diff options
| -rw-r--r-- | arch/arm/cpu/armv7/nonsec_virt.S | 18 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/virt-v7.c | 20 | ||||
| -rw-r--r-- | common/cmd_ext2.c | 5 | ||||
| -rw-r--r-- | common/cmd_ext4.c | 5 | ||||
| -rw-r--r-- | common/cmd_fat.c | 5 | ||||
| -rw-r--r-- | common/cmd_fs.c | 6 | ||||
| -rw-r--r-- | common/cmd_mtdparts.c | 7 | ||||
| -rw-r--r-- | doc/README.JFFS2_NAND | 2 | ||||
| -rw-r--r-- | drivers/pci/pci_auto.c | 2 | ||||
| -rw-r--r-- | drivers/power/power_core.c | 19 | ||||
| -rw-r--r-- | fs/fs.c | 16 | ||||
| -rw-r--r-- | include/fs.h | 4 | ||||
| -rw-r--r-- | include/linux/fb.h | 1 | 
13 files changed, 38 insertions, 72 deletions
| diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 358348ffa..24b4c18bd 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -3,23 +3,7 @@   *   * Copyright (c) 2013	Andre Przywara <andre.przywara@linaro.org>   * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier:	GPL-2.0+   */  #include <config.h> diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c index 6de7fe781..2cd604f97 100644 --- a/arch/arm/cpu/armv7/virt-v7.c +++ b/arch/arm/cpu/armv7/virt-v7.c @@ -1,28 +1,12 @@  /*   * (C) Copyright 2013 - * Andre Przywara, Linaro + * Andre Przywara, Linaro <andre.przywara@linaro.org>   *   * Routines to transition ARMv7 processors from secure into non-secure state   * and from non-secure SVC into HYP mode   * needed to enable ARMv7 virtualization for current hypervisors   * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier:	GPL-2.0+   */  #include <common.h> diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 173191980..5a4bcc1a3 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -32,7 +32,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])   */  int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])  { -	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16); +	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT);  }  U_BOOT_CMD( @@ -47,6 +47,5 @@ U_BOOT_CMD(  	"load binary file from a Ext2 filesystem",  	"<interface> <dev[:part]> [addr] [filename] [bytes]\n"  	"    - load binary file 'filename' from 'dev' on 'interface'\n" -	"      to address 'addr' from ext2 filesystem.\n" -	"      All numeric parameters are assumed to be hex." +	"      to address 'addr' from ext2 filesystem."  ); diff --git a/common/cmd_ext4.c b/common/cmd_ext4.c index 4a27cd97c..8289d25b0 100644 --- a/common/cmd_ext4.c +++ b/common/cmd_ext4.c @@ -45,7 +45,7 @@  int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc,  						char *const argv[])  { -	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16); +	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT);  }  int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) @@ -122,5 +122,4 @@ U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,  	   "load binary file from a Ext4 filesystem",  	   "<interface> <dev[:part]> [addr] [filename] [bytes]\n"  	   "    - load binary file 'filename' from 'dev' on 'interface'\n" -	   "      to address 'addr' from ext4 filesystem.\n" -	   "      All numeric parameters are assumed to be hex."); +	   "      to address 'addr' from ext4 filesystem"); diff --git a/common/cmd_fat.c b/common/cmd_fat.c index f6d7affa0..a12d8fa09 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -19,7 +19,7 @@  int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])  { -	return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT, 16); +	return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT);  } @@ -35,8 +35,7 @@ U_BOOT_CMD(  	"      the load stops on end of file.\n"  	"      If either 'pos' or 'bytes' are not aligned to\n"  	"      ARCH_DMA_MINALIGN then a misaligned buffer warning will\n" -	"      be printed and performance will suffer for the load.\n" -	"      All numeric parameters are assumed to be hex." +	"      be printed and performance will suffer for the load."  );  static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/common/cmd_fs.c b/common/cmd_fs.c index a681d03d1..91a205ac1 100644 --- a/common/cmd_fs.c +++ b/common/cmd_fs.c @@ -22,7 +22,7 @@  int do_load_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])  { -	return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY, 0); +	return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY);  }  U_BOOT_CMD( @@ -34,9 +34,7 @@ U_BOOT_CMD(  	"      'bytes' gives the size to load in bytes.\n"  	"      If 'bytes' is 0 or omitted, the file is read until the end.\n"  	"      'pos' gives the file byte position to start reading from.\n" -	"      If 'pos' is 0 or omitted, the file is read from the start.\n" -	"      All numeric parameters are assumed to be decimal,\n" -	"      unless specified otherwise using a leading \"0x\"." +	"      If 'pos' is 0 or omitted, the file is read from the start."  );  int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 38a6e6d07..f791372de 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -381,10 +381,9 @@ static int part_validate_eraseblock(struct mtdids *id, struct part_info *part)  /** - * Performs sanity check for supplied partition. Offset and size are verified - * to be within valid range. Partition type is checked and either - * parts_validate_nor() or parts_validate_nand() is called with the argument - * of part. + * Performs sanity check for supplied partition. Offset and size are + * verified to be within valid range. Partition type is checked and + * part_validate_eraseblock() is called with the argument of part.   *   * @param id of the parent device   * @param part partition to validate diff --git a/doc/README.JFFS2_NAND b/doc/README.JFFS2_NAND index 5018ae834..09788d534 100644 --- a/doc/README.JFFS2_NAND +++ b/doc/README.JFFS2_NAND @@ -1,6 +1,6 @@  JFFS2 NAND support: -To ebable, use the following #define in the board configuration file: +To enable, use the following #define in the board configuration file:  #define CONFIG_JFFS2_NAND 1 diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index c4ed8ba6c..86ba6b523 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -297,7 +297,7 @@ void pciauto_config_init(struct pci_controller *hose)  {  	int i; -	hose->pci_io = hose->pci_mem = NULL; +	hose->pci_io = hose->pci_mem = hose->pci_prefetch = NULL;  	for (i = 0; i < hose->region_count; i++) {  		switch(hose->regions[i].flags) { diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c index d79971ba8..29ccc831a 100644 --- a/drivers/power/power_core.c +++ b/drivers/power/power_core.c @@ -184,18 +184,21 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])  		if (argc < 4)  			return CMD_RET_USAGE; +		if (!p->pbat) { +			printf("%s is not a battery\n", p->name); +			return CMD_RET_FAILURE; +		} +  		if (strcmp(argv[3], "state") == 0)  			p->fg->fg_battery_check(p->pbat->fg, p);  		if (strcmp(argv[3], "charge") == 0) { -			if (p->pbat) { -				printf("BAT: %s charging (ctrl+c to break)\n", -				       p->name); -				if (p->low_power_mode) -					p->low_power_mode(); -				if (p->pbat->battery_charge) -					p->pbat->battery_charge(p); -			} +			printf("BAT: %s charging (ctrl+c to break)\n", +			       p->name); +			if (p->low_power_mode) +				p->low_power_mode(); +			if (p->pbat->battery_charge) +				p->pbat->battery_charge(p);  		}  		return CMD_RET_SUCCESS; @@ -231,7 +231,7 @@ int fs_write(const char *filename, ulong addr, int offset, int len)  }  int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], -		int fstype, int cmdline_base) +		int fstype)  {  	unsigned long addr;  	const char *addr_str; @@ -250,7 +250,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],  		return 1;  	if (argc >= 4) { -		addr = simple_strtoul(argv[3], NULL, cmdline_base); +		addr = simple_strtoul(argv[3], NULL, 16);  	} else {  		addr_str = getenv("loadaddr");  		if (addr_str != NULL) @@ -268,11 +268,11 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],  		}  	}  	if (argc >= 6) -		bytes = simple_strtoul(argv[5], NULL, cmdline_base); +		bytes = simple_strtoul(argv[5], NULL, 16);  	else  		bytes = 0;  	if (argc >= 7) -		pos = simple_strtoul(argv[6], NULL, cmdline_base); +		pos = simple_strtoul(argv[6], NULL, 16);  	else  		pos = 0; @@ -313,7 +313,7 @@ int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],  }  int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], -		int fstype, int cmdline_base) +		int fstype)  {  	unsigned long addr;  	const char *filename; @@ -329,10 +329,10 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],  		return 1;  	filename = argv[3]; -	addr = simple_strtoul(argv[4], NULL, cmdline_base); -	bytes = simple_strtoul(argv[5], NULL, cmdline_base); +	addr = simple_strtoul(argv[4], NULL, 16); +	bytes = simple_strtoul(argv[5], NULL, 16);  	if (argc >= 7) -		pos = simple_strtoul(argv[6], NULL, cmdline_base); +		pos = simple_strtoul(argv[6], NULL, 16);  	else  		pos = 0; diff --git a/include/fs.h b/include/fs.h index c837bae25..7d9403ed8 100644 --- a/include/fs.h +++ b/include/fs.h @@ -59,10 +59,10 @@ int fs_read(const char *filename, ulong addr, int offset, int len);   * to a specific filesystem type via the fstype parameter.   */  int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], -		int fstype, int cmdline_base); +		int fstype);  int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],  		int fstype);  int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], -		int fstype, int cmdline_base); +		int fstype);  #endif /* _FS_H */ diff --git a/include/linux/fb.h b/include/linux/fb.h index 3858f8f80..111372c9f 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -2,6 +2,7 @@  #define _LINUX_FB_H  #include <linux/types.h> +#include <linux/list.h>  /* Definitions of frame buffers						*/ |