diff options
47 files changed, 84 insertions, 7 deletions
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S index b5834b91e..42b0f72ac 100644 --- a/cpu/74xx_7xx/start.S +++ b/cpu/74xx_7xx/start.S @@ -316,7 +316,7 @@ invalidate_bats: mtspr IBAT1U, r0 mtspr IBAT2U, r0 mtspr IBAT3U, r0 -#ifdef CONFIG_750FX +#ifdef CONFIG_HIGH_BATS mtspr IBAT4U, r0 mtspr IBAT5U, r0 mtspr IBAT6U, r0 @@ -327,7 +327,7 @@ invalidate_bats: mtspr DBAT1U, r0 mtspr DBAT2U, r0 mtspr DBAT3U, r0 -#ifdef CONFIG_750FX +#ifdef CONFIG_HIGH_BATS mtspr DBAT4U, r0 mtspr DBAT5U, r0 mtspr DBAT6U, r0 @@ -414,7 +414,7 @@ setup_bats: mtspr DBAT3U, r3 isync -#ifdef CONFIG_750FX +#ifdef CONFIG_HIGH_BATS /* IBAT 4 */ addis r4, r0, CFG_IBAT4L@h ori r4, r4, CFG_IBAT4L@l diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 309eb30e8..c18217479 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -557,7 +557,7 @@ invalidate_bats: mtspr IBAT1U, r0 mtspr IBAT2U, r0 mtspr IBAT3U, r0 -#if (CFG_HID2 & HID2_HBE) +#ifdef CONFIG_HIGH_BATS mtspr IBAT4U, r0 mtspr IBAT5U, r0 mtspr IBAT6U, r0 @@ -568,7 +568,7 @@ invalidate_bats: mtspr DBAT1U, r0 mtspr DBAT2U, r0 mtspr DBAT3U, r0 -#if (CFG_HID2 & HID2_HBE) +#ifdef CONFIG_HIGH_BATS mtspr DBAT4U, r0 mtspr DBAT5U, r0 mtspr DBAT6U, r0 @@ -655,7 +655,7 @@ setup_bats: mtspr DBAT3U, r3 isync -#if (CFG_HID2 & HID2_HBE) +#ifdef CONFIG_HIGH_BATS /* IBAT 4 */ addis r4, r0, CFG_IBAT4L@h ori r4, r4, CFG_IBAT4L@l diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 3f2f6140f..38b962f82 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_ALASKA8220 1 /* ... on Alaska board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 706c13efa..b7574bf14 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -61,6 +61,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 48e29a208..89edbde1d 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -61,6 +61,8 @@ #undef CONFIG_ECC /* enable ECC support */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* which initialization functions to call for this board */ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_PRE_INIT diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index f85cff7ab..3a347eac5 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -37,6 +37,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 610151f58..d547681c3 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -469,6 +469,8 @@ #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index e0a887c7e..7a5d0aa1d 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -453,6 +453,7 @@ /* * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 32f57ac7d..977c041dc 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -468,6 +468,7 @@ /* * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 1276a124c..9ca2a2be0 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -483,6 +483,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 119e7ac7c..bd7754000 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -626,6 +626,7 @@ #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index c72de03c0..38410a176 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -555,6 +555,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 983575eb0..fcfbe6f82 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -515,6 +515,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 7b7d6f50c..adedcb95a 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -419,6 +419,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index e92493ae4..4e159a0b4 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -502,6 +502,7 @@ /* * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* DDR: cache cacheable */ #define CFG_SDRAM_LOWER CFG_SDRAM_BASE diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index f7e6fd2c5..29c2490e6 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -524,6 +524,8 @@ * MMU Setup */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR: cache cacheable */ #define CFG_SDRAM_LOWER CFG_SDRAM_BASE #define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000) diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 15ff0eacf..a051b6d39 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -55,6 +55,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */ #define CONFIG_ALTIVEC 1 /* diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9acc3da54..49ee7ffd3 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -67,6 +67,7 @@ #define BANK_INTERLEAVING 0x22000000 #define SUPER_BANK_INTERLEAVING 0x23000000 +#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_ALTIVEC 1 diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 6eb644492..259178f85 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -40,6 +40,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 6cb3022b9..d21783b83 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -42,6 +42,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 71fa36baa..4c447356a 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -50,6 +50,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index bff2edf76..bfb478a86 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -47,6 +47,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index a86939e09..89fc46541 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -423,6 +423,8 @@ extern int tqm834x_num_flash_banks; #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR 0 - 512M */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 31f10dd87..598fe7bf2 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -48,6 +48,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index 00c4ff093..1b4195a08 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_YUKON8220 1 /* ... on Yukon board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index c975a249c..4226529eb 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -372,6 +372,8 @@ #define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Internal Definitions * diff --git a/include/configs/aev.h b/include/configs/aev.h index e3f810c5c..c5e475921 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -41,6 +41,8 @@ #define CONFIG_AEVFIFO 1 #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 0f7bb619c..f097e2c2f 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -40,6 +40,8 @@ #define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index d55434802..ef50c7cab 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -31,6 +31,8 @@ #define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ #define CONFIG_CM5200 1 /* ... on CM5200 platform */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Supported commands */ diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 1b30e51a3..fffd1fe1f 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -50,6 +50,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index e5a889774..ad7cf7686 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -40,6 +40,8 @@ #define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index c89f041ee..6ec92c38c 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -40,6 +40,8 @@ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 980e9fe9c..c9859270c 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -41,6 +41,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index a9c86f9e3..e4c3f7239 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -40,6 +40,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration * diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 5218d9ca9..8dfb9aa8a 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -50,6 +50,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 150359816..b6843af3d 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -35,6 +35,7 @@ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * BOOTP options diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index f614e679f..a218f7576 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -39,7 +39,7 @@ #define CONFIG_MPC7448HPC2 #define CONFIG_74xx -#define CONFIG_750FX /* this option to enable init of extended BATs */ +#define CONFIG_HIGH_BATS /* High BATs supported */ #define CONFIG_ALTIVEC /* undef to disable */ #define CFG_BOARD_NAME "MPC7448 HPC II" diff --git a/include/configs/munices.h b/include/configs/munices.h index 38b27bb3a..e0046ec2d 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -35,6 +35,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * Command line configuration. diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index 8dde1ef39..88bdb03e6 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -37,6 +37,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 0dac5161b..0913b14a4 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -42,6 +42,7 @@ #if defined (CONFIG_P3M750) #define CONFIG_750FX /* 750GL/GX/FX */ +#define CONFIG_HIGH_BATS /* High BATs supported */ #define CFG_BOARD_NAME "P3M750" #define CFG_BUS_HZ 100000000 #define CFG_BUS_CLK CFG_BUS_HZ diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 2ce39c913..c065d3328 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -49,6 +49,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ /* * Serial console configuration */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 0ebc674a6..74815567f 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -570,6 +570,8 @@ #define CFG_HID2 HID2_HBE +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* DDR @ 0x00000000 */ #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h index 4578cae7d..3e47eb88a 100644 --- a/include/configs/smmaco4.h +++ b/include/configs/smmaco4.h @@ -42,6 +42,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index c62b9775c..18f553373 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -31,6 +31,8 @@ #define CONFIG_MPC8220 1 #define CONFIG_SORCERY 1 /* Sorcery board */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ #define CFG_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 49213dc67..69d2d67ab 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -44,6 +44,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/uc101.h b/include/configs/uc101.h index dc1d7e1b3..042750e2f 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -40,6 +40,8 @@ #define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index e24d6f77a..c20352255 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -46,6 +46,8 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + /* * Serial console configuration */ |