Initial revision

1 files changed, 646 insertions, 0 deletions

diff --git a/post/ether.c b/post/ether.c
new file mode 100644
index 000000000..5b42ca76e
--- /dev/null
+++ b/post/ether.c
@@ -0,0 +1,646 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Serial Communication Controllers (SCC) listed in ctlr_list array below
+ * are tested in the loopback ethernet mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ *   MIN_PACKET_LENGTH - minimum size of packet to transmit
+ *   MAX_PACKET_LENGTH - maximum size of packet to transmit
+ *   TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+
+#include <command.h>
+#include <net.h>
+
+#if CONFIG_POST & CFG_POST_ETHER
+
+#define MIN_PACKET_LENGTH	64
+#define MAX_PACKET_LENGTH	256
+#define TEST_NUM		1
+
+#define CTLR_SCC 0
+
+extern void spi_init_f (void);
+extern void spi_init_r (void);
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] = { {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+	void (*init) (int index);
+	int (*send) (int index, volatile void *packet, int length);
+	int (*recv) (int index, void *packet, int length);
+} ctlr_proc[1];
+
+static char *ctlr_name[1] = { "SCC" };
+
+static int used_by_uart[1] = { -1 };
+static int used_by_ether[1] = { -1 };
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH  1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx;		/* index of the current RX buffer */
+static uint txIdx;		/* index of the current TX buffer */
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+
+typedef volatile struct CommonBufferDescriptor {
+	cbd_t rxbd[PKTBUFSRX];		/* Rx BD */
+	cbd_t txbd[TX_BUF_CNT];		/* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+  /*
+   * SCC callbacks
+   */
+
+static void scc_init (int scc_index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	bd_t *bd = gd->bd;
+
+	static int proff[] =
+			{ PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+	static unsigned int cpm_cr[] =
+			{ CPM_CR_CH_SCC1, CPM_CR_CH_SCC2, CPM_CR_CH_SCC3,
+CPM_CR_CH_SCC4 };
+
+	int i;
+	scc_enet_t *pram_ptr;
+
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#if defined(CONFIG_FADS)
+#if defined(CONFIG_MPC860T)
+	/* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals. */
+	*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
+	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
+	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#else
+	*((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
+	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
+	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif
+#endif
+
+	pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[proff[scc_index]]);
+
+	rxIdx = 0;
+	txIdx = 0;
+
+#ifdef CFG_ALLOC_DPRAM
+	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+					 dpram_alloc_align (sizeof (RTXBD), 8));
+#else
+	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
+#endif
+
+#if 0
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+	/* Configure port A pins for Txd and Rxd.
+	 */
+	immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+	immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+	immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+	/* Configure port B pins for Txd and Rxd.
+	 */
+	immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+	immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+	immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+	/* Configure port C pins to disable External Loopback
+	 */
+	immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+	immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
+	immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+	immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+	/* Configure port C pins to enable CLSN and RENA.
+	 */
+	immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+	immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+	immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+	/* Configure port A for TCLK and RCLK.
+	 */
+	immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+	immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+	/*
+	 * Configure Serial Interface clock routing -- see section 16.7.5.3
+	 * First, clear all SCC bits to zero, then set the ones we want.
+	 */
+
+	immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
+	immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
+#else
+	/*
+	 * SCC2 receive clock is BRG2
+	 * SCC2 transmit clock is BRG3
+	 */
+	immr->im_cpm.cp_brgc2 = 0x0001000C;
+	immr->im_cpm.cp_brgc3 = 0x0001000C;
+
+	immr->im_cpm.cp_sicr &= ~0x00003F00;
+	immr->im_cpm.cp_sicr |=  0x00000a00;
+#endif /* 0 */
+
+
+	/*
+	 * Initialize SDCR -- see section 16.9.23.7
+	 * SDMA configuration register
+	 */
+	immr->im_siu_conf.sc_sdcr = 0x01;
+
+
+	/*
+	 * Setup SCC Ethernet Parameter RAM
+	 */
+
+	pram_ptr->sen_genscc.scc_rfcr = 0x18;	/* Normal Operation and Mot byte ordering */
+	pram_ptr->sen_genscc.scc_tfcr = 0x18;	/* Mot byte ordering, Normal access */
+
+	pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH;	/* max. ET package len 1520 */
+
+	pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]);	/* Set RXBD tbl start at Dual Port */
+	pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]);	/* Set TXBD tbl start at Dual Port */
+
+	/*
+	 * Setup Receiver Buffer Descriptors (13.14.24.18)
+	 * Settings:
+	 *     Empty, Wrap
+	 */
+
+	for (i = 0; i < PKTBUFSRX; i++) {
+		rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+		rtx->rxbd[i].cbd_datlen = 0;	/* Reset */
+		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+	}
+
+	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+	/*
+	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+	 * Settings:
+	 *    Add PADs to Short FRAMES, Wrap, Last, Tx CRC
+	 */
+
+	for (i = 0; i < TX_BUF_CNT; i++) {
+		rtx->txbd[i].cbd_sc =
+				(BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+		rtx->txbd[i].cbd_datlen = 0;	/* Reset */
+		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+	}
+
+	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+	/*
+	 * Enter Command:  Initialize Rx Params for SCC
+	 */
+
+	do {				/* Spin until ready to issue command    */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+	/* Issue command */
+	immr->im_cpm.cp_cpcr =
+			((CPM_CR_INIT_RX << 8) | (cpm_cr[scc_index] << 4) |
+			 CPM_CR_FLG);
+	do {				/* Spin until command processed     */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+	/*
+	 * Ethernet Specific Parameter RAM
+	 *     see table 13-16, pg. 660,
+	 *     pg. 681 (example with suggested settings)
+	 */
+
+	pram_ptr->sen_cpres = ~(0x0);	/* Preset CRC */
+	pram_ptr->sen_cmask = 0xdebb20e3;	/* Constant Mask for CRC */
+	pram_ptr->sen_crcec = 0x0;	/* Error Counter CRC (unused) */
+	pram_ptr->sen_alec = 0x0;	/* Alignment Error Counter (unused) */
+	pram_ptr->sen_disfc = 0x0;	/* Discard Frame Counter (unused) */
+	pram_ptr->sen_pads = 0x8888;	/* Short Frame PAD Characters */
+
+	pram_ptr->sen_retlim = 15;	/* Retry Limit Threshold */
+	pram_ptr->sen_maxflr = 1518;	/* MAX Frame Length Register */
+	pram_ptr->sen_minflr = 64;	/* MIN Frame Length Register */
+
+	pram_ptr->sen_maxd1 = DBUF_LENGTH;	/* MAX DMA1 Length Register */
+	pram_ptr->sen_maxd2 = DBUF_LENGTH;	/* MAX DMA2 Length Register */
+
+	pram_ptr->sen_gaddr1 = 0x0;	/* Group Address Filter 1 (unused) */
+	pram_ptr->sen_gaddr2 = 0x0;	/* Group Address Filter 2 (unused) */
+	pram_ptr->sen_gaddr3 = 0x0;	/* Group Address Filter 3 (unused) */
+	pram_ptr->sen_gaddr4 = 0x0;	/* Group Address Filter 4 (unused) */
+
+#define ea bd->bi_enetaddr
+	pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+	pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+	pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+
+	pram_ptr->sen_pper = 0x0;	/* Persistence (unused) */
+	pram_ptr->sen_iaddr1 = 0x0;	/* Individual Address Filter 1 (unused) */
+	pram_ptr->sen_iaddr2 = 0x0;	/* Individual Address Filter 2 (unused) */
+	pram_ptr->sen_iaddr3 = 0x0;	/* Individual Address Filter 3 (unused) */
+	pram_ptr->sen_iaddr4 = 0x0;	/* Individual Address Filter 4 (unused) */
+	pram_ptr->sen_taddrh = 0x0;	/* Tmp Address (MSB) (unused) */
+	pram_ptr->sen_taddrm = 0x0;	/* Tmp Address (unused) */
+	pram_ptr->sen_taddrl = 0x0;	/* Tmp Address (LSB) (unused) */
+
+	/*
+	 * Enter Command:  Initialize Tx Params for SCC
+	 */
+
+	do {				/* Spin until ready to issue command    */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+	/* Issue command */
+	immr->im_cpm.cp_cpcr =
+			((CPM_CR_INIT_TX << 8) | (cpm_cr[scc_index] << 4) |
+			 CPM_CR_FLG);
+	do {				/* Spin until command processed     */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+	/*
+	 * Mask all Events in SCCM - we use polling mode
+	 */
+	immr->im_cpm.cp_scc[scc_index].scc_sccm = 0;
+
+	/*
+	 * Clear Events in SCCE -- Clear bits by writing 1's
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_scce = ~(0x0);
+
+
+	/*
+	 * Initialize GSMR High 32-Bits
+	 * Settings:  Normal Mode
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrh = 0;
+
+	/*
+	 * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
+	 * Settings:
+	 *     TCI = Invert
+	 *     TPL =  48 bits
+	 *     TPP = Repeating 10's
+	 *     LOOP = Loopback
+	 *     MODE = Ethernet
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl = (SCC_GSMRL_TCI |
+												SCC_GSMRL_TPL_48 |
+												SCC_GSMRL_TPP_10 |
+												SCC_GSMRL_DIAG_LOOP |
+												SCC_GSMRL_MODE_ENET);
+
+	/*
+	 * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_dsr = 0xd555;
+
+	/*
+	 * Initialize the PSMR
+	 * Settings:
+	 *  CRC = 32-Bit CCITT
+	 *  NIB = Begin searching for SFD 22 bits after RENA
+	 *  LPB = Loopback Enable (Needed when FDE is set)
+	 */
+	immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
+			SCC_PSMR_NIB22 | SCC_PSMR_LPB;
+
+#if 0
+	/*
+	 * Configure Ethernet TENA Signal
+	 */
+
+#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
+	immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
+	immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
+	immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
+	immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
+#endif
+
+#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
+	/*
+	 * Port C is used to control the PHY,MC68160.
+	 */
+	immr->im_ioport.iop_pcdir |=
+			(PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
+
+	immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
+	immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
+	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif /* MPC860ADS */
+
+#if defined(CONFIG_AMX860)
+	/*
+	 * Port B is used to control the PHY,MC68160.
+	 */
+	immr->im_cpm.cp_pbdir |=
+			(PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
+
+	immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
+	immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
+
+	immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
+	immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
+#endif /* AMX860 */
+
+#endif /* 0 */
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
+	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
+#endif
+
+#ifdef CONFIG_RPXLITE
+	*((uchar *) BCSR0) |= BCSR0_ETHEN;
+#endif
+
+#ifdef CONFIG_MBX
+	board_ether_init ();
+#endif
+
+	/*
+	 * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl |=
+			(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/*
+	 * Work around transmit problem with first eth packet
+	 */
+#if defined (CONFIG_FADS)
+	udelay (10000);				/* wait 10 ms */
+#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+	udelay (100000);			/* wait 100 ms */
+#endif
+}
+
+static int scc_send (int index, volatile void *packet, int length)
+{
+	int i, j = 0;
+
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+		udelay (1);		/* will also trigger Wd if needed */
+		j++;
+	}
+	if (j >= TOUT_LOOP)
+		printf ("TX not ready\n");
+	rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
+	rtx->txbd[txIdx].cbd_datlen = length;
+	rtx->txbd[txIdx].cbd_sc |=
+			(BD_ENET_TX_READY | BD_ENET_TX_LAST | BD_ENET_TX_WRAP);
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+		udelay (1);		/* will also trigger Wd if needed */
+		j++;
+	}
+	if (j >= TOUT_LOOP)
+		printf ("TX timeout\n");
+	i = (rtx->txbd[txIdx].
+		 cbd_sc & BD_ENET_TX_STATS) /* return only status bits */ ;
+	return i;
+}
+
+static int scc_recv (int index, void *packet, int max_length)
+{
+	int length = -1;
+
+	if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+		goto Done;		/* nothing received */
+	}
+
+	if (!(rtx->rxbd[rxIdx].cbd_sc & 0x003f)) {
+		length = rtx->rxbd[rxIdx].cbd_datlen - 4;
+		memcpy (packet,
+				(void *) (NetRxPackets[rxIdx]),
+				length < max_length ? length : max_length);
+	}
+
+	/* Give the buffer back to the SCC. */
+	rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+	/* wrap around buffer index when necessary */
+	if ((rxIdx + 1) >= PKTBUFSRX) {
+		rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+				(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+		rxIdx = 0;
+	} else {
+		rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+		rxIdx++;
+	}
+
+  Done:
+	return length;
+}
+
+  /*
+   * Test routines
+   */
+
+static void packet_fill (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	packet[0] = 0xFF;
+	packet[1] = 0xFF;
+	packet[2] = 0xFF;
+	packet[3] = 0xFF;
+	packet[4] = 0xFF;
+	packet[5] = 0xFF;
+
+	for (i = 6; i < length; i++) {
+		packet[i] = c++;
+	}
+}
+
+static int packet_check (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 6; i < length; i++) {
+		if (packet[i] != c++)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int test_ctlr (int ctlr, int index)
+{
+	int res = -1;
+	char packet_send[MAX_PACKET_LENGTH];
+	char packet_recv[MAX_PACKET_LENGTH];
+	int length;
+	int i;
+	int l;
+
+	ctlr_proc[ctlr].init (index);
+
+	for (i = 0; i < TEST_NUM; i++) {
+		for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+			packet_fill (packet_send, l);
+
+			ctlr_proc[ctlr].send (index, packet_send, l);
+
+			length = ctlr_proc[ctlr].recv (index, packet_recv,
+							MAX_PACKET_LENGTH);
+
+			if (length != l || packet_check (packet_recv, length) < 0) {
+				goto Done;
+			}
+		}
+	}
+
+	res = 0;
+
+  Done:
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+	if (used_by_uart[ctlr] == index) {
+		serial_init ();
+	}
+#endif
+
+#if defined(SCC_ENET)
+	if (used_by_ether[ctlr] == index) {
+		DECLARE_GLOBAL_DATA_PTR;
+
+		eth_init (gd->bd);
+	}
+#endif
+
+	/*
+	 * SCC2 Ethernet parameter RAM space overlaps
+	 * the SPI parameter RAM space. So we need to restore
+	 * the SPI configuration after SCC2 ethernet test.
+	 */
+#if defined(CONFIG_SPI)
+	if (ctlr == CTLR_SCC && index == 1) {
+		spi_init_f ();
+		spi_init_r ();
+	}
+#endif
+
+	if (res != 0) {
+		post_log ("ethernet %s%d test failed\n", ctlr_name[ctlr],
+				  index + 1);
+	}
+
+	return res;
+}
+
+int ether_post_test (int flags)
+{
+	int res = 0;
+	int i;
+
+#if defined(CONFIG_8xx_CONS_SCC1)
+	used_by_uart[CTLR_SCC] = 0;
+#elif defined(CONFIG_8xx_CONS_SCC2)
+	used_by_uart[CTLR_SCC] = 1;
+#elif defined(CONFIG_8xx_CONS_SCC3)
+	used_by_uart[CTLR_SCC] = 2;
+#elif defined(CONFIG_8xx_CONS_SCC4)
+	used_by_uart[CTLR_SCC] = 3;
+#endif
+
+#if defined(SCC_ENET)
+	used_by_ether[CTLR_SCC] = SCC_ENET;
+#endif
+
+	ctlr_proc[CTLR_SCC].init = scc_init;
+	ctlr_proc[CTLR_SCC].send = scc_send;
+	ctlr_proc[CTLR_SCC].recv = scc_recv;
+
+	for (i = 0; i < CTRL_LIST_SIZE; i++) {
+		if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+			res = -1;
+		}
+	}
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_ETHER */
+
+#endif /* CONFIG_POST */