summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL32
-rw-r--r--Makefile3
-rw-r--r--board/amcc/acadia/Makefile47
-rw-r--r--board/amcc/acadia/acadia.c152
-rw-r--r--board/amcc/acadia/config.mk41
-rw-r--r--board/amcc/acadia/cpr.c195
-rw-r--r--board/amcc/acadia/flash.c1108
-rw-r--r--board/amcc/acadia/memory.c564
-rw-r--r--board/amcc/acadia/u-boot.lds150
-rwxr-xr-xinclude/configs/acadia.h424
11 files changed, 2701 insertions, 16 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 1d0a8dfdb..61d9271f7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -284,6 +284,7 @@ Stefan Roese <sr@denx.de>
TQM85xx MPC8540/8541/8555/8560
+ acadia PPC405EZ
alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
diff --git a/MAKEALL b/MAKEALL
index 8431b3ea5..1c8e5ba15 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -75,22 +75,22 @@ LIST_8xx=" \
#########################################################################
LIST_4xx=" \
- ADCIOP alpr AP1000 AR405 \
- ASH405 bamboo bubinga CANBT \
- CMS700 CPCI2DP CPCI405 CPCI4052 \
- CPCI405AB CPCI405DT CPCI440 CPCIISER4 \
- CRAYL1 csb272 csb472 DASA_SIM \
- DP405 DU405 ebony ERIC \
- EXBITGEN G2000 HH405 HUB405 \
- JSE KAREF katmai luan \
- METROBOX MIP405 MIP405T ML2 \
- ml300 ocotea OCRTC ORSG \
- p3p440 PCI405 pcs440ep PIP405 \
- PLU405 PMC405 PPChameleonEVB sbc405 \
- sc3 sequoia sequoia_nand taishan \
- VOH405 VOM405 W7OLMC W7OLMG \
- walnut WUH405 XPEDITE1K yellowstone \
- yosemite yucca \
+ acadia ADCIOP alpr AP1000 \
+ AR405 ASH405 bamboo bubinga \
+ CANBT CMS700 CPCI2DP CPCI405 \
+ CPCI4052 CPCI405AB CPCI405DT CPCI440 \
+ CPCIISER4 CRAYL1 csb272 csb472 \
+ DASA_SIM DP405 DU405 ebony \
+ ERIC EXBITGEN G2000 HH405 \
+ HUB405 JSE KAREF katmai \
+ luan METROBOX MIP405 MIP405T \
+ ML2 ml300 ocotea OCRTC \
+ ORSG p3p440 PCI405 pcs440ep \
+ PIP405 PLU405 PMC405 PPChameleonEVB \
+ sbc405 sc3 sequoia sequoia_nand \
+ taishan VOH405 VOM405 W7OLMC \
+ W7OLMG walnut WUH405 XPEDITE1K \
+ yellowstone yosemite yucca \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 358d1817c..65e7f5b1d 100644
--- a/Makefile
+++ b/Makefile
@@ -994,6 +994,9 @@ wtk_config: unconfig
#########################################################################
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
+acadia_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
+
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
new file mode 100644
index 000000000..183f694c7
--- /dev/null
+++ b/board/amcc/acadia/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o cpr.o memory.o
+SOBJS =
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
new file mode 100644
index 000000000..c8aaad2d7
--- /dev/null
+++ b/board/amcc/acadia/acadia.c
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+extern void board_pll_init_f(void);
+
+/* Some specific Acadia Defines */
+#define CPLD_BASE 0x80000000
+
+void liveoak_gpio_init(void)
+{
+ /*
+ * GPIO0 setup (select GPIO or alternate function)
+ */
+ out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
+ out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
+ out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
+ out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+ out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
+
+ /*
+ * Ultra (405EZ) was nice enough to add another GPIO controller
+ */
+ out32(GPIO1_OSRH, CFG_GPIO1_OSRH); /* output select */
+ out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
+ out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H); /* input select */
+ out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
+ out32(GPIO1_TSRH, CFG_GPIO1_TSRH); /* three-state select */
+ out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
+ out32(GPIO1_TCR, CFG_GPIO1_TCR); /* enable output driver for outputs */
+}
+
+#if 0 /* test-only: not called at all??? */
+void ext_bus_cntlr_init(void)
+{
+#if (defined(EBC_PB4AP) && defined(EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
+ mtebc(pb4ap, EBC_PB4AP);
+ mtebc(pb4cr, EBC_PB4CR);
+#endif
+}
+#endif
+
+int board_early_init_f(void)
+{
+ unsigned int reg;
+
+#if 0 /* test-only */
+ /*
+ * If CRAM memory and SPI/NAND boot, and if the CRAM memory is
+ * already initialized by the pre-loader then we can't reinitialize
+ * CPR registers, GPIO registers and EBC registers as this will
+ * have the effect of un-initializing CRAM.
+ */
+ spr_reg = (volatile unsigned long) mfspr(SPRG7);
+ if (spr_reg != LOAK_CRAM) { /* != CRAM */
+ board_pll_init_f();
+ liveoak_gpio_init();
+ ext_bus_cntlr_init();
+
+ mtebc(pb1ap, CFG_EBC_PB1AP);
+ mtebc(pb1cr, CFG_EBC_PB1CR);
+
+ mtebc(pb2ap, CFG_EBC_PB2AP);
+ mtebc(pb2cr, CFG_EBC_PB2CR);
+ }
+#else
+ board_pll_init_f();
+ liveoak_gpio_init();
+/* ext_bus_cntlr_init(); */
+#endif
+
+#if 0 /* test-only (orig) */
+ /*
+ * If we boot from NAND Flash, we are running in
+ * RAM, so disable the EBC_CS0 so that it goes back
+ * to the NOR Flash. It will be enabled later
+ * for the NAND Flash on EBC_CS1
+ */
+ mfsdr(sdrultra0, reg);
+ mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
+#endif
+#if 0 /* test-only */
+ /* configure for NAND */
+ mfsdr(sdrultra0, reg);
+ reg &= ~SDR_ULTRA0_CSN_MASK;
+ reg |= SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS;
+ mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
+#endif
+
+ /* USB Host core needs this bit set */
+ mfsdr(sdrultra1, reg);
+ mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
+
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000010);
+ mtdcr(uicpr, 0xFE7FFFF0); /* set int polarities */
+ mtdcr(uictr, 0x00000010); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ return 0;
+}
+
+int misc_init_f(void)
+{
+ /* Set EPLD to take PHY out of reset */
+ out8(CPLD_BASE + 0x05, 0x00);
+ udelay(100000);
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ printf("Board: Acadia - AMCC PPC405EZ Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
new file mode 100644
index 000000000..79b948e46
--- /dev/null
+++ b/board/amcc/acadia/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(TOPDIR)/board/amcc/liveoak/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFC0000
+endif
+
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+endif
+
+ifeq ($(CONFIG_SPI_U_BOOT),y)
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-spi.lds
+PAD_TO = 0x00840000
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/cpr.c
new file mode 100644
index 000000000..10d8290e6
--- /dev/null
+++ b/board/amcc/acadia/cpr.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc405.h>
+
+/* test-only: move into cpu directory!!! */
+
+#if defined(PLLMR0_200_133_66)
+void board_pll_init_f(void)
+{
+ /*
+ * set PLL clocks based on input sysclk is 33M
+ *
+ * ----------------------------------
+ * | CLK | FREQ (MHz) | DIV RATIO |
+ * ----------------------------------
+ * | CPU | 200.0 | 4 (0x02)|
+ * | PLB | 133.3 | 6 (0x06)|
+ * | OPB | 66.6 | 12 (0x0C)|
+ * | EBC | 66.6 | 12 (0x0C)|
+ * | SPI | 66.6 | 12 (0x0C)|
+ * | UART0 | 10.0 | 40 (0x28)|
+ * | UART1 | 10.0 | 40 (0x28)|
+ * | DAC | 2.0 | 200 (0xC8)|
+ * | ADC | 2.0 | 200 (0xC8)|
+ * | PWM | 100.0 | 4 (0x04)|
+ * | EMAC | 25.0 | 16 (0x10)|
+ * -----------------------------------
+ */
+
+ /* Initialize PLL */
+ mtcpr(cprpllc, 0x0000033c);
+ mtcpr(cprplld, 0x0c010200);
+ mtcpr(cprprimad, 0x04060c0c);
+ mtcpr(cprperd0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */
+ mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_266_160_80)
+
+void board_pll_init_f(void)
+{
+ /*
+ * set PLL clocks based on input sysclk is 33M
+ *
+ * ----------------------------------
+ * | CLK | FREQ (MHz) | DIV RATIO |
+ * ----------------------------------
+ * | CPU | 266.64 | 3 |
+ * | PLB | 159.98 | 5 (0x05)|
+ * | OPB | 79.99 | 10 (0x0A)|
+ * | EBC | 79.99 | 10 (0x0A)|
+ * | SPI | 79.99 | 10 (0x0A)|
+ * | UART0 | 28.57 | 7 (0x07)|
+ * | UART1 | 28.57 | 7 (0x07)|
+ * | DAC | 28.57 | 7 (0xA7)|
+ * | ADC | 4 | 50 (0x32)|
+ * | PWM | 28.57 | 7 (0x07)|
+ * | EMAC | 4 | 50 (0x32)|
+ * -----------------------------------
+ */
+
+ /* Initialize PLL */
+ mtcpr(cprpllc, 0x20000238);
+ mtcpr(cprplld, 0x03010400);
+ mtcpr(cprprimad, 0x03050a0a);
+ mtcpr(cprperc0, 0x00000000);
+ mtcpr(cprperd0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */
+ mtcpr(cprperd1, 0x07323200);
+ mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_333_166_83)
+
+void board_pll_init_f(void)
+{
+ /*
+ * set PLL clocks based on input sysclk is 33M
+ *
+ * ----------------------------------
+ * | CLK | FREQ (MHz) | DIV RATIO |
+ * ----------------------------------
+ * | CPU | 333.33 | 2 |
+ * | PLB | 166.66 | 4 (0x04)|
+ * | OPB | 83.33 | 8 (0x08)|
+ * | EBC | 83.33 | 8 (0x08)|
+ * | SPI | 83.33 | 8 (0x08)|
+ * | UART0 | 16.66 | 5 (0x05)|
+ * | UART1 | 16.66 | 5 (0x05)|
+ * | DAC | ???? | 166 (0xA6)|
+ * | ADC | ???? | 166 (0xA6)|
+ * | PWM | 41.66 | 3 (0x03)|
+ * | EMAC | ???? | 3 (0x03)|
+ * -----------------------------------
+ */
+
+ /* Initialize PLL */
+ mtcpr(cprpllc, 0x0000033C);
+ mtcpr(cprplld, 0x0a010000);
+ mtcpr(cprprimad, 0x02040808);
+ mtcpr(cprperd0, 0x02080505); /* SPI clk div. eq. OPB clk div. */
+ mtcpr(cprperd1, 0xA6A60300);
+ mtcpr(cprclkupd, 0x40000000);
+}
+
+#elif defined(PLLMR0_100_100_12)
+
+void board_pll_init_f(void)
+{
+ /*
+ * set PLL clocks based on input sysclk is 33M
+ *
+ * ----------------------
+ * | CLK | FREQ (MHz) |
+ * ----------------------
+ * | CPU | 100.00 |
+ * | PLB | 100.00 |
+ * | OPB | 12.00 |
+ * | EBC | 49.00 |
+ * ----------------------
+ */
+
+ /* Initialize PLL */
+ mtcpr(cprpllc, 0x000003BC);
+ mtcpr(cprplld, 0x06060600);
+ mtcpr(cprprimad, 0x02020004);
+ mtcpr(cprperd0, 0x04002828); /* SPI clk div. eq. OPB clk div. */
+ mtcpr(cprperd1, 0xC8C81600);
+ mtcpr(cprclkupd, 0x40000000);
+}
+#endif /* CPU_<speed>_405EZ */
+
+#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL)
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+ unsigned long cpr_plld;
+ unsigned long cpr_primad;
+ unsigned long primad_cpudv;
+ unsigned long pllFbkDiv;
+ unsigned long freqProcessor;
+
+ /*
+ * Read PLL Mode registers
+ */
+ mfcpr(cprplld, cpr_plld);
+
+ /*
+ * Read CPR_PRIMAD register
+ */
+ mfcpr(cprprimad, cpr_primad);
+
+ /*
+ * Determine CPU clock frequency
+ */
+ primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+ if (primad_cpudv == 0)
+ primad_cpudv = 16;
+
+ /*
+ * Determine FBK_DIV.
+ */
+ pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+ if (pllFbkDiv == 0)
+ pllFbkDiv = 256;
+
+ freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv;
+
+ return (freqProcessor);
+}
+#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */
diff --git a/board/amcc/acadia/flash.c b/board/amcc/acadia/flash.c
new file mode 100644
index 000000000..39a11f938
--- /dev/null
+++ b/board/amcc/acadia/flash.c
@@ -0,0 +1,1108 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*
+ * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
+ */
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+ {0xffc00001}, /* 0:boot from big flash */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word_1(flash_info_t * info, ulong dest, ulong data);
+static int write_word_2(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
+#endif
+
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_STM:
+ printf("STM ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ case FLASH_MAN_SST:
+ printf("SST ");
+ break;
+ case FLASH_MAN_MX:
+ printf("MIXC ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ printf("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B:
+ printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM160B:
+ printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM033C:
+ printf("AM29LV033C (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A:
+ printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A:
+ printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_STMW320DT:
+ printf ("M29W320DT (32 M, top sector)\n");
+ break;
+ case FLASH_MXLV320T:
+ printf ("MXLV320T (32 Mbit, top sector)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ", info->protect[i] ? "RO " : " ");
+ }
+ printf("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ /* bit 0 used for big flash marking */
+ if ((ulong)addr & 0x1) {
+ return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
+ } else {
+ return flash_get_size_1(addr, info);
+ }
+}
+
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ info->flash_id += FLASH_AMDLV033C;
+ info->sector_count = 64;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+static int wait_for_DQ7_1(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+ return flash_erase_2(info, s_first, s_last);
+ } else {
+ return flash_erase_1(info, s_first, s_last);
+ }
+}
+
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_1(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+ if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+ return write_word_2(info, dest, data);
+ } else {
+ return write_word_1(info, dest, data);
+ }
+}
+
+static int write_word_1(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+
+#undef CFG_FLASH_WORD_SIZE
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ int n;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+#if 0 /* TODO: remove ifdef when Flash responds correctly */
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+ info->flash_id = FLASH_MAN_MX;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+#endif /* TODO: remove ifdef when Flash responds correctly */
+
+ /*
+ * TODO: Start
+ * uncomment block above when Flash responds correctly.
+ * also remove the lines below:
+ */
+ info->flash_id = FLASH_MAN_AMD;
+ DEBUGF("FLASH MANUFACT: FLASH_MAN_AMD\n");
+ /* TODO: End */
+
+ value = addr2[1]; /* device ID */
+
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+#if 0 /* TODO: remove ifdef when Flash responds correctly */
+ switch (value) {
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+ info->flash_id += FLASH_STMW320DT;
+ info->sector_count = 67;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+ info->flash_id += FLASH_MXLV320T;
+ info->sector_count = 71;
+ info->size = 0x00400000; break; /* => 4 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+#endif /* TODO: remove ifdef when Flash responds correctly */
+
+ /*
+ * TODO: Start
+ * uncomment block above when Flash responds correctly.
+ * also remove the lines below:
+ */
+ DEBUGF("\nFLASH DEVICEID: FLASH_AM320T\n");
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 71;
+ info->size = 0x00400000; /* => 4 MB */
+ /* TODO: End */
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+ /* set sector offsets for top boot block type */
+ base += info->size;
+ i = info->sector_count;
+ /* 1 x 16k boot sector */
+ base -= 16 << 10;
+ --i;
+ info->start[i] = base;
+ /* 2 x 8k boot sectors */
+ for (n=0; n<2; ++n) {
+ base -= 8 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ /* 1 x 32k boot sector */
+ base -= 32 << 10;
+ --i;
+ info->start[i] = base;
+
+ while (i > 0) { /* 64k regular sectors */
+ base -= 64 << 10;
+ --i;
+ info->start[i] = base;
+ }
+ } else if ( ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ) {
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00002000;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ info->start[i--] = base + info->size - 0x0000a000;
+ info->start[i--] = base + info->size - 0x0000c000;
+ info->start[i--] = base + info->size - 0x0000e000;
+ info->start[i--] = base + info->size - 0x00010000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ else {
+ if (info->flash_id & FLASH_BTYPE){
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address,(A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+/*
+ * TODO: FIX: this wait loop sometimes fails: DQ7 indicates the erase command
+ * never was accepted (i.e. didn't start) - why????
+ */
+static int wait_for_DQ7_2(flash_info_t * info, int sect)
+{
+ ulong start, now, last, counter = 0;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ DEBUGF("DQ7_2: start = 0x%08lx\n", start);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now);
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ udelay(1000000); /* 1 sec */
+ putc('.');
+ counter++;
+ if (counter > 5) {
+ return -1;
+ }
+ DEBUGF("DQ7_2: now = 0x%08lx, last = 0x%08lx\n", now, last);
+ }
+ return 0;
+}
+
+static void wr_flash_cmd(ulong sector, ushort addr, CFG_FLASH_WORD_SIZE value)
+{
+ int fw_size;
+
+ fw_size = sizeof(value);
+ switch (fw_size)
+ {
+ case 1:
+ out8((ulong)(sector + addr), value);
+ break;
+ case 2:
+ out16((ulong)(sector + (addr << 1)), value);
+ break;
+ default:
+ printf("flash_erase: error incorrect chip programing size.\n");
+ }
+ return;
+}
+
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect, count = 0;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first, count = 0; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ /*
+ * TODO: fix code
+ */
+ wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0);
+ wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA);
+ wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055);
+ wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00800080);
+ wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA);
+ wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055);
+ wr_flash_cmd((ulong)addr2, 0, (CFG_FLASH_WORD_SIZE) 0x00300030);
+ udelay(2000000); /* 2 sec */
+ wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0);
+
+#if 0
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+#endif
+ }
+ l_sect = sect;
+ printf("..");
+ printf("..");
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7_2(info, sect);
+ count++;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+
+ if (count > 0) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+static int write_word_2(flash_info_t * info, ulong dest, ulong data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
+#endif /* CFG_FLASH_2ND_16BIT_DEV */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned short index = 0;
+ int i;
+
+ index = 0;
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
+ &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH) && defined(CFG_ENV_ADDR_REDUND)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#endif
+#endif
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
new file mode 100644
index 000000000..0f1de71c1
--- /dev/null
+++ b/board/amcc/acadia/memory.c
@@ -0,0 +1,564 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#define CRAM_BANK0_BASE 0x0
+#define CRAM_DIDR 0x00100000
+#define MICRON_MT45W8MW16BGX_CRAM_ID 0x1b431b43
+#define MICRON_MT45W8MW16BGX_CRAM_ID2 0x13431343
+#define MICRON_DIDR_VENDOR_ID 0x00030003 /* 00011b */
+#define CRAM_DIDR_VENDOR_ID_MASK 0x001f001f /* DIDR[4:0] */
+#define CRAM_DEVID_NOT_SUPPORTED 0x00000000
+
+#define PSRAM_PASS 0x50415353 /* "PASS" */
+#define PSRAM_FAIL 0x4641494C /* "FAIL" */
+
+static u32 is_cram_inited(void);
+static u32 is_cram(void);
+static long int cram_init(u32);
+static void cram_bcr_write(u32);
+void udelay (unsigned long);
+
+void sdram_init(void)
+{
+ volatile unsigned long spr_reg;
+
+ /*
+ * If CRAM not initialized or CRAM looks initialized because this
+ * is after a warm reboot then set SPRG7 to indicate CRAM needs
+ * initialization. Note that CRAM is initialized by the SPI and
+ * NAND preloader.
+ */
+ spr_reg = (volatile unsigned long) mfspr(SPRG6);
+ if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) {
+ mtspr(SPRG7, LOAK_NONE); /* "NONE" */
+ }
+
+#if 1
+ /*
+ * When running the NAND SPL, the normal EBC configuration is not
+ * done, so We need to enable EPLD access on EBC_CS_2 and the memory
+ * on EBC_CS_3
+ */
+
+ /* Enable CPLD - Needed for PSRAM Access */
+
+
+ /* Init SDRAM by setting EBC Bank 3 for PSRAM */
+ mtebc(pb1ap, CFG_EBC_PB1AP);
+ mtebc(pb1cr, CFG_EBC_PB1CR);
+
+ mtebc(pb2ap, CFG_EBC_PB2AP);
+ mtebc(pb2cr, CFG_EBC_PB2CR);
+
+ /* pre-boot loader code: we are in OCM */
+ mtspr(SPRG6, LOAK_SPL); /* "SPL " */
+ mtspr(SPRG7, LOAK_OCM); /* "OCM " */
+#endif
+
+ return;
+}
+
+static void cram_bcr_write(u32 wr_val)
+{
+ u32 tmp_reg;
+ u32 val;
+ volatile u32 gpio_reg;
+
+ /* # Program CRAM write */
+
+ /*
+ * set CRAM_CRE = 0x1
+ * set wr_val = wr_val << 2
+ */
+ gpio_reg = in32(GPIO1_OR);
+ out32(GPIO1_OR, gpio_reg | 0x00000400);
+ wr_val = wr_val << 2;
+ /* wr_val = 0x1c048; */
+
+
+ /*
+ * # stop PLL clock before programming CRAM
+ * set EPLD0_MUX_CTL.OESPR3 = 1
+ * delay 2
+ */
+
+
+ /*
+ * # CS1
+ * read 0x00200000
+ * #shift 2 bit left before write
+ * set val = wr_val + 0x00200000
+ * write dmem val 0
+ * read 0x00200000 val
+ * print val/8x
+ */
+ tmp_reg = in32(0x00200000);
+ val = wr_val + 0x00200000;
+ /* val = 0x0021c048; */
+ out32(val, 0x0000);
+ udelay(100000);
+ val = in32(0x00200000);
+
+ debug("CRAM VAL: %x for CS1 ", val);
+
+ /*
+ * # CS2
+ * read 0x02200000
+ * #shift 2 bit left before write
+ * set val = wr_val + 0x02200000
+ * write dmem val 0
+ * read 0x02200000 val
+ * print val/8x
+ */
+ tmp_reg = in32(0x02200000);
+ val = wr_val + 0x02200000;
+ /* val = 0x0221c048; */
+ out32(val, 0x0000);
+ udelay(100000);
+ val = in32(0x02200000);
+
+ debug("CRAM VAL: %x for CS2 ", val);
+
+ /*
+ * # Start PLL clock before programming CRAM
+ * set EPLD0_MUX_CTL.OESPR3 = 0
+ */
+
+
+ /*
+ * set CRAMCR = 0x1
+ */
+ gpio_reg = in32(GPIO1_OR);
+ out32(GPIO1_OR, gpio_reg | 0x00000400);
+
+ /*
+ * # read CRAM config BCR ( bit19:18 = 10b )
+ * #read 0x00200000
+ * # 1001_1001_0001_1111 ( 991f ) =>
+ * #10_0110_0100_0111_1100 => 2647c => 0022647c
+ * #0011_0010_0011_1110 (323e)
+ * #
+ */
+
+ /*
+ * set EPLD0_MUX_CTL.CRAMCR = 0x0
+ */
+ gpio_reg = in32(GPIO1_OR);
+ out32(GPIO1_OR, gpio_reg & 0xFFFFFBFF);
+ return;
+}
+
+static u32 is_cram_inited()
+{
+ volatile unsigned long spr_reg;
+
+ /*
+ * If CRAM is initialized already, then don't reinitialize it again.
+ * In the case of NAND boot and SPI boot, CRAM will already be
+ * initialized by the pre-loader
+ */
+ spr_reg = (volatile unsigned long) mfspr(SPRG7);
+ if (spr_reg == LOAK_CRAM) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/******
+ * return 0 if not CRAM
+ * return 1 if CRAM and it's already inited by preloader
+ * else return cram_id (CRAM Device Identification Register)
+ ******/
+static u32 is_cram(void)
+{
+ u32 gpio_TCR, gpio_OSRL, gpio_OR, gpio_ISR1L;
+ volatile u32 gpio_reg;
+ volatile u32 cram_id = 0;
+
+ if (is_cram_inited() == 1) {
+ /* this is CRAM and it is already inited (by preloader) */
+ cram_id = 1;
+ } else {
+ /*
+ * # CRAM CLOCK
+ * set GPIO0_TCR.G8 = 1
+ * set GPIO0_OSRL.G8 = 0
+ * set GPIO0_OR.G8 = 0
+ */
+ gpio_reg = in32(GPIO0_TCR);
+ gpio_TCR = gpio_reg;
+ out32(GPIO0_TCR, gpio_reg | 0x00800000);
+ gpio_reg = in32(GPIO0_OSRL);
+ gpio_OSRL = gpio_reg;
+ out32(GPIO0_OSRL, gpio_reg & 0xffffbfff);
+ gpio_reg = in32(GPIO0_OR);
+ gpio_OR = gpio_reg;
+ out32(GPIO0_OR, gpio_reg & 0xff7fffff);
+
+ /*
+ * # CRAM Addreaa Valid
+ * set GPIO0_TCR.G10 = 1
+ * set GPIO0_OSRL.G10 = 0
+ * set GPIO0_OR.G10 = 0
+ */
+ gpio_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, gpio_reg | 0x00200000);
+ gpio_reg = in32(GPIO0_OSRL);
+ out32(GPIO0_OSRL, gpio_reg & 0xfffffbff);
+ gpio_reg = in32(GPIO0_OR);
+ out32(GPIO0_OR, gpio_reg & 0xffdfffff);
+
+ /*
+ * # config input (EBC_WAIT)
+ * set GPIO0_ISR1L.G9 = 1
+ * set GPIO0_TCR.G9 = 0
+ */
+ gpio_reg = in32(GPIO0_ISR1L);
+ gpio_ISR1L = gpio_reg;
+ out32(GPIO0_ISR1L, gpio_reg | 0x00001000);
+ gpio_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, gpio_reg & 0xffbfffff);
+
+ /*
+ * Enable CRE to read Registers
+ * set GPIO0_TCR.21 = 1
+ * set GPIO1_OR.21 = 1
+ */
+ gpio_reg = in32(GPIO1_TCR);
+ out32(GPIO1_TCR, gpio_reg | 0x00000400);
+
+ gpio_reg = in32(GPIO1_OR);
+ out32(GPIO1_OR, gpio_reg | 0x00000400);
+
+
+
+
+ /* Read Version ID */
+ cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR);
+ udelay(100000);
+
+ asm volatile(" sync");
+ asm volatile(" eieio");
+
+ debug("Cram ID: %X ", cram_id);
+
+ switch (cram_id) {
+ case MICRON_MT45W8MW16BGX_CRAM_ID:
+ case MICRON_MT45W8MW16BGX_CRAM_ID2:
+ /* supported CRAM vendor/part */
+ break;
+ case CRAM_DEVID_NOT_SUPPORTED:
+ default:
+ /* check for DIDR Vendor ID of Micron */
+ if ((cram_id & CRAM_DIDR_VENDOR_ID_MASK) ==
+ MICRON_DIDR_VENDOR_ID)
+ {
+ /* supported CRAM vendor */
+ break;
+ }
+ /* this is not CRAM or not supported CRAM vendor/part */
+ cram_id = 0;
+ /*
+ * reset the GPIO registers to the values that were
+ * there before this routine
+ */
+ out32(GPIO0_TCR, gpio_TCR);
+ out32(GPIO0_OSRL, gpio_OSRL);
+ out32(GPIO0_OR, gpio_OR);
+ out32(GPIO0_ISR1L, gpio_ISR1L);
+ break;
+ }
+ }
+
+ return cram_id;
+}
+
+static long int cram_init(u32 already_inited)
+{
+ volatile u32 tmp_reg;
+ u32 cram_wr_val;
+
+ if (already_inited == 0) return 0;
+
+ /*
+ * If CRAM is initialized already, then don't reinitialize it again.
+ * In the case of NAND boot and SPI boot, CRAM will already be
+ * initialized by the pre-loader
+ */
+ if (already_inited != 1)
+ {
+ /*
+ * #o CRAM Card
+ * # - CRAMCRE @reg16 = 1; for CRAM to use
+ * # - CRAMCRE @reg16 = 0; for CRAM to program
+ *
+ * # enable CRAM SEL, move from setEPLD.cmd
+ * set EPLD0_MUX_CTL.OECRAM = 0
+ * set EPLD0_MUX_CTL.CRAMCR = 1
+ * set EPLD0_ETHRSTBOOT.SLCRAM = 0
+ * #end
+ */
+
+
+ /*
+ * #1. EBC need to program READY, CLK, ADV for ASync mode
+ * # config output
+ */
+
+ /*
+ * # CRAM CLOCK
+ * set GPIO0_TCR.G8 = 1
+ * set GPIO0_OSRL.G8 = 0
+ * set GPIO0_OR.G8 = 0
+ */
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg | 0x00800000);
+ tmp_reg = in32(GPIO0_OSRL);
+ out32(GPIO0_OSRL, tmp_reg & 0xffffbfff);
+ tmp_reg = in32(GPIO0_OR);
+ out32(GPIO0_OR, tmp_reg & 0xff7fffff);
+
+ /*
+ * # CRAM Addreaa Valid
+ * set GPIO0_TCR.G10 = 1
+ * set GPIO0_OSRL.G10 = 0
+ * set GPIO0_OR.G10 = 0
+ */
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg | 0x00200000);
+ tmp_reg = in32(GPIO0_OSRL);
+ out32(GPIO0_OSRL, tmp_reg & 0xfffffbff);
+ tmp_reg = in32(GPIO0_OR);
+ out32(GPIO0_OR, tmp_reg & 0xffdfffff);
+
+ /*
+ * # config input (EBC_WAIT)
+ * set GPIO0_ISR1L.G9 = 1
+ * set GPIO0_TCR.G9 = 0
+ */
+ tmp_reg = in32(GPIO0_ISR1L);
+ out32(GPIO0_ISR1L, tmp_reg | 0x00001000);
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg & 0xffbfffff);
+
+ /*
+ * # config CS4 from GPIO
+ * set GPIO0_TCR.G0 = 1
+ * set GPIO0_OSRL.G0 = 1
+ */
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg | 0x80000000);
+ tmp_reg = in32(GPIO0_OSRL);
+ out32(GPIO0_OSRL, tmp_reg | 0x40000000);
+
+ /*
+ * #2. EBC in Async mode
+ * # set EBC0_PB1AP = 0x078f0ec0
+ * set EBC0_PB1AP = 0x078f1ec0
+ * set EBC0_PB2AP = 0x078f1ec0
+ */
+ mtebc(pb1ap, 0x078F1EC0);
+ mtebc(pb2ap, 0x078F1EC0);
+
+ /*
+ * #set EBC0_PB1CR = 0x000bc000
+ * #enable CS2 for CRAM
+ * set EBC0_PB2CR = 0x020bc000
+ */
+ mtebc(pb1cr, 0x000BC000);
+ mtebc(pb2cr, 0x020BC000);
+
+ /*
+ * #3. set CRAM in Sync mode
+ * #exec cm_bcr_write.cmd { 0x701f }
+ * #3. set CRAM in Sync mode (full drv strength)
+ * exec cm_bcr_write.cmd { 0x701F }
+ */
+ cram_wr_val = 0x7012; /* CRAM burst setting */
+ cram_bcr_write(cram_wr_val);
+
+ /*
+ * #4. EBC in Sync mode
+ * #set EBC0_PB1AP = 0x9f800fc0
+ * #set EBC0_PB1AP = 0x900001c0
+ * set EBC0_PB2AP = 0x9C0201c0
+ * set EBC0_PB2AP = 0x9C0201c0
+ */
+ mtebc(pb1ap, 0x9C0201C0);
+ mtebc(pb2ap, 0x9C0201C0);
+
+ /*
+ * #5. EBC need to program READY, CLK, ADV for Sync mode
+ * # config output
+ * set GPIO0_TCR.G8 = 1
+ * set GPIO0_OSRL.G8 = 1
+ * set GPIO0_TCR.G10 = 1
+ * set GPIO0_OSRL.G10 = 1
+ */
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg | 0x00800000);
+ tmp_reg = in32(GPIO0_OSRL);
+ out32(GPIO0_OSRL, tmp_reg | 0x00004000);
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg | 0x00200000);
+ tmp_reg = in32(GPIO0_OSRL);
+ out32(GPIO0_OSRL, tmp_reg | 0x00000400);
+
+ /*
+ * # config input
+ * set GPIO0_ISR1L.G9 = 1
+ * set GPIO0_TCR.G9 = 0
+ */
+ tmp_reg = in32(GPIO0_ISR1L);
+ out32(GPIO0_ISR1L, tmp_reg | 0x00001000);
+ tmp_reg = in32(GPIO0_TCR);
+ out32(GPIO0_TCR, tmp_reg & 0xffbfffff);
+
+ /*
+ * # config EBC to use RDY
+ * set SDR0_ULTRA0.EBCREN = 1
+ */
+ mfsdr(sdrultra0, tmp_reg);
+ mtsdr(sdrultra0, tmp_reg | 0x04000000);
+
+ /*
+ * set EPLD0_MUX_CTL.OESPR3 = 0
+ */
+
+
+ mtspr(SPRG7, LOAK_CRAM); /* "CRAM" */
+ } /* if (already_inited != 1) */
+
+ return (64 * 1024 * 1024);
+}
+
+/******
+ * return 0 if not PSRAM
+ * return 1 if is PSRAM
+ ******/
+static int is_psram(u32 addr)
+{
+ u32 test_pattern = 0xdeadbeef;
+ volatile u32 readback;
+
+ if (addr == CFG_SDRAM_BASE) {
+ /* This is to temp enable OE for PSRAM */
+ out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f);
+ udelay(10000);
+ }
+
+ out32(addr, test_pattern);
+ asm volatile(" sync");
+ asm volatile(" eieio");
+
+ readback = (volatile u32) in32(addr);
+ asm volatile(" sync");
+ asm volatile(" eieio");
+ if (readback == test_pattern) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static long int psram_init(void)
+{
+ u32 readback;
+ long psramsize = 0;
+ int i;
+
+ /* This is to temp enable OE for PSRAM */
+ out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f);
+ udelay(10000);
+
+ /*
+ * PSRAM bank 1: read then write to address 0x00000000
+ */
+ for (i = 0; i < 100; i++) {
+ if (is_psram(CFG_SDRAM_BASE + (i*256)) == 1) {
+ readback = PSRAM_PASS;
+ } else {
+ readback = PSRAM_FAIL;
+ break;
+ }
+ }
+ if (readback == PSRAM_PASS) {
+ debug("psram_init(bank0): pass\n");
+ psramsize = (16 * 1024 * 1024);
+ } else {
+ debug("psram_init(bank0): fail\n");
+ return 0;
+ }
+
+#if 0
+ /*
+ * PSRAM bank 1: read then write to address 0x01000000
+ */
+ for (i = 0; i < 100; i++) {
+ if (is_psram((1 << 24) + (i*256)) == 1) {
+ readback = PSRAM_PASS;
+ } else {
+ readback = PSRAM_FAIL;
+ break;
+ }
+ }
+ if (readback == PSRAM_PASS) {
+ debug("psram_init(bank1): pass\n");
+ psramsize = psramsize + (16 * 1024 * 1024);
+ }
+#endif
+
+ mtspr(SPRG7, LOAK_PSRAM); /* "PSRA" - PSRAM */
+
+ return psramsize;
+}
+
+long int initdram(int board_type)
+{
+ long int sram_size;
+ u32 cram_inited;
+
+ /* Determine Attached Memory Expansion Card*/
+ cram_inited = is_cram();
+ if (cram_inited != 0) { /* CRAM */
+ debug("CRAM Expansion Card attached\n");
+ sram_size = cram_init(cram_inited);
+ } else if (is_psram(CFG_SDRAM_BASE+4) == 1) { /* PSRAM */
+ debug("PSRAM Expansion Card attached\n");
+ sram_size = psram_init();
+ } else { /* no SRAM */
+ debug("No Memory Card Attached!!\n");
+ sram_size = 0;
+ }
+
+ return sram_size;
+}
+
+int testdram(void)
+{
+ return (0);
+}
diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds
new file mode 100644
index 000000000..be030923b
--- /dev/null
+++ b/board/amcc/acadia/u-boot.lds
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
new file mode 100755
index 000000000..9e02ca31b
--- /dev/null
+++ b/include/configs/acadia.h
@@ -0,0 +1,424 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * acadia.h - configuration for AMCC Acadia (405EZ)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ACADIA 1 /* Board is Acadia */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EZ 1 /* Specifc 405EZ support*/
+#undef CFG_DRAM_TEST /* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+
+#define CONFIG_NO_SERIAL_EEPROM
+/*#undef CONFIG_NO_SERIAL_EEPROM*/
+
+#ifdef CONFIG_NO_SERIAL_EEPROM
+
+/*----------------------------------------------------------------------------
+ * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
+ * assuming a 66MHz input clock to the 405EZ.
+ *---------------------------------------------------------------------------*/
+/* #define PLLMR0_100_100_12 */
+#define PLLMR0_200_133_66
+/* #define PLLMR0_266_160_80 */
+/* #define PLLMR0_333_166_83 */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFE000000
+#define CFG_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (384 * 1024)/* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */
+
+/*
+ * Define here the location of the environment variables (FLASH).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+ #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#endif
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=acadia\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=acadia/uImage\0" \
+ "kernel_addr=fff10000\0" \
+ "ramdisk_addr=fff20000\0" \
+ "initrd_high=30000000\0" \
+ "load=tftp 200000 acadia/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b ${fileaddr} fffc0000 ${filesize};" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ "kozio=bootm ffc60000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_NET_MULTI 1
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+#if 0 /* test-only */
+#define TEST_ONLY_NAND
+#endif
+
+#ifdef TEST_ONLY_NAND
+#define CMD_NAND CFG_CMD_NAND
+#else
+#define CMD_NAND 0
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_SUPPORT_VFAT
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DTT | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CMD_NAND | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_USB)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+#if 0 /* test-only... */
+/*-----------------------------------------------------------------------
+ * SPI stuff - Define to include SPI control
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_SPI
+#endif
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+#ifdef TEST_ONLY_NAND
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE (CFG_NAND + CFG_NAND_CS)
+#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+#define CFG_NAND 0xd0000000
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+
+/* Memory Bank 0 (Flash) initialization */
+#define CFG_EBC_PB0AP 0x03337200
+#define CFG_EBC_PB0CR 0xfe0bc000 /* BAS=0xFE0,BS=32MB,BU=R/W,BW=32bit */
+
+/* Memory Bank 1 (CRAM) initialization */
+#define CFG_EBC_PB1AP 0x030400c0
+#define CFG_EBC_PB1CR 0x000bc000
+
+/* Memory Bank 2 (CRAM) initialization */
+#define CFG_EBC_PB2AP 0x030400c0
+#define CFG_EBC_PB2CR 0x020bc000
+
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000)
+
+/* Memory Bank 4 (CPLD) initialization */
+#define CFG_EBC_PB4AP 0x04006000
+#define CFG_EBC_PB4CR 0x80018000 /* BAS=0x000,BS=16MB,BU=R/W,BW=32bit */
+
+#define CFG_EBC_CFG 0xf8400000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO_0 setup (PPC405EZ specific)
+ *
+ * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs
+ * GPIO0[4] - External Bus Controller Hold Input
+ * GPIO0[5] - External Bus Controller Priority Input
+ * GPIO0[6] - External Bus Controller HLDA Output
+ * GPIO0[7] - External Bus Controller Bus Request Output
+ * GPIO0[8] - CRAM Clk Output
+ * GPIO0[9] - External Bus Controller Ready Input
+ * GPIO0[10] - CRAM Adv Output
+ * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled
+ * GPIO0[25] - External DMA Request Input
+ * GPIO0[26] - External DMA EOT I/O
+ * GPIO0[25] - External DMA Ack_n Output
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[28-30] - Trace Outputs / PWM Inputs
+ * GPIO0[31] - PWM_8 I/O
+ */
+#define CFG_GPIO0_TCR 0xC0000000
+#define CFG_GPIO0_OSRL 0x50000000
+#define CFG_GPIO0_OSRH 0x00000055
+#define CFG_GPIO0_ISR1L 0x00000000
+#define CFG_GPIO0_ISR1H 0x00000055
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TSRH 0x00000055
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO_1 setup (PPC405EZ specific)
+ *
+ * GPIO1[0-6] - PWM_9 to PWM_15 I/O
+ * GPIO1[7] - PWM_DIV_CLK (Out) / IRQ4 Input
+ * GPIO1[8] - TS5 Output / DAC_IP_TRIG Input
+ * GPIO1[9] - TS6 Output / ADC_IP_TRIG Input
+ * GPIO1[10-12] - UART0 Control Inputs
+ * GPIO1[13] - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input
+ * GPIO1[14] - UART0_RTS_N Output/SPI_SS_2_N Output
+ * GPIO1[15] - SPI_SS_3_N Output/UART0_RI_N Input
+ * GPIO1[16] - SPI_SS_1_N Output
+ * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs
+ */
+#define CFG_GPIO1_OSRH 0x55455555
+#define CFG_GPIO1_OSRL 0x40000110
+#define CFG_GPIO1_ISR1H 0x00000000
+#define CFG_GPIO1_ISR1L 0x15555445
+#define CFG_GPIO1_TSRH 0x00000000
+#define CFG_GPIO1_TSRL 0x00000000
+#define CFG_GPIO1_TCR 0xFFFF8014
+
+/*-----------------------------------------------------------------------
+ * EPLD Regs.
+ */
+#define EPLD_BASE 0x80000000
+#define EPLD_ETHRSTBOOT 0x10
+#define EPLD_CTRL 0x14
+#define EPLD_MUXOE 0x16
+
+/*
+ * State definations
+ */
+#define LOAK_INIT 0x494e4954 /* ASCII "INIT" */
+#define LOAK_NONE 0x4e4f4e45 /* ASCII "NONE" */
+#define LOAK_CRAM 0x4352414d /* ASCII "CRAM" */
+#define LOAK_PSRAM 0x50535241 /* ASCII "PSRA" - PSRAM */
+#define LOAK_OCM 0x4f434d20 /* ASCII "OCM " */
+#define LOAK_ZERO 0x5a45524f /* ASCII "ZERO" */
+#define LOAK_SPL 0x53504c20 /* ASCII "SPL" */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-11-04 04:42:06 +0000