lowlevel_init.S96
-rw-r--r--board/samsung/smdk5250/setup.h451
-rw-r--r--board/samsung/smdk5250/smdk5250.c146
-rw-r--r--board/samsung/smdk5250/tzpc_init.c48
-rw-r--r--boards.cfg1
-rw-r--r--include/configs/smdk5250.h190
10 files changed, 1648 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 74d3dc59c..881887723 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -717,6 +717,7 @@ Chander Kashyap <k.chander@samsung.com>
origen ARM ARMV7 (EXYNOS4210 SoC)
SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
+ SMDK5250 ARM ARMV7 (EXYNOS5250 SoC)
Heungjun Kim <riverful.kim@samsung.com>
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
new file mode 100644
index 000000000..80e8be32d
--- /dev/null
+++ b/board/samsung/smdk5250/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+SOBJS := lowlevel_init.o
+
+COBJS := clock_init.o
+COBJS += dmc_init.o
+COBJS += tzpc_init.o
+COBJS += smdk5250.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+ALL := $(obj).depend $(LIB)
+
+all: $(ALL)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
new file mode 100644
index 000000000..305842d2f
--- /dev/null
+++ b/board/samsung/smdk5250/clock_init.c
@@ -0,0 +1,202 @@
+/*
+ * Clock setup for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include "setup.h"
+
+void system_clock_init()
+{
+ struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+
+ /*
+ * MUX_APLL_SEL[0]: FINPLL = 0
+ * MUX_CPU_SEL[6]: MOUTAPLL = 0
+ * MUX_HPM_SEL[20]: MOUTAPLL = 0
+ */
+ writel(0x0, &clk->src_cpu);
+
+ /* MUX_MPLL_SEL[8]: FINPLL = 0 */
+ writel(0x0, &clk->src_core1);
+
+ /*
+ * VPLLSRC_SEL[0]: FINPLL = 0
+ * MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: FINPLL = 0
+ */
+ writel(0x0, &clk->src_top2);
+
+ /* MUX_BPLL_SEL[0]: FINPLL = 0 */
+ writel(0x0, &clk->src_cdrex);
+
+ /* MUX_ACLK_* Clock Selection */
+ writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+
+ /* MUX_ACLK_* Clock Selection */
+ writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+
+ /* MUX_ACLK_* Clock Selection */
+ writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
+
+ /* MUX_PWI_SEL[19:16]: SCLKMPLL = 6 */
+ writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
+
+ /* MUX_ATCLK_LEX[0]: ACLK_200 = 0 */
+ writel(CLK_SRC_LEX_VAL, &clk->src_lex);
+
+ /* UART [0-5]: SCLKMPLL = 6 */
+ writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
+
+ /* Set Clock Ratios */
+ writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
+
+ /* Set COPY and HPM Ratio */
+ writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+
+ /* CORED_RATIO, COREP_RATIO */
+ writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
+
+ /* PWI_RATIO[11:8], DVSEM_RATIO[22:16], DPM_RATIO[24:20] */
+ writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
+
+ /* ACLK_*_RATIO */
+ writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
+
+ /* ACLK_*_RATIO */
+ writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
+
+ /* CDREX Ratio */
+ writel(CLK_DIV_CDREX_INIT_VAL, &clk->div_cdrex);
+
+ /* MCLK_EFPHY_RATIO[3:0] */
+ writel(CLK_DIV_CDREX2_VAL, &clk->div_cdrex2);
+
+ /* {PCLK[4:6]|ATCLK[10:8]}_RATIO */
+ writel(CLK_DIV_LEX_VAL, &clk->div_lex);
+
+ /* PCLK_R0X_RATIO[3:0] */
+ writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
+
+ /* PCLK_R1X_RATIO[3:0] */
+ writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
+
+ /* SATA[24]: SCLKMPLL=0, MMC[0-4]: SCLKMPLL = 6 */
+ writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
+
+ /* UART[0-4] */
+ writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
+
+ /* PWM_RATIO[3:0] */
+ writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
+
+ /* SATA_RATIO, USB_DRD_RATIO */
+ writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
+
+ /* MMC[0-1] */
+ writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+
+ /* MMC[2-3] */
+ writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+
+ /* MMC[4] */
+ writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
+
+ /* ACLK|PLCK_ACP_RATIO */
+ writel(CLK_DIV_ACP_VAL, &clk->div_acp);
+
+ /* ISPDIV0_RATIO, ISPDIV1_RATIO */
+ writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
+
+ /* MCUISPDIV0_RATIO, MCUISPDIV1_RATIO */
+ writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
+
+ /* MPWMDIV_RATIO */
+ writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
+
+ /* PLL locktime */
+ writel(APLL_LOCK_VAL, &clk->apll_lock);
+
+ writel(MPLL_LOCK_VAL, &clk->mpll_lock);
+
+ writel(BPLL_LOCK_VAL, &clk->bpll_lock);
+
+ writel(CPLL_LOCK_VAL, &clk->cpll_lock);
+
+ writel(EPLL_LOCK_VAL, &clk->epll_lock);
+
+ writel(VPLL_LOCK_VAL, &clk->vpll_lock);
+
+ sdelay(0x10000);
+
+ /* Set APLL */
+ writel(APLL_CON1_VAL, &clk->apll_con1);
+ writel(APLL_CON0_VAL, &clk->apll_con0);
+ sdelay(0x30000);
+
+ /* Set MPLL */
+ writel(MPLL_CON1_VAL, &clk->mpll_con1);
+ writel(MPLL_CON0_VAL, &clk->mpll_con0);
+ sdelay(0x30000);
+ writel(BPLL_CON1_VAL, &clk->bpll_con1);
+ writel(BPLL_CON0_VAL, &clk->bpll_con0);
+ sdelay(0x30000);
+
+ /* Set CPLL */
+ writel(CPLL_CON1_VAL, &clk->cpll_con1);
+ writel(CPLL_CON0_VAL, &clk->cpll_con0);
+ sdelay(0x30000);
+
+ /* Set EPLL */
+ writel(EPLL_CON2_VAL, &clk->epll_con2);
+ writel(EPLL_CON1_VAL, &clk->epll_con1);
+ writel(EPLL_CON0_VAL, &clk->epll_con0);
+ sdelay(0x30000);
+
+ /* Set VPLL */
+ writel(VPLL_CON2_VAL, &clk->vpll_con2);
+ writel(VPLL_CON1_VAL, &clk->vpll_con1);
+ writel(VPLL_CON0_VAL, &clk->vpll_con0);
+ sdelay(0x30000);
+
+ /* Set MPLL */
+ /* After Initiallising th PLL select the sources accordingly */
+ /* MUX_APLL_SEL[0]: MOUTAPLLFOUT = 1 */
+ writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
+
+ /* MUX_MPLL_SEL[8]: MOUTMPLLFOUT = 1 */
+ writel(CLK_SRC_CORE1_VAL, &clk->src_core1);
+
+ /* MUX_BPLL_SEL[0]: FOUTBPLL = 1*/
+ writel(CLK_SRC_CDREX_INIT_VAL, &clk->src_cdrex);
+
+ /*
+ * VPLLSRC_SEL[0]: FINPLL = 0
+ * MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: MOUT{CPLL|EPLL|VPLL} = 1
+ * MUX_{MPLL[20]}|{BPLL[24]}_USER_SEL: FOUT{MPLL|BPLL} = 1
+ */
+ writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
+}
diff --git a/board/samsung/smdk5250/dmc_init.c b/board/samsung/smdk5250/dmc_init.c
new file mode 100644
index 000000000..788107465
--- /dev/null
+++ b/board/samsung/smdk5250/dmc_init.c
@@ -0,0 +1,462 @@
+/*
+ * Memory setup for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include "setup.h"
+
+/* APLL : 1GHz */
+/* MCLK_CDREX: MCLK_CDREX_533*/
+/* LPDDR support: LPDDR2 */
+static void reset_phy_ctrl(void);
+static void config_zq(struct exynos5_phy_control *,
+ struct exynos5_phy_control *);
+static void update_reset_dll(struct exynos5_dmc *);
+static void config_cdrex(void);
+static void config_mrs(struct exynos5_dmc *);
+static void sec_sdram_phy_init(struct exynos5_dmc *);
+static void config_prech(struct exynos5_dmc *);
+static void config_rdlvl(struct exynos5_dmc *,
+ struct exynos5_phy_control *,
+ struct exynos5_phy_control *);
+static void config_memory(struct exynos5_dmc *);
+
+static void config_offsets(unsigned int,
+ struct exynos5_phy_control *,
+ struct exynos5_phy_control *);
+
+static void reset_phy_ctrl(void)
+{
+ struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+
+ writel(PHY_RESET_VAL, &clk->lpddr3phy_ctrl);
+ sdelay(0x10000);
+}
+
+static void config_zq(struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl)
+{
+ unsigned long val = 0;
+ /*
+ * ZQ Calibration:
+ * Select Driver Strength,
+ * long calibration for manual calibration
+ */
+ val = PHY_CON16_RESET_VAL;
+ SET_ZQ_MODE_DDS_VAL(val);
+ SET_ZQ_MODE_TERM_VAL(val);
+ val |= ZQ_CLK_DIV_EN;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+
+ /* Disable termination */
+ val |= ZQ_MODE_NOTERM;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+
+ /* ZQ_MANUAL_START: Enable */
+ val |= ZQ_MANUAL_STR;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+ sdelay(0x10000);
+
+ /* ZQ_MANUAL_START: Disable */
+ val &= ~ZQ_MANUAL_STR;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+}
+
+static void update_reset_dll(struct exynos5_dmc *dmc)
+{
+ unsigned long val;
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ val = readl(&dmc->phycontrol0);
+ val |= FP_RSYNC;
+ writel(val, &dmc->phycontrol0);
+
+ /* Reset Force DLL Resyncronization */
+ val = readl(&dmc->phycontrol0);
+ val &= ~FP_RSYNC;
+ writel(val, &dmc->phycontrol0);
+}
+
+static void config_mrs(struct exynos5_dmc *dmc)
+{
+ unsigned long channel, chip, mask = 0, val;
+
+ for (channel = 0; channel < CONFIG_DMC_CHANNELS; channel++) {
+ SET_CMD_CHANNEL(mask, channel);
+ for (chip = 0; chip < CONFIG_CHIPS_PER_CHANNEL; chip++) {
+ /*
+ * NOP CMD:
+ * Assert and hold CKE to logic high level
+ */
+ SET_CMD_CHIP(mask, chip);
+ val = DIRECT_CMD_NOP | mask;
+ writel(val, &dmc->directcmd);
+ sdelay(0x10000);
+
+ /* EMRS, MRS Cmds(Mode Reg Settings) Using Direct Cmd */
+ val = DIRECT_CMD_MRS1 | mask;
+ writel(val, &dmc->directcmd);
+ sdelay(0x10000);
+
+ val = DIRECT_CMD_MRS2 | mask;
+ writel(val, &dmc->directcmd);
+ sdelay(0x10000);
+
+ /* MCLK_CDREX_533 */
+ val = DIRECT_CMD_MRS3 | mask;
+ writel(val, &dmc->directcmd);
+ sdelay(0x10000);
+
+ val = DIRECT_CMD_MRS4 | mask;
+ writel(val, &dmc->directcmd);
+ sdelay(0x10000);
+ }
+ }
+}
+
+static void config_prech(struct exynos5_dmc *dmc)
+{
+ unsigned long channel, chip, mask = 0, val;
+
+ for (channel = 0; channel < CONFIG_DMC_CHANNELS; channel++) {
+ SET_CMD_CHANNEL(mask, channel);
+ for (chip = 0; chip < CONFIG_CHIPS_PER_CHANNEL; chip++) {
+ SET_CMD_CHIP(mask, chip);
+ /* PALL (all banks precharge) CMD */
+ val = DIRECT_CMD_PALL | mask;
+ writel(val, &dmc->directcmd);
+ sdelay(0x10000);
+ }
+ }
+}
+
+static void sec_sdram_phy_init(struct exynos5_dmc *dmc)
+{
+ unsigned long val;
+ val = readl(&dmc->concontrol);
+ val |= DFI_INIT_START;
+ writel(val, &dmc->concontrol);
+ sdelay(0x10000);
+
+ val = readl(&dmc->concontrol);
+ val &= ~DFI_INIT_START;
+ writel(val, &dmc->concontrol);
+}
+
+static void config_offsets(unsigned int state,
+ struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl)
+{
+ unsigned long val;
+ /* Set Offsets to read DQS */
+ val = (state == SET) ? SET_DQS_OFFSET_VAL : RESET_DQS_OFFSET_VAL;
+ writel(val, &phy0_ctrl->phy_con4);
+ writel(val, &phy1_ctrl->phy_con4);
+
+ /* Set Offsets to read DQ */
+ val = (state == SET) ? SET_DQ_OFFSET_VAL : RESET_DQ_OFFSET_VAL;
+ writel(val, &phy0_ctrl->phy_con6);
+ writel(val, &phy1_ctrl->phy_con6);
+
+ /* Debug Offset */
+ val = (state == SET) ? SET_DEBUG_OFFSET_VAL : RESET_DEBUG_OFFSET_VAL;
+ writel(val, &phy0_ctrl->phy_con10);
+ writel(val, &phy1_ctrl->phy_con10);
+}
+
+static void config_cdrex(void)
+{
+ struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+ writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
+ writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex);
+ sdelay(0x30000);
+}
+
+static void config_ctrl_dll_on(unsigned int state,
+ unsigned int ctrl_force_val,
+ struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl)
+{
+ unsigned long val;
+ val = readl(&phy0_ctrl->phy_con12);
+ CONFIG_CTRL_DLL_ON(val, state);
+ SET_CTRL_FORCE_VAL(val, ctrl_force_val);
+ writel(val, &phy0_ctrl->phy_con12);
+
+ val = readl(&phy1_ctrl->phy_con12);
+ CONFIG_CTRL_DLL_ON(val, state);
+ SET_CTRL_FORCE_VAL(val, ctrl_force_val);
+ writel(val, &phy1_ctrl->phy_con12);
+}
+
+static void config_ctrl_start(unsigned int state,
+ struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl)
+{
+ unsigned long val;
+ val = readl(&phy0_ctrl->phy_con12);
+ CONFIG_CTRL_START(val, state);
+ writel(val, &phy0_ctrl->phy_con12);
+
+ val = readl(&phy1_ctrl->phy_con12);
+ CONFIG_CTRL_START(val, state);
+ writel(val, &phy1_ctrl->phy_con12);
+}
+
+#if defined(CONFIG_RD_LVL)
+static void config_rdlvl(struct exynos5_dmc *dmc,
+ struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl)
+{
+ unsigned long val;
+
+ /* Disable CTRL_DLL_ON and set ctrl_force */
+ config_ctrl_dll_on(RESET, 0x2D, phy0_ctrl, phy1_ctrl);
+
+ /*
+ * Set ctrl_gateadj, ctrl_readadj
+ * ctrl_gateduradj, rdlvl_pass_adj
+ * rdlvl_rddataPadj
+ */
+ val = SET_RDLVL_RDDATAPADJ;
+ writel(val, &phy0_ctrl->phy_con1);
+ writel(val, &phy1_ctrl->phy_con1);
+
+ /* LPDDR2 Address */
+ writel(LPDDR2_ADDR, &phy0_ctrl->phy_con22);
+ writel(LPDDR2_ADDR, &phy1_ctrl->phy_con22);
+
+ /* Enable Byte Read Leveling set ctrl_ddr_mode */
+ val = readl(&phy0_ctrl->phy_con0);
+ val |= BYTE_RDLVL_EN;
+ writel(val, &phy0_ctrl->phy_con0);
+ val = readl(&phy1_ctrl->phy_con0);
+ val |= BYTE_RDLVL_EN;
+ writel(val, &phy1_ctrl->phy_con0);
+
+ /* rdlvl_en: Use levelling offset instead ctrl_shiftc */
+ val = PHY_CON2_RESET_VAL | RDLVL_EN;
+ writel(val, &phy0_ctrl->phy_con2);
+ writel(val, &phy1_ctrl->phy_con2);
+ sdelay(0x10000);
+
+ /* Enable Data Eye Training */
+ val = readl(&dmc->rdlvl_config);
+ val |= CTRL_RDLVL_DATA_EN;
+ writel(val, &dmc->rdlvl_config);
+ sdelay(0x10000);
+
+ /* Disable Data Eye Training */
+ val = readl(&dmc->rdlvl_config);
+ val &= ~CTRL_RDLVL_DATA_EN;
+ writel(val, &dmc->rdlvl_config);
+
+ /* RdDeSkew_clear: Clear */
+ val = readl(&phy0_ctrl->phy_con2);
+ val |= RDDSKEW_CLEAR;
+ writel(val, &phy0_ctrl->phy_con2);
+ val = readl(&phy1_ctrl->phy_con2);
+ val |= RDDSKEW_CLEAR;
+ writel(val, &phy1_ctrl->phy_con2);
+
+ /* Enable CTRL_DLL_ON */
+ config_ctrl_dll_on(SET, 0x0, phy0_ctrl, phy1_ctrl);
+
+ update_reset_dll(dmc);
+ sdelay(0x10000);
+
+ /* ctrl_atgte: ctrl_gate_p*, ctrl_read_p* generated by PHY */
+ val = readl(&phy0_ctrl->phy_con0);
+ val &= ~CTRL_ATGATE;
+ writel(val, &phy0_ctrl->phy_con0);
+ val = readl(&phy1_ctrl->phy_con0);
+ val &= ~CTRL_ATGATE;
+ writel(val, &phy1_ctrl->phy_con0);
+}
+#endif
+
+static void config_memory(struct exynos5_dmc *dmc)
+{
+ /*
+ * Memory Configuration Chip 0
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ writel(DMC_MEMCONFIG0_VAL, &dmc->memconfig0);
+
+ /*
+ * Memory Configuration Chip 1
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ writel(DMC_MEMCONFIG1_VAL, &dmc->memconfig1);
+
+ /*
+ * Chip0: AXI
+ * AXI Base Address: 0x40000000
+ * AXI Base Address Mask: 0x780
+ */
+ writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0);
+
+ /*
+ * Chip1: AXI
+ * AXI Base Address: 0x80000000
+ * AXI Base Address Mask: 0x780
+ */
+ writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
+}
+
+void mem_ctrl_init()
+{
+ struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
+ struct exynos5_dmc *dmc;
+ unsigned long val;
+
+ phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
+ phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
+ dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
+
+ /* Reset PHY Controllor: PHY_RESET[0] */
+ reset_phy_ctrl();
+
+ /*set Read Latancy and Burst Length for PHY0 and PHY1 */
+ writel(PHY_CON42_VAL, &phy0_ctrl->phy_con42);
+ writel(PHY_CON42_VAL, &phy1_ctrl->phy_con42);
+
+ /* ZQ Cofiguration */
+ config_zq(phy0_ctrl, phy1_ctrl);
+
+ /* Operation Mode : LPDDR2 */
+ val = PHY_CON0_RESET_VAL;
+ SET_CTRL_DDR_MODE(val, DDR_MODE_LPDDR2);
+ writel(val, &phy0_ctrl->phy_con0);
+ writel(val, &phy1_ctrl->phy_con0);
+
+ /* DQS, DQ: Signal, for LPDDR2: Always Set */
+ val = CTRL_PULLD_DQ | CTRL_PULLD_DQS;
+ writel(val, &phy0_ctrl->phy_con14);
+ writel(val, &phy1_ctrl->phy_con14);
+
+ /* Init SEC SDRAM PHY */
+ sec_sdram_phy_init(dmc);
+ sdelay(0x10000);
+
+ update_reset_dll(dmc);
+
+ /*
+ * Dynamic Clock: Always Running
+ * Memory Burst length: 4
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: LPDDR2-S4
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ writel(DMC_MEMCONTROL_VAL, &dmc->memcontrol);
+
+ config_memory(dmc);
+
+ /* Precharge Configuration */
+ writel(DMC_PRECHCONFIG_VAL, &dmc->prechconfig);
+
+ /* Power Down mode Configuration */
+ writel(DMC_PWRDNCONFIG_VAL, &dmc->pwrdnconfig);
+
+ /* Periodic Refrese Interval */
+ writel(DMC_TIMINGREF_VAL, &dmc->timingref);
+
+ /*
+ * TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ writel(DMC_TIMINGROW_VAL, &dmc->timingrow);
+
+ writel(DMC_TIMINGDATA_VAL, &dmc->timingdata);
+
+ writel(DMC_TIMINGPOWER_VAL, &dmc->timingpower);
+
+ /* Memory Channel Inteleaving Size: 128 Bytes */
+ writel(CONFIG_IV_SIZE, &dmc->ivcontrol);
+
+ /* Set DQS, DQ and DEBUG offsets */
+ config_offsets(SET, phy0_ctrl, phy1_ctrl);
+
+ /* Disable CTRL_DLL_ON and set ctrl_force */
+ config_ctrl_dll_on(RESET, 0x7F, phy0_ctrl, phy1_ctrl);
+ sdelay(0x10000);
+
+ update_reset_dll(dmc);
+
+ /* Config MRS(Mode Register Settingg) */
+ config_mrs(dmc);
+
+ config_cdrex();
+
+ /* Reset DQS DQ and DEBUG offsets */
+ config_offsets(RESET, phy0_ctrl, phy1_ctrl);
+
+ /* Enable CTRL_DLL_ON */
+ config_ctrl_dll_on(SET, 0x0, phy0_ctrl, phy1_ctrl);
+
+ /* Stop DLL Locking */
+ config_ctrl_start(RESET, phy0_ctrl, phy1_ctrl);
+ sdelay(0x10000);
+
+ /* Start DLL Locking */
+ config_ctrl_start(SET, phy0_ctrl, phy1_ctrl);
+ sdelay(0x10000);
+
+ update_reset_dll(dmc);
+
+#if defined(CONFIG_RD_LVL)
+ config_rdlvl(dmc, phy0_ctrl, phy1_ctrl);
+#endif
+ config_prech(dmc);
+
+ /*
+ * Dynamic Clock: Stops During Idle Period
+ * Dynamic Power Down: Enable
+ * Dynamic Self refresh: Enable
+ */
+ val = readl(&dmc->memcontrol);
+ val |= CLK_STOP_EN | DPWRDN_EN | DSREF_EN;
+ writel(val, &dmc->memcontrol);
+
+ /* Start Auto refresh */
+ val = readl(&dmc->concontrol);
+ val |= AREF_EN;
+ writel(val, &dmc->concontrol);
+}
diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S
new file mode 100644
index 000000000..bc6cb6f73
--- /dev/null
+++ b/board/samsung/smdk5250/lowlevel_init.S
@@ -0,0 +1,96 @@
+/*
+ * Lowlevel setup for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+
+ /* use iRAM stack in bl2 */
+ ldr sp, =CONFIG_IRAM_STACK
+ stmdb r13!, {ip,lr}
+
+ /* check reset status */
+ ldr r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET)
+ ldr r1, [r0]
+
+ /* AFTR wakeup reset */
+ ldr r2, =S5P_CHECK_DIDLE
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* LPA wakeup reset */
+ ldr r2, =S5P_CHECK_LPA
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* Sleep wakeup reset */
+ ldr r2, =S5P_CHECK_SLEEP
+ cmp r1, r2
+ beq wakeup_reset
+
+ /*
+ * If U-boot is already running in RAM, no need to relocate U-Boot.
+ * Memory controller must be configured before relocating U-Boot
+ * in ram.
+ */
+ ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
+ bic r1, pc, r0 /* pc <- current addr of code */
+ /* r1 <- unmasked bits of pc */
+ ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
+ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
+ cmp r1, r2 /* compare r1, r2 */
+ beq 1f /* r0 == r1 then skip sdram init */
+
+ /* init system clock */
+ bl system_clock_init
+
+ /* Memory initialize */
+ bl mem_ctrl_init
+
+1:
+ bl tzpc_init
+ ldmia r13!, {ip,pc}
+
+wakeup_reset:
+ bl system_clock_init
+ bl mem_ctrl_init
+ bl tzpc_init
+
+exit_wakeup:
+ /* Load return address and jump to kernel */
+ ldr r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET)
+
+ /* r1 = physical address of exynos5_cpu_resume function*/
+ ldr r1, [r0]
+
+ /* Jump to kernel */
+ mov pc, r1
+ nop
+ nop
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
new file mode 100644
index 000000000..1276fd3e6
--- /dev/null
+++ b/board/samsung/smdk5250/setup.h
@@ -0,0 +1,451 @@
+/*
+ * Machine Specific Values for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SMDK5250_SETUP_H
+#define _SMDK5250_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* GPIO Offsets for UART: GPIO Contol Register */
+#define EXYNOS5_GPIO_A0_CON_OFFSET 0x0
+#define EXYNOS5_GPIO_A1_CON_OFFSET 0x20
+
+/* TZPC : Register Offsets */
+#define TZPC0_BASE 0x10100000
+#define TZPC1_BASE 0x10110000
+#define TZPC2_BASE 0x10120000
+#define TZPC3_BASE 0x10130000
+#define TZPC4_BASE 0x10140000
+#define TZPC5_BASE 0x10150000
+#define TZPC6_BASE 0x10160000
+#define TZPC7_BASE 0x10170000
+#define TZPC8_BASE 0x10180000
+#define TZPC9_BASE 0x10190000
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL 0
+#define MUX_CPU_SEL 0
+#define MUX_APLL_SEL 1
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
+ | (MUX_CPU_SEL << 16) \
+ | (MUX_APLL_SEL))
+
+/* CLK_DIV_CPU0 */
+#define ARM2_RATIO 0x0
+#define APLL_RATIO 0x1
+#define PCLK_DBG_RATIO 0x1
+#define ATB_RATIO 0x4
+#define PERIPH_RATIO 0x7
+#define ACP_RATIO 0x7
+#define CPUD_RATIO 0x2
+#define ARM_RATIO 0x0
+#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \
+ | (APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (ACP_RATIO << 8) \
+ | (CPUD_RATIO << 4) \
+ | (ARM_RATIO))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x4
+#define COPY_RATIO 0x0
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \
+ | (COPY_RATIO))
+
+#define APLL_MDIV 0x7D
+#define APLL_PDIV 0x3
+#define APLL_SDIV 0x0
+
+#define MPLL_MDIV 0x64
+#define MPLL_PDIV 0x3
+#define MPLL_SDIV 0x0
+
+#define CPLL_MDIV 0x96
+#define CPLL_PDIV 0x4
+#define CPLL_SDIV 0x0
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL (0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL (0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL (0x00203800)
+
+#define EPLL_MDIV 0x60
+#define EPLL_PDIV 0x3
+#define EPLL_SDIV 0x3
+
+#define EPLL_CON1_VAL 0x00000000
+#define EPLL_CON2_VAL 0x00000080
+
+#define VPLL_MDIV 0x96
+#define VPLL_PDIV 0x3
+#define VPLL_SDIV 0x2
+
+#define VPLL_CON1_VAL 0x00000000
+#define VPLL_CON2_VAL 0x00000080
+
+#define BPLL_MDIV 0x215
+#define BPLL_PDIV 0xC
+#define BPLL_SDIV 0x1
+
+#define BPLL_CON1_VAL 0x00203800
+
+/* Set PLL */
+#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+#define APLL_CON0_VAL set_pll(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+#define MPLL_CON0_VAL set_pll(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+#define CPLL_CON0_VAL set_pll(CPLL_MDIV, CPLL_PDIV, CPLL_SDIV)
+#define EPLL_CON0_VAL set_pll(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+#define VPLL_CON0_VAL set_pll(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+#define BPLL_CON0_VAL set_pll(BPLL_MDIV, BPLL_PDIV, BPLL_SDIV)
+
+/* CLK_SRC_CORE0 */
+#define CLK_SRC_CORE0_VAL 0x00060000
+
+/* CLK_SRC_CORE1 */
+#define CLK_SRC_CORE1_VAL 0x100
+
+/* CLK_DIV_CORE0 */
+#define CLK_DIV_CORE0_VAL 0x120000
+
+/* CLK_DIV_CORE1 */
+#define CLK_DIV_CORE1_VAL 0x07070700
+
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_INIT_VAL 0x1
+#define CLK_SRC_CDREX_VAL 0x111
+
+/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX_INIT_VAL 0x71771111
+
+#define MCLK_CDREX2_RATIO 0x0
+#define ACLK_EFCON_RATIO 0x1
+#define MCLK_DPHY_RATIO 0x0
+#define MCLK_CDREX_RATIO 0x0
+#define ACLK_C2C_200_RATIO 0x1
+#define C2C_CLK_400_RATIO 0x1
+#define PCLK_CDREX_RATIO 0x3
+#define ACLK_CDREX_RATIO 0x1
+#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 20) \
+ | (MCLK_CDREX_RATIO << 16) \
+ | (ACLK_C2C_200_RATIO << 12) \
+ | (C2C_CLK_400_RATIO << 8) \
+ | (PCLK_CDREX_RATIO << 4) \
+ | (ACLK_CDREX_RATIO))
+
+#define MCLK_EFPHY_RATIO 0x4
+#define CLK_DIV_CDREX2_VAL MCLK_EFPHY_RATIO
+
+/* CLK_DIV_ACP */
+#define CLK_DIV_ACP_VAL 0x12
+
+/* CLK_SRC_TOP0 */
+#define MUX_ACLK_300_GSCL_SEL 0x1
+#define MUX_ACLK_300_GSCL_MID_SEL 0x0
+#define MUX_ACLK_400_SEL 0x0
+#define MUX_ACLK_333_SEL 0x0
+#define MUX_ACLK_300_DISP1_SEL 0x1
+#define MUX_ACLK_300_DISP1_MID_SEL 0x0
+#define MUX_ACLK_200_SEL 0x0
+#define MUX_ACLK_166_SEL 0x0
+#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \
+ | (MUX_ACLK_300_GSCL_MID_SEL << 24) \
+ | (MUX_ACLK_400_SEL << 20) \
+ | (MUX_ACLK_333_SEL << 16) \
+ | (MUX_ACLK_300_DISP1_SEL << 15) \
+ | (MUX_ACLK_300_DISP1_MID_SEL << 14) \
+ | (MUX_ACLK_200_SEL << 12) \
+ | (MUX_ACLK_166_SEL << 8))
+
+/* CLK_SRC_TOP1 */
+#define MUX_ACLK_400_ISP_SEL 0x0
+#define MUX_ACLK_400_IOP_SEL 0x0
+#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0
+#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_ISP_SEL << 24) \
+ |(MUX_ACLK_400_IOP_SEL << 20) \
+ |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16))
+
+/* CLK_SRC_TOP2 */
+#define MUX_BPLL_USER_SEL 0x1
+#define MUX_MPLL_USER_SEL 0x1
+#define MUX_VPLL_SEL 0x0
+#define MUX_EPLL_SEL 0x0
+#define MUX_CPLL_SEL 0x0
+#define VPLLSRC_SEL 0x0
+#define CLK_SRC_TOP2_VAL ((MUX_BPLL_USER_SEL << 24) \
+ | (MUX_MPLL_USER_SEL << 20) \
+ | (MUX_VPLL_SEL << 16) \
+ | (MUX_EPLL_SEL << 12) \
+ | (MUX_CPLL_SEL << 8) \
+ | (VPLLSRC_SEL))
+/* CLK_SRC_TOP3 */
+#define MUX_ACLK_333_SUB_SEL 0x1
+#define MUX_ACLK_400_SUB_SEL 0x1
+#define MUX_ACLK_266_ISP_SUB_SEL 0x1
+#define MUX_ACLK_266_GPS_SUB_SEL 0x1
+#define MUX_ACLK_300_GSCL_SUB_SEL 0x1
+#define MUX_ACLK_266_GSCL_SUB_SEL 0x1
+#define MUX_ACLK_300_DISP1_SUB_SEL 0x1
+#define MUX_ACLK_200_DISP1_SUB_SEL 0x1
+#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \
+ | (MUX_ACLK_400_SUB_SEL << 20) \
+ | (MUX_ACLK_266_ISP_SUB_SEL << 16) \
+ | (MUX_ACLK_266_GPS_SUB_SEL << 12) \
+ | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \
+ | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \
+ | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
+ | (MUX_ACLK_200_DISP1_SUB_SEL << 4))
+
+/* CLK_DIV_TOP0 */
+#define ACLK_300_RATIO 0x0
+#define ACLK_400_RATIO 0x3
+#define ACLK_333_RATIO 0x2
+#define ACLK_266_RATIO 0x2
+#define ACLK_200_RATIO 0x3
+#define ACLK_166_RATIO 0x5
+#define ACLK_133_RATIO 0x1
+#define ACLK_66_RATIO 0x5
+#define CLK_DIV_TOP0_VAL ((ACLK_300_RATIO << 28) \
+ | (ACLK_400_RATIO << 24) \
+ | (ACLK_333_RATIO << 20) \
+ | (ACLK_266_RATIO << 16) \
+ | (ACLK_200_RATIO << 12) \
+ | (ACLK_166_RATIO << 8) \
+ | (ACLK_133_RATIO << 4) \
+ | (ACLK_66_RATIO))
+
+/* CLK_DIV_TOP1 */
+#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3
+#define ACLK_66_PRE_RATIO 0x1
+#define ACLK_400_ISP_RATIO 0x1
+#define ACLK_400_IOP_RATIO 0x1
+#define ACLK_300_GSCL_RATIO 0x0
+#define ACLK_266_GPS_RATIO 0x7
+
+#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \
+ | (ACLK_66_PRE_RATIO << 24) \
+ | (ACLK_400_ISP_RATIO << 20) \
+ | (ACLK_400_IOP_RATIO << 16) \
+ | (ACLK_300_GSCL_RATIO << 12) \
+ | (ACLK_266_GPS_RATIO << 8))
+
+/* APLL_LOCK */
+#define APLL_LOCK_VAL (0x3E8)
+/* MPLL_LOCK */
+#define MPLL_LOCK_VAL (0x2F1)
+/* CPLL_LOCK */
+#define CPLL_LOCK_VAL (0x3E8)
+/* EPLL_LOCK */
+#define EPLL_LOCK_VAL (0x2321)
+/* VPLL_LOCK */
+#define VPLL_LOCK_VAL (0x2321)
+/* BPLL_LOCK */
+#define BPLL_LOCK_VAL (0x3E8)
+
+/* CLK_SRC_PERIC0 */
+/* SRC_CLOCK = SCLK_MPLL */
+#define PWM_SEL 0
+#define UART4_SEL 6
+#define UART3_SEL 6
+#define UART2_SEL 6
+#define UART1_SEL 6
+#define UART0_SEL 6
+#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \
+ | (UART4_SEL << 16) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL << 0))
+
+#define CLK_SRC_FSYS_VAL 0x66666
+#define CLK_DIV_FSYS0_VAL 0x0BB00000
+#define CLK_DIV_FSYS1_VAL 0x000f000f
+#define CLK_DIV_FSYS2_VAL 0x020f020f
+#define CLK_DIV_FSYS3_VAL 0x000f
+
+/* CLK_DIV_PERIC0 */
+#define UART5_RATIO 8
+#define UART4_RATIO 8
+#define UART3_RATIO 8
+#define UART2_RATIO 8
+#define UART1_RATIO 8
+#define UART0_RATIO 8
+#define CLK_DIV_PERIC0_VAL ((UART4_RATIO << 16) \
+ | (UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO << 0))
+
+/* CLK_DIV_PERIC3 */
+#define PWM_RATIO 8
+#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0)
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL 0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL 0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL 0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL 0x10
+
+/* SCLK_SRC_ISP */
+#define SCLK_SRC_ISP_VAL 0x600
+/* CLK_DIV_ISP0 */
+#define CLK_DIV_ISP0_VAL 0x31
+
+/* CLK_DIV_ISP1 */
+#define CLK_DIV_ISP1_VAL 0x0
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL 0x1
+
+#define MPLL_DEC (MPLL_MDIV * MPLL_MDIV / (MPLL_PDIV * 2^(MPLL_SDIV-1)))
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE 0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET 0xFF
+
+/* DMC Init */
+#define SET 1
+#define RESET 0
+/* (Memory Interleaving Size = 1 << IV_SIZE) */
+#define CONFIG_IV_SIZE 0x07
+
+#define PHY_RESET_VAL (0 << 0)
+
+/*ZQ Configurations */
+#define PHY_CON16_RESET_VAL 0x08000304
+
+#define ZQ_MODE_DDS_VAL (0x5 << 24)
+#define ZQ_MODE_TERM_VAL (0x5 << 21)
+#define SET_ZQ_MODE_DDS_VAL(x) (x = (x & ~(0x7 << 24)) | ZQ_MODE_DDS_VAL)
+#define SET_ZQ_MODE_TERM_VAL(x) (x = (x & ~(0x7 << 21)) | ZQ_MODE_TERM_VAL)
+
+#define ZQ_MODE_NOTERM (1 << 19)
+#define ZQ_CLK_DIV_EN (1 << 18)
+#define ZQ_MANUAL_STR (1 << 1)
+
+/* Channel and Chip Selection */
+#define CONFIG_DMC_CHANNELS 2
+#define CONFIG_CHIPS_PER_CHANNEL 2
+
+#define SET_CMD_CHANNEL(x, y) (x = (x & ~(1 << 28)) | y << 28)
+#define SET_CMD_CHIP(x, y) (x = (x & ~(1 << 20)) | y << 20)
+
+/* Diret Command */
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_MRS1 0x00071C00
+#define DIRECT_CMD_MRS2 0x00010BFC
+#define DIRECT_CMD_MRS3 0x00000708
+#define DIRECT_CMD_MRS4 0x00000818
+#define DIRECT_CMD_PALL 0x01000000
+
+/* DLL Resync */
+#define FP_RSYNC (1 << 3)
+
+#define CONFIG_CTRL_DLL_ON(x, y) (x = (x & ~(1 << 5)) | y << 5)
+#define CONFIG_CTRL_START(x, y) (x = (x & ~(1 << 6)) | y << 6)
+#define SET_CTRL_FORCE_VAL(x, y) (x = (x & ~(0x7F << 8)) | y << 8)
+
+/* RDLVL */
+#define PHY_CON0_RESET_VAL 0x17023240
+#define DDR_MODE_LPDDR2 0x2
+#define BYTE_RDLVL_EN (1 << 13)
+#define CTRL_ATGATE (1 << 6)
+#define SET_CTRL_DDR_MODE(x, y) (x = (x & ~(0x3 << 11)) | y << 11)
+
+#define PHY_CON1_RESET_VAL 0x9210100
+#define RDLVL_RDDATAPADJ 0x1
+#define SET_RDLVL_RDDATAPADJ ((PHY_CON1_RESET_VAL & ~(0xFFFF << 0))\
+ | RDLVL_RDDATAPADJ << 0)
+
+#define PHY_CON2_RESET_VAL 0x00010004
+#define RDLVL_EN (1 << 25)
+#define RDDSKEW_CLEAR (1 << 13)
+
+#define CTRL_RDLVL_DATA_EN (1 << 1)
+#define LPDDR2_ADDR 0x00000208
+
+#define DMC_MEMCONFIG0_VAL 0x00001323
+#define DMC_MEMCONFIG1_VAL 0x00001323
+#define DMC_MEMBASECONFIG0_VAL 0x00400780
+#define DMC_MEMBASECONFIG1_VAL 0x00800780
+#define DMC_MEMCONTROL_VAL 0x00212500
+#define DMC_PRECHCONFIG_VAL 0xFF000000
+#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF
+#define DMC_TIMINGREF_VAL 0x0000005D
+#define DMC_TIMINGROW_VAL 0x2336544C
+#define DMC_TIMINGDATA_VAL 0x24202408
+#define DMC_TIMINGPOWER_VAL 0x38260235
+
+#define CTRL_BSTLEN 0x04
+#define CTRL_RDLAT 0x08
+#define PHY_CON42_VAL (CTRL_BSTLEN << 8 | CTRL_RDLAT << 0)
+
+/* DQS, DQ, DEBUG offsets */
+#define SET_DQS_OFFSET_VAL 0x7F7F7F7F
+#define SET_DQ_OFFSET_VAL 0x7F7F7F7F
+#define SET_DEBUG_OFFSET_VAL 0x7F
+
+#define RESET_DQS_OFFSET_VAL 0x08080808
+#define RESET_DQ_OFFSET_VAL 0x08080808
+#define RESET_DEBUG_OFFSET_VAL 0x8
+
+#define CTRL_PULLD_DQ (0x0F << 8)
+#define CTRL_PULLD_DQS (0x0F << 0)
+
+#define DFI_INIT_START (1 << 28)
+
+#define CLK_STOP_EN (1 << 0)
+#define DPWRDN_EN (1 << 1)
+#define DSREF_EN (1 << 5)
+
+#define AREF_EN (1 << 5)
+void sdelay(unsigned long);
+void mem_ctrl_init(void);
+void system_clock_init(void);
+void tzpc_init(void);
+
+#endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
new file mode 100644
index 000000000..04c863adf
--- /dev/null
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/sromc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+struct exynos5_gpio_part1 *gpio1;
+
+int board_init(void)
+{
+ gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+
+ gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
+ PHYS_SDRAM_2_SIZE);
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
+ PHYS_SDRAM_3_SIZE);
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
+ PHYS_SDRAM_4_SIZE);
+ gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
+ gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
+ PHYS_SDRAM_5_SIZE);
+ gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
+ gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
+ PHYS_SDRAM_6_SIZE);
+ gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
+ gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
+ PHYS_SDRAM_7_SIZE);
+ gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
+ gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
+ PHYS_SDRAM_8_SIZE);
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("\nBoard: SMDK5250\n");
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ int i, err;
+
+ /*
+ * MMC2 SD card GPIO:
+ *
+ * GPC2[0] SD_2_CLK(2)
+ * GPC2[1] SD_2_CMD(2)
+ * GPC2[2] SD_2_CDn
+ * GPC2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ /* GPC2[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2));
+
+ /* GPK2[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X);
+
+ /* GPK2[0:1] pull disable */
+ if (i == 0 || i == 1) {
+ s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE);
+ continue;
+ }
+
+ /* GPK2[2:6] pull up */
+ s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP);
+ }
+
+ err = s5p_mmc_init(2, 4);
+ return err;
+}
+#endif
+
+static void board_uart_init(void)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+ int i;
+
+ /* UART1 GPIOs (part1) : GPA0CON[7:4] 0x2222 */
+ for (i = 4; i < 8; i++) {
+ s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
+ }
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ board_uart_init();
+ return 0;
+}
+#endif
diff --git a/board/samsung/smdk5250/tzpc_init.c b/board/samsung/smdk5250/tzpc_init.c
new file mode 100644
index 000000000..c2ccef338
--- /dev/null
+++ b/board/samsung/smdk5250/tzpc_init.c
@@ -0,0 +1,48 @@
+/*
+ * Lowlevel setup for SMDK5250 board based on S5PC520
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/tzpc.h>
+#include"setup.h"
+
+/* Setting TZPC[TrustZone Protection Controller] */
+void tzpc_init(void)
+{
+ struct exynos5_tzpc *tzpc;
+ unsigned int addr;
+
+ for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+ tzpc = (struct exynos5_tzpc *)addr;
+
+ if (addr == TZPC0_BASE)
+ writel(R0SIZE, &tzpc->r0size);
+
+ writel(DECPROTXSET, &tzpc->decprot0set);
+ writel(DECPROTXSET, &tzpc->decprot1set);
+
+ if (addr != TZPC9_BASE) {
+ writel(DECPROTXSET, &tzpc->decprot2set);
+ writel(DECPROTXSET, &tzpc->decprot3set);
+ }
+ }
+}
diff --git a/boards.cfg b/boards.cfg
index 31e6542f1..6033ac537 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -223,6 +223,7 @@ s5p_goni arm armv7 goni samsung
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
origen arm armv7 origen samsung exynos
s5pc210_universal arm armv7 universal_c210 samsung exynos
+smdk5250 arm armv7 smdk5250 samsung exynos
smdkv310 arm armv7 smdkv310 samsung exynos
trats arm armv7 trats samsung exynos
harmony arm armv7 harmony nvidia tegra2
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
new file mode 100644
index 000000000..67e4012de
--- /dev/null
+++ b/include/configs/smdk5250.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG SMDK5250 (EXYNOS5250) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+#define CONFIG_SMDK5250 /* which is in a SMDK5250 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* input clock of PLL: SMDK5250 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* MACH_TYPE_SMDK5250 macro will be removed once added to mach-types */
+#define MACH_TYPE_SMDK5250 3774
+#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SERIAL1 /* use SERIAL 1 */
+#define CONFIG_BAUDRATE 115200
+#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+
+#define TZPC_BASE_OFFSET 0x10000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_S5P_MMC
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* PWM */
+#define CONFIG_PWM
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "SMDK5250 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_RD_LVL
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
+
+#define CONFIG_NR_DRAM_BANKS 8
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING " for SMDK5250"
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef CONFIG_SECURE_BL1_ONLY
+#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
+#else
+#define CONFIG_SEC_FW_SIZE 0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE (512)
+#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+
+#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_IRAM_STACK 0x02050000
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+#endif /* __CONFIG_H */
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 12:46:49 +0000