usb:gadget:s5p USB Device Controller (UDC) implementation

This commit provides UDC driver support for Samsung's SoC
family of processors.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Remy Bohmer <linux@bohmer.net>

1 files changed, 175 insertions, 0 deletions

diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
new file mode 100644
index 000000000..14dadc8b0
--- /dev/null
+++ b/include/usb/s3c_udc.h
@@ -0,0 +1,175 @@
+/*
+ * drivers/usb/gadget/s3c_udc.h
+ * Samsung S3C on-chip full/high speed USB device controllers
+ * Copyright (C) 2005 for Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __S3C_USB_GADGET
+#define __S3C_USB_GADGET
+
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/list.h>
+#include <usb/lin_gadget_compat.h>
+
+#define PHY0_SLEEP              (1 << 5)
+
+/*-------------------------------------------------------------------------*/
+/* DMA bounce buffer size, 16K is enough even for mass storage */
+#define DMA_BUFFER_SIZE	(4096*4)
+
+#define EP0_FIFO_SIZE		64
+#define EP_FIFO_SIZE		512
+#define EP_FIFO_SIZE2		1024
+/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */
+#define S3C_MAX_ENDPOINTS	4
+#define S3C_MAX_HW_ENDPOINTS	16
+
+#define WAIT_FOR_SETUP          0
+#define DATA_STATE_XMIT         1
+#define DATA_STATE_NEED_ZLP     2
+#define WAIT_FOR_OUT_STATUS     3
+#define DATA_STATE_RECV         4
+#define WAIT_FOR_COMPLETE	5
+#define WAIT_FOR_OUT_COMPLETE	6
+#define WAIT_FOR_IN_COMPLETE	7
+#define WAIT_FOR_NULL_COMPLETE	8
+
+#define TEST_J_SEL		0x1
+#define TEST_K_SEL		0x2
+#define TEST_SE0_NAK_SEL	0x3
+#define TEST_PACKET_SEL		0x4
+#define TEST_FORCE_ENABLE_SEL	0x5
+
+/* ************************************************************************* */
+/* IO
+ */
+
+enum ep_type {
+	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
+};
+
+struct s3c_ep {
+	struct usb_ep ep;
+	struct s3c_udc *dev;
+
+	const struct usb_endpoint_descriptor *desc;
+	struct list_head queue;
+	unsigned long pio_irqs;
+	int len;
+	void *dma_buf;
+
+	u8 stopped;
+	u8 bEndpointAddress;
+	u8 bmAttributes;
+
+	enum ep_type ep_type;
+	int fifo_num;
+};
+
+struct s3c_request {
+	struct usb_request req;
+	struct list_head queue;
+};
+
+struct s3c_udc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+
+	struct s3c_plat_otg_data *pdata;
+
+	void *dma_buf[S3C_MAX_ENDPOINTS+1];
+	dma_addr_t dma_addr[S3C_MAX_ENDPOINTS+1];
+
+	int ep0state;
+	struct s3c_ep ep[S3C_MAX_ENDPOINTS];
+
+	unsigned char usb_address;
+
+	unsigned req_pending:1, req_std:1, req_config:1;
+};
+
+extern struct s3c_udc *the_controller;
+
+#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN)
+#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
+
+/*-------------------------------------------------------------------------*/
+/* #define DEBUG_UDC */
+#ifdef DEBUG_UDC
+#define DBG(stuff...)		printf("udc: " stuff)
+#else
+#define DBG(stuff...)		do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_SETUP
+#define DEBUG_SETUP(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_SETUP(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_EP0
+#define DEBUG_EP0(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_EP0(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC
+#define DEBUG(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_ISR
+#define DEBUG_ISR(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_ISR(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_OUT_EP
+#define DEBUG_OUT_EP(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_OUT_EP(fmt, args...) do {} while (0)
+#endif
+
+#ifdef DEBUG_S3C_UDC_IN_EP
+#define DEBUG_IN_EP(fmt, args...) printk(fmt, ##args)
+#else
+#define DEBUG_IN_EP(fmt, args...) do {} while (0)
+#endif
+
+#define ERR(stuff...)		printf("ERR udc: " stuff)
+#define WARN(stuff...)		printf("WARNING udc: " stuff)
+#define INFO(stuff...)		printf("INFO udc: " stuff)
+
+extern void otg_phy_init(struct s3c_udc *dev);
+extern void otg_phy_off(struct s3c_udc *dev);
+
+extern void s3c_udc_ep_set_stall(struct s3c_ep *ep);
+extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
+
+struct s3c_plat_otg_data {
+	int		(*phy_control)(int on);
+	unsigned int	regs_phy;
+	unsigned int	regs_otg;
+	unsigned int    usb_phy_ctrl;
+	unsigned int    usb_flags;
+};
+#endif