[FIX] remove files form repository

1 files changed, 0 insertions, 376 deletions

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
deleted file mode 100644
index 5d8eaa518..000000000
--- a/drivers/net/xilinx_emaclite.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <net.h>
-#include <config.h>
-#include <asm/io.h>
-
-#ifdef XILINX_EMACLITE_BASEADDR
-
-#undef DEBUG
-
-#define ENET_MAX_MTU		PKTSIZE
-#define ENET_MAX_MTU_ALIGNED	PKTSIZE_ALIGN
-#define ENET_ADDR_LENGTH	6
-
-/* EmacLite constants */
-#define XEL_BUFFER_OFFSET	0x0800	/* Next buffer's offset */
-#define XEL_TPLR_OFFSET		0x07F4	/* Tx packet length */
-#define XEL_TSR_OFFSET		0x07FC	/* Tx status */
-#define XEL_RSR_OFFSET		0x17FC	/* Rx status */
-#define XEL_RXBUFF_OFFSET	0x1000	/* Receive Buffer */
-
-/* Xmit complete */
-#define XEL_TSR_XMIT_BUSY_MASK		0x00000001UL
-/* Xmit interrupt enable bit */
-#define XEL_TSR_XMIT_IE_MASK		0x00000008UL
-/* Buffer is active, SW bit only */
-#define XEL_TSR_XMIT_ACTIVE_MASK	0x80000000UL
-/* Program the MAC address */
-#define XEL_TSR_PROGRAM_MASK		0x00000002UL
-/* define for programming the MAC address into the EMAC Lite */
-#define XEL_TSR_PROG_MAC_ADDR	(XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
-
-/* Transmit packet length upper byte */
-#define XEL_TPLR_LENGTH_MASK_HI		0x0000FF00UL
-/* Transmit packet length lower byte */
-#define XEL_TPLR_LENGTH_MASK_LO		0x000000FFUL
-
-/* Recv complete */
-#define XEL_RSR_RECV_DONE_MASK		0x00000001UL
-/* Recv interrupt enable bit */
-#define XEL_RSR_RECV_IE_MASK		0x00000008UL
-
-typedef struct {
-	unsigned int baseaddress;	/* Base address for device (IPIF) */
-	unsigned int nexttxbuffertouse;	/* Next TX buffer to write to */
-	unsigned int nextrxbuffertouse;	/* Next RX buffer to read from */
-	unsigned char deviceid;		/* Unique ID of device - for future */
-} xemaclite;
-
-static xemaclite emaclite;
-
-static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
-
-/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CFG_ENV_IS_NOWHERE
-static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-#endif
-
-void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
-{
-	unsigned int i;
-	u32 alignbuffer;
-	u32 *to32ptr;
-	u32 *from32ptr;
-	u8 *to8ptr;
-	u8 *from8ptr;
-
-	from32ptr = (u32 *) srcptr;
-
-	/* Word aligned buffer, no correction needed. */
-	to32ptr = (u32 *) destptr;
-	while (bytecount > 3) {
-		*to32ptr++ = *from32ptr++;
-		bytecount -= 4;
-	}
-	to8ptr = (u8 *) to32ptr;
-
-	alignbuffer = *from32ptr++;
-	from8ptr = (u8 *) & alignbuffer;
-
-	for (i = 0; i < bytecount; i++) {
-		*to8ptr++ = *from8ptr++;
-	}
-}
-
-void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
-{
-	unsigned i;
-	u32 alignbuffer;
-	u32 *to32ptr = (u32 *) destptr;
-	u32 *from32ptr;
-	u8 *to8ptr;
-	u8 *from8ptr;
-
-	from32ptr = (u32 *) srcptr;
-	while (bytecount > 3) {
-
-		*to32ptr++ = *from32ptr++;
-		bytecount -= 4;
-	}
-
-	alignbuffer = 0;
-	to8ptr = (u8 *) & alignbuffer;
-	from8ptr = (u8 *) from32ptr;
-
-	for (i = 0; i < bytecount; i++) {
-		*to8ptr++ = *from8ptr++;
-	}
-
-	*to32ptr++ = alignbuffer;
-}
-
-void eth_halt (void)
-{
-#ifdef DEBUG
-	puts ("eth_halt\n");
-#endif
-}
-
-int eth_init (bd_t * bis)
-{
-#ifdef DEBUG
-	puts ("EmacLite Initialization Started\n");
-#endif
-	memset (&emaclite, 0, sizeof (xemaclite));
-	emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
-
-	if (!getenv("ethaddr")) {
-		memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
-	}
-
-/*
- * TX - TX_PING & TX_PONG initialization
- */
-	/* Restart PING TX */
-	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
-	/* Copy MAC address */
-	xemaclite_alignedwrite (bis->bi_enetaddr,
-		emaclite.baseaddress, ENET_ADDR_LENGTH);
-	/* Set the length */
-	out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
-	/* Update the MAC address in the EMAC Lite */
-	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
-	/* Wait for EMAC Lite to finish with the MAC address update */
-	while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
-		XEL_TSR_PROG_MAC_ADDR) != 0) ;
-
-#ifdef XILINX_EMACLITE_TX_PING_PONG
-	/* The same operation with PONG TX */
-	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
-	xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress +
-		XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
-	out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
-	out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
-		XEL_TSR_PROG_MAC_ADDR);
-	while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
-		 XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
-#endif
-
-/*
- * RX - RX_PING & RX_PONG initialization
- */
-	/* Write out the value to flush the RX buffer */
-	out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
-#ifdef XILINX_EMACLITE_RX_PING_PONG
-	out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
-		XEL_RSR_RECV_IE_MASK);
-#endif
-
-#ifdef DEBUG
-	puts ("EmacLite Initialization complete\n");
-#endif
-	return 0;
-}
-
-int xemaclite_txbufferavailable (xemaclite * instanceptr)
-{
-	u32 reg;
-	u32 txpingbusy;
-	u32 txpongbusy;
-	/*
-	 * Read the other buffer register
-	 * and determine if the other buffer is available
-	 */
-	reg = in_be32 (instanceptr->baseaddress +
-			instanceptr->nexttxbuffertouse + 0);
-	txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
-			XEL_TSR_XMIT_BUSY_MASK);
-
-	reg = in_be32 (instanceptr->baseaddress +
-			(instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
-	txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
-			XEL_TSR_XMIT_BUSY_MASK);
-
-	return (!(txpingbusy && txpongbusy));
-}
-
-int eth_send (volatile void *ptr, int len) {
-
-	unsigned int reg;
-	unsigned int baseaddress;
-
-	unsigned maxtry = 1000;
-
-	if (len > ENET_MAX_MTU)
-		len = ENET_MAX_MTU;
-
-	while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
-		udelay (10);
-		maxtry--;
-	}
-
-	if (!maxtry) {
-		printf ("Error: Timeout waiting for ethernet TX buffer\n");
-		/* Restart PING TX */
-		out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
-#ifdef XILINX_EMACLITE_TX_PING_PONG
-		out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
-		XEL_BUFFER_OFFSET, 0);
-#endif
-		return 0;
-	}
-
-	/* Determine the expected TX buffer address */
-	baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
-
-	/* Determine if the expected buffer address is empty */
-	reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
-	if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
-		&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
-			& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
-
-#ifdef XILINX_EMACLITE_TX_PING_PONG
-		emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
-#endif
-#ifdef DEBUG
-		printf ("Send packet from 0x%x\n", baseaddress);
-#endif
-		/* Write the frame to the buffer */
-		xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
-		out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
-			(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
-		reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
-		reg |= XEL_TSR_XMIT_BUSY_MASK;
-		if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
-			reg |= XEL_TSR_XMIT_ACTIVE_MASK;
-		}
-		out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
-		return 1;
-	}
-#ifdef XILINX_EMACLITE_TX_PING_PONG
-	/* Switch to second buffer */
-	baseaddress ^= XEL_BUFFER_OFFSET;
-	/* Determine if the expected buffer address is empty */
-	reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
-	if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
-		&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
-			& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
-#ifdef DEBUG
-		printf ("Send packet from 0x%x\n", baseaddress);
-#endif
-		/* Write the frame to the buffer */
-		xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
-		out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
-			(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
-		reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
-		reg |= XEL_TSR_XMIT_BUSY_MASK;
-		if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
-			reg |= XEL_TSR_XMIT_ACTIVE_MASK;
-		}
-		out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
-		return 1;
-	}
-#endif
-	puts ("Error while sending frame\n");
-	return 0;
-}
-
-int eth_rx (void)
-{
-	unsigned int length;
-	unsigned int reg;
-	unsigned int baseaddress;
-
-	baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
-	reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
-#ifdef DEBUG
-	printf ("Testing data at address 0x%x\n", baseaddress);
-#endif
-	if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
-#ifdef XILINX_EMACLITE_RX_PING_PONG
-		emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
-#endif
-	} else {
-#ifndef XILINX_EMACLITE_RX_PING_PONG
-#ifdef DEBUG
-		printf ("No data was available - address 0x%x\n", baseaddress);
-#endif
-		return 0;
-#else
-		baseaddress ^= XEL_BUFFER_OFFSET;
-		reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
-		if ((reg & XEL_RSR_RECV_DONE_MASK) !=
-					XEL_RSR_RECV_DONE_MASK) {
-#ifdef DEBUG
-			printf ("No data was available - address 0x%x\n",
-					baseaddress);
-#endif
-			return 0;
-		}
-#endif
-	}
-	/* Get the length of the frame that arrived */
-	switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
-			0xFFFF0000 ) >> 16) {
-		case 0x806:
-			length = 42 + 20; /* FIXME size of ARP */
-#ifdef DEBUG
-			puts ("ARP Packet\n");
-#endif
-			break;
-		case 0x800:
-			length = 14 + 14 +
-			(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
-			0xFFFF0000) >> 16); /* FIXME size of IP packet */
-#ifdef DEBUG
-			puts("IP Packet\n");
-#endif
-			break;
-		default:
-#ifdef DEBUG
-			puts("Other Packet\n");
-#endif
-			length = ENET_MAX_MTU;
-			break;
-	}
-
-	xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
-			etherrxbuff, length);
-
-	/* Acknowledge the frame */
-	reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
-	reg &= ~XEL_RSR_RECV_DONE_MASK;
-	out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
-
-#ifdef DEBUG
-	printf ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
-#endif
-	NetReceive ((uchar *) etherrxbuff, length);
-	return 1;
-
-}
-#endif