diff options
| -rw-r--r-- | arch/powerpc/cpu/mpc8xxx/ddr/interactive.c | 127 | ||||
| -rw-r--r-- | doc/README.fsl-ddr | 5 |
2 files changed, 132 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index 0474acc30..e5ee77546 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -1445,6 +1445,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) "recompute reload SPD and options to default and recompute regs\n" "edit modify spd, parameter, or option\n" "compute recompute registers from current next_step to end\n" + "copy copy parameters\n" "next_step shows current next_step\n" "help this message\n" "go program the memory controller and continue with u-boot\n" @@ -1477,6 +1478,132 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) continue; } + if (strcmp(argv[0], "copy") == 0) { + unsigned int error = 0; + unsigned int step_mask = 0; + unsigned int src_ctlr_mask = 0; + unsigned int src_dimm_mask = 0; + unsigned int dimm_number_required = 0; + unsigned int src_ctlr_num = 0; + unsigned int src_dimm_num = 0; + unsigned int dst_ctlr_num = -1; + unsigned int dst_dimm_num = -1; + unsigned int i, num_dest_parms; + + if (argc == 1) { + printf("copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>\n"); + continue; + } + + error = fsl_ddr_parse_interactive_cmd( + argv, argc, + &step_mask, + &src_ctlr_mask, + &src_dimm_mask, + &dimm_number_required + ); + + /* XXX: only dimm_number_required and step_mask will + be used by this function. Parse the controller and + DIMM number separately because it is easier. */ + + if (error) + continue; + + /* parse source destination controller / DIMM */ + + num_dest_parms = dimm_number_required ? 2 : 1; + + for (i = 0; i < argc; i++) { + if (argv[i][0] == 'c') { + char c = argv[i][1]; + if (isdigit(c)) { + src_ctlr_num = (c - '0'); + break; + } + } + } + + for (i = 0; i < argc; i++) { + if (argv[i][0] == 'd') { + char c = argv[i][1]; + if (isdigit(c)) { + src_dimm_num = (c - '0'); + break; + } + } + } + + /* parse destination controller / DIMM */ + + for (i = argc - 1; i >= argc - num_dest_parms; i--) { + if (argv[i][0] == 'c') { + char c = argv[i][1]; + if (isdigit(c)) { + dst_ctlr_num = (c - '0'); + break; + } + } + } + + for (i = argc - 1; i >= argc - num_dest_parms; i--) { + if (argv[i][0] == 'd') { + char c = argv[i][1]; + if (isdigit(c)) { + dst_dimm_num = (c - '0'); + break; + } + } + } + + /* TODO: validate inputs */ + + debug("src_ctlr_num = %u, src_dimm_num = %u, dst_ctlr_num = %u, dst_dimm_num = %u, step_mask = %x\n", + src_ctlr_num, src_dimm_num, dst_ctlr_num, dst_dimm_num, step_mask); + + + switch (step_mask) { + + case STEP_GET_SPD: + memcpy(&(pinfo->spd_installed_dimms[dst_ctlr_num][dst_dimm_num]), + &(pinfo->spd_installed_dimms[src_ctlr_num][src_dimm_num]), + sizeof(pinfo->spd_installed_dimms[0][0])); + break; + + case STEP_COMPUTE_DIMM_PARMS: + memcpy(&(pinfo->dimm_params[dst_ctlr_num][dst_dimm_num]), + &(pinfo->dimm_params[src_ctlr_num][src_dimm_num]), + sizeof(pinfo->dimm_params[0][0])); + break; + + case STEP_COMPUTE_COMMON_PARMS: + memcpy(&(pinfo->common_timing_params[dst_ctlr_num]), + &(pinfo->common_timing_params[src_ctlr_num]), + sizeof(pinfo->common_timing_params[0])); + break; + + case STEP_GATHER_OPTS: + memcpy(&(pinfo->memctl_opts[dst_ctlr_num]), + &(pinfo->memctl_opts[src_ctlr_num]), + sizeof(pinfo->memctl_opts[0])); + break; + + /* someday be able to have addresses to copy addresses... */ + + case STEP_COMPUTE_REGS: + memcpy(&(pinfo->fsl_ddr_config_reg[dst_ctlr_num]), + &(pinfo->fsl_ddr_config_reg[src_ctlr_num]), + sizeof(pinfo->memctl_opts[0])); + break; + + default: + printf("unexpected step_mask value\n"); + } + + continue; + + } + if (strcmp(argv[0], "edit") == 0) { unsigned int error = 0; unsigned int step_mask = 0; diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index 59583b3fc..b2a7c0fab 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -279,6 +279,7 @@ The example flow of using interactive debugging is type command "compute" to calculate the parameters from the default type command "print" with arguments to show SPD, options, registers type command "edit" with arguments to change any if desired +type command "copy" with arguments to copy controller/dimm settings type command "go" to continue calculation and enable DDR controller type command "reset" to reset the board type command "recompute" to reload SPD and start over @@ -313,6 +314,10 @@ edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value> byte number if the object is SPD <value> - decimal or heximal (prefixed with 0x) numbers +copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#> + same as for "edit" command + DIMM numbers ignored for commonparms, opts, and regs + reset no arguement - reset the board |