summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS4
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile3
-rw-r--r--board/dbau1x00/dbau1x00.c2
-rw-r--r--board/gth2/gth2.c2
-rw-r--r--board/pb1x00/pb1x00.c2
-rw-r--r--board/qemu-mips/qemu-mips.c6
-rw-r--r--board/quad100hd/Makefile51
-rw-r--r--board/quad100hd/config.mk24
-rw-r--r--board/quad100hd/nand.c79
-rw-r--r--board/quad100hd/quad100hd.c93
-rw-r--r--board/quad100hd/u-boot.lds133
-rw-r--r--common/cmd_nand.c2
-rw-r--r--common/env_nand.c3
-rw-r--r--cpu/mips/cpu.c10
-rw-r--r--drivers/mtd/nand/nand_util.c7
-rw-r--r--fs/jffs2/jffs2_1pass.c3
-rw-r--r--include/asm-mips/errno.h143
-rw-r--r--include/asm-mips/mipsregs.h1379
-rw-r--r--include/configs/quad100hd.h298
-rw-r--r--include/linux/mtd/nand.h4
-rw-r--r--include/onenand_uboot.h5
-rw-r--r--lib_arm/board.c10
-rw-r--r--lib_mips/board.c13
-rw-r--r--lib_ppc/board.c4
-rw-r--r--lib_sh/board.c2
26 files changed, 1971 insertions, 312 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 2d8fd58d1..d608a6bac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -204,6 +204,10 @@ Klaus Heydeck <heydeck@kieback-peter.de>
KUP4K MPC855
KUP4X MPC859
+Gary Jennejohn <garyj@denx.de>
+
+ quad100hd PPC405EP
+
Murray Jensen <Murray.Jensen@csiro.au>
cogent_mpc8xx MPC8xx
diff --git a/MAKEALL b/MAKEALL
index f40de2333..aad681ffe 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -219,6 +219,7 @@ LIST_4xx=" \
PMC405 \
PMC440 \
PPChameleonEVB \
+ quad100hd \
rainier \
sbc405 \
sc3 \
diff --git a/Makefile b/Makefile
index 154e5922a..543c57bc4 100644
--- a/Makefile
+++ b/Makefile
@@ -1391,6 +1391,9 @@ PPChameleonEVB_HI_33_config: unconfig
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+quad100hd_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index a13eeeb12..1be72a2dd 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -52,7 +52,7 @@ int checkboard (void)
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index 6da80dc75..9bc4d3fe5 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -135,7 +135,7 @@ int checkboard (void)
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 536c9544f..82b723520 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -51,7 +51,7 @@ int checkboard (void)
*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
switch (proc_id >> 24) {
case 0:
diff --git a/board/qemu-mips/qemu-mips.c b/board/qemu-mips/qemu-mips.c
index 68690743d..6e6eab277 100644
--- a/board/qemu-mips/qemu-mips.c
+++ b/board/qemu-mips/qemu-mips.c
@@ -38,7 +38,7 @@ int checkboard(void)
u32 proc_id;
u32 config1;
- proc_id = read_32bit_cp0_register(CP0_PRID);
+ proc_id = read_c0_prid();
printf("Board: Qemu -M mips CPU: ");
switch (proc_id) {
case 0x00018000:
@@ -51,7 +51,7 @@ int checkboard(void)
printf("4KEc");
break;
case 0x00019300:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("24Kf");
else
@@ -64,7 +64,7 @@ int checkboard(void)
printf("R4000");
break;
case 0x00018100:
- config1 = read_mips32_cp0_config1();
+ config1 = read_c0_config1();
if (config1 & 1)
printf("5Kf");
else
diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile
new file mode 100644
index 000000000..252ad5a45
--- /dev/null
+++ b/board/quad100hd/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o nand.o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/quad100hd/config.mk b/board/quad100hd/config.mk
new file mode 100644
index 000000000..1bdf5e4fc
--- /dev/null
+++ b/board/quad100hd/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
new file mode 100644
index 000000000..a36b89dd7
--- /dev/null
+++ b/board/quad100hd/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#if defined(CONFIG_CMD_NAND)
+#include <asm/gpio.h>
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch(cmd) {
+ case NAND_CTL_SETCLE:
+ gpio_write_bit(CFG_NAND_CLE, 1);
+ break;
+ case NAND_CTL_CLRCLE:
+ gpio_write_bit(CFG_NAND_CLE, 0);
+ break;
+
+ case NAND_CTL_SETALE:
+ gpio_write_bit(CFG_NAND_ALE, 1);
+ break;
+ case NAND_CTL_CLRALE:
+ gpio_write_bit(CFG_NAND_ALE, 0);
+ break;
+
+ case NAND_CTL_SETNCE:
+ gpio_write_bit(CFG_NAND_CE, 0);
+ break;
+ case NAND_CTL_CLRNCE:
+ gpio_write_bit(CFG_NAND_CE, 1);
+ break;
+ }
+}
+
+static int quad100hd_nand_ready(struct mtd_info *mtd)
+{
+ return gpio_read_in_bit(CFG_NAND_RDY);
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ /* Set address of hardware control function */
+ nand->hwcontrol = quad100hd_hwcontrol;
+ nand->dev_ready = quad100hd_nand_ready;
+ nand->eccmode = NAND_ECC_SOFT;
+ /* 15 us command delay time */
+ nand->chip_delay = 20;
+
+ /* Return happy */
+ return 0;
+}
+#endif /* CONFIG_CMD_NAND */
diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c
new file mode 100644
index 000000000..638bd6ca2
--- /dev/null
+++ b/board/quad100hd/quad100hd.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on board/icecube/icecube.c from PPCBoot
+ * (C) Copyright 2003 Intrinsyc Software
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /* taken from PPCBoot */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000);
+ mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */
+ mtdcr(uictr, 0x00000000); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+
+ mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+#ifdef DISPLAY_BOARD_INFO
+ sys_info_t sysinfo;
+#endif
+
+ puts("Board: Quad100hd");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+#ifdef DISPLAY_BOARD_INFO
+ /* taken from ppcboot */
+ get_sys_info(&sysinfo);
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv *
+ 1000000));
+ printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+#endif
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ return CFG_SDRAM_SIZE;
+}
diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds
new file mode 100644
index 000000000..195d91b71
--- /dev/null
+++ b/board/quad100hd/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 37eb41b20..37198d21e 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -37,8 +37,6 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
u8 *part_num, struct part_info **part);
#endif
-extern nand_info_t nand_info[]; /* info for NAND chips */
-
static int nand_dump_oob(nand_info_t *nand, ulong off)
{
return 0;
diff --git a/common/env_nand.c b/common/env_nand.c
index 70d05ad15..3a98d2b94 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -57,9 +57,6 @@ int nand_legacy_rw (struct nand_chip* nand, int cmd,
size_t start, size_t len,
size_t * retlen, u_char * buf);
-/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
-extern nand_info_t nand_info[];
-
/* references to names in env_common.c */
extern uchar default_environment[];
extern int default_environment_size;
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index e267bba46..0f58d25b8 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -66,10 +66,10 @@ void flush_cache(ulong start_addr, ulong size)
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
{
- write_32bit_cp0_register(CP0_ENTRYLO0, low0);
- write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
- write_32bit_cp0_register(CP0_ENTRYLO1, low1);
- write_32bit_cp0_register(CP0_ENTRYHI, hi);
- write_32bit_cp0_register(CP0_INDEX, index);
+ write_c0_entrylo0(low0);
+ write_c0_pagemask(pagemask);
+ write_c0_entrylo1(low1);
+ write_c0_entryhi(hi);
+ write_c0_index(index);
tlb_write_indexed();
}
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 6c5624a49..c82f77b55 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -153,6 +153,13 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
priv_nand->bbt = NULL;
}
+ if (erase_length < meminfo->erasesize) {
+ printf("Warning: Erase size 0x%08x smaller than one " \
+ "erase block 0x%08x\n",erase_length, meminfo->erasesize);
+ printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
+ erase_length = meminfo->erasesize;
+ }
+
for (;
erase.addr < opts->offset + erase_length;
erase.addr += meminfo->erasesize) {
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 1993dc235..7e27ee18a 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -164,9 +164,6 @@ static struct part_info *current_part;
/* this one defined in nand_legacy.c */
int read_jffs2_nand(size_t start, size_t len,
size_t * retlen, u_char * buf, int nanddev);
-#else
-/* info for NAND chips, defined in drivers/mtd/nand/nand.c */
-extern nand_info_t nand_info[];
#endif
#define NAND_PAGE_SIZE 512
diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h
new file mode 100644
index 000000000..1665a63a8
--- /dev/null
+++ b/include/asm-mips/errno.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MIPS_ERRNO_H
+#define _ASM_MIPS_ERRNO_H
+
+/*
+ * These first 34 error codes are from Linux 2.6, <asm-generic/errno-base.h>
+ */
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Argument list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EDOTDOT 73 /* RFS specific error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define EBADMSG 77 /* Not a data message */
+#define ENAMETOOLONG 78 /* File name too long */
+#define EOVERFLOW 79 /* Value too large for defined data type */
+#define ENOTUNIQ 80 /* Name not unique on network */
+#define EBADFD 81 /* File descriptor in bad state */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can not access a needed shared library */
+#define ELIBBAD 84 /* Accessing a corrupted shared library */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 87 /* Cannot exec a shared library directly */
+#define EILSEQ 88 /* Illegal byte sequence */
+#define ENOSYS 89 /* Function not implemented */
+#define ELOOP 90 /* Too many symbolic links encountered */
+#define ERESTART 91 /* Interrupted system call should be restarted */
+#define ESTRPIPE 92 /* Streams pipe error */
+#define ENOTEMPTY 93 /* Directory not empty */
+#define EUSERS 94 /* Too many users */
+#define ENOTSOCK 95 /* Socket operation on non-socket */
+#define EDESTADDRREQ 96 /* Destination address required */
+#define EMSGSIZE 97 /* Message too long */
+#define EPROTOTYPE 98 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 99 /* Protocol not available */
+#define EPROTONOSUPPORT 120 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
+#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 123 /* Protocol family not supported */
+#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
+#define EADDRINUSE 125 /* Address already in use */
+#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
+#define ENETDOWN 127 /* Network is down */
+#define ENETUNREACH 128 /* Network is unreachable */
+#define ENETRESET 129 /* Network dropped connection because of reset */
+#define ECONNABORTED 130 /* Software caused connection abort */
+#define ECONNRESET 131 /* Connection reset by peer */
+#define ENOBUFS 132 /* No buffer space available */
+#define EISCONN 133 /* Transport endpoint is already connected */
+#define ENOTCONN 134 /* Transport endpoint is not connected */
+#define EUCLEAN 135 /* Structure needs cleaning */
+#define ENOTNAM 137 /* Not a XENIX named type file */
+#define ENAVAIL 138 /* No XENIX semaphores available */
+#define EISNAM 139 /* Is a named type file */
+#define EREMOTEIO 140 /* Remote I/O error */
+#define EINIT 141 /* Reserved */
+#define EREMDEV 142 /* Error 142 */
+#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 144 /* Too many references: cannot splice */
+#define ETIMEDOUT 145 /* Connection timed out */
+#define ECONNREFUSED 146 /* Connection refused */
+#define EHOSTDOWN 147 /* Host is down */
+#define EHOSTUNREACH 148 /* No route to host */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EALREADY 149 /* Operation already in progress */
+#define EINPROGRESS 150 /* Operation now in progress */
+#define ESTALE 151 /* Stale NFS file handle */
+#define ECANCELED 158 /* AIO operation canceled */
+
+#endif /* _ASM_MIPS_ERRNO_H */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 61a0dac1c..be7e5c65e 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -7,8 +7,8 @@
* Copyright (C) 2000 Silicon Graphics, Inc.
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
@@ -29,6 +29,15 @@
#endif
/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
* Coprocessor 0 register names
*/
#define CP0_INDEX $0
@@ -55,12 +64,15 @@
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
/*
* R4640/R4650 cp0 register names. These registers are listed
@@ -82,11 +94,27 @@
#define CP0_S1_DERRADDR0 $26
#define CP0_S1_DERRADDR1 $27
#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
+ * TX39 Series
+ */
+#define CP0_TX39_CACHE $7
+
/*
* Coprocessor 1 (FPU) register names
*/
-#define CP1_REVISION $0
-#define CP1_STATUS $31
+#define CP1_REVISION $0
+#define CP1_STATUS $31
/*
* FPU Status Register Values
@@ -95,230 +123,113 @@
* Status Register Values
*/
-#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
-#define FPU_CSR_COND 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
-#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
-#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
-#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
-#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
-#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
-#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
-#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
/*
* X the exception cause indicator
* E the exception enable
* S the sticky/flag bit
-*/
-#define FPU_CSR_ALL_X 0x0003f000
-#define FPU_CSR_UNI_X 0x00020000
-#define FPU_CSR_INV_X 0x00010000
-#define FPU_CSR_DIV_X 0x00008000
-#define FPU_CSR_OVF_X 0x00004000
-#define FPU_CSR_UDF_X 0x00002000
-#define FPU_CSR_INE_X 0x00001000
+ */
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
-#define FPU_CSR_ALL_E 0x00000f80
-#define FPU_CSR_INV_E 0x00000800
-#define FPU_CSR_DIV_E 0x00000400
-#define FPU_CSR_OVF_E 0x00000200
-#define FPU_CSR_UDF_E 0x00000100
-#define FPU_CSR_INE_E 0x00000080
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
-#define FPU_CSR_ALL_S 0x0000007c
-#define FPU_CSR_INV_S 0x00000040
-#define FPU_CSR_DIV_S 0x00000020
-#define FPU_CSR_OVF_S 0x00000010
-#define FPU_CSR_UDF_S 0x00000008
-#define FPU_CSR_INE_S 0x00000004
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
/* rounding mode */
-#define FPU_CSR_RN 0x0 /* nearest */
-#define FPU_CSR_RZ 0x1 /* towards zero */
-#define FPU_CSR_RU 0x2 /* towards +Infinity */
-#define FPU_CSR_RD 0x3 /* towards -Infinity */
-
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
/*
* Values for PageMask register
*/
-#include <linux/config.h>
#ifdef CONFIG_CPU_VR41XX
-#define PM_1K 0x00000000
-#define PM_4K 0x00001800
-#define PM_16K 0x00007800
-#define PM_64K 0x0001f800
-#define PM_256K 0x0007f800
-#else
-#define PM_4K 0x00000000
-#define PM_16K 0x00006000
-#define PM_64K 0x0001e000
-#define PM_256K 0x0007e000
-#define PM_1M 0x001fe000
-#define PM_4M 0x007fe000
-#define PM_16M 0x01ffe000
-#endif
-
-/*
- * Values used for computation of new tlb entries
- */
-#define PL_4K 12
-#define PL_16K 14
-#define PL_64K 16
-#define PL_256K 18
-#define PL_1M 20
-#define PL_4M 22
-#define PL_16M 24
-
-/*
- * Macros to access the system control coprocessor
- */
-#define read_32bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "mfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
-#define read_32bit_cp0_set1_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tpush\n\t" \
- ".set\treorder\n\t" \
- "cfc0\t%0,"STR(source)"\n\t" \
- ".set\tpop" \
- : "=r" (__res)); \
- __res;})
+/* Why doesn't stupidity hurt ... */
-/*
- * For now use this only with interrupts disabled!
- */
-#define read_64bit_cp0_register(source) \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmfc0\t%0,"STR(source)"\n\t" \
- ".set\tmips0" \
- : "=r" (__res)); \
- __res;})
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
-#define write_32bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- "mtc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
+#else
-#define write_32bit_cp0_set1_register(register,value) \
- __asm__ __volatile__( \
- "ctc0\t%0,"STR(register)"\n\t" \
- "nop" \
- : : "r" (value));
+#define PM_4K 0x00000000
+#define PM_16K 0x00006000
+#define PM_64K 0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M 0x001fe000
+#define PM_4M 0x007fe000
+#define PM_16M 0x01ffe000
+#define PM_64M 0x07ffe000
+#define PM_256M 0x1fffe000
-#define write_64bit_cp0_register(register,value) \
- __asm__ __volatile__( \
- ".set\tmips3\n\t" \
- "dmtc0\t%0,"STR(register)"\n\t" \
- ".set\tmips0" \
- : : "r" (value))
+#endif
/*
- * This should be changed when we get a compiler that support the MIPS32 ISA.
+ * Values used for computation of new tlb entries
*/
-#define read_mips32_cp0_config1() \
-({ int __res; \
- __asm__ __volatile__( \
- ".set\tnoreorder\n\t" \
- ".set\tnoat\n\t" \
- ".word\t0x40018001\n\t" \
- "move\t%0,$1\n\t" \
- ".set\tat\n\t" \
- ".set\treorder" \
- :"=r" (__res)); \
- __res;})
-
-#define tlb_write_indexed() \
- __asm__ __volatile__( \
- ".set noreorder\n\t" \
- "tlbwi\n\t" \
-".set reorder")
+#define PL_4K 12
+#define PL_16K 14
+#define PL_64K 16
+#define PL_256K 18
+#define PL_1M 20
+#define PL_4M 22
+#define PL_16M 24
+#define PL_64M 26
+#define PL_256M 28
/*
* R4x00 interrupt enable / cause bits
*/
-#define IE_SW0 (1<< 8)
-#define IE_SW1 (1<< 9)
-#define IE_IRQ0 (1<<10)
-#define IE_IRQ1 (1<<11)
-#define IE_IRQ2 (1<<12)
-#define IE_IRQ3 (1<<13)
-#define IE_IRQ4 (1<<14)
-#define IE_IRQ5 (1<<15)
+#define IE_SW0 (_ULCAST_(1) << 8)
+#define IE_SW1 (_ULCAST_(1) << 9)
+#define IE_IRQ0 (_ULCAST_(1) << 10)
+#define IE_IRQ1 (_ULCAST_(1) << 11)
+#define IE_IRQ2 (_ULCAST_(1) << 12)
+#define IE_IRQ3 (_ULCAST_(1) << 13)
+#define IE_IRQ4 (_ULCAST_(1) << 14)
+#define IE_IRQ5 (_ULCAST_(1) << 15)
/*
* R4x00 interrupt cause bits
*/
-#define C_SW0 (1<< 8)
-#define C_SW1 (1<< 9)
-#define C_IRQ0 (1<<10)
-#define C_IRQ1 (1<<11)
-#define C_IRQ2 (1<<12)
-#define C_IRQ3 (1<<13)
-#define C_IRQ4 (1<<14)
-#define C_IRQ5 (1<<15)
-
-#ifndef _LANGUAGE_ASSEMBLY
-/*
- * Manipulate the status register.
- * Mostly used to access the interrupt bits.
- */
-#define __BUILD_SET_CP0(name,register) \
-extern __inline__ unsigned int \
-set_cp0_##name(unsigned int set) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res |= set; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-clear_cp0_##name(unsigned int clear) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~clear; \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-} \
- \
-extern __inline__ unsigned int \
-change_cp0_##name(unsigned int change, unsigned int new) \
-{ \
- unsigned int res; \
- \
- res = read_32bit_cp0_register(register); \
- res &= ~change; \
- res |= (new & change); \
- if(change) \
- write_32bit_cp0_register(register, res); \
- \
- return res; \
-}
-
-__BUILD_SET_CP0(status,CP0_STATUS)
-__BUILD_SET_CP0(cause,CP0_CAUSE)
-__BUILD_SET_CP0(config,CP0_CONFIG)
-
-#endif /* defined (_LANGUAGE_ASSEMBLY) */
+#define C_SW0 (_ULCAST_(1) << 8)
+#define C_SW1 (_ULCAST_(1) << 9)
+#define C_IRQ0 (_ULCAST_(1) << 10)
+#define C_IRQ1 (_ULCAST_(1) << 11)
+#define C_IRQ2 (_ULCAST_(1) << 12)
+#define C_IRQ3 (_ULCAST_(1) << 13)
+#define C_IRQ4 (_ULCAST_(1) << 14)
+#define C_IRQ5 (_ULCAST_(1) << 15)
/*
* Bitfields in the R4xx0 cp0 status register
@@ -337,9 +248,16 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
#define ST0_CE 0x00020000
/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace. This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO 0x08000000
+
+/*
* Bitfields in the R[23]000 cp0 status register.
*/
-#define ST0_IEC 0x00000001
+#define ST0_IEC 0x00000001
#define ST0_KUC 0x00000002
#define ST0_IEP 0x00000004
#define ST0_KUP 0x00000008
@@ -353,9 +271,14 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
/*
* Bits specific to the R4640/R4650
*/
-#define ST0_UM (1 << 4)
-#define ST0_IL (1 << 23)
-#define ST0_DL (1 << 24)
+#define ST0_UM (_ULCAST_(1) << 4)
+#define ST0_IL (_ULCAST_(1) << 23)
+#define ST0_DL (_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX 0x01000000
/*
* Bitfields in the TX39 family CP0 Configuration Register 3
@@ -395,39 +318,40 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
*/
#define ST0_IM 0x0000ff00
#define STATUSB_IP0 8
-#define STATUSF_IP0 (1 << 8)
+#define STATUSF_IP0 (_ULCAST_(1) << 8)
#define STATUSB_IP1 9
-#define STATUSF_IP1 (1 << 9)
+#define STATUSF_IP1 (_ULCAST_(1) << 9)
#define STATUSB_IP2 10
-#define STATUSF_IP2 (1 << 10)
+#define STATUSF_IP2 (_ULCAST_(1) << 10)
#define STATUSB_IP3 11
-#define STATUSF_IP3 (1 << 11)
+#define STATUSF_IP3 (_ULCAST_(1) << 11)
#define STATUSB_IP4 12
-#define STATUSF_IP4 (1 << 12)
+#define STATUSF_IP4 (_ULCAST_(1) << 12)
#define STATUSB_IP5 13
-#define STATUSF_IP5 (1 << 13)
+#define STATUSF_IP5 (_ULCAST_(1) << 13)
#define STATUSB_IP6 14
-#define STATUSF_IP6 (1 << 14)
+#define STATUSF_IP6 (_ULCAST_(1) << 14)
#define STATUSB_IP7 15
-#define STATUSF_IP7 (1 << 15)
+#define STATUSF_IP7 (_ULCAST_(1) << 15)
#define STATUSB_IP8 0
-#define STATUSF_IP8 (1 << 0)
+#define STATUSF_IP8 (_ULCAST_(1) << 0)
#define STATUSB_IP9 1
-#define STATUSF_IP9 (1 << 1)
+#define STATUSF_IP9 (_ULCAST_(1) << 1)
#define STATUSB_IP10 2
-#define STATUSF_IP10 (1 << 2)
+#define STATUSF_IP10 (_ULCAST_(1) << 2)
#define STATUSB_IP11 3
-#define STATUSF_IP11 (1 << 3)
+#define STATUSF_IP11 (_ULCAST_(1) << 3)
#define STATUSB_IP12 4
-#define STATUSF_IP12 (1 << 4)
+#define STATUSF_IP12 (_ULCAST_(1) << 4)
#define STATUSB_IP13 5
-#define STATUSF_IP13 (1 << 5)
+#define STATUSF_IP13 (_ULCAST_(1) << 5)
#define STATUSB_IP14 6
-#define STATUSF_IP14 (1 << 6)
+#define STATUSF_IP14 (_ULCAST_(1) << 6)
#define STATUSB_IP15 7
-#define STATUSF_IP15 (1 << 7)
+#define STATUSF_IP15 (_ULCAST_(1) << 7)
#define ST0_CH 0x00040000
#define ST0_SR 0x00100000
+#define ST0_TS 0x00200000
#define ST0_BEV 0x00400000
#define ST0_RE 0x02000000
#define ST0_FR 0x04000000
@@ -444,35 +368,36 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
* Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
*/
#define CAUSEB_EXCCODE 2
-#define CAUSEF_EXCCODE (31 << 2)
+#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
#define CAUSEB_IP 8
-#define CAUSEF_IP (255 << 8)
+#define CAUSEF_IP (_ULCAST_(255) << 8)
#define CAUSEB_IP0 8
-#define CAUSEF_IP0 (1 << 8)
+#define CAUSEF_IP0 (_ULCAST_(1) << 8)
#define CAUSEB_IP1 9
-#define CAUSEF_IP1 (1 << 9)
+#define CAUSEF_IP1 (_ULCAST_(1) << 9)
#define CAUSEB_IP2 10
-#define CAUSEF_IP2 (1 << 10)
+#define CAUSEF_IP2 (_ULCAST_(1) << 10)
#define CAUSEB_IP3 11
-#define CAUSEF_IP3 (1 << 11)
+#define CAUSEF_IP3 (_ULCAST_(1) << 11)
#define CAUSEB_IP4 12
-#define CAUSEF_IP4 (1 << 12)
+#define CAUSEF_IP4 (_ULCAST_(1) << 12)
#define CAUSEB_IP5 13
-#define CAUSEF_IP5 (1 << 13)
+#define CAUSEF_IP5 (_ULCAST_(1) << 13)
#define CAUSEB_IP6 14
-#define CAUSEF_IP6 (1 << 14)
+#define CAUSEF_IP6 (_ULCAST_(1) << 14)
#define CAUSEB_IP7 15
-#define CAUSEF_IP7 (1 << 15)
+#define CAUSEF_IP7 (_ULCAST_(1) << 15)
#define CAUSEB_IV 23
-#define CAUSEF_IV (1 << 23)
+#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
-#define CAUSEF_CE (3 << 28)
+#define CAUSEF_CE (_ULCAST_(3) << 28)
#define CAUSEB_BD 31
-#define CAUSEF_BD (1 << 31)
+#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
- * Bits in the coprozessor 0 config register.
+ * Bits in the coprocessor 0 config register.
*/
+/* Generic bits. */
#define CONF_CM_CACHABLE_NO_WA 0
#define CONF_CM_CACHABLE_WA 1
#define CONF_CM_UNCACHED 2
@@ -482,66 +407,958 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
#define CONF_CM_CACHABLE_CUW 6
#define CONF_CM_CACHABLE_ACCELERATED 7
#define CONF_CM_CMASK 7
-#define CONF_DB (1 << 4)
-#define CONF_IB (1 << 5)
-#define CONF_SC (1 << 17)
-#define CONF_AC (1 << 23)
-#define CONF_HALT (1 << 25)
+#define CONF_BE (_ULCAST_(1) << 15)
+
+/* Bits common to various processors. */
+#define CONF_CU (_ULCAST_(1) << 3)
+#define CONF_DB (_ULCAST_(1) << 4)
+#define CONF_IB (_ULCAST_(1) << 5)
+#define CONF_DC (_ULCAST_(7) << 6)
+#define CONF_IC (_ULCAST_(7) << 9)
+#define CONF_EB (_ULCAST_(1) << 13)
+#define CONF_EM (_ULCAST_(1) << 14)
+#define CONF_SM (_ULCAST_(1) << 16)
+#define CONF_SC (_ULCAST_(1) << 17)
+#define CONF_EW (_ULCAST_(3) << 18)
+#define CONF_EP (_ULCAST_(15)<< 24)
+#define CONF_EC (_ULCAST_(7) << 28)
+#define CONF_CM (_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0. */
+#define R4K_CONF_SW (_ULCAST_(1) << 20)
+#define R4K_CONF_SS (_ULCAST_(1) << 21)
+#define R4K_CONF_SB (_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000. */
+#define R5K_CONF_SE (_ULCAST_(1) << 12)
+#define R5K_CONF_SS (_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000. */
+#define R10K_CONF_DN (_ULCAST_(3) << 3)
+#define R10K_CONF_CT (_ULCAST_(1) << 5)
+#define R10K_CONF_PE (_ULCAST_(1) << 6)
+#define R10K_CONF_PM (_ULCAST_(3) << 7)
+#define R10K_CONF_EC (_ULCAST_(15)<< 9)
+#define R10K_CONF_SB (_ULCAST_(1) << 13)
+#define R10K_CONF_SK (_ULCAST_(1) << 14)
+#define R10K_CONF_SS (_ULCAST_(7) << 16)
+#define R10K_CONF_SC (_ULCAST_(7) << 19)
+#define R10K_CONF_DC (_ULCAST_(7) << 26)
+#define R10K_CONF_IC (_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx. */
+#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
+#define VR41_CONF_M16 (_ULCAST_(1) << 20)
+#define VR41_CONF_AD (_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx. */
+#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
+#define R30XX_CONF_REV (_ULCAST_(1) << 22)
+#define R30XX_CONF_AC (_ULCAST_(1) << 23)
+#define R30XX_CONF_RF (_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
+#define R30XX_CONF_SB (_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49. */
+#define TX49_CONF_DC (_ULCAST_(1) << 16)
+#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
+#define TX49_CONF_HALT (_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA. */
+#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_AR (_ULCAST_(7) << 10)
+#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
- * R10000 performance counter definitions.
- *
- * FIXME: The R10000 performance counter opens a nice way to implement CPU
- * time accounting with a precission of one cycle. I don't have
- * R10000 silicon but just a manual, so ...
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters. These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfpc\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntr(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtpc\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+#define read_r10k_perf_event(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfps\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntl(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtps\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel) \
+({ int __res; \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __read_64bit_c0_register(source, sel) \
+({ unsigned long long __res; \
+ if (sizeof(unsigned long) == 4) \
+ __res = __read_64bit_c0_split(source, sel); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0, " #source "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_register(register, sel, value) \
+do { \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mtc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_64bit_c0_split(register, sel, value); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%z0, " #register "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel) \
+ ((sizeof(unsigned long) == 4) ? \
+ (unsigned long) __read_32bit_c0_register(reg, sel) : \
+ (unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_32bit_c0_register(reg, sel, val); \
+ else \
+ __write_64bit_c0_register(reg, sel, val); \
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ "cfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_ctrl_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ "ctc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel. That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel) \
+({ \
+ unsigned long long __val; \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source ", " #sel "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
+ \
+ __val; \
+})
+
+#define __write_64bit_c0_split(source, sel, val) \
+do { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ local_irq_restore(__flags); \
+} while (0)
+
+#define read_c0_index() __read_32bit_c0_register($0, 0)
+#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+
+#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf() __read_32bit_c0_register($3, 0)
+#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context() __read_ulong_c0_register($4, 0)
+#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired() __read_32bit_c0_register($6, 0)
+#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info() __read_32bit_c0_register($7, 0)
+
+#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
+#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count() __read_32bit_c0_register($9, 0)
+#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare() __read_32bit_c0_register($11, 0)
+#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause() __read_32bit_c0_register($13, 0)
+#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc() __read_ulong_c0_register($14, 0)
+#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid() __read_32bit_c0_register($15, 0)
+
+#define read_c0_config() __read_32bit_c0_register($16, 0)
+#define read_c0_config1() __read_32bit_c0_register($16, 1)
+#define read_c0_config2() __read_32bit_c0_register($16, 2)
+#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
+#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register. There may be upto 8 of them.
*/
+#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register. There may be upto 8 of them.
+ */
+#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask() __read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag() __read_32bit_c0_register($22, 0)
+#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1() __read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2() __read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3() __read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4() __read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5() __read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug() __read_32bit_c0_register($23, 0)
+#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc() __read_ulong_c0_register($24, 0)
+#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc() __read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo() __read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi() __read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
/*
- * Events counted by counter #0
+ * Macros to access the floating point coprocessor control registers
*/
-#define CE0_CYCLES 0
-#define CE0_INSN_ISSUED 1
-#define CE0_LPSC_ISSUED 2
-#define CE0_S_ISSUED 3
-#define CE0_SC_ISSUED 4
-#define CE0_SC_FAILED 5
-#define CE0_BRANCH_DECODED 6
-#define CE0_QW_WB_SECONDARY 7
-#define CE0_CORRECTED_ECC_ERRORS 8
-#define CE0_ICACHE_MISSES 9
-#define CE0_SCACHE_I_MISSES 10
-#define CE0_SCACHE_I_WAY_MISSPREDICTED 11
-#define CE0_EXT_INTERVENTIONS_REQ 12
-#define CE0_EXT_INVALIDATE_REQ 13
-#define CE0_VIRTUAL_COHERENCY_COND 14
-#define CE0_INSN_GRADUATED 15
+#define read_32bit_cp1_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "cfc1\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 11) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
/*
- * Events counted by counter #1
+ * TLB operations.
+ *
+ * It is responsibility of the caller to take care of any TLB hazards.
*/
-#define CE1_CYCLES 0
-#define CE1_INSN_GRADUATED 1
-#define CE1_LPSC_GRADUATED 2
-#define CE1_S_GRADUATED 3
-#define CE1_SC_GRADUATED 4
-#define CE1_FP_INSN_GRADUATED 5
-#define CE1_QW_WB_PRIMARY 6
-#define CE1_TLB_REFILL 7
-#define CE1_BRANCH_MISSPREDICTED 8
-#define CE1_DCACHE_MISS 9
-#define CE1_SCACHE_D_MISSES 10
-#define CE1_SCACHE_D_WAY_MISSPREDICTED 11
-#define CE1_EXT_INTERVENTION_HITS 12
-#define CE1_EXT_INVALIDATE_REQ 13
-#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS 14
-#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS 15
+static inline void tlb_probe(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbp\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+#endif
+
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbr\n\t"
+ ".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+ if ((res & _ULCAST_(1)))
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwi\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwr\n\t"
+ ".set reorder");
+}
/*
- * These flags define in which priviledge mode the counters count events
+ * Manipulate bits in a c0 register.
*/
-#define CEB_USER 8 /* Count events in user mode, EXL = ERL = 0 */
-#define CEB_SUPERVISOR 4 /* Count events in supvervisor mode EXL = ERL = 0 */
-#define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
-#define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ \
+ return res; \
+}
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
#endif /* _ASM_MIPSREGS_H */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
new file mode 100644
index 000000000..622a5d4cc
--- /dev/null
+++ b/include/configs/quad100hd.h
@@ -0,0 +1,298 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * quad100hd.h - configuration for Quad100hd board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_405EP 1 /* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */
+#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */
+
+/* the environment is in the EEPROM by default */
+#define CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_FLASH
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0x01 /* PHY address */
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET 1
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_LOG
+#undef CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#undef CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1
+#define CFG_SDRAM_SIZE 0x02000000 /* 32 MB */
+
+/* FIX! SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 3 /* CAS latency */
+#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * JFFS2
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#ifdef CFG_KERNEL_IN_JFFS2
+#define CFG_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */
+#else /* kernel not in JFFS */
+#define CFG_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */
+#endif
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#define CFG_BASE_BAUD 691200
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */
+
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CFG_EEPROM_SIZE 0x2000
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (TEXT_BASE)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+/* the environment is located before u-boot */
+#define CFG_ENV_ADDR (TEXT_BASE - CFG_ENV_SECT_SIZE)
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE 0x400 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x00000000
+#define CFG_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */
+#endif
+
+/* partly from PPCBoot */
+/* NAND */
+#define CONFIG_NAND
+#ifdef CONFIG_NAND
+#define CFG_NAND_BASE 0x60000000
+#define CFG_NAND_CS 10 /* our CS is GPIO10 */
+#define CFG_NAND_RDY 23 /* our RDY is GPIO23 */
+#define CFG_NAND_CE 24 /* our CE is GPIO24 */
+#define CFG_NAND_CLE 31 /* our CLE is GPIO31 */
+#define CFG_NAND_ALE 30 /* our ALE is GPIO30 */
+#define NAND_MAX_CHIPS 1
+#define CFG_MAX_NAND_DEVICE 1
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+/* see ./cpu/ppc4xx/start.S */
+#define CFG_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ * Taken from PPCBoot board/icecube/icecube.h
+ */
+
+/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+#define CFG_EBC_PB0AP 0x04002480
+/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
+#define CFG_EBC_PB0CR 0xFFC5A000
+#define CFG_EBC_PB1AP 0x04005480
+#define CFG_EBC_PB1CR 0x60018000
+#define CFG_EBC_PB2AP 0x00000000
+#define CFG_EBC_PB2CR 0x00000000
+#define CFG_EBC_PB3AP 0x00000000
+#define CFG_EBC_PB3CR 0x00000000
+#define CFG_EBC_PB4AP 0x00000000
+#define CFG_EBC_PB4CR 0x00000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * Taken in part from PPCBoot board/icecube/icecube.h
+ */
+/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+#define CFG_GPIO0_OSRH 0x55555550
+#define CFG_GPIO0_OSRL 0x00000110
+#define CFG_GPIO0_ISR1H 0x00000000
+#define CFG_GPIO0_ISR1L 0x15555445
+#define CFG_GPIO0_TSRH 0x00000000
+#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TCR 0xFFFF8097
+#define CFG_GPIO0_ODR 0x00000000
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_IPADDR 192.168.1.67
+#define CONFIG_SERVERIP 192.168.1.50
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_LOADADDR 300000
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+
+#endif /* __CONFIG_H */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4cc4a7d1b..e2a25a60d 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -385,6 +385,10 @@ struct nand_manufacturers {
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
+#ifndef NAND_MAX_CHIPS
+#define NAND_MAX_CHIPS 8
+#endif
+
/**
* struct nand_bbt_descr - bad block table descriptor
* @options: options for this descriptor
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index bd1831ea6..4449f987b 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -14,6 +14,8 @@
#ifndef __UBOOT_ONENAND_H
#define __UBOOT_ONENAND_H
+#include <linux/types.h>
+
struct kvec {
void *iov_base;
size_t iov_len;
@@ -22,6 +24,9 @@ struct kvec {
typedef int spinlock_t;
typedef int wait_queue_head_t;
+struct mtd_info;
+struct erase_info;
+
/* Functions */
extern void onenand_init(void);
extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 67506b35e..5e0455391 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -45,6 +45,8 @@
#include <version.h>
#include <net.h>
#include <serial.h>
+#include <nand.h>
+#include <onenand_uboot.h>
#ifdef CONFIG_DRIVER_SMC91111
#include "../drivers/net/smc91111.h"
@@ -55,14 +57,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-void onenand_init(void);
-#endif
-
ulong monitor_flash_len;
#ifdef CONFIG_HAS_DATAFLASH
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 1645f2c7e..532550b60 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -28,6 +28,8 @@
#include <version.h>
#include <net.h>
#include <environment.h>
+#include <nand.h>
+#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -416,6 +418,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
}
#endif
+#ifdef CONFIG_CMD_NAND
+ puts ("NAND: ");
+ nand_init (); /* go init the NAND */
+#endif
+
+#ifdef CONFIG_CMD_SPI
+ puts ("SPI: ");
+ spi_init (); /* go init the SPI */
+ puts ("ready\n");
+#endif
+
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 4956403cc..6f7242d62 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -93,9 +93,7 @@ void doc_init (void);
#if defined(CONFIG_HARD_SPI)
#include <spi.h>
#endif
-#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
-#endif
+#include <nand.h>
static char *failed = "*** failed ***\n";
diff --git a/lib_sh/board.c b/lib_sh/board.c
index 883c381e6..807415c54 100644
--- a/lib_sh/board.c
+++ b/lib_sh/board.c
@@ -76,7 +76,7 @@ static int sh_flash_init(void)
}
#if defined(CONFIG_CMD_NAND)
-void nand_init (void);
+#include <nand.h>
static int sh_nand_init(void)
{
printf("NAND: ");
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-11-04 07:27:03 +0000