diff options
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/start.S | 84 |
1 files changed, 40 insertions, 44 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index ac17f9d3c..7912a4b24 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -282,46 +282,6 @@ l2_disabled: isync .endm -#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) -/* - * TLB entry for debuggging in AS1 - * Create temporary TLB entry in AS0 to handle debug exception - * As on debug exception MSR is cleared i.e. Address space is changed - * to 0. A TLB entry (in AS0) is required to handle debug exception generated - * in AS1. - */ - -#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) -/* - * TLB entry is created for IVPR + IVOR15 to map on valid OP code address - * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. - * and this window is outside of 4K boot window. - */ - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_4M, \ - CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ - 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 - -#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 -#else -/* - * TLB entry is created for IVPR + IVOR15 to map on valid OP code address - * because "nexti" will resize TLB to 4K - */ - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_256K, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I, \ - CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 -#endif -#endif - /* * Ne need to setup interrupt vector for NAND SPL * because NAND SPL never compiles it. @@ -534,10 +494,6 @@ nexti: mflr r1 /* R1 = our PC */ li r3, 0 mtspr MAS1, r3 1: cmpw r3, r14 -#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) - cmpwi cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB - cror cr0*4+eq, cr0*4+eq, cr1*4+eq -#endif rlwinm r5, r3, 16, MAS0_ESEL_MSK addi r3, r3, 1 beq 2f /* skip the entry we're executing from */ @@ -553,6 +509,46 @@ nexti: mflr r1 /* R1 = our PC */ 2: cmpw r3, r4 blt 1b +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) +/* + * TLB entry for debuggging in AS1 + * Create temporary TLB entry in AS0 to handle debug exception + * As on debug exception MSR is cleared i.e. Address space is changed + * to 0. A TLB entry (in AS0) is required to handle debug exception generated + * in AS1. + */ + +#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. + * and this window is outside of 4K boot window. + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#else +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * because "nexti" will resize TLB to 4K + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#endif +#endif + /* * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default * location is not where we want it. This typically happens on a 36-bit |