Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 41 insertions, 3 deletions

diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h
index 380cb4c92..a547337e7 100644
--- a/drivers/usb/usb_ohci.h
+++ b/drivers/usb/usb_ohci.h
@@ -38,6 +38,41 @@ static int cc_to_error[16] = {
 	/* Not Access */	       -1
 };
 
+static const char *cc_to_string[16] = {
+	"No Error",
+	"CRC: Last data packet from endpoint contained a CRC error.",
+	"BITSTUFFING: Last data packet from endpoint contained a bit " \
+		     "stuffing violation",
+	"DATATOGGLEMISMATCH: Last packet from endpoint had data toggle PID\n" \
+		     "that did not match the expected value.",
+	"STALL: TD was moved to the Done Queue because the endpoint returned" \
+		     " a STALL PID",
+	"DEVICENOTRESPONDING: Device did not respond to token (IN) or did\n" \
+		     "not provide a handshake (OUT)",
+	"PIDCHECKFAILURE: Check bits on PID from endpoint failed on data PID\n"\
+		     "(IN) or handshake (OUT)",
+	"UNEXPECTEDPID: Receive PID was not valid when encountered or PID\n" \
+		     "value is not defined.",
+	"DATAOVERRUN: The amount of data returned by the endpoint exceeded\n" \
+		     "either the size of the maximum data packet allowed\n" \
+		     "from the endpoint (found in MaximumPacketSize field\n" \
+		     "of ED) or the remaining buffer size.",
+	"DATAUNDERRUN: The endpoint returned less than MaximumPacketSize\n" \
+		     "and that amount was not sufficient to fill the\n" \
+		     "specified buffer",
+	"reserved1",
+	"reserved2",
+	"BUFFEROVERRUN: During an IN, HC received data from endpoint faster\n" \
+		     "than it could be written to system memory",
+	"BUFFERUNDERRUN: During an OUT, HC could not retrieve data from\n" \
+		     "system memory fast enough to keep up with data USB " \
+		     "data rate.",
+	"NOT ACCESSED: This code is set by software before the TD is placed" \
+		     "on a list to be processed by the HC.(1)",
+	"NOT ACCESSED: This code is set by software before the TD is placed" \
+		     "on a list to be processed by the HC.(2)",
+};
+
 /* ED States */
 
 #define ED_NEW		0x00
@@ -155,8 +190,8 @@ struct ohci_hcca {
 /*
  * Maximum number of root hub ports.
  */
-#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
-# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
+# error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!"
 #endif
 
 /*
@@ -191,10 +226,13 @@ struct ohci_regs {
 		__u32	a;
 		__u32	b;
 		__u32	status;
-		__u32	portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
+		__u32	portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS];
 	} roothub;
 } __attribute((aligned(32)));
 
+/* Some EHCI controls */
+#define EHCI_USBCMD_OFF		0x20
+#define EHCI_USBCMD_HCRESET	(1 << 1)
 
 /* OHCI CONTROL AND STATUS REGISTER MASKS */