diff options
57 files changed, 586 insertions, 615 deletions
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 226ef57ee..6ef663eeb 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -37,10 +37,6 @@ #include <libfdt.h> #include <fdt_support.h> -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - long int fixed_sdram(void); int board_early_init_f (void) @@ -117,12 +113,6 @@ initdram(int board_type) dram_size = fixed_sdram (); #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 6fed4eaf2..2b17612b3 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -41,10 +41,6 @@ #include "../common/pixis.h" #include "../common/sgmii_riser.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - phys_size_t fixed_sdram(void); int checkboard (void) @@ -65,20 +61,12 @@ initdram(int board_type) #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; #else dram_size = fixed_sdram(); #endif + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 545d869fc..14581abdd 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -38,10 +38,6 @@ #include "../common/pixis.h" #include "../common/sgmii_riser.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -77,12 +73,6 @@ initdram(int board_type) dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index af5ff42e3..c562fc9d9 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -38,10 +38,6 @@ #include "../common/eeprom.h" #include "../common/via.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); @@ -56,7 +52,6 @@ int checkboard (void) uint pci_slot = get_pci_slot (); uint cpu_board_rev = get_cpu_board_revision (); - uint svr; printf ("Board: CDS Version 0x%02x, PCI Slot %d\n", get_board_version (), pci_slot); @@ -69,17 +64,6 @@ int checkboard (void) */ local_bus_init (); - svr = get_svr(); - - /* - * Fix CPU2 errata: A core hang possible while executing a - * msync instruction and a snoopable transaction from an I/O - * master tagged to make quick forward progress is present. - * Fixed in Silicon Rev.2.1 - */ - if (!(SVR_MAJ(svr) >= 2 && SVR_MIN(svr) >= 1)) - ecm->eebpcr |= (1 << 16); - /* * Hack TSEC 3 and 4 IO voltages. */ @@ -118,13 +102,6 @@ initdram(int board_type) dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* * SDRAM Initialization */ @@ -355,7 +332,7 @@ pci_init_board(void) first_free_busno=hose->last_busno+1; printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 688d8c390..bc93be80f 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -99,11 +99,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ }; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - void local_bus_init(void); void sdram_init(void); @@ -170,13 +165,6 @@ initdram(int board_type) dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* * SDRAM Initialization */ diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 3a78c98d1..a14db5ad2 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -38,10 +38,6 @@ #include "../common/pixis.h" #include "../common/sgmii_riser.h" -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - long int fixed_sdram(void); int checkboard (void) @@ -61,20 +57,12 @@ phys_size_t initdram(int board_type) #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; #else dram_size = fixed_sdram(); #endif + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif puts(" DDR: "); return dram_size; } diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 9548ac637..8c073cb4b 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -36,10 +36,6 @@ #include <libfdt.h> #include <fdt_support.h> -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); @@ -66,13 +62,6 @@ int checkboard (void) local_bus_init (); /* - * Fix CPU2 errata: A core hang possible while executing a - * msync instruction and a snoopable transaction from an I/O - * master tagged to make quick forward progress is present. - */ - ecm->eebpcr |= (1 << 16); - - /* * Hack TSEC 3 and 4 IO voltages. */ gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */ @@ -114,12 +103,6 @@ initdram(int board_type) dram_size = fixed_sdram (); #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif /* * SDRAM Initialization */ @@ -429,7 +412,7 @@ pci_init_board(void) first_free_busno=hose->last_busno+1; printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); diff --git a/board/socrates/tlb.c b/board/socrates/tlb.c index b91b1eab6..4591e466b 100644 --- a/board/socrates/tlb.c +++ b/board/socrates/tlb.c @@ -100,6 +100,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_64M, 1), +#if !defined(CONFIG_SPD_EEPROM) /* * TLB 7+8: 512M DDR, cache disabled (needed for memory test) * 0x00000000 512M DDR System memory @@ -114,6 +115,7 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_256M, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 3a828edc1..73f1d01bd 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -610,7 +610,7 @@ static inline void init_pci1(void) first_free_busno = hose->last_busno + 1; #ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { ushort reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 99e551f97..8b19240a8 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -36,178 +36,210 @@ static int usb_stor_curr_dev = -1; /* current device */ #endif /* some display routines (info command) */ -char * usb_get_class_desc(unsigned char dclass) +char *usb_get_class_desc(unsigned char dclass) { - switch(dclass) { - case USB_CLASS_PER_INTERFACE: - return("See Interface"); - case USB_CLASS_AUDIO: - return("Audio"); - case USB_CLASS_COMM: - return("Communication"); - case USB_CLASS_HID: - return("Human Interface"); - case USB_CLASS_PRINTER: - return("Printer"); - case USB_CLASS_MASS_STORAGE: - return("Mass Storage"); - case USB_CLASS_HUB: - return("Hub"); - case USB_CLASS_DATA: - return("CDC Data"); - case USB_CLASS_VENDOR_SPEC: - return("Vendor specific"); - default : - return(""); + switch (dclass) { + case USB_CLASS_PER_INTERFACE: + return "See Interface"; + case USB_CLASS_AUDIO: + return "Audio"; + case USB_CLASS_COMM: + return "Communication"; + case USB_CLASS_HID: + return "Human Interface"; + case USB_CLASS_PRINTER: + return "Printer"; + case USB_CLASS_MASS_STORAGE: + return "Mass Storage"; + case USB_CLASS_HUB: + return "Hub"; + case USB_CLASS_DATA: + return "CDC Data"; + case USB_CLASS_VENDOR_SPEC: + return "Vendor specific"; + default: + return ""; } } -void usb_display_class_sub(unsigned char dclass,unsigned char subclass,unsigned char proto) +void usb_display_class_sub(unsigned char dclass, unsigned char subclass, + unsigned char proto) { - switch(dclass) { - case USB_CLASS_PER_INTERFACE: - printf("See Interface"); + switch (dclass) { + case USB_CLASS_PER_INTERFACE: + printf("See Interface"); + break; + case USB_CLASS_HID: + printf("Human Interface, Subclass: "); + switch (subclass) { + case USB_SUB_HID_NONE: + printf("None"); break; - case USB_CLASS_HID: - printf("Human Interface, Subclass: "); - switch(subclass) { - case USB_SUB_HID_NONE: - printf("None"); - break; - case USB_SUB_HID_BOOT: - printf("Boot "); - switch(proto) { - case USB_PROT_HID_NONE: - printf("None"); - break; - case USB_PROT_HID_KEYBOARD: - printf("Keyboard"); - break; - case USB_PROT_HID_MOUSE: - printf("Mouse"); - break; - default: - printf("reserved"); - } - break; - default: - printf("reserved"); + case USB_SUB_HID_BOOT: + printf("Boot "); + switch (proto) { + case USB_PROT_HID_NONE: + printf("None"); + break; + case USB_PROT_HID_KEYBOARD: + printf("Keyboard"); + break; + case USB_PROT_HID_MOUSE: + printf("Mouse"); + break; + default: + printf("reserved"); + break; } break; - case USB_CLASS_MASS_STORAGE: - printf("Mass Storage, "); - switch(subclass) { - case US_SC_RBC: - printf("RBC "); - break; - case US_SC_8020: - printf("SFF-8020i (ATAPI)"); - break; - case US_SC_QIC: - printf("QIC-157 (Tape)"); - break; - case US_SC_UFI: - printf("UFI"); - break; - case US_SC_8070: - printf("SFF-8070"); - break; - case US_SC_SCSI: - printf("Transp. SCSI"); - break; - default: - printf("reserved"); - break; - } - printf(", "); - switch(proto) { - case US_PR_CB: - printf("Command/Bulk"); - break; - case US_PR_CBI: - printf("Command/Bulk/Int"); - break; - case US_PR_BULK: - printf("Bulk only"); - break; - default: - printf("reserved"); - } + default: + printf("reserved"); + break; + } + break; + case USB_CLASS_MASS_STORAGE: + printf("Mass Storage, "); + switch (subclass) { + case US_SC_RBC: + printf("RBC "); + break; + case US_SC_8020: + printf("SFF-8020i (ATAPI)"); + break; + case US_SC_QIC: + printf("QIC-157 (Tape)"); + break; + case US_SC_UFI: + printf("UFI"); + break; + case US_SC_8070: + printf("SFF-8070"); + break; + case US_SC_SCSI: + printf("Transp. SCSI"); + break; + default: + printf("reserved"); + break; + } + printf(", "); + switch (proto) { + case US_PR_CB: + printf("Command/Bulk"); + break; + case US_PR_CBI: + printf("Command/Bulk/Int"); + break; + case US_PR_BULK: + printf("Bulk only"); break; default: - printf("%s",usb_get_class_desc(dclass)); + printf("reserved"); + break; + } + break; + default: + printf("%s", usb_get_class_desc(dclass)); + break; } } -void usb_display_string(struct usb_device *dev,int index) +void usb_display_string(struct usb_device *dev, int index) { char buffer[256]; - if (index!=0) { - if (usb_string(dev,index,&buffer[0],256)>0); - printf("String: \"%s\"",buffer); + if (index != 0) { + if (usb_string(dev, index, &buffer[0], 256) > 0) + printf("String: \"%s\"", buffer); } } void usb_display_desc(struct usb_device *dev) { - if (dev->descriptor.bDescriptorType==USB_DT_DEVICE) { - printf("%d: %s, USB Revision %x.%x\n",dev->devnum,usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass), - (dev->descriptor.bcdUSB>>8) & 0xff,dev->descriptor.bcdUSB & 0xff); - if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial)) - printf(" - %s %s %s\n",dev->mf,dev->prod,dev->serial); + if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) { + printf("%d: %s, USB Revision %x.%x\n", dev->devnum, + usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass), + (dev->descriptor.bcdUSB>>8) & 0xff, + dev->descriptor.bcdUSB & 0xff); + + if (strlen(dev->mf) || strlen(dev->prod) || + strlen(dev->serial)) + printf(" - %s %s %s\n", dev->mf, dev->prod, + dev->serial); if (dev->descriptor.bDeviceClass) { printf(" - Class: "); - usb_display_class_sub(dev->descriptor.bDeviceClass,dev->descriptor.bDeviceSubClass,dev->descriptor.bDeviceProtocol); + usb_display_class_sub(dev->descriptor.bDeviceClass, + dev->descriptor.bDeviceSubClass, + dev->descriptor.bDeviceProtocol); printf("\n"); + } else { + printf(" - Class: (from Interface) %s\n", + usb_get_class_desc( + dev->config.if_desc[0].bInterfaceClass)); } - else { - printf(" - Class: (from Interface) %s\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass)); - } - printf(" - PacketSize: %d Configurations: %d\n",dev->descriptor.bMaxPacketSize0,dev->descriptor.bNumConfigurations); - printf(" - Vendor: 0x%04x Product 0x%04x Version %d.%d\n",dev->descriptor.idVendor,dev->descriptor.idProduct,(dev->descriptor.bcdDevice>>8) & 0xff,dev->descriptor.bcdDevice & 0xff); + printf(" - PacketSize: %d Configurations: %d\n", + dev->descriptor.bMaxPacketSize0, + dev->descriptor.bNumConfigurations); + printf(" - Vendor: 0x%04x Product 0x%04x Version %d.%d\n", + dev->descriptor.idVendor, dev->descriptor.idProduct, + (dev->descriptor.bcdDevice>>8) & 0xff, + dev->descriptor.bcdDevice & 0xff); } } -void usb_display_conf_desc(struct usb_config_descriptor *config,struct usb_device *dev) +void usb_display_conf_desc(struct usb_config_descriptor *config, + struct usb_device *dev) { - printf(" Configuration: %d\n",config->bConfigurationValue); - printf(" - Interfaces: %d %s%s%dmA\n",config->bNumInterfaces,(config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ", - (config->bmAttributes & 0x20) ? "Remote Wakeup " : "",config->MaxPower*2); + printf(" Configuration: %d\n", config->bConfigurationValue); + printf(" - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces, + (config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ", + (config->bmAttributes & 0x20) ? "Remote Wakeup " : "", + config->MaxPower*2); if (config->iConfiguration) { printf(" - "); - usb_display_string(dev,config->iConfiguration); + usb_display_string(dev, config->iConfiguration); printf("\n"); } } -void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,struct usb_device *dev) +void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, + struct usb_device *dev) { - printf(" Interface: %d\n",ifdesc->bInterfaceNumber); - printf(" - Alternate Setting %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints); + printf(" Interface: %d\n", ifdesc->bInterfaceNumber); + printf(" - Alternate Setting %d, Endpoints: %d\n", + ifdesc->bAlternateSetting, ifdesc->bNumEndpoints); printf(" - Class "); - usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol); + usb_display_class_sub(ifdesc->bInterfaceClass, + ifdesc->bInterfaceSubClass, ifdesc->bInterfaceProtocol); printf("\n"); if (ifdesc->iInterface) { printf(" - "); - usb_display_string(dev,ifdesc->iInterface); + usb_display_string(dev, ifdesc->iInterface); printf("\n"); } } void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) { - printf(" - Endpoint %d %s ",epdesc->bEndpointAddress & 0xf,(epdesc->bEndpointAddress & 0x80) ? "In" : "Out"); - switch((epdesc->bmAttributes & 0x03)) - { - case 0: printf("Control"); break; - case 1: printf("Isochronous"); break; - case 2: printf("Bulk"); break; - case 3: printf("Interrupt"); break; + printf(" - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf, + (epdesc->bEndpointAddress & 0x80) ? "In" : "Out"); + switch ((epdesc->bmAttributes & 0x03)) { + case 0: + printf("Control"); + break; + case 1: + printf("Isochronous"); + break; + case 2: + printf("Bulk"); + break; + case 3: + printf("Interrupt"); + break; } - printf(" MaxPacket %d",epdesc->wMaxPacketSize); - if ((epdesc->bmAttributes & 0x03)==0x3) - printf(" Interval %dms",epdesc->bInterval); + printf(" MaxPacket %d", epdesc->wMaxPacketSize); + if ((epdesc->bmAttributes & 0x03) == 0x3) + printf(" Interval %dms", epdesc->bInterval); printf("\n"); } @@ -217,15 +249,15 @@ void usb_display_config(struct usb_device *dev) struct usb_config_descriptor *config; struct usb_interface_descriptor *ifdesc; struct usb_endpoint_descriptor *epdesc; - int i,ii; + int i, ii; - config= &dev->config; - usb_display_conf_desc(config,dev); - for(i=0;i<config->no_of_if;i++) { - ifdesc= &config->if_desc[i]; - usb_display_if_desc(ifdesc,dev); - for(ii=0;ii<ifdesc->no_of_ep;ii++) { - epdesc= &ifdesc->ep_desc[ii]; + config = &dev->config; + usb_display_conf_desc(config, dev); + for (i = 0; i < config->no_of_if; i++) { + ifdesc = &config->if_desc[i]; + usb_display_if_desc(ifdesc, dev); + for (ii = 0; ii < ifdesc->no_of_ep; ii++) { + epdesc = &ifdesc->ep_desc[ii]; usb_display_ep_desc(epdesc); } } @@ -233,31 +265,33 @@ void usb_display_config(struct usb_device *dev) } /* shows the device tree recursively */ -void usb_show_tree_graph(struct usb_device *dev,char *pre) +void usb_show_tree_graph(struct usb_device *dev, char *pre) { - int i,index; - int has_child,last_child,port; + int i, index; + int has_child, last_child, port; - index=strlen(pre); - printf(" %s",pre); + index = strlen(pre); + printf(" %s", pre); /* check if the device has connected children */ - has_child=0; - for(i=0;i<dev->maxchild;i++) { - if (dev->children[i]!=NULL) - has_child=1; + has_child = 0; + for (i = 0; i < dev->maxchild; i++) { + if (dev->children[i] != NULL) + has_child = 1; } /* check if we are the last one */ - last_child=1; - if (dev->parent!=NULL) { - for(i=0;i<dev->parent->maxchild;i++) { + last_child = 1; + if (dev->parent != NULL) { + for (i = 0; i < dev->parent->maxchild; i++) { /* search for children */ - if (dev->parent->children[i]==dev) { - /* found our pointer, see if we have a little sister */ - port=i; - while(i++<dev->parent->maxchild) { - if (dev->parent->children[i]!=NULL) { + if (dev->parent->children[i] == dev) { + /* found our pointer, see if we have a + * little sister + */ + port = i; + while (i++ < dev->parent->maxchild) { + if (dev->parent->children[i] != NULL) { /* found a sister */ - last_child=0; + last_child = 0; break; } /* if */ } /* while */ @@ -265,28 +299,27 @@ void usb_show_tree_graph(struct usb_device *dev,char *pre) } /* for all children of the parent */ printf("\b+-"); /* correct last child */ - if (last_child) { - pre[index-1]=' '; - } + if (last_child) + pre[index-1] = ' '; } /* if not root hub */ else printf(" "); - printf("%d ",dev->devnum); - pre[index++]=' '; - pre[index++]= has_child ? '|' : ' '; - pre[index]=0; - printf(" %s (%s, %dmA)\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass), - dev->slow ? "1.5MBit/s" : "12MBit/s",dev->config.MaxPower * 2); - if (strlen(dev->mf) || - strlen(dev->prod) || - strlen(dev->serial)) - printf(" %s %s %s %s\n",pre,dev->mf,dev->prod,dev->serial); - printf(" %s\n",pre); - if (dev->maxchild>0) { - for(i=0;i<dev->maxchild;i++) { - if (dev->children[i]!=NULL) { - usb_show_tree_graph(dev->children[i],pre); - pre[index]=0; + printf("%d ", dev->devnum); + pre[index++] = ' '; + pre[index++] = has_child ? '|' : ' '; + pre[index] = 0; + printf(" %s (%s, %dmA)\n", usb_get_class_desc( + dev->config.if_desc[0].bInterfaceClass), + dev->slow ? "1.5MBit/s" : "12MBit/s", + dev->config.MaxPower * 2); + if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial)) + printf(" %s %s %s %s\n", pre, dev->mf, dev->prod, dev->serial); + printf(" %s\n", pre); + if (dev->maxchild > 0) { + for (i = 0; i < dev->maxchild; i++) { + if (dev->children[i] != NULL) { + usb_show_tree_graph(dev->children[i], pre); + pre[index] = 0; } } } @@ -297,8 +330,8 @@ void usb_show_tree(struct usb_device *dev) { char preamble[32]; - memset(preamble,0,32); - usb_show_tree_graph(dev,&preamble[0]); + memset(preamble, 0, 32); + usb_show_tree_graph(dev, &preamble[0]); } @@ -306,11 +339,11 @@ void usb_show_tree(struct usb_device *dev) * usb boot command intepreter. Derived from diskboot */ #ifdef CONFIG_USB_STORAGE -int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { char *boot_device = NULL; char *ep; - int dev, part=1, rcode; + int dev, part = 1, rcode; ulong addr, cnt; disk_partition_t info; image_header_t *hdr; @@ -322,95 +355,98 @@ int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) switch (argc) { case 1: addr = CONFIG_SYS_LOAD_ADDR; - boot_device = getenv ("bootdevice"); + boot_device = getenv("bootdevice"); break; case 2: addr = simple_strtoul(argv[1], NULL, 16); - boot_device = getenv ("bootdevice"); + boot_device = getenv("bootdevice"); break; case 3: addr = simple_strtoul(argv[1], NULL, 16); boot_device = argv[2]; break; default: - printf ("Usage:\n%s\n", cmdtp->usage); + printf("Usage:\n%s\n", cmdtp->usage); return 1; } if (!boot_device) { - puts ("\n** No boot device **\n"); + puts("\n** No boot device **\n"); return 1; } dev = simple_strtoul(boot_device, &ep, 16); - stor_dev=usb_stor_get_dev(dev); + stor_dev = usb_stor_get_dev(dev); if (stor_dev->type == DEV_TYPE_UNKNOWN) { - printf ("\n** Device %d not available\n", dev); + printf("\n** Device %d not available\n", dev); return 1; } - if (stor_dev->block_read==NULL) { + if (stor_dev->block_read == NULL) { printf("storage device not initialized. Use usb scan\n"); return 1; } if (*ep) { if (*ep != ':') { - puts ("\n** Invalid boot device, use `dev[:part]' **\n"); + puts("\n** Invalid boot device, use `dev[:part]' **\n"); return 1; } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (stor_dev, part, &info)) { + if (get_partition_info(stor_dev, part, &info)) { /* try to boot raw .... */ - strncpy((char *)&info.type[0], BOOT_PART_TYPE, sizeof(BOOT_PART_TYPE)); + strncpy((char *)&info.type[0], BOOT_PART_TYPE, + sizeof(BOOT_PART_TYPE)); strncpy((char *)&info.name[0], "Raw", 4); - info.start=0; - info.blksz=0x200; - info.size=2880; + info.start = 0; + info.blksz = 0x200; + info.size = 2880; printf("error reading partinfo...try to boot raw\n"); } - if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) && - (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) { - printf ("\n** Invalid partition type \"%.32s\"" + if ((strncmp((char *)info.type, BOOT_PART_TYPE, + sizeof(info.type)) != 0) && + (strncmp((char *)info.type, BOOT_PART_COMP, + sizeof(info.type)) != 0)) { + printf("\n** Invalid partition type \"%.32s\"" " (expect \"" BOOT_PART_TYPE "\")\n", info.type); return 1; } - printf ("\nLoading from USB device %d, partition %d: " + printf("\nLoading from USB device %d, partition %d: " "Name: %.32s Type: %.32s\n", dev, part, info.name, info.type); - debug ("First Block: %ld, # of blocks: %ld, Block Size: %ld\n", + debug("First Block: %ld, # of blocks: %ld, Block Size: %ld\n", info.start, info.size, info.blksz); if (stor_dev->block_read(dev, info.start, 1, (ulong *)addr) != 1) { - printf ("** Read error on %d:%d\n", dev, part); + printf("** Read error on %d:%d\n", dev, part); return 1; } - switch (genimg_get_format ((void *)addr)) { + switch (genimg_get_format((void *)addr)) { case IMAGE_FORMAT_LEGACY: hdr = (image_header_t *)addr; - if (!image_check_hcrc (hdr)) { - puts ("\n** Bad Header Checksum **\n"); + if (!image_check_hcrc(hdr)) { + puts("\n** Bad Header Checksum **\n"); return 1; } - image_print_contents (hdr); + image_print_contents(hdr); - cnt = image_get_image_size (hdr); + cnt = image_get_image_size(hdr); break; #if defined(CONFIG_FIT) case IMAGE_FORMAT_FIT: fit_hdr = (const void *)addr; - puts ("Fit image detected...\n"); + puts("Fit image detected...\n"); - cnt = fit_get_size (fit_hdr); + cnt = fit_get_size(fit_hdr); break; #endif default: - puts ("** Unknown image type\n"); + puts("** Unknown image type\n"); return 1; } @@ -418,36 +454,38 @@ int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt /= info.blksz; cnt -= 1; - if (stor_dev->block_read (dev, info.start+1, cnt, + if (stor_dev->block_read(dev, info.start+1, cnt, (ulong *)(addr+info.blksz)) != cnt) { - printf ("\n** Read error on %d:%d\n", dev, part); + printf("\n** Read error on %d:%d\n", dev, part); return 1; } #if defined(CONFIG_FIT) - /* This cannot be done earlier, we need complete FIT image in RAM first */ - if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) { - if (!fit_check_format (fit_hdr)) { - puts ("** Bad FIT image format\n"); + /* This cannot be done earlier, we need complete FIT image in RAM + * first + */ + if (genimg_get_format((void *)addr) == IMAGE_FORMAT_FIT) { + if (!fit_check_format(fit_hdr)) { + puts("** Bad FIT image format\n"); return 1; } - fit_print_contents (fit_hdr); + fit_print_contents(fit_hdr); } #endif /* Loading ok, update default load address */ load_addr = addr; - flush_cache (addr, (cnt+1)*info.blksz); + flush_cache(addr, (cnt+1)*info.blksz); /* Check if we should attempt an auto-start */ - if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) { + if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) { char *local_args[2]; - extern int do_bootm (cmd_tbl_t *, int, int, char *[]); + extern int do_bootm(cmd_tbl_t *, int, int, char *[]); local_args[0] = argv[0]; local_args[1] = NULL; - printf ("Automatic boot of image at addr 0x%08lX ...\n", addr); - rcode=do_bootm (cmdtp, 0, 1, local_args); + printf("Automatic boot of image at addr 0x%08lX ...\n", addr); + rcode = do_bootm(cmdtp, 0, 1, local_args); return rcode; } return 0; @@ -455,10 +493,10 @@ int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif /* CONFIG_USB_STORAGE */ -/********************************************************************************* +/****************************************************************************** * usb command intepreter */ -int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int i; @@ -469,7 +507,7 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif if ((strncmp(argv[1], "reset", 5) == 0) || - (strncmp(argv[1], "start", 5) == 0)){ + (strncmp(argv[1], "start", 5) == 0)) { usb_stop(); printf("(Re)start USB...\n"); i = usb_init(); @@ -480,16 +518,17 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif return 0; } - if (strncmp(argv[1],"stop",4) == 0) { + if (strncmp(argv[1], "stop", 4) == 0) { #ifdef CONFIG_USB_KEYBOARD - if (argc==2) { - if (usb_kbd_deregister()!=0) { - printf("USB not stopped: usbkbd still using USB\n"); + if (argc == 2) { + if (usb_kbd_deregister() != 0) { + printf("USB not stopped: usbkbd still" + " using USB\n"); return 1; } - } - else { /* forced stop, switch console in to serial */ - console_assign(stdin,"serial"); + } else { + /* forced stop, switch console in to serial */ + console_assign(stdin, "serial"); usb_kbd_deregister(); } #endif @@ -501,40 +540,38 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf("USB is stopped. Please issue 'usb start' first.\n"); return 1; } - if (strncmp(argv[1],"tree",4) == 0) { + if (strncmp(argv[1], "tree", 4) == 0) { printf("\nDevice Tree:\n"); usb_show_tree(usb_get_dev_index(0)); return 0; } - if (strncmp(argv[1],"inf",3) == 0) { + if (strncmp(argv[1], "inf", 3) == 0) { int d; - if (argc==2) { - for(d=0;d<USB_MAX_DEVICE;d++) { - dev=usb_get_dev_index(d); - if (dev==NULL) + if (argc == 2) { + for (d = 0; d < USB_MAX_DEVICE; d++) { + dev = usb_get_dev_index(d); + if (dev == NULL) break; usb_display_desc(dev); usb_display_config(dev); } return 0; - } - else { + } else { int d; - i=simple_strtoul(argv[2], NULL, 16); - printf("config for device %d\n",i); - for(d=0;d<USB_MAX_DEVICE;d++) { - dev=usb_get_dev_index(d); - if (dev==NULL) + i = simple_strtoul(argv[2], NULL, 16); + printf("config for device %d\n", i); + for (d = 0; d < USB_MAX_DEVICE; d++) { + dev = usb_get_dev_index(d); + if (dev == NULL) break; - if (dev->devnum==i) + if (dev->devnum == i) break; } - if (dev==NULL) { + if (dev == NULL) { printf("*** NO Device avaiable ***\n"); return 0; - } - else { + } else { usb_display_desc(dev); usb_display_config(dev); } @@ -542,37 +579,28 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } #ifdef CONFIG_USB_STORAGE - if (strncmp(argv[1], "scan", 4) == 0) { - printf(" NOTE: this command is obsolete and will be phased out\n"); - printf(" please use 'usb storage' for USB storage devices information\n\n"); - usb_stor_info(); - return 0; - } - - if (strncmp(argv[1], "stor", 4) == 0) { + if (strncmp(argv[1], "stor", 4) == 0) return usb_stor_info(); - } - if (strncmp(argv[1],"part",4) == 0) { + if (strncmp(argv[1], "part", 4) == 0) { int devno, ok = 0; - if (argc==2) { - for (devno=0; devno<USB_MAX_STOR_DEV; ++devno) { - stor_dev=usb_stor_get_dev(devno); - if (stor_dev->type!=DEV_TYPE_UNKNOWN) { + if (argc == 2) { + for (devno = 0; devno < USB_MAX_STOR_DEV; ++devno) { + stor_dev = usb_stor_get_dev(devno); + if (stor_dev->type != DEV_TYPE_UNKNOWN) { ok++; if (devno) printf("\n"); - printf("print_part of %x\n",devno); + printf("print_part of %x\n", devno); print_part(stor_dev); } } - } - else { - devno=simple_strtoul(argv[2], NULL, 16); - stor_dev=usb_stor_get_dev(devno); - if (stor_dev->type!=DEV_TYPE_UNKNOWN) { + } else { + devno = simple_strtoul(argv[2], NULL, 16); + stor_dev = usb_stor_get_dev(devno); + if (stor_dev->type != DEV_TYPE_UNKNOWN) { ok++; - printf("print_part of %x\n",devno); + printf("print_part of %x\n", devno); print_part(stor_dev); } } @@ -582,22 +610,24 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } return 0; } - if (strcmp(argv[1],"read") == 0) { - if (usb_stor_curr_dev<0) { + if (strcmp(argv[1], "read") == 0) { + if (usb_stor_curr_dev < 0) { printf("no current device selected\n"); return 1; } - if (argc==5) { + if (argc == 5) { unsigned long addr = simple_strtoul(argv[2], NULL, 16); unsigned long blk = simple_strtoul(argv[3], NULL, 16); unsigned long cnt = simple_strtoul(argv[4], NULL, 16); unsigned long n; - printf ("\nUSB read: device %d block # %ld, count %ld ... ", - usb_stor_curr_dev, blk, cnt); - stor_dev=usb_stor_get_dev(usb_stor_curr_dev); - n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt, (ulong *)addr); - printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR"); - if (n==cnt) + printf("\nUSB read: device %d block # %ld, count %ld" + " ... ", usb_stor_curr_dev, blk, cnt); + stor_dev = usb_stor_get_dev(usb_stor_curr_dev); + n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt, + (ulong *)addr); + printf("%ld blocks read: %s\n", n, + (n == cnt) ? "OK" : "ERROR"); + if (n == cnt) return 0; return 1; } @@ -605,34 +635,31 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (strncmp(argv[1], "dev", 3) == 0) { if (argc == 3) { int dev = (int)simple_strtoul(argv[2], NULL, 10); - printf ("\nUSB device %d: ", dev); + printf("\nUSB device %d: ", dev); if (dev >= USB_MAX_STOR_DEV) { printf("unknown device\n"); return 1; } - printf ("\n Device %d: ", dev); - stor_dev=usb_stor_get_dev(dev); + printf("\n Device %d: ", dev); + stor_dev = usb_stor_get_dev(dev); dev_print(stor_dev); - if (stor_dev->type == DEV_TYPE_UNKNOWN) { + if (stor_dev->type == DEV_TYPE_UNKNOWN) return 1; - } usb_stor_curr_dev = dev; printf("... is now current device\n"); return 0; - } - else { - printf ("\nUSB device %d: ", usb_stor_curr_dev); - stor_dev=usb_stor_get_dev(usb_stor_curr_dev); + } else { + printf("\nUSB device %d: ", usb_stor_curr_dev); + stor_dev = usb_stor_get_dev(usb_stor_curr_dev); dev_print(stor_dev); - if (stor_dev->type == DEV_TYPE_UNKNOWN) { + if (stor_dev->type == DEV_TYPE_UNKNOWN) return 1; - } return 0; } return 0; } #endif /* CONFIG_USB_STORAGE */ - printf ("Usage:\n%s\n", cmdtp->usage); + printf("Usage:\n%s\n", cmdtp->usage); return 1; } @@ -646,7 +673,8 @@ U_BOOT_CMD( "usb info [dev] - show available USB devices\n" "usb storage - show details of USB storage devices\n" "usb dev [dev] - show or set current USB storage device\n" - "usb part [dev] - print partition table of one or all USB storage devices\n" + "usb part [dev] - print partition table of one or all USB storage" + " devices\n" "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" " to memory address `addr'\n" ); diff --git a/common/env_onenand.c b/common/env_onenand.c index 3c65b3e48..dbccc7912 100644 --- a/common/env_onenand.c +++ b/common/env_onenand.c @@ -97,6 +97,7 @@ int saveenv(void) instr.len = CONFIG_ENV_SIZE; instr.addr = env_addr; + instr.mtd = &onenand_mtd; if (onenand_erase(&onenand_mtd, &instr)) { printf("OneNAND: erase failed at 0x%08lx\n", env_addr); return 1; diff --git a/common/usb.c b/common/usb.c index 7ab5df670..ee181528c 100644 --- a/common/usb.c +++ b/common/usb.c @@ -58,7 +58,7 @@ #undef USB_DEBUG #ifdef USB_DEBUG -#define USB_PRINTF(fmt, args...) printf (fmt , ##args) +#define USB_PRINTF(fmt, args...) printf(fmt , ##args) #else #define USB_PRINTF(fmt, args...) #endif @@ -87,11 +87,12 @@ static int hub_port_reset(struct usb_device *dev, int port, * wait_ms */ -void __inline__ wait_ms(unsigned long ms) +inline void wait_ms(unsigned long ms) { while (ms-- > 0) udelay(1000); } + /*************************************************************************** * Init USB Device */ @@ -245,9 +246,9 @@ int usb_maxpacket(struct usb_device *dev, unsigned long pipe) { /* direction is out -> use emaxpacket out */ if ((pipe & USB_DIR_IN) == 0) - return(dev->epmaxpacketout[((pipe>>15) & 0xf)]); + return dev->epmaxpacketout[((pipe>>15) & 0xf)]; else - return(dev->epmaxpacketin[((pipe>>15) & 0xf)]); + return dev->epmaxpacketin[((pipe>>15) & 0xf)]; } /* The routine usb_set_maxpacket_ep() is extracted from the loop of routine @@ -269,7 +270,7 @@ usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep) USB_ENDPOINT_XFER_CONTROL) { /* Control => bidirectional */ dev->epmaxpacketout[b] = ep->wMaxPacketSize; - dev->epmaxpacketin [b] = ep->wMaxPacketSize; + dev->epmaxpacketin[b] = ep->wMaxPacketSize; USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n", b, dev->epmaxpacketin[b]); } else { @@ -779,13 +780,13 @@ int usb_new_device(struct usb_device *dev) * invalid header while reading 8 bytes as device descriptor. */ dev->descriptor.bMaxPacketSize0 = 8; /* Start off at 8 bytes */ dev->maxpacketsize = PACKET_SIZE_8; - dev->epmaxpacketin [0] = 8; + dev->epmaxpacketin[0] = 8; dev->epmaxpacketout[0] = 8; err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8); if (err < 8) { printf("\n USB device not responding, " \ - "giving up (status=%lX)\n",dev->status); + "giving up (status=%lX)\n", dev->status); return 1; } #else @@ -793,7 +794,8 @@ int usb_new_device(struct usb_device *dev) * reset of the device (Linux uses the same sequence) * Some equipment is said to work only with such init sequence; this * patch is based on the work by Alan Stern: - * http://sourceforge.net/mailarchive/forum.php?thread_id=5729457&forum_id=5398 + * http://sourceforge.net/mailarchive/forum.php? + * thread_id=5729457&forum_id=5398 */ struct usb_device_descriptor *desc; int port = -1; @@ -809,7 +811,7 @@ int usb_new_device(struct usb_device *dev) dev->descriptor.bMaxPacketSize0 = 64; /* Start off at 64 bytes */ /* Default to 64 byte max packet size */ dev->maxpacketsize = PACKET_SIZE_64; - dev->epmaxpacketin [0] = 64; + dev->epmaxpacketin[0] = 64; dev->epmaxpacketout[0] = 64; err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64); @@ -844,13 +846,21 @@ int usb_new_device(struct usb_device *dev) } #endif - dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0; + dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0; dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0; switch (dev->descriptor.bMaxPacketSize0) { - case 8: dev->maxpacketsize = PACKET_SIZE_8; break; - case 16: dev->maxpacketsize = PACKET_SIZE_16; break; - case 32: dev->maxpacketsize = PACKET_SIZE_32; break; - case 64: dev->maxpacketsize = PACKET_SIZE_64; break; + case 8: + dev->maxpacketsize = PACKET_SIZE_8; + break; + case 16: + dev->maxpacketsize = PACKET_SIZE_16; + break; + case 32: + dev->maxpacketsize = PACKET_SIZE_32; + break; + case 64: + dev->maxpacketsize = PACKET_SIZE_64; + break; } dev->devnum = addr; @@ -947,7 +957,7 @@ void usb_scan_devices(void) #undef USB_HUB_DEBUG #ifdef USB_HUB_DEBUG -#define USB_HUB_PRINTF(fmt, args...) printf (fmt , ##args) +#define USB_HUB_PRINTF(fmt, args...) printf(fmt , ##args) #else #define USB_HUB_PRINTF(fmt, args...) #endif diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 3a8aef20d..0b7c60971 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -132,6 +132,12 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm) /* We run cpu_init_early_f in AS = 1 */ void cpu_init_early_f(void) { + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset ((void *) gd, 0, sizeof (gd_t)); + set_tlb(0, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 1, 0, BOOKE_PAGESZ_4K, 0); @@ -140,24 +146,19 @@ void cpu_init_early_f(void) #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) { u32 temp; + volatile u32 *ccsr_virt = + (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); - set_tlb(0, CONFIG_SYS_CCSRBAR_DEFAULT, CONFIG_SYS_CCSRBAR_DEFAULT, + set_tlb(0, (u32)ccsr_virt, CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 1, 1, BOOKE_PAGESZ_4K, 0); - temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR_DEFAULT); - out_be32((volatile u32 *)CONFIG_SYS_CCSRBAR_DEFAULT, CONFIG_SYS_CCSRBAR_PHYS >> 12); - + temp = in_be32(ccsr_virt); + out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12); temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR); } #endif - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - init_laws(); invalidate_tlb(0); init_tlbs(); @@ -174,6 +175,19 @@ void cpu_init_f (void) { volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); extern void m8560_cpm_reset (void); +#ifdef CONFIG_MPC8548 + ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); + uint svr = get_svr(); + + /* + * CPU2 errata workaround: A core hang possible while executing + * a msync instruction and a snoopable transaction from an I/O + * master tagged to make quick forward progress is present. + * Fixed in silicon rev 2.1. + */ + if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0))) + out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16)); +#endif disable_tlb(14); disable_tlb(15); diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 112f18c2b..787c6eb74 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -70,7 +70,7 @@ pci_mpc85xx_init(struct pci_controller *board_hose) */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - if (!(gur->pordevsr & PORDEVSR_PCI)) { + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) printf("PCI-X will only work at 66 MHz\n"); diff --git a/cpu/mpc8xxx/ddr/main.c b/cpu/mpc8xxx/ddr/main.c index 21a16d97e..f1ad13286 100644 --- a/cpu/mpc8xxx/ddr/main.c +++ b/cpu/mpc8xxx/ddr/main.c @@ -475,9 +475,14 @@ phys_size_t fsl_ddr_sdram(void) */ memctl_interleaved = 1; } else { - printf("Error: memctl interleaving not " + printf("Warning: memctl interleaving not " "properly configured on all controllers\n"); - while (1); + memctl_interleaved = 0; + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) + info.memctl_opts[i].memctl_interleaving = 0; + debug("Recomputing with memctl_interleaving off.\n"); + total_memory = fsl_ddr_compute(&info, + STEP_ASSIGN_ADDRESSES); } } diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c index 714e88d7f..af7f73a83 100644 --- a/cpu/mpc8xxx/ddr/options.c +++ b/cpu/mpc8xxx/ddr/options.c @@ -197,10 +197,10 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, */ if ((p = getenv("memctl_intlv_ctl")) != NULL) { if (pdimm[0].n_ranks == 0) { - printf("There is no rank on CS0. Because only rank on \ - CS0 and ranks chip-select interleaved with CS0\ - are controller interleaved, force non memory \ - controller interleaving\n"); + printf("There is no rank on CS0. Because only rank on " + "CS0 and ranks chip-select interleaved with CS0" + " are controller interleaved, force non memory " + "controller interleaving\n"); popts->memctl_interleaving = 0; } else { popts->memctl_interleaving = 1; @@ -239,22 +239,22 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, case FSL_DDR_CS0_CS1: if (pdimm[0].n_ranks != 2) { popts->ba_intlv_ctl = 0; - printf("No enough bank(chip-select) for \ - CS0+CS1, force non-interleaving!\n"); + printf("Not enough bank(chip-select) for " + "CS0+CS1, force non-interleaving!\n"); } break; case FSL_DDR_CS2_CS3: if (pdimm[1].n_ranks !=2){ popts->ba_intlv_ctl = 0; - printf("No enough bank(CS) for CS2+CS3, \ - force non-interleaving!\n"); + printf("Not enough bank(CS) for CS2+CS3, " + "force non-interleaving!\n"); } break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) { popts->ba_intlv_ctl = 0; - printf("No enough bank(CS) for CS0+CS1 or \ - CS2+CS3, force non-interleaving!\n"); + printf("Not enough bank(CS) for CS0+CS1 or " + "CS2+CS3, force non-interleaving!\n"); } break; default: diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn index 5ac39e678..d8fe0a4a1 100644 --- a/doc/README.mpc8641hpcn +++ b/doc/README.mpc8641hpcn @@ -134,15 +134,15 @@ For 36-bit-enabled u-boot, the virtual map is the same as for 32-bit. However, the physical map is altered to reside in 36-bit space, as follows. Addresses are no longer mapped with VA == PA. All accesses from software use the VA; the PA is only used for setting up windows -and mappings. Note that the low 32 bits are the same as the VA above; -only the top 4 bits vary: +and mappings. Note that with the exception of PCI MEM and RIO, the low + 32 bits are the same as the VA above; only the top 4 bits vary: Memory Range Device Size ------------ ------ ---- 0x0_0000_0000 0x0_7fff_ffff DDR 2G - 0xc_8000_0000 0xc_9fff_ffff RIO MEM 512M - 0xc_8000_0000 0xc_9fff_ffff PCI1/PEX1 MEM 512M - 0xc_a000_0000 0xc_bfff_ffff PCI2/PEX2 MEM 512M + 0xc_0000_0000 0xc_1fff_ffff RIO MEM 512M + 0xc_0000_0000 0xc_1fff_ffff PCI1/PEX1 MEM 512M + 0xc_2000_0000 0xc_3fff_ffff PCI2/PEX2 MEM 512M 0xf_ffe0_0000 0xf_ffef_ffff CCSR 1M 0xf_ffdf_0000 0xf_ffdf_7fff PIXIS 8K 0xf_ffdf_8000 0xf_ffdf_ffff CF 8K diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 7625cccec..e57acba0d 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -58,7 +58,7 @@ void pciauto_config_init(struct pci_controller *hose); int fsl_pci_setup_inbound_windows(struct pci_region *r) { struct pci_region *rgn_base = r; - u64 sz = min((u64)gd->ram_size, 1ull << 32); + u64 sz = min((u64)gd->ram_size, (1ull << 32) - 1); phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS; pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS; diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index c67a490f0..856f51a75 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -25,15 +25,22 @@ include $(TOPDIR)/config.mk LIB := $(obj)libusb.a +# core +COBJS-y += usbdcore.o +COBJS-$(CONFIG_USB_OHCI_NEW) += usb_ohci.o + +# host +COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o +COBJS-$(CONFIG_USB_SL811HS) += sl811_usb.o -COBJS-y += isp116x-hcd.o -COBJS-y += sl811_usb.o -COBJS-y += usb_ohci.o -COBJS-y += usbdcore.o +# device +ifdef CONFIG_USB_DEVICE COBJS-y += usbdcore_ep0.o -COBJS-y += usbdcore_mpc8xx.o -COBJS-y += usbdcore_omap1510.o +COBJS-$(CONFIG_OMAP1510) += usbdcore_omap1510.o +COBJS-$(CONFIG_OMAP1610) += usbdcore_omap1510.o +COBJS-$(CONFIG_MPC885_FAMILY) += usbdcore_mpc8xx.o +endif COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/usb/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c index cc46dfe9f..348e404fe 100644 --- a/drivers/usb/isp116x-hcd.c +++ b/drivers/usb/isp116x-hcd.c @@ -56,8 +56,6 @@ */ #include <common.h> - -#ifdef CONFIG_USB_ISP116X_HCD #include <asm/io.h> #include <usb.h> #include <malloc.h> @@ -1441,5 +1439,3 @@ int usb_lowlevel_stop(void) return 0; } - -#endif /* CONFIG_USB_ISP116X_HCD */ diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c index 48f1ee95f..a03e469d1 100644 --- a/drivers/usb/sl811_usb.c +++ b/drivers/usb/sl811_usb.c @@ -36,7 +36,6 @@ */ #include <common.h> -#ifdef CONFIG_USB_SL811HS #include <mpc8xx.h> #include <usb.h> #include "sl811.h" @@ -733,5 +732,3 @@ static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, return status == 0 ? len : status; } - -#endif /* CONFIG_USB_SL811HS */ diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c index e03371c09..d68fdcf06 100644 --- a/drivers/usb/usb_ohci.c +++ b/drivers/usb/usb_ohci.c @@ -46,9 +46,6 @@ */ #include <common.h> - -#ifdef CONFIG_USB_OHCI_NEW - #include <asm/byteorder.h> #if defined(CONFIG_PCI_OHCI) @@ -2016,4 +2013,3 @@ int usb_lowlevel_stop(void) ohci_inited = 0; return 0; } -#endif /* CONFIG_USB_OHCI_NEW */ diff --git a/drivers/usb/usbdcore_ep0.c b/drivers/usb/usbdcore_ep0.c index cf3f3826c..f6e017df1 100644 --- a/drivers/usb/usbdcore_ep0.c +++ b/drivers/usb/usbdcore_ep0.c @@ -51,8 +51,6 @@ */ #include <common.h> - -#if defined(CONFIG_USB_DEVICE) #include "usbdcore.h" #if 0 @@ -597,5 +595,3 @@ int ep0_recv_setup (struct urb *urb) } return -1; } - -#endif diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c index 53bde0dca..0e311ada1 100644 --- a/drivers/usb/usbdcore_mpc8xx.c +++ b/drivers/usb/usbdcore_mpc8xx.c @@ -58,8 +58,6 @@ */ #include <common.h> #include <config.h> - -#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE) #include <commproc.h> #include "usbdcore.h" #include "usbdcore_mpc8xx.h" @@ -1398,5 +1396,3 @@ static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment) return retaddr; } - -#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */ diff --git a/drivers/usb/usbdcore_omap1510.c b/drivers/usb/usbdcore_omap1510.c index 4e3239f58..cb9dc442e 100644 --- a/drivers/usb/usbdcore_omap1510.c +++ b/drivers/usb/usbdcore_omap1510.c @@ -27,9 +27,6 @@ */ #include <common.h> - -#if ((defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)) && defined(CONFIG_USB_DEVICE)) - #include <asm/io.h> #ifdef CONFIG_OMAP_SX1 #include <i2c.h> @@ -1566,4 +1563,3 @@ void udc_unset_nak (int epid) { /* TODO: implement this functionality in omap1510 */ } -#endif diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 2f0bd8c14..06eabc362 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -184,7 +184,7 @@ static void get_name (dir_entry *dirent, char *s_name) if (*s_name == DELETED_FLAG) *s_name = '\0'; else if (*s_name == aRING) - *s_name = 'å'; + *s_name = DELETED_FLAG; downcase (s_name); } @@ -489,7 +489,7 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, l_name[idx] = '\0'; if (*l_name == DELETED_FLAG) *l_name = '\0'; - else if (*l_name == aRING) *l_name = 'å'; + else if (*l_name == aRING) *l_name = DELETED_FLAG; downcase(l_name); /* Return the real directory entry */ diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h index cac7bf6bf..51fc5c13b 100644 --- a/include/asm-ppc/fsl_lbc.h +++ b/include/asm-ppc/fsl_lbc.h @@ -69,6 +69,14 @@ #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) #endif +/* Convert an address into the right format for the BR registers */ +#ifdef CONFIG_PHYS_64BIT +#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \ + ((x & 0x300000000ULL) >> 19))) +#else +#define BR_PHYS_ADDR(x) (x & 0xffff8000) +#endif + /* OR - Option Registers */ #define OR0 0x5004 /* Register offset to immr */ diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index 75b451d20..e5046bef3 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1569,6 +1569,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000 #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 +#define MPC85xx_PORDEVSR_PCI1 0x00800000 #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 #define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 @@ -1647,8 +1648,6 @@ typedef struct ccsr_gur { char res15[61648]; /* 0xe0f30 to 0xefffff */ } ccsr_gur_t; -#define PORDEVSR_PCI (0x00800000) /* PCI Mode */ - #define CONFIG_SYS_MPC85xx_GUTS_OFFSET (0xE0000) #define CONFIG_SYS_MPC85xx_GUTS_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET) #define CONFIG_SYS_MPC85xx_ECM_OFFSET (0x0000) diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index bbdc211c0..8e82aac7b 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -193,7 +193,6 @@ #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ #define CONFIG_SYS_OR1_PRELIM 0xFFFFE8F0 /* length 32K */ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index f633f24bd..14cbc4571 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -266,7 +266,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #undef CONFIG_SYS_RAMBOOT #endif -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index fff888abc..5a99d5fe7 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -99,7 +99,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_DDR_SPD #undef CONFIG_DDR_DLL -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 @@ -231,8 +231,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 79a52d9d1..0b8fe6ad6 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -258,7 +258,6 @@ #define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 46a141a2c..21cf965ab 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -161,7 +161,6 @@ #define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 7ada8a222..eaa737b88 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -281,7 +281,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BR3_PRELIM 0xf8000801 #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index cdbbea60d..b31c2bb37 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -97,7 +97,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 @@ -207,8 +207,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER) -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 083afba9a..7a7e5a145 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -100,7 +100,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_DDR_SPD #define CONFIG_DDR_DLL /* possible DLL fix needed */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ @@ -303,7 +303,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BR3_PRELIM 0xf8000801 #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index f9419ccd0..40b40ed3a 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -279,7 +279,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BR3_PRELIM 0xf8000801 #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index f67d48963..2b5b2c106 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -254,7 +254,6 @@ #define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index ab3e6d694..8bdec65b7 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -92,7 +92,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #define CONFIG_DDR_DLL /* possible DLL fix needed */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -265,7 +265,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BR5_PRELIM 0xf8010801 #define CONFIG_SYS_OR5_PRELIM 0xffff69f7 -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index c3693b856..9a66ca810 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -99,6 +99,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_DDR_SPD #undef CONFIG_DDR_DLL +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 @@ -114,22 +115,22 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x3935d322 -#define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 -#define CONFIG_SYS_DDR_MODE_1 0x00480432 +#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F +#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */ +#define CONFIG_SYS_DDR_TIMING_3 0x00020000 +#define CONFIG_SYS_DDR_TIMING_0 0x00260802 +#define CONFIG_SYS_DDR_TIMING_1 0x626b2634 +#define CONFIG_SYS_DDR_TIMING_2 0x062874cf +#define CONFIG_SYS_DDR_MODE_1 0x00440462 #define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x06180100 +#define CONFIG_SYS_DDR_INTERVAL 0x0c300100 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 +#define CONFIG_SYS_DDR_CLK_CTRL 0x00800000 +#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ -#define CONFIG_SYS_DDR_CONTROL2 0x04400010 +#define CONFIG_SYS_DDR_CONTROL 0xc3000008 /* Type = DDR2 */ +#define CONFIG_SYS_DDR_CONTROL2 0x24400000 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 @@ -248,8 +249,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); | PIXIS_VCFGEN1_TSEC3SER \ | PIXIS_VCFGEN1_TSEC4SER) -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index f2fe4a6cf..27517e5b1 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -81,6 +81,9 @@ #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 + #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) @@ -206,7 +209,6 @@ #undef CONFIG_CLOCKS_IN_MHZ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #ifndef CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ @@ -388,6 +390,17 @@ #define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) +#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATU_BL_1M | BATU_VS | BATU_VP) +#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU +#endif + /* * BAT4 32M Cache-inhibited, guarded * 0xe200_0000 1M PCI-Express 2 I/O diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 69b4c4410..5a832961c 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -186,17 +186,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_BASE_PHYS (CONFIG_SYS_FLASH_BASE \ | CONFIG_SYS_PHYS_ADDR_HIGH) - #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -/* Convert an address into the right format for the BR registers */ -#ifdef CONFIG_PHYS_64BIT -#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \ - ((x & 0x300000000ULL) >> 19))) -#else -#define BR_PHYS_ADDR(x) (x & 0xffff8000) -#endif - #define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ | 0x00001001) /* port size 16bit */ #define CONFIG_SYS_OR0_PRELIM 0xff806ff7 /* 8MB Boot Flash area*/ @@ -268,7 +259,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #undef CONFIG_CLOCKS_IN_MHZ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #ifndef CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index bc2d8253b..4ecf8068e 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -130,7 +130,6 @@ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE #undef CONFIG_SYS_RAMBOOT -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ diff --git a/include/configs/PM854.h b/include/configs/PM854.h index c3a7f816f..1cc80ad21 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -161,7 +161,6 @@ #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/PM856.h b/include/configs/PM856.h index b3bcf23c5..698ad2d91 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -164,7 +164,6 @@ #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 48c933980..2853fba06 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -186,7 +186,6 @@ #define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000) /* the size of CS5 needs to be >= 16M for TLB and LAW setups */ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 2961a1b2a..796030d06 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -171,7 +171,6 @@ extern int tqm834x_num_flash_banks; #undef CONFIG_SYS_RAMBOOT #endif -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 2d4048a92..300f49079 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -234,7 +234,6 @@ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_CCSRBAR \ + 0x04010000) /* Initial RAM address */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 174149b61..0603e3c8a 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -162,7 +162,6 @@ #undef CONFIG_SYS_RAMBOOT #endif -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index aefd30a1e..5ce4dac5e 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -280,7 +280,6 @@ | CONFIG_SYS_LBC_LSDMR_RFEN \ ) -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 43012754d..e1d3a52b5 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -180,7 +180,6 @@ #define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000) /* the size of CS5 needs to be >= 16M for TLB and LAW setups */ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 45d81792e..001294575 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -104,6 +104,9 @@ #define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 + #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) #define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) @@ -241,7 +244,6 @@ #undef CONFIG_CLOCKS_IN_MHZ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #ifndef CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ @@ -433,6 +435,17 @@ #define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) +#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATL_PP_RW | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATU_BL_1M | BATU_VS | BATU_VP) +#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ + | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU +#endif + /* * BAT4 32M Cache-inhibited, guarded * 0xe200_0000 16M PCI-Express 1 I/O diff --git a/include/configs/socrates.h b/include/configs/socrates.h index c67db8f25..e89b5a3fb 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -167,7 +167,6 @@ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End used area in RAM */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 2188e5401..a0f2ed0da 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -151,7 +151,6 @@ #define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 #define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index b0bd0508b..f0990c679 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -164,7 +164,6 @@ #define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 #define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 -#define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ diff --git a/include/fat.h b/include/fat.h index 59de3fbec..c8b949362 100644 --- a/include/fat.h +++ b/include/fat.h @@ -67,7 +67,7 @@ #define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) #define DELETED_FLAG ((char)0xe5) /* Marks deleted files when in name[0] */ -#define aRING 0x05 /* Used to represent 'å' in name[0] */ +#define aRING 0x05 /* Used as special character in name[0] */ /* Indicates that the entry is the last long entry in a set of long * dir entries diff --git a/include/usb.h b/include/usb.h index 9a2e72c9d..84a77b2f8 100644 --- a/include/usb.h +++ b/include/usb.h @@ -43,89 +43,88 @@ /* String descriptor */ struct usb_string_descriptor { - unsigned char bLength; - unsigned char bDescriptorType; - unsigned short wData[1]; + unsigned char bLength; + unsigned char bDescriptorType; + unsigned short wData[1]; } __attribute__ ((packed)); /* device request (setup) */ struct devrequest { - unsigned char requesttype; - unsigned char request; - unsigned short value; - unsigned short index; - unsigned short length; + unsigned char requesttype; + unsigned char request; + unsigned short value; + unsigned short index; + unsigned short length; } __attribute__ ((packed)); - /* All standard descriptors have these 2 fields in common */ struct usb_descriptor_header { - unsigned char bLength; - unsigned char bDescriptorType; + unsigned char bLength; + unsigned char bDescriptorType; } __attribute__ ((packed)); /* Device descriptor */ struct usb_device_descriptor { - unsigned char bLength; - unsigned char bDescriptorType; - unsigned short bcdUSB; - unsigned char bDeviceClass; - unsigned char bDeviceSubClass; - unsigned char bDeviceProtocol; - unsigned char bMaxPacketSize0; - unsigned short idVendor; - unsigned short idProduct; - unsigned short bcdDevice; - unsigned char iManufacturer; - unsigned char iProduct; - unsigned char iSerialNumber; - unsigned char bNumConfigurations; + unsigned char bLength; + unsigned char bDescriptorType; + unsigned short bcdUSB; + unsigned char bDeviceClass; + unsigned char bDeviceSubClass; + unsigned char bDeviceProtocol; + unsigned char bMaxPacketSize0; + unsigned short idVendor; + unsigned short idProduct; + unsigned short bcdDevice; + unsigned char iManufacturer; + unsigned char iProduct; + unsigned char iSerialNumber; + unsigned char bNumConfigurations; } __attribute__ ((packed)); - /* Endpoint descriptor */ struct usb_endpoint_descriptor { - unsigned char bLength; - unsigned char bDescriptorType; - unsigned char bEndpointAddress; - unsigned char bmAttributes; - unsigned short wMaxPacketSize; - unsigned char bInterval; - unsigned char bRefresh; - unsigned char bSynchAddress; - + unsigned char bLength; + unsigned char bDescriptorType; + unsigned char bEndpointAddress; + unsigned char bmAttributes; + unsigned short wMaxPacketSize; + unsigned char bInterval; + unsigned char bRefresh; + unsigned char bSynchAddress; } __attribute__ ((packed)); + /* Interface descriptor */ struct usb_interface_descriptor { - unsigned char bLength; - unsigned char bDescriptorType; - unsigned char bInterfaceNumber; - unsigned char bAlternateSetting; - unsigned char bNumEndpoints; - unsigned char bInterfaceClass; - unsigned char bInterfaceSubClass; - unsigned char bInterfaceProtocol; - unsigned char iInterface; + unsigned char bLength; + unsigned char bDescriptorType; + unsigned char bInterfaceNumber; + unsigned char bAlternateSetting; + unsigned char bNumEndpoints; + unsigned char bInterfaceClass; + unsigned char bInterfaceSubClass; + unsigned char bInterfaceProtocol; + unsigned char iInterface; + + unsigned char no_of_ep; + unsigned char num_altsetting; + unsigned char act_altsetting; - unsigned char no_of_ep; - unsigned char num_altsetting; - unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); /* Configuration descriptor information.. */ struct usb_config_descriptor { - unsigned char bLength; - unsigned char bDescriptorType; - unsigned short wTotalLength; - unsigned char bNumInterfaces; - unsigned char bConfigurationValue; - unsigned char iConfiguration; - unsigned char bmAttributes; - unsigned char MaxPower; + unsigned char bLength; + unsigned char bDescriptorType; + unsigned short wTotalLength; + unsigned char bNumInterfaces; + unsigned char bConfigurationValue; + unsigned char iConfiguration; + unsigned char bmAttributes; + unsigned char MaxPower; - unsigned char no_of_if; /* number of interfaces */ + unsigned char no_of_if; /* number of interfaces */ struct usb_interface_descriptor if_desc[USB_MAXINTERFACES]; } __attribute__ ((packed)); @@ -138,19 +137,20 @@ enum { }; struct usb_device { - int devnum; /* Device number on USB bus */ - int slow; /* Slow device? */ - char mf[32]; /* manufacturer */ - char prod[32]; /* product */ - char serial[32]; /* serial number */ + int devnum; /* Device number on USB bus */ + int slow; /* Slow device? */ + char mf[32]; /* manufacturer */ + char prod[32]; /* product */ + char serial[32]; /* serial number */ /* Maximum packet size; one of: PACKET_SIZE_* */ int maxpacketsize; /* one bit for each endpoint ([0] = IN, [1] = OUT) */ unsigned int toggle[2]; - /* endpoint halts; one bit per endpoint # & direction; */ + /* endpoint halts; one bit per endpoint # & direction; + * [0] = IN, [1] = OUT + */ unsigned int halted[2]; - /* [0] = IN, [1] = OUT */ int epmaxpacketin[16]; /* INput endpoint specific maximums */ int epmaxpacketout[16]; /* OUTput endpoint specific maximums */ @@ -180,21 +180,22 @@ struct usb_device { */ #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \ - defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \ + defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_SL811HS) || \ defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_R8A66597_HCD) int usb_lowlevel_init(void); int usb_lowlevel_stop(void); -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len); +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len); int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len,struct devrequest *setup); + int transfer_len, struct devrequest *setup); int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); void usb_event_poll(void); /* Defines */ -#define USB_UHCI_VEND_ID 0x8086 -#define USB_UHCI_DEV_ID 0x7112 +#define USB_UHCI_VEND_ID 0x8086 +#define USB_UHCI_DEV_ID 0x7112 #else #error USB Lowlevel not defined @@ -221,8 +222,9 @@ int usb_stop(void); /* stop the USB Controller */ int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol); -int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id); -struct usb_device * usb_get_dev_index(int index); +int usb_set_idle(struct usb_device *dev, int ifnum, int duration, + int report_id); +struct usb_device *usb_get_dev_index(int index); int usb_control_msg(struct usb_device *dev, unsigned int pipe, unsigned char request, unsigned char requesttype, unsigned short value, unsigned short index, @@ -230,14 +232,17 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout); int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, - void *buffer,int transfer_len, int interval); + void *buffer, int transfer_len, int interval); void usb_disable_asynch(int disable); -int usb_maxpacket(struct usb_device *dev,unsigned long pipe); -void __inline__ wait_ms(unsigned long ms); -int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cfgno); -int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size); +int usb_maxpacket(struct usb_device *dev, unsigned long pipe); +inline void wait_ms(unsigned long ms); +int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer, + int cfgno); +int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, + unsigned char id, void *buf, int size); int usb_get_class_descriptor(struct usb_device *dev, int ifnum, - unsigned char type, unsigned char id, void *buf, int size); + unsigned char type, unsigned char id, void *buf, + int size); int usb_clear_halt(struct usb_device *dev, int pipe); int usb_string(struct usb_device *dev, int index, char *buf, size_t size); int usb_set_interface(struct usb_device *dev, int interface, int alternate); @@ -247,7 +252,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); #define __swap_16(x) \ ({ unsigned short x_ = (unsigned short)x; \ (unsigned short)( \ - ((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \ + ((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8)); \ }) #define __swap_32(x) \ ({ unsigned long x_ = (unsigned long)x; \ @@ -255,7 +260,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); ((x_ & 0x000000FFUL) << 24) | \ ((x_ & 0x0000FF00UL) << 8) | \ ((x_ & 0x00FF0000UL) >> 8) | \ - ((x_ & 0xFF000000UL) >> 24) ); \ + ((x_ & 0xFF000000UL) >> 24)); \ }) #ifdef LITTLEENDIAN @@ -286,12 +291,14 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); * unsigned int. The encoding is: * * - max size: bits 0-1 (00 = 8, 01 = 16, 10 = 32, 11 = 64) - * - direction: bit 7 (0 = Host-to-Device [Out], 1 = Device-to-Host [In]) + * - direction: bit 7 (0 = Host-to-Device [Out], + * (1 = Device-to-Host [In]) * - device: bits 8-14 * - endpoint: bits 15-18 * - Data0/1: bit 19 * - speed: bit 26 (0 = Full, 1 = Low Speed) - * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt, 10 = control, 11 = bulk) + * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt, + * 10 = control, 11 = bulk) * * Why? Because it's arbitrary, and whatever encoding we select is really * up to us. This one happens to share a lot of bit positions with the UHCI @@ -300,24 +307,42 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); */ /* Create various pipes... */ #define create_pipe(dev,endpoint) \ - (((dev)->devnum << 8) | (endpoint << 15) | ((dev)->slow << 26) | (dev)->maxpacketsize) -#define default_pipe(dev) ((dev)->slow <<26) + (((dev)->devnum << 8) | (endpoint << 15) | \ + ((dev)->slow << 26) | (dev)->maxpacketsize) +#define default_pipe(dev) ((dev)->slow << 26) -#define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | create_pipe(dev,endpoint)) -#define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | create_pipe(dev,endpoint)) -#define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | create_pipe(dev,endpoint)) -#define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | create_pipe(dev,endpoint)) -#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | default_pipe(dev)) -#define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | default_pipe(dev) | USB_DIR_IN) +#define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \ + create_pipe(dev, endpoint)) +#define usb_rcvctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \ + create_pipe(dev, endpoint) | \ + USB_DIR_IN) +#define usb_sndisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \ + create_pipe(dev, endpoint)) +#define usb_rcvisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \ + create_pipe(dev, endpoint) | \ + USB_DIR_IN) +#define usb_sndbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \ + create_pipe(dev, endpoint)) +#define usb_rcvbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \ + create_pipe(dev, endpoint) | \ + USB_DIR_IN) +#define usb_sndintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \ + create_pipe(dev, endpoint)) +#define usb_rcvintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \ + create_pipe(dev, endpoint) | \ + USB_DIR_IN) +#define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | \ + default_pipe(dev)) +#define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | \ + default_pipe(dev) | \ + USB_DIR_IN) /* The D0/D1 toggle bits */ #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1) #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep)) -#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << ep)) | ((bit) << ep)) +#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = \ + ((dev)->toggle[out] & \ + ~(1 << ep)) | ((bit) << ep)) /* Endpoint halt control/status */ #define usb_endpoint_out(ep_dir) (((ep_dir >> 7) & 1) ^ 1) @@ -325,7 +350,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); #define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep))) #define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep))) -#define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : USB_PID_OUT) +#define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : \ + USB_PID_OUT) #define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1) #define usb_pipein(pipe) (((pipe) >> 7) & 1) @@ -365,7 +391,7 @@ struct usb_hub_descriptor { unsigned char bHubContrCurrent; unsigned char DeviceRemovable[(USB_MAXCHILDREN+1+7)/8]; unsigned char PortPowerCtrlMask[(USB_MAXCHILDREN+1+7)/8]; - /* DeviceRemovable and PortPwrCtrlMask want to be variable-length + /* DeviceRemovable and PortPwrCtrlMask want to be variable-length bitmaps that hold max 255 entries. (bit0 is ignored) */ } __attribute__ ((packed)); |