diff options
114 files changed, 7030 insertions, 1100 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c6fd55529..4297fe1ce 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -472,6 +472,10 @@ Ira W. Snyder <iws@ovro.caltech.edu> P2020COME P2020 +York Sun <yorksun@freescale.com> + + T4240EMU T4240 + Timur Tabi <timur@freescale.com> MPC8349E-mITX MPC8349 @@ -539,6 +543,10 @@ Detlev Zundel <dzu@denx.de> inka4x0 MPC5200 +Po Liu <po.liu@freescale.com> + + C29XPCIE C29X + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -406,13 +406,25 @@ The following options need to be configured: This is the value to write into CCSR offset 0x18600 according to the A004510 workaround. + CONFIG_SYS_FSL_DSP_DDR_ADDR + This value denotes start offset of DDR memory which is + connected exclusively to the DSP cores. + CONFIG_SYS_FSL_DSP_M2_RAM_ADDR This value denotes start offset of M2 memory which is directly connected to the DSP core. + CONFIG_SYS_FSL_DSP_M3_RAM_ADDR + This value denotes start offset of M3 memory which is directly + connected to the DSP core. + CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. + CONFIG_SYS_FSL_DDR_EMU + Specify emulator support for DDR. Some DDR features such as + deskew training are not available. + - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 02f5f8a8d..2dfcc2e65 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -78,4 +78,5 @@ #define USB0_OTG_BASE 0x47401000 #define USB1_OTG_BASE 0x47401800 +int clk_get(int clk); #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 8916d9d16..498a9ffc0 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -291,7 +291,7 @@ struct exynos_platform_mipi_dsim { */ struct mipi_dsim_master_ops { int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, unsigned int data0, unsigned int data1); int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h index 5f516ef6e..d5c1f7f25 100644 --- a/arch/arm/include/asm/imx-common/dma.h +++ b/arch/arm/include/asm/imx-common/dma.h @@ -161,4 +161,6 @@ void mxs_dma_init(void); int mxs_dma_init_channel(int chan); int mxs_dma_release(int chan); +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc); + #endif /* __DMA_H__ */ diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index cd2973478..3a891ba62 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -7,4 +7,7 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH + #endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index e9f82f711..f91406c06 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -19,11 +19,7 @@ LGOBJS := $(addprefix $(obj),$(GLSOBJS)) SOBJS-y += COBJS-y += board.o -ifeq ($(CONFIG_QEMU_MIPS),y) -COBJS-$(CONFIG_CMD_BOOTM) += bootm_qemu_mips.o -else COBJS-$(CONFIG_CMD_BOOTM) += bootm.o -endif SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index ade9af47e..66340ea47 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -17,23 +17,148 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 +#if defined(CONFIG_QEMU_MALTA) +#define mips_boot_qemu_malta 1 +#else +#define mips_boot_qemu_malta 0 +#endif + static int linux_argc; static char **linux_argv; +static char *linux_argp; static char **linux_env; static char *linux_env_p; static int linux_env_idx; -static void linux_params_init(ulong start, char *commandline); -static void linux_env_set(char *env_name, char *env_val); +static ulong arch_get_sp(void) +{ + ulong ret; + + __asm__ __volatile__("move %0, $sp" : "=r"(ret) : ); + + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + sp = arch_get_sp(); + debug("## Current stack ends at 0x%08lx\n", sp); + + /* adjust sp by 4K to be safe */ + sp -= 4096; + lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp); +} + +static void linux_cmdline_init(void) +{ + linux_argc = 1; + linux_argv = (char **)UNCACHED_SDRAM(gd->bd->bi_boot_params); + linux_argv[0] = 0; + linux_argp = (char *)(linux_argv + LINUX_MAX_ARGS); +} + +static void linux_cmdline_set(const char *value, size_t len) +{ + linux_argv[linux_argc] = linux_argp; + memcpy(linux_argp, value, len); + linux_argp[len] = 0; + + linux_argp += len + 1; + linux_argc++; +} + +static void linux_cmdline_dump(void) +{ + int i; + + debug("## cmdline argv at 0x%p, argp at 0x%p\n", + linux_argv, linux_argp); + + for (i = 1; i < linux_argc; i++) + debug(" arg %03d: %s\n", i, linux_argv[i]); +} + +static void boot_cmdline_linux(bootm_headers_t *images) +{ + const char *bootargs, *next, *quote; + + linux_cmdline_init(); + + bootargs = getenv("bootargs"); + if (!bootargs) + return; + + next = bootargs; + + while (bootargs && *bootargs && linux_argc < LINUX_MAX_ARGS) { + quote = strchr(bootargs, '"'); + next = strchr(bootargs, ' '); + + while (next && quote && quote < next) { + /* + * we found a left quote before the next blank + * now we have to find the matching right quote + */ + next = strchr(quote + 1, '"'); + if (next) { + quote = strchr(next + 1, '"'); + next = strchr(next + 1, ' '); + } + } + + if (!next) + next = bootargs + strlen(bootargs); + + linux_cmdline_set(bootargs, next - bootargs); + + if (*next) + next++; + + bootargs = next; + } + + linux_cmdline_dump(); +} + +static void linux_env_init(void) +{ + linux_env = (char **)(((ulong) linux_argp + 15) & ~15); + linux_env[0] = 0; + linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS); + linux_env_idx = 0; +} + +static void linux_env_set(const char *env_name, const char *env_val) +{ + if (linux_env_idx < LINUX_MAX_ENVS - 1) { + linux_env[linux_env_idx] = linux_env_p; + + strcpy(linux_env_p, env_name); + linux_env_p += strlen(env_name); + + if (mips_boot_qemu_malta) { + linux_env_p++; + linux_env[++linux_env_idx] = linux_env_p; + } else { + *linux_env_p++ = '='; + } + + strcpy(linux_env_p, env_val); + linux_env_p += strlen(env_val); + + linux_env_p++; + linux_env[++linux_env_idx] = 0; + } +} static void boot_prep_linux(bootm_headers_t *images) { - char *commandline = getenv("bootargs"); char env_buf[12]; - char *cp; - - linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); + const char *cp; + ulong rd_start, rd_size; #ifdef CONFIG_MEMSIZE_IN_BYTES sprintf(env_buf, "%lu", (ulong)gd->ram_size); @@ -41,15 +166,20 @@ static void boot_prep_linux(bootm_headers_t *images) #else sprintf(env_buf, "%lu", (ulong)(gd->ram_size >> 20)); debug("## Giving linux memsize in MB, %lu\n", - (ulong)(gd->ram_size >> 20)); + (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ + rd_start = UNCACHED_SDRAM(images->initrd_start); + rd_size = images->initrd_end - images->initrd_start; + + linux_env_init(); + linux_env_set("memsize", env_buf); - sprintf(env_buf, "0x%08X", (uint) UNCACHED_SDRAM(images->rd_start)); + sprintf(env_buf, "0x%08lX", rd_start); linux_env_set("initrd_start", env_buf); - sprintf(env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); + sprintf(env_buf, "0x%lX", rd_size); linux_env_set("initrd_size", env_buf); sprintf(env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); @@ -65,33 +195,42 @@ static void boot_prep_linux(bootm_headers_t *images) cp = getenv("eth1addr"); if (cp) linux_env_set("eth1addr", cp); + + if (mips_boot_qemu_malta) + linux_env_set("modetty0", "38400n8r"); } static void boot_jump_linux(bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; + typedef void __noreturn (*kernel_entry_t)(int, ulong, ulong, ulong); + kernel_entry_t kernel = (kernel_entry_t) images->ep; + ulong linux_extra = 0; - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); + debug("## Transferring control to Linux (at address %p) ...\n", kernel); bootstage_mark(BOOTSTAGE_ID_RUN_OS); + if (mips_boot_qemu_malta) + linux_extra = gd->ram_size; + /* we assume that the kernel is in place */ printf("\nStarting kernel ...\n\n"); - theKernel(linux_argc, linux_argv, linux_env, 0); + kernel(linux_argc, (ulong)linux_argv, (ulong)linux_env, linux_extra); } int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* No need for those on MIPS */ - if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE) + if (flag & BOOTM_STATE_OS_BD_T) return -1; + if (flag & BOOTM_STATE_OS_CMDLINE) { + boot_cmdline_linux(images); + return 0; + } + if (flag & BOOTM_STATE_OS_PREP) { boot_prep_linux(images); return 0; @@ -102,76 +241,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], return 0; } + boot_cmdline_linux(images); boot_prep_linux(images); boot_jump_linux(images); /* does not return */ return 1; } - -static void linux_params_init(ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr(line, '"'); - next = strchr(line, ' '); - - while (next && quote && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr(quote + 1, '"'); - if (next) { - quote = strchr(next + 1, '"'); - next = strchr(next + 1, ' '); - } - } - - if (!next) - next = line + strlen(line); - - linux_argv[linux_argc] = argp; - memcpy(argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; - } - - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set(char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy(linux_env_p, env_name); - linux_env_p += strlen(env_name); - - strcpy(linux_env_p, "="); - linux_env_p += 1; - - strcpy(linux_env_p, env_val); - linux_env_p += strlen(env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } -} diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c deleted file mode 100644 index 910ab7363..000000000 --- a/arch/mips/lib/bootm_qemu_mips.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2008 - * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <image.h> -#include <asm/byteorder.h> -#include <asm/addrspace.h> - -DECLARE_GLOBAL_DATA_PTR; - -int do_bootm_linux(int flag, int argc, char * const argv[], - bootm_headers_t *images) -{ - void (*theKernel) (int, char **, char **, int *); - char *bootargs = getenv("bootargs"); - char *start; - uint len; - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; - - bootstage_mark(BOOTSTAGE_ID_RUN_OS); - - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); - - gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256; - debug("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); - - /* set Magic */ - *(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678; - /* set ram_size */ - *(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size; - - start = (char *)gd->bd->bi_boot_params; - - len = strlen(bootargs); - - strncpy(start, bootargs, len + 1); - - start += len; - - len = images->rd_end - images->rd_start; - if (len > 0) { - start += sprintf(start, " rd_start=0x%08X rd_size=0x%0X", - (uint) UNCACHED_SDRAM(images->rd_start), - (uint) len); - } - - /* we assume that the kernel is in place */ - printf("\nStarting kernel ...\n\n"); - - theKernel(0, NULL, NULL, 0); - - /* does not return */ - return 1; -} diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index 09970b058..28c25e5fe 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -299,6 +299,8 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) printf("PCIE%d: ", bus); +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ reg16 = in_le16(hose_cfg_base + PCI_LTSSM); if (reg16 >= PCI_LTSSM_L0) printf("link\n"); diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 0d1e8f1f0..f70f0d747 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8568) += ddr-gen2.o COBJS-$(CONFIG_MPC8544) += ddr-gen2.o # supports ddr1/2/3 +COBJS-$(CONFIG_PPC_C29X) += ddr-gen3.o COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o COBJS-$(CONFIG_MPC8569) += ddr-gen3.o @@ -100,6 +101,7 @@ COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support +COBJS-$(CONFIG_PPC_C29X) += c29x_serdes.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 53c6a7faf..39b8e3ecc 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -41,8 +41,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #ifdef CONFIG_SYS_SRIO struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); #endif @@ -112,10 +112,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c new file mode 100644 index 000000000..51972cb7c --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c @@ -0,0 +1,62 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS1_MAX_LANES]; +}; + +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {2, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {3, {PCIE1, PCIE1, NONE, NONE} }, + {4, {PCIE1, PCIE1, NONE, NONE} }, + {5, {PCIE1, NONE, NONE, NONE} }, + {6, {PCIE1, NONE, NONE, NONE} }, + {} +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + return (1 << device) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + const struct serdes_config *ptr; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + ptr = &serdes1_cfg_tbl[srds_cfg]; + if (!ptr->protocol) + return; + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = ptr->lanes[lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 5cd02ccde..cbb443fd2 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -245,6 +245,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 puts("Work-around for Erratum A006593 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + puts("Work-around for Erratum A-005812 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 91ac4ee61..66bc6a2ea 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -44,10 +44,10 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if (defined(CONFIG_DDR_CLK_FREQ) || \ - defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif /* CONFIG_FSL_CORENET */ +#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif /* * Cornet platforms use ddr sync bit in RCW to indicate sync vs async @@ -211,6 +211,21 @@ int checkcpu (void) puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n"); +#ifdef CONFIG_FSL_CORENET + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); +#endif + return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 25beda233..48b38263f 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -399,6 +399,14 @@ int cpu_init_r(void) sync(); } #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running + * in write shadow mode. Checking DCWS before setting SPR 976. + */ + if (mfspr(L1CSR2) & L1CSR2_DCWS) + mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000)); +#endif #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) spin = getenv("spin_table_compat"); @@ -532,8 +540,10 @@ skip_l2: enable_cpc(); +#ifndef CONFIG_SYS_FSL_NO_SERDES /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A005871 if (IS_SVR_REV(svr, 1, 0)) { diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c index 8a86819fb..4dd8c0b5b 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index a70586252..542bc84ac 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -16,7 +16,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index c5b47200e..1be51d330 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -15,8 +15,18 @@ #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL #endif + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; @@ -54,6 +64,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } + if (step == 2) + goto step2; + if (regs->ddr_eor) out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 @@ -123,10 +136,17 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + if (regs->ddr_wrlvl_cntl_2) out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); if (regs->ddr_wrlvl_cntl_3) out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); @@ -150,6 +170,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[21], 0x24000000); #endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */ + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: /* Set, but do not enable the memory */ temp_sdram_cfg = regs->ddr_sdram_cfg; temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index cfaa2edce..84bb8fab8 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -604,8 +604,12 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_add_enet_stashing(blob); +#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV +#define CONFIG_FSL_TBCLK_EXTRA_DIV 1 +#endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", get_tbclk(), 1); + "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, + 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); get_sys_info(&sysinfo); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h index 6de572d59..d515b234a 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -9,5 +9,4 @@ int is_serdes_prtcl_valid(int serdes, u32 prtcl); int serdes_lane_enabled(int lane); -enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 15bbbc15a..c15e83b52 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -226,6 +226,21 @@ __secondary_start_page: 2: #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in + * write shadow mode. This code should run after other code setting + * DCWS. + */ + mfspr r3,L1CSR2 + andis. r3,r3,(L1CSR2_DCWS)@h + beq 1f + mfspr r3, SPRN_HDBCR0 + oris r3, r3, 0x8000 + mtspr SPRN_HDBCR0, r3 +1: +#endif + #ifdef CONFIG_BACKSIDE_L2_CACHE /* skip L2 setup on P2040/P2040E as they have no L2 */ mfspr r3,SPRN_SVR diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index cfc3a60d2..ad57a9cfa 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -33,7 +33,8 @@ #define MINIMAL_SPL #endif -#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && \ + !defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define NOR_BOOT #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index e173cb5f9..54c1cfd2c 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -65,8 +65,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #endif struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); @@ -159,10 +159,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c index 92ba26dc8..33a91f9f7 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr; diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c index 02cd0debc..02a046789 100644 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ b/arch/powerpc/cpu/mpc8xx/video.c @@ -109,7 +109,6 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> #ifdef CONFIG_VIDEO_LOGO #include <video_logo.h> /* Get logo data, width and height */ diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 7369582ef..c67be4ef2 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -79,6 +79,9 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), CPU_TYPE_ENTRY(BSC9232, 9232, 2), + CPU_TYPE_ENTRY(C291, C291, 1), + CPU_TYPE_ENTRY(C292, C292, 1), + CPU_TYPE_ENTRY(C293, C293, 1), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index ff5812df5..242eb47ac 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -364,7 +364,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ddr->timing_cfg_3 = (0 | ((ext_pretoact & 0x1) << 28) - | ((ext_acttopre & 0x2) << 24) + | ((ext_acttopre & 0x3) << 24) | ((ext_acttorw & 0x1) << 22) | ((ext_refrec & 0x1F) << 16) | ((ext_caslat & 0x3) << 12) @@ -681,6 +681,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ unsigned int slow = 0; /* DDR will be run less than 1250 */ + unsigned int x4_en = 0; /* x4 DRAM enable */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -725,6 +726,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, ap_en = 0; } + x4_en = popts->x4_en ? 1 : 0; + #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Use the DDR controller to auto initialize memory. */ d_init = popts->ECC_init_using_memctl; @@ -747,6 +750,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) | ((slow & 1) << 11) + | (x4_en << 10) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1585,8 +1589,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, | ((ea & 0xFFF) << 0) /* ending address MSB */ ); } else { - debug("FSLDDR: setting bnds to 0 for inactive CS\n"); - ddr->cs[i].bnds = 0; + /* setting bnds to 0xffffffff for inactive CS */ + ddr->cs[i].bnds = 0xffffffff; } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); @@ -1638,5 +1642,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_rcw(ddr, popts, common_dimm); +#ifdef CONFIG_SYS_FSL_DDR_EMU + /* disble DDR training for emulator */ + ddr->debug[2] = 0x00000400; + ddr->debug[4] = 0xff800000; +#endif return check_fsl_memctl_config_regs(ddr); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index 4dd55fc4c..c173a5a74 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -96,7 +96,7 @@ unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr); /* processor specific function */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); /* board specific function */ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 3e7c269e4..b67158c0f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -129,6 +129,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->ec_sdram_width = 0; pdimm->data_width = pdimm->primary_sdram_width + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); /* These are the types defined by the JEDEC DDR3 SPD spec */ pdimm->mirrored_dimm = 0; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index 1ed6c7715..260fce577 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -205,6 +205,7 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -263,6 +264,7 @@ static void print_dimm_parameters(const dimm_params_t *pdimm) DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -443,6 +445,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(twoT_en), CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), @@ -687,6 +690,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(registered_dimm_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 7a8636de1..9f4f25343 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -25,10 +25,6 @@ void fsl_ddr_set_lawbar( unsigned int ctrl_num); void fsl_ddr_set_intl3r(const unsigned int granule_size); -/* processor specific function */ -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - #if defined(SPD_EEPROM_ADDRESS) || \ defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) @@ -365,9 +361,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, { unsigned int i, j; unsigned long long total_mem = 0; + int assert_reset; fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; common_timing_params_t *timing_params = pinfo->common_timing_params; + assert_reset = board_need_mem_reset(); /* data bus width capacity adjust shift amount */ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS]; @@ -462,7 +460,20 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, timing_params[i].all_DIMMs_registered, &pinfo->memctl_opts[i], pinfo->dimm_params[i], i); + /* + * For RDIMMs, JEDEC spec requires clocks to be stable + * before reset signal is deasserted. For the boards + * using fixed parameters, this function should be + * be called from board init file. + */ + if (timing_params[i].all_DIMMs_registered) + assert_reset = 1; } + if (assert_reset) { + debug("Asserting mem reset\n"); + board_assert_mem_reset(); + } + case STEP_ASSIGN_ADDRESSES: /* STEP 5: Assign addresses to chip selects */ check_interleaving_options(pinfo); @@ -504,7 +515,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; if (reg->cs[j].config & 0x80000000) { unsigned int end; - end = reg->cs[j].bnds & 0xFFF; + /* + * 0xfffffff is a special value we put + * for unused bnds + */ + if (reg->cs[j].bnds == 0xffffffff) + continue; + end = reg->cs[j].bnds & 0xffff; if (end > max_end) { max_end = end; } @@ -531,6 +548,7 @@ phys_size_t fsl_ddr_sdram(void) unsigned int law_memctl = LAW_TRGT_IF_DDR_1; unsigned long long total_memory; fsl_ddr_info_t info; + int deassert_reset; /* Reset info structure. */ memset(&info, 0, sizeof(fsl_ddr_info_t)); @@ -559,7 +577,21 @@ phys_size_t fsl_ddr_sdram(void) } } - /* Program configuration registers. */ + /* + * Program configuration registers. + * JEDEC specs requires clocks to be stable before deasserting reset + * for RDIMMs. Clocks start after chip select is enabled and clock + * control register is set. During step 1, all controllers have their + * registers set but not enabled. Step 2 proceeds after deasserting + * reset through board FPGA or GPIO. + * For non-registered DIMMs, initialization can go through but it is + * also OK to follow the same flow. + */ + deassert_reset = board_need_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (info.common_timing_params[i].all_DIMMs_registered) + deassert_reset = 1; + } for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); if (info.common_timing_params[i].ndimms_present == 0) { @@ -567,8 +599,22 @@ phys_size_t fsl_ddr_sdram(void) "skipping programming\n", i); continue; } - - fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i); + /* + * The following call with step = 1 returns before enabling + * the controller. It has to finish with step = 2 later. + */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i, + deassert_reset ? 1 : 0); + } + if (deassert_reset) { + /* Use board FPGA or GPIO to deassert reset signal */ + debug("Deasserting mem reset\n"); + board_deassert_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + /* Call with step = 2 to continue initialization */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), + i, 2); + } } /* program LAWs */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 26369e099..30cdca497 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -700,6 +700,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } #endif + popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; + /* Choose burst length. */ #if defined(CONFIG_FSL_DDR3) #if defined(CONFIG_E500MC) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7ed93acdc..ce1bf0554 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -303,6 +303,7 @@ #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -336,6 +337,7 @@ #elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -366,9 +368,11 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -410,10 +414,12 @@ #define CONFIG_SYS_FSL_ERRATUM_A004849 #define CONFIG_SYS_FSL_ERRATUM_A004580 #define CONFIG_SYS_P4080_ERRATUM_PCIE_A003 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -444,6 +450,7 @@ #elif defined(CONFIG_PPC_P5040) #define CONFIG_SYS_PPC64 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -469,6 +476,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -492,6 +500,10 @@ #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000 +#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 +#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 +#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC @@ -536,6 +548,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 @@ -576,6 +589,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #else #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2 @@ -612,6 +626,18 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_C29X) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_TSECV2_1 +#define CONFIG_SYS_FSL_SEC_COMPAT 6 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h index ffe4db8b8..bd312ad5c 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h @@ -26,6 +26,7 @@ typedef struct dimm_params_s { unsigned int primary_sdram_width; unsigned int ec_sdram_width; unsigned int registered_dimm; + unsigned int device_width; /* x4, x8, x16 components */ /* SDRAM device parameters */ unsigned int n_row_addr; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 640d3297d..f4eec82d5 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -277,6 +277,7 @@ typedef struct memctl_options_s { unsigned int mirrored_dimm; unsigned int quad_rank_present; unsigned int ap_en; /* address parity enable for RDIMM */ + unsigned int x4_en; /* enable x4 devices */ /* Global Timing Parameters */ unsigned int cas_latency_override; @@ -330,9 +331,31 @@ extern phys_size_t fsl_ddr_sdram(void); extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +static void __board_assert_mem_reset(void) +{ +} + +static void __board_deassert_mem_reset(void) +{ +} + +void board_assert_mem_reset(void) + __attribute__((weak, alias("__board_assert_mem_reset"))); + +void board_deassert_mem_reset(void) + __attribute__((weak, alias("__board_deassert_mem_reset"))); + +static int __board_need_mem_reset(void) +{ + return 0; +} + +int board_need_mem_reset(void) + __attribute__((weak, alias("__board_need_mem_reset"))); + /* * The 85xx boards have a common prototype for fixed_sdram so put the * declaration here. diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index bea163676..37d3a2246 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -82,7 +82,7 @@ enum law_trgt_if { #ifndef CONFIG_MPC8641 LAW_TRGT_IF_PCIE_1 = 0x02, #endif -#if defined(CONFIG_BSC9131) +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) LAW_TRGT_IF_OCN_DSP = 0x03, #else #if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020) @@ -92,9 +92,14 @@ enum law_trgt_if { LAW_TRGT_IF_LBC = 0x04, LAW_TRGT_IF_CCSR = 0x08, LAW_TRGT_IF_DSP_CCSR = 0x09, + LAW_TRGT_IF_PLATFORM_SRAM = 0x0a, LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, +#if defined(CONFIG_BSC9132) + LAW_TRGT_IF_CLASS_DSP = 0x0d, +#else LAW_TRGT_IF_RIO_2 = 0x0d, +#endif LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 3f543d924..44bc88dce 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -29,6 +29,13 @@ struct srio_liodn_id_table { + CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ } +#define SET_SRIO_LIODN_BASE(port, id_a) \ + { .id = { id_a }, .num_ids = 1, .portid = port, \ + .reg_offset[0] = offsetof(struct ccsr_rio, liodn) \ + + (port - 1) * 0x200 \ + + CONFIG_SYS_FSL_SRIO_ADDR, \ + } + struct liodn_id_table { const char * compat; u32 id[2]; diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index c740da37c..749411c10 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2012 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -13,6 +13,34 @@ #define PEX_IP_BLK_REV_2_2 0x02080202 #define PEX_IP_BLK_REV_2_3 0x02080203 +#define PEX_IP_BLK_REV_3_0 0x02080300 + +/* Freescale-specific PCI config registers */ +#define FSL_PCI_PBFR 0x44 + +#ifdef CONFIG_SYS_FSL_PCI_VER_3_X +/* Currently only the PCIe capability is used, so hardcode the offset. + * if more capabilities need to be justified, the capability link method + * should be applied here + */ +#define FSL_PCIE_CAP_ID 0x70 +#define PCI_DCR 0x78 /* PCIe Device Control Register */ +#define PCI_DSR 0x7a /* PCIe Device Status Register */ +#define PCI_LSR 0x82 /* PCIe Link Status Register */ +#define PCI_LCR 0x80 /* PCIe Link Control Register */ +#else +#define FSL_PCIE_CAP_ID 0x4c +#define PCI_DCR 0x54 /* PCIe Device Control Register */ +#define PCI_DSR 0x56 /* PCIe Device Status Register */ +#define PCI_LSR 0x5e /* PCIe Link Status Register */ +#define PCI_LCR 0x5c /* PCIe Link Control Register */ +#endif + +#define FSL_PCIE_CFG_RDY 0x4b0 +#define FSL_PROG_IF_AGENT 0x1 + +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); @@ -149,7 +177,10 @@ typedef struct ccsr_pci { u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */ char res23[200]; u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ - char res24[252]; + char res24[16]; + u32 pex_csr0; /* 0xf14 - PEX Control/Status register 0*/ + u32 pex_csr1; /* 0xf18 - PEX Control/Status register 1*/ + char res25[228]; } ccsr_fsl_pci_t; #define PCIE_CONFIG_PC 0x00020000 #define PCIE_CONFIG_OB_CK 0x00002000 diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 59189adb3..1106d2805 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -90,6 +90,7 @@ void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #else int serdes_get_first_lane(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 81b3322fe..2ed384e30 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1544,6 +1544,18 @@ struct rio_pw { }; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN +struct rio_liodn { + u32 plbr; + u8 res0[28]; + u32 plaor; + u8 res1[12]; + u32 pludr; + u32 plldr; + u8 res2[456]; +}; +#endif + /* RapidIO Registers */ struct ccsr_rio { struct rio_arch arch; @@ -1566,6 +1578,10 @@ struct ccsr_rio { u8 res7[100]; struct rio_pw pw; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN + u8 res5[8192]; + struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +#endif }; #endif @@ -2131,6 +2147,11 @@ typedef struct ccsr_gur { #ifdef CONFIG_MPC8536 #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 +#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \ + & MPC85xx_PORDEVSR2_DDR_SPD_0) \ + >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT)) #else #if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 @@ -2178,6 +2199,9 @@ typedef struct ccsr_gur { #elif defined(CONFIG_BSC9132) #define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2193,6 +2217,10 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 u32 pordbgmsr; /* POR debug mode status */ u32 pordevsr2; /* POR I/O device status 2 */ +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008 +#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3 +#endif /* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 u8 res1[8]; @@ -2339,6 +2367,11 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 #define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 #endif +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PMUXCR_SPI_MASK 0x00000300 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2526,7 +2559,9 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SWRST 0x10000000 -#define SRDS_RSTCTL_SDPD 0x00000020 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 u32 pllcr0; /* PLL Control Register 0 */ #define SRDS_PLLCR0_POFF 0x80000000 #define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 @@ -3008,12 +3043,18 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#elif defined(CONFIG_TSECV2_1) +#define CONFIG_SYS_TSEC1_OFFSET 0x10000 #else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#if defined(CONFIG_PPC_C29X) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000 +#else #define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 +#endif #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 @@ -3031,6 +3072,12 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 #define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 +#if defined(CONFIG_BSC9132) +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000 +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \ + (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET) +#endif + #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) #define CONFIG_SYS_FSL_QMAN_ADDR \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 56b22d840..64a6f9c54 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1119,6 +1119,9 @@ #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 #define SVR_T4160 0x824100 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index c78699779..c4444c7c7 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/arch/davinci_misc.h> #include <asm/gpio.h> -#include <asm/arch/da8xx-fb.h> +#include "../../../drivers/video/da8xx-fb.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +43,30 @@ static const struct da8xx_panel lcd_panel = { .invert_pxl_clk = 0, }; +static const struct display_panel disp_panel = { + QVGA, + 16, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 255, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + /* SPI0 pin muxer settings */ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 1 }, @@ -259,7 +283,7 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - da8xx_video_init(&lcd_panel, 16); + da8xx_video_init(&lcd_panel, &lcd_cfg, 16); return 0; } diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 86e44eae0..f74651c52 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -21,12 +21,14 @@ #include "../common/qixis.h" #include "../common/vsc3316_3308.h" +#include "../common/idt8t49n222a_serdes_clk.h" #include "b4860qds.h" #include "b4860qds_qixis.h" #include "b4860qds_crossbar_con.h" #define CLK_MUX_SEL_MASK 0x4 #define ETH_PHY_CLK_OUT 0x4 +#define PLL_NUM 2 DECLARE_GLOBAL_DATA_PTR; @@ -35,8 +37,6 @@ int checkboard(void) char buf[64]; u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - unsigned int i; static const char *const freq[] = {"100", "125", "156.25", "161.13", "122.88", "122.88", "122.88"}; int clock; @@ -61,19 +61,6 @@ int checkboard(void) /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could @@ -252,6 +239,106 @@ int configure_vsc3316_3308(void) return 0; } +int config_serdes1_refclks(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 serdes1_prtcl, lane; + unsigned int flag_sgmii_prtcl = 0; + int ret, i; + + serdes1_prtcl = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + if (!serdes1_prtcl) { + printf("SERDES1 is not enabled\n"); + return -1; + } + serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl); + + /* Clear SRDS_RSTCTL_RST bit for both PLLs before changing refclks + */ + for (i = 0; i < PLL_NUM; i++) + clrbits_be32(&srds_regs->bank[i].rstctl, SRDS_RSTCTL_RST); + /* Reconfigure IDT idt8t49n222a device for CPRI to work + * For this SerDes1's Refclk1 and refclk2 need to be set + * to 122.88MHz + */ + switch (serdes1_prtcl) { + case 0x2A: + case 0x2C: + case 0x2D: + case 0x2E: + debug("Configuring idt8t49n222a for CPRI SerDes clks:" + " for srds_prctl:%x\n", serdes1_prtcl); + ret = select_i2c_ch_pca(I2C_CH_IDT); + if (!ret) { + ret = set_serdes_refclk(IDT_SERDES1_ADDRESS, 1, + SERDES_REFCLK_122_88, + SERDES_REFCLK_122_88, 0); + if (ret) { + printf("IDT8T49N222A configuration failed.\n"); + return ret; + } else + printf("IDT8T49N222A configured.\n"); + } else { + return ret; + } + select_i2c_ch_pca(I2C_CH_DEFAULT); + + /* Change SerDes1's Refclk1 to 125MHz for on board + * SGMIIs to work + */ + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl + (0, serdes1_prtcl, lane); + switch (lane_prtcl) { + case SGMII_FM1_DTSEC1: + case SGMII_FM1_DTSEC2: + case SGMII_FM1_DTSEC3: + case SGMII_FM1_DTSEC4: + case SGMII_FM1_DTSEC5: + case SGMII_FM1_DTSEC6: + flag_sgmii_prtcl++; + break; + default: + break; + } + } + + if (flag_sgmii_prtcl) + QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); + + /* Steps For SerDes PLLs reset and reconfiguration after + * changing SerDes's refclks + */ + for (i = 0; i < PLL_NUM; i++) { + debug("For PLL%d reset and reconfiguration after" + " changing refclks\n", i+1); + clrbits_be32(&srds_regs->bank[i].rstctl, + SRDS_RSTCTL_SDRST_B); + udelay(10); + clrbits_be32(&srds_regs->bank[i].rstctl, + (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B)); + udelay(10); + setbits_be32(&srds_regs->bank[i].rstctl, + SRDS_RSTCTL_RST); + setbits_be32(&srds_regs->bank[i].rstctl, + (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B + | SRDS_RSTCTL_SDRST_B)); + } + break; + default: + printf("WARNING:IDT8T49N222A configuration not" + " supported for:%x SerDes1 Protocol.\n", + serdes1_prtcl); + return -1; + } + + return 0; +} + int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; @@ -277,6 +364,16 @@ int board_early_init_r(void) #ifdef CONFIG_SYS_DPAA_QBMAN setup_portals(); #endif + /* SerDes1 refclks need to be set again, as default clks + * are not suitable for CPRI and onboard SGMIIs to work + * simultaneously. + * This function will set SerDes1's Refclk1 and refclk2 + * as per SerDes1 protocols + */ + if (config_serdes1_refclks()) + printf("SerDes1 Refclks couldn't set properly.\n"); + else + printf("SerDes1 Refclks have been set.\n"); /* Configure VSC3316 and VSC3308 crossbar switches */ if (configure_vsc3316_3308()) diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 19ca66e3d..dc4ef80fc 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -201,8 +201,6 @@ int board_eth_init(bd_t *bis) debug("Setting phy addresses for FM1_DTSEC5: %x and" "FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR); - /* Fixing Serdes clock by programming FPGA register */ - QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c index a4161ad64..c82fe0aab 100644 --- a/board/freescale/bsc9131rdb/ddr.c +++ b/board/freescale/bsc9131rdb/ddr.c @@ -87,7 +87,7 @@ phys_size_t fixed_sdram(void) } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index 457489416..a895e4e29 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -125,6 +125,27 @@ void board_config_serdes_mux(void) } } +/* Configure DSP DDR controller */ +void dsp_ddr_configure(void) +{ + /* + *There are separate DDR-controllers for DSP and PowerPC side DDR. + *copy the ddr controller settings from PowerPC side DDR controller + *to the DSP DDR controller as connected DDR memories are similar. + */ + ccsr_ddr_t __iomem *pa_ddr = + (ccsr_ddr_t __iomem *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ccsr_ddr_t temp_ddr; + ccsr_ddr_t __iomem *dsp_ddr = + (ccsr_ddr_t __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; + + memcpy(&temp_ddr, pa_ddr, sizeof(ccsr_ddr_t)); + temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS; + temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN; + memcpy(dsp_ddr, &temp_ddr, sizeof(ccsr_ddr_t)); + dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN; +} + int board_early_init_r(void) { #ifndef CONFIG_SYS_NO_FLASH @@ -153,6 +174,7 @@ int board_early_init_r(void) 0, flash_esel+1, BOOKE_PAGESZ_64M, 1); #endif board_config_serdes_mux(); + dsp_ddr_configure(); return 0; } diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c index 05bea8ad5..fdea19312 100644 --- a/board/freescale/bsc9132qds/ddr.c +++ b/board/freescale/bsc9132qds/ddr.c @@ -109,7 +109,7 @@ phys_size_t fixed_sdram(void) strmhz(buf, ddr_freq)); ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c index fed2edf44..e10de9adc 100644 --- a/board/freescale/bsc9132qds/law.c +++ b/board/freescale/bsc9132qds/law.c @@ -16,6 +16,14 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_FPGA_BASE_PHYS SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), #endif + SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M, + LAW_TRGT_IF_DSP_CCSR), + SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_32M, + LAW_TRGT_IF_OCN_DSP), + SET_LAW(CONFIG_SYS_FSL_DSP_M3_RAM_ADDR, LAW_SIZE_32K, + LAW_TRGT_IF_CLASS_DSP), + SET_LAW(CONFIG_SYS_FSL_DSP_DDR_ADDR, LAW_SIZE_1G, + LAW_TRGT_IF_CLASS_DSP) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c index 6d8235341..02655e9ba 100644 --- a/board/freescale/bsc9132qds/tlb.c +++ b/board/freescale/bsc9132qds/tlb.c @@ -41,6 +41,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), + /* CCSRBAR (DSP) */ + SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR, + CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR, + MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1), + #ifndef CONFIG_SPL_BUILD SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, diff --git a/board/freescale/c29xpcie/Makefile b/board/freescale/c29xpcie/Makefile new file mode 100644 index 000000000..ab8eb8f72 --- /dev/null +++ b/board/freescale/c29xpcie/Makefile @@ -0,0 +1,30 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += cpld.o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c new file mode 100644 index 000000000..48c4b308b --- /dev/null +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -0,0 +1,148 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <mmc.h> +#include <netdev.h> +#include <pci.h> +#include <asm/fsl_ifc.h> +#include <asm/fsl_pci.h> + +#include "cpld.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("Board: %sPCIe, ", cpu->name); + printf("CPLD Ver: 0x%02x\n", in_8(&cpld_data->cpldver)); + + return 0; +} + +int board_early_init_f(void) +{ + struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR; + + /* Clock configuration to access CPLD using IFC(GPCM) */ + setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned long flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_64M, 1); + + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif /* ifdef CONFIG_PCI */ + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[2]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + /* Register 1G MDIO bus */ + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + + return pci_eth_init(bis); +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void fdt_del_sec(void *blob, int offset) +{ + int nodeoff = 0; + + while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0", + CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET + + offset * 0x20000)) >= 0) { + fdt_del_node(blob, nodeoff); + offset++; + } +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + struct cpu_type *cpu; + + cpu = gd->arch.cpu; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + +#if defined(CONFIG_PCI) + FT_FSL_PCI_SETUP; +#endif + + fdt_fixup_memory(blob, (u64)base, (u64)size); + if (cpu->soc_ver == SVR_C291) + fdt_del_sec(blob, 1); + else if (cpu->soc_ver == SVR_C292) + fdt_del_sec(blob, 2); +} +#endif diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c new file mode 100644 index 000000000..5cbccff63 --- /dev/null +++ b/board/freescale/c29xpcie/cpld.c @@ -0,0 +1,131 @@ +/** + * Copyright 2013 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * Po Liu <Po.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the + * CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" +/** + * Set the boot bank to the alternate bank + */ +void cpld_set_altbank(u8 banksel) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + u8 reg11; + + reg11 = in_8(&cpld_data->flhcsr); + + switch (banksel) { + case 1: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK1); + break; + case 2: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK2); + break; + case 3: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK3); + break; + case 4: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK4); + break; + default: + printf("Invalid value! [1-4]\n"); + return; + } + + udelay(100); + do_reset(NULL, 0, 0, NULL); +} + +/** + * Set the boot bank to the default bank + */ +void cpld_set_defbank(void) +{ + cpld_set_altbank(4); +} + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("chipid1 = 0x%02x\n", in_8(&cpld_data->chipid1)); + printf("chipid2 = 0x%02x\n", in_8(&cpld_data->chipid2)); + printf("hwver = 0x%02x\n", in_8(&cpld_data->hwver)); + printf("cpldver = 0x%02x\n", in_8(&cpld_data->cpldver)); + printf("rstcon = 0x%02x\n", in_8(&cpld_data->rstcon)); + printf("flhcsr = 0x%02x\n", in_8(&cpld_data->flhcsr)); + printf("wdcsr = 0x%02x\n", in_8(&cpld_data->wdcsr)); + printf("wdkick = 0x%02x\n", in_8(&cpld_data->wdkick)); + printf("fancsr = 0x%02x\n", in_8(&cpld_data->fancsr)); + printf("ledcsr = 0x%02x\n", in_8(&cpld_data->ledcsr)); + printf("misc = 0x%02x\n", in_8(&cpld_data->misccsr)); + printf("bootor = 0x%02x\n", in_8(&cpld_data->bootor)); + printf("bootcfg1 = 0x%02x\n", in_8(&cpld_data->bootcfg1)); + printf("bootcfg2 = 0x%02x\n", in_8(&cpld_data->bootcfg2)); + printf("bootcfg3 = 0x%02x\n", in_8(&cpld_data->bootcfg3)); + printf("bootcfg4 = 0x%02x\n", in_8(&cpld_data->bootcfg4)); + putc('\n'); +} +#endif + +int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + unsigned char value; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (!strcmp(argv[2], "altbank") && argv[3]) { + value = (u8)simple_strtoul(argv[3], NULL, 16); + cpld_set_altbank(value); + } else if (!argv[2]) + cpld_set_defbank(); + else + cmd_usage(cmdtp); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, + "Reset the board using the CPLD sequencer", + "reset - hard reset to default bank 4\n" + "cpld_cmd reset altbank [bank]- reset to alternate bank\n" + " - [bank] bank value select 1-4\n" + " - bank 1 on the flash 0x0000000~0x0ffffff\n" + " - bank 2 on the flash 0x1000000~0x1ffffff\n" + " - bank 3 on the flash 0x2000000~0x2ffffff\n" + " - bank 4 on the flash 0x3000000~0x3ffffff\n" +#ifdef DEBUG + "cpld_cmd dump - display the CPLD registers\n" +#endif + ); diff --git a/board/freescale/c29xpcie/cpld.h b/board/freescale/c29xpcie/cpld.h new file mode 100644 index 000000000..20862a3c0 --- /dev/null +++ b/board/freescale/c29xpcie/cpld.h @@ -0,0 +1,40 @@ +/** + * Copyright 2013 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.Hu@freescale.com> + * Po Liu <Po.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the ngPIXIS, a board-specific FPGA used on + * some Freescale reference boards. + */ + +/* + * CPLD register set. Feel free to add board-specific #ifdefs where necessary. + */ +struct cpld_data { + u8 chipid1; /* 0x0 - CPLD Chip ID1 Register */ + u8 chipid2; /* 0x1 - CPLD Chip ID2 Register */ + u8 hwver; /* 0x2 - Hardware Version Register */ + u8 cpldver; /* 0x3 - Software Version Register */ + u8 res[12]; + u8 rstcon; /* 0x10 - Reset control register */ + u8 flhcsr; /* 0x11 - Flash control and status Register */ + u8 wdcsr; /* 0x12 - Watchdog control and status Register */ + u8 wdkick; /* 0x13 - Watchdog kick Register */ + u8 fancsr; /* 0x14 - Fan control and status Register */ + u8 ledcsr; /* 0x15 - LED control and status Register */ + u8 misccsr; /* 0x16 - Misc control and status Register */ + u8 bootor; /* 0x17 - Boot configure override Register */ + u8 bootcfg1; /* 0x18 - Boot configure 1 Register */ + u8 bootcfg2; /* 0x19 - Boot configure 2 Register */ + u8 bootcfg3; /* 0x1a - Boot configure 3 Register */ + u8 bootcfg4; /* 0x1b - Boot configure 4 Register */ +}; + +#define CPLD_BANKSEL_EN 0x02 +#define CPLD_BANKSEL_MASK 0x3f +#define CPLD_SELECT_BANK1 0xc0 +#define CPLD_SELECT_BANK2 0x80 +#define CPLD_SELECT_BANK3 0x40 +#define CPLD_SELECT_BANK4 0x00 diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c new file mode 100644 index 000000000..b017cfd96 --- /dev/null +++ b/board/freescale/c29xpcie/ddr.c @@ -0,0 +1,86 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +/* + * Micron MT41J128M16HA-15E + * */ +dimm_params_t ddr_raw_timing = { + .n_ranks = 1, + .rank_density = 536870912u, + .capacity = 536870912u, + .primary_sdram_width = 32, + .ec_sdram_width = 8, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 14, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 2, + .burst_lengths_bitmask = 0x0c, + + .tCKmin_X_ps = 1650, + .caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */ + .tAA_ps = 14050, + .tWR_ps = 15000, + .tRCD_ps = 13500, + .tRRD_ps = 75000, + .tRP_ps = 13500, + .tRAS_ps = 40000, + .tRC_ps = 49500, + .tRFC_ps = 160000, + .tWTR_ps = 75000, + .tRTP_ps = 75000, + .refresh_rate_ps = 7800000, + .tFAW_ps = 30000, +}; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "Fixed DDR on board"; + + if ((controller_number == 0) && (dimm_number == 0)) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + int i; + popts->clk_adjust = 2; + popts->cpo_override = 0x1f; + popts->write_data_delay = 4; + popts->half_strength_driver_enable = 1; + popts->bstopre = 0x3cf; + popts->quad_rank_present = 1; + popts->rtt_override = 1; + popts->rtt_override_value = 1; + popts->dynamic_power = 1; + /* Write leveling override */ + popts->wrlvl_en = 1; + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + popts->wrlvl_start = 0x4; + popts->trwt_override = 1; + popts->trwt = 0; + + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; + popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; + } +} diff --git a/board/freescale/c29xpcie/law.c b/board/freescale/c29xpcie/law.c new file mode 100644 index 000000000..cd8fc2105 --- /dev/null +++ b/board/freescale/c29xpcie/law.c @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_16K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, LAW_SIZE_512K, + LAW_TRGT_IF_PLATFORM_SRAM), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c new file mode 100644 index 000000000..ddd1ef80b --- /dev/null +++ b/board/freescale/c29xpcie/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 1, BOOKE_PAGESZ_64M, 1), + +#ifdef CONFIG_PCI + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256K, 1), +#endif + + SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_4K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_16K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE, + CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE + 0x40000, + CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_256K, 1), + +#ifdef CONFIG_SYS_RAMBOOT + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, + CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_256M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index d451f6ff0..457d1adbd 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -54,6 +54,7 @@ COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o COBJS-$(CONFIG_P5040DS) += ics307_clk.o COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o +COBJS-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.c b/board/freescale/common/idt8t49n222a_serdes_clk.c new file mode 100644 index 000000000..d34716227 --- /dev/null +++ b/board/freescale/common/idt8t49n222a_serdes_clk.c @@ -0,0 +1,207 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Shaveta Leekha <shaveta@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "idt8t49n222a_serdes_clk.h" + +#define DEVICE_ID_REG 0x00 + +static int check_pll_status(u8 idt_addr) +{ + u8 val = 0; + int ret; + + ret = i2c_read(idt_addr, 0x17, 1, &val, 1); + if (ret < 0) { + printf("IDT:0x%x could not read status register from device.\n", + idt_addr); + return ret; + } + + if (val & 0x04) { + debug("idt8t49n222a PLL is LOCKED: %x\n", val); + } else { + printf("idt8t49n222a PLL is not LOCKED: %x\n", val); + return -1; + } + + return 0; +} + +int set_serdes_refclk(u8 idt_addr, u8 serdes_num, + enum serdes_refclk refclk1, + enum serdes_refclk refclk2, u8 feedback) +{ + u8 dev_id = 0; + int i, ret; + + debug("IDT:Configuring idt8t49n222a device at I2C address: 0x%2x\n", + idt_addr); + + ret = i2c_read(idt_addr, DEVICE_ID_REG, 1, &dev_id, 1); + if (ret < 0) { + debug("IDT:0x%x could not read DEV_ID from device.\n", + idt_addr); + return ret; + } + + if ((dev_id != 0x00) && (dev_id != 0x24) && (dev_id != 0x2a)) { + debug("IDT: device at address 0x%x is not idt8t49n222a.\n", + idt_addr); + } + + if (serdes_num != 1 && serdes_num != 2) { + debug("serdes_num should be 1 for SerDes1 and" + " 2 for SerDes2.\n"); + return -1; + } + + if ((refclk1 == SERDES_REFCLK_122_88 && refclk2 != SERDES_REFCLK_122_88) + || (refclk1 != SERDES_REFCLK_122_88 + && refclk2 == SERDES_REFCLK_122_88)) { + debug("Only one refclk at 122.88MHz is not supported." + " Please set both refclk1 & refclk2 to 122.88MHz" + " or both not to 122.88MHz.\n"); + return -1; + } + + if (refclk1 != SERDES_REFCLK_100 && refclk1 != SERDES_REFCLK_122_88 + && refclk1 != SERDES_REFCLK_125 + && refclk1 != SERDES_REFCLK_156_25) { + debug("refclk1 should be 100MHZ, 122.88MHz, 125MHz" + " or 156.25MHz.\n"); + return -1; + } + + if (refclk2 != SERDES_REFCLK_100 && refclk2 != SERDES_REFCLK_122_88 + && refclk2 != SERDES_REFCLK_125 + && refclk2 != SERDES_REFCLK_156_25) { + debug("refclk2 should be 100MHZ, 122.88MHz, 125MHz" + " or 156.25MHz.\n"); + return -1; + } + + if (feedback != 0 && feedback != 1) { + debug("valid values for feedback are 0(default) or 1.\n"); + return -1; + } + + /* Configuring IDT for output refclks as + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + */ + if (refclk1 == SERDES_REFCLK_122_88 && + refclk2 == SERDES_REFCLK_122_88) { + printf("Setting refclk1:122.88 and refclk2:122.88\n"); + for (i = 0; i < NUM_IDT_REGS; i++) + i2c_reg_write(idt_addr, idt_conf_122_88[i][0], + idt_conf_122_88[i][1]); + + if (feedback) { + for (i = 0; i < NUM_IDT_REGS_FEEDBACK; i++) + i2c_reg_write(idt_addr, + idt_conf_122_88_feedback[i][0], + idt_conf_122_88_feedback[i][1]); + } + } + + if (refclk1 != SERDES_REFCLK_122_88 && + refclk2 != SERDES_REFCLK_122_88) { + for (i = 0; i < NUM_IDT_REGS; i++) + i2c_reg_write(idt_addr, idt_conf_not_122_88[i][0], + idt_conf_not_122_88[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 100MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_100 && refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:100 and refclk2:125\n"); + i2c_reg_write(idt_addr, 0x11, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:125 and refclk2:125\n"); + i2c_reg_write(idt_addr, 0x10, 0x10); + i2c_reg_write(idt_addr, 0x11, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 100MHz + */ + if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_100) { + printf("Setting refclk1:125 and refclk2:100\n"); + i2c_reg_write(idt_addr, 0x10, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:156.25 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25[i][0], + idt_conf_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 100MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_100 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:100 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_100_156_25[i][0], + idt_conf_100_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_125 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:125 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_125_156_25[i][0], + idt_conf_125_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 100MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_100) { + printf("Setting refclk1:156.25 and refclk2:100\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25_100[i][0], + idt_conf_156_25_100[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:156.25 and refclk2:125\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25_125[i][0], + idt_conf_156_25_125[i][1]); + } + + /* waiting for maximum of 1 second if PLL doesn'r get locked + * initially. then check the status again. + */ + if (check_pll_status(idt_addr)) { + mdelay(1000); + if (check_pll_status(idt_addr)) + return -1; + } + + return 0; +} diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.h b/board/freescale/common/idt8t49n222a_serdes_clk.h new file mode 100644 index 000000000..787bdd9ca --- /dev/null +++ b/board/freescale/common/idt8t49n222a_serdes_clk.h @@ -0,0 +1,107 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Shaveta Leekha <shaveta@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IDT8T49N222A_SERDES_CLK_H_ +#define __IDT8T49N222A_SERDES_CLK_H_ 1 + +#include <common.h> +#include <i2c.h> +#include "qixis.h" +#include "../b4860qds/b4860qds_qixis.h" +#include <errno.h> + +#define NUM_IDT_REGS 23 +#define NUM_IDT_REGS_FEEDBACK 12 +#define NUM_IDT_REGS_156_25 11 + +/* CLK */ +enum serdes_refclk { + SERDES_REFCLK_100, /* refclk 100Mhz */ + SERDES_REFCLK_122_88, /* refclk 122.88Mhz */ + SERDES_REFCLK_125, /* refclk 125Mhz */ + SERDES_REFCLK_156_25, /* refclk 156.25Mhz */ + SERDES_REFCLK_NONE = -1, +}; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + */ +static const u8 idt_conf_122_88[23][2] = { {0x00, 0x3C}, {0x01, 0x00}, + {0x02, 0x9F}, {0x03, 0x00}, {0x04, 0x0B}, {0x05, 0x00}, + {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, + {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, + {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x12}, {0x11, 0x12}, + {0x12, 0xB9}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, + {0x16, 0xA0} }; + + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 not equal to 122.88MHz Refclk2 not equal to 122.88MHz + */ +static const u8 idt_conf_not_122_88[23][2] = { {0x00, 0x00}, {0x01, 0x00}, + {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x0A}, {0x05, 0x00}, + {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, + {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, + {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x14}, {0x11, 0x14}, + {0x12, 0x35}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, + {0x16, 0xA0} }; + +/* Reconfiguration values for some of IDT registers for + * Output Refclks: + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + * and with feedback as 1 + */ +static const u8 idt_conf_122_88_feedback[12][2] = { {0x00, 0x50}, {0x02, 0xD7}, + {0x04, 0x89}, {0x06, 0xC3}, {0x08, 0xC0}, {0x0A, 0x07}, + {0x0C, 0x80}, {0x10, 0x10}, {0x11, 0x10}, {0x12, 0x1B}, + {0x14, 0x00}, {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 100MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_100_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x19}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 125MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_125_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x14}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 100MHz + */ +static const u8 idt_conf_156_25_100[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x19}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 125MHz + */ +static const u8 idt_conf_156_25_125[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x14}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +int set_serdes_refclk(u8 idt_addr, u8 serdes_num, + enum serdes_refclk refclk1, + enum serdes_refclk refclk2, u8 feedback); + +#endif /*__IDT8T49N222A_SERDES_CLK_H_ */ diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 40ce6b082..a49e3006d 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -107,6 +107,26 @@ const char *byte_to_binary_mask(u8 val, u8 mask, char *buf) return buf; } +#ifdef QIXIS_RST_FORCE_MEM +void board_assert_mem_reset(void) +{ + u8 rst; + + rst = QIXIS_READ(rst_frc[0]); + if (!(rst & QIXIS_RST_FORCE_MEM)) + QIXIS_WRITE(rst_frc[0], rst | QIXIS_RST_FORCE_MEM); +} + +void board_deassert_mem_reset(void) +{ + u8 rst; + + rst = QIXIS_READ(rst_frc[0]); + if (rst & QIXIS_RST_FORCE_MEM) + QIXIS_WRITE(rst_frc[0], rst & ~QIXIS_RST_FORCE_MEM); +} +#endif + void qixis_reset(void) { QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index fffb0c817..60e2100af 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -27,8 +27,10 @@ int checkboard (void) { u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) || \ + defined(CONFIG_P5040DS) unsigned int i; +#endif static const char * const freq[] = {"100", "125", "156.25", "212.5" }; printf("Board: %sDS, ", cpu->name); @@ -47,19 +49,6 @@ int checkboard (void) else printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index da284cde9..517e87ff4 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -56,14 +56,14 @@ phys_size_t fixed_sdram(void) ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); #if (CONFIG_NUM_DDR_CONTROLLERS == 2) memcpy(&ddr_cfg_regs, fixed_ddr_parm_1[i].ddr_settings, sizeof(ddr_cfg_regs)); ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1, 0); #endif /* diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index aa8badab4..681f052e4 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -139,7 +139,7 @@ phys_size_t fixed_sdram(void) } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 0038077fc..5bee22e63 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -220,7 +220,7 @@ phys_size_t fixed_sdram (void) ddr_cfg_regs.cs[0].bnds = 0x0000001F; } - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1); return ddr_size; diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README index 44377317d..f4cc43fbf 100644 --- a/board/freescale/p1_p2_rdb_pc/README +++ b/board/freescale/p1_p2_rdb_pc/README @@ -3,6 +3,7 @@ Overview P1_P2_RDB_PC represents a set of boards including P1020MSBG-PC P1020RDB-PC + P1020RDB-PD P1020UTM-PC P1021RDB-PC P1024RDB diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index 9355536b3..5c51845dd 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -80,7 +80,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tFAW_ps = 30000, }; -#elif defined(CONFIG_P1020MBG) +#elif (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) /* Micron MT41J512M8_187E */ dimm_params_t ddr_raw_timing = { .n_ranks = 2, @@ -111,7 +111,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tFAW_ps = 37500, }; -#elif defined(CONFIG_P1020RDB) +#elif defined(CONFIG_P1020RDB_PC) /* * Samsung K4B2G0846C-HCF8 * The following timing are for "downshift" @@ -251,7 +251,7 @@ phys_size_t fixed_sdram(void) ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index 93896dc71..d4561c764 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -94,7 +94,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_1G, 1), -#ifdef CONFIG_P1020MBG +#if defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD) /* 2G DDR on P1020MBG, map the second 1G */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, diff --git a/board/freescale/p1_twr/Makefile b/board/freescale/p1_twr/Makefile new file mode 100644 index 000000000..915b9bc89 --- /dev/null +++ b/board/freescale/p1_twr/Makefile @@ -0,0 +1,35 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c new file mode 100644 index 000000000..697c0dd37 --- /dev/null +++ b/board/freescale/p1_twr/ddr.c @@ -0,0 +1,69 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/processor.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/io.h> +#include <asm/fsl_law.h> + +/* Fixed sdram init -- doesn't use serial presence detect. */ +phys_size_t fixed_sdram(void) +{ + sys_info_t sysinfo; + char buf[32]; + size_t ddr_size; + fsl_ddr_cfg_regs_t ddr_cfg_regs = { + .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, + .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, + .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, +#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 + .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, + .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, + .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2, +#endif + .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3, + .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0, + .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1, + .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2, + .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, + .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, + .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1, + .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2, + .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, + .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL, + .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT, + .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL, + .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, + .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, + .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, + .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, + .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, + .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, + .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, + .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, + .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 + }; + + get_sys_info(&sysinfo); + printf("Configuring DDR for %s MT/s data rate\n", + strmhz(buf, sysinfo.freqDDRBus)); + + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); + + if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, + ddr_size, LAW_TRGT_IF_DDR_1) < 0) { + printf("ERROR setting Local Access Windows for DDR\n"); + return 0; + }; + + return ddr_size; +} diff --git a/board/freescale/p1_twr/law.c b/board/freescale/p1_twr/law.c new file mode 100644 index 000000000..e79d8a4c1 --- /dev/null +++ b/board/freescale/p1_twr/law.c @@ -0,0 +1,16 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_SSD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC) +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c new file mode 100644 index 000000000..ea8db6fc0 --- /dev/null +++ b/board/freescale/p1_twr/p1_twr.c @@ -0,0 +1,281 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <hwconfig.h> +#include <pci.h> +#include <i2c.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/io.h> +#include <asm/fsl_law.h> +#include <asm/fsl_lbc.h> +#include <asm/mp.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <ioports.h> +#include <asm/fsl_serdes.h> +#include <netdev.h> + +#define SYSCLK_64 64000000 +#define SYSCLK_66 66666666 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + par_io_t *par_io = (par_io_t *) &(gur->qe_par_io); + unsigned int cpdat_val = 0; + + /* Set-up up pin muxing based on board switch settings */ + cpdat_val = par_io[1].cpdat; + + /* Check switch setting for SYSCLK select (PB3) */ + if (cpdat_val & 0x10000000) + return SYSCLK_64; + else + return SYSCLK_66; + + return 0; +} + +#ifdef CONFIG_QE + +#define PCA_IOPORT_I2C_ADDR 0x23 +#define PCA_IOPORT_OUTPUT_CMD 0x2 +#define PCA_IOPORT_CFG_CMD 0x6 + +const qe_iop_conf_t qe_iop_conf_tab[] = { + +#ifdef CONFIG_TWR_P1025 + /* GPIO */ + {1, 0, 1, 0, 0}, + {1, 18, 1, 0, 0}, + + /* GPIO for switch options */ + {1, 2, 2, 0, 0}, /* PROFIBUS_MODE_SEL */ + {1, 3, 2, 0, 0}, /* SYS_CLK_SELECT */ + {1, 29, 2, 0, 0}, /* LOCALBUS_QE_MUXSEL */ + {1, 30, 2, 0, 0}, /* ETH_TDM_SEL */ + + /* QE_MUX_MDC */ + {1, 19, 1, 0, 1}, /* QE_MUX_MDC */ + + /* QE_MUX_MDIO */ + {1, 20, 3, 0, 1}, /* QE_MUX_MDIO */ + + /* UCC_1_MII */ + {0, 23, 2, 0, 2}, /* CLK12 */ + {0, 24, 2, 0, 1}, /* CLK9 */ + {0, 7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0 */ + {0, 9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1 */ + {0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2 */ + {0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ + {0, 6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0 */ + {0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1 */ + {0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ + {0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ + {0, 5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ + {0, 13, 1, 0, 2}, /* ENET1_TX_ER */ + {0, 4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B */ + {0, 8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B */ + {0, 17, 2, 0, 2}, /* ENET1_CRS */ + {0, 16, 2, 0, 2}, /* ENET1_COL */ + + /* UCC_5_RMII */ + {1, 11, 2, 0, 1}, /* CLK13 */ + {1, 7, 1, 0, 2}, /* ENET5_TXD0_SER5_TXD0 */ + {1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1 */ + {1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0 */ + {1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1 */ + {1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B */ + {1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B */ + {1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B */ + + /* TDMA - clock option is configured in OS based on board setting */ + {1, 23, 2, 0, 2}, /* TDMA_TXD */ + {1, 25, 2, 0, 2}, /* TDMA_RXD */ + {1, 26, 1, 0, 2}, /* TDMA_SYNC */ +#endif + + {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ +}; +#endif + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP)); + + /* SDHC_DAT[4:7] not exposed to pins (use as SPI) */ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); + + return 0; +} + +int checkboard(void) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u8 boot_status; + + printf("Board: %s\n", CONFIG_BOARDNAME); + + boot_status = ((gur->porbmsr) >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf; + puts("rom_loc: "); + if (boot_status == PORBMSR_ROMLOC_NOR) + puts("nor flash"); + else if (boot_status == PORBMSR_ROMLOC_SDHC) + puts("sd"); + else + puts("unknown"); + puts("\n"); + + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ + 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */ + return 0; +} + +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + ccsr_gur_t *gur __attribute__((unused)) = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (is_serdes_configured(SGMII_TSEC2)) { + printf("eTSEC2 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + +#if defined(CONFIG_UEC_ETH) + /* QE0 and QE3 need to be exposed for UCC1 + * and UCC5 Eth mode (in PMUXCR register). + * Currently QE/LBC muxed pins assumed to be + * LBC for U-Boot and PMUXCR updated by OS if required */ + + uec_standard_init(bis); +#endif + + return pci_eth_init(bis); +} + +#if defined(CONFIG_QE) +static void fdt_board_fixup_qe_pins(void *blob) +{ + int node; + + if (!hwconfig("qe")) { + /* For QE and eLBC pins multiplexing, + * When don't use QE function, remove + * qe node from dt blob. + */ + node = fdt_path_offset(blob, "/qe"); + if (node >= 0) + fdt_del_node(blob, node); + } else { + /* For TWR Peripheral Modules - TWR-SER2 + * board only can support Signal Port MII, + * so delete one UEC node when use MII port. + */ + if (hwconfig("mii")) + node = fdt_path_offset(blob, "/qe/ucc@2400"); + else + node = fdt_path_offset(blob, "/qe/ucc@2000"); + if (node >= 0) + fdt_del_node(blob, node); + } + + return; +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + FT_FSL_PCI_SETUP; + +#ifdef CONFIG_QE + do_fixup_by_compat(blob, "fsl,qe", "status", "okay", + sizeof("okay"), 0); +#endif +#if defined(CONFIG_TWR_P1025) + fdt_board_fixup_qe_pins(blob); +#endif + fdt_fixup_dr_usb(blob, bd); +} +#endif diff --git a/board/freescale/p1_twr/tlb.c b/board/freescale/p1_twr/tlb.c new file mode 100644 index 000000000..308335c97 --- /dev/null +++ b/board/freescale/p1_twr/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + +#ifndef CONFIG_SPL_BUILD + /* W**G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_64M, 1), + + /* W**G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_SSD_BASE, CONFIG_SYS_SSD_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_1M, 1), + +#ifdef CONFIG_PCI + /* *I*G* - PCI memory 1.5G */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI I/O effective: 192K */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), +#endif + +#endif + +#ifdef CONFIG_SYS_RAMBOOT + /* *I*G - eSDHC boot */ + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_1G, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 08d10bc9c..60694a672 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -28,7 +28,6 @@ int checkboard(void) { u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; printf("Board: %sRDB, ", cpu->name); @@ -39,20 +38,6 @@ int checkboard(void) printf("vBank: %d\n", sw & 0x1); /* - * Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile index 85df06690..a2167b377 100644 --- a/board/freescale/t4qds/Makefile +++ b/board/freescale/t4qds/Makefile @@ -8,7 +8,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS-y += $(BOARD).o +COBJS-$(CONFIG_T4240QDS) += t4240qds.o +COBJS-$(CONFIG_T4240EMU) += t4240emu.o COBJS-y += ddr.o COBJS-$(CONFIG_T4240QDS)+= eth.o COBJS-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 058d62511..26ac2a54d 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -13,81 +13,10 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include "ddr.h" DECLARE_GLOBAL_DATA_PTR; -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 rank_gb; - u32 clk_adjust; - u32 wrlvl_start; - u32 wrlvl_ctl_2; - u32 wrlvl_ctl_3; - u32 cpo; - u32 write_data_delay; - u32 force_2T; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {} -}; - -/* - * The three slots have slightly different timing. The center values are good - * for all slots. We use identical speed tables for them. In future use, if - * DIMMs require separated tables, make more entries as needed. - */ -static const struct board_specific_parameters *udimms[] = { - udimm0, -}; - -static const struct board_specific_parameters rdimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {} -}; - -/* - * The three slots have slightly different timing. See comments above. - */ -static const struct board_specific_parameters *rdimms[] = { - rdimm0, -}; - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h new file mode 100644 index 000000000..d0a0951af --- /dev/null +++ b/board/freescale/t4qds/ddr.h @@ -0,0 +1,108 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +#ifdef CONFIG_T4240QDS +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {} +}; + +#else /* CONFIG_T4240EMU */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, + {2, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {} +}; +#endif /* CONFIG_T4240EMU */ + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c index 63549df2a..367783bfe 100644 --- a/board/freescale/t4qds/law.c +++ b/board/freescale/t4qds/law.c @@ -19,7 +19,9 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_QMAN_MEM_PHYS SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif +#ifdef QIXIS_BASE_PHYS SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif #ifdef CONFIG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c new file mode 100644 index 000000000..7a610367d --- /dev/null +++ b/board/freescale/t4qds/t4240emu.c @@ -0,0 +1,80 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + + printf("Board: %sEMU\n", cpu->name); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); +} diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4240qds.c index aa6a217f3..7ee0f5478 100644 --- a/board/freescale/t4qds/t4qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -43,12 +43,11 @@ int checkboard(void) char buf[64]; u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; printf("Board: %sQDS, ", cpu->name); printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", - QIXIS_READ(id), QIXIS_READ(arch)); + QIXIS_READ(id), QIXIS_READ(arch)); sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -63,24 +62,11 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); printf("FPGA: v%d (%s), build %d", - (int)QIXIS_READ(scver), qixis_read_tag(buf), - (int)qixis_read_minor()); + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could @@ -92,7 +78,7 @@ int checkboard(void) puts("SERDES Reference Clocks: "); sw = QIXIS_READ(brdcfg[2]); for (i = 0; i < MAX_SERDES; i++) { - static const char *freq[] = { + static const char * const freq[] = { "100", "125", "156.25", "161.1328125"}; unsigned int clock = (sw >> (6 - 2 * i)) & 3; @@ -430,7 +416,7 @@ int config_backside_crossbar_mux(void) break; default: printf("WARNING: unsupported for SerDes3 Protocol %d\n", - srds_prtcl_s3); + srds_prtcl_s3); return -1; } @@ -470,7 +456,7 @@ int config_backside_crossbar_mux(void) break; default: printf("WARNING: unsupported for SerDes4 Protocol %d\n", - srds_prtcl_s4); + srds_prtcl_s4); return -1; } @@ -495,8 +481,8 @@ int board_early_init_r(void) disable_tlb(flash_esel); set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); set_liodns(); #ifdef CONFIG_SYS_DPAA_QBMAN @@ -634,9 +620,8 @@ int misc_init_r(void) u32 pllcr0 = srds_regs->bank[i].pllcr0; u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; if (expected != actual[i]) { - printf("Warning: SERDES%u expects reference clock" - " %sMHz, but actual is %sMHz\n", i + 1, - serdes_clock_to_string(expected), + printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n", + i + 1, serdes_clock_to_string(expected), serdes_clock_to_string(actual[i])); } } @@ -795,42 +780,44 @@ void qixis_dump_switch(void) } sw[0] = dutcfg[0]; - sw[1] = (dutcfg[1] << 0x07) | \ - ((dutcfg[12] & 0xC0) >> 1) | \ - ((dutcfg[11] & 0xE0) >> 3) | \ - ((dutcfg[6] & 0x80) >> 6) | \ + sw[1] = (dutcfg[1] << 0x07) | + ((dutcfg[12] & 0xC0) >> 1) | + ((dutcfg[11] & 0xE0) >> 3) | + ((dutcfg[6] & 0x80) >> 6) | ((dutcfg[1] & 0x80) >> 7); - sw[2] = ((brdcfg[1] & 0x0f) << 4) | \ - ((brdcfg[1] & 0x30) >> 2) | \ - ((brdcfg[1] & 0x40) >> 5) | \ + sw[2] = ((brdcfg[1] & 0x0f) << 4) | + ((brdcfg[1] & 0x30) >> 2) | + ((brdcfg[1] & 0x40) >> 5) | ((brdcfg[1] & 0x80) >> 7); sw[3] = brdcfg[2]; - sw[4] = ((dutcfg[2] & 0x01) << 7) | \ - ((dutcfg[2] & 0x06) << 4) | \ - ((~QIXIS_READ(present)) & 0x10) | \ - ((brdcfg[3] & 0x80) >> 4) | \ - ((brdcfg[3] & 0x01) << 2) | \ - ((brdcfg[6] == 0x62) ? 3 : \ - ((brdcfg[6] == 0x5a) ? 2 : \ + sw[4] = ((dutcfg[2] & 0x01) << 7) | + ((dutcfg[2] & 0x06) << 4) | + ((~QIXIS_READ(present)) & 0x10) | + ((brdcfg[3] & 0x80) >> 4) | + ((brdcfg[3] & 0x01) << 2) | + ((brdcfg[6] == 0x62) ? 3 : + ((brdcfg[6] == 0x5a) ? 2 : ((brdcfg[6] == 0x5e) ? 1 : 0))); - sw[5] = ((brdcfg[0] & 0x0f) << 4) | \ - ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \ + sw[5] = ((brdcfg[0] & 0x0f) << 4) | + ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | ((brdcfg[0] & 0x40) >> 5); sw[6] = (brdcfg[11] & 0x20) | ((brdcfg[5] & 0x02) << 3); - sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \ + sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | ((brdcfg[5] & 0x10) << 2); - sw[8] = ((brdcfg[12] & 0x08) << 4) | \ + sw[8] = ((brdcfg[12] & 0x08) << 4) | ((brdcfg[12] & 0x03) << 5); puts("DIP switch (reverse-engineering)\n"); for (i = 0; i < 9; i++) { printf("SW%d = 0b%s (0x%02x)\n", - i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); + i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); } } -static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_vdd_adjust(cmd_tbl_t *cmdtp, + int flag, int argc, + char * const argv[]) { ulong override; diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c index b27356a5f..b701e7520 100644 --- a/board/freescale/t4qds/tlb.c +++ b/board/freescale/t4qds/tlb.c @@ -120,9 +120,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif +#ifdef QIXIS_BASE_PHYS SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 17, BOOKE_PAGESZ_4K, 1), +#endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE /* * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for diff --git a/boards.cfg b/boards.cfg index 944ed4cf0..d6e29fa49 100644 --- a/boards.cfg +++ b/boards.cfg @@ -775,6 +775,8 @@ MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freesca MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND +C29XPCIE powerpc mpc85xx c29xpcie freescale - C29XPCIE:C29XPCIE,36BIT +C29XPCIE_SPIFLASH powerpc mpc85xx c29xpcie freescale - C29XPCIE:C29XPCIE,36BIT,SPIFLASH P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT P1010RDB_36BIT_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT @@ -805,16 +807,20 @@ P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freesca P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND -P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB -P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT -P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,NAND -P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SDCARD -P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SPIFLASH -P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND -P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD -P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH +P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC +P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT +P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,NAND +P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,SDCARD +P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,SPIFLASH +P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,NAND +P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,SDCARD +P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,SPIFLASH P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH +P1020RDB-PD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD +P1020RDB-PD_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,NAND +P1020RDB-PD_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,SDCARD +P1020RDB-PD_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,SPIFLASH P1020UTM-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM P1020UTM-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT P1020UTM-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT,SDCARD @@ -848,6 +854,7 @@ P1025RDB_36BIT powerpc mpc85xx p1_p2_rdb_pc freesca P1025RDB_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,NAND P1025RDB_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SDCARD P1025RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SPIFLASH +TWR-P1025 powerpc mpc85xx p1_twr freescale - p1_twr:TWR_P1025 P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB P2010RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT P2010RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SDCARD @@ -924,6 +931,7 @@ stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240 +T4240EMU powerpc mpc85xx t4qds freescale - T4240EMU:PPC_T4240 T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 T4240QDS_SRIO_PCIE_BOOT powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 diff --git a/common/lcd.c b/common/lcd.c index 8d5c63c29..990650c7e 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -51,7 +51,6 @@ /* ** FONT DATA */ /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> /************************************************************************/ /* ** LOGO DATA */ diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index 96d4c9bb1..22defcd7d 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -545,6 +545,28 @@ int mxs_dma_go(int chan) } /* + * Execute a continuously running circular DMA descriptor. + * NOTE: This is not intended for general use, but rather + * for the LCD driver in Smart-LCD mode. It allows + * continuous triggering of the RUN bit there. + */ +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc) +{ + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; + + mxs_dma_flush_desc(pdesc); + + mxs_dma_enable_irq(chan, 1); + + writel(mxs_dma_cmd_address(pdesc), + &apbh_regs->ch[chan].hw_apbh_ch_nxtcmdar); + writel(1, &apbh_regs->ch[chan].hw_apbh_ch_sema); + writel(1 << (chan + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_ctrl0_clr); +} + +/* * Initialize the DMA hardware */ void mxs_dma_init(void) diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 4bc8f35a1..bca20b333 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -396,6 +396,8 @@ int fm_init_common(int index, struct ccsr_fman *reg) } #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE) void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; +#else + void *addr = NULL; #endif /* Upload the Fman microcode if it's present */ diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 17ca961ab..d55db1a0b 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -28,12 +28,6 @@ DECLARE_GLOBAL_DATA_PTR; #include <asm/io.h> #include <asm/fsl_pci.h> -/* Freescale-specific PCI config registers */ -#define FSL_PCI_PBFR 0x44 -#define FSL_PCIE_CAP_ID 0x4c -#define FSL_PCIE_CFG_RDY 0x4b0 -#define FSL_PROG_IF_AGENT 0x1 - #ifndef CONFIG_SYS_PCI_MEMORY_BUS #define CONFIG_SYS_PCI_MEMORY_BUS 0 #endif @@ -424,6 +418,15 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) udelay(1); #endif if (pcie_cap == PCI_CAP_ID_EXP) { + if (block_rev >= PEX_IP_BLK_REV_3_0) { +#define PEX_CSR0_LTSSM_MASK 0xFC +#define PEX_CSR0_LTSSM_SHIFT 2 + ltssm = (in_be32(&pci->pex_csr0) + & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT; + enabled = (ltssm == 0x11) ? 1 : 0; + } else { + /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */ + /* enabled = ltssm >= PCI_LTSSM_L0; */ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); enabled = ltssm >= PCI_LTSSM_L0; @@ -456,6 +459,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) PCI_BASE_ADDRESS_0, pcicsrbar); } #endif + } #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 if (enabled == 0) { @@ -564,6 +568,10 @@ int fsl_is_pci_agent(struct pci_controller *hose) u8 prog_if; pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + /* Programming Interface (PCI_CLASS_PROG) + * 0 == pci host or pcie root-complex, + * 1 == pci agent or pcie end-point + */ return (prog_if == FSL_PROG_IF_AGENT); } } diff --git a/drivers/video/Makefile b/drivers/video/Makefile index f1fb26c18..6dee1e930 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -19,6 +19,7 @@ COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o +COBJS-$(CONFIG_L5F31188) += l5f31188.o COBJS-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o COBJS-$(CONFIG_PXA_LCD) += pxa_lcd.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 96ef8f9c2..fd2885573 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -197,7 +197,6 @@ #include <linux/types.h> #include <stdio_dev.h> #include <video_font.h> -#include <video_font_data.h> #if defined(CONFIG_CMD_DATE) #include <rtc.h> @@ -431,6 +430,16 @@ static const int video_font_draw_table32[16][4] = { {0x00ffffff, 0x00ffffff, 0x00ffffff, 0x00ffffff} }; +/* + * Implement a weak default function for boards that optionally + * need to skip the cfb initialization. + */ +__weak int board_cfb_skip(void) +{ + /* As default, don't skip cfb init */ + return 0; +} + static void video_drawchars(int xx, int yy, unsigned char *s, int count) { u8 *cdat, *dest, *dest0; @@ -452,6 +461,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[0] = (video_font_draw_table8[bits >> 4] & eorx) ^ bgx; + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[1] = (video_font_draw_table8[bits & 15] & eorx) ^ bgx; @@ -477,6 +490,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) SHORTSWAP32((video_font_draw_table15 [bits >> 4 & 3] & eorx) ^ bgx); + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[2] = SHORTSWAP32((video_font_draw_table15 [bits >> 2 & 3] & eorx) ^ @@ -507,6 +524,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) SHORTSWAP32((video_font_draw_table16 [bits >> 4 & 3] & eorx) ^ bgx); + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[2] = SHORTSWAP32((video_font_draw_table16 [bits >> 2 & 3] & eorx) ^ @@ -541,6 +562,11 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[3] = SWAP32((video_font_draw_table32 [bits >> 4][3] & eorx) ^ bgx); + + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[4] = SWAP32((video_font_draw_table32 [bits & 15][0] & eorx) ^ bgx); @@ -576,6 +602,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[2] = (video_font_draw_table24[bits >> 4][2] & eorx) ^ bgx; + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[3] = (video_font_draw_table24[bits & 15][0] & eorx) ^ bgx; @@ -1996,6 +2026,8 @@ static void *video_logo(void) return video_fb_address + video_logo_height * VIDEO_LINE_LEN; } #endif + if (board_cfb_skip()) + return 0; sprintf(info, " %s", version_string); @@ -2205,6 +2237,9 @@ int drv_video_init(void) /* Init video chip - returns with framebuffer cleared */ skip_dev_init = (video_init() == -1); + if (board_cfb_skip()) + return 0; + #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE) debug("KBD: Keyboard init ...\n"); skip_dev_init |= (VIDEO_KBD_INIT_FCT == -1); diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 373991dde..3a5f325cd 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -24,10 +24,17 @@ #include <asm/arch/hardware.h> #include "videomodes.h" -#include <asm/arch/da8xx-fb.h> +#include "da8xx-fb.h" + +#if !defined(DA8XX_LCD_CNTL_BASE) +#define DA8XX_LCD_CNTL_BASE DAVINCI_LCD_CNTL_BASE +#endif #define DRIVER_NAME "da8xx_lcdc" +#define LCD_VERSION_1 1 +#define LCD_VERSION_2 2 + /* LCD Status Register */ #define LCD_END_OF_FRAME1 (1 << 9) #define LCD_END_OF_FRAME0 (1 << 8) @@ -42,9 +49,14 @@ #define LCD_DMA_BURST_4 0x2 #define LCD_DMA_BURST_8 0x3 #define LCD_DMA_BURST_16 0x4 -#define LCD_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_V1_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_V2_END_OF_FRAME0_INT_ENA (1 << 8) +#define LCD_V2_END_OF_FRAME1_INT_ENA (1 << 9) #define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0) +#define LCD_V2_TFT_24BPP_MODE (1 << 25) +#define LCD_V2_TFT_24BPP_UNPACK (1 << 26) + /* LCD Control Register */ #define LCD_CLK_DIVISOR(x) ((x) << 8) #define LCD_RASTER_MODE 0x01 @@ -58,12 +70,20 @@ #define LCD_MONO_8BIT_MODE (1 << 9) #define LCD_RASTER_ORDER (1 << 8) #define LCD_TFT_MODE (1 << 7) -#define LCD_UNDERFLOW_INT_ENA (1 << 6) -#define LCD_PL_ENABLE (1 << 4) +#define LCD_V1_UNDERFLOW_INT_ENA (1 << 6) +#define LCD_V2_UNDERFLOW_INT_ENA (1 << 5) +#define LCD_V1_PL_INT_ENA (1 << 4) +#define LCD_V2_PL_INT_ENA (1 << 6) #define LCD_MONOCHROME_MODE (1 << 1) #define LCD_RASTER_ENABLE (1 << 0) #define LCD_TFT_ALT_ENABLE (1 << 23) #define LCD_STN_565_ENABLE (1 << 24) +#define LCD_V2_DMA_CLK_EN (1 << 2) +#define LCD_V2_LIDD_CLK_EN (1 << 1) +#define LCD_V2_CORE_CLK_EN (1 << 0) +#define LCD_V2_LPP_B10 26 +#define LCD_V2_TFT_24BPP_MODE (1 << 25) +#define LCD_V2_TFT_24BPP_UNPACK (1 << 26) /* LCD Raster Timing 2 Register */ #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) @@ -74,6 +94,8 @@ #define LCD_INVERT_LINE_CLOCK (1 << 21) #define LCD_INVERT_FRAME_CLOCK (1 << 20) +/* Clock registers available only on Version 2 */ +#define LCD_CLK_MAIN_RESET (1 << 3) /* LCD Block */ struct da8xx_lcd_regs { u32 revid; @@ -97,6 +119,15 @@ struct da8xx_lcd_regs { u32 dma_frm_buf_ceiling_addr_0; u32 dma_frm_buf_base_addr_1; u32 dma_frm_buf_ceiling_addr_1; + u32 resv1; + u32 raw_stat; + u32 masked_stat; + u32 int_ena_set; + u32 int_ena_clr; + u32 end_of_int_ind; + /* Clock registers available only on Version 2 */ + u32 clk_ena; + u32 clk_reset; }; #define LCD_NUM_BUFFERS 1 @@ -107,6 +138,8 @@ struct da8xx_lcd_regs { #define RIGHT_MARGIN 64 #define UPPER_MARGIN 32 #define LOWER_MARGIN 32 +#define WAIT_FOR_FRAME_DONE true +#define NO_WAIT_FOR_FRAME_DONE false #define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP) @@ -119,6 +152,8 @@ static GraphicDevice gpanel; static const struct da8xx_panel *lcd_panel; static struct fb_info *da8xx_fb_info; static int bits_x_pixel; +static unsigned int lcd_revision; +const struct lcd_ctrl_config *da8xx_lcd_cfg; static inline unsigned int lcdc_read(u32 *addr) { @@ -179,35 +214,24 @@ static struct fb_fix_screeninfo da8xx_fb_fix = { .accel = FB_ACCEL_NONE }; -static const struct display_panel disp_panel = { - QVGA, - 16, - 16, - COLOR_ACTIVE, -}; - -static const struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias = 255, - .ac_bias_intrpt = 0, - .dma_burst_sz = 16, - .bpp = 16, - .fdd = 255, - .tft_alt_mode = 0, - .stn_565_mode = 0, - .mono_8bit_mode = 0, - .invert_line_clock = 1, - .invert_frm_clock = 1, - .sync_edge = 0, - .sync_ctrl = 1, - .raster_order = 0, -}; - /* Enable the Raster Engine of the LCD Controller */ static inline void lcd_enable_raster(void) { u32 reg; + /* Put LCDC in reset for several cycles */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_CLK_MAIN_RESET, + &da8xx_fb_reg_base->clk_reset); + + udelay(1000); + /* Bring LCDC out of reset */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(0, + &da8xx_fb_reg_base->clk_reset); + + udelay(1000); + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); if (!(reg & LCD_RASTER_ENABLE)) lcdc_write(reg | LCD_RASTER_ENABLE, @@ -215,14 +239,40 @@ static inline void lcd_enable_raster(void) } /* Disable the Raster Engine of the LCD Controller */ -static inline void lcd_disable_raster(void) +static inline void lcd_disable_raster(bool wait_for_frame_done) { u32 reg; + u32 loop_cnt = 0; + u32 stat; + u32 i = 0; + + if (wait_for_frame_done) + loop_cnt = 5000; reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); if (reg & LCD_RASTER_ENABLE) lcdc_write(reg & ~LCD_RASTER_ENABLE, &da8xx_fb_reg_base->raster_ctrl); + + /* Wait for the current frame to complete */ + do { + if (lcd_revision == LCD_VERSION_1) + stat = lcdc_read(&da8xx_fb_reg_base->stat); + else + stat = lcdc_read(&da8xx_fb_reg_base->raw_stat); + + mdelay(1); + } while (!(stat & 0x01) && (i++ < loop_cnt)); + + if (lcd_revision == LCD_VERSION_1) + lcdc_write(stat, &da8xx_fb_reg_base->stat); + else + lcdc_write(stat, &da8xx_fb_reg_base->raw_stat); + + if ((loop_cnt != 0) && (i >= loop_cnt)) { + printf("LCD Controller timed out\n"); + return; + } } static void lcd_blit(int load_mode, struct da8xx_fb_par *par) @@ -231,6 +281,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) u32 end; u32 reg_ras; u32 reg_dma; + u32 reg_int; /* init reg to clear PLM (loading mode) fields */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); @@ -243,7 +294,15 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) end = par->dma_end; reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); - reg_dma |= LCD_END_OF_FRAME_INT_ENA; + if (lcd_revision == LCD_VERSION_1) { + reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_END_OF_FRAME0_INT_ENA | + LCD_V2_END_OF_FRAME1_INT_ENA | + LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } #if (LCD_NUM_BUFFERS == 2) reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; @@ -264,7 +323,13 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) end = start + par->palette_sz - 1; reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); - reg_ras |= LCD_PL_ENABLE; + if (lcd_revision == LCD_VERSION_1) { + reg_ras |= LCD_V1_PL_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_PL_INT_ENA; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); @@ -348,6 +413,7 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) { u32 reg; + u32 reg_int; reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE | LCD_MONO_8BIT_MODE | @@ -375,7 +441,13 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) } /* enable additional interrupts here */ - reg |= LCD_UNDERFLOW_INT_ENA; + if (lcd_revision == LCD_VERSION_1) { + reg |= LCD_V1_UNDERFLOW_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_UNDERFLOW_INT_ENA; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); @@ -413,22 +485,53 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, /* Set the Panel Width */ /* Pixels per line = (PPL + 1)*16 */ - /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ - width &= 0x3f0; + if (lcd_revision == LCD_VERSION_1) { + /* + * 0x3F in bits 4..9 gives max horisontal resolution = 1024 + * pixels + */ + width &= 0x3f0; + } else { + /* + * 0x7F in bits 4..10 gives max horizontal resolution = 2048 + * pixels. + */ + width &= 0x7f0; + } reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0); reg &= 0xfffffc00; - reg |= ((width >> 4) - 1) << 4; + if (lcd_revision == LCD_VERSION_1) { + reg |= ((width >> 4) - 1) << 4; + } else { + width = (width >> 4) - 1; + reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3); + } lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); /* Set the Panel Height */ + /* Set bits 9:0 of Lines Per Pixel */ reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1); reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); + /* Set bit 10 of Lines Per Pixel */ + if (lcd_revision == LCD_VERSION_2) { + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); + reg |= ((height - 1) & 0x400) << 16; + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); + } + /* Set the Raster Order of the Frame Buffer */ reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8); if (raster_order) reg |= LCD_RASTER_ORDER; + + if (bpp == 24) + reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE); + else if (bpp == 32) + reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE + | LCD_V2_TFT_24BPP_UNPACK); + lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); switch (bpp) { @@ -436,6 +539,8 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, case 2: case 4: case 16: + case 24: + case 32: par->palette_sz = 16 * 2; break; @@ -494,6 +599,23 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, update_hw = 1; palette[0] = 0x4000; } + } else if (((info->var.bits_per_pixel == 32) && regno < 32) || + ((info->var.bits_per_pixel == 24) && regno < 24)) { + red >>= (24 - info->var.red.length); + red <<= info->var.red.offset; + + green >>= (24 - info->var.green.length); + green <<= info->var.green.offset; + + blue >>= (24 - info->var.blue.length); + blue <<= info->var.blue.offset; + + par->pseudo_palette[regno] = red | green | blue; + + if (palette[0] != 0x4000) { + update_hw = 1; + palette[0] = 0x4000; + } } /* Update the palette in the h/w as needed. */ @@ -506,11 +628,18 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, static void lcd_reset(struct da8xx_fb_par *par) { /* Disable the Raster if previously Enabled */ - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); /* DMA has to be disabled */ lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl); lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl); + + if (lcd_revision == LCD_VERSION_2) { + lcdc_write(0, &da8xx_fb_reg_base->int_ena_set); + /* Write 1 to reset */ + lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset); + lcdc_write(0, &da8xx_fb_reg_base->clk_reset); + } } static void lcd_calc_clk_divider(struct da8xx_fb_par *par) @@ -521,12 +650,17 @@ static void lcd_calc_clk_divider(struct da8xx_fb_par *par) lcd_clk = clk_get(2); div = lcd_clk / par->pxl_clk; - debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n", - lcd_clk, div, par->pxl_clk); + debug("LCD Clock: %d Divider: %d PixClk: %d\n", + lcd_clk, div, par->pxl_clk); /* Configure the LCD clock divisor. */ lcdc_write(LCD_CLK_DIVISOR(div) | (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl); + + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | + LCD_V2_CORE_CLK_EN, + &da8xx_fb_reg_base->clk_ena); } static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, @@ -566,7 +700,8 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, if (ret < 0) return ret; - if (QVGA != cfg->p_disp_panel->panel_type) + if ((QVGA != cfg->p_disp_panel->panel_type) && + (WVGA != cfg->p_disp_panel->panel_type)) return -EINVAL; if (cfg->bpp <= cfg->p_disp_panel->max_bpp && @@ -602,7 +737,7 @@ static void lcdc_dma_start(void) &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); } -static u32 lcdc_irq_handler(void) +static u32 lcdc_irq_handler_rev01(void) { struct da8xx_fb_par *par = da8xx_fb_info->par; u32 stat = lcdc_read(&da8xx_fb_reg_base->stat); @@ -610,7 +745,7 @@ static u32 lcdc_irq_handler(void) if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { debug("LCD_SYNC_LOST\n"); - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); lcdc_write(stat, &da8xx_fb_reg_base->stat); lcd_enable_raster(); return LCD_SYNC_LOST; @@ -622,13 +757,13 @@ static u32 lcdc_irq_handler(void) * interrupt via the following write to the status register. If * this is done after then one gets multiple PL done interrupts. */ - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); lcdc_write(stat, &da8xx_fb_reg_base->stat); /* Disable PL completion inerrupt */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); - reg_ras &= ~LCD_PL_ENABLE; + reg_ras &= ~LCD_V1_PL_INT_ENA; lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); /* Setup and start data loading mode */ @@ -650,6 +785,66 @@ static u32 lcdc_irq_handler(void) return stat; } +static u32 lcdc_irq_handler_rev02(void) +{ + struct da8xx_fb_par *par = da8xx_fb_info->par; + u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat); + u32 reg_int; + + if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { + debug("LCD_SYNC_LOST\n"); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + lcd_enable_raster(); + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_SYNC_LOST; + } else if (stat & LCD_PL_LOAD_DONE) { + debug("LCD_PL_LOAD_DONE\n"); + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + + /* Disable PL completion inerrupt */ + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) | + (LCD_V2_PL_INT_ENA); + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_PL_LOAD_DONE; + } else { + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + + if (stat & LCD_END_OF_FRAME0) + debug("LCD_END_OF_FRAME0\n"); + + lcdc_write(par->dma_start, + &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(par->dma_end, + &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + par->vsync_flag = 1; + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_END_OF_FRAME0; + } + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return stat; +} + +static u32 lcdc_irq_handler(void) +{ + if (lcd_revision == LCD_VERSION_1) + return lcdc_irq_handler_rev01(); + else + return lcdc_irq_handler_rev02(); +} + static u32 wait_for_event(u32 event) { u32 timeout = 50000; @@ -673,6 +868,7 @@ void *video_hw_init(void) { struct da8xx_fb_par *par; u32 size; + u32 rev; char *p; if (!lcd_panel) { @@ -685,6 +881,10 @@ void *video_hw_init(void) gpanel.plnSizeY = lcd_panel->height; switch (bits_x_pixel) { + case 32: + gpanel.gdfBytesPP = 4; + gpanel.gdfIndex = GDF_32BIT_X888RGB; + break; case 24: gpanel.gdfBytesPP = 4; gpanel.gdfIndex = GDF_32BIT_X888RGB; @@ -699,12 +899,29 @@ void *video_hw_init(void) break; } - da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE; + da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE; + + /* Determine LCD IP Version */ + rev = lcdc_read(&da8xx_fb_reg_base->revid); + switch (rev) { + case 0x4C100102: + lcd_revision = LCD_VERSION_1; + break; + case 0x4F200800: + case 0x4F201000: + lcd_revision = LCD_VERSION_2; + break; + default: + printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n", + rev); + lcd_revision = LCD_VERSION_1; + break; + } - debug("Resolution: %dx%d %x\n", - gpanel.winSizeX, - gpanel.winSizeY, - lcd_cfg.bpp); + debug("rev: 0x%x Resolution: %dx%d %d\n", rev, + gpanel.winSizeX, + gpanel.winSizeY, + da8xx_lcd_cfg->bpp); size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par); da8xx_fb_info = malloc(size); @@ -722,13 +939,14 @@ void *video_hw_init(void) par = da8xx_fb_info->par; par->pxl_clk = lcd_panel->pxl_clk; - if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) { + if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) { printf("lcd_init failed\n"); goto err_release_fb; } /* allocate frame buffer */ - par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp; + par->vram_size = lcd_panel->width * lcd_panel->height * + da8xx_lcd_cfg->bpp; par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8; par->vram_virt = malloc(par->vram_size); @@ -741,12 +959,13 @@ void *video_hw_init(void) printf("GLCD: malloc for frame buffer failed\n"); goto err_release_fb; } + gd->fb_base = (int)par->vram_virt; gpanel.frameAdrs = (unsigned int)par->vram_virt; da8xx_fb_info->screen_base = (char *) par->vram_virt; da8xx_fb_fix.smem_start = gpanel.frameAdrs; da8xx_fb_fix.smem_len = par->vram_size; - da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8; + da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8; par->dma_start = par->vram_phys; par->dma_end = par->dma_start + lcd_panel->height * @@ -762,7 +981,7 @@ void *video_hw_init(void) par->p_palette_base = (unsigned int)par->v_palette_base; /* Initialize par */ - da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp; + da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp; da8xx_fb_var.xres = lcd_panel->width; da8xx_fb_var.xres_virtual = lcd_panel->width; @@ -771,8 +990,8 @@ void *video_hw_init(void) da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS; da8xx_fb_var.grayscale = - lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; - da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp; + da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; + da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp; da8xx_fb_var.hsync_len = lcd_panel->hsw; da8xx_fb_var.vsync_len = lcd_panel->vsw; @@ -787,8 +1006,11 @@ void *video_hw_init(void) /* Clear interrupt */ memset((void *)par->vram_virt, 0, par->vram_size); - lcd_disable_raster(); - lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + if (lcd_revision == LCD_VERSION_1) + lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + else + lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat); debug("Palette at 0x%x size %d\n", par->p_palette_base, par->palette_sz); lcdc_dma_start(); @@ -823,8 +1045,10 @@ void video_set_lut(unsigned int index, /* color number */ return; } -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel) +void da8xx_video_init(const struct da8xx_panel *panel, + const struct lcd_ctrl_config *lcd_cfg, int bits_pixel) { lcd_panel = panel; + da8xx_lcd_cfg = lcd_cfg; bits_x_pixel = bits_pixel; } diff --git a/arch/arm/include/asm/arch-davinci/da8xx-fb.h b/drivers/video/da8xx-fb.h index c115034f0..6447a4047 100644 --- a/arch/arm/include/asm/arch-davinci/da8xx-fb.h +++ b/drivers/video/da8xx-fb.h @@ -17,7 +17,8 @@ #define DA8XX_FB_H enum panel_type { - QVGA = 0 + QVGA = 0, + WVGA }; enum panel_shade { @@ -108,6 +109,8 @@ struct lcd_sync_arg { int pulse_width; }; -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel); +void da8xx_video_init(const struct da8xx_panel *panel, + const struct lcd_ctrl_config *lcd_cfg, + int bits_pixel); #endif /* ifndef DA8XX_FB_H */ diff --git a/drivers/video/exynos_mipi_dsi_common.c b/drivers/video/exynos_mipi_dsi_common.c index 2cc847f6e..97e12484f 100644 --- a/drivers/video/exynos_mipi_dsi_common.c +++ b/drivers/video/exynos_mipi_dsi_common.c @@ -50,7 +50,7 @@ static unsigned int dpll_table[15] = { }; static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, - unsigned int data0, unsigned int data1) + const unsigned char *data0, unsigned int data1) { unsigned int data_cnt = 0, payload = 0; @@ -62,42 +62,40 @@ static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, */ if ((data1 - data_cnt) < 4) { if ((data1 - data_cnt) == 3) { - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8 | - (*(u8 *)(data0 + (data_cnt + 2))) << 16; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8 | + data0[data_cnt + 2] << 16; debug("count = 3 payload = %x, %x %x %x\n", - payload, *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2))); + payload, data0[data_cnt], + data0[data_cnt + 1], + data0[data_cnt + 2]); } else if ((data1 - data_cnt) == 2) { - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8; debug("count = 2 payload = %x, %x %x\n", payload, - *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1))); + data0[data_cnt], data0[data_cnt + 1]); } else if ((data1 - data_cnt) == 1) { - payload = *(u8 *)(data0 + data_cnt); + payload = data0[data_cnt]; } } else { /* send 4bytes per one time. */ - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8 | - (*(u8 *)(data0 + (data_cnt + 2))) << 16 | - (*(u8 *)(data0 + (data_cnt + 3))) << 24; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8 | + data0[data_cnt + 2] << 16 | + data0[data_cnt + 3] << 24; debug("count = 4 payload = %x, %x %x %x %x\n", payload, *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2)), - *(u8 *)(data0 + (data_cnt + 3))); - + data0[data_cnt + 1], + data0[data_cnt + 2], + data0[data_cnt + 3]); } exynos_mipi_dsi_wr_tx_data(dsim, payload); } } int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1) + const unsigned char *data0, unsigned int data1) { unsigned int timeout = TRY_GET_FIFO_TIMEOUT; unsigned long delay_val, delay; @@ -136,8 +134,8 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_DCS_SHORT_WRITE_PARAM: case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: debug("data0 = %x data1 = %x\n", - data0, data1); - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + data0[0], data0[1]); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); if (check_rx_ack) { /* process response func should be implemented */ return 0; @@ -150,7 +148,7 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_COLOR_MODE_ON: case MIPI_DSI_SHUTDOWN_PERIPHERAL: case MIPI_DSI_TURN_ON_PERIPHERAL: - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); if (check_rx_ack) { /* process response func should be implemented. */ return 0; @@ -172,7 +170,7 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: case MIPI_DSI_DCS_READ: exynos_mipi_dsi_clear_all_interrupt(dsim); - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); /* process response func should be implemented. */ return 0; @@ -183,21 +181,19 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_GENERIC_LONG_WRITE: case MIPI_DSI_DCS_LONG_WRITE: { - unsigned int data_cnt = 0, payload = 0; + unsigned int payload = 0; /* if data count is less then 4, then send 3bytes data. */ if (data1 < 4) { - payload = *(u8 *)(data0) | - *(u8 *)(data0 + 1) << 8 | - *(u8 *)(data0 + 2) << 16; + payload = data0[0] | + data0[1] << 8 | + data0[2] << 16; exynos_mipi_dsi_wr_tx_data(dsim, payload); debug("count = %d payload = %x,%x %x %x\n", - data1, payload, - *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2))); + data1, payload, data0[0], + data0[1], data0[2]); } else { /* in case that data count is more then 4 */ exynos_mipi_dsi_long_data_wr(dsim, data0, data1); diff --git a/drivers/video/exynos_mipi_dsi_common.h b/drivers/video/exynos_mipi_dsi_common.h index 318c7ecec..ef6510abd 100644 --- a/drivers/video/exynos_mipi_dsi_common.h +++ b/drivers/video/exynos_mipi_dsi_common.h @@ -13,7 +13,7 @@ #define _EXYNOS_MIPI_DSI_COMMON_H int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, unsigned int enable); unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, unsigned int pre_divider, unsigned int main_divider, diff --git a/drivers/video/exynos_mipi_dsi_lowlevel.c b/drivers/video/exynos_mipi_dsi_lowlevel.c index b47eee45d..1313bcea4 100644 --- a/drivers/video/exynos_mipi_dsi_lowlevel.c +++ b/drivers/video/exynos_mipi_dsi_lowlevel.c @@ -600,7 +600,7 @@ unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim) } void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1) + unsigned int di, const unsigned char data0, const unsigned char data1) { struct exynos_mipi_dsim *mipi_dsim = (struct exynos_mipi_dsim *)samsung_get_base_mipi_dsim(); diff --git a/drivers/video/exynos_mipi_dsi_lowlevel.h b/drivers/video/exynos_mipi_dsi_lowlevel.h index 8a45954e9..59f6ce09e 100644 --- a/drivers/video/exynos_mipi_dsi_lowlevel.h +++ b/drivers/video/exynos_mipi_dsi_lowlevel.h @@ -91,7 +91,7 @@ unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim); void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim); void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1); + unsigned int di, const unsigned char data0, const unsigned char data1); void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim, unsigned int tx_data); diff --git a/drivers/video/l5f31188.c b/drivers/video/l5f31188.c new file mode 100644 index 000000000..3312dcfb3 --- /dev/null +++ b/drivers/video/l5f31188.c @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. All rights reserved. + * Hyungwon Hwang <human.hwang@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/mipi_dsim.h> + +#define SCAN_FROM_LEFT_TO_RIGHT 0 +#define SCAN_FROM_RIGHT_TO_LEFT 1 +#define SCAN_FROM_TOP_TO_BOTTOM 0 +#define SCAN_FROM_BOTTOM_TO_TOP 1 + +static void l5f31188_sleep_in(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x10, 0x00); +} + +static void l5f31188_sleep_out(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x11, 0x00); +} + +static void l5f31188_set_gamma(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x26, 0x00); +} + +static void l5f31188_display_off(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x28, 0x00); +} + +static void l5f31188_display_on(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x29, 0x00); +} + +static void l5f31188_ctl_memory_access(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, + int h_direction, int v_direction) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x36, + (((h_direction & 0x1) << 1) | (v_direction & 0x1))); +} + +static void l5f31188_set_pixel_format(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x3A, 0x70); +} + +static void l5f31188_write_disbv(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, unsigned int brightness) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x51, brightness); +} + +static void l5f31188_write_ctrld(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x53, 0x2C); +} + +static void l5f31188_write_cabc(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, + unsigned int wm_mode) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x55, wm_mode); +} + +static void l5f31188_write_cabcmb(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, unsigned int min_brightness) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x5E, + min_brightness); +} + +static void l5f31188_set_extension(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xB9, 0xFF, 0x83, 0x94 + }; + + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_dgc_lut(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xC1, 0x01, 0x00, 0x04, 0x0E, 0x18, 0x1E, 0x26, + 0x2F, 0x36, 0x3E, 0x47, 0x4E, 0x56, 0x5D, 0x65, + 0x6D, 0x75, 0x7D, 0x84, 0x8C, 0x94, 0x9C, 0xA4, + 0xAD, 0xB5, 0xBD, 0xC5, 0xCC, 0xD4, 0xDE, 0xE5, + 0xEE, 0xF7, 0xFF, 0x3F, 0x9A, 0xCE, 0xD4, 0x21, + 0xA1, 0x26, 0x54, 0x00, 0x00, 0x04, 0x0E, 0x19, + 0x1F, 0x27, 0x30, 0x37, 0x40, 0x48, 0x50, 0x58, + 0x60, 0x67, 0x6F, 0x77, 0x7F, 0x87, 0x8F, 0x97, + 0x9F, 0xA7, 0xB0, 0xB8, 0xC0, 0xC8, 0xCE, 0xD8, + 0xE0, 0xE7, 0xF0, 0xF7, 0xFF, 0x3C, 0xEB, 0xFD, + 0x2F, 0x66, 0xA8, 0x2C, 0x46, 0x00, 0x00, 0x04, + 0x0E, 0x18, 0x1E, 0x26, 0x30, 0x38, 0x41, 0x4A, + 0x52, 0x5A, 0x62, 0x6B, 0x73, 0x7B, 0x83, 0x8C, + 0x94, 0x9C, 0xA5, 0xAD, 0xB6, 0xBD, 0xC5, 0xCC, + 0xD4, 0xDD, 0xE3, 0xEB, 0xF2, 0xF9, 0xFF, 0x3F, + 0xA4, 0x8A, 0x8F, 0xC7, 0x33, 0xF5, 0xE9, 0x00 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_tcon(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xC7, 0x00, 0x20 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_ptba(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xBF, 0x06, 0x10 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_eco(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xC6, 0x0C); +} + +static int l5f31188_panel_init(struct mipi_dsim_device *dev) +{ + struct mipi_dsim_master_ops *ops = dev->master_ops; + + l5f31188_set_extension(dev, ops); + l5f31188_set_dgc_lut(dev, ops); + + l5f31188_set_eco(dev, ops); + l5f31188_set_tcon(dev, ops); + l5f31188_set_ptba(dev, ops); + l5f31188_set_gamma(dev, ops); + l5f31188_ctl_memory_access(dev, ops, + SCAN_FROM_LEFT_TO_RIGHT, SCAN_FROM_TOP_TO_BOTTOM); + l5f31188_set_pixel_format(dev, ops); + l5f31188_write_disbv(dev, ops, 0xFF); + l5f31188_write_ctrld(dev, ops); + l5f31188_write_cabc(dev, ops, 0x0); + l5f31188_write_cabcmb(dev, ops, 0x0); + + l5f31188_sleep_out(dev, ops); + + /* 120 msec */ + udelay(120 * 1000); + + return 0; +} + +static void l5f31188_display_enable(struct mipi_dsim_device *dev) +{ + struct mipi_dsim_master_ops *ops = dev->master_ops; + l5f31188_display_on(dev, ops); +} + +static struct mipi_dsim_lcd_driver l5f31188_dsim_ddi_driver = { + .name = "l5f31188", + .id = -1, + + .mipi_panel_init = l5f31188_panel_init, + .mipi_display_on = l5f31188_display_enable, +}; + +void l5f31188_init(void) +{ + exynos_mipi_dsi_register_lcd_driver(&l5f31188_dsim_ddi_driver); +} diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 6bf9fc503..03b0f88ac 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -15,11 +15,25 @@ #include <asm/errno.h> #include <asm/io.h> +#include <asm/imx-common/dma.h> + #include "videomodes.h" #define PS2KHZ(ps) (1000000000UL / (ps)) static GraphicDevice panel; +struct mxs_dma_desc desc; + +/** + * mxsfb_system_setup() - Fine-tune LCDIF configuration + * + * This function is used to adjust the LCDIF configuration. This is usually + * needed when driving the controller in System-Mode to operate an 8080 or + * 6800 connected SmartLCD. + */ +__weak void mxsfb_system_setup(void) +{ +} /* * DENX M28EVK: @@ -75,6 +89,9 @@ static void mxs_lcd_init(GraphicDevice *panel, writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET, ®s->hw_lcdif_ctrl1); + + mxsfb_system_setup(); + writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, ®s->hw_lcdif_transfer_count); @@ -102,8 +119,10 @@ static void mxs_lcd_init(GraphicDevice *panel, /* Flush FIFO first */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set); +#ifndef CONFIG_VIDEO_MXS_MODE_SYSTEM /* Sync signals ON */ setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON); +#endif /* FIFO cleared */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr); @@ -161,7 +180,8 @@ void *video_hw_init(void) panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; /* Allocate framebuffer */ - fb = malloc(panel.memSize); + fb = memalign(ARCH_DMA_MINALIGN, + roundup(panel.memSize, ARCH_DMA_MINALIGN)); if (!fb) { printf("MXSFB: Error allocating framebuffer!\n"); return NULL; @@ -177,5 +197,28 @@ void *video_hw_init(void) /* Start framebuffer */ mxs_lcd_init(&panel, &mode, bpp); +#ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM + /* + * If the LCD runs in system mode, the LCD refresh has to be triggered + * manually by setting the RUN bit in HW_LCDIF_CTRL register. To avoid + * having to set this bit manually after every single change in the + * framebuffer memory, we set up specially crafted circular DMA, which + * sets the RUN bit, then waits until it gets cleared and repeats this + * infinitelly. This way, we get smooth continuous updates of the LCD. + */ + struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; + + memset(&desc, 0, sizeof(struct mxs_dma_desc)); + desc.address = (dma_addr_t)&desc; + desc.cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN | + MXS_DMA_DESC_WAIT4END | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + desc.cmd.pio_words[0] = readl(®s->hw_lcdif_ctrl) | LCDIF_CTRL_RUN; + desc.cmd.next = (uint32_t)&desc.cmd; + + /* Execute the DMA chain. */ + mxs_dma_circ_start(MXS_DMA_CHANNEL_AHB_APBH_LCDIF, &desc); +#endif + return (void *)&panel; } diff --git a/drivers/video/s6e8ax0.c b/drivers/video/s6e8ax0.c index fc092522b..0e97f511f 100644 --- a/drivers/video/s6e8ax0.c +++ b/drivers/video/s6e8ax0.c @@ -34,11 +34,11 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev) if (reverse) { ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send_reverse, + data_to_send_reverse, ARRAY_SIZE(data_to_send_reverse)); } else { ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } } @@ -50,8 +50,7 @@ static void s6e8ax0_display_cond(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev) @@ -65,15 +64,18 @@ static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_gamma_update(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0xf7, 0x03 + }; - ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xf7, 0x3); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev) @@ -84,8 +86,7 @@ static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev) @@ -97,8 +98,7 @@ static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev) @@ -109,8 +109,7 @@ static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev) @@ -121,8 +120,7 @@ static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev) @@ -133,14 +131,18 @@ static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control3(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0xe3, 0x40 + }; - ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xe3, 0x40); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev) @@ -151,7 +153,7 @@ static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev) @@ -162,24 +164,29 @@ static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_display_on(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0x29, 0x00 + }; - ops->cmd_write(dsim_dev, - MIPI_DSI_DCS_SHORT_WRITE, 0x29, 0x00); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_sleep_out(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0x11, 0x00 + }; - ops->cmd_write(dsim_dev, - MIPI_DSI_DCS_SHORT_WRITE, 0x11, 0x00); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev) @@ -190,7 +197,7 @@ static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev) @@ -201,7 +208,7 @@ static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_panel_init(struct mipi_dsim_device *dsim_dev) diff --git a/drivers/video/sed156x.c b/drivers/video/sed156x.c index d8b0d7f5d..f324354c3 100644 --- a/drivers/video/sed156x.c +++ b/drivers/video/sed156x.c @@ -25,7 +25,6 @@ /* include the font data */ #include <video_font.h> -#include <video_font_data.h> #if VIDEO_FONT_WIDTH != 8 || VIDEO_FONT_HEIGHT != 16 #error Expecting VIDEO_FONT_WIDTH == 8 && VIDEO_FONT_HEIGHT == 16 diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 09043435b..2f0bc6b06 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -33,7 +33,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE @@ -75,6 +74,13 @@ #define VSC3308_TX_ADDRESS 0x02 #define VSC3308_RX_ADDRESS 0x03 +/* IDT clock synthesizers */ +#define CONFIG_IDT8T49N222A +#define I2C_CH_IDT 0x9 + +#define IDT_SERDES1_ADDRESS 0x6E +#define IDT_SERDES2_ADDRESS 0x6C + #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH @@ -578,6 +584,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_RMAN + /* Default address of microcode for the Linux Fman driver */ #if defined(CONFIG_SPIFLASH) /* diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 1ab689158..03f3a4f80 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -224,6 +224,10 @@ combinations. this should be removed later #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR +/* DSP CCSRBAR */ +#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT +#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT + /* * IFC Definitions */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h new file mode 100644 index 000000000..83779eff8 --- /dev/null +++ b/include/configs/C29XPCIE.h @@ -0,0 +1,456 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * C29XPCIE board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_PHYS_64BIT + +#ifdef CONFIG_C29XPCIE +#define CONFIG_PPC_C29X +#endif + +#ifdef CONFIG_SPIFLASH +#define CONFIG_RAMBOOT_SPIFLASH +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ + +#define CONFIG_PCI /* Enable PCI/PCIE */ +#ifdef CONFIG_PCI +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI + +#define CONFIG_E1000 + +/* + * PCI Windows + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +/* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 1" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_TSEC_ENET +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_DDR_CLK_FREQ 100000000 +#define CONFIG_SYS_CLK_FREQ 66666666 + +#define CONFIG_HWCONFIG + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_PANIC_HANG + +/* DDR Setup */ +#define CONFIG_FSL_DDR3 +#define CONFIG_DDR_SPD +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x50 +#define CONFIG_SYS_DDR_RAW_TIMING + +/* DDR ECC Setup*/ +#define CONFIG_DDR_ECC +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER + +#define CONFIG_SYS_SDRAM_SIZE 512 +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR + +/* Platform SRAM setting */ +#define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 +#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ + (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) +#define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) + +/* + * IFC Definitions + */ +/* NOR Flash on IFC */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ + +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ + +/* 16Bit NOR Flash - S29GL512S10TFI01 */ +#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1e) | \ + FTIM1_NOR_TRAD_NOR(0x0f) | \ + FTIM1_NOR_TSEQRAD_NOR(0x0f)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +/* CFI for NOR Flash */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* 8Bit NAND Flash - K9F1G08U0B */ +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_NAND \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2k */ \ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ + FTIM0_NAND_TWP(0x0c) | \ + FTIM0_NAND_TWCHT(0x08) | \ + FTIM0_NAND_TWH(0x06)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ + FTIM1_NAND_TWBE(0x1d) | \ + FTIM1_NAND_TRR(0x08) | \ + FTIM1_NAND_TRP(0x0c)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x18)) +#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +/* Set up IFC registers for boot location NOR/NAND */ +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + +/* CPLD on IFC, selected by CS2 */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ + | CONFIG_SYS_CPLD_BASE) + +#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR2 0x0 +/* CPLD Timing parameters for IFC CS2 */ +#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS2_FTIM3 0x0 + +#if defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#endif + +#define CONFIG_BOARD_EARLY_INIT_R + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 +#define CONFIG_SYS_INIT_RAM_END 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ + - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SERIAL_MULTI /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 + +/* I2C EEPROM */ +/* enable read and write access to EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +#define CONFIG_CMD_I2C + +/* eSPI - Enhanced SPI */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_EON +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_NET_MULTI +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +/* Default mode is RGMII mode */ +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 2 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#if defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#endif +#else +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif + +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#endif + +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=name/of/device-tree.dtb\0" \ + "othbootargs=ramdisk_size=600000\0" \ + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs; " \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 9814ca201..905bacfa9 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -37,7 +37,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h new file mode 100644 index 000000000..9fa6b77ab --- /dev/null +++ b/include/configs/T4240EMU.h @@ -0,0 +1,170 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T4240 EMU board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_T4240EMU +#define CONFIG_PHYS_64BIT + +#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_FSL_DDR_EMU 1 +#define CONFIG_SYS_FSL_NO_QIXIS 1 +#define CONFIG_SYS_FSL_NO_SERDES 1 + +#include "t4qds.h" + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CACHE_FLUSH + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 133333333 +#define CONFIG_FSL_TBCLK_EXTRA_DIV 100 + + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_32 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(0) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x1) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x1)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \ + FTIM2_NOR_TCH(0x0) | \ + FTIM2_NOR_TWP(0x1)) +#define CONFIG_SYS_NOR_FTIM3 0x04000000 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ +#define CONFIG_SYS_FSL_I2C2_SPEED 4000000 + +/* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + + + +#define CONFIG_BOOTDELAY 0 + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240emu/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240emu/t4240emu.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* + * For emulation this causes u-boot to jump to the start of the proof point + * app code automatically + */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_LINUX \ + "errata;" \ + "setenv othbootargs ignore_loglevel;" \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#endif /* __CONFIG_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 9ac7f6992..92a30ab09 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -7,6 +7,9 @@ /* * T4240 QDS board configuration file */ +#ifndef __CONFIG_H +#define __CONFIG_H + #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT @@ -15,4 +18,543 @@ #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg +#endif + +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + +#define CONFIG_SRIO_PCIE_BOOT_MASTER +#define CONFIG_DDR_ECC + #include "t4qds.h" + +#ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RST_FORCE_MEM 0x1 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR +#define VSC3316_FSM_TX_ADDR 0x70 +#define VSC3316_FSM_RX_ADDR 0x71 + +/* + * RapidIO + */ + +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 +#endif + + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define __USB_PHY_TYPE utmi + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240qds/t4240qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c0591c527..c3fb80c8d 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -42,7 +42,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 1b0be23dd..965722844 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -34,7 +34,7 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif -#if defined(CONFIG_P1020RDB) +#if defined(CONFIG_P1020RDB_PC) #define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 @@ -50,6 +50,35 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif +/* + * P1020RDB-PD board has user selectable switches for evaluating different + * frequency and boot options for the P1020 device. The table that + * follow describe the available options. The front six binary number was in + * accordance with SW3[1:6]. + * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off + * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off + * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off + * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off + * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off + * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off + * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off + */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_BOARDNAME "P1020RDB-PD" +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_P1020 +#define CONFIG_SPI_FLASH +#define CONFIG_VSC7385_ENET +#define CONFIG_SLIC +#define __SW_BOOT_MASK 0x03 +#define __SW_BOOT_NOR 0x64 +#define __SW_BOOT_SPI 0x34 +#define __SW_BOOT_SD 0x24 +#define __SW_BOOT_NAND 0x44 +#define __SW_BOOT_PCIE 0x74 +#define CONFIG_SYS_L2_SIZE (256 << 10) +#endif + #if defined(CONFIG_P1021RDB) #define CONFIG_BOARDNAME "P1021RDB-PC" #define CONFIG_NAND_FSL_ELBC @@ -259,7 +288,7 @@ #define SPD_EEPROM_ADDRESS 0x52 #undef CONFIG_FSL_DDR_INTERACTIVE -#ifdef CONFIG_P1020MBG +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G #define CONFIG_CHIP_SELECTS_PER_CTRL 2 #else @@ -330,7 +359,7 @@ /* * Local Bus Definitions */ -#if defined(CONFIG_P1020MBG) +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ #define CONFIG_SYS_FLASH_BASE 0xec000000 #elif defined(CONFIG_P1020UTM) @@ -381,13 +410,27 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#else #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) +#endif #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) +#else #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -395,6 +438,7 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) +#endif #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h new file mode 100644 index 000000000..4aa706422 --- /dev/null +++ b/include/configs/p1_twr.h @@ -0,0 +1,619 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * QorIQ P1 Tower boards configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#if defined(CONFIG_TWR_P1025) +#define CONFIG_BOARDNAME "TWR-P1025" +#define CONFIG_P1025 +#define CONFIG_PHY_ATHEROS +#define CONFIG_QE +#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Conversion of LBC addr */ +#define CONFIG_SYS_LBC_LCRR 0x80000002 /* LB clock ratio reg */ +#endif + +#ifdef CONFIG_SDCARD +#define CONFIG_RAMBOOT_SDCARD +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 +#define CONFIG_MPC85xx + +#define CONFIG_MP + +#define CONFIG_FSL_ELBC +#define CONFIG_PCI +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_CMD_SATA +#define CONFIG_SATA_SIL3114 +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_LIBATA +#define CONFIG_LBA48 + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for TWR-P1025 */ + +#define CONFIG_DDR_CLK_FREQ 66666666 + +#define CONFIG_HWCONFIG +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x1fffffff +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR + +/* DDR Setup */ +#define CONFIG_FSL_DDR3 + +#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +/* Default settings for DDR3 */ +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f +#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 +#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 +#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 +#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 + +#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef +#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 +#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 +#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 + +#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 +#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655a608 +#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 +#define CONFIG_SYS_DDR_RCW_1 0x00000000 +#define CONFIG_SYS_DDR_RCW_2 0x00000000 +#define CONFIG_SYS_DDR_CONTROL 0xc70c0000 /* Type = DDR3 */ +#define CONFIG_SYS_DDR_CONTROL_2 0x04401050 +#define CONFIG_SYS_DDR_TIMING_4 0x00220001 +#define CONFIG_SYS_DDR_TIMING_5 0x03402400 + +#define CONFIG_SYS_DDR_TIMING_3 0x00020000 +#define CONFIG_SYS_DDR_TIMING_0 0x00220004 +#define CONFIG_SYS_DDR_TIMING_1 0x5c5b6544 +#define CONFIG_SYS_DDR_TIMING_2 0x0fa880de +#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 +#define CONFIG_SYS_DDR_MODE_1 0x80461320 +#define CONFIG_SYS_DDR_MODE_2 0x00008000 +#define CONFIG_SYS_DDR_INTERVAL 0x09480000 + +/* + * Memory map + * + * 0x0000_0000 0x1fff_ffff DDR Up to 512MB cacheable + * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) + * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable + * + * Localbus + * 0xe000_0000 0xe002_0000 SSD1289 128K non-cacheable + * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable + * + * 0xff90_0000 0xff97_ffff L2 SRAM Up to 512K cacheable + * 0xffd0_0000 0xffd0_3fff init ram 16K Cacheable + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 + +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \ + | BR_PS_16 | BR_V) + +#define CONFIG_FLASH_OR_PRELIM 0xfc0000b1 + +#define CONFIG_SYS_SSD_BASE 0xe0000000 +#define CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SSD_BASE +#define CONFIG_SSD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_SSD_BASE_PHYS) | \ + BR_PS_16 | BR_V) +#define CONFIG_SSD_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ + OR_GPCM_ACS_DIV2 | OR_GPCM_SCY | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CONFIG_SYS_BR2_PRELIM CONFIG_SSD_BR_PRELIM +#define CONFIG_SYS_OR2_PRELIM CONFIG_SSD_OR_PRELIM + +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 +/* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +/* Size of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024)/* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ + +/* Serial Port + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +#define CONFIG_SYS_64BIT_VSPRINTF +#define CONFIG_SYS_64BIT_STRTOUL + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C spd and slave address */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 + +/* + * I2C2 EEPROM + */ +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C spd and slave address */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 + +#define CONFIG_SYS_I2C_PCA9555_ADDR 0x23 + +/* enable read and write access to EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#if defined(CONFIG_PCI) +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "TWR-ELEV PCIe SLOT" +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#undef CONFIG_TSEC2 +#undef CONFIG_TSEC2_NAME +#define CONFIG_TSEC3 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#undef CONFIG_HAS_ETH2 +#endif /* CONFIG_TSEC_ENET */ + +#ifdef CONFIG_QE +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#endif /* CONFIG_QE */ + +#ifdef CONFIG_TWR_P1025 +/* + * QE UEC ethernet configuration + */ +#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) + +#undef CONFIG_UEC_ETH +#define CONFIG_PHY_MODE_NEED_CHANGE + +#define CONFIG_UEC_ETH1 /* ETH1 */ +#define CONFIG_HAS_ETH0 + +#ifdef CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 0x18 /* 0x18 for MII */ +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 +#endif /* CONFIG_UEC_ETH1 */ + +#define CONFIG_UEC_ETH5 /* ETH5 */ +#define CONFIG_HAS_ETH1 + +#ifdef CONFIG_UEC_ETH5 +#define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ +#define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ +#define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC5_PHY_ADDR 0x19 /* 0x19 for RMII */ +#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 +#endif /* CONFIG_UEC_ETH5 */ +#endif /* CONFIG_TWR-P1025 */ + +/* + * Environment + */ +#ifdef CONFIG_SYS_RAMBOOT +#ifdef CONFIG_RAMBOOT_SDCARD +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#endif +#else +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB + +#if defined(CONFIG_HAS_FSL_DR_USB) +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_STORAGE +#endif +#endif + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ + || defined(CONFIG_FSL_SATA) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ +"netdev=eth0\0" \ +"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ +"loadaddr=1000000\0" \ +"bootfile=uImage\0" \ +"dtbfile=twr-p1025twr.dtb\0" \ +"ramdiskfile=rootfs.ext2.gz.uboot\0" \ +"qefirmwarefile=fsl_qe_ucode_1021_10_A.bin\0" \ +"tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ + "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ +"kernelflash=tftpboot $loadaddr $bootfile; " \ + "protect off 0xefa80000 +$filesize; " \ + "erase 0xefa80000 +$filesize; " \ + "cp.b $loadaddr 0xefa80000 $filesize; " \ + "protect on 0xefa80000 +$filesize; " \ + "cmp.b $loadaddr 0xefa80000 $filesize\0" \ +"dtbflash=tftpboot $loadaddr $dtbfile; " \ + "protect off 0xefe80000 +$filesize; " \ + "erase 0xefe80000 +$filesize; " \ + "cp.b $loadaddr 0xefe80000 $filesize; " \ + "protect on 0xefe80000 +$filesize; " \ + "cmp.b $loadaddr 0xefe80000 $filesize\0" \ +"ramdiskflash=tftpboot $loadaddr $ramdiskfile; " \ + "protect off 0xeeb80000 +$filesize; " \ + "erase 0xeeb80000 +$filesize; " \ + "cp.b $loadaddr 0xeeb80000 $filesize; " \ + "protect on 0xeeb80000 +$filesize; " \ + "cmp.b $loadaddr 0xeeb80000 $filesize\0" \ +"qefirmwareflash=tftpboot $loadaddr $qefirmwarefile; " \ + "protect off 0xefec0000 +$filesize; " \ + "erase 0xefec0000 +$filesize; " \ + "cp.b $loadaddr 0xefec0000 $filesize; " \ + "protect on 0xefec0000 +$filesize; " \ + "cmp.b $loadaddr 0xefec0000 $filesize\0" \ +"consoledev=ttyS0\0" \ +"ramdiskaddr=2000000\0" \ +"ramdiskfile=rootfs.ext2.gz.uboot\0" \ +"fdtaddr=c00000\0" \ +"bdev=sda1\0" \ +"norbootaddr=ef080000\0" \ +"norfdtaddr=ef040000\0" \ +"ramdisk_size=120000\0" \ +"usbboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 " \ +"console=$consoledev,$baudrate $othbootargs ; bootm 0xefa80000 - 0xefe80000" + +#define CONFIG_NFSBOOTCOMMAND \ +"setenv bootargs root=/dev/nfs rw " \ +"nfsroot=$serverip:$rootpath " \ +"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"tftp $loadaddr $bootfile&&" \ +"tftp $fdtaddr $fdtfile&&" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_HDBOOT \ +"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"usb start;" \ +"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ +"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_USB_FAT_BOOT \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"usb start;" \ +"fatload usb 0:2 $loadaddr $bootfile;" \ +"fatload usb 0:2 $fdtaddr $fdtfile;" \ +"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_USB_EXT2_BOOT \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"usb start;" \ +"ext2load usb 0:4 $loadaddr $bootfile;" \ +"ext2load usb 0:4 $fdtaddr $fdtfile;" \ +"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_NORBOOT \ +"setenv bootargs root=/dev/mtdblock3 rw " \ +"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ +"bootm $norbootaddr - $norfdtaddr" + +#define CONFIG_RAMBOOTCOMMAND_TFTP \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"tftp $ramdiskaddr $ramdiskfile;" \ +"tftp $loadaddr $bootfile;" \ +"tftp $fdtaddr $fdtfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"bootm 0xefa80000 0xeeb80000 0xefe80000" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 1ed53dbbb..3e82fc255 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -7,24 +7,8 @@ /* * Corenet DS style board configuration file */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg -#endif - -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -/* Set 1M boot space */ -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_NO_FLASH -#endif +#ifndef __T4QDS_H +#define __T4QDS_H #define CONFIG_CMD_REGINFO @@ -34,7 +18,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE @@ -58,70 +41,16 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ -#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_SYS_NO_FLASH -#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_ENV_IS_NOWHERE -#endif -#else -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#endif - -#if defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_SDCARD) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) -#elif defined(CONFIG_NAND) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -#define CONFIG_ENV_IS_IN_REMOTE -#define CONFIG_ENV_ADDR 0xffe20000 -#define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_ENV_IS_NOWHERE) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -unsigned long get_board_ddr_clk(void); -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC #ifdef CONFIG_DDR_ECC #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xdeadbeef @@ -129,14 +58,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENABLE_36BIT_PHYS -#ifdef CONFIG_PHYS_64BIT #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ -#endif -#if 0 -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#endif #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST @@ -147,17 +71,8 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull -#endif - -/* EEPROM */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* * DDR Setup @@ -174,199 +89,16 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define CONFIG_FSL_DDR3 -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS1 0x51 -#define SPD_EEPROM_ADDRESS2 0x52 -#define SPD_EEPROM_ADDRESS3 0x53 -#define SPD_EEPROM_ADDRESS4 0x54 -#define SPD_EEPROM_ADDRESS5 0x55 -#define SPD_EEPROM_ADDRESS6 0x56 -#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ /* * IFC Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) -/* NOR Flash Timing Params */ -#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 - -#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ - FTIM0_NOR_TEADC(0x5) | \ - FTIM0_NOR_TEAHC(0x5)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1A) |\ - FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ - FTIM2_NOR_TWP(0x1c)) -#define CONFIG_SYS_NOR_FTIM3 0x0 - -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} - -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ -#define QIXIS_BASE 0xffdf0000 -#define QIXIS_LBMAP_SWITCH 6 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 0 -#define QIXIS_LBMAP_DFLTBANK 0x00 -#define QIXIS_LBMAP_ALTBANK 0x04 -#define QIXIS_RST_CTL_RESET 0x83 -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#ifdef CONFIG_PHYS_64BIT -#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) -#else -#define QIXIS_BASE_PHYS QIXIS_BASE -#endif - -#define CONFIG_SYS_CSPR3_EXT (0xf) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_GPCM \ - | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024) -#define CONFIG_SYS_CSOR3 0x0 -/* QIXIS Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ - FTIM0_GPCM_TEADC(0x0e) | \ - FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ - FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ - FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS3_FTIM3 0x0 - -/* NAND Flash on IFC */ -#define CONFIG_NAND_FSL_IFC -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif - -#define CONFIG_SYS_NAND_CSPR_EXT (0xf) -#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ - | CSPR_MSEL_NAND /* MSEL = NAND */ \ - | CSPR_V) -#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) - -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ - | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ - | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ - -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* ONFI NAND Flash mode0 Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ - FTIM0_NAND_TWP(0x18) | \ - FTIM0_NAND_TWCHT(0x07) | \ - FTIM0_NAND_TWH(0x0a)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ - FTIM1_NAND_TWBE(0x39) | \ - FTIM1_NAND_TRR(0x0e) | \ - FTIM1_NAND_TRP(0x18)) -#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ - FTIM2_NAND_TREH(0x0a) | \ - FTIM2_NAND_TWHRE(0x1e)) -#define CONFIG_SYS_NAND_FTIM3 0x0 - -#define CONFIG_SYS_NAND_DDR_LAW 11 - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND - -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -#if defined(CONFIG_NAND) -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 -#else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 -#endif -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_SYS_RAMBOOT -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ #define CONFIG_MISC_INIT_R @@ -376,18 +108,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 /* The assembler doesn't like typecast */ #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ @@ -431,149 +157,55 @@ unsigned long get_board_ddr_clk(void); /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 100000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ -#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ - -#define I2C_MUX_CH_DEFAULT 0x8 -#define I2C_MUX_CH_VOL_MONITOR 0xa -#define I2C_MUX_CH_VSC3316_FS 0xc -#define I2C_MUX_CH_VSC3316_BS 0xd - -/* Voltage monitor on channel 2*/ -#define I2C_VOL_MONITOR_ADDR 0x40 -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 - -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR -#define VSC3316_FSM_TX_ADDR 0x70 -#define VSC3316_FSM_RX_ADDR 0x71 - /* * RapidIO */ #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 -#endif #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull -#else -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 -#endif #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* - * for slave u-boot IMAGE instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull -/* - * for slave UCODE and ENV instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ - -/* slave core release by master*/ -#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 -#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ - -/* - * SRIO_PCIE_BOOT - SLAVE - */ -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) -#endif -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SST -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE 0 - -/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 -#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 -#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, Slot 2, tgtid 2, Base address 201000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 -#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 1, Base address 202000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 -#endif #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull -#else -#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 -#endif #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ /* controller 4, Base address 203000 */ @@ -584,84 +216,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ -/* Qman/Bman */ -#ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 50 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_NUM_PORTALS 50 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 - -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_DPAA_PME -#define CONFIG_SYS_PMAN -#define CONFIG_SYS_DPAA_DCE -#define CONFIG_SYS_INTERLAKEN - -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. - */ -#define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) -#elif defined(CONFIG_NAND) -#define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) -#endif /* CONFIG_NOBQFMAN */ - -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET -#define CONFIG_PHYLIB_10G -#define CONFIG_PHY_VITESSE -#define CONFIG_PHY_TERANETICS -#define SGMII_CARD_PORT1_PHY_ADDR 0x1C -#define SGMII_CARD_PORT2_PHY_ADDR 0x1D -#define SGMII_CARD_PORT3_PHY_ADDR 0x1E -#define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define FM1_10GEC1_PHY_ADDR 0x0 -#define FM1_10GEC2_PHY_ADDR 0x1 -#define FM2_10GEC1_PHY_ADDR 0x2 -#define FM2_10GEC2_PHY_ADDR 0x3 -#endif - #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_NET_MULTI @@ -724,30 +278,6 @@ unsigned long get_board_ddr_clk(void); #endif /* -* USB -*/ -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 -#define CONFIG_HAS_FSL_DR_USB - -#define CONFIG_MMC - -#ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -788,112 +318,11 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 -#define __USB_PHY_TYPE utmi - -/* - * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be - * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to - * cacheline interleaving. It can be cacheline, page, bank, superbank. - * See doc/README.fsl-ddr for details. - */ -#ifdef CONFIG_PPC_T4240 -#define CTRL_INTLV_PREFERED 3way_4KB -#else -#define CTRL_INTLV_PREFERED cacheline -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:" \ - "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ - "bank_intlv=auto;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot && " \ - "protect off $ubootaddr +$filesize && " \ - "erase $ubootaddr +$filesize && " \ - "cp.b $loadaddr $ubootaddr $filesize && " \ - "protect on $ubootaddr +$filesize && " \ - "cmp.b $loadaddr $ubootaddr $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=t4240qds/ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=t4240qds/t4240qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" - -/* For emulation this causes u-boot to jump to the start of the proof point - app code automatically */ -#define CONFIG_PROOF_POINTS \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x29000000 - - -;" \ - "cpu 2 release 0x29000000 - - -;" \ - "cpu 3 release 0x29000000 - - -;" \ - "cpu 4 release 0x29000000 - - -;" \ - "cpu 5 release 0x29000000 - - -;" \ - "cpu 6 release 0x29000000 - - -;" \ - "cpu 7 release 0x29000000 - - -;" \ - "go 0x29000000" - #define CONFIG_HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_ALU \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x01000000 - - -;" \ - "cpu 2 release 0x01000000 - - -;" \ - "cpu 3 release 0x01000000 - - -;" \ - "cpu 4 release 0x01000000 - - -;" \ - "cpu 5 release 0x01000000 - - -;" \ - "cpu 6 release 0x01000000 - - -;" \ - "cpu 7 release 0x01000000 - - -;" \ - "go 0x01000000" - -#define CONFIG_LINUX \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_LINUX - -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> -#endif - #endif /* __CONFIG_H */ diff --git a/include/edid.h b/include/edid.h index f153091f6..480a773d0 100644 --- a/include/edid.h +++ b/include/edid.h @@ -54,7 +54,7 @@ struct edid_detailed_timing { (_x).vertical_blanking) unsigned char hsync_offset; unsigned char hsync_pulse_width; - unsigned char sync_offset_pulse_width; + unsigned char vsync_offset_pulse_width; unsigned char hsync_vsync_offset_pulse_width_hi; #define EDID_DETAILED_TIMING_HSYNC_OFFSET(_x) \ ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 7, 6) << 8) + \ diff --git a/include/pci.h b/include/pci.h index 01002a430..911ba89ac 100644 --- a/include/pci.h +++ b/include/pci.h @@ -410,13 +410,6 @@ #define PCI_MAX_PCI_DEVICES 32 #define PCI_MAX_PCI_FUNCTIONS 8 -#define PCI_DCR 0x54 /* PCIe Device Control Register */ -#define PCI_DSR 0x56 /* PCIe Device Status Register */ -#define PCI_LSR 0x5e /* PCIe Link Status Register */ -#define PCI_LCR 0x5c /* PCIe Link Control Register */ -#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ -#define PCI_LTSSM_L0 0x16 /* L0 state */ - /* Include the ID list */ #include <pci_ids.h> diff --git a/include/video_font.h b/include/video_font.h index 7ef951999..96b9edb0d 100644 --- a/include/video_font.h +++ b/include/video_font.h @@ -8,9 +8,10 @@ #ifndef _VIDEO_FONT_ #define _VIDEO_FONT_ -#define VIDEO_FONT_CHARS 256 -#define VIDEO_FONT_WIDTH 8 -#define VIDEO_FONT_HEIGHT 16 -#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) +#ifdef CONFIG_VIDEO_FONT_4X6 +#include <video_font_4x6.h> +#else +#include <video_font_data.h> +#endif #endif /* _VIDEO_FONT_ */ diff --git a/include/video_font_4x6.h b/include/video_font_4x6.h new file mode 100644 index 000000000..d1778d5b5 --- /dev/null +++ b/include/video_font_4x6.h @@ -0,0 +1,2154 @@ + +/* Hand composed "Minuscule" 4x6 font, with binary data generated using + * Perl stub. + * + * Use 'perl -x mini_4x6.c < mini_4x6.c > new_version.c' to regenerate + * binary data. + * + * Created by Kenneth Albanowski. + * No rights reserved, released to the public domain. + * + * Version 1.0 + */ + +/* + +#!/usr/bin/perl -pn + +s{((0x)?[0-9a-fA-F]+)(.*\[([\*\ ]{4})\])}{ + + ($num,$pat,$bits) = ($1,$3,$4); + + $bits =~ s/([^\s0])|(.)/ defined($1) + 0 /ge; + + $num = ord(pack("B8", $bits)); + $num |= $num >> 4; + $num = sprintf("0x%.2x", $num); + + #print "$num,$pat,$bits\n"; + + $num . $pat; +}ge; + +__END__; +*/ + +/* Note: binary data consists of one byte for each row of each character top + to bottom, character 0 to character 255, six bytes per character. Each + byte contains the same four character bits in both nybbles. + MSBit to LSBit = left to right. + */ + +#ifndef _VIDEO_FONT_DATA_ +#define _VIDEO_FONT_DATA_ + +#define VIDEO_FONT_CHARS 256 +#define VIDEO_FONT_WIDTH 4 +#define VIDEO_FONT_HEIGHT 6 +#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) + +static unsigned char video_fontdata[VIDEO_FONT_SIZE] = { + + /*{*/ + /* Char 0: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 1: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 2: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 3: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 4: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 5: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 6: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 7: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 8: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 9: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 10: '' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 11: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 12: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 13: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 14: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 15: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 16: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 17: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 18: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 19: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 20: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 21: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 22: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 23: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 24: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 25: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 26: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 27: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 28: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 29: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 30: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 31: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 32: ' ' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 33: '!' */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 34: '"' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 35: '#' */ + 0xaa, /*= [* * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 36: '$' */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 37: '%' */ + 0xaa, /*= [* * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 38: '&' */ + 0x66, /*= [ ** ] */ + 0x99, /*= [* *] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0xdd, /*= [** *] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 39: ''' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 40: '(' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 41: ')' */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 42: '*' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 43: '+' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 44: ',' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 45: '-' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 46: '.' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 47: '/' */ + 0x00, /*= [ ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 48: '0' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 49: '1' */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 50: '2' */ + 0xcc, /*= [** ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 51: '3' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 52: '4' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 53: '5' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 54: '6' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 55: '7' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 56: '8' */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 57: '9' */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 58: ':' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 59: ';' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + /*}*/ + /*{*/ /* Char 60: '<' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 61: '=' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 62: '>' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 63: '?' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 64: '@' */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 65: 'A' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 66: 'B' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 67: 'C' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 68: 'D' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 69: 'E' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 70: 'F' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 71: 'G' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 72: 'H' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 73: 'I' */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 74: 'J' */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 75: 'K' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 76: 'L' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 77: 'M' */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 78: 'N' */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 79: 'O' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 80: 'P' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 81: 'Q' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 82: 'R' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 83: 'S' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 84: 'T' */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 85: 'U' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 86: 'V' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 87: 'W' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 88: 'X' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 89: 'Y' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 90: 'Z' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 91: '[' */ + 0x66, /*= [ ** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 92: '\' */ + 0x00, /*= [ ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 93: ']' */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 94: '^' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 95: '_' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 96: '`' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 97: 'a' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 98: 'b' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 99: 'c' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 100: 'd' */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 101: 'e' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 102: 'f' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 103: 'g' */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 104: 'h' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 105: 'i' */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 106: 'j' */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 107: 'k' */ + 0x00, /*= [ ] */ + 0x88, /*= [* ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 108: 'l' */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 109: 'm' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 110: 'n' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 111: 'o' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 112: 'p' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x88, /*= [* ] */ + /*}*/ + /*{*/ /* Char 113: 'q' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 114: 'r' */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 115: 's' */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 116: 't' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 117: 'u' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 118: 'v' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 119: 'w' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 120: 'x' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 121: 'y' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + /*}*/ + /*{*/ /* Char 122: 'z' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 123: '{' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 124: '|' */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 125: '}' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 126: '~' */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 127: '' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 128: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 129: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 130: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 131: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 132: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 133: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 134: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 135: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 136: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 137: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 138: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 139: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 140: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 141: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 142: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 143: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 144: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 145: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 146: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 147: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 148: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 149: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 150: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 151: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 152: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 153: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 154: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 155: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 156: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 157: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 158: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 159: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 160: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 161: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 162: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 163: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 164: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 165: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 166: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 167: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 168: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 169: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 170: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 171: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 172: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 173: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 174: */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 175: */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 176: */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 177: */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + /*}*/ + /*{*/ /* Char 178: */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + /*}*/ + /*{*/ /* Char 179: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 180: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 181: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 182: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 183: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 184: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 185: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 186: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 187: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 188: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 189: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 190: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 191: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 192: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 193: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 194: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 195: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 196: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 197: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 198: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 199: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 200: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 201: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 202: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 203: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 204: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 205: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 206: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 207: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 208: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 209: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 210: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 211: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 212: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 213: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 214: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 215: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 216: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 217: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 218: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 219: */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 220: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 221: */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + /*}*/ + /*{*/ /* Char 222: */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + /*}*/ + /*{*/ /* Char 223: */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 224: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 225: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 226: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 227: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 228: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 229: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 230: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 231: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 232: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 233: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 234: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 235: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 236: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 237: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 238: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 239: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 240: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 241: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 242: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 243: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 244: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 245: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 246: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 247: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 248: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 249: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 250: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 251: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 252: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 253: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 254: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 255: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ +}; + +#endif diff --git a/include/video_font_data.h b/include/video_font_data.h index 4e544f0d7..346a162f5 100644 --- a/include/video_font_data.h +++ b/include/video_font_data.h @@ -8,7 +8,12 @@ #ifndef _VIDEO_FONT_DATA_ #define _VIDEO_FONT_DATA_ -static unsigned char video_fontdata[VIDEO_FONT_SIZE] = { +#define VIDEO_FONT_CHARS 256 +#define VIDEO_FONT_WIDTH 8 +#define VIDEO_FONT_HEIGHT 16 +#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) + +static unsigned char __maybe_unused video_fontdata[VIDEO_FONT_SIZE] = { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/tools/bmp_logo.c b/tools/bmp_logo.c index b2ad3d592..2247adcc8 100644 --- a/tools/bmp_logo.c +++ b/tools/bmp_logo.c @@ -179,7 +179,7 @@ int main (int argc, char *argv[]) printf("unsigned char bmp_logo_bitmap[] = {\n"); for (i=(b->height-1)*b->width; i>=0; i-=b->width) { for (x = 0; x < b->width; x++) { - b->data[(uint16_t) i + x] = (uint8_t) fgetc (fp) \ + b->data[i + x] = (uint8_t) fgetc(fp) + DEFAULT_CMAP_SIZE; } } |