diff options
| -rw-r--r-- | README | 8 | ||||
| -rw-r--r-- | common/cmd_ide.c | 29 | ||||
| -rw-r--r-- | include/ide.h | 7 |
3 files changed, 43 insertions, 1 deletions
@@ -2751,6 +2751,14 @@ Low Level (hardware related) configuration options: source code. It is used to make hardware dependant initializations. +- CONFIG_IDE_AHB: + Most IDE controllers were designed to be connected with PCI + interface. Only few of them were designed for AHB interface. + When software is doing ATA command and data transfer to + IDE devices through IDE-AHB controller, some additional + registers accessing to these kind of IDE-AHB controller + is requierd. + - CONFIG_SYS_IMMR: Physical address of the Internal Memory. DO NOT CHANGE unless you know exactly what you're doing! (11-4) [MPC8xx/82xx systems only] diff --git a/common/cmd_ide.c b/common/cmd_ide.c index a1f7e5715..e7952ff8d 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -517,8 +517,20 @@ __ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); + +#if defined(CONFIG_IDE_AHB) + if (port) { + /* write command */ + ide_write_register(dev, port, val); + } else { + /* write data */ + outb(val, (ATA_CURR_BASE(dev))); + } +#else outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); +#endif } + void ide_outb (int dev, int port, unsigned char val) __attribute__((weak, alias("__ide_outb"))); @@ -526,7 +538,13 @@ unsigned char inline __ide_inb(int dev, int port) { uchar val; + +#if defined(CONFIG_IDE_AHB) + val = ide_read_register(dev, port); +#else val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); +#endif + debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val); return val; @@ -695,6 +713,7 @@ void ide_init (void) ide_dev_desc[i].blksz=0; ide_dev_desc[i].lba=0; ide_dev_desc[i].block_read=ide_read; + ide_dev_desc[i].block_write = ide_write; if (!ide_bus_ok[IDE_BUS(i)]) continue; ide_led (led, 1); /* LED on */ @@ -902,7 +921,11 @@ output_data(int dev, ulong *sect_buf, int words) static void output_data(int dev, ulong *sect_buf, int words) { - outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1); +#if defined(CONFIG_IDE_AHB) + ide_write_data(dev, sect_buf, words); +#else + outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); +#endif } #endif /* CONFIG_IDE_SWAP_IO */ @@ -960,7 +983,11 @@ input_data(int dev, ulong *sect_buf, int words) static void input_data(int dev, ulong *sect_buf, int words) { +#if defined(CONFIG_IDE_AHB) + ide_read_data(dev, sect_buf, words); +#else insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); +#endif } #endif /* CONFIG_IDE_SWAP_IO */ diff --git a/include/ide.h b/include/ide.h index 6a1b7ae84..80a10f410 100644 --- a/include/ide.h +++ b/include/ide.h @@ -57,4 +57,11 @@ ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, void *buffer); #if defined(CONFIG_OF_IDE_FIXUP) int ide_device_present(int dev); #endif + +#if defined(CONFIG_IDE_AHB) +unsigned char ide_read_register(int dev, unsigned int port); +void ide_write_register(int dev, unsigned int port, unsigned char val); +void ide_read_data(int dev, ulong *sect_buf, int words); +void ide_write_data(int dev, ulong *sect_buf, int words); +#endif #endif /* _IDE_H */ |