diff options
| -rw-r--r-- | board/freescale/mpc8349emds/pci.c | 377 | ||||
| -rw-r--r-- | include/configs/MPC8349EMDS.h | 4 | 
2 files changed, 63 insertions, 318 deletions
diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c index ecc67b66e..a783bebad 100644 --- a/board/freescale/mpc8349emds/pci.c +++ b/board/freescale/mpc8349emds/pci.c @@ -20,58 +20,62 @@   */  #include <asm/mmu.h> +#include <asm/io.h>  #include <common.h> -#include <asm/global_data.h> +#include <mpc83xx.h>  #include <pci.h> -#include <asm/mpc8349_pci.h>  #include <i2c.h> -#if defined(CONFIG_OF_LIBFDT) -#include <libfdt.h> -#include <fdt_support.h> -#endif - +#include <asm/fsl_i2c.h>  DECLARE_GLOBAL_DATA_PTR;  #ifdef CONFIG_PCI -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc8349emds_config_table[] = { -	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -	 PCI_IDSEL_NUMBER, PCI_ANY_ID, -	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, -				     PCI_ENET0_MEMADDR, -				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER -		} +static struct pci_region pci1_regions[] = { +	{ +		bus_start: CFG_PCI1_MEM_BASE, +		phys_start: CFG_PCI1_MEM_PHYS, +		size: CFG_PCI1_MEM_SIZE, +		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH +	}, +	{ +		bus_start: CFG_PCI1_IO_BASE, +		phys_start: CFG_PCI1_IO_PHYS, +		size: CFG_PCI1_IO_SIZE, +		flags: PCI_REGION_IO +	}, +	{ +		bus_start: CFG_PCI1_MMIO_BASE, +		phys_start: CFG_PCI1_MMIO_PHYS, +		size: CFG_PCI1_MMIO_SIZE, +		flags: PCI_REGION_MEM  	}, -	{}  }; -#endif -static struct pci_controller pci_hose[] = { -       { -#ifndef CONFIG_PCI_PNP -       config_table:pci_mpc8349emds_config_table, -#endif -       }, -       { -#ifndef CONFIG_PCI_PNP -       config_table:pci_mpc8349emds_config_table, -#endif -       } +#ifdef CONFIG_MPC83XX_PCI2 +static struct pci_region pci2_regions[] = { +	{ +		bus_start: CFG_PCI2_MEM_BASE, +		phys_start: CFG_PCI2_MEM_PHYS, +		size: CFG_PCI2_MEM_SIZE, +		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH +	}, +	{ +		bus_start: CFG_PCI2_IO_BASE, +		phys_start: CFG_PCI2_IO_PHYS, +		size: CFG_PCI2_IO_SIZE, +		flags: PCI_REGION_IO +	}, +	{ +		bus_start: CFG_PCI2_MMIO_BASE, +		phys_start: CFG_PCI2_MMIO_PHYS, +		size: CFG_PCI2_MMIO_SIZE, +		flags: PCI_REGION_MEM +	},  }; +#endif -/************************************************************************** - * - * pib_init() -- initialize the PCA9555PW IO expander on the PIB board - * - */ -void -pib_init(void) +void pib_init(void)  {  	u8 val8, orig_i2c_bus;  	/* @@ -128,299 +132,38 @@ pib_init(void)  	i2c_set_bus_num(orig_i2c_bus);  } -/************************************************************************** - * pci_init_board() - * - * NOTICE: PCI2 is not currently supported - * - */ -void -pci_init_board(void) +void pci_init_board(void)  { -	volatile immap_t *	immr; -	volatile clk83xx_t *	clk; -	volatile law83xx_t *	pci_law; -	volatile pot83xx_t *	pci_pot; -	volatile pcictrl83xx_t *	pci_ctrl; -	volatile pciconf83xx_t *	pci_conf; -	u16 reg16; -	u32 reg32; -	u32 dev; -	struct	pci_controller * hose; - -	immr = (immap_t *)CFG_IMMR; -	clk = (clk83xx_t *)&immr->clk; -	pci_law = immr->sysconf.pcilaw; -	pci_pot = immr->ios.pot; -	pci_ctrl = immr->pci_ctrl; -	pci_conf = immr->pci_conf; - -	hose = &pci_hose[0]; +	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; +	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; +	volatile law83xx_t *pci_law = immr->sysconf.pcilaw; +#ifndef CONFIG_MPC83XX_PCI2 +	struct pci_region *reg[] = { pci1_regions }; +#else +	struct pci_region *reg[] = { pci1_regions, pci2_regions }; +#endif +	/* initialize the PCA9555PW IO expander on the PIB board */  	pib_init(); -	/* -	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode -	 */ - -	reg32 = clk->occr; -	udelay(2000); +	/* Enable all 8 PCI_CLK_OUTPUTS */  	clk->occr = 0xff000000;  	udelay(2000); -	/* -	 * Release PCI RST Output signal -	 */ -	pci_ctrl[0].gcr = 0; -	udelay(2000); -	pci_ctrl[0].gcr = 1; - -#ifdef CONFIG_MPC83XX_PCI2 -	pci_ctrl[1].gcr = 0; -	udelay(2000); -	pci_ctrl[1].gcr = 1; -#endif - -	/* We need to wait at least a 1sec based on PCI specs */ -	{ -		int i; - -		for (i = 0; i < 1000; ++i) -			udelay (1000); -	} - -	/* -	 * Configure PCI Local Access Windows -	 */ +	/* Configure PCI Local Access Windows */  	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;  	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;  	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;  	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; -	/* -	 * Configure PCI Outbound Translation Windows -	 */ - -	/* PCI1 mem space - prefetch */ -	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; -	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; -	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); - -	/* PCI1 IO space */ -	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; -	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; -	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - -	/* PCI1 mmio - non-prefetch mem space */ -	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; -	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; -	pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); - -	/* -	 * Configure PCI Inbound Translation Windows -	 */ - -	/* we need RAM mapped to PCI space for the devices to -	 * access main memory */ -	pci_ctrl[0].pitar1 = 0x0; -	pci_ctrl[0].pibar1 = 0x0; -	pci_ctrl[0].piebar1 = 0x0; -	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - -	hose->first_busno = 0; -	hose->last_busno = 0xff; - -	/* PCI memory prefetch space */ -	pci_set_region(hose->regions + 0, -		       CFG_PCI1_MEM_BASE, -		       CFG_PCI1_MEM_PHYS, -		       CFG_PCI1_MEM_SIZE, -		       PCI_REGION_MEM|PCI_REGION_PREFETCH); - -	/* PCI memory space */ -	pci_set_region(hose->regions + 1, -		       CFG_PCI1_MMIO_BASE, -		       CFG_PCI1_MMIO_PHYS, -		       CFG_PCI1_MMIO_SIZE, -		       PCI_REGION_MEM); - -	/* PCI IO space */ -	pci_set_region(hose->regions + 2, -		       CFG_PCI1_IO_BASE, -		       CFG_PCI1_IO_PHYS, -		       CFG_PCI1_IO_SIZE, -		       PCI_REGION_IO); - -	/* System memory space */ -	pci_set_region(hose->regions + 3, -		       CONFIG_PCI_SYS_MEM_BUS, -		       CONFIG_PCI_SYS_MEM_PHYS, -		       gd->ram_size, -		       PCI_REGION_MEM | PCI_REGION_MEMORY); - -	hose->region_count = 4; - -	pci_setup_indirect(hose, -			   (CFG_IMMR+0x8300), -			   (CFG_IMMR+0x8304)); - -	pci_register_hose(hose); - -	/* -	 * Write to Command register -	 */ -	reg16 = 0xff; -	dev = PCI_BDF(hose->first_busno, 0, 0); -	pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); -	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - -	/* -	 * Clear non-reserved bits in status register. -	 */ -	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); -	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); -	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - -#ifdef CONFIG_PCI_SCAN_SHOW -	printf("PCI:   Bus Dev VenId DevId Class Int\n"); -#endif -	/* -	 * Hose scan. -	 */ -	hose->last_busno = pci_hose_scan(hose); - -#ifdef CONFIG_MPC83XX_PCI2 -	hose = &pci_hose[1]; - -	/* -	 * Configure PCI Outbound Translation Windows -	 */ - -	/* PCI2 mem space - prefetch */ -	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; -	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; -	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); - -	/* PCI2 IO space */ -	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; -	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; -	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); - -	/* PCI2 mmio - non-prefetch mem space */ -	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; -	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; -	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); - -	/* -	 * Configure PCI Inbound Translation Windows -	 */ - -	/* we need RAM mapped to PCI space for the devices to -	 * access main memory */ -	pci_ctrl[1].pitar1 = 0x0; -	pci_ctrl[1].pibar1 = 0x0; -	pci_ctrl[1].piebar1 = 0x0; -	pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); - -	hose->first_busno = pci_hose[0].last_busno + 1; -	hose->last_busno = 0xff; - -	/* PCI memory prefetch space */ -	pci_set_region(hose->regions + 0, -		       CFG_PCI2_MEM_BASE, -		       CFG_PCI2_MEM_PHYS, -		       CFG_PCI2_MEM_SIZE, -		       PCI_REGION_MEM|PCI_REGION_PREFETCH); - -	/* PCI memory space */ -	pci_set_region(hose->regions + 1, -		       CFG_PCI2_MMIO_BASE, -		       CFG_PCI2_MMIO_PHYS, -		       CFG_PCI2_MMIO_SIZE, -		       PCI_REGION_MEM); - -	/* PCI IO space */ -	pci_set_region(hose->regions + 2, -		       CFG_PCI2_IO_BASE, -		       CFG_PCI2_IO_PHYS, -		       CFG_PCI2_IO_SIZE, -		       PCI_REGION_IO); - -	/* System memory space */ -	pci_set_region(hose->regions + 3, -		       CONFIG_PCI_SYS_MEM_BUS, -		       CONFIG_PCI_SYS_MEM_PHYS, -		       gd->ram_size, -		       PCI_REGION_MEM | PCI_REGION_MEMORY); - -	hose->region_count = 4; - -	pci_setup_indirect(hose, -			   (CFG_IMMR+0x8380), -			   (CFG_IMMR+0x8384)); - -	pci_register_hose(hose); - -	/* -	 * Write to Command register -	 */ -	reg16 = 0xff; -	dev = PCI_BDF(hose->first_busno, 0, 0); -	pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); -	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - -	/* -	 * Clear non-reserved bits in status register. -	 */ -	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); -	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); -	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); +	udelay(2000); -	/* -	 * Hose scan. -	 */ -	hose->last_busno = pci_hose_scan(hose); +#ifndef CONFIG_MPC83XX_PCI2 +	mpc83xx_pci_init(1, reg, 0); +#else +	mpc83xx_pci_init(2, reg, 0);  #endif -  } -#if defined(CONFIG_OF_LIBFDT) -void ft_pci_setup(void *blob, bd_t *bd) -{ -	int nodeoffset; -	int tmp[2]; -	const char *path; - -	nodeoffset = fdt_path_offset(blob, "/aliases"); -	if (nodeoffset >= 0) { -		path = fdt_getprop(blob, nodeoffset, "pci0", NULL); -		if (path) { -			tmp[0] = cpu_to_be32(pci_hose[0].first_busno); -			tmp[1] = cpu_to_be32(pci_hose[0].last_busno); -			do_fixup_by_path(blob, path, "bus-range", -				&tmp, sizeof(tmp), 1); - -			tmp[0] = cpu_to_be32(gd->pci_clk); -			do_fixup_by_path(blob, path, "clock-frequency", -				&tmp, sizeof(tmp[0]), 1); -		} -#ifdef CONFIG_MPC83XX_PCI2 -		path = fdt_getprop(blob, nodeoffset, "pci1", NULL); -		if (path) { -			tmp[0] = cpu_to_be32(pci_hose[0].first_busno); -			tmp[1] = cpu_to_be32(pci_hose[0].last_busno); -			do_fixup_by_path(blob, path, "bus-range", -				&tmp, sizeof(tmp), 1); - -			tmp[0] = cpu_to_be32(gd->pci_clk); -			do_fixup_by_path(blob, path, "clock-frequency", -				&tmp, sizeof(tmp[0]), 1); -		} -#endif -	} -} -#endif /* CONFIG_OF_LIBFDT */  #endif /* CONFIG_PCI */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index a53f5cd26..d659a15b6 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -406,6 +406,8 @@  #define CONFIG_NET_MULTI  #define CONFIG_PCI_PNP		/* do pci plug-and-play */ +#define CONFIG_83XX_GENERIC_PCI +#define CONFIG_83XX_PCI_STREAMING  #undef CONFIG_EEPRO100  #undef CONFIG_TULIP @@ -417,7 +419,7 @@  #endif  #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */ -#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */  #endif	/* CONFIG_PCI */  |