* Code cleanup:LABEL_2003_06_27_2340

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

1 files changed, 1 insertions, 317 deletions

diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h
index 008008a8b..417d32fb6 100644
--- a/include/cmd_bsp.h
+++ b/include/cmd_bsp.h
@@ -24,322 +24,6 @@
 #ifndef _CMD_BSP_H_
 #define _CMD_BSP_H_
 
-#include <common.h>
-#include <command.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-
-/* ----- LWMON ---------------------------------------------------------
- */
-#if defined(CONFIG_LWMON)
-
-#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
-	"pic",	3,	4,	1,	do_pic,					\
-	"pic     - read and write PIC registers\n",				\
-	"read  reg      - read PIC register `reg'\n"				\
-	"pic write reg val  - write value `val' to PIC register `reg'\n"	\
-),  MK_CMD_TBL_ENTRY(								\
-	"kbd",	3,	1,	1,	do_kbd,					\
-	"kbd     - read keyboard status\n",					\
-	NULL									\
-),  MK_CMD_TBL_ENTRY(								\
-	"lsb",	3,	2,	1,	do_lsb,					\
-	"lsb     - check and set LSB switch\n",					\
-	"on  - switch LSB on\n"							\
-	"lsb off - switch LSB off\n"						\
-	"lsb     - print current setting\n"					\
-),
-int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_LWMON */
-/* --------------------------------------------------------------------	*/
-
-/* ----- PCU E -------------------------------------------------------- */
-#if defined(CONFIG_PCU_E)
-
-#define CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
-	"puma",	4,	4,	1,	do_puma,				\
-	"puma    - access PUMA FPGA\n",						\
-	"status - print PUMA status\n"						\
-	"puma load addr len - load PUMA configuration data\n"			\
-),
-int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_PCU_E */
-/* --------------------------------------------------------------------	*/
-
-/* ----- CCM/SCM ------------------------------------------------------ */
-#if defined(CONFIG_CCM) || defined(CONFIG_SCM)
-
-#define CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
-	"fpga",	4,	4,	1,	do_fpga,				\
-	"fpga    - access FPGA(s)\n",						\
-	"fpga status [name] - print FPGA status\n"				\
-	"fpga reset  [name] - reset FPGA\n"					\
-	"fpga load [name] addr - load FPGA configuration data\n"		\
-),
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_CCM, CONFIG_SCM */
-/* --------------------------------------------------------------------	*/
-
-/* ----- PIP405 ------------------------------------------------------- */
-#if defined(CONFIG_PIP405)
-
-#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
-	"pip405",	4,	6,	1,	do_pip405,			\
-	"pip405  - PIP405 specific Cmds\n",					\
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"					\
-	"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"					\
-	"pip405 flash mps - updates U-Boot with image from MPS\n"					\
-),
-int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_PIP405 */
-/* --------------------------------------------------------------------	*/
-
-/* ----- MIP405 ------------------------------------------------------- */
-#if defined(CONFIG_MIP405)
-
-#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
-	"mip405",	4,	6,	1,	do_mip405,			\
-	"mip405  - MIP405 specific Cmds\n",					\
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"					\
-	"mip405 flash mps - updates U-Boot with image from MPS\n"					\
-),
-int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_MIP405 */
-/* ----- VCMA9 -----------------------------------------------------------------
- */
-#if defined(CONFIG_VCMA9)
-
-#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
-	"vcma9",	4,	6,	1,	do_vcma9,	\
-	"vcma9   - VCMA9 specific Cmds\n",			\
-	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"					\
-),
-int do_vcma9 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_VCMA9 */
-/* ----------------------------------------------------------------------------*/
-
-/* ----- DASA_SIM ----------------------------------------------------- */
-#if defined(CONFIG_DASA_SIM)
-
-#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				                \
-	"pci9054",	7,	3,	1,	do_pci9054,			\
-	"pci9054 - PLX PCI9054 EEPROM access\n",				\
-	"pci9054 info - print EEPROM values\n"		                        \
-	"pci9054 update - updates EEPROM with default values\n"			\
-),
-int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif /* CONFIG_DASA_SIM */
-/* --------------------------------------------------------------------	*/
-
-/* ----- HYMOD -------------------------------------------------------- */
-#if defined(CONFIG_HYMOD)
-
-#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(				\
-	"fpga",	4,	6,	1,	do_fpga,			\
-	"fpga    - FPGA sub-system\n",					\
-	"load [type] addr size\n"					\
-	"  - write the configuration data at memory address `addr',\n"	\
-	"    size `size' bytes, into the FPGA of type `type' (either\n"	\
-	"    `main' or `mezz', default `main'). e.g.\n"			\
-	"        `fpga load 100000 7d8f'\n"				\
-	"    loads the main FPGA with config data at address 100000\n"	\
-	"    HEX, size 7d8f HEX (32143 DEC) bytes\n"			\
-	"fpga tftp file addr\n"						\
-	"  - transfers `file' from the tftp server into memory at\n"	\
-	"    address `addr', then writes the entire file contents\n"	\
-	"    into the main FPGA\n"					\
-	"fpga store addr\n"						\
-	"  - read configuration data from the main FPGA (the mezz\n"	\
-	"    FPGA is write-only), into address `addr'. There must be\n"	\
-	"    enough memory available at `addr' to hold all the config\n"\
-	"    data - the size of which is determined by VC:???\n"	\
-	"fpga info\n"							\
-	"  - print information about the Hymod FPGA, namely the\n"	\
-	"    memory addresses at which the four FPGA local bus\n"	\
-	"    address spaces appear in the physical address space\n"	\
-), MK_CMD_TBL_ENTRY(							\
-	"eeclear", 4,	1,	0,	do_eecl,			\
-	"eeclear - Clear the eeprom on a Hymod board\n",		\
-	"[type]\n"							\
-	"  - write zeroes into the EEPROM on the board of type `type'\n"\
-	"    (`type' is either `main' or `mezz' - default `main')\n"	\
-	"    Note: the EEPROM write enable jumper must be installed\n"	\
-), MK_CMD_TBL_ENTRY(							\
-	"htest", 5,	1,	0,	do_htest,			\
-	"htest   - run HYMOD tests\n",					\
-	NULL								\
-),
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_htest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_HYMOD */
-/* --------------------------------------------------------------------	*/
-
-/* ----- CRAY405 (L1) ------------------------------------------------- */
-#if defined (CONFIG_CRAYL1)
-#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(						\
-	"L1cmd",	5,	4,	1,	do_crayL1,			\
-	"L1cmd  - L1 update, setup, commands \n",				\
-	"L1cmd update - update flash images from host\n"			\
-	"L1cmd boot - nfs or ramboot L1\n"					\
-),
-int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-#endif /* CONFIG_CRAY405 */
-/* --------------------------------------------------------------------	*/
-
-/* ----- EVB64260 ----------------------------------------------------- */
-#if defined (CONFIG_EVB64260)
-#ifdef CONFIG_ZUMA_V2
-#define CMD_TBL_BSP  ZUMA_TBL_ENTRY
-
-#define ZUMA_TBL_ENTRY	MK_CMD_TBL_ENTRY(				\
-	"zinit",	 5,	 1,	 0,	 do_zuma_init_pbb,	\
-	"zinit   - init zuma pbb\n",					\
-	"\n"								\
-	"    - init zuma pbb\n"						\
-), MK_CMD_TBL_ENTRY(							\
-	"zdtest",	  6,	  3,	  1,	  do_zuma_test_dma,	\
-	"zdtest  - run dma test\n",					\
-	"[cmd [count]]\n"						\
-	"    - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
-), MK_CMD_TBL_ENTRY(							\
-	"zminit",	  5,	  1,	  0,	  do_zuma_init_mbox,	\
-	"zminit  - init zuma mbox\n",				\
-	"\n"								\
-	"    - init zuma mbox\n"					\
-),
-
-int do_zuma_init_pbb  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_zuma_test_dma  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-void zuma_init_pbb(void);
-int zuma_mbox_init(void);
-int zuma_test_dma(int cmd, int size);
-#else
-#define CMD_TBL_BSP
-#endif /* ZUMA_NTL */
-
-#endif /* CONFIG_EVB64260 */
-/* --------------------------------------------------------------------	*/
-
-/* -----W7O------------------------------------------------------------ */
-#if defined(CONFIG_W7O)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY(			\
-	  "vpd",	3,	2,	1,	do_vpd, \
-	  "vpd     - Read Vital Product Data\n",	\
-	  "[dev_addr]\n"				\
-	  "        - Read VPD Data from default address, or device address 'dev_addr'.\n" \
-),
-
-extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
-
-#endif	/* CONFIG_W7O */
-/* --------------------------------------------------------------------	*/
-
-/* ---- PCIPPC2 / PCIPPC6 --------------------------------------------- */
-#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
-#if defined(CONFIG_WATCHDOG)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY(			\
-	"wd",	3,	2,	1,	do_wd,		\
-	"wd      - check and set watchdog\n",		\
-	"on   - switch watchDog on\n"			\
-	"wd off  - switch watchdog off\n"		\
-	"wd      - print current status\n"		\
-),
-
-extern int do_wd (cmd_tbl_t *, int, int, char *[]);
-
-#else
-#define CMD_TBL_BSP
-#endif  /* CONFIG_WATCHDOG */
-
-#endif	/* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
-/* --------------------------------------------------------------------	*/
-
-/* ----- PN62 --------------------------------------------------------- */
-#if defined(CONFIG_PN62)
-
-#define CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
-	"loadpci",	5,	2,	1,	do_loadpci, 	\
-	"loadpci - load binary file over PCI\n",		\
-	"[addr]\n"						\
-	"    - load binary file over PCI to address 'addr'\n"	\
-), MK_CMD_TBL_ENTRY( 	 	 	 	 	 	\
-	"led"    ,	3,	3,	1,	do_led, 	\
-	"led     - set LED 0..11 on the PN62 board\n",		\
-	"i fun\n"						\
-	"    - set 'i'th LED to function 'fun'\n"		\
-),
-
-extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
-extern int do_led (cmd_tbl_t *, int, int, char *[]);
-#endif /* CONFIG_PN62 */
-/* --------------------------------------------------------------------	*/
-
-/* ----- TRAB --------------------------------------------------------- */
-#if defined(CONFIG_TRAB)
-
-#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(			\
-	"kbd",	3,	1,	1,	do_kbd,			\
-	"kbd     - read keyboard status\n",			\
-	NULL							\
-),
-
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_TRAB */
-/* --------------------------------------------------------------------	*/
-
-/* ----- R360MPI ------------------------------------------------------ */
-#if defined(CONFIG_R360MPI)
-
-#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(			\
-	"kbd",	3,	1,	1,	do_kbd,			\
-	"kbd     - read keyboard status\n",			\
-	NULL							\
-),
-
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_R360MPI */
-/* --------------------------------------------------------------------	*/
-
-/* ------ AMIGAONEG3SE ------------------------------------------------ */
-#if defined(CONFIG_AMIGAONEG3SE)
-
-#define CMD_TBL_BSP	/* dummy */
-
-#endif  /* AmigaOneG3SE */
-/* ----- PCI405 ------------------------------------------------------- */
-#if defined(CONFIG_PCI405)
-
-#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(			\
-	"loadpci",	7,	1,	1,	do_loadpci,	\
-	"loadpci - wait for sync and boot image\n",		\
-	NULL							\
-),
-
-int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-#endif	/* CONFIG_PCI405 */
-/* -------------------------------------------------------------------- */
-
-#else
-#define CMD_TBL_BSP
-#endif	/* CFG_CMD_BSP */
+/* do not edit this file */
 
 #endif	/* _CMD_BSP_H_ */